diff options
Diffstat (limited to 'crypto/openssh/sshd.0')
-rw-r--r-- | crypto/openssh/sshd.0 | 640 |
1 files changed, 0 insertions, 640 deletions
diff --git a/crypto/openssh/sshd.0 b/crypto/openssh/sshd.0 deleted file mode 100644 index e771c95..0000000 --- a/crypto/openssh/sshd.0 +++ /dev/null @@ -1,640 +0,0 @@ -SSHD(8) System Manager's Manual SSHD(8) - -NAME - sshd M-bM-^@M-^S OpenSSH SSH daemon - -SYNOPSIS - sshd [-46DdeiqTt] [-b bits] [-C connection_spec] - [-c host_certificate_file] [-E log_file] [-f config_file] - [-g login_grace_time] [-h host_key_file] [-k key_gen_time] - [-o option] [-p port] [-u len] - -DESCRIPTION - sshd (OpenSSH Daemon) is the daemon program for ssh(1). Together these - programs replace rlogin and rsh, and provide secure encrypted - communications between two untrusted hosts over an insecure network. - - sshd listens for connections from clients. It is normally started at - boot from /etc/rc. It forks a new daemon for each incoming connection. - The forked daemons handle key exchange, encryption, authentication, - command execution, and data exchange. - - sshd can be configured using command-line options or a configuration file - (by default sshd_config(5)); command-line options override values - specified in the configuration file. sshd rereads its configuration file - when it receives a hangup signal, SIGHUP, by executing itself with the - name and options it was started with, e.g. /usr/sbin/sshd. - - The options are as follows: - - -4 Forces sshd to use IPv4 addresses only. - - -6 Forces sshd to use IPv6 addresses only. - - -b bits - Specifies the number of bits in the ephemeral protocol version 1 - server key (default 1024). - - -C connection_spec - Specify the connection parameters to use for the -T extended test - mode. If provided, any Match directives in the configuration - file that would apply to the specified user, host, and address - will be set before the configuration is written to standard - output. The connection parameters are supplied as keyword=value - pairs. The keywords are M-bM-^@M-^\userM-bM-^@M-^], M-bM-^@M-^\hostM-bM-^@M-^], M-bM-^@M-^\laddrM-bM-^@M-^], M-bM-^@M-^\lportM-bM-^@M-^], and - M-bM-^@M-^\addrM-bM-^@M-^]. All are required and may be supplied in any order, - either with multiple -C options or as a comma-separated list. - - -c host_certificate_file - Specifies a path to a certificate file to identify sshd during - key exchange. The certificate file must match a host key file - specified using the -h option or the HostKey configuration - directive. - - -D When this option is specified, sshd will not detach and does not - become a daemon. This allows easy monitoring of sshd. - - -d Debug mode. The server sends verbose debug output to standard - error, and does not put itself in the background. The server - also will not fork and will only process one connection. This - option is only intended for debugging for the server. Multiple - -d options increase the debugging level. Maximum is 3. - - -E log_file - Append debug logs to log_file instead of the system log. - - -e Write debug logs to standard error instead of the system log. - - -f config_file - Specifies the name of the configuration file. The default is - /etc/ssh/sshd_config. sshd refuses to start if there is no - configuration file. - - -g login_grace_time - Gives the grace time for clients to authenticate themselves - (default 120 seconds). If the client fails to authenticate the - user within this many seconds, the server disconnects and exits. - A value of zero indicates no limit. - - -h host_key_file - Specifies a file from which a host key is read. This option must - be given if sshd is not run as root (as the normal host key files - are normally not readable by anyone but root). The default is - /etc/ssh/ssh_host_key for protocol version 1, and - /etc/ssh/ssh_host_dsa_key, /etc/ssh/ssh_host_ecdsa_key. - /etc/ssh/ssh_host_ed25519_key and /etc/ssh/ssh_host_rsa_key for - protocol version 2. It is possible to have multiple host key - files for the different protocol versions and host key - algorithms. - - -i Specifies that sshd is being run from inetd(8). If SSH protocol - 1 is enabled, sshd should not normally be run from inetd because - it needs to generate the server key before it can respond to the - client, and this