diff options
Diffstat (limited to 'contrib/perl5/hints/svr5.sh')
| -rw-r--r-- | contrib/perl5/hints/svr5.sh | 221 |
1 files changed, 0 insertions, 221 deletions
diff --git a/contrib/perl5/hints/svr5.sh b/contrib/perl5/hints/svr5.sh deleted file mode 100644 index f736895..0000000 --- a/contrib/perl5/hints/svr5.sh +++ /dev/null @@ -1,221 +0,0 @@ -# svr5 hints, System V Release 5.x (UnixWare 7) -# mods after mail fm Andy Dougherty -# Reworked by hops@sco.com Sept/Oct 1999 for UW7.1 platform support -# Boyd Gerber, gerberb@zenez.com 1999/09/21 for threads support. -# Originally taken from svr4 hints.sh 21-Sep-98 hops@sco.com -# which was version of 1996/10/25 by Tye McQueen, tye@metronet.com - -# Use Configure -Dusethreads to enable threads. -# Use Configure -Dcc=gcc to use gcc. -case "$cc" in -*gcc*) - # "$gccversion" not set yet - vers=`gcc -v 2>&1 | sed -n -e 's@.*version \([^ ][^ ]*\) .*@\1@p'` - case $vers in - *2.95*) - ccflags='-fno-strict-aliasing' - # More optimisation provided in gcc-2.95 causes miniperl to segv. - # -fno-strict-aliasing is supposed to correct this but - # if it doesn't and you get segv when the build runs miniperl then - # disable optimisation as below - # optimize=' ' - ;; - esac - ;; -esac - -# Hardwire the processor to 586 for consistancy with autoconf -# archname='i586-svr5' -# -- seems this is generally disliked by perl porters so leave it to float - -# Our default setup excludes anything from /usr/ucblib (and consequently dbm) -# as later modules assume symbols found are available in shared libs -# On svr5 these are static archives which causes problems for -# dynamic modules loaded later (and ucblib is a bad dream anyway) -# -# However there is a dbm library built from the ucb sources outside ucblib -# at http://www.sco.com/skunkware (installing into /usr/local) so if we -# detect this we'll use it. You can change the default -# (to allow ucblib and its dbm or disallowing non ucb dbm) by -# changing 'want_*' config values below to '' to disable or otherwise to enable - -# Leave leading tabs so Configure doesn't propagate variables to config.sh - - want_ucb='' # don't use anything from /usr/ucblib - icky - want_dbm='yes' # use dbm if can find library in /usr/local/lib - want_gdbm='yes' # use gdbm if can find library in /usr/local/lib - want_udk70='' # link with old static libc pieces - # link with udk70 if building on 7.1 abd want resulting binary - # to run on uw7.0* - it will link in referenced static symbols - # of libc that are (now) in the shared libc.so on 7.1 but were - # not there in 7.0. - # There are still scenarios where this is still insufficient so - # overall it is preferable to get ptf7051e - # ftp://ftp.sco.com/SLS/ptf7051e.Z - # installed on any/all 7.0 systems and leave the above unset. - -if [ "$want_ucb" ] ; then - ldflags= '-L/usr/ucblib' - ccflags='-I/usr/ucbinclude' - # /usr/ccs/include and /usr/ccs/lib are used implicitly by cc as reqd -else - libswanted=`echo " $libswanted " | sed -e 's/ ucb / /'` - glibpth=`echo " $glibpth " | sed -e 's/ \/usr\/ucblib / /'` - - # If see libdbm in /usr/local and not overidden assume its the - # non ucblib rebuild from skunkware and use it - if [ ! -f /usr/local/lib/libdbm.so -o ! "$want_dbm" ] ; then - i_dbm='undef' - libswanted=`echo " $libswanted " | sed -e 's/ dbm / /'` - fi -fi - -if [ ! "$want_gdbm" ] ; then - i_gdbm='undef' - libswanted=`echo " $libswanted " | sed -e 's/ gdbm / /'` -fi - - -# Don't use problematic libraries: -# libmalloc.a - Probably using Perl's malloc() anyway. -# libc: on UW7 don't want -lc explicitly as native cc gives warnings/errors -libswanted=`echo " $libswanted " | sed -e 's/ malloc / /' -e 's/ c / /'` - -# remove /shlib and /lib from library search path as both symlink to /usr/lib -# where runtime shared