diff options
Diffstat (limited to 'contrib')
-rw-r--r-- | contrib/binutils/etc/cfg-paper.texi | 717 | ||||
-rw-r--r-- | contrib/binutils/etc/configure.man | 166 | ||||
-rw-r--r-- | contrib/binutils/etc/configure.texi | 2644 |
3 files changed, 0 insertions, 3527 deletions
diff --git a/contrib/binutils/etc/cfg-paper.texi b/contrib/binutils/etc/cfg-paper.texi deleted file mode 100644 index bcfbb31..0000000 --- a/contrib/binutils/etc/cfg-paper.texi +++ /dev/null @@ -1,717 +0,0 @@ -\input texinfo -@c %**start of header -@setfilename cfg-paper.info -@settitle On Configuring Development Tools -@c %**end of header -@setchapternewpage off - -@ifinfo -This document attempts to describe the general concepts behind -configuration of the @sc{gnu} Development Tools. -It also discusses common usage. - -Copyright (C) 1991, 1992, 1994 Cygnus Support -Permission is granted to make and distribute verbatim copies of -this manual provided the copyright notice and this permission notice -are preserved on all copies. - -@ignore -Permission is granted to process this file through TeX and print the -results, provided the printed document carries copying permission -notice identical to this one except for the removal of this paragraph -(this paragraph not being relevant to the printed manual). - -@end ignore -Permission is granted to copy and distribute modified versions of this -manual under the conditions for verbatim copying, provided that the entire -resulting derived work is distributed under the terms of a permission -notice identical to this one. - -Permission is granted to copy and distribute translations of this manual -into another language, under the above conditions for modified versions, -except that this permission notice may be stated in a translation approved -by Cygnus Support. -@end ifinfo - -@titlepage -@sp 10 -@title{On Configuring Development Tools} -@author{K. Richard Pixley, @code{rich@@cygnus.com}} -@author{Cygnus Support} -@page - -@vskip 0pt plus 1filll -Copyright @copyright{} 1991, 1992, 1994 Cygnus Support - -Permission is granted to make and distribute verbatim copies of -this manual provided the copyright notice and this permission notice -are preserved on all copies. - -Permission is granted to copy and distribute modified versions of this -manual under the conditions for verbatim copying, provided that the entire -resulting derived work is distributed under the terms of a permission -notice identical to this one. - -Permission is granted to copy and distribute translations of this manual -into another language, under the above conditions for modified versions, -except that this permission notice may be stated in a translation approved -by Cygnus Support. -@end titlepage - -@ifinfo -@format -START-INFO-DIR-ENTRY -* configuration: (cfg-paper). Some theory on configuring source. -END-INFO-DIR-ENTRY -@end format -@end ifinfo - -@node top, Some Basic Terms, (dir), (dir) - -@ifinfo -This document attempts to describe the general concepts behind -configuration of the @sc{gnu} Development Tools. -It also discusses common usage. -@end ifinfo - -@menu -* Some Basic Terms:: Some Basic Terms -* Specifics.:: Specifics -* Building Development Environments:: Building Development Environments -* A Walk Through:: A Walk Through -* Final Notes:: Final Notes -* Index:: Index - - --- The Detailed Node Listing --- - -Some Basic Terms - -* Host Environments:: Host Environments -* Configuration Time Options:: Configuration Time Options - -A Walk Through - -* Native Development Environments:: Native Development Environments -* Emulation Environments:: Emulation Environments -* Simple Cross Environments:: Simple Cross Environments -* Crossing Into Targets:: Crossing Into Targets -* Canadian Cross:: Canadian Cross - -Final Notes - -* Hacking Configurations:: Hacking Configurations -@end menu - -@node Some Basic Terms, Specifics., top, top -@chapter Some Basic Terms - -There are a lot of terms that are frequently used when discussing -development tools. Most of the common terms have been used for many -different concepts such that their meanings have become ambiguous to the -point of being confusing. Typically, we only guess at their meanings -from context and we frequently guess wrong. - -This document uses very few terms by comparison. The intent is to make -the concepts as clear as possible in order to convey the usage and -intent of these tools. - -@emph{Programs} run on @emph{machines}. Programs are very nearly always -written in @emph{source}. Programs are @emph{built} from source. -@emph{Compilation} is a process that is frequently, but not always, used -when building programs. -@cindex Programs -@cindex Machines -@cindex Source -@cindex Building -@cindex Compilation - -@menu -* Host Environments:: Host Environments -* Configuration Time Options:: Configuration Time Options -@end menu - -@node Host Environments, Configuration Time Options, Some Basic Terms, Some Basic Terms -@section Host Environments - -@cindex host -In this document, the word @emph{host} refers to the environment in -which the source in question will be compiled. @emph{host} and -@emph{host name} have nothing to do with the proper name of your host, -like @emph{ucbvax}, @emph{prep.ai.mit.edu} or @emph{att.com}. Instead -they refer to things like @emph{sun4} and @emph{dec3100}. - -Forget for a moment that this particular directory of source is the -source for a development environment. Instead, pretend that it is the -source for a simpler, more mundane, application, say, a desk calculator. - -Source that can be compiled in more than one environment, generally -needs to be set up for each environment explicitly. Here we refer to -that process as configuration. That is, we configure the source for a -host. - -For example, if we wanted to configure our mythical desk calculator to -compile on a SparcStation, we might configure for host sun4. With our -configuration system: - -@example -cd desk-calculator ; ./configure sun4 -@end example - -@noindent -does the trick. @code{configure} is a shell script that sets up Makefiles, -subdirectories, and symbolic links appropriate for compiling the source -on a sun4. - -The @emph{host} environment does not necessarily refer to the machine on -which the tools are built. It is possible to provide a sun3 development -environment on a sun4. If we wanted to use a cross compiler on the sun4 -to build a program intended to be run on a sun3, we would configure the -source for sun3. - -@example -cd desk-calculator ; ./configure sun3 -@end example - -@noindent -The fact that we are actually building the program on a sun4 makes no -difference if the sun3 cross compiler presents an environment that looks -like a sun3 from the point of view of the desk calculator source code. -Specifically, the environment is a sun3 environment if the header files, -predefined symbols, and libraries appear as they do on a sun3. - -Nor does the host environment refer to the the machine on which the -program to be built will run. It is possible to provide a sun3 -emulation environment on a sun4 such that programs built in a sun3 -development environment actually run on the sun4. This technique is -often used within individual programs to remedy deficiencies in the host -operating system. For example, some operating systems do not provide -the @code{bcopy} function and so it is emulated using the -@code{memcpy} funtion. - -Host environment simply refers to the environment in which the program -will be built from the source. - - -@node Configuration Time Options, , Host Environments, Some Basic Terms -@section Configuration Time Options - -Many programs have compile time options. That is, features of the -program that are either compiled into the program or not based on a -choice made by the person who builds the program. We refer to these as -@emph{configuration options}. For example, our desk calculator might be -capable of being compiled into a program that either uses infix notation -or postfix as a configuration option. For a sun3, to choose infix you -might use: - -@example -./configure sun3 --enable-notation=infix -@end example - -@noindent -while for a sun4 with postfix you might use: - -@example -./configure sun4 --enable-notation=postfix -@end example - -If we wanted to build both at the same time, the intermediate pieces -used in the build process must be kept separate. - -@example -mkdir ../objdir.sun4 -(cd ../objdir.sun4 ; ../configure sun4 --enable-notation=postfix --srcdir=../src) -mkdir ../objdir.sun3 -(cd ../objdir.sun3 ; ../configure sun3 --enable-notation=infix --srcdir=../src) -@end example - -@noindent -will create subdirectories for the intermediate pieces of the sun4 and -sun3 configurations. This is necessary as previous systems were only -capable of one configuration at a time. Otherwise, a second -configuration would write over the first. We've chosen to retain this -behaviour so the obj directories and the @code{--srcdir} configuration -option are necessary to get the new behaviour. The order of the -arguments doesn't matter. There should be exactly one argument without -a leading @samp{-} and that argument will be assumed to be the host -name. - -From here on the examples will assume that you want to build the tools -@emph{in place} and won't show the @code{--srcdir} option, but remember -that it is available. - -In order to actually install the program, the configuration system needs -to know where you would like the program installed. The default -location is @file{/usr/local}. We refer to this location as -@code{$(prefix)}. All user visible programs will be installed in -@file{@code{$(prefix)}/bin}. All other programs and files will be -installed in a subdirectory of @file{@code{$(prefix)}/lib}. - -You can only change @code{$(prefix)} as a configuration time -option. - -@example -./configure sun4 --enable-notation=postfix --prefix=/local -@end example - -@noindent -Will configure the source such that: - -@example -make install -@end example - -@noindent -will put its programs in @file{/local/bin} and @file{/local/lib/gcc}. -If you change @code{$(prefix)} after building the source, you will need -to: - -@example -make clean -@end example - -@noindent -before the change will be propogated properly. This is because some -tools need to know the locations of other tools. - -With these concepts in mind, we can drop the desk calculator example and -move on to the application that resides in these directories, namely, -the source to a development environment. - -@node Specifics., Building Development Environments, Some Basic Terms, top -@chapter Specifics - -The @sc{gnu} Development Tools can be built on a wide variety of hosts. So, -of course, they must be configured. Like the last example, - -@example -./configure sun4 --prefix=/local -./configure sun3 --prefix=/local -@end example - -@noindent -will configure the source to be built in subdirectories, in order to -keep the intermediate pieces separate, and to be installed in -@file{/local}. - -When built with suitable development environments, these will be native -tools. We'll explain the term @emph{native} later. - -@node Building Development Environments, A Walk Through, Specifics., top -@chapter Building Development Environments - -@cindex Target - -The @sc{gnu} development tools can not only be built in a -number of host development environments, they can also be configured to -create a number of different development environments on each of those -hosts. We refer to a specific development environment created as a -@emph{target}. That is, the word @emph{target} refers to the development -environment produced by compiling this source and installing the -resulting programs. - -For the @sc{gnu} development tools, the default target is the -same as the host. That is, the development environment produced is -intended to be compatible with the environment used to build the tools. - -In the example above, we created two configurations, one for sun4 and -one for sun3. The first configuration is expecting to be built in a -sun4 development environment, to create a sun4 development environment. -It doesn't necessarily need to be built on a sun4 if a sun4 development -environment is available elsewhere. Likewise, if the available sun4 -development environment produces executables intended for something -other than sun4, then the development environment built from this sun4 -configuration will run on something other than a sun4. From the point -of view of the configuration system and the @sc{gnu} development tools -source, this doesn't matter. What matters is that they will be built in -a sun4 environment. - -Similarly, the second configuration given above is expecting to be built -in a sun3 development environment, to create a sun3 development -environment. - -The development environment produced is a configuration time option, -just like @code{$(prefix)}. - -@example -./configure sun4 --prefix=/local --target=sun3 -./configure sun3 --prefix=/local --target=sun4 -@end example - -In this example, like before, we create two configurations. The first -is intended to be built in a sun4 environment, in subdirectories, to be -installed in @file{/local}. The second is intended to be built in a -sun3 environment, in subdirectories, to be installed in @file{/local}. - -Unlike the previous example, the first configuration will produce a sun3 -development environment, perhaps even suitable for building the second -configuration. Likewise, the second configuration will produce a sun4 -development environment, perhaps even suitable for building the first -configuration. - -The development environment used to build these configurations will -determine the machines on which the resulting development environments -can be used. - - -@node A Walk Through, Final Notes, Building Development Environments, top -@chapter A Walk Through - - -@menu -* Native Development Environments:: Native Development Environments -* Emulation Environments:: Emulation Environments -* Simple Cross Environments:: Simple Cross Environments -* Crossing Into Targets:: Crossing Into Targets -* Canadian Cross:: Canadian Cross -@end menu - -@node Native Development Environments, Emulation Environments, A Walk Through, A Walk Through -@section Native Development Environments - -Let us assume for a moment that you have a sun4 and that with your sun4 -you received a development environment. This development environment is -intended to be run on your sun4 to build programs that can be run on -your sun4. You could, for instance, run this development environment on -your sun4 to build our example desk calculator program. You could then -run the desk calculator program on your sun4. - -@cindex Native -@cindex Foreign -The resulting desk calculator program is referred to as a @emph{native} -program. The development environment itself is composed of native -programs that, when run, build other native programs. Any other program -is referred to as @emph{foreign}. Programs intended for other machines are -foreign programs. - -This type of development environment, which is by far the most common, -is refered to as @emph{native}. That is, a native development environment -runs on some machine to build programs for that same machine. The -process of using a native development environment to build native -programs is called a @emph{native} build. - -@example -./configure sun4 -@end example - -@noindent -will configure this source such that when built in a sun4 development -environment, with a development environment that builds programs -intended to be run on sun4 machines, the programs built will be native -programs and the resulting development environment will be a native -development environment. - -The development system that came with your sun4 is one such environment. -Using it to build the @sc{gnu} Development Tools is a very common activity -and the resulting development environment is quite popular. - -@example -make all -@end example - -@noindent -will build the tools as configured and will assume that you want to use -the native development environment that came with your machine. - -@cindex Bootstrapping -@cindex Stage1 -Using a development environment to build a development environment is -called @emph{bootstrapping}. The release of the @sc{gnu} -Development Tools is capable of bootstrapping itself. This is a very -powerful feature that we'll return to later. For now, let's pretend -that you used the native development environment that came with your -sun4 to bootstrap the release and let's call the new -development environment @emph{stage1}. - -Why bother? Well, most people find that the @sc{gnu} development -environment builds programs that run faster and take up less space than -the native development environments that came with their machines. Some -people didn't get development environments with their machines and some -people just like using the @sc{gnu} tools better than using other tools. - -@cindex Stage2 -While you're at it, if the @sc{gnu} tools produce better programs, maybe you -should use them to build the @sc{gnu} tools. So let's -pretend that you do. Let's call the new development environment -@emph{stage2}. - -@cindex Stage3 -So far you've built a development environment, stage1, and you've used -stage1 to build a new, faster and smaller development environment, -stage2, but you haven't run any of the programs that the @sc{gnu} tools have -built. You really don't yet know if these tools work. Do you have any -programs built with the @sc{gnu} tools? Yes, you do. stage2. What does -that program do? It builds programs. Ok, do you have any source handy -to build into