summaryrefslogtreecommitdiffstats
path: root/crypto/heimdal/appl/popper/pop3e.rfc1082
diff options
context:
space:
mode:
Diffstat (limited to 'crypto/heimdal/appl/popper/pop3e.rfc1082')
-rw-r--r--crypto/heimdal/appl/popper/pop3e.rfc1082619
1 files changed, 619 insertions, 0 deletions
diff --git a/crypto/heimdal/appl/popper/pop3e.rfc1082 b/crypto/heimdal/appl/popper/pop3e.rfc1082
new file mode 100644
index 0000000..ac49448
--- /dev/null
+++ b/crypto/heimdal/appl/popper/pop3e.rfc1082
@@ -0,0 +1,619 @@
+
+
+
+
+
+
+Network Working Group M. Rose
+Request for Comments: 1082 TWG
+ November 1988
+
+
+
+ Post Office Protocol - Version 3
+ Extended Service Offerings
+
+Status of This Memo
+
+ This memo suggests a simple method for workstations to dynamically
+ access mail from a discussion group server, as an extension to an
+ earlier memo which dealt with dynamically accessing mail from a
+ mailbox server using the Post Office Protocol - Version 3 (POP3).
+ This RFC specifies a proposed protocol for the Internet community,
+ and requests discussion and suggestions for improvements. All of the
+ extensions described in this memo to the POP3 are OPTIONAL.
+ Distribution of this memo is unlimited.
+
+Introduction and Motivation
+
+ It is assumed that the reader is familiar with RFC 1081 that
+ discusses the Post Office Protocol - Version 3 (POP3) [RFC1081].
+ This memo describes extensions to the POP3 which enhance the service
+ it offers to clients. This additional service permits a client host
+ to access discussion group mail, which is often kept in a separate
+ spool area, using the general POP3 facilities.
+
+ The next section describes the evolution of discussion groups and the
+ technologies currently used to implement them. To summarize:
+
+ o An exploder is used to map from a single address to
+ a list of addresses which subscribe to the list, and redirects
+ any subsequent error reports associated with the delivery of
+ each message. This has two primary advantages:
+ - Subscribers need know only a single address
+ - Responsible parties get the error reports and not
+ the subscribers
+
+
+
+
+
+
+
+
+
+
+
+
+Rose [Page 1]
+
+RFC 1082 POP3 Extended Service November 1988
+
+
+ o Typically, each subscription address is not a person's private
+ maildrop, but a system-wide maildrop, which can be accessed
+ by more than one user. This has several advantages:
+ - Only a single copy of each message need traverse the
+ net for a given site (which may contain several local
+ hosts). This conserves bandwidth and cycles.
+ - Only a single copy of each message need reside on each
+ subscribing host. This conserves disk space.
+ - The private maildrop for each user is not cluttered
+ with discussion group mail.
+
+ Despite this optimization of resources, further economy can be
+ achieved at sites with more than one host. Typically, sites with
+ more than one host either:
+
+ 1. Replicate discussion group mail on each host. This
+ results in literally gigabytes of disk space committed to
+ unnecessarily store redundant information.
+
+ 2. Keep discussion group mail on one host and give all users a
+ login on that host (in addition to any other logins they may
+ have). This is usually a gross inconvenience for users who
+ work on other hosts, or a burden to users who are forced to
+ work on that host.
+
+ As discussed in [RFC1081], the problem of giving workstations dynamic
+ access to mail from a mailbox server has been explored in great
+ detail (originally there was [RFC918], this prompted the author to
+ write [RFC1081], independently of this [RFC918] was upgraded to
+ [RFC937]). A natural solution to the problem outlined above is to
+ keep discussion group mail on a mailbox server at each site and
+ permit different hosts at that site to employ the POP3 to access
+ discussion group mail. If implemented properly, this avoids the
+ problems of both strategies outlined above.
+
+ ASIDE: It might be noted that a good distributed filesystem
+ could also solve this problem. Sadly, "good"
+ distributed filesystems, which do not suffer
+ unacceptable response time for interactive use, are
+ few and far between these days!
+
+ Given this motivation, now let's consider discussion groups, both in
+ general and from the point of view of a user agent. Following this,
+ extensions to the POP3 defined in [RFC1081] are presented. Finally,
+ some additional policy details are discussed along with some initial
+ experiences.
