summaryrefslogtreecommitdiffstats
path: root/contrib/perl5/t/op/numconvert.t
diff options
context:
space:
mode:
Diffstat (limited to 'contrib/perl5/t/op/numconvert.t')
-rwxr-xr-xcontrib/perl5/t/op/numconvert.t186
1 files changed, 186 insertions, 0 deletions
diff --git a/contrib/perl5/t/op/numconvert.t b/contrib/perl5/t/op/numconvert.t
new file mode 100755
index 0000000..8eb9b6e
--- /dev/null
+++ b/contrib/perl5/t/op/numconvert.t
@@ -0,0 +1,186 @@
+#!./perl
+
+#
+# test the conversion operators
+#
+# Notations:
+#
+# "N p i N vs N N": Apply op-N, then op-p, then op-i, then reporter-N
+# Compare with application of op-N, then reporter-N
+# Right below are descriptions of different ops and reporters.
+
+# We do not use these subroutines any more, sub overhead makes a "switch"
+# solution better:
+
+# obviously, 0, 1 and 2, 3 are destructive. (XXXX 64-bit? 4 destructive too)
+
+# *0 = sub {--$_[0]}; # -
+# *1 = sub {++$_[0]}; # +
+
+# # Converters
+# *2 = sub { $_[0] = $max_uv & $_[0]}; # U
+# *3 = sub { use integer; $_[0] += $zero}; # I
+# *4 = sub { $_[0] += $zero}; # N
+# *5 = sub { $_[0] = "$_[0]" }; # P
+
+# # Side effects
+# *6 = sub { $max_uv & $_[0]}; # u
+# *7 = sub { use integer; $_[0] + $zero}; # i
+# *8 = sub { $_[0] + $zero}; # n
+# *9 = sub { $_[0] . "" }; # p
+
+# # Reporters
+# sub a2 { sprintf "%u", $_[0] } # U
+# sub a3 { sprintf "%d", $_[0] } # I
+# sub a4 { sprintf "%g", $_[0] } # N
+# sub a5 { "$_[0]" } # P
+
+BEGIN {
+ chdir 't' if -d 't';
+ @INC = '../lib';
+}
+
+use strict 'vars';
+
+my $max_chain = $ENV{PERL_TEST_NUMCONVERTS} || 2;
+
+# Bulk out if unsigned type is hopelessly wrong:
+my $max_uv1 = ~0;
+my $max_uv2 = sprintf "%u", $max_uv1 ** 6; # 6 is an arbitrary number here
+my $big_iv = do {use integer; $max_uv1 * 16}; # 16 is an arbitrary number here
+
+print "# max_uv1 = $max_uv1, max_uv2 = $max_uv2, big_iv = $big_iv\n";
+if ($max_uv1 ne $max_uv2 or $big_iv > $max_uv1) {
+ print "1..0\n# Unsigned arithmetic is not sane\n";
+ exit 0;
+}
+
+my $st_t = 4*4; # We try 4 initializers and 4 reporters
+
+my $num = 0;
+$num += 10**$_ - 4**$_ for 1.. $max_chain;
+$num *= $st_t;
+print "1..$num\n"; # In fact 15 times more subsubtests...
+
+my $max_uv = ~0;
+my $max_iv = int($max_uv/2);
+my $zero = 0;
+
+my $l_uv = length $max_uv;
+my $l_iv = length $max_iv;
+
+# Hope: the first digits are good
+my $larger_than_uv = substr 97 x 100, 0, $l_uv;
+my $smaller_than_iv = substr 12 x 100, 0, $l_iv;
+my $yet_smaller_than_iv = substr 97 x 100, 0, ($l_iv - 1);
+
+my @list = (1, $yet_smaller_than_iv, $smaller_than_iv, $max_iv, $max_iv + 1,
+ $max_uv, $max_uv + 1);
+unshift @list, (reverse map -$_, @list), 0; # 15 elts
+@list = map "$_", @list; # Normalize
+
+# print "@list\n";
+
+
+my @opnames = split //, "-+UINPuinp";
+
+# @list = map { 2->($_), 3->($_), 4->($_), 5->($_), } @list; # Prepare input
+
+#print "@list\n";
+#print "'@ops'\n";
+
+my $test = 1;
+my $nok;
+for my $num_chain (1..$max_chain) {
+ my @ops = map [split //], grep /[4-9]/,
+ map { sprintf "%0${num_chain}d", $_ } 0 .. 10**$num_chain - 1;
+
+ #@ops = ([]) unless $num_chain;
+ #@ops = ([6, 4]);
+
+ # print "'@ops'\n";
+ for my $op (@ops) {
+ for my $first (2..5) {
+ for my $last (2..5) {
+ $nok = 0;
+ my @otherops = grep $_ <= 3, @$op;
+ my @curops = ($op,\@otherops);
+
+ for my $num (@list) {
+ my $inpt;
+ my @ans;
+
+ for my $short (0, 1) {
+ # undef $inpt; # Forget all we had - some bugs were masked
+
+ $inpt = $num; # Try to not contaminate $num...
+ $inpt = "$inpt";
+ if ($first == 2) {
+ $inpt = $max_uv & $inpt; # U 2
+ } elsif ($first == 3) {
+ use integer; $inpt += $zero; # I 3
+ } elsif ($first == 4) {
+ $inpt += $zero; # N 4
+ } else {
+ $inpt = "$inpt"; # P 5
+ }
+
+ # Saves 20% of time - not with this logic:
+ #my $tmp = $inpt;
+ #my $tmp1 = $num;
+ #next if $num_chain > 1
+ # and "$tmp" ne "$tmp1"; # Already the coercion gives problems...
+
+ for my $curop (@{$curops[$short]}) {
+ if ($curop < 5) {
+ if ($curop < 3) {
+ if ($curop == 0) {
+ --$inpt; # - 0
+ } elsif ($curop == 1) {
+ ++$inpt; # + 1
+ } else {
+ $inpt = $max_uv & $inpt; # U 2
+ }
+ } elsif ($curop == 3) {
+ use integer; $inpt += $zero;
+ } else {
+ $inpt += $zero; # N 4
+ }
+ } elsif ($curop < 8) {
+ if ($curop == 5) {
+ $inpt = "$inpt"; # P 5
+ } elsif ($curop == 6) {
+ $max_uv & $inpt; # u 6
+ } else {
+ use integer; $inpt + $zero;
+ }
+ } elsif ($curop == 8) {
+ $inpt + $zero; # n 8
+ } else {
+ $inpt . ""; # p 9
+ }
+ }
+
+ if ($last == 2) {
+ $inpt = sprintf "%u", $inpt; # U 2
+ } elsif ($last == 3) {
+ $inpt = sprintf "%d", $inpt; # I 3
+ } elsif ($last == 4) {
+ $inpt = sprintf "%g", $inpt; # N 4
+ } else {
+ $inpt = "$inpt"; # P 5
+ }
+ push @ans, $inpt;
+ }
+ $nok++,
+ print "# '$ans[0]' ne '$ans[1]',\t$num\t=> @opnames[$first,@{$curops[0]},$last] vs @opnames[$first,@{$curops[1]},$last]\n"
+ if $ans[0] ne $ans[1];
+ }
+ print "not " if $nok;
+ print "ok $test\n";
+ #print $txt if $nok;
+ $test++;
+ }
+ }
+ }
+}
OpenPOWER on IntegriCloud