a program? Yes, you do. The @sc{gnu} tools themselves. In -fact, if you use stage2 to build the @sc{gnu} tools again the resulting -programs should be identical to stage2. Let's pretend that you do and -call the new development environment @emph{stage3}. - -@cindex Three stage boot -You've just completed what's called a @emph{three stage boot}. You now have -a small, fast, somewhat tested, development environment. - -@example -make bootstrap -@end example - -@noindent -will do a three stage boot across all tools and will compare stage2 to -stage3 and complain if they are not identical. - -Once built, - -@example -make install -@end example - -@noindent -will install the development environment in the default location, or in -@code{$(prefix)} if you specified an alternate when you configured. - -@cindex Cross -Any development environment that is not a native development environment -is refered to as a @emph{cross} development environment. There are many -different types of cross development environments but most fall into one -of three basic categories. - - -@node Emulation Environments, Simple Cross Environments, Native Development Environments, A Walk Through -@section Emulation Environments - -@cindex Emulation -The first category of cross development environment is called -@emph{emulation}. There are two primary types of emulation, but both -types result in programs that run on the native host. - -@cindex Software emulation -@cindex Software emulator -The first type is @emph{software emulation}. This form of cross -development environment involves a native program that when run on the -native host, is capable of interpreting, and in most aspects running, a -program intended for some other machine. This technique is typically -used when the other machine is either too expensive, too slow, too fast, -or not available, perhaps because it hasn't yet been built. The native, -interpreting program is called a @emph{software emulator}. - -The @sc{gnu} Development Tools do not currently include any software -emulators. Some do exist and the @sc{gnu} Development Tools can be -configured to create simple cross development environments for with -these emulators. More on this later. - -The second type of emulation is when source intended for some other -development environment is built into a program intended for the native -host. The concepts of operating system universes and hosted operating -systems are two such development environments. - -@node Simple Cross Environments, Crossing Into Targets, Emulation Environments, A Walk Through -@section Simple Cross Environments - -@example -./configure sun4 --target=a29k -@end example - -@noindent -will configure the tools such that when compiled in a sun4 development -environment the resulting development environment can be used to create -programs intended for an a29k. Again, this does not necessarily mean -that the new development environment can be run on a sun4. That would -depend on the development environment used to build these tools. - -Earlier you saw how to configure the tools to build a native development -environment, that is, a development environment that runs on your sun4 -and builds programs for your sun4. Let's pretend that you use stage3 to -build this simple cross configuration and let's call the new development -environment gcc-a29k. Remember that this is a native build. Gcc-a29k -is a collection of native programs intended to run on your sun4. That's -what stage3 builds, programs for your sun4. Gcc-a29k represents an a29k -development environment that builds programs intended to run on an a29k. -But, remember, gcc-a29k runs on your sun4. Programs built with gcc-a29k -will run on your sun4 only with the help of an appropriate software -emulator. - -@cindex Simple cross -@cindex Crossing to -Building gcc-a29k is also a bootstrap but of a slightly different sort. -We call gcc-a29k a @emph{simple cross} environment and using gcc-a29k to -build a program intended for a29k is called @emph{crossing to} a29k. -Simple cross environments are the second category of cross development -environments. - - -@node Crossing Into Targets, Canadian Cross, Simple Cross Environments, A Walk Through -@section Crossing Into Targets - -@example -./configure a29k --target=a29k -@end example - -@noindent -will configure the tools such that when compiled in an a29k development -environment, the resulting development environment can be used to create -programs intended for an a29k. Again, this does not necessarily mean -that the new development environment can be run on an a29k. That would -depend on the development environment used to build these tools. - -If you've been following along this walk through, then you've already -built an a29k environment, namely gcc-a29k. Let's pretend you use -gcc-a29k to build the current configuration. - -Gcc-a29k builds programs intended for the a29k so the new development -environment will be intended for use on an a29k. That is, this new gcc -consists of programs that are foreign to your sun4. They cannot be run -on your sun4. - -@cindex Crossing into -The process of building this configuration is a another bootstrap. This -bootstrap is also a cross to a29k. Because this type of build is both a -bootstrap and a cross to a29k, it is sometimes referred to as a -@emph{cross into} a29k. This new development environment isn't really a -cross development environment at all. It is intended to run on an a29k -to produce programs for an a29k. You'll remember that this makes it, by -definition, an a29k native compiler. @emph{Crossing into} has been -introduced here not because it is a type of cross development -environment, but because it is frequently mistaken as one. The process -is @emph{a cross} but the resulting development environment is a native -development environment. - -You could not have built this configuration with stage3, because stage3 -doesn't provide an a29k environment. Instead it provides a sun4 -environment. - -If you happen to have an a29k lying around, you could now use this fresh -development environment on the a29k to three-stage these tools all over -again. This process would look just like it did when we built the -native sun4 development environment because we would be building another -native development environment, this one on a29k. - - -@node Canadian Cross, , Crossing Into Targets, A Walk Through -@section Canadian Cross - -So far you've seen that our development environment source must be -configured for a specific host and for a specific target. You've also -seen that the resulting development environment depends on the -development environment used in the build process. - -When all four match identically, that is, the configured host, the -configured target, the environment presented by the development -environment used in the build, and the machine on which the resulting -development environment is intended to run, then the new development -environment will be a native development environment. - -When all four match except the configured host, then we can assume that -the development environment used in the build is some form of library -emulation. - -When all four match except for the configured target, then the resulting -development environment will be a simple cross development environment. - -When all four match except for the host on which the development -environment used in the build runs, the build process is a @emph{cross into} -and the resulting development environment will be native to some other -machine. - -Most of the other permutations do exist in some form, but only one more -is interesting to the current discussion. - -@example -./configure a29k --target=sun3 -@end example - -@noindent -will configure the tools such that when compiled in an a29k development -environment, the resulting development environment can be used to create -programs intended for a sun3. Again, this does not necessarily mean -that the new development environment can be run on an a29k. That would -depend on the development environment used to build these tools. - -If you are still following along, then you have two a29k development -environments, the native development environment that runs on a29k, and -the simple cross that runs on your sun4. If you use the a29k native -development environment on the a29k, you will be doing the same thing we -did a while back, namely building a simple cross from a29k to sun3. -Let's pretend that instead, you use gcc-a29k, the simple cross -development environment that runs on sun4 but produces programs for -a29k. - -The resulting development environment will run on a29k because that's -what gcc-a29k builds, a29k programs. This development environment will -produce programs for a sun3 because that is how it was configured. This -means that the resulting development environment is a simple cross. - -@cindex Canadian Cross -@cindex Three party cross -There really isn't a common name for this process because very few -development environments are capable of being configured this -extensively. For the sake of discussion, let's call this process a -@emph{Canadian cross}. It's a three party cross, Canada has a three -party system, hence Canadian Cross. - -@node Final Notes, Index, A Walk Through, top -@chapter Final Notes - -By @emph{configures}, I mean that links, Makefile, .gdbinit, and -config.status are built. Configuration is always done from the source -directory. - -@table @code - -@item ./configure @var{name} -configures this directory, perhaps recursively, for a single host+target -pair where the host and target are both @var{name}. If a previous -configuration existed, it will be overwritten. - -@item ./configure @var{hostname} --target=@var{targetname} -configures this directory, perhaps recursively, for a single host+target -pair where the host is @var{hostname} and target is @var{targetname}. -If a previous configuration existed, it will be overwritten. - -@end table - -@menu -* Hacking Configurations:: Hacking Configurations -@end menu - -@node Hacking Configurations, , Final Notes, Final Notes -@section Hacking Configurations - -The configure scripts essentially do three things, create subdirectories -if appropriate, build a @file{Makefile}, and create links to files, all -based on and tailored to, a specific host+target pair. The scripts also -create a @file{.gdbinit} if appropriate but this is not tailored. - -The Makefile is created by prepending some variable definitions to a -Makefile template called @file{Makefile.in} and then inserting host and -target specific Makefile fragments. The variables are set based on the -chosen host+target pair and build style, that is, if you use -@code{--srcdir} or not. The host and target specific Makefile may or may -not exist. - -@itemize @bullet - -@item -Makefiles can be edited directly, but those changes will eventually be -lost. Changes intended to be permanent for a specific host should be -made to the host specific Makefile fragment. This should be in -@file{./config/mh-@var{host}} if it exists. Changes intended to be -permanent for a specific target should be made to the target specific -Makefile fragment. This should be in @file{./config/mt-@var{target}} if -it exists. Changes intended to be permanent for the directory should be -made in @file{Makefile.in}. To propogate changes to any of these, -either use @code{make Makefile} or @code{./config.status} or -re-configure. - -@end itemize - -@page -@node Index, , Final Notes, top -@appendix Index - -@printindex cp - -@contents -@bye - -@c Local Variables: -@c fill-column: 72 -@c End: diff --git a/contrib/binutils/etc/configure.man b/contrib/binutils/etc/configure.man deleted file mode 100644 index a769904..0000000 --- a/contrib/binutils/etc/configure.man +++ /dev/null @@ -1,166 +0,0 @@ -.\" -*- nroff -*- -.\" Copyright (c) 1991, 1992, 1996 Cygnus Support -.\" written by K. Richard Pixley -.TH configure 1 "29 March 1996" "cygnus support" "Cygnus Support" -.de BP -.sp -.ti \-.2i -\(** -.. - -.SH NAME -configure \- prepare source code to be built - -.SH SYNOPSIS -configure HOST [--target=TARGET] [--srcdir=DIR] [--rm] - [--site=SITE] [--prefix=DIR] [--exec_prefix=DIR] - [--program_prefix=DIR] [--tmpdir=DIR] - [--with-PACKAGE[=YES/NO]] [--without-PACKAGE] - [--enable-FEATURE[=YES/NO]] [--disable-FEATURE] - [--norecursion] [--nfp] [-s] [-v] [-V | --version] [--help] - -.SH DESCRIPTION -.I configure -is a program used to prepare souce code to be built. It does this by -generating Makefiles and .gdbinit files, creating symlinks, recursing -in subdirectories, and some other miscellaneous file editing. - -.SH OPTIONS -.I configure -accepts the following options: - -.TP -.I \--target=TARGET -Requests that the sources be configured to target the -.I TARGET -machine. If no target is specified explicitly, the target is assumed -to be the same as the host. - -.TP -.I \--srcdir=DIR -tells configure to find the source in -.I DIR. -Object code is always built in the current directory, -.I `.'. - -.TP -.I \--rm -asks configure to remove a configuration rather than create one. - -.TP -.I \--site=SITE -asks configure to use any site-specific Makefile fragments for -.I SITE -when building Makefiles. - -.TP -.I \--prefix=DIR -sets the location in which to install files to -.I DIR. -The default is "/usr/local". - -.TP -.I \--exec_prefix=DIR -sets the root directory for host-dependent files to -.I DIR. -The default location is the value of -.I prefix. - -.TP -.I \--program_prefix=DIR -configures the source to install programs which have the same names as -common Unix programs, such as "make", in -.I DIR. -Also applies to programs which might be used for cross-compilation. - -.TP -.I \--tmpdir=DIR -sets the directory in which configure creates temporary files to -.I DIR. - -.TP -.I \--with-PACKAGE[=YES/NO] -sets a flag for the build to recognize that -.I PACKAGE -is explicitly present or not present. If -.I \=YES/NO -is nonexistent, the default is -.I YES. -.I \--without-PACKAGE -is equivalent to -.IR \--with-PACKAGE=no . - -.TP -.I \--enable-FEATURE[=YES/NO] -sets a flag for the build to recognize that -.I FEATURE -should be included or not included. If -.I \=YES/NO -is nonexistent, the default is -.I YES. -.I \--disable-FEATURE -is equivalent to -.IR --enable-FEATURE=no . - -.TP -.I \--norecursion -asks that only the current directory be configured. Normally -.I configure -recurs on subdirectories. - -.TP -.I \-nfp -Notifies -.I configure -that all of the specified hosts have -.I no floating point -units. - -.TP -.I \-s -used internally by configure to supress status messages on -subdirectory recursions. Override with -.I \-v - -.TP -.I \-v -verbose output. Asks that configure print status lines for each -directory configured. Normally, only the status lines for the current -directory are printed. - -.TP -.I \--version -.I \-V -prints -.I configure -version number. - -.TP -.I \-help -displays a brief usage summary. - - -.SH FILES -configure.in for each directory's individual needs -.br -Makefile.in Makefile template -.br -config.sub for parsing configuration names -.br -config.guess for guessing HOST when not specified -.br -config.status non-recursively rebuilds current directory - -.SH FILES -.ta \w'gmon.sum 'u -a.out the namelist and text space. -.br -gmon.out dynamic call graph and profile. -.br -gmon.sum summarized dynamic call graph and profile. - -.SH "SEE ALSO" -.RB "`\|" configure "\|'" -entry in -.B -info. diff --git a/contrib/binutils/etc/configure.texi b/contrib/binutils/etc/configure.texi deleted file mode 100644 index 9140167..0000000 --- a/contrib/binutils/etc/configure.texi +++ /dev/null @@ -1,2644 +0,0 @@ -\input texinfo -@c %**start of header -@setfilename configure.info -@settitle The GNU configure and build system -@setchapternewpage off -@c %**end of header - -@dircategory GNU admin -@direntry -* configure: (configure). The GNU configure and build system -@end direntry - -@ifinfo -This file documents the GNU configure and build system. - -Copyright (C) 1998 Cygnus Solutions. - -Permission is granted to make and distribute verbatim copies of -this manual provided the copyright notice and this permission notice -are preserved on all copies. - -@ignore -Permission is granted to process this file through TeX and print the -results, provided the printed document carries copying permission -notice identical to this one except for the removal of this paragraph - - -@end ignore -Permission is granted to copy and distribute modified versions of this -manual under the conditions for verbatim copying, provided that the entire -resulting derived work is distributed under the terms of a permission -notice identical to this one. - -Permission is granted to copy and distribute translations of this manual -into another language, under the above conditions for modified versions, -except that this permission notice may be stated in a translation approved -by the Foundation. -@end ifinfo - -@titlepage -@title The GNU configure and build system -@author Ian Lance Taylor - -@page -@vskip 0pt plus 1filll -Copyright @copyright{} 1998 Cygnus Solutions - -Permission is granted to make and distribute verbatim copies of -this manual provided the copyright notice and this permission notice -are preserved on all copies. - -Permission is granted to copy and distribute modified versions of this -manual under the conditions for verbatim copying, provided that the entire -resulting derived work is distributed under the terms of a permission -notice identical to this one. - -Permission is granted to copy and distribute translations of this manual -into another language, under