+
+
+
+
+
+Rose [Page 2]
+
+RFC 1082 POP3 Extended Service November 1988
+
+
+What's in a Discussion Group
+
+ Since mailers and user agents first crawled out of the primordial
+ ARPAnet, the value of discussion groups have been appreciated,
+ (though their implementation has not always been well-understood).
+
+ Described simply, a discussion group is composed of a number of
+ subscribers with a common interest. These subscribers post mail to a
+ single address, known as a distribution address. From this
+ distribution address, a copy of the message is sent to each
+ subscriber. Each group has a moderator, which is the person that
+ administrates the group. The moderator can usually be reached at a
+ special address, known as a request address. Usually, the
+ responsibilities of the moderator are quite simple, since the mail
+ system handles the distribution to subscribers automatically. In
+ some cases, the interest group, instead of being distributed directly
+ to its subscribers, is put into a digest format by the moderator and
+ then sent to the subscribers. Although this requires more work on
+ the part of the moderator, such groups tend to be better organized.
+
+ Unfortunately, there are a few problems with the scheme outlined
+ above. First, if two users on the same host subscribe to the same
+ interest group, two copies of the message get delivered. This is
+ wasteful of both processor and disk resources.
+
+ Second, some of these groups carry a lot of traffic. Although
+ subscription to an group does indicate interest on the part of a
+ subscriber, it is usually not interesting to get 50 messages or so
+ delivered to the user's private maildrop each day, interspersed with
+ personal mail, that is likely to be of a much more important and
+ timely nature.
+
+ Third, if a subscriber on the distribution list for a group becomes
+ "bad" somehow, the originator of the message and not the moderator of
+ the group is notified. It is not uncommon for a large list to have
+ 10 or so bogus addresses present. This results in the originator
+ being flooded with "error messages" from mailers across the Internet
+ stating that a given address on the list was bad. Needless to say,
+ the originator usually could not care less if the bogus addresses got
+ a copy of the message or not. The originator is merely interested in
+ posting a message to the group at large. Furthermore, the moderator
+ of the group does care if there are bogus addresses on the list, but
+ ironically does not receive notification.
+
+ There are various approaches which can be used to solve some or all
+ of these problems. Usually these involve placing an exploder agent
+ at the distribution source of the discussion group, which expands the
+ name of the group into the list of subscription addresses for the
+
+
+
+Rose [Page 3]
+
+RFC 1082 POP3 Extended Service November 1988
+
+
+ group. In the process, the exploder will also change the address
+ that receives error notifications to be the request address or other
+ responsible party.
+
+ A complementary approach, used in order to cut down on resource
+ utilization of all kinds, replaces all the subscribers at a single
+ host (or group of hosts under a single administration) with a single
+ address at that host. This address maps to a file on the host,
+ usually in a spool area, which all users can access. (Advanced
+ implementations can also implement private discussion groups this
+ way, in which a single copy of each message is kept, but is
+ accessible to only a select number of users on the host.)
+
+ The two approaches can be combined to avoid all of the problems
+ described above.
+
+ Finally, a third approach can be taken, which can be used to aid user
+ agents processing mail for the discussion group: In order to speed
+ querying of the maildrop which contains the local host's copy of the
+ discussion group, two other items are usually associated with the
+ discussion group, on a local basis. These are the maxima and the
+ last-date. Each time a message is received for the group on the
+ local host, the maxima is increased by at least one. Furthermore,
+ when a new maxima is generated, the current date is determined. This
+ is called the last date. As the message is entered into the local
+ maildrop, it is given the current maxima and last-date. This permits
+ the user agent to quickly determine if new messages are present in
+ the maildrop.
+
+ NOTE: The maxima may be characterized as a monotonically
+ increasing quanity. Although sucessive values of the
+ maxima need not be consecutive, any maxima assigned
+ is always greater than any previously assigned value.