libc is -glibpth=`echo " $glibpth " | sed -e 's/ \/shlib / /' -e 's/ \/lib / /` - -# Don't use BSD emulation pieces (/usr/ucblib) regardless -# these would probably be autonondetected anyway but ... -d_Gconvert='gcvt((x),(n),(b))' # Try gcvt() before gconvert(). -d_bcopy='undef' d_bcmp='undef' d_bzero='undef' d_safebcpy='undef' -d_index='undef' d_killpg='undef' d_getprior='undef' d_setprior='undef' -d_setlinebuf='undef' -d_setregid='undef' d_setreuid='undef' # -- in /usr/lib/libc.so.1 - - -# Broken C-Shell tests (Thanks to Tye McQueen): -# The OS-specific checks may be obsoleted by the this generic test. - sh_cnt=`sh -c 'echo /*' | wc -c` - csh_cnt=`csh -f -c 'glob /*' 2>/dev/null | wc -c` - csh_cnt=`expr 1 + $csh_cnt` -if [ "$sh_cnt" -ne "$csh_cnt" ]; then - echo "You're csh has a broken 'glob', disabling..." >&2 - d_csh='undef' -fi - -# Unixware-specific problems. UW7 give correctname with uname -s -# UnixWare has a broken csh. (This might already be detected above). -# Configure can't detect memcpy or memset on Unixware 2 or 7 -# -# Leave leading tabs on the next two lines so Configure doesn't -# propagate these variables to config.sh - uw_ver=`uname -v` - uw_isuw=`uname -s 2>&1` - -if [ "$uw_isuw" = "UnixWare" ]; then - case $uw_ver in - 7.1*) - d_csh='undef' - d_memcpy='define' - d_memset='define' - stdio_cnt='((fp)->__cnt)' - d_stdio_cnt_lval='define' - stdio_ptr='((fp)->__ptr)' - d_stdio_ptr_lval='define' - - d_bcopy='define' # In /usr/lib/libc.so.1 - d_setregid='define' # " - d_setreuid='define' # " - - if [ -f /usr/ccs/lib/libcudk70.a -a "$want_udk70" ] ; then - libswanted=" $libswanted cudk70" - fi - ;; - 7*) - d_csh='undef' - d_memcpy='define' - d_memset='define' - stdio_cnt='((fp)->__cnt)' - d_stdio_cnt_lval='define' - stdio_ptr='((fp)->__ptr)' - d_stdio_ptr_lval='define' - ;; - esac -fi -# End of Unixware-specific tests. - -############################################################### -# Dynamic loading section: Is default so it should just happen. -# set below to explicitly force. -# usedl='define' -# dlext='so' -# dlsrc='dl_dlopen.xs' -# -# ccdlflags : must tell the linker to export all global symbols -# cccdlflags: must tell the compiler to generate relocatable code -# lddlflags : must tell the linker to output a shared library - -# use shared perl lib -useshrplib='true' - -case "$cc" in - *gcc*) - ccdlflags='-Xlinker -Bexport ' - cccdlflags='-fpic' - lddlflags='-G ' - ;; - - *) - ccdlflags='-Wl,-Bexport' - cccdlflags='-Kpic' - lddlflags='-G -Wl,-Bexport' - ;; -esac - -############################################################################ -# Thread support -# use Configure -Dusethreads to enable -# This script UU/usethreads.cbu will get 'called-back' by Configure -# after it has prompted the user for whether to use threads. -cat > UU/usethreads.cbu <<'EOCBU' -case "$usethreads" in -$define|true|[yY]*) - ccflags="$ccflags" - shift - libswanted="$*" - case "$cc" in - *gcc*) - ccflags="-D_REENTRANT $ccflags -fpic -pthread" - cccdlflags='-fpic' - lddlflags='-pthread -G ' - ;; - *) - ccflags="-D_REENTRANT $ccflags -KPIC -Kthread" - ccdlflags='-Kthread -Wl,-Bexport' - cccdlflags='-KPIC -Kthread' - lddlflags='-G -Kthread -Wl,-Bexport ' - ldflags='-Kthread' - ;; - esac -esac -EOCBU - - -d_suidsafe='define' # "./Configure -d" can't figure this out easily - -################## final caveat msgs to builder ############### -cat <<'EOM' >&4 - -If you wish to use dynamic linking, you must use - LD_LIBRARY_PATH=`pwd`; export LD_LIBRARY_PATH -or - setenv LD_LIBRARY_PATH `pwd` -before running make. - -If you are using shared libraries from /usr/local/lib -for libdbm or libgdbm you may need to set - LD_RUN_PATH=/usr/local/lib; export LD_RUN_PATH -in order for Configure to compile the simple test program - -EOM |