the above conditions for modified versions, -except that this permission notice may be stated in a translation -approved by the Free Software Foundation. -@end titlepage - -@ifinfo -@node Top -@top GNU configure and build system - -The GNU configure and build system. - -@menu -* Introduction:: Introduction. -* Getting Started:: Getting Started. -* Files:: Files. -* Configuration Names:: Configuration Names. -* Cross Compilation Tools:: Cross Compilation Tools. -* Canadian Cross:: Canadian Cross. -* Cygnus Configure:: Cygnus Configure. -* Multilibs:: Multilibs. -* FAQ:: Frequently Asked Questions. -* Index:: Index. -@end menu - -@end ifinfo - -@node Introduction -@chapter Introduction - -This document describes the GNU configure and build systems. It -describes how autoconf, automake, libtool, and make fit together. It -also includes a discussion of the older Cygnus configure system. - -This document does not describe in detail how to use each of the tools; -see the respective manuals for that. Instead, it describes which files -the developer must write, which files are machine generated and how they -are generated, and where certain common problems should be addressed. - -@ifnothtml -This document draws on several sources, including the autoconf manual by -David MacKenzie (@pxref{Top, , autoconf overview, autoconf, Autoconf}), -the automake manual by David MacKenzie and Tom Tromey (@pxref{Top, , -automake overview, automake, GNU Automake}), the libtool manual by -Gordon Matzigkeit (@pxref{Top, , libtool overview, libtool, GNU -libtool}), and the Cygnus configure manual by K. Richard Pixley. -@end ifnothtml -@ifhtml -This document draws on several sources, including -@uref{http://www.delorie.com/gnu/docs/autoconf/autoconf_toc.html, the -autoconf manual} by David MacKenzie, -@uref{http://www.delorie.com/gnu/docs/automake/automake_toc.html, the -automake manual} by David MacKenzie and Tom Tromey, -@uref{http://www.delorie.com/gnu/docs/libtool/libtool_toc.html, the -libtool manual} by Gordon Matzigkeit, and the Cygnus configure manual by -K. Richard Pixley. -@end ifhtml - -@menu -* Goals:: Goals. -* Tools:: The tools. -* History:: History. -* Building:: Building. -@end menu - -@node Goals -@section Goals -@cindex goals - -The GNU configure and build system has two main goals. - -The first is to simplify the development of portable programs. The -system permits the developer to concentrate on writing the program, -simplifying many details of portability across Unix and even Windows -systems, and permitting the developer to describe how to build the -program using simple rules rather than complex Makefiles. - -The second is to simplify the building of programs distributed as source -code. All programs are built using a simple, standardized, two step -process. The program builder need not install any special tools in -order to build the program. - -@node Tools -@section Tools - -The GNU configure and build system is comprised of several different -tools. Program developers must build and install all of these tools. - -People who just want to build programs from distributed sources normally -do not need any special tools beyond a Unix shell, a make program, and a -C compiler. - -@table @asis -@item autoconf -provides a general portability framework, based on testing the features -of the host system at build time. -@item automake -a system for describing how to build a program, permitting the developer -to write a simplified @file{Makefile}. -@item libtool -a standardized approach to building shared libraries. -@item gettext -provides a framework for translation of text messages into other -languages; not really discussed in this document. -@item m4 -autoconf requires the GNU version of m4; the standard Unix m4 does not -suffice. -@item perl -automake requires perl. -@end table - -@node History -@section History -@cindex history - -This is a very brief and probably inaccurate history. - -As the number of Unix variants increased during the 1980s, it became -harder to write programs which could run on all variants. While it was -often possible to use @code{#ifdef} to identify particular systems, -developers frequently did not have access to every system, and the -characteristics of some systems changed from version to version. - -By 1992, at least three different approaches had been developed: -@itemize @bullet -@item -The Metaconfig program, by Larry Wall, Harlan Stenn, and Raphael -Manfredi. -@item -The Cygnus configure script, by K. Richard Pixley, and the gcc configure -script, by Richard Stallman. These use essentially the same approach, -and the developers communicated regularly. -@item -The autoconf program, by David MacKenzie. -@end itemize - -The Metaconfig program is still used for Perl and a few other programs. -It is part of the Dist package. I do not know if it is being developed. - -In 1994, David MacKenzie and others modified autoconf to incorporate all -the features of Cygnus configure. Since then, there has been a slow but -steady conversion of GNU programs from Cygnus configure to autoconf. gcc -has been converted, eliminating the gcc configure script. - -GNU autoconf was regularly maintained until late 1996. As of this -writing in June, 1998, it has no public maintainer. - -Most programs are built using the make program, which requires the -developer to write Makefiles describing how to build the programs. -Since most programs are built in pretty much the same way, this led to a -lot of duplication. - -The X Window system is built using the imake tool, which uses a database -of rules to eliminate the duplication. However, building a tool which -was developed using imake requires that the builder have imake -installed, violating one of the goals of the GNU system. - -The new BSD make provides a standard library of Makefile fragments, -which permits developers to write very simple Makefiles. However, this -requires that the builder install the new BSD make program. - -In 1994, David MacKenzie wrote the first version of automake, which -permitted writing a simple build description which was converted into a -Makefile which could be used by the standard make program. In 1995, Tom -Tromey completely rewrote automake in Perl, and he continues to enhance -it. - -Various free packages built libraries, and by around 1995 several -included support to build shared libraries on various platforms. -However, there was no consistent approach. In early 1996, Gordon -Matzigkeit began working on libtool, which provided a standardized -approach to building shared libraries. This was integrated into -automake from the start. - -The development of automake and libtool was driven by the GNITS project, -a group of GNU maintainers who designed standardized tools to help meet -the GNU coding standards. - -@node Building -@section Building - -Most readers of this document should already know how to build a tool by -running @samp{configure} and @samp{make}. This section may serve as a -quick introduction or reminder. - -Building a tool is normally as simple as running @samp{configure} -followed by @samp{make}. You should normally run @samp{configure} from -an empty directory, using some path to refer to the @samp{configure} -script in the source directory. The directory in which you run -@samp{configure} is called the @dfn{object directory}. - -In order to use a object directory which is different from the source -directory, you must be using the GNU version of @samp{make}, which has -the required @samp{VPATH} support. Despite this restriction, using a -different object directory is highly recommended: -@itemize @bullet -@item -It keeps the files generated during the build from cluttering up your -sources. -@item -It permits you to remove the built files by simply removing the entire -build directory. -@item -It permits you to build from the same sources with several sets of -configure options simultaneously. -@end itemize - -If you don't have GNU @samp{make}, you will have to run @samp{configure} -in the source directory. All GNU packages should support this; in -particular, GNU packages should not assume the presence of GNU -@samp{make}. - -After running @samp{configure}, you can build the tools by running -@samp{make}. - -To install the tools, run @samp{make install}. Installing the tools -will copy the programs and any required support files to the -@dfn{installation directory}. The location of the installation -directory is controlled by @samp{configure} options, as described below. - -In the Cygnus tree at present, the info files are built and installed as -a separate step. To build them, run @samp{make info}. To install them, -run @samp{make install-info}. - -All @samp{configure} scripts support a wide variety of options. The -most interesting ones are @samp{--with} and @samp{--enable} options -which are generally specific to particular tools. You can usually use -the @samp{--help} option to get a list of interesting options for a -particular configure script. - -The only generic options you are likely to use are the @samp{--prefix} -and @samp{--exec-prefix} options. These options are used to specify the -installation directory. - -The directory named by the @samp{--prefix} option will hold machine -independent files such as info files. - -The directory named by the @samp{--exec-prefix} option, which is -normally a subdirectory of the @samp{--prefix} directory, will hold -machine dependent files such as executables. - -The default for @samp{--prefix} is @file{/usr/local}. The default for -@samp{--exec-prefix} is the value used for @samp{--prefix}. - -The convention used in Cygnus releases is to use a @samp{--prefix} -option of @file{/usr/cygnus/@var{release}}, where @var{release} is the -name of the release, and to use a @samp{--exec-prefix} option of -@file{/usr/cygnus/@var{release}/H-@var{host}}, where @var{host} is the -configuration name of the host system (@pxref{Configuration Names}). - -Do not use either the source or the object directory as the installation -directory. That will just lead to confusion. - -@node Getting Started -@chapter Getting Started - -To start using the GNU configure and build system with your software -package, you must write three files, and you must run some tools to -manually generate additional files. - -@menu -* Write configure.in:: Write configure.in. -* Write Makefile.am:: Write Makefile.am. -* Write acconfig.h:: Write acconfig.h. -* Generate files:: Generate files. -* Getting Started Example:: Example. -@end menu - -@node Write configure.in -@section Write configure.in -@cindex @file{configure.in}, writing - -You must first write the file @file{configure.in}. This is an autoconf -input file, and the autoconf manual describes in detail what this file -should look like. - -You will write tests in your @file{configure.in} file to check for -conditions that may change from one system to another, such as the -presence of particular header files or functions. - -For example, not all systems support the @samp{gettimeofday} function. -If you want to use the @samp{gettimeofday} function when it is -available, and to use some other function when it is not, you would -check for this by putting @samp{AC_CHECK_FUNCS(gettimeofday)} in -@file{configure.in}. - -When the configure script is run at build time, this will arrange to -define the preprocessor macro @samp{HAVE_GETTIMEOFDAY} to the value 1 if -the @samp{gettimeofday} function is available, and to not define the -macro at all if the function is not available. Your code can then use -@samp{#ifdef} to test whether it is safe to call @samp{gettimeofday}. - -If you have an existing body of code, the @samp{autoscan} program may -help identify potential portability problems, and hence configure tests -that you will want to use. -@ifnothtml -@xref{Invoking autoscan, , , autoconf, the autoconf manual}. -@end ifnothtml -@ifhtml -See @uref{http://www.delorie.com/gnu/docs/autoconf/autoconf_4.html, the -autoscan documentation}. -@end ifhtml - -Another handy tool for an existing body of code is @samp{ifnames}. This -will show you all the preprocessor conditionals that the code already -uses. -@ifnothtml -@xref{Invoking ifnames, , , autoconf, the autoconf manual}. -@end ifnothtml -@ifhtml -See @uref{http://www.delorie.com/gnu/docs/autoconf/autoconf_5.html, the -ifnames documentation}. -@end ifhtml - -Besides the portability tests which are specific to your particular -package, every @file{configure.in} file should contain the following -macros. - -@table @samp -@item AC_INIT -@cindex @samp{AC_INIT} -This macro takes a single argument, which is the name of a file in your -package. For example, @samp{AC_INIT(foo.c)}. - -@item AC_PREREQ(@var{VERSION}) -@cindex @samp{AC_PREREQ} -This macro is optional. It may be used to indicate the version of -@samp{autoconf} that you are using. This will prevent users from -running an earlier version of @samp{autoconf} and perhaps getting an -invalid @file{configure} script. For example, @samp{AC_PREREQ(2.12)}. - -@item AM_INIT_AUTOMAKE -@cindex @samp{AM_INIT_AUTOMAKE} -This macro takes two arguments: the name of the package, and a version -number. For example, @samp{AM_INIT_AUTOMAKE(foo, 1.0)}. (This macro is -not needed if you are not using automake). - -@item AM_CONFIG_HEADER -@cindex @samp{AM_CONFIG_HEADER} -This macro names the header file which will hold the preprocessor macro -definitions at run time. Normally this should be @file{config.h}. Your -sources would then use @samp{#include "config.h"} to include it. - -This macro may optionally name the input file for that header file; by -default, this is @file{config.h.in}, but that file name works poorly on -DOS filesystems. Therefore, it is often better to name it explicitly as -@file{config.in}. - -This is what you should normally put in @file{configure.in}: -@example -AM_CONFIG_HEADER(config.h:config.in) -@end example - -@cindex @samp{AC_CONFIG_HEADER} -(If you are not using automake, use @samp{AC_CONFIG_HEADER} rather than -@samp{AM_CONFIG_HEADER}). - -@item AM_MAINTAINER_MODE -@cindex @samp{AM_MAINTAINER_MODE} -This macro always appears in Cygnus configure scripts. Other programs -may or may not use it. - -If this macro is used, the @samp{--enable-maintainer-mode} option is -required to enable automatic rebuilding of generated files used by the -configure system. This of course requires that developers be aware of, -and use, that option. - -If this macro is not used, then the generated files will always be -rebuilt automatically. This will cause problems if the wrong versions -of autoconf, automake, or others are in the builder's @samp{PATH}. - -(If you are not using automake, you do not need to use this macro). - -@item AC_EXEEXT -@cindex @samp{AC_EXEEXT} -@cindex @samp{AM_EXEEXT} -Either this macro or @samp{AM_EXEEXT} always appears in Cygnus configure -files. Other programs may or may not use one of them. - -This macro looks for the executable suffix used on the host system. On -Unix systems, this is the empty string. On Windows systems, this is -@samp{.exe}. This macro directs automake to use the executable suffix -as appropriate when creating programs. This macro does not take any -arguments. - -The @samp{AC_EXEEXT} form is new, and is part of a Cygnus patch to -autoconf to support compiling with Visual C++. Older programs use -@samp{AM_EXEEXT} instead. - -(Programs which do not use automake use neither @samp{AC_EXEEXT} nor -@samp{AM_EXEEXT}). - -@item AC_PROG_CC -@cindex @samp{AC_PROG_CC} -If you are writing C code, you will normally want to use this macro. It -locates the C compiler to use. It does not take any arguments. - -However, if this @file{configure.in} file is for a library which is to -be compiled by a cross compiler which may not fully work, then you will -not want to use @samp{AC_PROG_CC}. Instead, you will want to use a -variant which does not call the macro @samp{AC_PROG_CC_WORKS}. Examples -can be found in various @file{configure.in} files for libraries that are -compiled with cross compilers, such as libiberty or libgloss. This is -essentially a bug in autoconf, and there will probably be a better -workaround at some point. - -@item AC_PROG_CXX -@cindex @samp{AC_PROG_CXX} -If you are writing C++ code, you will want to use this macro. It -locates the C++ compiler to use. It does not take any arguments. The -same cross compiler comments apply as for @samp{AC_PROG_CC}. - -@item AM_PROG_LIBTOOL -@cindex @samp{AM_PROG_LIBTOOL} -If you want to build libraries, and you want to permit them to be -shared, or you want to link against libraries which were built using -libtool, then you will need this macro. This macro is required in order -to use libtool. - -@cindex @samp{AM_DISABLE_SHARED} -By default, this will cause all libraries to be built as shared -libraries. To prevent this--to change the default--use -@samp{AM_DISABLE_SHARED} before @samp{AM_PROG_LIBTOOL}. The configure -options @samp{--enable-shared} and @samp{--disable-shared} may be used -to override the default at build time. - -@item AC_DEFINE(_GNU_SOURCE) -@cindex @samp{_GNU_SOURCE} -GNU packages should normally include this line before any other feature -tests. This defines the macro @samp{_GNU_SOURCE} when compiling, which -directs the libc header files to provide the standard GNU system -interfaces including all GNU extensions. If this macro is not defined, -certain GNU extensions may not be available. - -@item AC_OUTPUT -@cindex @samp{AC_OUTPUT} -This macro takes a list of file names which the configure process should -produce. This is normally a list of one or more @file{Makefile} files -in different directories. If your package