diff options
Diffstat (limited to 'contrib/perl5/config_h.SH')
| -rwxr-xr-x | contrib/perl5/config_h.SH | 3238 |
1 files changed, 0 insertions, 3238 deletions
diff --git a/contrib/perl5/config_h.SH b/contrib/perl5/config_h.SH deleted file mode 100755 index ae7f337..0000000 --- a/contrib/perl5/config_h.SH +++ /dev/null @@ -1,3238 +0,0 @@ -case $CONFIG in -'') - if test -f config.sh; then TOP=.; - elif test -f ../config.sh; then TOP=..; - elif test -f ../../config.sh; then TOP=../..; - elif test -f ../../../config.sh; then TOP=../../..; - elif test -f ../../../../config.sh; then TOP=../../../..; - else - echo "Can't find config.sh."; exit 1 - fi - . $TOP/config.sh - ;; -esac -case "$0" in -*/*) cd `expr X$0 : 'X\(.*\)/'` ;; -esac -echo "Extracting config.h (with variable substitutions)" -sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-def!#undef!' -/* - * This file was produced by running the config_h.SH script, which - * gets its values from config.sh, which is generally produced by - * running Configure. - * - * Feel free to modify any of this as the need arises. Note, however, - * that running config_h.SH again will wipe out any changes you've made. - * For a more permanent change edit config.sh and rerun config_h.SH. - * - * \$Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $ - */ - -/* - * Package name : $package - * Source directory : $src - * Configuration time: $cf_time - * Configured by : $cf_by - * Target system : $myuname - */ - -#ifndef _config_h_ -#define _config_h_ - -/* LOC_SED: - * This symbol holds the complete pathname to the sed program. - */ -#define LOC_SED "$full_sed" /**/ - -/* HAS_ALARM: - * This symbol, if defined, indicates that the alarm routine is - * available. - */ -#$d_alarm HAS_ALARM /**/ - -/* HASATTRIBUTE: - * This symbol indicates the C compiler can check for function attributes, - * such as printf formats. This is normally only supported by GNU cc. - */ -#$d_attribut HASATTRIBUTE /**/ -#ifndef HASATTRIBUTE -#define __attribute__(_arg_) -#endif - -/* HAS_BCMP: - * This symbol is defined if the bcmp() routine is available to - * compare blocks of memory. - */ -#$d_bcmp HAS_BCMP /**/ - -/* HAS_BCOPY: - * This symbol is defined if the bcopy() routine is available to - * copy blocks of memory. - */ -#$d_bcopy HAS_BCOPY /**/ - -/* HAS_BZERO: - * This symbol is defined if the bzero() routine is available to - * set a memory block to 0. - */ -#$d_bzero HAS_BZERO /**/ - -/* HAS_CHOWN: - * This symbol, if defined, indicates that the chown routine is - * available. - */ -#$d_chown HAS_CHOWN /**/ - -/* HAS_CHROOT: - * This symbol, if defined, indicates that the chroot routine is - * available. - */ -#$d_chroot HAS_CHROOT /**/ - -/* HAS_CHSIZE: - * This symbol, if defined, indicates that the chsize routine is available - * to truncate files. You might need a -lx to get this routine. - */ -#$d_chsize HAS_CHSIZE /**/ - -/* HASCONST: - * This symbol, if defined, indicates that this C compiler knows about - * the const type. There is no need to actually test for that symbol - * within your programs. The mere use of the "const" keyword will - * trigger the necessary tests. - */ -#$d_const HASCONST /**/ -#ifndef HASCONST -#define const -#endif - -/* HAS_CRYPT: - * This symbol, if defined, indicates that the crypt routine is available - * to encrypt passwords and the like. - */ -#$d_crypt HAS_CRYPT /**/ - -/* HAS_CUSERID: - * This symbol, if defined, indicates that the cuserid routine is - * available to get character login names. - */ -#$d_cuserid HAS_CUSERID /**/ - -/* HAS_DBL_DIG: - * This symbol, if defined, indicates that this system's <float.h> - * or <limits.h> defines the symbol DBL_DIG, which is the number - * of significant digits in a double precision number. If this - * symbol is not defined, a guess of 15 is usually pretty good. - */ -#$d_dbl_dig HAS_DBL_DIG /* */ - -/* HAS_DIFFTIME: - * This symbol, if defined, indicates that the difftime routine is - * available. - */ -#$d_difftime HAS_DIFFTIME /**/ - -/* HAS_DLERROR: - * This symbol, if defined, indicates that the dlerror routine is - * available to return a string describing the last error that - * occurred from a call to dlopen(), dlclose() or dlsym(). - */ -#$d_dlerror HAS_DLERROR /**/ - -/* SETUID_SCRIPTS_ARE_SECURE_NOW: - * This symbol, if defined, indicates that the bug that prevents - * setuid scripts from being secure is not present in this kernel. - */ -/* DOSUID: - * This symbol, if defined, indicates that the C program should - * check the script that it is executing for setuid/setgid bits, and - * attempt to emulate setuid/setgid on systems that have disabled - * setuid #! scripts because the kernel can't do it securely. - * It is up to the package designer to make sure that this emulation - * is done securely. Among other things, it should do an fstat on - * the script it just opened to make sure it really is a setuid/setgid - * script, it should make sure the arguments passed correspond exactly - * to the argument on the #! line, and it should not trust any - * subprocesses to which it must pass the filename rather than the - * file descriptor of the script to be executed. - */ -#$d_suidsafe SETUID_SCRIPTS_ARE_SECURE_NOW /**/ -#$d_dosuid DOSUID /**/ - -/* HAS_DUP2: - * This symbol, if defined, indicates that the dup2 routine is - * available to duplicate file descriptors. - */ -#$d_dup2 HAS_DUP2 /**/ - -/* HAS_FCHMOD: - * This symbol, if defined, indicates that the fchmod routine is available - * to change mode of opened files. If unavailable, use chmod(). - */ -#$d_fchmod HAS_FCHMOD /**/ - -/* HAS_FCHOWN: - * This symbol, if defined, indicates that the fchown routine is available - * to change ownership of opened files. If unavailable, use chown(). - */ -#$d_fchown HAS_FCHOWN /**/ - -/* HAS_FCNTL: - * This symbol, if defined, indicates to the C program that - * the fcntl() function exists. - */ -#$d_fcntl HAS_FCNTL /**/ - -/* HAS_FGETPOS: - * This symbol, if defined, indicates that the fgetpos routine is - * available to get the file position indicator, similar to ftell(). - */ -#$d_fgetpos HAS_FGETPOS /**/ - -/* HAS_FLOCK: - * This symbol, if defined, indicates that the flock routine is - * available to do file locking. - */ -#$d_flock HAS_FLOCK /**/ - -/* HAS_FORK: - * This symbol, if defined, indicates that the fork routine is - * available. - */ -#$d_fork HAS_FORK /**/ - -/* HAS_FSETPOS: - * This symbol, if defined, indicates that the fsetpos routine is - * available to set the file position indicator, similar to fseek(). - */ -#$d_fsetpos HAS_FSETPOS /**/ - -/* HAS_GETTIMEOFDAY: - * This symbol, if defined, indicates that the gettimeofday() system - * call is available for a sub-second accuracy clock. Usually, the file - * <sys/resource.h> needs to be included (see I_SYS_RESOURCE). - * The type "Timeval" should be used to refer to "struct timeval". - */ -#$d_gettimeod HAS_GETTIMEOFDAY /**/ -#ifdef HAS_GETTIMEOFDAY -#define Timeval struct timeval /* Structure used by gettimeofday() */ -#endif - -/* HAS_GETGROUPS: - * This symbol, if defined, indicates that the getgroups() routine is - * available to get the list of process groups. If unavailable, multiple - * groups are probably not supported. - */ -#$d_getgrps HAS_GETGROUPS /**/ - -/* HAS_GETLOGIN: - * This symbol, if defined, indicates that the getlogin routine is - * available to get the login name. - */ -#$d_getlogin HAS_GETLOGIN /**/ - -/* HAS_GETPGID: - * This symbol, if defined, indicates to the C program that - * the getpgid(pid) function is available to get the - * process group id. - */ -#$d_getpgid HAS_GETPGID /**/ - -/* HAS_GETPGRP2: - * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) - * routine is available to get the current process group. - */ -#$d_getpgrp2 HAS_GETPGRP2 /**/ - -/* HAS_GETPPID: - * This symbol, if defined, indicates that the getppid routine is - * available to get the parent process ID. - */ -#$d_getppid HAS_GETPPID /**/ - -/* HAS_GETPRIORITY: - * This symbol, if defined, indicates that the getpriority routine is - * available to get a process's priority. - */ -#$d_getprior HAS_GETPRIORITY /**/ - -/* HAS_INET_ATON: - * This symbol, if defined, indicates to the C program that the - * inet_aton() function is available to parse IP address "dotted-quad" - * strings. - */ -#$d_inetaton HAS_INET_ATON /**/ - -/* HAS_KILLPG: - * This symbol, if defined, indicates that the killpg routine is available - * to kill process groups. If unavailable, you probably should use kill - * with a negative process number. - */ -#$d_killpg HAS_KILLPG /**/ - -/* HAS_LINK: - * This symbol, if defined, indicates that the link routine is - * available to create hard links. - */ -#$d_link HAS_LINK /**/ - -/* HAS_LOCALECONV: - * This symbol, if