+
+Definition of Terms
+
+ To formalize these notions somewhat, consider the following 7
+ parameters which describe a given discussion group from the
+ perspective of the user agent (the syntax given is from [RFC822]):
+
+
+
+
+
+
+
+
+
+
+
+
+Rose [Page 4]
+
+RFC 1082 POP3 Extended Service November 1988
+
+
+ NAME Meaning: the name of the discussion group
+ Syntax: TOKEN (ALPHA *[ ALPHA / DIGIT / "-" ])
+ (case-insensitive recognition)
+ Example: unix-wizards
+
+ ALIASES Meaning: alternates names for the group, which
+ are locally meaningful; these are
+ typically used to shorten user typein
+ Syntax: TOKEN (case-insensitive recognition)
+ Example: uwiz
+
+ ADDRESS Meaning: the primary source of the group
+ Syntax: 822 address
+ Example: Unix-Wizards@BRL.MIL
+
+ REQUEST Meaning: the primary moderator of the group
+ Syntax: 822 address
+ Example: Unix-Wizards-Request@BRL.MIL
+
+ FLAGS Meaning: locally meaningful flags associated
+ with the discussion group; this memo
+ leaves interpretation of this
+ parameter to each POP3 implementation
+ Syntax: octal number
+ Example: 01
+
+ MAXIMA Meaning: the magic cookie associated with the
+ last message locally received for the
+ group; it is the property of the magic
+ cookie that it's value NEVER
+ decreases, and increases by at least
+ one each time a message is locally
+ received
+ Syntax: decimal number
+ Example: 1004
+
+ LASTDATE Meaning: the date that the last message was
+ locally received
+ Syntax: 822 date
+ Example: Thu, 19 Dec 85 10:26:48 -0800
+
+ Note that the last two values are locally determined for the maildrop
+ associated with the discussion group and with each message in that
+ maildrop. Note however that the last message in the maildrop have a
+ different MAXIMA and LASTDATE than the discussion group. This often
+ occurs when the maildrop has been archived.
+
+
+
+
+
+Rose [Page 5]
+
+RFC 1082 POP3 Extended Service November 1988
+
+
+ Finally, some local systems provide mechanisms for automatically
+ archiving discussion group mail. In some cases, a two-level archive
+ scheme is used: current mail is kept in the standard maildrop,
+ recent mail is kept in an archive maildrop, and older mail is kept
+ off-line. With this scheme, in addition to having a "standard"
+ maildrop for each discussion group, an "archive" maildrop may also be
+ available. This permits a user agent to examine the most recent
+ archive using the same mechanisms as those used on the current mail.
+
+The XTND Command
+
+ The following commands are valid only in the TRANSACTION state of the
+ POP3. This implies that the POP3 server has already opened the
+ user's maildrop (which may be empty). This maildrop is called the
+ "default maildrop". The phrase "closes the current maildrop" has two
+ meanings, depending on whether the current maildrop is the default
+ maildrop or is a maildrop associated with a discussion group.
+
+ In the former context, when the current maildrop is closed any
+ messages marked as deleted are removed from the maildrop currently in
+ use. The exclusive-access lock on the maildrop is then released
+ along with any implementation-specific resources (e.g., file-
+ descriptors).
+
+ In the latter context, a maildrop associated with a discussion group
+ is considered to be read-only to the POP3 client. In this case, the
+ phrase "closes the current maildrop" merely means that any
+ implementation-specific resources are released. (Hence, the POP3
+ command DELE is a no-op.)
+
+ All the new facilities are introduced via a single POP3 command,
+ XTND. All positive reponses to the XTND command are multi-line.
+
+ The most common multi-line response to the commands contains a
+ "discussion group listing" which presents the name of the discussion
+ group along with it's maxima. In order to simplify parsing all POP3
+ servers are required to use a certain format for discussion group
+ listings:
+
+ NAME SP MAXIMA
+
+ This memo makes no requirement on what follows the maxima in the
+ listing. Minimal implementations should just end that line of the
+ response with a CRLF pair. More advanced implementations may include
+ other information, as parsed from the message.
+
+ NOTE: This memo STRONGLY discourages implementations from
+ supplying additional information in the listing.
+
+
+
+Rose [Page 6]
+
+RFC 1082 POP3 Extended Service November 1988
+
+
+ XTND BBOARDS [name]
+ Arguments: the name of a discussion group (optionally)
+ Restrictions: may only be given in the TRANSACTION state.