lives entirely in a single -directory, you would use simply @samp{AC_OUTPUT(Makefile)}. If you also -have, for example, a @file{lib} subdirectory, you would use -@samp{AC_OUTPUT(Makefile lib/Makefile)}. -@end table - -If you want to use locally defined macros in your @file{configure.in} -file, then you will need to write a @file{acinclude.m4} file which -defines them (if not using automake, this file is called -@file{aclocal.m4}). Alternatively, you can put separate macros in an -@file{m4} subdirectory, and put @samp{ACLOCAL_AMFLAGS = -I m4} in your -@file{Makefile.am} file so that the @samp{aclocal} program will be able -to find them. - -The different macro prefixes indicate which tool defines the macro. -Macros which start with @samp{AC_} are part of autoconf. Macros which -start with @samp{AM_} are provided by automake or libtool. - -@node Write Makefile.am -@section Write Makefile.am -@cindex @file{Makefile.am}, writing - -You must write the file @file{Makefile.am}. This is an automake input -file, and the automake manual describes in detail what this file should -look like. - -The automake commands in @file{Makefile.am} mostly look like variable -assignments in a @file{Makefile}. automake recognizes special variable -names, and automatically add make rules to the output as needed. - -There will be one @file{Makefile.am} file for each directory in your -package. For each directory with subdirectories, the @file{Makefile.am} -file should contain the line -@smallexample -SUBDIRS = @var{dir} @var{dir} @dots{} -@end smallexample -@noindent -where each @var{dir} is the name of a subdirectory. - -For each @file{Makefile.am}, there should be a corresponding -@file{Makefile} in the @samp{AC_OUTPUT} macro in @file{configure.in}. - -Every @file{Makefile.am} written at Cygnus should contain the line -@smallexample -AUTOMAKE_OPTIONS = cygnus -@end smallexample -@noindent -This puts automake into Cygnus mode. See the automake manual for -details. - -You may to include the version number of @samp{automake} that you are -using on the @samp{AUTOMAKE_OPTIONS} line. For example, -@smallexample -AUTOMAKE_OPTIONS = cygnus 1.3 -@end smallexample -@noindent -This will prevent users from running an earlier version of -@samp{automake} and perhaps getting an invalid @file{Makefile.in}. - -If your package builds a program, then in the directory where that -program is built you will normally want a line like -@smallexample -bin_PROGRAMS = @var{program} -@end smallexample -@noindent -where @var{program} is the name of the program. You will then want a -line like -@smallexample -@var{program}_SOURCES = @var{file} @var{file} @dots{} -@end smallexample -@noindent -where each @var{file} is the name of a source file to link into the -program (e.g., @samp{foo.c}). - -If your package builds a library, and you do not want the library to -ever be built as a shared library, then in the directory where that -library is built you will normally want a line like -@smallexample -lib_LIBRARIES = lib@var{name}.a -@end smallexample -@noindent -where @samp{lib@var{name}.a} is the name of the library. You will then -want a line like -@smallexample -lib@var{name}_a_SOURCES = @var{file} @var{file} @dots{} -@end smallexample -@noindent -where each @var{file} is the name of a source file to add to the -library. - -If your package builds a library, and you want to permit building the -library as a shared library, then in the directory where that library is -built you will normally want a line like -@smallexample -lib_LTLIBRARIES = lib@var{name}.la -@end smallexample -The use of @samp{LTLIBRARIES}, and the @samp{.la} extension, indicate a -library to be built using libtool. As usual, you will then want a line -like -@smallexample -lib@var{name}_la_SOURCES = @var{file} @var{file} @dots{} -@end smallexample - -The strings @samp{bin} and @samp{lib} that appear above in -@samp{bin_PROGRAMS} and @samp{lib_LIBRARIES} are not arbitrary. They -refer to particular directories, which may be set by the @samp{--bindir} -and @samp{--libdir} options to @file{configure}. If those options are -not used, the default values are based on the @samp{--prefix} or -@samp{--exec-prefix} options to @file{configure}. It is possible to use -other names if the program or library should be installed in some other -directory. - -The @file{Makefile.am} file may also contain almost anything that may -appear in a normal @file{Makefile}. automake also supports many other -special variables, as well as conditionals. - -See the automake manual for more information. - -@node Write acconfig.h -@section Write acconfig.h -@cindex @file{acconfig.h}, writing - -If you are generating a portability header file, (i.e., you are using -@samp{AM_CONFIG_HEADER} in @file{configure.in}), then you will have to -write a @file{acconfig.h} file. It will have to contain the following -lines. - -@smallexample -/* Name of package. */ -#undef PACKAGE - -/* Version of package. */ -#undef VERSION -@end smallexample - -This requirement is really a bug in the system, and the requirement may -be eliminated at some later date. - -The @file{acconfig.h} file will also similar comment and @samp{#undef} -lines for any unusual macros in the @file{configure.in} file, including -any macro which appears in a @samp{AC_DEFINE} macro. - -In particular, if you are writing a GNU package and therefore include -@samp{AC_DEFINE(_GNU_SOURCE)} in @file{configure.in} as suggested above, -you will need lines like this in @file{acconfig.h}: -@smallexample -/* Enable GNU extensions. */ -#undef _GNU_SOURCE -@end smallexample - -Normally the @samp{autoheader} program will inform you of any such -requirements by printing an error message when it is run. However, if -you do anything particular odd in your @file{configure.in} file, you -will have to make sure that the right entries appear in -@file{acconfig.h}, since otherwise the results of the tests may not be -available in the @file{config.h} file which your code will use. - -(Thee @samp{PACKAGE} and @samp{VERSION} lines are not required if you -are not using automake, and in that case you may not need a -@file{acconfig.h} file at all). - -@node Generate files -@section Generate files - -Once you have written @file{configure.in}, @file{Makefile.am}, -@file{acconfig.h}, and possibly @file{acinclude.m4}, you must use -autoconf and automake programs to produce the first versions of the -generated files. This is done by executing the following sequence of -commands. - -@smallexample -aclocal -autoconf -autoheader -automake -@end smallexample - -The @samp{aclocal} and @samp{automake} commands are part of the automake -package, and the @samp{autoconf} and @samp{autoheader} commands are part -of the autoconf package. - -If you are using a @file{m4} subdirectory for your macros, you will need -to use the @samp{-I m4} option when you run @samp{aclocal}. - -If you are not using the Cygnus tree, use the @samp{-a} option when -running @samp{automake} command in order to copy the required support -files into your source directory. - -If you are using libtool, you must build and install the libtool package -with the same @samp{--prefix} and @samp{--exec-prefix} options as you -used with the autoconf and automake packages. You must do this before -running any of the above commands. If you are not using the Cygnus -tree, you will need to run the @samp{libtoolize} program to copy the -libtool support files into your directory. - -Once you have managed to run these commands without getting any errors, -you should create a new empty directory, and run the @samp{configure} -script which will have been created by @samp{autoconf} with the -@samp{--enable-maintainer-mode} option. This will give you a set of -Makefiles which will include rules to automatically rebuild all the -generated files. - -After doing that, whenever you have changed some of the input files and -want to regenerated the other files, go to your object directory and run -@samp{make}. Doing this is more reliable than trying to rebuild the -files manually, because there are complex order dependencies and it is -easy to forget something. - -@node Getting Started Example -@section Example - -Let's consider a trivial example. - -Suppose we want to write a simple version of @samp{touch}. Our program, -which we will call @samp{poke}, will take a single file name argument, -and use the @samp{utime} system call to set the modification and access -times of the file to the current time. We want this program to be -highly portable. - -We'll first see what this looks like without using autoconf and -automake, and then see what it looks like with them. - -@menu -* Getting Started Example 1:: First Try. -* Getting Started Example 2:: Second Try. -* Getting Started Example 3:: Third Try. -* Generate Files in Example:: Generate Files. -@end menu - -@node Getting Started Example 1 -@subsection First Try - -Here is our first try at @samp{poke.c}. Note that we've written it -without ANSI/ISO C prototypes, since we want it to be highly portable. - -@example -#include <stdio.h> -#include <stdlib.h> -#include <sys/types.h> -#include <utime.h> - -int -main (argc, argv) - int argc; - char **argv; -@{ - if (argc != 2) - @{ - fprintf (stderr, "Usage: poke file\n"); - exit (1); - @} - - if (utime (argv[1], NULL) < 0) - @{ - perror ("utime"); - exit (1); - @} - - exit (0); -@} -@end example - -We also write a simple @file{Makefile}. - -@example -CC = gcc -CFLAGS = -g -O2 - -all: poke - -poke: poke.o - $(CC) -o poke $(CFLAGS) $(LDFLAGS) poke.o -@end example - -So far, so good. - -Unfortunately, there are a few problems. - -On older Unix systems derived from BSD 4.3, the @samp{utime} system call -does not accept a second argument of @samp{NULL}. On those systems, we -need to pass a pointer to @samp{struct utimbuf} structure. -Unfortunately, even older systems don't define that structure; on those -systems, we need to pass an array of two @samp{long} values. - -The header file @file{stdlib.h} was invented by ANSI C, and older -systems don't have a copy. We included it above to get a declaration of -@samp{exit}. - -We can find some of these portability problems by running -@samp{autoscan}, which will create a @file{configure.scan} file which we -can use as a prototype for our @file{configure.in} file. I won't show -the output, but it will notice the potential problems with @samp{utime} -and @file{stdlib.h}. - -In our @file{Makefile}, we don't provide any way to install the program. -This doesn't matter much for such a simple example, but a real program -will need an @samp{install} target. For that matter, we will also want -a @samp{clean} target. - -@node Getting Started Example 2 -@subsection Second Try - -Here is our second try at this program. - -We modify @file{poke.c} to use preprocessor macros to control what -features are available. (I've cheated a bit by using the same macro -names which autoconf will use). - -@example -#include <stdio.h> - -#ifdef STDC_HEADERS -#include <stdlib.h> -#endif - -#include <sys/types.h> - -#ifdef HAVE_UTIME_H -#include <utime.h> -#endif - -#ifndef HAVE_UTIME_NULL - -#include <time.h> - -#ifndef HAVE_STRUCT_UTIMBUF - -struct utimbuf -@{ - long actime; - long modtime; -@}; - -#endif - -static int -utime_now (file) - char *file; -@{ - struct utimbuf now; - - now.actime = now.modtime = time (NULL); - return utime (file, &now); -@} - -#define utime(f, p) utime_now (f) - -#endif /* HAVE_UTIME_NULL */ - -int -main (argc, argv) - int argc; - char **argv; -@{ - if (argc != 2) - @{ - fprintf (stderr, "Usage: poke file\n"); - exit (1); - @} - - if (utime (argv[1], NULL) < 0) - @{ - perror ("utime"); - exit (1); - @} - - exit (0); -@} -@end example - -Here is the associated @file{Makefile}. We've added support for the -preprocessor flags we use. We've also added @samp{install} and -@samp{clean} targets. - -@example -# Set this to your installation directory. -bindir = /usr/local/bin - -# Uncomment this if you have the standard ANSI/ISO C header files. -# STDC_HDRS = -DSTDC_HEADERS - -# Uncomment this if you have utime.h. -# UTIME_H = -DHAVE_UTIME_H - -# Uncomment this if utime (FILE, NULL) works on your system. -# UTIME_NULL = -DHAVE_UTIME_NULL - -# Uncomment this if struct utimbuf is defined in utime.h. -# UTIMBUF = -DHAVE_STRUCT_UTIMBUF - -CC = gcc -CFLAGS = -g -O2 - -ALL_CFLAGS = $(STDC_HDRS) $(UTIME_H) $(UTIME_NULL) $(UTIMBUF) $(CFLAGS) - -all: poke - -poke: poke.o - $(CC) -o poke $(ALL_CFLAGS) $(LDFLAGS) poke.o - -.c.o: - $(CC) -c $(ALL_CFLAGS) poke.c - -install: poke - cp poke $(bindir)/poke - -clean: - rm poke poke.o -@end example - -Some problems with this approach should be clear. - -Users who want to compile poke will have to know how @samp{utime} works -on their systems, so that they can uncomment the @file{Makefile} -correctly. - -The installation is done using @samp{cp}, but many systems have an -@samp{install} program which may be used, and which supports optional -features such as stripping debugging information out of the installed -binary. - -The use of @file{Makefile} variables like @samp{CC}, @samp{CFLAGS} and -@samp{LDFLAGS} follows the requirements of the GNU standards. This is -convenient for all packages, since it reduces surprises for users. -However, it is easy to get the details wrong, and wind up with a -slightly nonstandard distribution. - -@node Getting Started Example 3 -@subsection Third Try - -For our third try at this program, we will write a @file{configure.in} -script to discover the configuration features on the host system, rather -than requiring the user to edit the @file{Makefile}. We will also write -a @file{Makefile.am} rather than a @file{Makefile}. - -The only change to @file{poke.c} is to add a line at the start of the -file: -@smallexample -#include "config.h" -@end smallexample - -The new @file{configure.in} file is as follows. - -@example -AC_INIT(poke.c) -AM_INIT_AUTOMAKE(poke, 1.0) -AM_CONFIG_HEADER(config.h:config.in) -AC_PROG_CC -AC_HEADER_STDC -AC_CHECK_HEADERS(utime.h) -AC_EGREP_HEADER(utimbuf, utime.h, AC_DEFINE(HAVE_STRUCT_UTIMBUF)) -AC_FUNC_UTIME_NULL -AC_OUTPUT(Makefile) -@end example - -The first four macros in this file, and the last one, were described -above; see @ref{Write configure.in}. If we omit these macros, then when -we run @samp{automake} we will get a reminder that we need them. - -The other macros are standard autoconf macros. - -@table @samp -@item AC_HEADER_STDC -Check for standard C headers. -@item AC_CHECK_HEADERS -Check whether a particular header file exists. -@item AC_EGREP_HEADER -Check for a particular string in a particular header file, in this case -checking for @samp{utimbuf} in @file{utime.h}. -@item AC_FUNC_UTIME_NULL -Check whether @samp{utime} accepts a NULL second argument to set the -file change time to the current time. -@end table - -See the autoconf manual for a more complete description. - -The new @file{Makefile.am} file is as follows. Note how simple this is -compared to our earlier @file{Makefile}. - -@example -bin_PROGRAMS = poke - -poke_SOURCES = poke.c -@end example - -This means that we should build a single program name @samp{poke}. It -should be installed in the binary directory, which we called -@samp{bindir} earlier. The program @samp{poke} is built from the source -file @file{poke.c}. - -We must also write a @file{acconfig.h} file. Besides @samp{PACKAGE} and -@samp{VERSION}, which must be mentioned for all packages which use -automake, we must include @samp{HAVE_STRUCT_UTIMBUF}, since we mentioned -it in an @samp{AC_DEFINE}. - -@example -/* Name of package. */ -#undef PACKAGE - -/* Version of package. */ -#undef VERSION - -/* Whether utime.h defines struct utimbuf. */ -#undef HAVE_STRUCT_UTIMBUF -@end example - -@node Generate Files in Example -@subsection Generate Files - -We must now generate the other files, using the following commands. - -@smallexample -aclocal -autoconf -autoheader -automake -@end smallexample - -When we run @samp{autoheader}, it will remind us of any macros we forgot -to add to @file{acconfig.h}. - -When we run @samp{automake}, it will want to add some files to our -distribution. It will add them automatically if we use the -@samp{--add-missing} option. - -By default, @samp{automake} will run in GNU mode, which means that it -will want us to create certain additional files; as of this writing, it -will want @file{NEWS}, @file{README}, @file{AUTHORS}, and -@file{ChangeLog}, all of which are files which should appear in a -standard GNU distribution. We can either add those files, or run -@samp{automake} with the @samp{--foreign} option. - -Running these tools will generate the following files, all of which are -described in the next chapter. - -@itemize @bullet -@item -@file{aclocal.m4} -@item -@file{configure} -@item -@file{config.in} -@item -@file{Makefile.in} -@item -@file{stamp-h.in} -@end itemize - -@node Files -@chapter Files - -As was seen in the previous chapter, the GNU configure and build system -uses a number of different files. The developer must write a few files. -The others are generated by various tools. - -The system is rather flexible, and can be used in many different ways. -In describing the files that it uses, I will describe the common case, -and mention some other cases that may arise. - -@menu -* Developer Files:: Developer Files. -* Build Files:: Build Files. -* Support Files:: Support Files. -@end menu - -@node Developer Files -@section Developer Files - -This section describes the files written or generated by the developer -of a package. - -@menu -* Developer Files Picture:: Developer Files Picture. -* Written Developer Files:: Written Developer