defined, indicates that the localeconv routine is - * available for numeric and monetary formatting conventions. - */ -#$d_locconv HAS_LOCALECONV /**/ - -/* HAS_LOCKF: - * This symbol, if defined, indicates that the lockf routine is - * available to do file locking. - */ -#$d_lockf HAS_LOCKF /**/ - -/* HAS_LSTAT: - * This symbol, if defined, indicates that the lstat routine is - * available to do file stats on symbolic links. - */ -#$d_lstat HAS_LSTAT /**/ - -/* HAS_MBLEN: - * This symbol, if defined, indicates that the mblen routine is available - * to find the number of bytes in a multibye character. - */ -#$d_mblen HAS_MBLEN /**/ - -/* HAS_MBSTOWCS: - * This symbol, if defined, indicates that the mbstowcs routine is - * available to covert a multibyte string into a wide character string. - */ -#$d_mbstowcs HAS_MBSTOWCS /**/ - -/* HAS_MBTOWC: - * This symbol, if defined, indicates that the mbtowc routine is available - * to covert a multibyte to a wide character. - */ -#$d_mbtowc HAS_MBTOWC /**/ - -/* HAS_MEMCMP: - * This symbol, if defined, indicates that the memcmp routine is available - * to compare blocks of memory. - */ -#$d_memcmp HAS_MEMCMP /**/ - -/* HAS_MEMCPY: - * This symbol, if defined, indicates that the memcpy routine is available - * to copy blocks of memory. - */ -#$d_memcpy HAS_MEMCPY /**/ - -/* HAS_MEMMOVE: - * This symbol, if defined, indicates that the memmove routine is available - * to copy potentially overlapping blocks of memory. This should be used - * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your - * own version. - */ -#$d_memmove HAS_MEMMOVE /**/ - -/* HAS_MEMSET: - * This symbol, if defined, indicates that the memset routine is available - * to set blocks of memory. - */ -#$d_memset HAS_MEMSET /**/ - -/* HAS_MKDIR: - * This symbol, if defined, indicates that the mkdir routine is available - * to create directories. Otherwise you should fork off a new process to - * exec /bin/mkdir. - */ -#$d_mkdir HAS_MKDIR /**/ - -/* HAS_MKFIFO: - * This symbol, if defined, indicates that the mkfifo routine is - * available to create FIFOs. Otherwise, mknod should be able to - * do it for you. However, if mkfifo is there, mknod might require - * super-user privileges which mkfifo will not. - */ -#$d_mkfifo HAS_MKFIFO /**/ - -/* HAS_MKTIME: - * This symbol, if defined, indicates that the mktime routine is - * available. - */ -#$d_mktime HAS_MKTIME /**/ - -/* HAS_MSYNC: - * This symbol, if defined, indicates that the msync system call is - * available to synchronize a mapped file. - */ -#$d_msync HAS_MSYNC /**/ - -/* HAS_MUNMAP: - * This symbol, if defined, indicates that the munmap system call is - * available to unmap a region, usually mapped by mmap(). - */ -#$d_munmap HAS_MUNMAP /**/ - -/* HAS_NICE: - * This symbol, if defined, indicates that the nice routine is - * available. - */ -#$d_nice HAS_NICE /**/ - -/* HAS_PATHCONF: - * This symbol, if defined, indicates that pathconf() is available - * to determine file-system related limits and options associated - * with a given filename. - */ -/* HAS_FPATHCONF: - * This symbol, if defined, indicates that pathconf() is available - * to determine file-system related limits and options associated - * with a given open file descriptor. - */ -#$d_pathconf HAS_PATHCONF /**/ -#$d_fpathconf HAS_FPATHCONF /**/ - -/* HAS_PAUSE: - * This symbol, if defined, indicates that the pause routine is - * available to suspend a process until a signal is received. - */ -#$d_pause HAS_PAUSE /**/ - -/* HAS_PIPE: - * This symbol, if defined, indicates that the pipe routine is - * available to create an inter-process channel. - */ -#$d_pipe HAS_PIPE /**/ - -/* HAS_POLL: - * This symbol, if defined, indicates that the poll routine is - * available to poll active file descriptors. You may safely - * include <poll.h> when this symbol is defined. - */ -#$d_poll HAS_POLL /**/ - -/* HAS_READDIR: - * This symbol, if defined, indicates that the readdir routine is - * available to read directory entries. You may have to include - * <dirent.h>. See I_DIRENT. - */ -#$d_readdir HAS_READDIR /**/ - -/* HAS_SEEKDIR: - * This symbol, if defined, indicates that the seekdir routine is - * available. You may have to include <dirent.h>. See I_DIRENT. - */ -#$d_seekdir HAS_SEEKDIR /**/ - -/* HAS_TELLDIR: - * This symbol, if defined, indicates that the telldir routine is - * available. You may have to include <dirent.h>. See I_DIRENT. - */ -#$d_telldir HAS_TELLDIR /**/ - -/* HAS_REWINDDIR: - * This symbol, if defined, indicates that the rewinddir routine is - * available. You may have to include <dirent.h>. See I_DIRENT. - */ -#$d_rewinddir HAS_REWINDDIR /**/ - -/* HAS_READLINK: - * This symbol, if defined, indicates that the readlink routine is - * available to read the value of a symbolic link. - */ -#$d_readlink HAS_READLINK /**/ - -/* HAS_RENAME: - * This symbol, if defined, indicates that the rename routine is available - * to rename files. Otherwise you should do the unlink(), link(), unlink() - * trick. - */ -#$d_rename HAS_RENAME /**/ - -/* HAS_RMDIR: - * This symbol, if defined, indicates that the rmdir routine is - * available to remove directories. Otherwise you should fork off a - * new process to exec /bin/rmdir. - */ -#$d_rmdir HAS_RMDIR /**/ - -/* HAS_SELECT: - * This symbol, if defined, indicates that the select routine is - * available to select active file descriptors. If the timeout field - * is used, <sys/time.h> may need to be included. - */ -#$d_select HAS_SELECT /**/ - -/* HAS_SETEGID: - * This symbol, if defined, indicates that the setegid routine is available - * to change the effective gid of the current program. - */ -#$d_setegid HAS_SETEGID /**/ - -/* HAS_SETEUID: - * This symbol, if defined, indicates that the seteuid routine is available - * to change the effective uid of the current program. - */ -#$d_seteuid HAS_SETEUID /**/ - -/* HAS_SETLINEBUF: - * This symbol, if defined, indicates that the setlinebuf routine is - * available to change stderr or stdout from block-buffered or unbuffered - * to a line-buffered mode. - */ -#$d_setlinebuf HAS_SETLINEBUF /**/ - -/* HAS_SETLOCALE: - * This symbol, if defined, indicates that the setlocale routine is - * available to handle locale-specific ctype implementations. - */ -#$d_setlocale HAS_SETLOCALE /**/ - -/* HAS_SETPGID: - * This symbol, if defined, indicates that the setpgid(pid, gpid) - * routine is available to set process group ID. - */ -#$d_setpgid HAS_SETPGID /**/ - -/* HAS_SETPGRP2: - * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) - * routine is available to set the current process group. - */ -#$d_setpgrp2 HAS_SETPGRP2 /**/ - -/* HAS_SETPRIORITY: - * This symbol, if defined, indicates that the setpriority routine is - * available to set a process's priority. - */ -#$d_setprior HAS_SETPRIORITY /**/ - -/* HAS_SETREGID: - * This symbol, if defined, indicates that the setregid routine is - * available to change the real and effective gid of the current - * process. - */ -/* HAS_SETRESGID: - * This symbol, if defined, indicates that the setresgid routine is - * available to change the real, effective and saved gid of the current - * process. - */ -#$d_setregid HAS_SETREGID /**/ -#$d_setresgid HAS_SETRESGID /**/ - -/* HAS_SETREUID: - * This symbol, if defined, indicates that the setreuid routine is - * available to change the real and effective uid of the current - * process. - */ -/* HAS_SETRESUID: - * This symbol, if defined, indicates that the setresuid routine is - * available to change the real, effective and saved uid of the current - * process. - */ -#$d_setreuid HAS_SETREUID /**/ -#$d_setresuid HAS_SETRESUID /**/ - -/* HAS_SETRGID: - * This symbol, if defined, indicates that the setrgid routine is available - * to change the real gid of the current program. - */ -#$d_setrgid HAS_SETRGID /**/ - -/* HAS_SETRUID: - * This symbol, if defined, indicates that the setruid routine is available - * to change the real uid of the current program. - */ -#$d_setruid HAS_SETRUID /**/ - -/* HAS_SETSID: - * This symbol, if defined, indicates that the setsid routine is - * available to set the process group ID. - */ -#$d_setsid HAS_SETSID /**/ - -/* Shmat_t: - * This symbol holds the return type of the shmat() system call. - * Usually set to 'void *' or 'char *'. - */ -/* HAS_SHMAT_PROTOTYPE: - * This symbol, if defined, indicates that the sys/shm.h includes - * a prototype for shmat(). Otherwise, it is up to the program to - * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess, - * but not always right so it should be emitted by the program only - * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. - */ -#define Shmat_t $shmattype /**/ -#$d_shmatprototype HAS_SHMAT_PROTOTYPE /**/ - -/* HAS_STRCHR: - * This symbol is defined to indicate that the strchr()/strrchr() - * functions are available for string searching. If not, try the - * index()/rindex() pair. - */ -/* HAS_INDEX: - * This symbol is defined to indicate that the index()/rindex() - * functions are available for string searching. - */ -#$d_strchr HAS_STRCHR /**/ -#$d_index HAS_INDEX /**/ - -/* HAS_STRCOLL: - * This symbol, if defined, indicates that the strcoll routine is - * available to compare strings using collating information. - */ -#$d_strcoll HAS_STRCOLL /**/ - -/* USE_STRUCT_COPY: - * This symbol, if defined, indicates that this C compiler knows how - * to copy structures. If undefined, you'll need to use a block copy - * routine of some sort instead. - */ -#$d_strctcpy USE_STRUCT_COPY /**/ - -/* HAS_STRTOD: - * This symbol, if defined, indicates that the strtod routine is - * available to provide better numeric string conversion than atof(). - */ -#$d_strtod HAS_STRTOD /**/ - -/* HAS_STRTOL: - * This symbol, if defined, indicates that the strtol routine is available - * to provide better numeric string conversion than atoi() and friends. - */ -#$d_strtol HAS_STRTOL /**/ - -/* HAS_STRTOUL: - * This symbol, if defined, indicates that the strtoul routine is - * available to provide conversion of strings to unsigned long. - */ -#$d_strtoul HAS_STRTOUL /**/ - -/* HAS_STRXFRM: - * This symbol, if defined, indicates that the strxfrm() routine is - * available to transform strings. - */ -#$d_strxfrm HAS_STRXFRM /**/ - -/* HAS_SYMLINK: - * This symbol, if defined, indicates that the symlink routine is available - * to create symbolic links. - */ -#$d_symlink HAS_SYMLINK /**/ - -/* HAS_SYSCALL: - * This symbol, if defined, indicates that the syscall routine is - * available to call arbitrary system calls. If undefined, that's tough. - */ -#$d_syscall HAS_SYSCALL /**/ - -/* HAS_SYSCONF: - * This symbol, if defined, indicates that sysconf() is available - * to determine system related limits and options. - */ -#$d_sysconf HAS_SYSCONF /**/ - -/* HAS_SYSTEM: - * This symbol, if defined, indicates that the system routine is - * available to issue a shell command. - */ -#$d_system HAS_SYSTEM /**/ - -/* HAS_TCGETPGRP: - * This symbol, if defined, indicates that the tcgetpgrp routine is - * available to get foreground process group ID. - */ -#$d_tcgetpgrp HAS_TCGETPGRP /**/ - -/* HAS_TCSETPGRP: - * This symbol, if defined, indicates that the tcsetpgrp routine is - * available to set foreground process group ID. - */ -#$d_tcsetpgrp HAS_TCSETPGRP /**/ - -/* HAS_TRUNCATE: - * This symbol, if defined, indicates that the truncate routine is - * available to truncate files. - */ -#$d_truncate HAS_TRUNCATE /**/ - -/* HAS_TZNAME: - * This symbol, if defined, indicates that the tzname[] array is - * available to access timezone names. - */ -#$d_tzname HAS_TZNAME /**/ - -/* HAS_UMASK: - * This symbol, if defined, indicates that the umask routine is - * available to set and get the value of the file creation mask. - */ -#$d_umask HAS_UMASK /**/ - -/* HASVOLATILE: - * This symbol, if defined, indicates that this C compiler knows about - * the volatile declaration. - */ -#$d_volatile HASVOLATILE /**/ -#ifndef HASVOLATILE -#define volatile -#endif - -/* HAS_WAIT4: - * This symbol, if defined, indicates that wait4() exists. - */ -#$d_wait4 HAS_WAIT4 /**/ - -/* HAS_WAITPID: - * This symbol, if defined, indicates that the waitpid routine is - * available to wait for child process. - */ -#$d_waitpid HAS_WAITPID /**/ - -/* HAS_WCSTOMBS: - * This symbol, if defined, indicates that the wcstombs routine is - * available to convert wide character strings to multibyte strings. - */ -#$d_wcstombs HAS_WCSTOMBS /**/ - -/* HAS_WCTOMB: - * This symbol, if defined, indicates that the wctomb routine is available - * to covert a wide character to a multibyte. - */ -#$d_wctomb HAS_WCTOMB /**/ - -/* I_ARPA_INET: - * This symbol, if defined, indicates to the C program that it should - * include <arpa/inet.h> to get inet_addr and friends declarations. - */ -#$i_arpainet I_ARPA_INET /**/ - -/* I_DBM: - * This symbol, if defined, indicates that <dbm.h> exists and should - * be included. - */ -/* I_RPCSVC_DBM: - * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and - * should be included. - */ -#$i_dbm I_DBM /**/ -#$i_rpcsvcdbm I_RPCSVC_DBM /**/ - -/* I_DIRENT: - * This symbol, if defined, indicates to the C program that it should - * include <dirent.h>. Using this symbol also triggers the definition - * of the Direntry_t define which ends up being 'struct dirent' or - * 'struct direct' depending on the availability of <dirent.h>. - */ -/* DIRNAMLEN: - * This symbol, if defined, indicates to the C program that the length - * of directory entry names is provided by a d_namlen field. Otherwise - * you need to do strlen() on the d_name field. - */ -/* Direntry_t: - * This symbol is set to 'struct direct' or 'struct dirent' depending on - * whether dirent is available or not. You should use this pseudo type to - * portably declare your directory entries. - */ -#$i_dirent I_DIRENT /**/ -#$d_dirnamlen DIRNAMLEN /**/ -#define Direntry_t $direntrytype - -/* I_DLFCN: - * This symbol, if defined, indicates that <dlfcn.h> exists and should - * be included. - */ -#$i_dlfcn I_DLFCN /**/ - -/* I_FCNTL: - * This manifest constant tells the C program to include <fcntl.h>. - */ -#$i_fcntl I_FCNTL /**/ - -/* I_FLOAT: - * This symbol, if defined, indicates to the C program that it should - * include <float.h> to get definition of symbols like DBL_MAX or - * DBL_MIN, i.e. machine dependent floating point values. - */ -#$i_float I_FLOAT /**/ - -/* I_LIMITS: - * This symbol, if defined, indicates to the C program that it should - * include <limits.h> to get definition of symbols like WORD_BIT or - * LONG_MAX, i.e. machine dependant limitations. - */ -#$i_limits I_LIMITS /**/ - -/* I_LOCALE: - * This symbol, if defined, indicates to the C program that it should - * include <locale.h>. - */ -#$i_locale I_LOCALE /**/ - -/* I_MATH: - * This symbol, if defined, indicates to the C program that it should - * include <math.h>. - */ -#$i_math I_MATH /**/ - -/* I_MEMORY: - * This symbol, if defined, indicates to the C program that it should - * include <memory.h>. - */ -#$i_memory I_MEMORY /**/ - -/* I_NDBM: - * This symbol, if defined, indicates that <ndbm.h> exists and should - * be included. - */ -#$i_ndbm I_NDBM /**/ - -/* I_NET_ERRNO: - * This symbol, if defined, indicates that <net/errno.h> exists and - * should be included. - */ -#$i_neterrno I_NET_ERRNO /**/ - -/* I_NETINET_IN: - * This symbol, if defined, indicates to the C program that it should - * include <netinet/in.h>. Otherwise, you may try <sys/in.h>. - */ -#$i_niin I_NETINET_IN /**/ - -/* I_SFIO: - * This symbol, if defined, indicates to the C program that it should - * include <sfio.h>. - */ -#$i_sfio I_SFIO /**/ - -/* I_STDDEF: - * This symbol, if defined, indicates that <stddef.h> exists and should - * be included. - */ -#$i_stddef I_STDDEF /**/ - -/* I_STDLIB: - * This symbol, if defined, indicates that <stdlib.h> exists and should - * be included. - */ -#$i_stdlib I_STDLIB /**/ - -/* I_STRING: - * This symbol, if defined, indicates to the C program that it should - * include <string.h> (USG systems) instead of <strings.h> (BSD systems). - */ -#$i_string I_STRING /**/ - -/* I_SYS_DIR: - * This symbol, if defined, indicates to the C program that it should - * include <sys/dir.h>. - */ -#$i_sysdir I_SYS_DIR /**/ - -/* I_SYS_FILE: - * This symbol, if defined, indicates to the C program that it should - * include <sys/file.h> to get definition of R_OK and friends. - */ -#$i_sysfile I_SYS_FILE /**/ - -/* I_SYS_IOCTL: - * This symbol, if defined, indicates that <sys/ioctl.h> exists and should - * be included. Otherwise, include <sgtty.h> or <termio.h>. - */ -#$i_sysioctl I_SYS_IOCTL /**/ - -/* I_SYS_NDIR: - * This symbol, if defined, indicates to the C program that it should - * include <sys/ndir.h>. - */ -#$i_sysndir I_SYS_NDIR /**/ - -/* I_SYS_PARAM: - * This symbol, if defined, indicates to the C program that it should - * include <sys/param.h>. - */ -#$i_sysparam I_SYS_PARAM /**/ - -/* I_SYS_RESOURCE: - * This symbol, if defined, indicates to the C program that it should - * include <sys/resource.h>. - */ -#$i_sysresrc I_SYS_RESOURCE /**/ - -/* I_SYS_SELECT: - * This symbol, if defined, indicates to the C program that it should - * include <sys/select.h> in order to get definition of struct timeval. - */ -#$i_sysselct I_SYS_SELECT /**/ - -/* I_SYS_STAT: - * This symbol, if defined, indicates to the C program that it should - * include <sys/stat.h>. - */ -#$i_sysstat I_SYS_STAT /**/ - -/* I_SYS_TIMES: - * This symbol, if defined, indicates to