diff options
Diffstat (limited to 'crypto/openssl/Makefile.org')
-rw-r--r-- | crypto/openssl/Makefile.org | 752 |
1 files changed, 210 insertions, 542 deletions
diff --git a/crypto/openssl/Makefile.org b/crypto/openssl/Makefile.org index 7a30aca..eaa9a11 100644 --- a/crypto/openssl/Makefile.org +++ b/crypto/openssl/Makefile.org @@ -57,9 +57,8 @@ OPENSSLDIR=/usr/local/ssl # equal 4. # PKCS1_CHECK - pkcs1 tests. -CC= gcc -#CFLAG= -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized -DSHA1_ASM -DMD5_ASM -DRMD160_ASM -CFLAG= -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall -DSHA1_ASM -DMD5_ASM -DRMD160_ASM +CC= cc +CFLAG= -O DEPFLAG= PEX_LIBS= EX_LIBS= @@ -80,113 +79,45 @@ MAKEDEPPROG=makedepend AS=$(CC) -c ASFLAG=$(CFLAG) -# Set BN_ASM to bn_asm.o if you want to use the C version -BN_ASM= bn_asm.o -#BN_ASM= bn_asm.o -#BN_ASM= asm/bn86-elf.o # elf, linux-elf -#BN_ASM= asm/bn86-sol.o # solaris -#BN_ASM= asm/bn86-out.o # a.out, FreeBSD -#BN_ASM= asm/bn86bsdi.o # bsdi -#BN_ASM= asm/alpha.o # DEC Alpha -#BN_ASM= asm/pa-risc2.o # HP-UX PA-RISC -#BN_ASM= asm/r3000.o # SGI MIPS cpu -#BN_ASM= asm/sparc.o # Sun solaris/SunOS -#BN_ASM= asm/bn-win32.o # Windows 95/NT -#BN_ASM= asm/x86w16.o # 16 bit code for Windows 3.1/DOS -#BN_ASM= asm/x86w32.o # 32 bit code for Windows 3.1 - # For x86 assembler: Set PROCESSOR to 386 if you want to support # the 80386. PROCESSOR= -# Set DES_ENC to des_enc.o if you want to use the C version -#There are 4 x86 assember options. -FIPS_DES_ENC= des_enc.o fcrypt_b.o -DES_ENC= asm/dx86-out.o asm/yx86-out.o -#DES_ENC= des_enc.o fcrypt_b.o # C -#DES_ENC= asm/dx86-elf.o asm/yx86-elf.o # elf -#DES_ENC= asm/dx86-sol.o asm/yx86-sol.o # solaris -#DES_ENC= asm/dx86-out.o asm/yx86-out.o # a.out, FreeBSD -#DES_ENC= asm/dx86bsdi.o asm/yx86bsdi.o # bsdi - -# Set BF_ENC to bf_enc.o if you want to use the C version -#There are 4 x86 assember options. -BF_ENC= asm/bx86-out.o -#BF_ENC= bf_enc.o -#BF_ENC= asm/bx86-elf.o # elf -#BF_ENC= asm/bx86-sol.o # solaris -#BF_ENC= asm/bx86-out.o # a.out, FreeBSD -#BF_ENC= asm/bx86bsdi.o # bsdi - -# Set CAST_ENC to c_enc.o if you want to use the C version -#There are 4 x86 assember options. -CAST_ENC= asm/cx86-out.o -#CAST_ENC= c_enc.o -#CAST_ENC= asm/cx86-elf.o # elf -#CAST_ENC= asm/cx86-sol.o # solaris -#CAST_ENC= asm/cx86-out.o # a.out, FreeBSD -#CAST_ENC= asm/cx86bsdi.o # bsdi - -# Set RC4_ENC to rc4_enc.o if you want to use the C version -#There are 4 x86 assember options. -RC4_ENC= asm/rx86-out.o -#RC4_ENC= rc4_enc.o -#RC4_ENC= asm/rx86-elf.o # elf -#RC4_ENC= asm/rx86-sol.o # solaris -#RC4_ENC= asm/rx86-out.o # a.out, FreeBSD -#RC4_ENC= asm/rx86bsdi.o # bsdi - -# Set RC5_ENC to rc5_enc.o if you want to use the C version -#There are 4 x86 assember options. -RC5_ENC= asm/r586-out.o -#RC5_ENC= rc5_enc.o -#RC5_ENC= asm/r586-elf.o # elf -#RC5_ENC= asm/r586-sol.o # solaris -#RC5_ENC= asm/r586-out.o # a.out, FreeBSD -#RC5_ENC= asm/r586bsdi.o # bsdi - -# Also need MD5_ASM defined -MD5_ASM_OBJ= asm/mx86-out.o -#MD5_ASM_OBJ= asm/mx86-elf.o # elf -#MD5_ASM_OBJ= asm/mx86-sol.o # solaris -#MD5_ASM_OBJ= asm/mx86-out.o # a.out, FreeBSD -#MD5_ASM_OBJ= asm/mx86bsdi.o # bsdi - -# Also need SHA1_ASM defined -SHA1_ASM_OBJ= asm/sx86-out.o -FIPS_SHA1_ASM_OBJ= asm/sx86-out.o -#SHA1_ASM_OBJ= asm/sx86-elf.o # elf -#SHA1_ASM_OBJ= asm/sx86-sol.o # solaris -#SHA1_ASM_OBJ= asm/sx86-out.o # a.out, FreeBSD -#SHA1_ASM_OBJ= asm/sx86bsdi.o # bsdi - -# Also need RMD160_ASM defined -RMD160_ASM_OBJ= asm/rm86-out.o -#RMD160_ASM_OBJ= asm/rm86-elf.o # elf -#RMD160_ASM_OBJ= asm/rm86-sol.o # solaris -#RMD160_ASM_OBJ= asm/rm86-out.o # a.out, FreeBSD -#RMD160_ASM_OBJ= asm/rm86bsdi.o # bsdi +# CPUID module collects small commonly used assembler snippets +CPUID_OBJ= +BN_ASM= bn_asm.o +DES_ENC= des_enc.o fcrypt_b.o +AES_ASM_OBJ=aes_core.o aes_cbc.o +BF_ENC= bf_enc.o +CAST_ENC= c_enc.o +RC4_ENC= rc4_enc.o +RC5_ENC= rc5_enc.o +MD5_ASM_OBJ= +SHA1_ASM_OBJ= +RMD160_ASM_OBJ= # KRB5 stuff KRB5_INCLUDES= LIBKRB5= -# When we're prepared to use shared libraries in the programs we link here -# we might set SHLIB_MARK to '$(SHARED_LIBS)'. -SHLIB_MARK= +# Zlib stuff +ZLIB_INCLUDE= +LIBZLIB= -DIRS= crypto fips ssl $(SHLIB_MARK) sigs apps test tools -SHLIBDIRS= fips crypto ssl +DIRS= crypto ssl engines apps test tools +SHLIBDIRS= crypto ssl # dirs in crypto to build -SDIRS= objects \ +SDIRS= \ + objects \ md2 md4 md5 sha mdc2 hmac ripemd \ - des rc2 rc4 rc5 idea