Files. -* Generated Developer Files:: Generated Developer Files. -@end menu - -@node Developer Files Picture -@subsection Developer Files Picture - -Here is a picture of the files which are written by the developer, the -generated files which would be included with a complete source -distribution, and the tools which create those files. -@ifinfo -The file names are plain text and the tool names are enclosed by -@samp{*} characters -@end ifinfo -@ifnotinfo -The file names are in rectangles with square corners and the tool names -are in rectangles with rounded corners -@end ifnotinfo -(e.g., @samp{autoheader} is the name of a tool, not the name of a file). - -@image{configdev} - -@node Written Developer Files -@subsection Written Developer Files - -The following files would be written by the developer. - -@table @file -@item configure.in -@cindex @file{configure.in} -This is the configuration script. This script contains invocations of -autoconf macros. It may also contain ordinary shell script code. This -file will contain feature tests for portability issues. The last thing -in the file will normally be an @samp{AC_OUTPUT} macro listing which -files to create when the builder runs the configure script. This file -is always required when using the GNU configure system. @xref{Write -configure.in}. - -@item Makefile.am -@cindex @file{Makefile.am} -This is the automake input file. It describes how the code should be -built. It consists of definitions of automake variables. It may also -contain ordinary Makefile targets. This file is only needed when using -automake (newer tools normally use automake, but there are still older -tools which have not been converted, in which the developer writes -@file{Makefile.in} directly). @xref{Write Makefile.am}. - -@item acconfig.h -@cindex @file{acconfig.h} -When the configure script creates a portability header file, by using -@samp{AM_CONFIG_HEADER} (or, if not using automake, -@samp{AC_CONFIG_HEADER}), this file is used to describe macros which are -not recognized by the @samp{autoheader} command. This is normally a -fairly uninteresting file, consisting of a collection of @samp{#undef} -lines with comments. Normally any call to @samp{AC_DEFINE} in -@file{configure.in} will require a line in this file. @xref{Write -acconfig.h}. - -@item acinclude.m4 -@cindex @file{acinclude.m4} -This file is not always required. It defines local autoconf macros. -These macros may then be used in @file{configure.in}. If you don't need -any local autoconf macros, then you don't need this file at all. In -fact, in general, you never need local autoconf macros, since you can -put everything in @file{configure.in}, but sometimes a local macro is -convenient. - -Newer tools may omit @file{acinclude.m4}, and instead use a -subdirectory, typically named @file{m4}, and define -@samp{ACLOCAL_AMFLAGS = -I m4} in @file{Makefile.am} to force -@samp{aclocal} to look there for macro definitions. The macro -definitions are then placed in separate files in that directory. - -The @file{acinclude.m4} file is only used when using automake; in older -tools, the developer writes @file{aclocal.m4} directly, if it is needed. -@end table - -@node Generated Developer Files -@subsection Generated Developer Files - -The following files would be generated by the developer. - -When using automake, these files are normally not generated manually -after the first time. Instead, the generated @file{Makefile} contains -rules to automatically rebuild the files as required. When -@samp{AM_MAINTAINER_MODE} is used in @file{configure.in} (the normal -case in Cygnus code), the automatic rebuilding rules will only be -defined if you configure using the @samp{--enable-maintainer-mode} -option. - -When using automatic rebuilding, it is important to ensure that all the -various tools have been built and installed on your @samp{PATH}. Using -automatic rebuilding is highly recommended, so much so that I'm not -going to explain what you have to do if you don't use it. - -@table @file -@item configure -@cindex @file{configure} -This is the configure script which will be run when building the -package. This is generated by @samp{autoconf} from @file{configure.in} -and @file{aclocal.m4}. This is a shell script. - -@item Makefile.in -@cindex @file{Makefile.in} -This is the file which the configure script will turn into the -@file{Makefile} at build time. This file is generated by -@samp{automake} from @file{Makefile.am}. If you aren't using automake, -you must write this file yourself. This file is pretty much a normal -@file{Makefile}, with some configure substitutions for certain -variables. - -@item aclocal.m4 -@cindex @file{aclocal.m4} -This file is created by the @samp{aclocal} program, based on the -contents of @file{configure.in} and @file{acinclude.m4} (or, as noted in -the description of @file{acinclude.m4} above, on the contents of an -@file{m4} subdirectory). This file contains definitions of autoconf -macros which @samp{autoconf} will use when generating the file -@file{configure}. These autoconf macros may be defined by you in -@file{acinclude.m4} or they may be defined by other packages such as -automake, libtool or gettext. If you aren't using automake, you will -normally write this file yourself; in that case, if @file{configure.in} -uses only standard autoconf macros, this file will not be needed at all. - -@item config.in -@cindex @file{config.in} -@cindex @file{config.h.in} -This file is created by @samp{autoheader} based on @file{acconfig.h} and -@file{configure.in}. At build time, the configure script will define -some of the macros in it to create @file{config.h}, which may then be -included by your program. This permits your C code to use preprocessor -conditionals to change its behaviour based on the characteristics of the -host system. This file may also be called @file{config.h.in}. - -@item stamp.h-in -@cindex @file{stamp-h.in} -This rather uninteresting file, which I omitted from the picture, is -generated by @samp{automake}. It always contains the string -@samp{timestamp}. It is used as a timestamp file indicating whether -@file{config.in} is up to date. Using a timestamp file means that -@file{config.in} can be marked as up to date without actually changing -its modification time. This is useful since @file{config.in} depends -upon @file{configure.in}, but it is easy to change @file{configure.in} -in a way which does not affect @file{config.in}. -@end table - -@node Build Files -@section Build Files - -This section describes the files which are created at configure and -build time. These are the files which somebody who builds the package -will see. - -Of course, the developer will also build the package. The distinction -between developer files and build files is not that the developer does -not see the build files, but that somebody who only builds the package -does not have to worry about the developer files. - -@menu -* Build Files Picture:: Build Files Picture. -* Build Files Description:: Build Files Description. -@end menu - -@node Build Files Picture -@subsection Build Files Picture - -Here is a picture of the files which will be created at build time. -@file{config.status} is both a created file and a shell script which is -run to create other files, and the picture attempts to show that. - -@image{configbuild} - -@node Build Files Description -@subsection Build Files Description - -This is a description of the files which are created at build time. - -@table @file -@item config.status -@cindex @file{config.status} -The first step in building a package is to run the @file{configure} -script. The @file{configure} script will create the file -@file{config.status}, which is itself a shell script. When you first -run @file{configure}, it will automatically run @file{config.status}. -An @file{Makefile} derived from an automake generated @file{Makefile.in} -will contain rules to automatically run @file{config.status} again when -necessary to recreate certain files if their inputs change. - -@item Makefile -@cindex @file{Makefile} -This is the file which make will read to build the program. The -@file{config.status} script will transform @file{Makefile.in} into -@file{Makefile}. - -@item config.h -@cindex @file{config.h} -This file defines C preprocessor macros which C code can use to adjust -its behaviour on different systems. The @file{config.status} script -will transform @file{config.in} into @file{config.h}. - -@item config.cache -@cindex @file{config.cache} -This file did not fit neatly into the picture, and I omitted it. It is -used by the @file{configure} script to cache results between runs. This -can be an important speedup. If you modify @file{configure.in} in such -a way that the results of old tests should change (perhaps you have -added a new library to @samp{LDFLAGS}), then you will have to remove -@file{config.cache} to force the tests to be rerun. - -The autoconf manual explains how to set up a site specific cache file. -This can speed up running @file{configure} scripts on your system. - -@item stamp.h -@cindex @file{stamp-h} -This file, which I omitted from the picture, is similar to -@file{stamp-h.in}. It is used as a timestamp file indicating whether -@file{config.h} is up to date. This is useful since @file{config.h} -depends upon @file{config.status}, but it is easy for -@file{config.status} to change in a way which does not affect -@file{config.h}. -@end table - -@node Support Files -@section Support Files - -The GNU configure and build system requires several support files to be -included with your distribution. You do not normally need to concern -yourself with these. If you are using the Cygnus tree, most are already -present. Otherwise, they will be installed with your source by -@samp{automake} (with the @samp{--add-missing} option) and -@samp{libtoolize}. - -You don't have to put the support files in the top level directory. You -can put them in a subdirectory, and use the @samp{AC_CONFIG_AUX_DIR} -macro in @file{configure.in} to tell @samp{automake} and the -@file{configure} script where they are. - -In this section, I describe the support files, so that you can know what -they are and why they are there. - -@table @file -@item ABOUT-NLS -Added by automake if you are using gettext. This is a documentation -file about the gettext project. -@item ansi2knr.c -Used by an automake generated @file{Makefile} if you put @samp{ansi2knr} -in @samp{AUTOMAKE_OPTIONS} in @file{Makefile.am}. This permits -compiling ANSI C code with a K&R C compiler. -@item ansi2knr.1 -The man page which goes with @file{ansi2knr.c}. -@item config.guess -A shell script which determines the configuration name for the system on -which it is run. -@item config.sub -A shell script which canonicalizes a configuration name entered by a -user. -@item elisp-comp -Used to compile Emacs LISP files. -@item install-sh -A shell script which installs a program. This is used if the configure -script can not find an install binary. -@item ltconfig -Used by libtool. This is a shell script which configures libtool for -the particular system on which it is used. -@item ltmain.sh -Used by libtool. This is the actual libtool script which is used, after -it is configured by @file{ltconfig} to build a library. -@item mdate-sh -A shell script used by an automake generated @file{Makefile} to pretty -print the modification time of a file. This is used to maintain version -numbers for texinfo files. -@item missing -A shell script used if some tool is missing entirely. This is used by -an automake generated @file{Makefile} to avoid certain sorts of -timestamp problems. -@item mkinstalldirs -A shell script which creates a directory, including all parent -directories. This is used by an automake generated @file{Makefile} -during installation. -@item texinfo.tex -Required if you have any texinfo files. This is used when converting -Texinfo files into DVI using @samp{texi2dvi} and @TeX{}. -@item ylwrap -A shell script used by an automake generated @file{Makefile} to run -programs like @samp{bison}, @samp{yacc}, @samp{flex}, and @samp{lex}. -These programs default to producing output files with a fixed name, and -the @file{ylwrap} script runs them in a subdirectory to avoid file name -conflicts when using a parallel make program. -@end table - -@node Configuration Names -@chapter Configuration Names -@cindex configuration names -@cindex configuration triplets -@cindex triplets -@cindex host names -@cindex host triplets -@cindex canonical system names -@cindex system names -@cindex system types - -The GNU configure system names all systems using a @dfn{configuration -name}. All such names used to be triplets (they may now contain four -parts in certain cases), and the term @dfn{configuration triplet} is -still seen. - -@menu -* Configuration Name Definition:: Configuration Name Definition. -* Using Configuration Names:: Using Configuration Names. -@end menu - -@node Configuration Name Definition -@section Configuration Name Definition - -This is a string of the form -@var{cpu}-@var{manufacturer}-@var{operating_system}. In some cases, -this is extended to a four part form: -@var{cpu}-@var{manufacturer}-@var{kernel}-@var{operating_system}. - -When using a configuration name in a configure option, it is normally -not necessary to specify an entire name. In particular, the -@var{manufacturer} field is often omitted, leading to strings such as -@samp{i386-linux} or @samp{sparc-sunos}. The shell script -@file{config.sub} will translate these shortened strings into the -canonical form. autoconf will arrange for @file{config.sub} to be run -automatically when it is needed. - -The fields of a configuration name are as follows: - -@table @var -@item cpu -The type of processor. This is typically something like @samp{i386} or -@samp{sparc}. More specific variants are used as well, such as -@samp{mipsel} to indicate a little endian MIPS processor. -@item manufacturer -A somewhat freeform field which indicates the manufacturer of the -system. This is often simply @samp{unknown}. Other common strings are -@samp{pc} for an IBM PC compatible system, or the name of a workstation -vendor, such as @samp{sun}. -@item operating_system -The name of the operating system which is run on the system. This will -be something like @samp{solaris2.5} or @samp{irix6.3}. There is no -particular restriction on the version number, and strings like -@samp{aix4.1.4.0} are seen. For an embedded system, which has no -operating system, this field normally indicates the type of object file -format, such as @samp{elf} or @samp{coff}. -@item kernel -This is used mainly for GNU/Linux. A typical GNU/Linux configuration -name is @samp{i586-pc-linux-gnulibc1}. In this case the kernel, -@samp{linux}, is separated from the operating system, @samp{gnulibc1}. -@end table - -The shell script @file{config.guess} will normally print the correct -configuration name for the system on which it is run. It does by -running @samp{uname} and by examining other characteristics of the -system. - -Because @file{config.guess} can normally determine the configuration -name for a machine, it is normally only necessary to specify a -configuration name when building a cross-compiler or when building using -a cross-compiler. - -@node Using Configuration Names -@section Using Configuration Names - -A configure script will sometimes have to make a decision based on a -configuration name. You will need to do this if you have to compile -code differently based on something which can not be tested using a -standard autoconf feature test. - -It is normally better to test for particular features, rather than to -test for a particular system. This is because as Unix evolves, -different systems copy features from one another. Even if you need to -determine whether the feature is supported based on a configuration -name, you should define a macro which describes the feature, rather than -defining a macro which describes the particular system you are on. - -Testing for a particular system is normally done using a case statement -in @file{configure.in}. The case statement might look something like -the following, assuming that @samp{host} is a shell variable holding a -canonical configuration name (which will be the case if -@file{configure.in} uses the @samp{AC_CANONICAL_HOST} or -@samp{AC_CANONICAL_SYSTEM} macro). - -@smallexample -case "$@{host@}" in -i[3456]86-*-linux-gnu*) do something ;; -sparc*-sun-solaris2.