diff options
Diffstat (limited to 'crypto/bn/asm/mo-586.pl')
| -rwxr-xr-x | crypto/bn/asm/mo-586.pl | 603 |
1 files changed, 603 insertions, 0 deletions
diff --git a/crypto/bn/asm/mo-586.pl b/crypto/bn/asm/mo-586.pl new file mode 100755 index 0000000..0982293 --- /dev/null +++ b/crypto/bn/asm/mo-586.pl @@ -0,0 +1,603 @@ +#!/usr/bin/env perl + +# This is crypto/bn/asm/x86-mont.pl (with asciz from crypto/perlasm/x86asm.pl) +# from OpenSSL 0.9.9-dev + +sub ::asciz +{ my @str=unpack("C*",shift); + push @str,0; + while ($#str>15) { + &data_byte(@str[0..15]); + foreach (0..15) { shift @str; } + } + &data_byte(@str) if (@str); +} + +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== + +# October 2005 +# +# This is a "teaser" code, as it can be improved in several ways... +# First of all non-SSE2 path should be implemented (yes, for now it +# performs Montgomery multiplication/convolution only on SSE2-capable +# CPUs such as P4, others fall down to original code). Then inner loop +# can be unrolled and modulo-scheduled to improve ILP and possibly +# moved to 128-bit XMM register bank (though it would require input +# rearrangement and/or increase bus bandwidth utilization). Dedicated +# squaring procedure should give further performance improvement... +# Yet, for being draft, the code improves rsa512 *sign* benchmark by +# 110%(!), rsa1024 one - by 70% and rsa4096 - by 20%:-) + +# December 2006 +# +# Modulo-scheduling SSE2 loops results in further 15-20% improvement. +# Integer-only code [being equipped with dedicated squaring procedure] +# gives ~40% on rsa512 sign benchmark... + +push(@INC,"perlasm","../../perlasm"); +require "x86asm.pl"; + +&asm_init($ARGV[0],$0); + +$sse2=0; +for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); } + +&external_label("OPENSSL_ia32cap_P") if ($sse2); + +&function_begin("bn_mul_mont"); + +$i="edx"; +$j="ecx"; +$ap="esi"; $tp="esi"; # overlapping variables!!! +$rp="edi"; $bp="edi"; # overlapping variables!!! +$np="ebp"; +$num="ebx"; + +$_num=&DWP(4*0,"esp"); # stack top layout +$_rp=&DWP(4*1,"esp"); +$_ap=&DWP(4*2,"esp"); +$_bp=&DWP(4*3,"esp"); +$_np=&DWP(4*4,"esp"); +$_n0=&DWP(4*5,"esp"); $_n0q=&QWP(4*5,"esp"); +$_sp=&DWP(4*6,"esp"); +$_bpend=&DWP(4*7,"esp"); +$frame=32; # size of above frame rounded up to 16n + + &xor ("eax","eax"); + &mov ("edi",&wparam(5)); # int num + &cmp ("edi",4); + &jl (&label("just_leave")); + + &lea ("esi",&wparam(0)); # put aside pointer to argument block + &lea ("edx",&wparam(1)); # load ap + &mov ("ebp","esp"); # saved stack pointer! + &add ("edi",2); # extra two words on top of tp + &neg ("edi"); + &lea ("esp",&DWP(-$frame,"esp","edi",4)); # alloca($frame+4*(num+2)) + &neg ("edi"); + + # minimize cache contention by arraning 2K window between stack + # pointer and ap argument [np is also position sensitive vector, + # but it's assumed to be near ap, as it's allocated at ~same + # time]. + &mov ("eax","esp"); + &sub ("eax","edx"); + &and ("eax",2047); + &sub ("esp","eax"); # this aligns sp and ap modulo 2048 + + &xor ("edx","esp"); + &and ("edx",2048); + &xor ("edx",2048); + &sub ("esp","edx"); # this splits them apart modulo 4096 + + &and ("esp",-64); # align to cache line + + ################################# load argument block... + &mov ("eax",&DWP(0*4,"esi"));# BN_ULONG *rp + &mov ("ebx",&DWP(1*4,"esi"));# const BN_ULONG *ap + &mov ("ecx",&DWP(2*4,"esi"));# const BN_ULONG *bp + &mov ("edx",&DWP(3*4,"esi"));# const BN_ULONG *np + &mov ("esi",&DWP(4*4,"esi"));# const BN_ULONG *n0 + #&mov ("edi",&DWP(5*4,"esi"));# int num + + &mov ("esi",&DWP(0,"esi")); # pull n0[0] + &mov ($_rp,"eax"); # ... save a copy of argument block + &mov ($_ap,"ebx"); + &mov ($_bp,"ecx"); + &mov ($_np,"edx"); + &mov ($_n0,"esi"); + &lea ($num,&DWP(-3,"edi")); # num=num-1 to assist modulo-scheduling + #&mov ($_num,$num); # redundant as $num is not reused + &mov ($_sp,"ebp"); # saved stack pointer! + +if($sse2) { +$acc0="mm0"; # mmx register bank layout +$acc1="mm1"; +$car0="mm2"; +$car1="mm3"; +$mul0="mm4"; +$mul1="mm5"; +$temp="mm6"; +$mask="mm7"; + + &picmeup("eax","OPENSSL_ia32cap_P"); + &bt (&DWP(0,"eax"),26); + &jnc (&label("non_sse2")); + + &mov ("eax",-1); + &movd ($mask,"eax"); # mask 32 lower bits + + &mov ($ap,$_ap); # load input pointers + &mov ($bp,$_bp); + &mov ($np,$_np); + + &xor ($i,$i); # i=0 + &xor ($j,$j); # j=0 + + &movd ($mul0,&DWP(0,$bp)); # bp[0] + &movd ($mul1,&DWP(0,$ap)); # ap[0] + &movd ($car1,&DWP(0,$np)); # np[0] + + &pmuludq($mul1,$mul0); # ap[0]*bp[0] + &movq ($car0,$mul1); + &movq ($acc0,$mul1); # I wish movd worked for + &pand ($acc0,$mask); # inter-register transfers + + &pmuludq($mul1,$_n0q); # *=n0 + + &pmuludq($car1,$mul1); # "t[0]"*np[0]*n0 + &paddq ($car1,$acc0); + + &movd ($acc1,&DWP(4,$np)); # np[1] + &movd ($acc0,&DWP(4,$ap)); # ap[1] + + &psrlq ($car0,32); + &psrlq ($car1,32); + + &inc ($j); # j++ +&set_label("1st",16); + &pmuludq($acc0,$mul0); # ap[j]*bp[0] + &pmuludq($acc1,$mul1); # np[j]*m1 + &paddq ($car0,$acc0); # +=c0 + &paddq ($car1,$acc1); # +=c1 + + &movq ($acc0,$car0); + &pand ($acc0,$mask); + &movd ($acc1,&DWP(4,$np,$j,4)); # np[j+1] + &paddq ($car1,$acc0); # +=ap[j]*bp[0]; + &movd ($acc0,&DWP(4,$ap,$j,4)); # ap[j+1] + &psrlq ($car0,32); + &movd (&DWP($frame-4,"esp",$j,4),$car1); # tp[j-1]= + &psrlq ($car1,32); + + &lea ($j,&DWP(1,$j)); + &cmp ($j,$num); + &jl (&label("1st")); + + &pmuludq($acc0,$mul0); # ap[num-1]*bp[0] + &pmuludq($acc1,$mul1); # np[num-1]*m1 + &paddq ($car0,$acc0); # +=c0 + &paddq ($car1,$acc1); # +=c1 + + &movq ($acc0,$car0); + &pand ($acc0,$mask); + &paddq ($car1,$acc0); # +=ap[num-1]*bp[0]; + &movd (&DWP($frame-4,"esp",$j,4),$car1); # tp[num-2]= + + &psrlq ($car0,32); + &psrlq ($car1,32); + + &paddq ($car1,$car0); + &movq (&QWP($frame,"esp",$num,4),$car1); # tp[num].tp[num-1] + + &inc ($i); # i++ +&set_label("outer"); + &xor ($j,$j); # j=0 + + &movd ($mul0,&DWP(0,$bp,$i,4)); # bp[i] + &movd ($mul1,&DWP(0,$ap)); # ap[0] + &movd ($temp,&DWP($frame,"esp")); # tp[0] + &movd ($car1,&DWP(0,$np)); # np[0] + &pmuludq($mul1,$mul0); # ap[0]*bp[i] + + &paddq ($mul1,$temp); # +=tp[0] + &movq ($acc0,$mul1); + &movq ($car0,$mul1); + &pand ($acc0,$mask); + + &pmuludq($mul1,$_n0q); # *=n0 + + &pmuludq($car1,$mul1); + &paddq ($car1,$acc0); + + &movd ($temp,&DWP($frame+4,"esp")); # tp[1] + &movd ($acc1,&DWP(4,$np)); # np[1] + &movd ($acc0,&DWP(4,$ap)); # ap[1] + + &psrlq ($car0,32); + &psrlq ($car1,32); + &paddq ($car0,$temp); # +=tp[1] + + &inc ($j); # j++ + &dec ($num); +&set_label("inner"); + &pmuludq($acc0,$mul0); # ap[j]*bp[i] + &pmuludq($acc1,$mul1); # np[j]*m1 + &paddq ($car0,$acc0); # +=c0 + &paddq ($car1,$acc1); # +=c1 + + &movq ($acc0,$car0); + &movd ($temp,&DWP($frame+4,"esp",$j,4));# tp[j+1] + &pand ($acc0,$mask); + &movd ($acc1,&DWP(4,$np,$j,4)); # np[j+1] + &paddq ($car1,$acc0); # +=ap[j]*bp[i]+tp[j] + &movd ($acc0,&DWP(4,$ap,$j,4)); # ap[j+1] + &psrlq ($car0,32); + &movd (&DWP($frame-4,"esp",$j,4),$car1);# tp[j-1]= + &psrlq ($car1,32); + &paddq ($car0,$temp); # +=tp[j+1] + + &dec ($num); + &lea ($j,&DWP(1,$j)); # j++ + &jnz (&label("inner")); + + &mov ($num,$j); + &pmuludq($acc0,$mul0); # ap[num-1]*bp[i] + &pmuludq($acc1,$mul1); # np[num-1]*m1 + &paddq ($car0,$acc0); # +=c0 + &paddq ($car1,$acc1); # +=c1 + + &movq ($acc0,$car0); + &pand ($acc0,$mask); + &paddq ($car1,$acc0); # +=ap[num-1]*bp[i]+tp[num-1] + &movd (&DWP($frame-4,"esp",$j,4),$car1); # tp[num-2]= + &psrlq ($car0,32); + &psrlq ($car1,32); + + &movd ($temp,&DWP($frame+4,"esp",$num,4)); # += tp[num] + &paddq ($car1,$car0); + &paddq ($car1,$temp); + &movq (&QWP($frame,"esp",$num,4),$car1); # tp[num].tp[num-1] + + &lea ($i,&DWP(1,$i)); # i++ + &cmp ($i,$num); + &jle (&label("outer")); + + &emms (); # done with mmx bank + &jmp (&label("common_tail")); + +&set_label("non_sse2",16); +} + +if (0) { + &mov ("esp",$_sp); + &xor ("eax","eax"); # signal "not fast enough [yet]" + &jmp (&label("just_leave")); + # While the below code provides competitive performance for + # all key lengthes on modern Intel cores, it's still more + # than 10% slower for 4096-bit key elsewhere:-( "Competitive" + # means compared to the original integer-only assembler. + # 512-bit RSA sign is better by ~40%, but that's about all + # one can say about all CPUs... +} else { +$inp="esi"; # integer path uses these registers differently +$word="edi"; +$carry="ebp"; + + &mov ($inp,$_ap); + &lea ($carry,&DWP(1,$num)); + &mov ($word,$_bp); + &xor ($j,$j); # j=0 + &mov ("edx",$inp); + &and ($carry,1); # see if num is even + &sub ("edx",$word); # see if ap==bp + &lea ("eax",&DWP(4,$word,$num,4)); # &bp[num] + &or ($carry,"edx"); + &mov ($word,&DWP(0,$word)); # bp[0] + &jz (&label("bn_sqr_mont")); + &mov ($_bpend,"eax"); + &mov ("eax",&DWP(0,$inp)); + &xor ("edx","edx"); + +&set_label("mull",16); + &mov ($carry,"edx"); + &mul ($word); # ap[j]*bp[0] + &add ($carry,"eax"); + &lea ($j,&DWP(1,$j)); + &adc ("edx",0); + &mov ("eax",&DWP(0,$inp,$j,4)); # ap[j+1] + &cmp ($j,$num); + &mov (&DWP($frame-4,"esp",$j,4),$carry); # tp[j]= + &jl (&label("mull")); + + &mov ($carry,"edx"); + &mul ($word); # ap[num-1]*bp[0] + &mov ($word,$_n0); + &add ("eax",$carry); + &mov ($inp,$_np); + &adc ("edx",0); + &imul ($word,&DWP($frame,"esp")); # n0*tp[0] + + &mov (&DWP($frame,"esp",$num,4),"eax"); # tp[num-1]= + &xor ($j,$j); + &mov (&DWP($frame+4,"esp",$num,4),"edx"); # tp[num]= + &mov (&DWP($frame+8,"esp",$num,4),$j); # tp[num+1]= + + &mov ("eax",&DWP(0,$inp)); # np[0] + &mul ($word); # np[0]*m + &add ("eax",&DWP($frame,"esp")); # +=tp[0] + &mov ("eax",&DWP(4,$inp)); # np[1] + &adc ("edx",0); + &inc ($j); + + &jmp (&label("2ndmadd")); + +&set_label("1stmadd",16); + &mov ($carry,"edx"); + &mul ($word); # ap[j]*bp[i] + &add ($carry,&DWP($frame,"esp",$j,4)); # +=tp[j] + &lea ($j,&DWP(1,$j)); + &adc ("edx",0); + &add ($carry,"eax"); + &mov ("eax",&DWP(0,$inp,$j,4)); # ap[j+1] + &adc ("edx",0); + &cmp ($j,$num); + &mov (&DWP($frame-4,"esp",$j,4),$carry); # tp[j]= + &jl (&label("1stmadd")); + + &mov ($carry,"edx"); + &mul ($word); # ap[num-1]*bp[i] + &add ("eax",&DWP($frame,"esp",$num,4)); # +=tp[num-1] + &mov ($word,$_n0); + &adc ("edx",0); + &mov ($inp,$_np); + &add ($carry,"eax"); + &adc ("edx",0); + &imul ($word,&DWP($frame,"esp")); # n0*tp[0] + + &xor ($j,$j); + &add ("edx",&DWP($frame+4,"esp",$num,4)); # carry+=tp[num] + &mov (&DWP($frame,"esp",$num,4),$carry); # tp[num-1]= + &adc ($j,0); + &mov ("eax",&DWP(0,$inp)); # np[0] + &mov (&DWP($frame+4,"esp",$num,4),"edx"); # tp[num]= + &mov (&DWP($frame+8,"esp",$num,4),$j); # tp[num+1]= + + &mul ($word); # np[0]*m + &add ("eax",&DWP($frame,"esp")); # +=tp[0] + &mov ("eax",&DWP(4,$inp)); # np[1] + &adc ("edx",0); + &mov ($j,1); + +&set_label("2ndmadd",16); + &mov ($carry,"edx"); + &mul ($word); # np[j]*m + &add ($carry,&DWP($frame,"esp",$j,4)); # +=tp[j] + &lea ($j,&DWP(1,$j)); + &adc ("edx",0); + &add ($carry,"eax"); + &mov ("eax",&DWP(0,$inp,$j,4)); # np[j+1] + &adc ("edx",0); + &cmp ($j,$num); + &mov (&DWP($frame-8,"esp",$j,4),$carry); # tp[j-1]= + &jl (&label("2ndmadd")); + + &mov ($carry,"edx"); + &mul ($word); # np[j]*m + &add ($carry,&DWP($frame,"esp",$num,4)); # +=tp[num-1] + &adc ("edx",0); + &add ($carry,"eax"); + &adc ("edx",0); + &mov (&DWP($frame-4,"esp",$num,4),$carry); # tp[num-2]= + + &xor ("eax","eax"); + &mov ($j,$_bp); # &bp[i] + &add ("edx",&DWP($frame+4,"esp",$num,4)); # carry+=tp[num] + &adc ("eax",&DWP($frame+8,"esp",$num,4)); # +=tp[num+1] + &lea ($j,&DWP(4,$j)); + &mov (&DWP($frame,"esp",$num,4),"edx"); # tp[num-1]= + &cmp ($j,$_bpend); + &mov (&DWP($frame+4,"esp",$num,4),"eax"); # tp[num]= + &je (&label("common_tail")); + + &mov ($word,&DWP(0,$j)); # bp[i+1] + &mov ($inp,$_ap); + &mov ($_bp,$j); # &bp[++i] + &xor ($j,$j); + &xor ("edx","edx"); + &mov ("eax",&DWP(0,$inp)); + &jmp (&label("1stmadd")); + +&set_label("bn_sqr_mont",16); +$sbit=$num; + &mov ($_num,$num); + &mov ($_bp,$j); # i=0 + + &mov ("eax",$word); # ap[0] + &mul ($word); # ap[0]*ap[0] + &mov (&DWP($frame,"esp"),"eax"); # tp[0]= + &mov ($sbit,"edx"); + &shr ("edx",1); + &and ($sbit,1); + &inc ($j); +&set_label("sqr",16); + &mov ("eax",&DWP(0,$inp,$j,4)); # ap[j] + &mov ($carry,"edx"); + &mul ($word); # ap[j]*ap[0] + &add ("eax",$carry); + &lea ($j,&DWP(1,$j)); + &adc ("edx",0); + &lea ($carry,&DWP(0,$sbit,"eax",2)); + &shr ("eax",31); + &cmp ($j,$_num); + &mov ($sbit,"eax"); + &mov (&DWP($frame-4,"esp",$j,4),$carry); # tp[j]= + &jl (&label("sqr")); + + &mov ("eax",&DWP(0,$inp,$j,4)); # ap[num-1] + &mov ($carry,"edx"); + &mul ($word); # ap[num-1]*ap[0] + &add ("eax",$carry); + &mov ($word,$_n0); + &adc ("edx",0); + &mov ($inp,$_np); + &lea ($carry,&DWP(0,$sbit,"eax",2)); + &imul ($word,&DWP($frame,"esp")); # n0*tp[0] + &shr ("eax",31); + &mov (&DWP($frame,"esp",$j,4),$carry); # tp[num-1]= + + &lea ($carry,&DWP(0,"eax","edx",2)); + &mov ("eax",&DWP(0,$inp)); # np[0] + &shr ("edx",31); + &mov (&DWP($frame+4,"esp",$j,4),$carry); # tp[num]= + &mov (&DWP($frame+8,"esp",$j,4),"edx"); # tp[num+1]= + + &mul ($word); # np[0]*m + &add ("eax",&DWP($frame,"esp")); # +=tp[0] + &mov ($num,$j); + &adc ("edx",0); + &mov ("eax",&DWP(4,$inp)); # np[1] + &mov ($j,1); + +&set_label("3rdmadd",16); + &mov ($carry,"edx"); + &mul ($word); # np[j]*m + &add ($carry,&DWP($frame,"esp",$j,4)); # +=tp[j] + &adc ("edx",0); + &add ($carry,"eax"); + &mov ("eax",&DWP(4,$inp,$j,4)); # np[j+1] + &adc ("edx",0); + &mov (&DWP($frame-4,"esp",$j,4),$carry); # tp[j-1]= + + &mov ($carry,"edx"); + &mul ($word); # np[j+1]*m + &add ($carry,&DWP($frame+4,"esp",$j,4)); # +=tp[j+1] + &lea ($j,&DWP(2,$j)); + &adc ("edx",0); + &add ($carry,"eax"); + &mov ("eax",&DWP(0,$inp,$j,4)); # np[j+2] + &adc ("edx",0); + &cmp ($j,$num); + &mov (&DWP($frame-8,"esp",$j,4),$carry); # tp[j]= + &jl (&label("3rdmadd")); + + &mov ($carry,"edx"); + &mul ($word); # np[j]*m + &add ($carry,&DWP($frame,"esp",$num,4)); # +=tp[num-1] + &adc ("edx",0); + &add ($carry,"eax"); + &adc ("edx",0); + &mov (&DWP($frame-4,"esp",$num,4),$carry); # tp[num-2]= + + &mov ($j,$_bp); # i + &xor ("eax","eax"); + &mov ($inp,$_ap); + &add ("edx",&DWP($frame+4,"esp",$num,4)); # carry+=tp[num] + &adc ("eax",&DWP($frame+8,"esp",$num,4)); # +=tp[num+1] + &mov (&DWP($frame,"esp",$num,4),"edx"); # tp[num-1]= + &cmp ($j,$num); + &mov (&DWP($frame+4,"esp",$num,4),"eax"); # tp[num]= + &je (&label("common_tail")); + + &mov ($word,&DWP(4,$inp,$j,4)); # ap[i] + &lea ($j,&DWP(1,$j)); + &mov ("eax",$word); + &mov ($_bp,$j); # ++i + &mul ($word); # ap[i]*ap[i] + &add ("eax",&DWP($frame,"esp",$j,4)); # +=tp[i] + &adc ("edx",0); + &mov (&DWP($frame,"esp",$j,4),"eax"); # tp[i]= + &xor ($carry,$carry); + &cmp ($j,$num); + &lea ($j,&DWP(1,$j)); + &je (&label("sqrlast")); + + &mov ($sbit,"edx"); # zaps $num + &shr ("edx",1); + &and ($sbit,1); +&set_label("sqradd",16); + &mov ("eax",&DWP(0,$inp,$j,4)); # ap[j] + &mov ($carry,"edx"); + &mul ($word); # ap[j]*ap[i] + &add ("eax",$carry); + &lea ($carry,&DWP(0,"eax","eax")); + &adc ("edx",0); + &shr ("eax",31); + &add ($carry,&DWP($frame,"esp",$j,4)); # +=tp[j] + &lea ($j,&DWP(1,$j)); + &adc ("eax",0); + &add ($carry,$sbit); + &adc ("eax",0); + &cmp ($j,$_num); + &mov (&DWP($frame-4,"esp",$j,4),$carry); # tp[j]= + &mov ($sbit,"eax"); + &jle (&label("sqradd")); + + &mov ($carry,"edx"); + &lea ("edx",&DWP(0,$sbit,"edx",2)); + &shr ($carry,31); +&set_label("sqrlast"); + &mov ($word,$_n0); + &mov ($inp,$_np); + &imul ($word,&DWP($frame,"esp")); # n0*tp[0] + + &add ("edx",&DWP($frame,"esp",$j,4)); # +=tp[num] + &mov ("eax",&DWP(0,$inp)); # np[0] + &adc ($carry,0); + &mov (&DWP($frame,"esp",$j,4),"edx"); # tp[num]= + &mov (&DWP($frame+4,"esp",$j,4),$carry); # tp[num+1]= + + &mul ($word); # np[0]*m + &add ("eax",&DWP($frame,"esp")); # +=tp[0] + &lea ($num,&DWP(-1,$j)); + &adc ("edx",0); + &mov ($j,1); + &mov ("eax",&DWP(4,$inp)); # np[1] + + &jmp (&label("3rdmadd")); +} + +&set_label("common_tail",16); + &mov ($np,$_np); # load modulus pointer + &mov ($rp,$_rp); # load result pointer + &lea ($tp,&DWP($frame,"esp")); # [$ap and $bp are zapped] + + &mov ("eax",&DWP(0,$tp)); # tp[0] + &mov ($j,$num); # j=num-1 + &xor ($i,$i); # i=0 and clear CF! + +&set_label("sub",16); + &sbb ("eax",&DWP(0,$np,$i,4)); + &mov (&DWP(0,$rp,$i,4),"eax"); # rp[i]=tp[i]-np[i] + &dec ($j); # doesn't affect CF! + &mov ("eax",&DWP(4,$tp,$i,4)); # tp[i+1] + &lea ($i,&DWP(1,$i)); # i++ + &jge (&label("sub")); + + &sbb ("eax",0); # handle upmost overflow bit + &and ($tp,"eax"); + ¬ ("eax"); + &mov ($np,$rp); + &and ($np,"eax"); + &or ($tp,$np); # tp=carry?tp:rp + +&set_label("copy",16); # copy or in-place refresh + &mov ("eax",&DWP(0,$tp,$num,4)); + &mov (&DWP(0,$rp,$num,4),"eax"); # rp[i]=tp[i] + &mov (&DWP($frame,"esp",$num,4),$j); # zap temporary vector + &dec ($num); + &jge (&label("copy")); + + &mov ("esp",$_sp); # pull saved stack pointer + &mov ("eax",1); +&set_label("just_leave"); +&function_end("bn_mul_mont"); + +&asciz("Montgomery Multiplication for x86, CRYPTOGAMS by <appro\@openssl.org>"); + +&asm_finish(); |