bf cast \ - bn ec rsa dsa dh dso engine aes \ + des aes rc2 rc4 rc5 idea bf cast \ + bn ec rsa dsa ecdsa dh ecdh dso engine \ buffer bio stack lhash rand err \ - evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 - -FDIRS= sha1 rand des aes dsa rsa dh + evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \ + store pqueue +# keep in mind that the above list is adjusted by ./Configure +# according to no-xxx arguments... # tests to perform. "alltests" is a special word indicating that all tests # should be performed. @@ -205,7 +136,6 @@ ONEDIRS=out tmp EDIRS= times doc bugs util include certs ms shlib mt demos perl sf dep VMS WDIRS= windows LIBS= libcrypto.a libssl.a -SIGS= libcrypto.a.sha1 SHARED_CRYPTO=libcrypto$(SHLIB_EXT) SHARED_SSL=libssl$(SHLIB_EXT) SHARED_LIBS= @@ -220,45 +150,106 @@ WTARFILE= $(NAME)-win.tar EXHEADER= e_os2.h HEADER= e_os.h -# When we're prepared to use shared libraries in the programs we link here -# we might remove 'clean-shared' from the targets to perform at this stage +all: Makefile build_all openssl.pc libssl.pc libcrypto.pc + +# as we stick to -e, CLEARENV ensures that local variables in lower +# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn +# shell, which [annoyingly enough] terminates unset with error if VAR +# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh, +# which terminates unset with error if no variable was present:-( +CLEARENV= TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS} \ + $${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES} \ + $${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC} \ + $${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL} \ + $${EXHEADER+EXHEADER} $${HEADER+HEADER} \ + $${GENERAL+GENERAL} $${CFLAGS+CFLAGS} \ + $${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS} \ + $${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} \ + $${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS} \ + $${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS} + +BUILDENV= PLATFORM='${PLATFORM}' PROCESSOR='${PROCESSOR}' \ + CC='${CC}' CFLAG='${CFLAG}' \ + AS='${CC}' ASFLAG='${CFLAG} -c' \ + AR='${AR}' PERL='${PERL}' RANLIB='${RANLIB}' \ + SDIRS='${SDIRS}' LIBRPATH='${INSTALLTOP}/lib' \ + INSTALL_PREFIX='${INSTALL_PREFIX}' \ + INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' \ + MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD ${MAKEDEPPROG}' \ + DEPFLAG='-DOPENSSL_NO_DEPRECATED ${DEPFLAG}' \ + MAKEDEPPROG='${MAKEDEPPROG}' \ + SHARED_LDFLAGS='${SHARED_LDFLAGS}' \ + KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' \ + EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' \ + SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' \ + PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' \ + CPUID_OBJ='${CPUID_OBJ}' \ + BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' \ + AES_ASM_OBJ='${AES_ASM_OBJ}' \ + BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' \ + RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' \ + SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' \ + MD5_ASM_OBJ='${MD5_ASM_OBJ}' \ + RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' \ + THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES= +# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors, +# which in turn eliminates ambiguities in variable treatment with -e. + +# BUILD_CMD is a generic macro to build a given target in a given +# subdirectory. The target must be given through the shell variable +# `target' and the subdirectory to build in must be given through `dir'. +# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or +# BUILD_ONE_CMD instead. +# +# BUILD_ONE_CMD is a macro to build a given target in a given +# subdirectory if that subdirectory is part of $(DIRS). It requires +# exactly the same shell variables as BUILD_CMD. +# +# RECURSIVE_BUILD_CMD is a macro to build a given target in all +# subdirectories defined in $(DIRS). It requires that the target +# is given through the shell variable `target'. +BUILD_CMD= if [ -d "$$dir" ]; then \ + ( cd $$dir && echo "making $$target in $$dir..." && \ + $(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \ + ) || exit 1; \ + fi +RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done +BUILD_ONE_CMD=\ + if echo " $(DIRS) " | grep " $$dir " >/dev/null 2>/dev/null; then \ + $(BUILD_CMD); \ + fi -all: Makefile sub_all openssl.pc +reflect: + @[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV) -sigs: $(SIGS) -libcrypto.a.sha1: libcrypto.a - if egrep 'define OPENSSL_FIPS' $(TOP)/include/openssl/opensslconf.h > /dev/null; then \ - $(RANLIB) libcrypto.a; \ - fips/sha1/fips_standalone_sha1 libcrypto.a > libcrypto.a.sha1; \ - fi +sub_all: build_all +build_all: build_libs build_apps build_tests build_tools -sub_all: - @for i in $(DIRS); \ - do \ - if [ -d "$$i" ]; then \ - (cd $$i && echo "making all in $$i..." && \ - $(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' AS='${AS}' ASFLAG='${ASFLAG}' SDIRS='$(SDIRS)' FDIRS='$(FDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' FIPS_DES_ENC='${FIPS_DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' FIPS_SHA1_ASM_OBJ='${FIPS_SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' all ) || exit 1; \ - else \ - $(MAKE) $$i; \ - fi; \ - done; +build_libs: build_crypto build_ssl build_engines -sub_target: - @for i in $(DIRS); \ - do \ - if [ -d "$$i" ]; then \ - (cd $$i && echo "making $(TARGET) in $$i..." && \ - $(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' AS='${AS}' ASFLAG='${ASFLAG}' SDIRS='$(SDIRS)' FDIRS='$(FDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' FIPS_DES_ENC='${FIPS_DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' FIPS_SHA1_ASM_OBJ='${FIPS_SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TARGET='$(TARGET)' sub_target ) || exit 1; \ - else \ - $(MAKE) $$i; \ - fi; \ - done; +build_crypto: + @dir=crypto; target=all; $(BUILD_ONE_CMD) +build_ssl: + @dir=ssl; target=all; $(BUILD_ONE_CMD) +build_engines: + @dir=engines; target=all; $(BUILD_ONE_CMD) +build_apps: + @dir=apps; target=all; $(BUILD_ONE_CMD) +build_tests: + @dir=test; target=all; $(BUILD_ONE_CMD) +build_tools: + @dir=tools; target=all; $(BUILD_ONE_CMD) + +all_testapps: build_libs build_testapps +build_testapps: + @dir=crypto; target=testapps; $(BUILD_ONE_CMD) libcrypto$(SHLIB_EXT): libcrypto.a @if [ "$(SHLIB_TARGET)" != "" ]; then \ $(MAKE) SHLIBDIRS=crypto build-shared; \ else \ echo "There's no support for shared libraries on this platform" >&2; \ + exit 1; \ fi libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a @@ -266,10 +257,11 @@ libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a $(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \ else \ echo "There's no support for shared libraries on this platform" >&2; \ + exit 1; \ fi clean-shared: - @for i in $(SHLIBDIRS); do \ + @set -e; for i in $(SHLIBDIRS); do \ if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \ tmp="$(SHARED_LIBS_LINK_EXTS)"; \ for j in $${tmp:-x}; do \ @@ -278,327 +270,59 @@ clean-shared: fi; \ ( set -x; rm -f lib$$i$(SHLIB_EXT) ); \ if [ "$(PLATFORM)" = "Cygwin" ]; then \ - ( set -x; rm -f cyg$$i-$(SHLIB_VERSION_NUMBER)$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \ + ( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \ fi; \ done link-shared: - @if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \ - tmp="$(SHARED_LIBS_LINK_EXTS)"; \ - for i in $(SHLIBDIRS); do \ - prev=lib$$i$(SHLIB_EXT); \ - for j in $${tmp:-x}; do \ - ( set -x; \ - rm -f lib$$i$$j; ln -s $$prev lib$$i$$j ); \ - prev=lib$$i$$j; \ - done; \ - done; \ - fi - -build-shared: clean-shared do_$(SHLIB_TARGET) link-shared - -do_bsd-gcc-shared: do_gnu-shared -do_linux-shared: do_gnu-shared -do_gnu-shared: - libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \ - if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \ - libs="$(LIBKRB5) $$libs"; \ - fi; \ - ( set -x; ${CC} ${SHARED_LDFLAGS} \ - -shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \ - -Wl,-soname=lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \ - -Wl,-Bsymbolic \ - -Wl,--whole-archive lib$$i.a \ - -Wl,--no-whole-archive $$libs ${EX_LIBS} -lc ) || exit 1; \ - libs="-l$$i $$libs"; \ - done - -DETECT_GNU_LD=(${CC} -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null - -# For Darwin AKA Mac OS/X (dyld) -do_darwin-shared: - libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \ - if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \ - libs="$(LIBKRB5) $$libs"; \ - fi; \ - ( set -x; ${CC} --verbose -dynamiclib -o lib$$i${SHLIB_EXT} \ - lib$$i.a $$libs -all_load -current_version ${SHLIB_MAJOR}.${SHLIB_MINOR} \ - -compatibility_version ${SHLIB_MAJOR}.