[56789]*) do something ;; -sparc*-sun-solaris*) do something ;; -mips*-*-elf*) do something ;; -esac -@end smallexample - -It is particularly important to use @samp{*} after the operating system -field, in order to match the version number which will be generated by -@file{config.guess}. - -In most cases you must be careful to match a range of processor types. -For most processor families, a trailing @samp{*} suffices, as in -@samp{mips*} above. For the i386 family, something along the lines of -@samp{i[3456]86} suffices at present. For the m68k family, you will -need something like @samp{m68*}. Of course, if you do not need to match -on the processor, it is simpler to just replace the entire field by a -@samp{*}, as in @samp{*-*-irix*}. - -@node Cross Compilation Tools -@chapter Cross Compilation Tools -@cindex cross tools - -The GNU configure and build system can be used to build @dfn{cross -compilation} tools. A cross compilation tool is a tool which runs on -one system and produces code which runs on another system. - -@menu -* Cross Compilation Concepts:: Cross Compilation Concepts. -* Host and Target:: Host and Target. -* Using the Host Type:: Using the Host Type. -* Specifying the Target:: Specifying the Target. -* Using the Target Type:: Using the Target Type. -* Cross Tools in the Cygnus Tree:: Cross Tools in the Cygnus Tree -@end menu - -@node Cross Compilation Concepts -@section Cross Compilation Concepts - -@cindex cross compiler -A compiler which produces programs which run on a different system is a -cross compilation compiler, or simply a @dfn{cross compiler}. -Similarly, we speak of cross assemblers, cross linkers, etc. - -In the normal case, a compiler produces code which runs on the same -system as the one on which the compiler runs. When it is necessary to -distinguish this case from the cross compilation case, such a compiler -is called a @dfn{native compiler}. Similarly, we speak of native -assemblers, etc. - -Although the debugger is not strictly speaking a compilation tool, it is -nevertheless meaningful to speak of a cross debugger: a debugger which -is used to debug code which runs on another system. Everything that is -said below about configuring cross compilation tools applies to the -debugger as well. - -@node Host and Target -@section Host and Target -@cindex host system -@cindex target system - -When building cross compilation tools, there are two different systems -involved: the system on which the tools will run, and the system for -which the tools generate code. - -The system on which the tools will run is called the @dfn{host} system. - -The system for which the tools generate code is called the @dfn{target} -system. - -For example, suppose you have a compiler which runs on a GNU/Linux -system and generates ELF programs for a MIPS embedded system. In this -case the GNU/Linux system is the host, and the MIPS ELF system is the -target. Such a compiler could be called a GNU/Linux cross MIPS ELF -compiler, or, equivalently, a @samp{i386-linux-gnu} cross -@samp{mips-elf} compiler. - -Naturally, most programs are not cross compilation tools. For those -programs, it does not make sense to speak of a target. It only makes -sense to speak of a target for tools like @samp{gcc} or the -@samp{binutils} which actually produce running code. For example, it -does not make sense to speak of the target of a tool like @samp{bison} -or @samp{make}. - -Most cross compilation tools can also serve as native tools. For a -native compilation tool, it is still meaningful to speak of a target. -For a native tool, the target is the same as the host. For example, for -a GNU/Linux native compiler, the host is GNU/Linux, and the target is -also GNU/Linux. - -@node Using the Host Type -@section Using the Host Type - -In almost all cases the host system is the system on which you run the -@samp{configure} script, and on which you build the tools (for the case -when they differ, @pxref{Canadian Cross}). - -@cindex @samp{AC_CANONICAL_HOST} -If your configure script needs to know the configuration name of the -host system, and the package is not a cross compilation tool and -therefore does not have a target, put @samp{AC_CANONICAL_HOST} in -@file{configure.in}. This macro will arrange to define a few shell -variables when the @samp{configure} script is run. - -@table @samp -@item host -The canonical configuration name of the host. This will normally be -determined by running the @file{config.guess} shell script, although the -user is permitted to override this by using an explicit @samp{--host} -option. -@item host_alias -In the unusual case that the user used an explicit @samp{--host} option, -this will be the argument to @samp{--host}. In the normal case, this -will be the same as the @samp{host} variable. -@item host_cpu -@itemx host_vendor -@itemx host_os -The first three parts of the canonical configuration name. -@end table - -The shell variables may be used by putting shell code in -@file{configure.in}. For an example, see @ref{Using Configuration -Names}. - -@node Specifying the Target -@section Specifying the Target - -By default, the @samp{configure} script will assume that the target is -the same as the host. This is the more common case; for example, it -leads to a native compiler rather than a cross compiler. - -@cindex @samp{--target} option -@cindex target option -@cindex configure target -If you want to build a cross compilation tool, you must specify the -target explicitly by using the @samp{--target} option when you run -@samp{configure}. The argument to @samp{--target} is the configuration -name of the system for which you wish to generate code. -@xref{Configuration Names}. - -For example, to build tools which generate code for a MIPS ELF embedded -system, you would use @samp{--target mips-elf}. - -@node Using the Target Type -@section Using the Target Type - -@cindex @samp{AC_CANONICAL_SYSTEM} -When writing @file{configure.in} for a cross compilation tool, you will -need to use information about the target. To do this, put -@samp{AC_CANONICAL_SYSTEM} in @file{configure.in}. - -@samp{AC_CANONICAL_SYSTEM} will look for a @samp{--target} option and -canonicalize it using the @file{config.sub} shell script. It will also -run @samp{AC_CANONICAL_HOST} (@pxref{Using the Host Type}). - -The target type will be recorded in the following shell variables. Note -that the host versions of these variables will also be defined by -@samp{AC_CANONICAL_HOST}. - -@table @samp -@item target -The canonical configuration name of the target. -@item target_alias -The argument to the @samp{--target} option. If the user did not specify -a @samp{--target} option, this will be the same as @samp{host_alias}. -@item target_cpu -@itemx target_vendor -@itemx target_os -The first three parts of the canonical target configuration name. -@end table - -Note that if @samp{host} and @samp{target} are the same string, you can -assume a native configuration. If they are different, you can assume a -cross configuration. - -It is arguably possible for @samp{host} and @samp{target} to represent -the same system, but for the strings to not be identical. For example, -if @samp{config.guess} returns @samp{sparc-sun-sunos4.1.4}, and somebody -configures with @samp{--target sparc-sun-sunos4.1}, then the slight -differences between the two versions of SunOS may be unimportant for -your tool. However, in the general case it can be quite difficult to -determine whether the differences between two configuration names are -significant or not. Therefore, by convention, if the user specifies a -@samp{--target} option without specifying a @samp{--host} option, it is -assumed that the user wants to configure a cross compilation tool. - -The variables @samp{target} and @samp{target_alias} should be handled -differently. - -In general, whenever the user may actually see a string, -@samp{target_alias} should be used. This includes anything which may -appear in the file system, such as a directory name or part of a tool -name. It also includes any tool output, unless it is clearly labelled -as the canonical target configuration name. This permits the user to -use the @samp{--target} option to specify how the tool will appear to -the outside world. - -On the other hand, when checking for characteristics of the target -system, @samp{target} should be used. This is because a wide variety of -@samp{--target} options may map into the same canonical configuration -name. You should not attempt to duplicate the canonicalization done by -@samp{config.sub} in your own code. - -By convention, cross tools are installed with a prefix of the argument -used with the @samp{--target} option, also known as @samp{target_alias} -(@pxref{Using the Target Type}). If the user does not use the -@samp{--target} option, and thus is building a native tool, no prefix is -used. - -For example, if gcc is configured with @samp{--target mips-elf}, then -the installed binary will be named @samp{mips-elf-gcc}. If gcc is -configured without a @samp{--target} option, then the installed binary -will be named @samp{gcc}. - -The autoconf macro @samp{AC_ARG_PROGRAM} will handle this for you. If -you are using automake, no more need be done; the programs will -automatically be installed with the correct prefixes. Otherwise, see -the autoconf documentation for @samp{AC_ARG_PROGRAM}. - -@node Cross Tools in the Cygnus Tree -@section Cross Tools in the Cygnus Tree - -The Cygnus tree is used for various packages including gdb, the GNU -binutils, and egcs. It is also, of course, used for Cygnus releases. - -In the Cygnus tree, the top level @file{configure} script uses the old -Cygnus configure system, not autoconf. The top level @file{Makefile.in} -is written to build packages based on what is in the source tree, and -supports building a large number of tools in a single -@samp{configure}/@samp{make} step. - -The Cygnus tree may be configured with a @samp{--target} option. The -@samp{--target} option applies recursively to every subdirectory, and -permits building an entire set of cross tools at once. - -@menu -* Host and Target Libraries:: Host and Target Libraries. -* Target Library Configure Scripts:: Target Library Configure Scripts. -* Make Targets in Cygnus Tree:: Make Targets in Cygnus Tree. -* Target libiberty:: Target libiberty -@end menu - -@node Host and Target Libraries -@subsection Host and Target Libraries - -The Cygnus tree distinguishes host libraries from target libraries. - -Host libraries are built with the compiler used to build the programs -which run on the host, which is called the host compiler. This includes -libraries such as @samp{bfd} and @samp{tcl}. These libraries are built -with the host compiler, and are linked into programs like the binutils -or gcc which run on the host. - -Target libraries are built with the target compiler. If gcc is present -in the source tree, then the target compiler is the gcc that is built -using the host compiler. Target libraries are libraries such as -@samp{newlib} and @samp{libstdc++}. These libraries are not linked into -the host programs, but are instead made available for use with programs -built with the target compiler. - -For the rest of this section, assume that gcc is present in the source -tree, so that it will be used to build the target libraries. - -There is a complication here. The configure process needs to know which -compiler you are going to use to build a tool; otherwise, the feature -tests will not work correctly. The Cygnus tree handles this by not -configuring the target libraries until the target compiler is built. In -order to permit everything to build using a single -@samp{configure}/@samp{make}, the configuration of the target libraries -is actually triggered during the make step. - -When the target libraries are configured, the @samp{--target} option is -not used. Instead, the @samp{--host} option is used with the argument -of the @samp{--target} option for the overall configuration. If no -@samp{--target} option was used for the overall configuration, the -@samp{--host} option will be passed with the output of the -@file{config.guess} shell script. Any @samp{--build} option is passed -down unchanged. - -This translation of configuration options is done because since the -target libraries are compiled with the target compiler, they are being -built in order to run on the target of the overall configuration. By -the definition of host, this means that their host system is the same as -the target system of the overall configuration. - -The same process is used for both a native configuration and a cross -configuration. Even when using a native configuration, the target -libraries will be configured and built using the newly built compiler. -This is particularly important for the C++ libraries, since there is no -reason to assume that the C++ compiler used to build the host tools (if -there even is one) uses the same ABI as the g++ compiler which will be -used to build the target libraries. - -There is one difference between a native configuration and a cross -configuration. In a native configuration, the target libraries are -normally configured and built as siblings of the host tools. In a cross -configuration, the target libraries are normally built in a subdirectory -whose name is the argument to @samp{--target}. This is mainly for -historical reasons. - -To summarize, running @samp{configure} in the Cygnus tree configures all -the host libraries and tools, but does not configure any of the target -libraries. Running @samp{make} then does the following steps: - -@itemize @bullet -@item -Build the host libraries. -@item -Build the host programs, including gcc. Note that we call gcc both a -host program (since it runs on the host) and a target compiler (since it -generates code for the target). -@item -Using the newly built target compiler, configure the target libraries. -@item -Build the target libraries. -@end itemize - -The steps need not be done in precisely this order, since they are -actually controlled by @file{Makefile} targets. - -@node Target Library Configure Scripts -@subsection Target Library Configure Scripts - -There are a few things you must know in order to write a configure -script for a target library. This is just a quick sketch, and beginners -shouldn't worry if they don't follow everything here. - -The target libraries are configured and built using a newly built target -compiler. There may not be any startup files or libraries for this -target compiler. In fact, those files will probably be built as part of -some target library, which naturally means that they will not exist when -your target library is configured. - -This means that the configure script for a target library may not use -any test which requires doing a link. This unfortunately includes many -useful autoconf macros, such as @samp{AC_CHECK_FUNCS}. autoconf macros -which do a compile but not a link, such as @samp{AC_CHECK_HEADERS}, may -be used. - -This is a severe restriction, but normally not a fatal one, as target -libraries can often assume the presence of other target libraries, and -thus know which functions will be available. - -As of this writing, the autoconf macro @samp{AC_PROG_CC} does a link to -make sure that the compiler works. This may fail in a target library, -so target libraries must use a different set of macros to locate the -compiler. See the @file{configure.in} file in a directory like -@file{libiberty} or @file{libgloss} for an example. - -As noted in the previous section, target libraries are sometimes built -in directories which are siblings to the host tools, and are sometimes -built in a subdirectory. The @samp{--with-target-subdir} configure -option will be passed when the library is configured. Its value will be -an empty string if the target library is a sibling. Its value will be -the name of the subdirectory if the target library is in a subdirectory. - -If the overall build is not a native build (i.e., the overall configure -used the @samp{--target} option), then the library will be configured -with the @samp{--with-cross-host} option. The value of this option will -be the host system of the overall build. Recall that the host system of -the library will be the target of the overall build. If the overall -build is a native build, the @samp{--with-cross-host} option will not be -used. - -A library which can be built both standalone and as a target library may -want to install itself into different directories depending upon the -case. When built standalone, or when built native, the library should -be installed in @samp{$(libdir)}. When built as a target library which -is not native, the library should be installed in @samp{$(tooldir)/lib}. -The @samp{--with-cross-host} option may be used to distinguish these -cases. - -This same test of @samp{--with-cross-host} may be used to see whether it -is OK to use link tests in the configure script. If the -@samp{--with-cross-host} option is not used, then the library is being -built either standalone or native, and a link should work. - -@node Make Targets in Cygnus Tree -@subsection Make Targets in Cygnus Tree - -The top level @file{Makefile} in the Cygnus tree defines targets for -every known subdirectory. - -For every subdirectory @var{dir} which holds a host library or program, -the @file{Makefile} target @samp{all-@var{dir}} will build that library -or program. - -There are dependencies among host tools. For example, building gcc -requires first building gas, because the gcc build process invokes the -target assembler. These dependencies are reflected in the top level -@file{Makefile}. - -For every subdirectory @var{dir} which holds a target library, the -@file{Makefile} target @samp{configure-target-@var{dir}} will configure -that library. The @file{Makefile} target @samp{all-target-@var{dir}} -will build that library. - -Every @samp{configure-target-@var{dir}} target depends upon -@samp{all-gcc}, since gcc, the target compiler, is required to configure -the tool. Every @samp{all-target-@var{dir}} target depends upon the -corresponding @samp{configure-target-@var{dir}} target. - -There are several other targets which may be of interest for each -directory: @samp{install-@var{dir}}, @samp{clean-@var{dir}}, and -@samp{check-@var{dir}}. There are also corresponding @samp{target} -versions of these for the target libraries , such as -@samp{install-target-@var{dir}}. - -@node Target libiberty -@subsection Target libiberty - -The @file{libiberty} subdirectory is currently a special case, in that -it is the only directory which is built both using the host compiler and -using the target compiler. - -This is because the files in @file{libiberty} are used when building the -host tools, and they are also incorporated into the @file{libstdc++} -target library as