the C program that it should - * include <sys/times.h>. - */ -#$i_systimes I_SYS_TIMES /**/ - -/* I_SYS_TYPES: - * This symbol, if defined, indicates to the C program that it should - * include <sys/types.h>. - */ -#$i_systypes I_SYS_TYPES /**/ - -/* I_SYS_UN: - * This symbol, if defined, indicates to the C program that it should - * include <sys/un.h> to get UNIX domain socket definitions. - */ -#$i_sysun I_SYS_UN /**/ - -/* I_SYS_WAIT: - * This symbol, if defined, indicates to the C program that it should - * include <sys/wait.h>. - */ -#$i_syswait I_SYS_WAIT /**/ - -/* I_TERMIO: - * This symbol, if defined, indicates that the program should include - * <termio.h> rather than <sgtty.h>. There are also differences in - * the ioctl() calls that depend on the value of this symbol. - */ -/* I_TERMIOS: - * This symbol, if defined, indicates that the program should include - * the POSIX termios.h rather than sgtty.h or termio.h. - * There are also differences in the ioctl() calls that depend on the - * value of this symbol. - */ -/* I_SGTTY: - * This symbol, if defined, indicates that the program should include - * <sgtty.h> rather than <termio.h>. There are also differences in - * the ioctl() calls that depend on the value of this symbol. - */ -#$i_termio I_TERMIO /**/ -#$i_termios I_TERMIOS /**/ -#$i_sgtty I_SGTTY /**/ - -/* I_UNISTD: - * This symbol, if defined, indicates to the C program that it should - * include <unistd.h>. - */ -#$i_unistd I_UNISTD /**/ - -/* I_UTIME: - * This symbol, if defined, indicates to the C program that it should - * include <utime.h>. - */ -#$i_utime I_UTIME /**/ - -/* I_VALUES: - * This symbol, if defined, indicates to the C program that it should - * include <values.h> to get definition of symbols like MINFLOAT or - * MAXLONG, i.e. machine dependant limitations. Probably, you - * should use <limits.h> instead, if it is available. - */ -#$i_values I_VALUES /**/ - -/* I_STDARG: - * This symbol, if defined, indicates that <stdarg.h> exists and should - * be included. - */ -/* I_VARARGS: - * This symbol, if defined, indicates to the C program that it should - * include <varargs.h>. - */ -#$i_stdarg I_STDARG /**/ -#$i_varargs I_VARARGS /**/ - -/* I_VFORK: - * This symbol, if defined, indicates to the C program that it should - * include vfork.h. - */ -#$i_vfork I_VFORK /**/ - -/* CAN_PROTOTYPE: - * If defined, this macro indicates that the C compiler can handle - * function prototypes. - */ -/* _: - * This macro is used to declare function parameters for folks who want - * to make declarations with prototypes using a different style than - * the above macros. Use double parentheses. For example: - * - * int main _((int argc, char *argv[])); - */ -#$prototype CAN_PROTOTYPE /**/ -#ifdef CAN_PROTOTYPE -#define _(args) args -#else -#define _(args) () -#endif - -/* SH_PATH: - * This symbol contains the full pathname to the shell used on this - * on this system to execute Bourne shell scripts. Usually, this will be - * /bin/sh, though it's possible that some systems will have /bin/ksh, - * /bin/pdksh, /bin/ash, /bin/bash, or even something such as - * D:/bin/sh.exe. - */ -#define SH_PATH "$sh" /**/ - -/* CROSSCOMPILE: - * This symbol, if defined, signifies that we our - * build process is a cross-compilation. - */ -#$crosscompile CROSSCOMPILE /**/ - -/* INTSIZE: - * This symbol contains the value of sizeof(int) so that the C - * preprocessor can make decisions based on it. - */ -/* LONGSIZE: - * This symbol contains the value of sizeof(long) so that the C - * preprocessor can make decisions based on it. - */ -/* SHORTSIZE: - * This symbol contains the value of sizeof(short) so that the C - * preprocessor can make decisions based on it. - */ -#define INTSIZE $intsize /**/ -#define LONGSIZE $longsize /**/ -#define SHORTSIZE $shortsize /**/ - -/* MULTIARCH: - * This symbol, if defined, signifies that the build - * process will produce some binary files that are going to be - * used in a cross-platform environment. This is the case for - * example with the NeXT "fat" binaries that contain executables - * for several CPUs. - */ -#$multiarch MULTIARCH /**/ - -/* HAS_QUAD: - * This symbol, if defined, tells that there's a 64-bit integer type, - * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one - * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T. - */ -#$d_quad HAS_QUAD /**/ -#ifdef HAS_QUAD -# define Quad_t $quadtype /**/ -# define Uquad_t $uquadtype /**/ -# define QUADKIND $quadkind /**/ -# define QUAD_IS_INT 1 -# define QUAD_IS_LONG 2 -# define QUAD_IS_LONG_LONG 3 -# define QUAD_IS_INT64_T 4 -#endif - -/* HAS_ACCESSX: - * This symbol, if defined, indicates that the accessx routine is - * available to do extended access checks. - */ -#$d_accessx HAS_ACCESSX /**/ - -/* HAS_EACCESS: - * This symbol, if defined, indicates that the eaccess routine is - * available to do extended access checks. - */ -#$d_eaccess HAS_EACCESS /**/ - -/* I_SYS_ACCESS: - * This symbol, if defined, indicates to the C program that it should - * include <sys/access.h>. - */ -#$i_sysaccess I_SYS_ACCESS /**/ - -/* I_SYS_SECURITY: - * This symbol, if defined, indicates to the C program that it should - * include <sys/security.h>. - */ -#$i_syssecrt I_SYS_SECURITY /**/ - -/* OSNAME: - * This symbol contains the name of the operating system, as determined - * by Configure. You shouldn't rely on it too much; the specific - * feature tests from Configure are generally more reliable. - */ -#define OSNAME "$osname" /**/ - -/* MEM_ALIGNBYTES: - * This symbol contains the number of bytes required to align a - * double, or a long double when applicable. Usual values are 2, - * 4 and 8. The default is eight, for safety. - */ -#if defined(CROSSCOMPILE) || defined(MULTIARCH) -# define MEM_ALIGNBYTES 8 -#else -#define MEM_ALIGNBYTES $alignbytes -#endif - -/* ARCHLIB: - * This variable, if defined, holds the name of the directory in - * which the user wants to put architecture-dependent public - * library files for $package. It is most often a local directory - * such as /usr/local/lib. Programs using this variable must be - * prepared to deal with filename expansion. If ARCHLIB is the - * same as PRIVLIB, it is not defined, since presumably the - * program already searches PRIVLIB. - */ -/* ARCHLIB_EXP: - * This symbol contains the ~name expanded version of ARCHLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -#$d_archlib ARCHLIB "$archlib" /**/ -#$d_archlib ARCHLIB_EXP "$archlibexp" /**/ - -/* ARCHNAME: - * This symbol holds a string representing the architecture name. - * It may be used to construct an architecture-dependant pathname - * where library files may be held under a private library, for - * instance. - */ -#define ARCHNAME "$archname" /**/ - -/* HAS_ATOLF: - * This symbol, if defined, indicates that the atolf routine is - * available to convert strings into long doubles. - */ -#$d_atolf HAS_ATOLF /**/ - -/* HAS_ATOLL: - * This symbol, if defined, indicates that the atoll routine is - * available to convert strings into long longs. - */ -#$d_atoll HAS_ATOLL /**/ - -/* BIN: - * This symbol holds the path of the bin directory where the package will - * be installed. Program must be prepared to deal with ~name substitution. - */ -/* BIN_EXP: - * This symbol is the filename expanded version of the BIN symbol, for - * programs that do not want to deal with that at run-time. - */ -#define BIN "$bin" /**/ -#define BIN_EXP "$binexp" /**/ - -/* PERL_BINCOMPAT_5005: - * This symbol, if defined, indicates that this version of Perl should be - * binary-compatible with Perl 5.005. This is impossible for builds - * that use features like threads and multiplicity it is always $undef - * for those versions. - */ -#$d_bincompat5005 PERL_BINCOMPAT_5005 /**/ - -/* BYTEORDER: - * This symbol holds the hexadecimal constant defined in byteorder, - * i.e. 0x1234 or 0x4321, etc... - * If the compiler supports cross-compiling or multiple-architecture - * binaries (eg. on NeXT systems), use compiler-defined macros to - * determine the byte order. - * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture - * Binaries (MAB) on either big endian or little endian machines. - * The endian-ness is available at compile-time. This only matters - * for perl, where the config.h can be generated and installed on - * one system, and used by a different architecture to build an - * extension. Older versions of NeXT that might not have - * defined either *_ENDIAN__ were all on Motorola 680x0 series, - * so the default case (for NeXT) is big endian to catch them. - * This might matter for NeXT 3.0. - */ -#if defined(CROSSCOMPILE) || defined(MULTIARCH) -# ifdef __LITTLE_ENDIAN__ -# if LONGSIZE == 4 -# define BYTEORDER 0x1234 -# else -# if LONGSIZE == 8 -# define BYTEORDER 0x12345678 -# endif -# endif -# else -# ifdef __BIG_ENDIAN__ -# if LONGSIZE == 4 -# define BYTEORDER 0x4321 -# else -# if LONGSIZE == 8 -# define BYTEORDER 0x87654321 -# endif -# endif -# endif -# endif -# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__)) -# define BYTEORDER 0x4321 -# endif -#else -#define BYTEORDER 0x$byteorder /* large digits for MSB */ -#endif /* NeXT */ - -/* CAT2: - * This macro catenates 2 tokens together. - */ -/* STRINGIFY: - * This macro surrounds its token with double quotes. - */ -#if $cpp_stuff == 1 -#define CAT2(a,b) a/**/b -#define STRINGIFY(a) "a" - /* If you can get stringification with catify, tell me how! */ -#endif -#if $cpp_stuff == 42 -#define PeRl_CaTiFy(a, b) a ## b -#define PeRl_StGiFy(a) #a -/* the additional level of indirection enables these macros to be - * used as arguments to other macros. See K&R 2nd ed., page 231. */ -#define CAT2(a,b) PeRl_CaTiFy(a,b) -#define StGiFy(a) PeRl_StGiFy(a) -#define STRINGIFY(a) PeRl_StGiFy(a) -#endif -#if $cpp_stuff != 1 && $cpp_stuff != 42 -# include "Bletch: How does this C preprocessor catenate tokens?" -#endif - -/* CPPSTDIN: - * This symbol contains the first part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. Typical value of "cc -E" or "/lib/cpp", but it can also - * call a wrapper. See CPPRUN. - */ -/* CPPMINUS: - * This symbol contains the second part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. This symbol will have the value "-" if CPPSTDIN needs a minus - * to specify standard input, otherwise the value is "". - */ -/* CPPRUN: - * This symbol contains the string which will invoke a C preprocessor on - * the standard input and produce to standard output. It needs to end - * with CPPLAST, after all other preprocessor flags have been specified. - * The main difference with CPPSTDIN is that this program will never be a - * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is - * available directly to the user. Note that it may well be different from - * the preprocessor used to compile the C program. - */ -/* CPPLAST: - * This symbol is intended to be used along with CPPRUN in the same manner - * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "". - */ -#define CPPSTDIN "$cppstdin" -#define CPPMINUS "$cppminus" -#define CPPRUN "$cpprun" -#define CPPLAST "$cpplast" - -/* HAS_ACCESS: - * This manifest constant lets the C program know that the access() - * system call is available to check for accessibility using real UID/GID. - * (always present on UNIX.) - */ -#$d_access HAS_ACCESS /**/ - -/* CASTI32: - * This symbol is defined if the C compiler can cast negative - * or large floating point numbers to 32-bit ints. - */ -#$d_casti32 CASTI32 /**/ - -/* CASTNEGFLOAT: - * This symbol is defined if the C compiler can cast negative - * numbers to unsigned longs, ints and shorts. - */ -/* CASTFLAGS: - * This symbol contains flags that say what difficulties the compiler - * has casting odd floating values to unsigned long: - * 0 = ok - * 1 = couldn't cast < 0 - * 2 = couldn't cast >= 0x80000000 - * 4 = couldn't cast in argument expression list - */ -#$d_castneg CASTNEGFLOAT /**/ -#define CASTFLAGS $castflags /**/ - -/* VOID_CLOSEDIR: - * This symbol, if defined, indicates that the closedir() routine - * does not return a value. - */ -#$d_void_closedir VOID_CLOSEDIR /**/ - -/* HAS_CSH: - * This symbol, if defined, indicates that the C-shell exists. - */ -/* CSH: - * This symbol, if defined, contains the full pathname of csh. - */ -#$d_csh HAS_CSH /**/ -#ifdef HAS_CSH -#define CSH "$full_csh" /**/ -#endif - -/* DLSYM_NEEDS_UNDERSCORE: - * This symbol, if defined, indicates that we need to prepend an - * underscore to the symbol name before calling dlsym(). This only - * makes sense if you *have* dlsym, which we will presume is the - * case if you're using dl_dlopen.xs. - */ -#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/ - -/* HAS_DRAND48_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the drand48() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern double drand48 _((void)); - */ -#$d_drand48proto HAS_DRAND48_PROTO /**/ - -/* HAS_ENDGRENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for finalizing sequential access of the group database. - */ -#$d_endgrent HAS_ENDGRENT /**/ - -/* HAS_ENDHOSTENT: - * This symbol, if defined, indicates that the endhostent() routine is - * available to close whatever was being used for host queries. - */ -#$d_endhent HAS_ENDHOSTENT /**/ - -/* HAS_ENDNETENT: - * This symbol, if defined, indicates that the endnetent() routine is - * available to close whatever was being used for network queries. - */ -#$d_endnent HAS_ENDNETENT /**/ - -/* HAS_ENDPROTOENT: - * This symbol, if defined, indicates that the endprotoent() routine is - * available to close whatever was being used for protocol queries. - */ -#$d_endpent HAS_ENDPROTOENT /**/ - -/* HAS_ENDPWENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for finalizing sequential access of the passwd database. - */ -#$d_endpwent HAS_ENDPWENT /**/ - -/* HAS_ENDSERVENT: - * This symbol, if defined, indicates that the endservent() routine is - * available to close whatever was being used for service queries. - */ -#$d_endsent HAS_ENDSERVENT /**/ - -/* HAS_FD_SET: - * This symbol, when defined, indicates presence of the fd_set typedef - * in <sys/types.h> - */ -#$d_fd_set HAS_FD_SET /**/ - -/* FLEXFILENAMES: - * This symbol, if defined, indicates that the system supports filenames - * longer than 14 characters. - */ -#$d_flexfnam FLEXFILENAMES /**/ - -/* HAS_FPOS64_T: - * This symbol will be defined if the C compiler supports fpos64_t. - */ -#$d_fpos64_t HAS_FPOS64_T /**/ - -/* HAS_FREXPL: - * This symbol, if defined, indicates that the frexpl routine is - * available to break a long double floating-point number into - * a normalized fraction and an integral power of 2. - */ -#$d_frexpl HAS_FREXPL /**/ - -/* HAS_STRUCT_FS_DATA: - * This symbol, if defined, indicates that the struct fs_data - * to do statfs() is supported. - */ -#$d_fs_data_s HAS_STRUCT_FS_DATA /**/ - -/* HAS_FSEEKO: - * This symbol, if defined, indicates that the fseeko routine is - * available to fseek beyond 32 bits (useful for ILP32 hosts). - */ -#$d_fseeko HAS_FSEEKO /**/ - -/* HAS_FSTATFS: - * This symbol, if defined, indicates that the fstatfs routine is - * available to stat filesystems by file descriptors. - */ -#$d_fstatfs HAS_FSTATFS /**/ - -/* HAS_FTELLO: - * This symbol, if defined, indicates that the ftello routine is - * available to ftell beyond 32 bits (useful for ILP32 hosts). - */ -#$d_ftello HAS_FTELLO /**/ - -/* Gconvert: - * This preprocessor macro is defined to convert a floating point - * number to a string without a trailing decimal point. This - * emulates the behavior of sprintf("%g"), but is sometimes much more - * efficient. If gconvert() is not available, but gcvt() drops the - * trailing decimal point, then gcvt() is used. If all else fails, - * a macro using sprintf("%g") is used. Arguments for the Gconvert - * macro are: value, number of digits, whether trailing zeros should - * be retained, and the output buffer. - * Possible values are: - * d_Gconvert='gconvert((x),(n),(t),(b))' - * d_Gconvert='gcvt((x),(n),(b))' - * d_Gconvert='sprintf((b),"%.*g",(n),(x))' - * The last two assume trailing zeros should not be kept. - */ -#define Gconvert(x,n,t,b) $d_Gconvert - -/* HAS_GETCWD: - * This symbol, if defined, indicates that the getcwd routine is - * available to get the current working directory. - */ -#$d_getcwd HAS_GETCWD /**/ - -/* HAS_GETESPWNAM: - * This symbol, if defined, indicates that the getespwnam system call is - * available to retrieve enchanced (shadow) password entries by name. - */ -#$d_getespwnam HAS_GETESPWNAM /**/ - -/* HAS_GETFSSTAT: - * This symbol, if defined, indicates that the getfsstat routine is - * available to stat filesystems in bulk. - */ -#$d_getfsstat HAS_GETFSSTAT /**/ - -/* HAS_GETGRENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for sequential access of the group database. - */ -#$d_getgrent HAS_GETGRENT /**/ - -/* HAS_GETHOSTBYADDR: - * This symbol, if defined, indicates that the gethostbyaddr() routine is - * available to look up hosts by their IP addresses. - */ -#$d_gethbyaddr HAS_GETHOSTBYADDR /**/ - -/* HAS_GETHOSTBYNAME: - * This symbol, if defined, indicates that the gethostbyname() routine is - * available to look up host names in some data base or other. - */ -#$d_gethbyname HAS_GETHOSTBYNAME /**/ - -/* HAS_GETHOSTENT: - * This symbol, if defined, indicates that the gethostent() routine is - * available to look up host names in some data base or another. - */ -#$d_gethent HAS_GETHOSTENT /**/ - -/* HAS_GETHOSTNAME: - * This symbol, if