`echo ${SHLIB_MINOR} | cut -d. -f1` \ - -install_name ${INSTALLTOP}/lib/lib$$i${SHLIB_EXT} ) || exit 1; \ - libs="-l`basename $$i${SHLIB_EXT} .dylib` $$libs"; \ - echo "" ; \ + @ set -e; for i in ${SHLIBDIRS}; do \ + $(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \ + LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \ + LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \ + symlink.$(SHLIB_TARGET); \ + libs="$$libs -l$$i"; \ done -do_cygwin-shared: - libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \ - if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \ - libs="$(LIBKRB5) $$libs"; \ - fi; \ - ( set -x; ${CC} -shared -o cyg$$i-$(SHLIB_VERSION_NUMBER).dll \ - -Wl,-Bsymbolic \ - -Wl,--whole-archive lib$$i.a \ - -Wl,--out-implib,lib$$i.dll.a \ - -Wl,--no-whole-archive $$libs ) || exit 1; \ - libs="-l$$i $$libs"; \ - done - -# This assumes that GNU utilities are *not* used -do_alpha-osf1-shared: - if ${DETECT_GNU_LD}; then \ - $(MAKE) do_gnu-shared; \ - else \ - libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \ - if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \ - libs="$(LIBKRB5) $$libs"; \ - fi; \ - ( set -x; ${CC} ${SHARED_LDFLAGS} \ - -shared -o lib$$i.so \ - -set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \ - -all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \ - libs="-l$$i $$libs"; \ - done; \ - fi - -# This assumes that GNU utilities are *not* used -# The difference between alpha-osf1-shared and tru64-shared is the `-msym' -# option passed to the linker. -do_tru64-shared: - if ${DETECT_GNU_LD}; then \ - $(MAKE) do_gnu-shared; \ - else \ - libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \ - if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \ - libs="$(LIBKRB5) $$libs"; \ - fi; \ - ( set -x; ${CC} ${SHARED_LDFLAGS} \ - -shared -msym -o lib$$i.so \ - -set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \ - -all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \ - libs="-l$$i $$libs"; \ - done; \ - fi - -# This assumes that GNU utilities are *not* used -# The difference between tru64-shared and tru64-shared-rpath is the -# -rpath ${INSTALLTOP}/lib passed to the linker. -do_tru64-shared-rpath: - if ${DETECT_GNU_LD}; then \ - $(MAKE) do_gnu-shared; \ - else \ - libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \ - if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \ - libs="$(LIBKRB5) $$libs"; \ - fi; \ - ( set -x; ${CC} ${SHARED_LDFLAGS} \ - -shared -msym -o lib$$i.so \ - -rpath ${INSTALLTOP}/lib \ - -set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \ - -all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \ - libs="-l$$i $$libs"; \ - done; \ - fi - - -# This assumes that GNU utilities are *not* used -do_solaris-shared: - if ${DETECT_GNU_LD}; then \ - $(MAKE) do_gnu-shared; \ - else \ - libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \ - if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \ - libs="$(LIBKRB5) $$libs"; \ - fi; \ - ( PATH=/usr/ccs/bin:$$PATH ; export PATH; \ - MINUSZ='-z '; \ - (${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \ - set -x; ${CC} ${SHARED_LDFLAGS} -G -dy -z text \ - -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \ - -h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \ - -Wl,-Bsymbolic \ - $${MINUSZ}allextract lib$$i.a $${MINUSZ}defaultextract \ - $$libs ${EX_LIBS} -lc ) || exit 1; \ - libs="-l$$i $$libs"; \ - done; \ - fi - -# OpenServer 5 native compilers used -do_svr3-shared: - if ${DETECT_GNU_LD}; then \ - $(MAKE) do_gnu-shared; \ - else \ - libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \ - if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \ - libs="$(LIBKRB5) $$libs"; \ - fi; \ - ( PATH=/usr/ccs/bin:$$PATH ; export PATH; \ - find . -name "*.o" -print > allobjs ; \ - OBJS= ; export OBJS ; \ - for obj in `ar t lib$$i.a` ; do \ - OBJS="$${OBJS} `grep /$$obj allobjs`" ; \ - done ; \ - set -x; ${CC} ${SHARED_LDFLAGS} \ - -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \ - -h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \ - $${OBJS} $$libs ${EX_LIBS} ) || exit 1; \ - libs="-l$$i $$libs"; \ - done; \ - fi +build-shared: do_$(SHLIB_TARGET) link-shared -# UnixWare 7 and OpenUNIX 8 native compilers used -do_svr5-shared: - if ${DETECT_GNU_LD}; then \ - $(MAKE) do_gnu-shared; \ - else \ - libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \ +do_$(SHLIB_TARGET): + @ set -e; libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \ if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \ libs="$(LIBKRB5) $$libs"; \ fi; \ - ( PATH=/usr/ccs/bin:$$PATH ; export