support code. - -This duality does not pose any particular difficulties. It means that -there are targets for both @samp{all-libiberty} and -@samp{all-target-libiberty}. - -In a native configuration, when target libraries are not built in a -subdirectory, the same objects are normally used as both the host build -and the target build. This is normally OK, since libiberty contains -only C code, and in a native configuration the results of the host -compiler and the target compiler are normally interoperable. - -Irix 6 is again an exception here, since the SGI native compiler -defaults to using the @samp{O32} ABI, and gcc defaults to using the -@samp{N32} ABI. On Irix 6, the target libraries are built in a -subdirectory even for a native configuration, avoiding this problem. - -There are currently no other libraries built for both the host and the -target, but there is no conceptual problem with adding more. - -@node Canadian Cross -@chapter Canadian Cross -@cindex canadian cross -@cindex building with a cross compiler -@cindex cross compiler, building with - -It is possible to use the GNU configure and build system to build a -program which will run on a system which is different from the system on -which the tools are built. In other words, it is possible to build -programs using a cross compiler. - -This is referred to as a @dfn{Canadian Cross}. - -@menu -* Canadian Cross Example:: Canadian Cross Example. -* Canadian Cross Concepts:: Canadian Cross Concepts. -* Build Cross Host Tools:: Build Cross Host Tools. -* Build and Host Options:: Build and Host Options. -* CCross not in Cygnus Tree:: Canadian Cross not in Cygnus Tree. -* CCross in Cygnus Tree:: Canadian Cross in Cygnus Tree. -* Supporting Canadian Cross:: Supporting Canadian Cross. -@end menu - -@node Canadian Cross Example -@section Canadian Cross Example - -Here is an example of a Canadian Cross. - -While running on a GNU/Linux, you can build a program which will run on -a Solaris system. You would use a GNU/Linux cross Solaris compiler to -build the program. - -Of course, you could not run the resulting program on your GNU/Linux -system. You would have to copy it over to a Solaris system before you -would run it. - -Of course, you could also simply build the programs on the Solaris -system in the first place. However, perhaps the Solaris system is not -available for some reason; perhaps you actually don't have one, but you -want to build the tools for somebody else to use. Or perhaps your -GNU/Linux system is much faster than your Solaris system. - -A Canadian Cross build is most frequently used when building programs to -run on a non-Unix system, such as DOS or Windows. It may be simpler to -configure and build on a Unix system than to support the configuration -machinery on a non-Unix system. - -@node Canadian Cross Concepts -@section Canadian Cross Concepts - -When building a Canadian Cross, there are at least two different systems -involved: the system on which the tools are being built, and the system -on which the tools will run. - -The system on which the tools are being built is called the @dfn{build} -system. - -The system on which the tools will run is called the host system. - -For example, if you are building a Solaris program on a GNU/Linux -system, as in the previous section, the build system would be GNU/Linux, -and the host system would be Solaris. - -It is, of course, possible to build a cross compiler using a Canadian -Cross (i.e., build a cross compiler using a cross compiler). In this -case, the system for which the resulting cross compiler generates code -is called the target system. (For a more complete discussion of host -and target systems, @pxref{Host and Target}). - -An example of building a cross compiler using a Canadian Cross would be -building a Windows cross MIPS ELF compiler on a GNU/Linux system. In -this case the build system would be GNU/Linux, the host system would be -Windows, and the target system would be MIPS ELF. - -The name Canadian Cross comes from the case when the build, host, and -target systems are all different. At the time that these issues were -all being hashed out, Canada had three national political parties. - -@node Build Cross Host Tools -@section Build Cross Host Tools - -In order to configure a program for a Canadian Cross build, you must -first build and install the set of cross tools you will use to build the -program. - -These tools will be build cross host tools. That is, they will run on -the build system, and will produce code that runs on the host system. - -It is easy to confuse the meaning of build and host here. Always -remember that the build system is where you are doing the build, and the -host system is where the resulting program will run. Therefore, you -need a build cross host compiler. - -In general, you must have a complete cross environment in order to do -the build. This normally means a cross compiler, cross assembler, and -so forth, as well as libraries and include files for the host system. - -@node Build and Host Options -@section Build and Host Options -@cindex configuring a canadian cross -@cindex canadian cross, configuring - -When you run @file{configure}, you must use both the @samp{--build} and -@samp{--host} options. - -@cindex @samp{--build} option -@cindex build option -@cindex configure build system -The @samp{--build} option is used to specify the configuration name of -the build system. This can normally be the result of running the -@file{config.guess} shell script, and it is reasonable to use -@samp{--build=`config.guess`}. - -@cindex @samp{--host} option -@cindex host option -@cindex configure host -The @samp{--host} option is used to specify the configuration name of -the host system. - -As we explained earlier, @file{config.guess} is used to set the default -value for the @samp{--host} option (@pxref{Using the Host Type}). We -can now see that since @file{config.guess} returns the type of system on -which it is run, it really identifies the build system. Since the host -system is normally the same as the build system (i.e., people do not -normally build using a cross compiler), it is reasonable to use the -result of @file{config.guess} as the default for the host system when -the @samp{--host} option is not used. - -It might seem that if the @samp{--host} option were used without the -@samp{--build} option that the configure script could run -@file{config.guess} to determine the build system, and presume a -Canadian Cross if the result of @file{config.guess} differed from the -@samp{--host} option. However, for historical reasons, some configure -scripts are routinely run using an explicit @samp{--host} option, rather -than using the default from @file{config.guess}. As noted earlier, it -is difficult or impossible to reliably compare configuration names -(@pxref{Using the Target Type}). Therefore, by convention, if the -@samp{--host} option is used, but the @samp{--build} option is not used, -then the build system defaults to the host system. - -@node CCross not in Cygnus Tree -@section Canadian Cross not in Cygnus Tree. - -If you are not using the Cygnus tree, you must explicitly specify the -cross tools which you want to use to build the program. This is done by -setting environment variables before running the @file{configure} -script. - -You must normally set at least the environment variables @samp{CC}, -@samp{AR}, and @samp{RANLIB} to the cross tools which you want to use to -build. - -For some programs, you must set additional cross tools as well, such as -@samp{AS}, @samp{LD}, or @samp{NM}. - -You would set these environment variables to the build cross tools which -you are going to use. - -For example, if you are building a Solaris program on a GNU/Linux -system, and your GNU/Linux cross Solaris compiler were named -@samp{solaris-gcc}, then you would set the environment variable -@samp{CC} to @samp{solaris-gcc}. - -@node CCross in Cygnus Tree -@section Canadian Cross in Cygnus Tree -@cindex canadian cross in cygnus tree - -This section describes configuring and building a Canadian Cross when -using the Cygnus tree. - -@menu -* Standard Cygnus CCross:: Building a Normal Program. -* Cross Cygnus CCross:: Building a Cross Program. -@end menu - -@node Standard Cygnus CCross -@subsection Building a Normal Program - -When configuring a Canadian Cross in the Cygnus tree, all the -appropriate environment variables are automatically set to -@samp{@var{host}-@var{tool}}, where @var{host} is the value used for the -@samp{--host} option, and @var{tool} is the name of the tool (e.g., -@samp{gcc}, @samp{as}, etc.). These tools must be on your @samp{PATH}. - -Adding a prefix of @var{host} will give the usual name for the build -cross host tools. To see this, consider that when these cross tools -were built, they were configured to run on the build system and to -produce code for the host system. That is, they were configured with a -@samp{--target} option that is the same as the system which we are now -calling the host. Recall that the default name for installed cross -tools uses the target system as a prefix (@pxref{Using the Target -Type}). Since that is the system which we are now calling the host, -@var{host} is the right prefix to use. - -For example, if you configure with @samp{--build=i386-linux-gnu} and -@samp{--host=solaris}, then the Cygnus tree will automatically default -to using the compiler @samp{solaris-gcc}. You must have previously -built and installed this compiler, probably by doing a build with no -@samp{--host} option and with a @samp{--target} option of -@samp{solaris}. - -@node Cross Cygnus CCross -@subsection Building a Cross Program - -There are additional considerations if you want to build a cross -compiler, rather than a native compiler, in the Cygnus tree using a -Canadian Cross. - -When you build a cross compiler using the Cygnus tree, then the target -libraries will normally be built with the newly built target compiler -(@pxref{Host and Target Libraries}). However, this will not work when -building with a Canadian Cross. This is because the newly built target -compiler will be a program which runs on the host system, and therefore -will not be able to run on the build system. - -Therefore, when building a cross compiler with the Cygnus tree, you must -first install a set of build cross target tools. These tools will be -used when building the target libraries. - -Note that this is not a requirement of a Canadian Cross in general. For -example, it would be possible to build just the host cross target tools -on the build system, to copy the tools to the host system, and to build -the target libraries on the host system. The requirement for build -cross target tools is imposed by the Cygnus tree, which expects to be -able to build both host programs and target libraries in a single -@samp{configure}/@samp{make} step. Because it builds these in a single -step, it expects to be able to build the target libraries on the build -system, which means that it must use a build cross target toolchain. - -For example, suppose you want to build a Windows cross MIPS ELF compiler -on a GNU/Linux system. You must have previously installed both a -GNU/Linux cross Windows compiler and a GNU/Linux cross MIPS ELF -compiler. - -In order to build the Windows (configuration name @samp{i386-cygwin32}) -cross MIPS ELF (configure name @samp{mips-elf}) compiler, you might -execute the following commands (long command lines are broken across -lines with a trailing backslash as a continuation character). - -@example -mkdir linux-x-cygwin32 -cd linux-x-cygwin32 -@var{srcdir}/configure --target i386-cygwin32 --prefix=@var{installdir} \ - --exec-prefix=@var{installdir}/H-i386-linux -make -make install -cd .. -mkdir linux-x-mips-elf -cd linux-x-mips-elf -@var{srcdir}/configure --target mips-elf --prefix=@var{installdir} \ - --exec-prefix=@var{installdir}/H-i386-linux -make -make install -cd .. -mkdir cygwin32-x-mips-elf -cd cygwin32-x-mips-elf -@var{srcdir}/configure --build=i386-linux-gnu --host=i386-cygwin32 \ - --target=mips-elf --prefix=@var{wininstalldir} \ - --exec-prefix=@var{wininstalldir}/H-i386-cygwin32 -make -make install -@end example - -You would then copy the contents of @var{wininstalldir} over to the -Windows machine, and run the resulting programs. - -@node Supporting Canadian Cross -@section Supporting Canadian Cross - -If you want to make it possible to build a program you are developing -using a Canadian Cross, you must take some care when writing your -configure and make rules. Simple cases will normally work correctly. -However, it is not hard to write configure and make tests which will -fail in a Canadian Cross. - -@menu -* CCross in Configure:: Supporting Canadian Cross in Configure Scripts. -* CCross in Make:: Supporting Canadian Cross in Makefiles. -@end menu - -@node CCross in Configure -@subsection Supporting Canadian Cross in Configure Scripts -@cindex canadian cross in configure - -In a @file{configure.in} file, after calling @samp{AC_PROG_CC}, you can -find out whether this is a Canadian Cross configure by examining the -shell variable @samp{cross_compiling}. In a Canadian Cross, which means -that the compiler is a cross compiler, @samp{cross_compiling} will be -@samp{yes}. In a normal configuration, @samp{cross_compiling} will be -@samp{no}. - -You ordinarily do not need to know the type of the build system in a -configure script. However, if you do need that information, you can get -it by using the macro @samp{AC_CANONICAL_SYSTEM}, the same macro that is -used to determine the target system. This macro will set the variables -@samp{build}, @samp{build_alias}, @samp{build_cpu}, @samp{build_vendor}, -and @samp{build_os}, which correspond to the similar @samp{target} and -@samp{host} variables, except that they describe the build system. - -When writing tests in @file{configure.in}, you must remember that you -want to test the host environment, not the build environment. - -Macros like @samp{AC_CHECK_FUNCS} which use the compiler will test the -host environment. That is because the tests will be done by running the -compiler, which is actually a build cross host compiler. If the -compiler can find the function, that means that the function is present -in the host environment. - -Tests like @samp{test -f /dev/ptyp0}, on the other hand, will test the -build environment. Remember that the configure script is running on the -build system, not the host system. If your configure scripts examines -files, those files will be on the build system. Whatever you determine -based on those files may or may not be the case on the host system. - -Most autoconf macros will work correctly for a Canadian Cross. The main -exception is @samp{AC_TRY_RUN}. This macro tries to compile and run a -test program. This will fail in a Canadian Cross, because the program -will be compiled for the host system, which means that it will not run -on the build system. - -The @samp{AC_TRY_RUN} macro provides an optional argument to tell the -configure script what to do in a Canadian Cross. If that argument is -not present, you will get a warning when you run @samp{autoconf}: -@smallexample -warning: AC_TRY_RUN called without default to allow cross compiling -@end smallexample -@noindent -This tells you that the resulting @file{configure} script will not work -with a Canadian Cross. - -In some cases while it may better to perform a test at configure time, -it is also possible to perform the test at run time. In such a case you -can use the cross compiling argument to @samp{AC_TRY_RUN} to tell your -program that the test could not be performed at configure time. - -There are a few other autoconf macros which will not work correctly with -a Canadian Cross: a partial list is @samp{AC_FUNC_GETPGRP}, -@samp{AC_FUNC_SETPGRP}, @samp{AC_FUNC_SETVBUF_REVERSED}, and -@samp{AC_SYS_RESTARTABLE_SYSCALLS}. The @samp{AC_CHECK_SIZEOF} macro is -generally not very useful with a Canadian Cross; it permits an optional -argument indicating the default size, but there is no way to know what -the correct default should be. - -@node CCross in Make -@subsection Supporting Canadian Cross in Makefiles. -@cindex canadian cross in makefile - -The main Canadian Cross issue in a @file{Makefile} arises when you want -to use a subsidiary program to generate code or data which you will then -include in your real program. - -If you compile this subsidiary program using @samp{$(CC)} in the usual -way, you will not be able to run it. This is because @samp{$(CC)} will -build a program for the host system, but the program is being built on -the build system. - -You must instead use a compiler for the build system, rather than the -host system. In the Cygnus tree, this make variable -@samp{$(CC_FOR_BUILD)} will hold a compiler for the build system. - -Note that you should not include @file{config.h} in a file you are -compiling with @samp{$(CC_FOR_BUILD)}. The @file{configure} script will -build @file{config.h} with information for the host system. However, -you are compiling the file using a compiler for the build system (a -native compiler). Subsidiary programs are normally simple filters which -do no user interaction, and it is normally possible to write them in a -highly portable fashion so that the absence of @file{config.h} is not -crucial. - -@cindex @samp{HOST_CC} -The gcc @file{Makefile.in} shows a complex situation in which certain -files, such as @file{rtl.c}, must be compiled into both subsidiary -programs run on the build system and into the final program. This -approach may be of interest for advanced build system hackers. Note -that the