may take some time. Clients may have to wait - too long if the key was regenerated every time. - - -k key_gen_time - Specifies how often the ephemeral protocol version 1 server key - is regenerated (default 3600 seconds, or one hour). The - motivation for regenerating the key fairly often is that the key - is not stored anywhere, and after about an hour it becomes - impossible to recover the key for decrypting intercepted - communications even if the machine is cracked into or physically - seized. A value of zero indicates that the key will never be - regenerated. - - -o option - Can be used to give options in the format used in the - configuration file. This is useful for specifying options for - which there is no separate command-line flag. For full details - of the options, and their values, see sshd_config(5). - - -p port - Specifies the port on which the server listens for connections - (default 22). Multiple port options are permitted. Ports - specified in the configuration file with the Port option are - ignored when a command-line port is specified. Ports specified - using the ListenAddress option override command-line ports. - - -q Quiet mode. Nothing is sent to the system log. Normally the - beginning, authentication, and termination of each connection is - logged. - - -T Extended test mode. Check the validity of the configuration - file, output the effective configuration to stdout and then exit. - Optionally, Match rules may be applied by specifying the - connection parameters using one or more -C options. - - -t Test mode. Only check the validity of the configuration file and - sanity of the keys. This is useful for updating sshd reliably as - configuration options may change. - - -u len This option is used to specify the size of the field in the utmp - structure that holds the remote host name. If the resolved host - name is longer than len, the dotted decimal value will be used - instead. This allows hosts with very long host names that - overflow this field to still be uniquely identified. Specifying - -u0 indicates that only dotted decimal addresses should be put - into the utmp file. -u0 may also be used to prevent sshd from - making DNS requests unless the authentication mechanism or - configuration requires it. Authentication mechanisms that may - require DNS include RhostsRSAAuthentication, - HostbasedAuthentication, and using a from="pattern-list" option - in a key file. Configuration options that require DNS include - using a USER@HOST pattern in AllowUsers or DenyUsers. - -AUTHENTICATION - The OpenSSH SSH daemon supports SSH protocols 1 and 2. The default is to - use protocol 2 only, though this can be changed via the Protocol option - in sshd_config(5). Protocol 2 supports DSA, ECDSA, Ed25519 and RSA keys; - protocol 1 only supports RSA keys. For both protocols, each host has a - host-specific key, normally 2048 bits, used to identify the host. - - Forward security for protocol 1 is provided through an additional server - key, normally 1024 bits, generated when the server starts. This key is - normally regenerated every hour if it has been used, and is never stored - on disk. Whenever a client connects, the daemon responds with its public - host and server keys. The client compares the RSA host key against its - own database to verify that it has not changed. The client then - generates a 256-bit random number. It encrypts this random number using - both the host key and the server key, and sends the encrypted number to - the server. Both sides then use this random number as a session key - which is used to encrypt all further communications in the session. The - rest of the session is encrypted using a conventional cipher, currently - Blowfish or 3DES, with 3DES being used by default. The client selects - the encryption algorithm to use from those offered by the server. - - For protocol 2, forward security is provided through a Diffie-Hellman key - agreement. This key agreement results in a shared session key. The rest - of the session is encrypted using a symmetric cipher, currently 128-bit - AES, Blowfish, 3DES, CAST128, Arcfour, 192-bit AES, or 256-bit AES. The - client selects the encryption algorithm to use from those offered by the - server. Additionally, session integrity is provided through a - cryptographic message authentication code (hmac-md5, hmac-sha1, umac-64, - umac-128, hmac-ripemd160, hmac-sha2-256 or hmac-sha2-512). - - Finally, the server and the client enter an authentication dialog. The - client tries to authenticate itself using host-based authentication, - public key authentication, challenge-response authentication, or password - authentication. - - Regardless of the authentication type, the account is checked to ensure - that it is accessible. An account is not accessible if it is locked, - listed in DenyUsers or its group is listed in DenyGroups . The - definition of a locked account is system dependant. Some platforms have - their own account database (eg AIX) and some modify the passwd field ( - M-bM-^@M-^X*LK*M-bM-^@M-^Y on Solaris and UnixWare, M-bM-^@M-^X*M-bM-^@M-^Y on HP-UX, containing M-bM-^@M-^XNologinM-bM-^@M-^Y on - Tru64, a leading M-bM-^@M-^X*LOCKED*M-bM-^@M-^Y on FreeBSD and a leading M-bM-^@M-^X!M-bM-^@M-^Y on most - Linuxes). If there is a requirement to disable password authentication - for the account while allowing still public-key, then the passwd field - should be set to something other than these values (eg M-bM-^@M-^XNPM-bM-^@M-^Y or M-bM-^@M-^X*NP*M-bM-^@M-^Y ). - - If the client successfully authenticates itself, a dialog for preparing - the session is entered. At this time the client may request things like - allocating a pseudo-tty, forwarding X11 connections, forwarding TCP - connections, or forwarding the authentication agent connection over the - secure channel. - - After this, the client either requests a shell or execution of a command. - The sides then enter session mode. In this mode, either side may send - data at any time, and such data is forwarded to/from the shell or command - on the server side, and the user terminal in the client side. - - When the user program terminates and all forwarded X11 and other - connections have been closed, the server sends command exit status to the - client, and both sides exit. - -LOGIN PROCESS - When a user successfully logs in, sshd does the following: - - 1. If the login is on a tty, and no command has been specified, - prints last login time and /etc/motd (unless prevented in the - configuration file or by ~/.hushlogin; see the FILES section). - - 2. If the login is on a tty, records login time. - - 3. Checks /etc/nologin; if it exists, prints contents and quits - (unless root). - - 4. Changes to run with normal user privileges. - - 5. Sets up basic environment. - - 6. Reads the file ~/.ssh/environment, if it exists, and users are - allowed to change their environment. See the - PermitUserEnvironment option in sshd_config(5). - - 7. Changes to user's home directory. - - 8. If ~/.ssh/rc exists and the sshd_config(5) PermitUserRC option - is set, runs it; else if /etc/ssh/sshrc exists, runs it; - otherwise runs xauth. The M-bM-^@M-^\rcM-bM-^@M-^] files are given the X11 - authentication protocol and cookie in standard input. See - SSHRC, below. - - 9. Runs user's shell or command. All commands are run under the - user's login shell as specified in the system password - database. - -SSHRC - If the file ~/.ssh/rc exists, sh(1) runs it after reading the environment - files but before starting the user's shell or command. It must not - produce any output on stdout; stderr must be used instead. If X11 - forwarding is in use, it will receive the "proto cookie" pair in its - standard input (and DISPLAY in its environment). The script must call - xauth(1) because sshd will not run xauth automatically to add X11 - cookies. - - The primary purpose of this file is to run any initialization routines - which may be needed before the user's home directory becomes accessible; - AFS is a particular example of such an environment. - - This file will probably contain some initialization code followed by - something similar to: - - if read proto cookie && [ -n "$DISPLAY" ]; then - if [ `echo $DISPLAY | cut -c1-10` = 'localhost:' ]; then - # X11UseLocalhost=yes - echo add unix:`echo $DISPLAY | - cut -c11-` $proto $cookie - else - # X11UseLocalhost=no - echo add $DISPLAY $proto $cookie - fi | xauth -q - - fi - - If this file does not exist, /etc/ssh/sshrc is run, and if that does not - exist either, xauth is used to add the cookie. - -AUTHORIZED_KEYS FILE FORMAT - AuthorizedKeysFile specifies the files containing public keys for public - key authentication; if none is specified, the default is - ~/.ssh/authorized_keys and ~/.ssh/authorized_keys2. Each line of the - file contains one key (empty lines and lines starting with a M-bM-^@M-^X#M-bM-^@M-^Y are - ignored as comments). Protocol 1 public keys consist of the following - space-separated fields: options, bits, exponent, modulus, comment. - Protocol 2 public key consist of: options, keytype, base64-encoded key, - comment. The options field is optional; its presence is determined by - whether the line starts with a number or not (the options field never - starts with a number). The bits, exponent, modulus, and comment fields - give the RSA key for protocol version 1; the comment field is not used - for anything (but may be convenient for the user to identify the key). - For protocol version 2 the keytype is M-bM-^@M-^\ecdsa-sha2-nistp256M-bM-^@M-^], - M-bM-^@M-^\ecdsa-sha2-nistp384M-bM-^@M-^], M-bM-^@M-^\ecdsa-sha2-nistp521M-bM-^@M-^], M-bM-^@M-^\ssh-ed25519M-bM-^@M-^], M-bM-^@M-^\ssh-dssM-bM-^@M-^] or - M-bM-^@M-^\ssh-rsaM-bM-^@M-^]. - - Note that lines in this file are usually several hundred bytes long - (because of the size of the public key encoding) up to a limit of 8 - kilobytes, which permits DSA keys up to 8 kilobits and RSA keys up to 16 - kilobits. You don't want to type them in; instead, copy the - identity.pub, id_dsa.pub, id_ecdsa.pub, id_ed25519.pub, or the id_rsa.pub - file and edit it. - - sshd enforces a minimum RSA key modulus size for protocol 1 and protocol - 2 keys of 768 bits. - - The options (if present) consist of comma-separated option - specifications. No spaces are permitted, except within double quotes. - The following option specifications are supported (note that option - keywords are case-insensitive): - - cert-authority - Specifies that the listed key is a certification authority (CA) - that is trusted to validate signed certificates for user - authentication. - - Certificates may encode access restrictions similar to these key - options. If both certificate restrictions and key options are - present, the most restrictive union of the two is applied. - - command="command" - Specifies that the command is executed whenever this key is used - for authentication. The command supplied by the user (if any) is - ignored. The command is run on a pty if the client requests a - pty; otherwise it is run without a tty. If an 8-bit clean - channel is required, one must not request a pty or should specify - no-pty. A quote may be included in the command by quoting it - with a backslash. This option might be useful to restrict - certain public keys to perform just a specific operation. An - example might be a key that permits remote backups but nothing - else. Note that the client may specify TCP and/or X11 forwarding - unless they are explicitly prohibited. The command originally - supplied by the client is available in the SSH_ORIGINAL_COMMAND - environment variable. Note that this option applies to shell, - command or subsystem execution. Also note that this command may - be superseded by either a sshd_config(5) ForceCommand directive - or a command embedded in a certificate. - - environment="NAME=value" - Specifies that the string is to be added to the environment when - logging in using this key. Environment variables set this way - override other default environment values. Multiple options of - this type are permitted. Environment processing is disabled by - default and is controlled via the PermitUserEnvironment option. - This option is automatically disabled if UseLogin is enabled. - - from="pattern-list" - Specifies that in addition to public key authentication, either - the canonical name of the remote host or its IP address must be - present in the comma-separated list of patterns. See PATTERNS in - ssh_config(5) for more information on patterns. - - In addition to the wildcard matching that may be applied to - hostnames or addresses, a from stanza may match IP addresses - using CIDR address/masklen notation. - - The purpose of this option is to optionally increase security: - public key authentication by itself does not trust the network or - name servers or anything (but the key); however, if somebody - somehow steals the key, the key permits an intruder to log in - from anywhere in the world. This additional option makes using a - stolen key more difficult (name servers and/or routers would have - to be compromised in addition to just the key). - - no-agent-forwarding - Forbids authentication agent forwarding when this key is used for - authentication. - - no-port-forwarding - Forbids TCP forwarding when this key is used for authentication. - Any port forward requests by the client will return an error. - This might be used, e.g. in connection with the command option. - - no-pty Prevents tty allocation (a request to allocate a pty will fail). - - no-user-rc - Disables execution of ~/.ssh/rc. - - no-X11-forwarding - Forbids X11 forwarding when this key is used for authentication. - Any X11 forward requests by the client will return an error. - - permitopen="host:port" - Limit local port forwarding with ssh(1) -L such that it may only - connect to the specified host and port. IPv6 addresses can be - specified by enclosing the address in square brackets. Multiple - permitopen options may be applied separated by commas. No - pattern matching is performed on the specified hostnames, they - must be literal domains or addresses. A port specification of * - matches any port. - - principals="principals" - On a cert-authority line, specifies allowed principals for - certificate authentication as a comma-separated list. At least - one name from the list must appear in the certificate's list of - principals for the certificate to be accepted. This option is - ignored for keys that are not marked as trusted certificate - signers using the cert-authority option. - - tunnel="n" - Force a tun(4) device on the server. Without this option, the - next available device will be used if the client requests a - tunnel. - - An example authorized_keys file: - - # Comments allowed at start of line - ssh-rsa AAAAB3Nza...LiPk== user@example.net - from="*.sales.example.net,!pc.sales.example.net" ssh-rsa - AAAAB2...19Q== john@example.net - command="dump /home",no-pty,no-port-forwarding ssh-dss - AAAAC3...51R== example.net - permitopen="192.0.2.1:80",permitopen="192.0.2.2:25" ssh-dss - AAAAB5...21S== - tunnel="0",command="sh /etc/netstart tun0" ssh-rsa AAAA...== - jane@example.net - -SSH_KNOWN_HOSTS FILE FORMAT - The /etc/ssh/ssh_known_hosts and ~/.ssh/known_hosts files contain host - public keys for all known hosts. The global file should be prepared by - the administrator (optional), and the per-user file is maintained - automatically: whenever the user connects from an unknown host, its key - is added to the per-user file. - - Each line in these files contains the following fields: markers - (optional), hostnames, bits, exponent, modulus, comment. The fields are - separated by spaces. - - The marker is optional, but if it is present then it must be one of - M-bM-^@M-^\@cert-authorityM-bM-^@M-^], to indicate that the line contains a certification - authority (CA) key, or M-bM-^@M-^\@revokedM-bM-^@M-^], to indicate that the key contained on - the line is revoked and must not ever be accepted. Only one marker - should be used on a key line. - - Hostnames is a comma-separated list of patterns (M-bM-^@M-^X*M-bM-^@M-^Y and M-bM-^@M-^X?M-bM-^@M-^Y act as - wildcards); each pattern in turn is matched against the canonical host - name (when authenticating a client) or against the user-supplied name - (when authenticating a server). A pattern may also be preceded by M-bM-^@M-^X!M-bM-^@M-^Y to - indicate negation: if the host name matches a negated pattern, it is not - accepted (by that line) even if it matched another pattern on the line. - A hostname or address may optionally be enclosed within M-bM-^@M-^X[M-bM-^@M-^Y and M-bM-^@M-^X]M-bM-^@M-^Y - brackets then followed by M-bM-^@M-^X:M-bM-^@M-^Y and a non-standard port number. - - Alternately, hostnames may be stored in a hashed form which hides host - names and addresses should the file's contents be disclosed. Hashed - hostnames start with a M-bM-^@M-^X|M-bM-^@M-^Y character. Only one hashed hostname may - appear on a single line and none of the above negation or wildcard - operators may be applied. - - Bits, exponent, and modulus are taken directly from the RSA host key; - they can be obtained, for example, from /etc/ssh/ssh_host_key.pub. The - optional comment field continues to the end of the line, and is not used. - - Lines starting with M-bM-^@M-^X#M-bM-^@M-^Y and empty lines are ignored as comments. - - When performing host authentication, authentication is accepted if any - matching line has the proper key; either one that matches exactly or, if - the server has presented a certificate for authentication, the key of the - certification authority that signed the certificate. For a key to be - trusted as a certification authority, it must use the M-bM-^@M-^\@cert-authorityM-bM-^@M-^] - marker described above. - - The known hosts file also provides a facility to mark keys as revoked, - for example when it is known that the associated private key has been - stolen. Revoked keys are specified by including the M-bM-^@M-^\@revokedM-bM-^@M-^] marker at - the beginning of the key line, and are never accepted for authentication - or as certification authorities, but instead will produce a warning from - ssh(1) when they are encountered. - - It is permissible (but not recommended) to have several lines or - different host keys for the same names. This will inevitably happen when - short forms of host names from different domains are put in the file. It - is possible that the files contain conflicting information; - authentication is accepted if valid information can be found from either - file. - - Note that the lines in these files are typically hundreds of characters - long, and you definitely don't want to type in the host keys by hand. - Rather, generate them by a script, ssh-keyscan(1) or by taking - /etc/ssh/ssh_host_key.pub and adding the host names at the front. - ssh-keygen(1) also offers some basic automated editing for - ~/.ssh/known_hosts including removing hosts matching a host name and - converting all host names to their hashed representations. - - An example ssh_known_hosts file: - - # Comments allowed at start of line - closenet,...,192.0.2.53 1024 37 159...93 closenet.example.net - cvs.example.net,192.0.2.10 ssh-rsa AAAA1234.....= - # A hashed hostname - |1|JfKTdBh7rNbXkVAQCRp4OQoPfmI=|USECr3SWf1JUPsms5AqfD5QfxkM= ssh-rsa - AAAA1234.....= - # A revoked key - @revoked * ssh-rsa AAAAB5W... - # A CA key, accepted for any host in *.mydomain.com or *.mydomain.org - @cert-authority *.mydomain.org,*.mydomain.com ssh-rsa AAAAB5W... - -FILES - ~/.hushlogin - This file is used to suppress printing the last login time and - /etc/motd, if PrintLastLog and PrintMotd, respectively, are - enabled. It does not suppress printing of the banner specified - by Banner. - - ~/.rhosts - This file is used for host-based authentication (see ssh(1) for - more information). On some machines this file may need to be - world-readable if the user's home directory is on an NFS - partition, because sshd reads it as root. Additionally, this - file must be owned by the user, and must not have write - permissions for anyone else. The recommended permission for most - machines is read/write for the user, and not accessible by - others. - - ~/.shosts - This file is used in exactly the same way as .rhosts, but allows - host-based authentication without permitting login with - rlogin/rsh. - - ~/.ssh/ - This directory is the default location for all user-specific - configuration and authentication information. There is no - general requirement to keep the entire contents of this directory - secret, but the recommended permissions are read/write/execute - for the user, and not accessible by others. - - ~/.ssh/authorized_keys - Lists the public keys (DSA, ECDSA, Ed25519, RSA) that can be used - for logging in as this user. The format of this file is - described above. The content of the file is not highly - sensitive, but the recommended permissions are read/write for the - user, and not accessible by others. - - If this file, the ~/.ssh directory, or the user's home directory - are writable by other users, then the file could be modified or - replaced by unauthorized users. In this case, sshd will not - allow it to be used unless the StrictModes option has been set to - M-bM-^@M-^\noM-bM-^@M-^]. - - ~/.ssh/environment - This file is read into the environment at login (if it exists). - It can only contain empty lines, comment lines (that start with - M-bM-^@M-^X#M-bM-^@M-^Y), and assignment lines