defined, indicates that the C program may use the - * gethostname() routine to derive the host name. See also HAS_UNAME - * and PHOSTNAME. - */ -/* HAS_UNAME: - * This symbol, if defined, indicates that the C program may use the - * uname() routine to derive the host name. See also HAS_GETHOSTNAME - * and PHOSTNAME. - */ -/* PHOSTNAME: - * This symbol, if defined, indicates the command to feed to the - * popen() routine to derive the host name. See also HAS_GETHOSTNAME - * and HAS_UNAME. Note that the command uses a fully qualified path, - * so that it is safe even if used by a process with super-user - * privileges. - */ -/* HAS_PHOSTNAME: - * This symbol, if defined, indicates that the C program may use the - * contents of PHOSTNAME as a command to feed to the popen() routine - * to derive the host name. - */ -#$d_gethname HAS_GETHOSTNAME /**/ -#$d_uname HAS_UNAME /**/ -#$d_phostname HAS_PHOSTNAME /**/ -#ifdef HAS_PHOSTNAME -#define PHOSTNAME "$aphostname" /* How to get the host name */ -#endif - -/* HAS_GETHOST_PROTOS: - * This symbol, if defined, indicates that <netdb.h> includes - * prototypes for gethostent(), gethostbyname(), and - * gethostbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -#$d_gethostprotos HAS_GETHOST_PROTOS /**/ - -/* HAS_GETMNT: - * This symbol, if defined, indicates that the getmnt routine is - * available to get filesystem mount info by filename. - */ -#$d_getmnt HAS_GETMNT /**/ - -/* HAS_GETMNTENT: - * This symbol, if defined, indicates that the getmntent routine is - * available to iterate through mounted file systems to get their info. - */ -#$d_getmntent HAS_GETMNTENT /**/ - -/* HAS_GETNETBYADDR: - * This symbol, if defined, indicates that the getnetbyaddr() routine is - * available to look up networks by their IP addresses. - */ -#$d_getnbyaddr HAS_GETNETBYADDR /**/ - -/* HAS_GETNETBYNAME: - * This symbol, if defined, indicates that the getnetbyname() routine is - * available to look up networks by their names. - */ -#$d_getnbyname HAS_GETNETBYNAME /**/ - -/* HAS_GETNETENT: - * This symbol, if defined, indicates that the getnetent() routine is - * available to look up network names in some data base or another. - */ -#$d_getnent HAS_GETNETENT /**/ - -/* HAS_GETNET_PROTOS: - * This symbol, if defined, indicates that <netdb.h> includes - * prototypes for getnetent(), getnetbyname(), and - * getnetbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -#$d_getnetprotos HAS_GETNET_PROTOS /**/ - -/* HAS_GETPAGESIZE: - * This symbol, if defined, indicates that the getpagesize system call - * is available to get system page size, which is the granularity of - * many memory management calls. - */ -#$d_getpagsz HAS_GETPAGESIZE /**/ - -/* HAS_GETPROTOENT: - * This symbol, if defined, indicates that the getprotoent() routine is - * available to look up protocols in some data base or another. - */ -#$d_getpent HAS_GETPROTOENT /**/ - -/* HAS_GETPROTOBYNAME: - * This symbol, if defined, indicates that the getprotobyname() - * routine is available to look up protocols by their name. - */ -/* HAS_GETPROTOBYNUMBER: - * This symbol, if defined, indicates that the getprotobynumber() - * routine is available to look up protocols by their number. - */ -#$d_getpbyname HAS_GETPROTOBYNAME /**/ -#$d_getpbynumber HAS_GETPROTOBYNUMBER /**/ - -/* HAS_GETPROTO_PROTOS: - * This symbol, if defined, indicates that <netdb.h> includes - * prototypes for getprotoent(), getprotobyname(), and - * getprotobyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -#$d_getprotoprotos HAS_GETPROTO_PROTOS /**/ - -/* HAS_GETPRPWNAM: - * This symbol, if defined, indicates that the getprpwnam system call is - * available to retrieve protected (shadow) password entries by name. - */ -#$d_getprpwnam HAS_GETPRPWNAM /**/ - -/* HAS_GETPWENT: - * This symbol, if defined, indicates that the getpwent routine is - * available for sequential access of the passwd database. - * If this is not available, the older getpw() function may be available. - */ -#$d_getpwent HAS_GETPWENT /**/ - -/* HAS_GETSERVENT: - * This symbol, if defined, indicates that the getservent() routine is - * available to look up network services in some data base or another. - */ -#$d_getsent HAS_GETSERVENT /**/ - -/* HAS_GETSERV_PROTOS: - * This symbol, if defined, indicates that <netdb.h> includes - * prototypes for getservent(), getservbyname(), and - * getservbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -#$d_getservprotos HAS_GETSERV_PROTOS /**/ - -/* HAS_GETSPNAM: - * This symbol, if defined, indicates that the getspnam system call is - * available to retrieve SysV shadow password entries by name. - */ -#$d_getspnam HAS_GETSPNAM /**/ - -/* HAS_GETSERVBYNAME: - * This symbol, if defined, indicates that the getservbyname() - * routine is available to look up services by their name. - */ -/* HAS_GETSERVBYPORT: - * This symbol, if defined, indicates that the getservbyport() - * routine is available to look up services by their port. - */ -#$d_getsbyname HAS_GETSERVBYNAME /**/ -#$d_getsbyport HAS_GETSERVBYPORT /**/ - -/* HAS_GNULIBC: - * This symbol, if defined, indicates to the C program that - * the GNU C library is being used. - */ -#$d_gnulibc HAS_GNULIBC /**/ -#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE) -# define _GNU_SOURCE -#endif -/* HAS_HASMNTOPT: - * This symbol, if defined, indicates that the hasmntopt routine is - * available to query the mount options of file systems. - */ -#$d_hasmntopt HAS_HASMNTOPT /**/ - -/* HAS_HTONL: - * This symbol, if defined, indicates that the htonl() routine (and - * friends htons() ntohl() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_HTONS: - * This symbol, if defined, indicates that the htons() routine (and - * friends htonl() ntohl() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_NTOHL: - * This symbol, if defined, indicates that the ntohl() routine (and - * friends htonl() htons() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_NTOHS: - * This symbol, if defined, indicates that the ntohs() routine (and - * friends htonl() htons() ntohl()) are available to do network - * order byte swapping. - */ -#$d_htonl HAS_HTONL /**/ -#$d_htonl HAS_HTONS /**/ -#$d_htonl HAS_NTOHL /**/ -#$d_htonl HAS_NTOHS /**/ - -/* HAS_ICONV: - * This symbol, if defined, indicates that the iconv routine is - * available to do character set conversions. - */ -#$d_iconv HAS_ICONV /**/ - -/* HAS_INT64_T: - * This symbol will defined if the C compiler supports int64_t. - * Usually the <inttypes.h> needs to be included, but sometimes - * <sys/types.h> is enough. - */ -#$d_int64_t HAS_INT64_T /**/ - -/* HAS_ISASCII: - * This manifest constant lets the C program know that isascii - * is available. - */ -#$d_isascii HAS_ISASCII /**/ - -/* HAS_ISNAN: - * This symbol, if defined, indicates that the isnan routine is - * available to check whether a double is a NaN. - */ -#$d_isnan HAS_ISNAN /**/ - -/* HAS_ISNANL: - * This symbol, if defined, indicates that the isnanl routine is - * available to check whether a long double is a NaN. - */ -#$d_isnanl HAS_ISNANL /**/ - -/* HAS_LCHOWN: - * This symbol, if defined, indicates that the lchown routine is - * available to operate on a symbolic link (instead of following the - * link). - */ -#$d_lchown HAS_LCHOWN /**/ - -/* HAS_LDBL_DIG: - * This symbol, if defined, indicates that this system's <float.h> - * or <limits.h> defines the symbol LDBL_DIG, which is the number - * of significant digits in a long double precision number. Unlike - * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined. - */ -#$d_ldbl_dig HAS_LDBL_DIG /* */ - -/* HAS_LONG_DOUBLE: - * This symbol will be defined if the C compiler supports long - * doubles. - */ -/* LONG_DOUBLESIZE: - * This symbol contains the size of a long double, so that the - * C preprocessor can make decisions based on it. It is only - * defined if the system supports long doubles. - */ -#$d_longdbl HAS_LONG_DOUBLE /**/ -#ifdef HAS_LONG_DOUBLE -#define LONG_DOUBLESIZE $longdblsize /**/ -#endif - -/* HAS_LONG_LONG: - * This symbol will be defined if the C compiler supports long long. - */ -/* LONGLONGSIZE: - * This symbol contains the size of a long long, so that the - * C preprocessor can make decisions based on it. It is only - * defined if the system supports long long. - */ -#$d_longlong HAS_LONG_LONG /**/ -#ifdef HAS_LONG_LONG -#define LONGLONGSIZE $longlongsize /**/ -#endif - -/* HAS_LSEEK_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the lseek() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern off_t lseek(int, off_t, int); - */ -#$d_lseekproto HAS_LSEEK_PROTO /**/ - -/* HAS_MADVISE: - * This symbol, if defined, indicates that the madvise system call is - * available to map a file into memory. - */ -#$d_madvise