build system compiler is rather confusingly called -@samp{HOST_CC}. - -@node Cygnus Configure -@chapter Cygnus Configure -@cindex cygnus configure - -The Cygnus configure script predates autoconf. All of its interesting -features have been incorporated into autoconf. No new programs should -be written to use the Cygnus configure script. - -However, the Cygnus configure script is still used in a few places: at -the top of the Cygnus tree and in a few target libraries in the Cygnus -tree. Until those uses have been replaced with autoconf, some brief -notes are appropriate here. This is not complete documentation, but it -should be possible to use this as a guide while examining the scripts -themselves. - -@menu -* Cygnus Configure Basics:: Cygnus Configure Basics. -* Cygnus Configure in C++ Libraries:: Cygnus Configure in C++ Libraries. -@end menu - -@node Cygnus Configure Basics -@section Cygnus Configure Basics - -Cygnus configure does not use any generated files; there is no program -corresponding to @samp{autoconf}. Instead, there is a single shell -script named @samp{configure} which may be found at the top of the -Cygnus tree. This shell script was written by hand; it was not -generated by autoconf, and it is incorrect, and indeed harmful, to run -@samp{autoconf} in the top level of a Cygnus tree. - -Cygnus configure works in a particular directory by examining the file -@file{configure.in} in that directory. That file is broken into four -separate shell scripts. - -The first is the contents of @file{configure.in} up to a line that -starts with @samp{# per-host:}. This is the common part. - -The second is the rest of @file{configure.in} up to a line that starts -with @samp{# per-target:}. This is the per host part. - -The third is the rest of @file{configure.in} up to a line that starts -with @samp{# post-target:}. This is the per target part. - -The fourth is the remainder of @file{configure.in}. This is the post -target part. - -If any of these comment lines are missing, the corresponding shell -script is empty. - -Cygnus configure will first execute the common part. This must set the -shell variable @samp{srctrigger} to the name of a source file, to -confirm that Cygnus configure is looking at the right directory. This -may set the shell variables @samp{package_makefile_frag} and -@samp{package_makefile_rules_frag}. - -Cygnus configure will next set the @samp{build} and @samp{host} shell -variables, and execute the per host part. This may set the shell -variable @samp{host_makefile_frag}. - -Cygnus configure will next set the @samp{target} variable, and execute -the per target part. This may set the shell variable -@samp{target_makefile_frag}. - -Any of these scripts may set the @samp{subdirs} shell variable. This -variable is a list of subdirectories where a @file{Makefile.in} file may -be found. Cygnus configure will automatically look for a -@file{Makefile.in} file in the current directory. The @samp{subdirs} -shell variable is not normally used, and I believe that the only -directory which uses it at present is @file{newlib}. - -For each @file{Makefile.in}, Cygnus configure will automatically create -a @file{Makefile} by adding definitions for @samp{make} variables such -as @samp{host} and @samp{target}, and automatically editing the values -of @samp{make} variables such as @samp{prefix} if they are present. - -Also, if any of the @samp{makefile_frag} shell variables are set, Cygnus -configure will interpret them as file names relative to either the -working directory or the source directory, and will read the contents of -the file into the generated @file{Makefile}. The file contents will be -read in after the first line in @file{Makefile.in} which starts with -@samp{####}. - -These @file{Makefile} fragments are used to customize behaviour for a -particular host or target. They serve to select particular files to -compile, and to define particular preprocessor macros by providing -values for @samp{make} variables which are then used during compilation. -Cygnus configure, unlike autoconf, normally does not do feature tests, -and normally requires support to be added manually for each new host. - -The @file{Makefile} fragment support is similar to the autoconf -@samp{AC_SUBST_FILE} macro. - -After creating each @file{Makefile}, the post target script will be run -(i.e., it may be run several times). This script may further customize -the @file{Makefile}. When it is run, the shell variable @samp{Makefile} -will hold the name of the @file{Makefile}, including the appropriate -directory component. - -Like an autoconf generated @file{configure} script, Cygnus configure -will create a file named @file{config.status} which, when run, will -automatically recreate the configuration. The @file{config.status} file -will simply execute the Cygnus configure script again with the -appropriate arguments. - -Any of the parts of @file{configure.in} may set the shell variables -@samp{files} and @samp{links}. Cygnus configure will set up symlinks -from the names in @samp{links} to the files named in @samp{files}. This -is similar to the autoconf @samp{AC_LINK_FILES} macro. - -Finally, any of the parts of @file{configure.in} may set the shell -variable @samp{configdirs} to a set of subdirectories. If it is set, -Cygnus configure will recursively run the configure process in each -subdirectory. If the subdirectory uses Cygnus configure, it will -contain a @file{configure.in} file but no @file{configure} file, in -which case Cygnus configure will invoke itself recursively. If the -subdirectory has a @file{configure} file, Cygnus configure assumes that -it is an autoconf generated @file{configure} script, and simply invokes -it directly. - -@node Cygnus Configure in C++ Libraries -@section Cygnus Configure in C++ Libraries -@cindex @file{libstdc++} configure -@cindex @file{libio} configure -@cindex @file{libg++} configure - -The C++ library configure system, written by Per Bothner, deserves -special mention. It uses Cygnus configure, but it does feature testing -like that done by autoconf generated @file{configure} scripts. This -approach is used in the libraries @file{libio}, @file{libstdc++}, and -@file{libg++}. - -Most of the @file{Makefile} information is written out by the shell -script @file{libio/config.shared}. Each @file{configure.in} file sets -certain shell variables, and then invokes @file{config.shared} to create -two package @file{Makefile} fragments. These fragments are then -incorporated into the resulting @file{Makefile} by the Cygnus configure -script. - -The file @file{_G_config.h} is created in the @file{libio} object -directory by running the shell script @file{libio/gen-params}. This -shell script uses feature tests to define macros and typedefs in -@file{_G_config.h}. - -@node Multilibs -@chapter Multilibs -@cindex multilibs - -For some targets gcc may have different processor requirements depending -upon command line options. An obvious example is the -@samp{-msoft-float} option supported on several processors. This option -means that the floating point registers are not available, which means -that floating point operations must be done by calling an emulation -subroutine rather than by using machine instructions. - -For such options, gcc is often configured to compile target libraries -twice: once with @samp{-msoft-float} and once without. When gcc -compiles target libraries more than once, the resulting libraries are -called @dfn{multilibs}. - -Multilibs are not really part of the GNU configure and build system, but -we discuss them here since they require support in the @file{configure} -scripts and @file{Makefile}s used for target libraries. - -@menu -* Multilibs in gcc:: Multilibs in gcc. -* Multilibs in Target Libraries:: Multilibs in Target Libraries. -@end menu - -@node Multilibs in gcc -@section Multilibs in gcc - -In gcc, multilibs are defined by setting the variable -@samp{MULTILIB_OPTIONS} in the target @file{Makefile} fragment. Several -other @samp{MULTILIB} variables may also be defined there. @xref{Target -Fragment, , The Target Makefile Fragment, gcc, Using and Porting GNU -CC}. - -If you have built gcc, you can see what multilibs it uses by running it -with the @samp{-print-multi-lib} option. The output @samp{.;} means -that no multilibs are used. In general, the output is a sequence of -lines, one per multilib. The first part of each line, up to the -@samp{;}, is the name of the multilib directory. The second part is a -list of compiler options separated by @samp{@@} characters. - -Multilibs are built in a tree of directories. The top of the tree, -represented by @samp{.} in the list of multilib directories, is the -default library to use when no special compiler options are used. The -subdirectories of the tree hold versions of the library to use when -particular compiler options are used. - -@node Multilibs in Target Libraries -@section Multilibs in Target Libraries - -The target libraries in the Cygnus tree are automatically built with -multilibs. That means that each library is built multiple times. - -This default is set in the top level @file{configure.in} file, by adding -@samp{--enable-multilib} to the list of arguments passed to configure -when it is run for the target libraries (@pxref{Host and Target -Libraries}). - -Each target library uses the shell script @file{config-ml.in}, written -by Doug Evans, to prepare to build target libraries. This shell script -is invoked after the @file{Makefile} has been created by the -@file{configure} script. If multilibs are not enabled, it does nothing, -otherwise it modifies the @file{Makefile} to support multilibs. - -The @file{config-ml.in} script makes one copy of the @file{Makefile} for -each multilib in the appropriate subdirectory. When configuring in the -source directory (which is not recommended), it will build a symlink -tree of the sources in each subdirectory. - -The @file{config-ml.in} script sets several variables in the various -@file{Makefile}s. The @file{Makefile.in} must have definitions for -these variables already; @file{config-ml.in} simply changes the existing -values. The @file{Makefile} should use default values for these -variables which will do the right thing in the subdirectories. - -@table @samp -@item MULTISRCTOP -@file{config-ml.in} will set this to a sequence of @samp{../} strings, -where the number of strings is the number of multilib levels in the -source tree. The default value should be the empty string. -@item MULTIBUILDTOP -@file{config-ml.in} will set this to a sequence of @samp{../} strings, -where the number of strings is number of multilib levels in the object -directory. The default value should be the empty string. This will -differ from @samp{MULTISRCTOP} when configuring in the source tree -(which is not recommended). -@item MULTIDIRS -In the top level @file{Makefile} only, @file{config-ml.in} will set this -to the list of multilib subdirectories. The default value should be the -empty string. -@item MULTISUBDIR -@file{config-ml.in} will set this to the installed subdirectory name to -use for this subdirectory, with a leading @samp{/}. The default value -shold be the empty string. -@item MULTIDO -@itemx MULTICLEAN -In the top level @file{Makefile} only, @file{config-ml.in} will set -these variables to commands to use when doing a recursive make. These -variables should both default to the string @samp{true}, so that by -default nothing happens. -@end table - -All references to the parent of the source directory should use the -variable @samp{MULTISRCTOP}. Instead of writing @samp{$(srcdir)/..}, -you must write @samp{$(srcdir)/$(MULTISRCTOP)..}. - -Similarly, references to the parent of the object directory should use -the variable @samp{MULTIBUILDTOP}. - -In the installation target, the libraries should be installed in the -subdirectory @samp{MULTISUBDIR}. Instead of installing -@samp{$(libdir)/libfoo.a}, install -@samp{$(libdir)$(MULTISUBDIR)/libfoo.a}. - -The @file{config-ml.in} script also modifies the top level -@file{Makefile} to add @samp{multi-do} and @samp{multi-clean} targets -which are used when building multilibs. - -The default target of the @file{Makefile} should include the following -command: -@smallexample -@@$(MULTIDO) $(FLAGS_TO_PASS) DO=all multi-do -@end smallexample -@noindent -This assumes that @samp{$(FLAGS_TO_PASS)} is defined as a set of -variables to pass to a recursive invocation of @samp{make}. This will -build all the multilibs. Note that the default value of @samp{MULTIDO} -is @samp{true}, so by default this command will do nothing. It will -only do something in the top level @file{Makefile} if multilibs were -enabled. - -The @samp{install} target of the @file{Makefile} should include the -following command: -@smallexample -@@$(MULTIDO) $(FLAGS_TO_PASS) DO=install multi-do -@end smallexample - -In general, any operation, other than clean, which should be performed -on all the multilibs should use a @samp{$(MULTIDO)} line, setting the -variable @samp{DO} to the target of each recursive call to @samp{make}. - -The @samp{clean} targets (@samp{clean}, @samp{mostlyclean}, etc.) should -use @samp{$(MULTICLEAN)}. For example, the @samp{clean} target should -do this: -@smallexample -@@$(MULTICLEAN) DO=clean multi-clean -@end smallexample - -@node FAQ -@chapter Frequently Asked Questions - -@table @asis -@item Which do I run first, @samp{autoconf} or @samp{automake}? -Except when you first add autoconf or automake support to a package, you -shouldn't run either by hand. Instead, configure with the -@samp{--enable-maintainer-mode} option, and let @samp{make} take care of -it. - -@cindex undefined macros -@item @samp{autoconf} says something about undefined macros. -This means that you have macros in your @file{configure.in} which are -not defined by @samp{autoconf}. You may be using an old version of -@samp{autoconf}; try building and installing a newer one. Make sure the -newly installled @samp{autoconf} is first on your @samp{PATH}. Also, -see the next question. - -@cindex @samp{CY_GNU_GETTEXT} in @file{configure} -@cindex @samp{AM_PROG_LIBTOOL} in @file{configure} -@item My @file{configure} script has stuff like @samp{CY_GNU_GETTEXT} in it. -This means that you have macros in your @file{configure.in} which should -be defined in your @file{aclocal.m4} file, but aren't. This usually -means that @samp{aclocal} was not able to appropriate definitions of the -macros. Make sure that you have installed all the packages you need. -In particular, make sure that you have installed libtool (this is where -@samp{AM_PROG_LIBTOOL} is defined) and gettext (this is where -@samp{CY_GNU_GETTEXT} is defined, at least in the Cygnus version of -gettext). - -@cindex @file{Makefile}, garbage characters -@item My @file{Makefile} has @samp{@@} characters in it. -This may mean that you tried to use an autoconf substitution in your -@file{Makefile.in} without adding the appropriate @samp{AC_SUBST} call -to your @file{configure} script. Or it may just mean that you need to -rebuild @file{Makefile} in your build directory. To rebuild -@file{Makefile} from @file{Makefile.in}, run the shell script -@file{config.status} with no arguments. If you need to force -@file{configure} to run again, first run @samp{config.status --recheck}. -These runs are normally done automatically by @file{Makefile} targets, -but if your @file{Makefile} has gotten messed up you'll need to help -them along. - -@cindex @samp{config.status --recheck} -@item Why do I have to run both @samp{config.status --recheck} and @samp{config.status}? -Normally, you don't; they will be run automatically by @file{Makefile} -targets. If you do need to run them, use @samp{config.status --recheck} -to run the @file{configure} script again with the same arguments as the -first time you ran it. Use @samp{config.status} (with no arguments) to -regenerate all files (@file{Makefile}, @file{config.h}, etc.) based on -the results of the configure script. The two cases are separate because -it isn't always necessary to regenerate all the files after running -@samp{config.status --recheck}. The @file{Makefile} targets generated -by automake will use the environment variables @samp{CONFIG_FILES} and -@samp{CONFIG_HEADERS} to only regenerate files as they are needed. - -@item What is the Cygnus tree? -The Cygnus tree is used for various packages including gdb, the GNU -binutils, and egcs. It is also, of course, used for Cygnus releases. -It is the build system which was developed at Cygnus, using the Cygnus -configure script. It permits building many different packages with a -single configure and make. The configure scripts in the tree are being -converted to autoconf, but the general build structure remains intact. - -@item Why do I have to keep rebuilding and reinstalling the tools? -I know, it's a pain. Unfortunately, there are bugs in the tools -themselves which need to be fixed, and each time that happens everybody -who uses the tools need to reinstall new versions of them. I don't know -if there is going to be a clever fix until the tools stabilize. - -@item Why not just have a Cygnus tree @samp{make} target to update the tools? -The tools unfortunately need to be installed before they can be used. -That means that they must be built using an appropriate prefix, and it -seems unwise to assume that every configuration uses an appropriate -prefix. It might be possible to make them work in place, or it might be -possible to install them in some subdirectory; so far these approaches -have not been implemented. -@end table - -@node Index -@unnumbered Index - -@printindex cp - -@contents -@bye |