of the form name=value. The file - should be writable only by the user; it need not be readable by - anyone else. Environment processing is disabled by default and - is controlled via the PermitUserEnvironment option. - - ~/.ssh/known_hosts - Contains a list of host keys for all hosts the user has logged - into that are not already in the systemwide list of known host - keys. The format of this file is described above. This file - should be writable only by root/the owner and can, but need not - be, world-readable. - - ~/.ssh/rc - Contains initialization routines to be run before the user's home - directory becomes accessible. This file should be writable only - by the user, and need not be readable by anyone else. - - /etc/hosts.allow - /etc/hosts.deny - Access controls that should be enforced by tcp-wrappers are - defined here. Further details are described in hosts_access(5). - - /etc/hosts.equiv - This file is for host-based authentication (see ssh(1)). It - should only be writable by root. - - /etc/moduli - Contains Diffie-Hellman groups used for the "Diffie-Hellman Group - Exchange". The file format is described in moduli(5). - - /etc/motd - See motd(5). - - /etc/nologin - If this file exists, sshd refuses to let anyone except root log - in. The contents of the file are displayed to anyone trying to - log in, and non-root connections are refused. The file should be - world-readable. - - /etc/shosts.equiv - This file is used in exactly the same way as hosts.equiv, but - allows host-based authentication without permitting login with - rlogin/rsh. - - /etc/ssh/ssh_host_key - /etc/ssh/ssh_host_dsa_key - /etc/ssh/ssh_host_ecdsa_key - /etc/ssh/ssh_host_ed25519_key - /etc/ssh/ssh_host_rsa_key - These files contain the private parts of the host keys. These - files should only be owned by root, readable only by root, and - not accessible to others. Note that sshd does not start if these - files are group/world-accessible. - - /etc/ssh/ssh_host_key.pub - /etc/ssh/ssh_host_dsa_key.pub - /etc/ssh/ssh_host_ecdsa_key.pub - /etc/ssh/ssh_host_ed25519_key.pub - /etc/ssh/ssh_host_rsa_key.pub - These files contain the public parts of the host keys. These - files should be world-readable but writable only by root. Their - contents should match the respective private parts. These files - are not really used for anything; they are provided for the - convenience of the user so their contents can be copied to known - hosts files. These files are created using ssh-keygen(1). - - /etc/ssh/ssh_known_hosts - Systemwide list of known host keys. This file should be prepared - by the system administrator to contain the public host keys of - all machines in the organization. The format of this file is - described above. This file should be writable only by root/the - owner and should be world-readable. - - /etc/ssh/sshd_config - Contains configuration data for sshd. The file format and - configuration options are described in sshd_config(5). - - /etc/ssh/sshrc - Similar to ~/.ssh/rc, it can be used to specify machine-specific - login-time initializations globally. This file should be - writable only by root, and should be world-readable. - - /var/empty - chroot(2) directory used by sshd during privilege separation in - the pre-authentication phase. The directory should not contain - any files and must be owned by root and not group or world- - writable. - - /var/run/sshd.pid - Contains the process ID of the sshd listening for connections (if - there are several daemons running concurrently for different - ports, this contains the process ID of the one started last). - The content of this file is not sensitive; it can be world- - readable. - -SEE ALSO - scp(1), sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1), - ssh-keyscan(1), chroot(2), hosts_access(5), login.conf(5), moduli(5), - sshd_config(5), inetd(8), sftp-server(8) - -AUTHORS - OpenSSH is a derivative of the original and free ssh 1.2.12 release by - Tatu Ylonen. Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo - de Raadt and Dug Song removed many bugs, re-added newer features and - created OpenSSH. Markus Friedl contributed the support for SSH protocol - versions 1.5 and 2.0. Niels Provos and Markus Friedl contributed support - for privilege separation. - -OpenBSD 5.8 July 3, 2015 OpenBSD 5.8 |