HAS_MADVISE /**/ - -/* HAS_MEMCHR: - * This symbol, if defined, indicates that the memchr routine is available - * to locate characters within a C string. - */ -#$d_memchr HAS_MEMCHR /**/ - -/* HAS_MKDTEMP: - * This symbol, if defined, indicates that the mkdtemp routine is - * available to exclusively create a uniquely named temporary directory. - */ -#$d_mkdtemp HAS_MKDTEMP /**/ - -/* HAS_MKSTEMP: - * This symbol, if defined, indicates that the mkstemp routine is - * available to exclusively create and open a uniquely named - * temporary file. - */ -#$d_mkstemp HAS_MKSTEMP /**/ - -/* HAS_MKSTEMPS: - * This symbol, if defined, indicates that the mkstemps routine is - * available to excluslvely create and open a uniquely named - * (with a suffix) temporary file. - */ -#$d_mkstemps HAS_MKSTEMPS /**/ - -/* HAS_MMAP: - * This symbol, if defined, indicates that the mmap system call is - * available to map a file into memory. - */ -/* Mmap_t: - * This symbol holds the return type of the mmap() system call - * (and simultaneously the type of the first argument). - * Usually set to 'void *' or 'cadd_t'. - */ -#$d_mmap HAS_MMAP /**/ -#define Mmap_t $mmaptype /**/ - -/* HAS_MODFL: - * This symbol, if defined, indicates that the modfl routine is - * available to split a long double x into a fractional part f and - * an integer part i such that |f| < 1.0 and (f + i) = x. - */ -#$d_modfl HAS_MODFL /**/ - -/* HAS_MPROTECT: - * This symbol, if defined, indicates that the mprotect system call is - * available to modify the access protection of a memory mapped file. - */ -#$d_mprotect HAS_MPROTECT /**/ - -/* HAS_MSG: - * This symbol, if defined, indicates that the entire msg*(2) library is - * supported (IPC mechanism based on message queues). - */ -#$d_msg HAS_MSG /**/ - -/* HAS_OFF64_T: - * This symbol will be defined if the C compiler supports off64_t. - */ -#$d_off64_t HAS_OFF64_T /**/ - -/* HAS_OPEN3: - * This manifest constant lets the C program know that the three - * argument form of open(2) is available. - */ -#$d_open3 HAS_OPEN3 /**/ - -/* OLD_PTHREAD_CREATE_JOINABLE: - * This symbol, if defined, indicates how to create pthread - * in joinable (aka undetached) state. NOTE: not defined - * if pthread.h already has defined PTHREAD_CREATE_JOINABLE - * (the new version of the constant). - * If defined, known values are PTHREAD_CREATE_UNDETACHED - * and __UNDETACHED. - */ -#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/ - -/* HAS_PTHREAD_YIELD: - * This symbol, if defined, indicates that the pthread_yield - * routine is available to yield the execution of the current - * thread. sched_yield is preferable to pthread_yield. - */ -/* SCHED_YIELD: - * This symbol defines the way to yield the execution of - * the current thread. Known ways are sched_yield, - * pthread_yield, and pthread_yield with NULL. - */ -/* HAS_SCHED_YIELD: - * This symbol, if defined, indicates that the sched_yield - * routine is available to yield the execution of the current - * thread. sched_yield is preferable to pthread_yield. - */ -#$d_pthread_yield HAS_PTHREAD_YIELD /**/ -#define SCHED_YIELD $sched_yield /**/ -#$d_sched_yield HAS_SCHED_YIELD /**/ - -/* HAS_SAFE_BCOPY: - * This symbol, if defined, indicates that the bcopy routine is available - * to copy potentially overlapping memory blocks. Otherwise you should - * probably use memmove() or memcpy(). If neither is defined, roll your - * own version. - */ -#$d_safebcpy HAS_SAFE_BCOPY /**/ - -/* HAS_SAFE_MEMCPY: - * This symbol, if defined, indicates that the memcpy routine is available - * to copy potentially overlapping memory blocks. Otherwise you should - * probably use memmove() or memcpy(). If neither is defined, roll your - * own version. - */ -#$d_safemcpy HAS_SAFE_MEMCPY /**/ - -/* HAS_SANE_MEMCMP: - * This symbol, if defined, indicates that the memcmp routine is available - * and can be used to compare relative magnitudes of chars with their high - * bits set. If it is not defined, roll your own version. - */ -#$d_sanemcmp HAS_SANE_MEMCMP /**/ - -/* HAS_SEM: - * This symbol, if defined, indicates that the entire sem*(2) library is - * supported. - */ -#$d_sem HAS_SEM /**/ - -/* HAS_SETGRENT: - * This symbol, if defined, indicates that the setgrent routine is - * available for initializing sequential access of the group database. - */ -#$d_setgrent HAS_SETGRENT /**/ - -/* HAS_SETGROUPS: - * This symbol, if defined, indicates that the setgroups() routine is - * available to set the list of process groups. If unavailable, multiple - * groups are probably not supported. - */ -#$d_setgrps HAS_SETGROUPS /**/ - -/* HAS_SETHOSTENT: - * This symbol, if defined, indicates that the sethostent() routine is - * available. - */ -#$d_sethent HAS_SETHOSTENT /**/ - -/* HAS_SETNETENT: - * This symbol, if defined, indicates that the setnetent() routine is - * available. - */ -#$d_setnent HAS_SETNETENT /**/ - -/* HAS_SETPROTOENT: - * This symbol, if defined, indicates that the setprotoent() routine is - * available. - */ -#$d_setpent HAS_SETPROTOENT /**/ - -/* HAS_SETPROCTITLE: - * This symbol, if defined, indicates that the setproctitle routine is - * available to set process title. - */ -#$d_setproctitle HAS_SETPROCTITLE /**/ - -/* HAS_SETPWENT: - * This symbol, if defined, indicates that the setpwent routine is - * available for initializing sequential access of the passwd database. - */ -#$d_setpwent HAS_SETPWENT /**/ - -/* HAS_SETSERVENT: - * This symbol, if defined, indicates that the setservent() routine is - * available. - */ -#$d_setsent HAS_SETSERVENT /**/ - -/* HAS_SETVBUF: - * This symbol, if defined, indicates that the setvbuf routine is - * available to change buffering on an open stdio stream. - * to a line-buffered mode. - */ -#$d_setvbuf HAS_SETVBUF /**/ - -/* USE_SFIO: - * This symbol, if defined, indicates that sfio should - * be used. - */ -#$d_sfio USE_SFIO /**/ - -/* HAS_SHM: - * This symbol, if defined, indicates that the entire shm*(2) library is - * supported. - */ -#$d_shm HAS_SHM /**/ - -/* HAS_SIGACTION: - * This symbol, if defined, indicates that Vr4's sigaction() routine - * is available. - */ -#$d_sigaction HAS_SIGACTION /**/ - -/* HAS_SIGSETJMP: - * This variable indicates to the C program that the sigsetjmp() - * routine is available to save the calling process's registers - * and stack environment for later use by siglongjmp(), and - * to optionally save the process's signal mask. See - * Sigjmp_buf, Sigsetjmp, and Siglongjmp. - */ -/* Sigjmp_buf: - * This is the buffer type to be used with Sigsetjmp and Siglongjmp. - */ -/* Sigsetjmp: - * This macro is used in the same way as sigsetjmp(), but will invoke - * traditional setjmp() if sigsetjmp isn't available. - * See HAS_SIGSETJMP. - */ -/* Siglongjmp: - * This macro is used in the same way as siglongjmp(), but will invoke - * traditional longjmp() if siglongjmp isn't available. - * See HAS_SIGSETJMP. - */ -#$d_sigsetjmp HAS_SIGSETJMP /**/ -#ifdef HAS_SIGSETJMP -#define Sigjmp_buf sigjmp_buf -#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) -#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) -#else -#define Sigjmp_buf jmp_buf -#define Sigsetjmp(buf,save_mask) setjmp((buf)) -#define Siglongjmp(buf,retval) longjmp((buf),(retval)) -#endif - -/* HAS_SOCKET: - * This symbol, if defined, indicates that the BSD socket interface is - * supported. - */ -/* HAS_SOCKETPAIR: - * This symbol, if defined, indicates that the BSD socketpair() call is - * supported. - */ -/* HAS_MSG_CTRUNC: - * This symbol, if defined, indicates that the MSG_CTRUNC is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_MSG_DONTROUTE: - * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_MSG_OOB: - * This symbol, if defined, indicates that the MSG_OOB is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_MSG_PEEK: - * This symbol, if defined, indicates that the MSG_PEEK is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_MSG_PROXY: - * This symbol, if defined, indicates that the MSG_PROXY is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_SCM_RIGHTS: - * This symbol, if defined, indicates that the SCM_RIGHTS is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -#$d_socket HAS_SOCKET /**/ -#$d_sockpair HAS_SOCKETPAIR /**/ -#$d_msg_ctrunc HAS_MSG_CTRUNC /**/ -#$d_msg_dontroute HAS_MSG_DONTROUTE /**/ -#$d_msg_oob HAS_MSG_OOB /**/ -#$d_msg_peek HAS_MSG_PEEK /**/ -#$d_msg_proxy HAS_MSG_PROXY /**/ -#$d_scm_rights HAS_SCM_RIGHTS /**/ - -/* HAS_SOCKS5_INIT: - * This symbol, if defined, indicates that the socks5_init routine is - * available to initialize SOCKS 5. - */ -#$d_socks5_init HAS_SOCKS5_INIT /**/ - -/* HAS_SQRTL: - * This symbol, if defined, indicates that the sqrtl routine is - * available to do long double square