PATH; \ - SHARE_FLAG='-G'; \ - (${CC} -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \ - find . -name "*.o" -print > allobjs ; \ - OBJS= ; export OBJS ; \ - for obj in `ar t lib$$i.a` ; do \ - OBJS="$${OBJS} `grep /$$obj allobjs`" ; \ - done ; \ - set -x; LD_LIBRARY_PATH=.:$$LD_LIBRARY_PATH \ - ${CC} ${SHARED_LDFLAGS} \ - $${SHARE_FLAG} -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \ - -h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \ - $${OBJS} $$libs ${EX_LIBS} ) || exit 1; \ + $(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \ + LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \ + LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \ + LIBDEPS="$$libs $(EX_LIBS)" \ + link_a.$(SHLIB_TARGET); \ libs="-l$$i $$libs"; \ - done; \ - fi - -# This assumes that GNU utilities are *not* used -do_irix-shared: - if ${DETECT_GNU_LD}; then \ - $(MAKE) do_gnu-shared; \ - else \ - libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \ - if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \ - libs="$(LIBKRB5) $$libs"; \ - fi; \ - ( WHOLELIB="-all lib$$i.a -notall"; \ - (${CC} -v 2>&1 | grep gcc) > /dev/null && WHOLELIB="-Wl,-all,lib$$i.a,-notall"; \ - set -x; ${CC} ${SHARED_LDFLAGS} \ - -shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \ - -Wl,-soname,lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \ - $${WHOLELIB} $$libs ${EX_LIBS} -lc) || exit 1; \ - libs="-l$$i $$libs"; \ - done; \ - fi - -# This assumes that GNU utilities are *not* used -# HP-UX includes the full pathname of libs we depend on, so we would get -# ./libcrypto (with ./ as path information) compiled into libssl, hence -# we omit the SHLIBDEPS. Applications must be linked with -lssl -lcrypto -# anyway. -# The object modules are loaded from lib$i.a using the undocumented -Fl -# option. -# -# WARNING: Until DSO is fixed to support a search path, we support SHLIB_PATH -# by temporarily specifying "+s"! -# -do_hpux-shared: - for i in ${SHLIBDIRS}; do \ - if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \ - libs="$(LIBKRB5) $$libs"; \ - fi; \ - ( set -x; /usr/ccs/bin/ld ${SHARED_LDFLAGS} \ - +vnocompatwarnings \ - -b -z +s \ - -o lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \ - +h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \ - -Fl lib$$i.a -ldld -lc ) || exit 1; \ - chmod a=rx lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR}; \ - done - -# This assumes that GNU utilities are *not* used -# HP-UX includes the full pathname of libs we depend on, so we would get -# ./libcrypto (with ./ as path information) compiled into libssl, hence -# we omit the SHLIBDEPS. Applications must be linked with -lssl -lcrypto -# anyway. -# -# HP-UX in 64bit mode has "+s" enabled by default; it will search for -# shared libraries along LD_LIBRARY_PATH _and_ SHLIB_PATH. -# -do_hpux64-shared: - for i in ${SHLIBDIRS}; do \ - if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \ - libs="$(LIBKRB5) $$libs"; \ - fi; \ - ( set -x; /usr/ccs/bin/ld ${SHARED_LDFLAGS} \ - -b -z \ - -o lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \ - +h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \ - +forceload lib$$i.a -ldl -lc ) || exit 1; \ - chmod a=rx lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR}; \ done -# The following method is said to work on all platforms. Tests will -# determine if that's how it's gong to be used. -# This assumes that for all but GNU systems, GNU utilities are *not* used. -# ALLSYMSFLAGS would be: -# GNU systems: --whole-archive -# Tru64 Unix: -all -# Solaris: -z allextract -# Irix: -all -# HP/UX-32bit: -Fl -# HP/UX-64bit: +forceload -# AIX: -bnogc -# SHAREDFLAGS would be: -# GNU systems: -shared -Wl,-soname=lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} -# Tru64 Unix: -shared \ -# -set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" -# Solaris: -G -h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} -# Irix: -shared -Wl,-soname,lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} -# HP/UX-32bit: +vnocompatwarnings -b -z +s \ -# +h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} -# HP/UX-64bit: -b -z +h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} -# AIX: -G -bE:lib$$i.exp -bM:SRE -# SHAREDCMD would be: -# GNU systems: $(CC) -# Tru64 Unix: $(CC) -# Solaris: $(CC) -# Irix: $(CC) -# HP/UX-32bit: /usr/ccs/bin/ld -# HP/UX-64bit: /usr/ccs/bin/ld -# AIX: $(CC) -ALLSYMSFLAG=-bnogc -SHAREDFLAGS=${SHARED_LDFLAGS} -G -bE:lib$$i.exp -bM:SRE -SHAREDCMD=$(CC) -do_aix-shared: - libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \ - if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \ - libs="$(LIBKRB5) $$libs"; \ - fi; \ - ( set -x; \ - ld -r -o lib$$i.o $(ALLSYMSFLAG) lib$$i.a && \ - ( nm -Pg lib$$i.o | grep ' [BD] ' | cut -f1 -d' ' > lib$$i.exp; \ - $(SHAREDCMD) $(SHAREDFLAGS) \ - -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} lib$$i.o \ - $$libs ${EX_LIBS} ) ) \ - || exit 1; \ - libs="-l$$i $$libs"; \ - done +libcrypto.pc: Makefile + @ ( echo 'prefix=$(INSTALLTOP)'; \ + echo 'exec_prefix=$${prefix}'; \ + echo 'libdir=$${exec_prefix}/lib'; \ + echo 'includedir=$${prefix}/include'; \ + echo ''; \ + echo 'Name: OpenSSL-libcrypto'; \ + echo 'Description: OpenSSL cryptography library'; \ + echo 'Version: '$(VERSION); \ + echo 'Requires: '; \ + echo 'Libs: -L$${libdir} -lcrypto $(EX_LIBS)'; \ + echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc -do_reliantunix-shared: - libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \ - if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \ - libs="$(LIBKRB5) $$libs"; \ - fi; \ - tmpdir=/tmp/openssl.$$$$ ; rm -rf $$tmpdir ; \ - ( set -x; \ - ( Opwd=`pwd` ; mkdir $$tmpdir || exit 1; \ - cd $$tmpdir || exit 1 ; ar x $$Opwd/lib$$i.a ; \ - ${CC} -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} *.o \ - ) || exit 1; \ - cp $$tmpdir/lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} . ; \ - ) || exit 1; \ - rm -rf $$tmpdir ; \ - libs="-l$$i $$libs"; \ - done +libssl.pc: Makefile + @ ( echo 'prefix=$(INSTALLTOP)'; \ + echo 'exec_prefix=$${prefix}'; \ + echo 'libdir=$${exec_prefix}/lib'; \ + echo 'includedir=$${prefix}/include'; \ + echo ''; \ + echo 'Name: OpenSSL'; \ + echo 'Description: Secure Sockets Layer and cryptography libraries'; \ + echo 'Version: '$(VERSION); \ + echo 'Requires: '; \ + echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \ + echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc openssl.pc: Makefile @ ( echo 'prefix=$(INSTALLTOP)'; \ @@ -610,31 +334,25 @@ openssl.pc: Makefile echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \ echo 'Version: '$(VERSION); \ echo 'Requires: '; \ - echo 'Libs: -L$${libdir} -lssl -lcrypto $(LIBKRB5) $(EX_LIBS)'; \ + echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \ echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc -Makefile: Makefile.org - @echo "Makefile is older than Makefile.org." +Makefile: Makefile.org Configure config + @echo "Makefile is older than Makefile.org, Configure or config." @echo "Reconfigure the source tree (via './config' or 'perl Configure'), please." @false libclean: - rm -f *.map *.so *.so.* engines/*.so *.a */lib */*/lib + rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib clean: libclean rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c - @for i in $(DIRS) ;\ - do \ - if [ -d "$$i" ]; then \ - (cd $$i && echo "making clean in $$i..." && \ - $(MAKE) SDIRS='${SDIRS}' clean ) || exit 1; \ - rm -f $(LIBS); \ - fi; \ - done; - rm -f openssl.pc + @set -e; target=clean; $(RECURSIVE_BUILD_CMD) + rm -f $(LIBS) + rm -f openssl.pc libssl.pc libcrypto.pc rm -f speed.* .pure rm -f $(TARFILE) - @for i in $(ONEDIRS) ;\ + @set -e; for i in $(ONEDIRS) ;\ do \ rm -fr $$i/*; \ done @@ -645,84 +363,44 @@ makefile.one: files files: $(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO - @for i in $(DIRS) ;\ - do \ - if [ -d "$$i" ]; then \ - (cd $$i && echo "making 'files' in $$i..." && \ - $(MAKE) SDIRS='${SDIRS}' PERL='${PERL}' files ) || exit 1; \ - fi; \ - done; + @set -e; target=files; $(RECURSIVE_BUILD_CMD) links: @$(PERL) $(TOP)/util/mkdir-p.pl include/openssl @$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER) - @for i in $(DIRS); do \ - if [ -d "$$i" ]; then \ - (cd $$i && echo "making links in $$i..." && \ - $(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' FIPS_DES_ENC='${FIPS_DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' FIPS_SHA1_ASM_OBJ='${FIPS_SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PERL='${PERL}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' links ) || exit 1; \ - fi; \ - done; + @set -e; target=links; $(RECURSIVE_BUILD_CMD) gentests: @(cd test && echo "generating dummy tests (if needed)..." && \ - $(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' FIPS_DES_ENC='${FIPS_DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' FIPS_SHA1_ASM_OBJ='${FIPS_SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate ); + $(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate ); dclean: rm -f *.bak - @for i in $(DIRS) ;\ - do \ - if [ -d "$$i" ]; then \ - (cd $$i && echo "making dclean in $$i..." && \ - $(MAKE) SDIRS='${SDIRS}' PERL='${PERL}' dclean ) || exit 1; \ - fi; \ - done; + @set -e; target=dclean; $(RECURSIVE_BUILD_CMD) rehash: rehash.time rehash.time: certs - @(OPENSSL="`pwd`/apps/openssl$(EXE_EXT)"; OPENSSL_DEBUG_MEMORY=on; \ - export OPENSSL OPENSSL_DEBUG_MEMORY; \ - LD_LIBRARY_PATH="`pwd`:$$LD_LIBRARY_PATH"; \ - DYLD_LIBRARY_PATH="`pwd`:$$DYLD_LIBRARY_PATH"; \ - SHLIB_PATH="`pwd`:$$SHLIB_PATH"; \ - LIBPATH="`pwd`:$$LIBPATH"; \ - if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \ - export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \ - $(PERL) tools/c_rehash certs) + @(OPENSSL="`pwd`/util/opensslwrap.sh"; \ + OPENSSL_DEBUG_MEMORY=on; \ + export OPENSSL OPENSSL_DEBUG_MEMORY; \ + $(PERL) tools/c_rehash certs) touch rehash.time test: tests tests: rehash @(cd test && echo "testing..." && \ - $(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' FIPS_DES_ENC='${FIPS_DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' FIPS_SHA1_ASM_OBJ='${FIPS_SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests ); - @LD_LIBRARY_PATH="`pwd`:$$LD_LIBRARY_PATH"; \ - DYLD_LIBRARY_PATH="`pwd`:$$DYLD_LIBRARY_PATH"; \ - SHLIB_PATH="`pwd`:$$SHLIB_PATH"; \ - LIBPATH="`pwd`:$$LIBPATH"; \ - if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \ - export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \ - apps/openssl version -a + $(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests ); + util/opensslwrap.sh version -a report: @$(PERL) util/selftest.pl depend: - @for i in $(DIRS) ;\ - do \ - if [ -d "$$i" ]; then \ - (cd $$i && echo "making dependencies $$i..." && \ - $(MAKE) SDIRS='${SDIRS}' CFLAG='${CFLAG}' DEPFLAG='${DEPFLAG}' MAKEDEPPROG='${MAKEDEPPROG}' KRB5_INCLUDES='${KRB5_INCLUDES}' PERL='${PERL}' depend ) || exit 1; \ - fi; \ - done; + @set -e; target=depend; $(RECURSIVE_BUILD_CMD) lint: - @for i in $(DIRS) ;\ - do \ - if [ -d "$$i" ]; then \ - (cd $$i && echo "making lint $$i..." && \ - $(MAKE) SDIRS='${SDIRS}' lint ) || exit 1; \ - fi; \ - done; + @set -e; target=lint; $(RECURSIVE_BUILD_CMD) tags: rm -f TAGS @@ -730,7 +408,8 @@ tags: errors: $(PERL) util/mkerr.pl -recurse -write - (cd crypto/engine; $(MAKE) PERL=$(PERL) errors) + (cd engines; $(MAKE) PERL=$(PERL) errors) + $(PERL) util/ck_errf.pl */*.c */*/*.c stacks: $(PERL) util/mkstack.pl -write @@ -749,11 +428,15 @@ crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt c apps/openssl-vms.cnf: apps/openssl.cnf $(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf +crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl + $(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h + + TABLE: Configure (echo 'Output of `Configure TABLE'"':"; \ $(PERL) Configure TABLE) > TABLE -update: depend errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h apps/openssl-vms.cnf TABLE +update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend # Build distribution tar-file. As the list of files returned by "find" is # pretty long, on several platforms a "too many arguments" error or similar @@ -788,45 +471,36 @@ dist: @$(MAKE) TAR='${TAR}' TARFLAGS='${TARFLAGS}' tar dist_pem_h: - (cd crypto/pem; $(MAKE) CC='${CC}' SDIRS='${SDIRS}' CFLAG='${CFLAG}' pem.h; $(MAKE) clean) + (cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean) install: all install_docs install_sw install_sw: @$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \ $(INSTALL_PREFIX)$(INSTALLTOP)/lib \ + $(INSTALL_PREFIX)$(INSTALLTOP)/lib/engines \ $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig \ $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \ $(INSTALL_PREFIX)$(OPENSSLDIR)/misc \ $(INSTALL_PREFIX)$(OPENSSLDIR)/certs \ $(INSTALL_PREFIX)$(OPENSSLDIR)/private - @for i in $(EXHEADER) ;\ + @set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\ do \ (cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \ chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \ done; - @for i in $(DIRS) ;\ - do \ - if [ -d "$$i" ]; then \ - (cd $$i; echo "installing $$i..."; \ - $(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALL_PREFIX='${INSTALL_PREFIX}' INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' RANLIB='${RANLIB}' EXE_EXT='${EXE_EXT}' install ); \ - fi; \ - done - @for i in $(LIBS) ;\ + @set -e; target=install; $(RECURSIVE_BUILD_CMD) + @set -e; for i in $(LIBS) ;\ do \ if [ -f "$$i" ]; then \ ( echo installing $$i; \ cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \ - if egrep 'define OPENSSL_FIPS' $(TOP)/include/openssl/opensslconf.h > /dev/null; then \ - : ; \ - else \ - $(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \ - fi; \ + $(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \ chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \ mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \ fi; \ done; - @if [ -n "$(SHARED_LIBS)" ]; then \ + @set -e; if [ -n "$(SHARED_LIBS)" ]; then \ tmp="$(SHARED_LIBS)"; \ for i in $${tmp:-x}; \ do \ @@ -837,20 +511,19 @@ install_sw: chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \ mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \ else \ - c=`echo $$i | sed 's/^lib\(.*\)\.dll/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \ + c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \ cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \ chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \ mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \ - cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \ - chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \ - mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \ + cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \ + chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \ + mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \ fi ); \ fi; \ done; \ ( here="`pwd`"; \ cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \ - set $(MAKE); \ - $$1 -f $$here/Makefile link-shared ); \ + $(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \ if [ "$(INSTALLTOP)" != "/usr" ]; then \ echo 'OpenSSL shared libraries have been installed in:'; \ echo ' $(INSTALLTOP)'; \ @@ -858,15 +531,10 @@ install_sw: sed -e '1,/^$$/d' doc/openssl-shared.txt; \ fi; \ fi - @for i in $(SIGS) ;\ - do \ - if [ -f "$$i" ]; then \ - ( echo installing $$i; \ - cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \ - chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \ - mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \ - fi; \ - done; + cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig + chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libcrypto.pc + cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig + chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libssl.pc cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/openssl.pc @@ -879,12 +547,12 @@ install_docs: @pod2man="`cd util; ./pod2mantest $(PERL)`"; \ here="`pwd`"; \ filecase=; \ - if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" ]; then \ + if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \ filecase=-i; \ fi; \ - for i in doc/apps/*.pod; do \ + set -e; for i in doc/apps/*.pod; do \ fn=`basename $$i .pod`; \ - if [ "$$fn" = "config" ]; then sec=5; else sec=1; fi; \ + sec=`$(PERL) util/extract-section.pl 1 < $$i`; \ echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \ (cd `$(PERL) util/dirname.pl $$i`; \ sh -c "$$pod2man \ @@ -892,16 +560,16 @@ install_docs: --release=$(VERSION) `basename $$i`") \ > $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \ $(PERL) util/extract-names.pl < $$i | \ - grep -v $$filecase "^$$fn\$$" | \ - grep -v "[ ]" | \ + (grep -v $$filecase "^$$fn\$$"; true) | \ + (grep -v "[ ]"; true) | \ (cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \ while read n; do \ $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \ done); \ done; \ - for i in doc/crypto/*.pod doc/ssl/*.pod; do \ + set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \ fn=`basename $$i .pod`; \ - if [ "$$fn" = "des_modes" ]; then sec=7; else sec=3; fi; \ + sec=`$(PERL) util/extract-section.pl 3 < $$i`; \ echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \ (cd `$(PERL) util/dirname.pl $$i`; \ sh -c "$$pod2man \ @@ -909,8 +577,8 @@ install_docs: --release=$(VERSION) `basename $$i`") \ > $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \ $(PERL) util/extract-names.pl < $$i | \ - grep -v $$filecase "^$$fn\$$" | \ - grep -v "[ ]" | \ + (grep -v $$filecase "^$$fn\$$"; true) | \ + (grep -v "[ ]"; true) | \ (cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \ while read n; do \ $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \ |