diff options
Diffstat (limited to 'crypto/openssh/contrib/hpux')
| -rw-r--r-- | crypto/openssh/contrib/hpux/README | 45 | ||||
| -rw-r--r-- | crypto/openssh/contrib/hpux/egd | 15 | ||||
| -rwxr-xr-x | crypto/openssh/contrib/hpux/egd.rc | 98 | ||||
| -rw-r--r-- | crypto/openssh/contrib/hpux/sshd | 5 | ||||
| -rwxr-xr-x | crypto/openssh/contrib/hpux/sshd.rc | 90 |
5 files changed, 253 insertions, 0 deletions
diff --git a/crypto/openssh/contrib/hpux/README b/crypto/openssh/contrib/hpux/README new file mode 100644 index 0000000..f8bfa84 --- /dev/null +++ b/crypto/openssh/contrib/hpux/README @@ -0,0 +1,45 @@ +README for OpenSSH HP-UX contrib files +Kevin Steves <stevesk@pobox.com> + +sshd: configuration file for sshd.rc +sshd.rc: SSH startup script +egd: configuration file for egd.rc +egd.rc: EGD (entropy gathering daemon) startup script + +To install: + +sshd.rc: + +o Verify paths in sshd.rc match your local installation + (WHAT_PATH and WHAT_PID) +o Customize sshd if needed (SSHD_ARGS) +o Install: + + # cp sshd /etc/rc.config.d + # chmod 444 /etc/rc.config.d/sshd + # cp sshd.rc /sbin/init.d + # chmod 555 /sbin/init.d/sshd.rc + # ln -s /sbin/init.d/sshd.rc /sbin/rc1.d/K100sshd + # ln -s /sbin/init.d/sshd.rc /sbin/rc2.d/S900sshd + +egd.rc: + +o Verify egd.pl path in egd.rc matches your local installation + (WHAT_PATH) +o Customize egd if needed (EGD_ARGS and EGD_LOG) +o Add pseudo account: + + # groupadd egd + # useradd -g egd egd + # mkdir -p /etc/opt/egd + # chown egd:egd /etc/opt/egd + # chmod 711 /etc/opt/egd + +o Install: + + # cp egd /etc/rc.config.d + # chmod 444 /etc/rc.config.d/egd + # cp egd.rc /sbin/init.d + # chmod 555 /sbin/init.d/egd.rc + # ln -s /sbin/init.d/egd.rc /sbin/rc1.d/K600egd + # ln -s /sbin/init.d/egd.rc /sbin/rc2.d/S400egd diff --git a/crypto/openssh/contrib/hpux/egd b/crypto/openssh/contrib/hpux/egd new file mode 100644 index 0000000..21af0bd --- /dev/null +++ b/crypto/openssh/contrib/hpux/egd @@ -0,0 +1,15 @@ +# EGD_START: Set to 1 to start entropy gathering daemon +# EGD_ARGS: Command line arguments to pass to egd +# EGD_LOG: EGD stdout and stderr log file (default /etc/opt/egd/egd.log) +# +# To configure the egd environment: + +# groupadd egd +# useradd -g egd egd +# mkdir -p /etc/opt/egd +# chown egd:egd /etc/opt/egd +# chmod 711 /etc/opt/egd + +EGD_START=1 +EGD_ARGS='/etc/opt/egd/entropy' +EGD_LOG= diff --git a/crypto/openssh/contrib/hpux/egd.rc b/crypto/openssh/contrib/hpux/egd.rc new file mode 100755 index 0000000..919dea7 --- /dev/null +++ b/crypto/openssh/contrib/hpux/egd.rc @@ -0,0 +1,98 @@ +#!/sbin/sh + +# +# egd.rc: EGD start-up and shutdown script +# + +# Allowed exit values: +# 0 = success; causes "OK" to show up in checklist. +# 1 = failure; causes "FAIL" to show up in checklist. +# 2 = skip; causes "N/A" to show up in the checklist. +# Use this value if execution of this script is overridden +# by the use of a control variable, or if this script is not +# appropriate to execute for some other reason. +# 3 = reboot; causes the system to be rebooted after execution. + +# Input and output: +# stdin is redirected from /dev/null +# +# stdout and stderr are redirected to the /etc/rc.log file +# during checklist mode, or to the console in raw mode. + +umask 022 + +PATH=/usr/sbin:/usr/bin:/sbin +export PATH + +WHAT='EGD (entropy gathering daemon)' +WHAT_PATH=/opt/perl/bin/egd.pl +WHAT_CONFIG=/etc/rc.config.d/egd +WHAT_LOG=/etc/opt/egd/egd.log + +# NOTE: If your script executes in run state 0 or state 1, then /usr might +# not be available. Do not attempt to access commands or files in +# /usr unless your script executes in run state 2 or greater. Other +# file