+ Discussion:
+
+ If an argument was given, the POP3 server closes the current
+ maildrop. The POP3 server then validates the argument as the name of
+ a discussion group. If this is successful, it opens the maildrop
+ associated with the group, and returns a multi-line response
+ containing the discussion group listing. If the discussion group
+ named is not valid, or the associated archive maildrop is not
+ readable by the user, then an error response is returned.
+
+ If no argument was given, the POP3 server issues a multi-line
+ response. After the initial +OK, for each discussion group known,
+ the POP3 server responds with a line containing the listing for that
+ discussion group. Note that only world-readable discussion groups
+ are included in the multi-line response.
+
+ In order to aid user agents, this memo requires an extension to the
+ scan listing when an "XTND BBOARDS" command has been given.
+ Normally, a scan listing, as generated by the LIST, takes the form:
+
+ MSGNO SIZE
+
+ where MSGNO is the number of the message being listed and SIZE is the
+ size of the message in octets. When reading a maildrop accessed via
+ "XTND BBOARDS", the scan listing takes the form
+
+ MSGNO SIZE MAXIMA
+
+ where MAXIMA is the maxima that was assigned to the message when it
+ was placed in the BBoard.
+
+ Possible Responses:
+ +OK XTND
+ -ERR no such bboard
+ Examples:
+ C: XTND BBOARDS
+ S: +OK XTND
+ S: system 10
+ S: mh-users 100
+ S: .
+ C: XTND BBOARDS system
+ S: + OK XTND
+ S: system 10
+ S: .
+
+
+
+
+Rose [Page 7]
+
+RFC 1082 POP3 Extended Service November 1988
+
+
+ XTND ARCHIVE name
+ Arguments: the name of a discussion group (required)
+ Restrictions: may only be given in the TRANSACTION state.
+ Discussion:
+
+ The POP3 server closes the current maildrop. The POP3 server then
+ validates the argument as the name of a discussion group. If this is
+ successful, it opens the archive maildrop associated with the group,
+ and returns a multi-line response containing the discussion group
+ listing. If the discussion group named is not valid, or the
+ associated archive maildrop is not readable by the user, then an
+ error response is returned.
+
+ In addition, the scan listing generated by the LIST command is
+ augmented (as described above).
+
+ Possible Responses:
+ +OK XTND
+ -ERR no such bboard Examples:
+ C: XTND ARCHIVE system
+ S: + OK XTND
+ S: system 3
+ S: .
+
+ XTND X-BBOARDS name
+ Arguments: the name of a discussion group (required)
+ Restrictions: may only be given in the TRANSACTION state.
+ Discussion:
+
+ The POP3 server validates the argument as the name of a
+ discussion group. If this is unsuccessful, then an error
+ response is returned. Otherwise a multi-line response is
+ returned. The first 14 lines of this response (after the
+ initial +OK) are defined in this memo. Minimal implementations
+ need not include other information (and may omit certain
+ information, outputing a bare CRLF pair). More advanced
+ implementations may include other information.
+
+ Line Information (refer to "Definition of Terms")
+ ---- -----------
+ 1 NAME
+ 2 ALIASES, separated by SP
+ 3 system-specific: maildrop
+ 4 system-specific: archive maildrop
+ 5 system-specific: information
+ 6 system-specific: maildrop map
+ 7 system-specific: encrypted password
+ 8 system-specific: local leaders, separated by SP
+
+
+
+Rose [Page 8]
+
+RFC 1082 POP3 Extended Service November 1988
+
+
+ 9 ADDRESS
+ 10 REQUEST
+ 11 system-specific: incoming feed
+ 12 system-specific: outgoing feeds
+ 13 FLAGS SP MAXIMA
+ 14 LASTDATE
+
+ Most of this information is entirely too specific to the UCI Version
+ of the Rand MH Message Handling System [MRose85]. Nevertheless,
+ lines 1, 2, 9, 10, 13, and 14 are of general interest, regardless of
+ the implementation.
+
+ Possible Responses:
+ +OK XTND
+ -ERR no such bboard
+ Examples:
+ C: XTND X-BBOARDS system
+ S: + OK XTND
+ S: system
+ S: local general
+ S: /usr/bboards/system.mbox
+ S: /usr/bboards/archive/system.mbox
+ S: /usr/bboards/.system.cnt
+ S: /usr/bboards/.system.map
+ S: *
+ S: mother
+ S: system@nrtc.northrop.com
+ S: system-request@nrtc.northrop.com
+ S:
+ S: dist-system@nrtc-gremlin.northrop.com
+ S: 01 10
+ S: Thu, 19 Dec 85 00:08:49 -0800
+ S: .