systems typically not mounted until run state 2 include /var +# and /opt. + +rval=0 + +# Check the exit value of a command run by this script. If non-zero, the +# exit code is echoed to the log file and the return value of this script +# is set to indicate failure. + +set_return() { + x=$? + if [ $x -ne 0 ]; then + echo "EXIT CODE: $x" + rval=1 # script FAILed + fi +} + +case $1 in +'start_msg') + echo "Starting $WHAT" + ;; + +'stop_msg') + echo "Stopping $WHAT" + ;; + +'start') + if [ -f $WHAT_CONFIG ] ; then + . $WHAT_CONFIG + else + echo "ERROR: $WHAT_CONFIG defaults file MISSING" + fi + + + if [ "$EGD_START" -eq 1 -a -x $WHAT_PATH ]; then + EGD_LOG=${EGD_LOG:-$WHAT_LOG} + su egd -c "nohup $WHAT_PATH $EGD_ARGS >$EGD_LOG 2>&1" && + echo $WHAT started + set_return + else + rval=2 + fi + ;; + +'stop') + pid=`ps -fuegd | awk '$1 == "egd" { print $2 }'` + if [ "X$pid" != "X" ]; then + if kill "$pid"; then + echo "$WHAT stopped" + else + rval=1 + echo "Unable to stop $WHAT" + fi + fi + set_return + ;; + +*) + echo "usage: $0 {start|stop|start_msg|stop_msg}" + rval=1 + ;; +esac + +exit $rval diff --git a/crypto/openssh/contrib/hpux/sshd b/crypto/openssh/contrib/hpux/sshd new file mode 100644 index 0000000..8eb5e92 --- /dev/null +++ b/crypto/openssh/contrib/hpux/sshd @@ -0,0 +1,5 @@ +# SSHD_START: Set to 1 to start SSH daemon +# SSHD_ARGS: Command line arguments to pass to sshd +# +SSHD_START=1 +SSHD_ARGS= diff --git a/crypto/openssh/contrib/hpux/sshd.rc b/crypto/openssh/contrib/hpux/sshd.rc new file mode 100755 index 0000000..f9a1099 --- /dev/null +++ b/crypto/openssh/contrib/hpux/sshd.rc @@ -0,0 +1,90 @@ +#!/sbin/sh + +# +# sshd.rc: SSH daemon start-up and shutdown script +# + +# Allowed exit values: +# 0 = success; causes "OK" to show up in checklist. +# 1 = failure; causes "FAIL" to show up in checklist. +# 2 = skip; causes "N/A" to show up in the checklist. +# Use this value if execution of this script is overridden +# by the use of a control variable, or if this script is not +# appropriate to execute for some other reason. +# 3 = reboot; causes the system to be rebooted after execution. + +# Input and output: +# stdin is redirected from /dev/null +# +# stdout and stderr are redirected to the /etc/rc.log file +# during checklist mode, or to the console in raw mode. + +PATH=/usr/sbin:/usr/bin:/sbin +export PATH + +WHAT='OpenSSH' +WHAT_PATH=/opt/openssh/sbin/sshd +WHAT_PID=/var/run/sshd.pid +WHAT_CONFIG=/etc/rc.config.d/sshd + +# NOTE: If your script executes in run state 0 or state 1, then /usr might +# not be available. Do not attempt to access commands or files in +# /usr unless your script executes in run state 2 or greater. Other +# file systems typically not mounted until run state 2 include /var +# and /opt. + +rval=0 + +# Check the exit value of a command run by this script. If non-zero, the +# exit code is echoed to the log file and the return value of this script +# is set to indicate failure. + +set_return() { + x=$? + if [ $x -ne 0 ]; then + echo "EXIT CODE: $x" + rval=1 # script FAILed + fi +} + +case $1 in +'start_msg') + echo "Starting $WHAT" + ;; + +'stop_msg') + echo "Stopping $WHAT" + ;; + +'start') + if [ -f $WHAT_CONFIG ] ; then + . $WHAT_CONFIG + else + echo "ERROR: $WHAT_CONFIG defaults file MISSING" + fi + + if [ "$SSHD_START" -eq 1 -a -x "$WHAT_PATH" ]; then + $WHAT_PATH $SSHD_ARGS && echo "$WHAT started" + set_return + else + rval=2 + fi + ;; + +'stop') + if kill `cat $WHAT_PID`; then + echo "$WHAT stopped" + else + rval=1 + echo "Unable to stop $WHAT" + fi + set_return + ;; + +*) + echo "usage: $0 {start|stop|start_msg|stop_msg}" + rval=1 + ;; +esac + +exit $rval |