+
+Policy Notes
+
+ Depending on the particular entity administrating the POP3 service
+ host, two additional policies might be implemented:
+
+ 1. Private Discussion Groups
+
+ In the general case, discussion groups are world-readable, any user,
+ once logged in (via a terminal, terminal server, or POP3, etc.), is
+ able to read the maildrop for each discussion group known to the POP3
+ service host. Nevertheless, it is desirable, usually for privacy
+ reasons, to implement private discussion groups as well.
+
+ Support of this is consistent with the extensions outlined in this
+
+
+
+Rose [Page 9]
+
+RFC 1082 POP3 Extended Service November 1988
+
+
+ memo. Once the AUTHORIZATION state has successfully concluded, the
+ POP3 server grants the user access to exactly those discussion groups
+ the POP3 service host permits the authenticated user to access. As a
+ "security" feature, discussion groups associated with unreadable
+ maildrops should not be listed in a positive response to the XTND
+ BBOARDS command.
+
+ 2. Anonymous POP3 Users
+
+ In order to minimize the authentication problem, a policy permitting
+ "anonymous" access to the world-readable maildrops for discussion
+ groups on the POP3 server may be implemented.
+
+ Support of this is consistent with the extensions outlined in this
+ memo. The POP3 server can be modified to accept a USER command for a
+ well-known pseudonym (i.e., "anonymous") which is valid with any PASS
+ command. As a "security" feature, it is advisable to limit this kind
+ of access to only hosts at the local site, or to hosts named in an
+ access list.
+
+Experiences and Conclusions
+
+ All of the facilities described in this memo and in [RFC1081] have
+ been implemented in MH #6.1. Initial experiences have been, on the
+ whole, very positive.
+
+ After the first implementation, some performance tuning was required.
+ This consisted primarily of caching the datastructures which describe
+ discussion groups in the POP3 server. A second optimization
+ pertained to the client: the program most commonly used to read
+ BBoards in MH was modified to retrieve messages only when needed.
+ Two schemes are used:
+
+ o If only the headers (and the first few lines of the body) of
+ the message are required (e.g., for a scan listing), then only
+ these are retrieved. The resulting output is then cached, on
+ a per-message basis.
+
+ o If the entire message is required, then it is retrieved intact,
+ and cached locally.
+
+ With these optimizations, response time is quite adequate when the
+ POP3 server and client are connected via a high-speed local area
+ network. In fact, the author uses this mechanism to access certain
+ private discussion groups over the Internet. In this case, response
+ is still good. When a 9.6Kbps modem is inserted in the path,
+ response went from good to almost tolerable (fortunately the author
+ only reads a few discussion groups in this fashion).
+
+
+
+Rose [Page 10]
+
+RFC 1082 POP3 Extended Service November 1988
+
+
+ To conclude: the POP3 is a good thing, not only for personal mail but
+ for discussion group mail as well.
+
+
+References
+
+ [RFC1081] Rose, M., "Post Office Protocol - Verison 3 (POP3)", RFC
+ 1081, TWG, November 1988.
+
+ [MRose85] Rose, M., and J. Romine, "The Rand MH Message Handling
+ System: User's Manual", University of California, Irvine,
+ November 1985.
+
+ [RFC822] Crocker, D., "Standard for the Format of ARPA-Internet
+ Text Messages", RFC 822, University of Delaware, August
+ 1982.
+
+ [RFC918] Reynolds, J., "Post Office Protocol", RFC 918,
+ USC/Information Sciences Institute, October 1984.
+
+ [RFC937] Butler, M., J. Postel, D. Chase, J. Goldberger, and J.
+ Reynolds, "Post Office Protocol - Version 2", RFC 937,
+ USC/Information Sciences Institute, February 1985.
+
+Author's Address:
+
+
+ Marshall Rose
+ The Wollongong Group
+ 1129 San Antonio Rd.
+ Palo Alto, California 94303
+
+ Phone: (415) 962-7100
+
+ Email: MRose@TWG.COM
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Rose [Page 11]
+
OpenPOWER on IntegriCloud