roots. - */ -#$d_sqrtl HAS_SQRTL /**/ - -/* USE_STAT_BLOCKS: - * This symbol is defined if this system has a stat structure declaring - * st_blksize and st_blocks. - */ -#ifndef USE_STAT_BLOCKS -#$d_statblks USE_STAT_BLOCKS /**/ -#endif - -/* HAS_STRUCT_STATFS_F_FLAGS: - * This symbol, if defined, indicates that the struct statfs - * does have the f_flags member containing the mount flags of - * the filesystem containing the file. - * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3), - * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not - * have statfs() and struct statfs, they have ustat() and getmnt() - * with struct ustat and struct fs_data. - */ -#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS /**/ - -/* HAS_STRUCT_STATFS: - * This symbol, if defined, indicates that the struct statfs - * to do statfs() is supported. - */ -#$d_statfs_s HAS_STRUCT_STATFS /**/ - -/* HAS_FSTATVFS: - * This symbol, if defined, indicates that the fstatvfs routine is - * available to stat filesystems by file descriptors. - */ -#$d_fstatvfs HAS_FSTATVFS /**/ - -/* USE_STDIO_PTR: - * This symbol is defined if the _ptr and _cnt fields (or similar) - * of the stdio FILE structure can be used to access the stdio buffer - * for a file handle. If this is defined, then the FILE_ptr(fp) - * and FILE_cnt(fp) macros will also be defined and should be used - * to access these fields. - */ -/* FILE_ptr: - * This macro is used to access the _ptr field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_PTR is defined. - */ -/* STDIO_PTR_LVALUE: - * This symbol is defined if the FILE_ptr macro can be used as an - * lvalue. - */ -/* FILE_cnt: - * This macro is used to access the _cnt field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_PTR is defined. - */ -/* STDIO_CNT_LVALUE: - * This symbol is defined if the FILE_cnt macro can be used as an - * lvalue. - */ -/* STDIO_PTR_LVAL_SETS_CNT: - * This symbol is defined if using the FILE_ptr macro as an lvalue - * to increase the pointer by n has the side effect of decreasing the - * value of File_cnt(fp) by n. - */ -/* STDIO_PTR_LVAL_NOCHANGE_CNT: - * This symbol is defined if using the FILE_ptr macro as an lvalue - * to increase the pointer by n leaves File_cnt(fp) unchanged. - */ -#$d_stdstdio USE_STDIO_PTR /**/ -#ifdef USE_STDIO_PTR -#define FILE_ptr(fp) $stdio_ptr -#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/ -#define FILE_cnt(fp) $stdio_cnt -#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/ -#$d_stdio_ptr_lval_sets_cnt STDIO_PTR_LVAL_SETS_CNT /**/ -#$d_stdio_ptr_lval_nochange_cnt STDIO_PTR_LVAL_NOCHANGE_CNT /**/ -#endif - -/* USE_STDIO_BASE: - * This symbol is defined if the _base field (or similar) of the - * stdio FILE structure can be used to access the stdio buffer for - * a file handle. If this is defined, then the FILE_base(fp) macro - * will also be defined and should be used to access this field. - * Also, the FILE_bufsiz(fp) macro will be defined and should be used - * to determine the number of bytes in the buffer. USE_STDIO_BASE - * will never be defined unless USE_STDIO_PTR is. - */ -/* FILE_base: - * This macro is used to access the _base field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_BASE is defined. - */ -/* FILE_bufsiz: - * This macro is used to determine the number of bytes in the I/O - * buffer pointed to by _base field (or equivalent) of the FILE - * structure pointed to its argument. This macro will always be defined - * if USE_STDIO_BASE is defined. - */ -#$d_stdiobase USE_STDIO_BASE /**/ -#ifdef USE_STDIO_BASE -#define FILE_base(fp) $stdio_base -#define FILE_bufsiz(fp) $stdio_bufsiz -#endif - -/* HAS_STRERROR: - * This symbol, if defined, indicates that the strerror routine is - * available to translate error numbers to strings. See the writeup - * of Strerror() in this file before you try to define your own. - */ -/* HAS_SYS_ERRLIST: - * This symbol, if defined, indicates that the sys_errlist array is - * available to translate error numbers to strings. The extern int - * sys_nerr gives the size of that table. - */ -/* Strerror: - * This preprocessor symbol is defined as a macro if strerror() is - * not available to translate error numbers to strings but sys_errlist[] - * array is there. - */ -#$d_strerror HAS_STRERROR /**/ -#$d_syserrlst HAS_SYS_ERRLIST /**/ -#define Strerror(e) $d_strerrm - -/* HAS_STRTOLD: - * This symbol, if defined, indicates that the strtold routine is - * available to convert strings to long doubles. - */ -#$d_strtold HAS_STRTOLD /**/ - -/* HAS_STRTOLL: - * This symbol, if defined, indicates that the strtoll routine is - * available to convert strings to long longs. - */ -#$d_strtoll HAS_STRTOLL /**/ - -/* HAS_STRTOULL: - * This symbol, if defined, indicates that the strtoull routine is - * available to convert strings to unsigned long longs. - */ -#$d_strtoull HAS_STRTOULL /**/ - -/* HAS_STRTOUQ: - * This symbol, if defined, indicates that the strtouq routine is - * available to convert strings to unsigned long longs (quads). - */ -#$d_strtouq HAS_STRTOUQ /**/ - -/* HAS_TELLDIR_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the telldir() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern long telldir _((DIR*)); - */ -#$d_telldirproto HAS_TELLDIR_PROTO /**/ - -/* Time_t: - * This symbol holds the type returned by time(). It can be long, - * or time_t on BSD sites (in which case <sys/types.h> should be - * included). - */ -#define Time_t $timetype /* Time type */ - -/* HAS_TIMES: - * This symbol, if defined, indicates that the times() routine exists. - * Note that this became obsolete on some systems (SUNOS), which now - * use getrusage(). It may be necessary to include <sys/times.h>. - */ -#$d_times HAS_TIMES /**/ - -/* HAS_UNION_SEMUN: - * This symbol, if defined, indicates that the union semun is - * defined by including <sys/sem.h>. If not, the user code - * probably needs to define it as: - * union semun { - * int val; - * struct semid_ds *buf; - * unsigned short *array; - * } - */ -/* USE_SEMCTL_SEMUN: - * This symbol, if defined, indicates that union semun is - * used for semctl IPC_STAT. - */ -/* USE_SEMCTL_SEMID_DS: - * This symbol, if defined, indicates that struct semid_ds * is - * used for semctl IPC_STAT. - */ -#$d_union_semun HAS_UNION_SEMUN /**/ -#$d_semctl_semun USE_SEMCTL_SEMUN /**/ -#$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/ - -/* HAS_USTAT: - * This symbol, if defined, indicates that the ustat system call is - * available to query file system statistics by dev_t. - */ -#$d_ustat HAS_USTAT /**/ - -/* HAS_VFORK: - * This symbol, if defined, indicates that vfork() exists. - */ -#$d_vfork HAS_VFORK /**/ - -/* Signal_t: - * This symbol's value is either "void" or "int", corresponding to the - * appropriate return type of a signal handler. Thus, you can declare - * a signal handler using "Signal_t (*handler)()", and define the - * handler using "Signal_t handler(sig)". - */ -#define Signal_t $signal_t /* Signal handler's return type */ - -/* HAS_VPRINTF: - * This symbol, if defined, indicates that the vprintf routine is available - * to printf with a pointer to an argument list. If unavailable, you - * may need to write your own, probably in terms of _doprnt(). - */ -/* USE_CHAR_VSPRINTF: - * This symbol is defined if this system has vsprintf() returning type - * (char*). The trend seems to be to declare it as "int vsprintf()". It - * is up to the package author to declare vsprintf correctly based on the - * symbol. - */ -#$d_vprintf HAS_VPRINTF /**/ -#$d_charvspr USE_CHAR_VSPRINTF /**/ - -/* USE_DYNAMIC_LOADING: - * This symbol, if defined, indicates that dynamic loading of - * some sort is available. - */ -#$usedl USE_DYNAMIC_LOADING /**/ - -/* DOUBLESIZE: - * This symbol contains the size of a double, so that the C preprocessor - * can make decisions based on it. - */ -#define DOUBLESIZE $doublesize /**/ - -/* EBCDIC: - * This symbol, if defined, indicates that this system uses - * EBCDIC encoding. - */ -#$ebcdic EBCDIC /**/ - -/* FFLUSH_NULL: - * This symbol, if defined, tells that fflush(NULL) does flush - * all pending stdio output. - */ -/* FFLUSH_ALL: - * This symbol, if defined, tells that to flush - * all pending stdio output one must loop through all - * the stdio file handles stored in an array and fflush them. - * Note that if fflushNULL is defined, fflushall will not - * even be probed for and will be left undefined. - */ -#$fflushNULL FFLUSH_NULL /**/ -#$fflushall FFLUSH_ALL /**/ - -/* Fpos_t: - * This symbol holds the type used to declare file positions in libc. - * It can be fpos_t, long, uint, etc... It may be necessary to include - * <sys/types.h> to get any typedef'ed information. - */ -#define Fpos_t $fpostype /* File position type */ - -/* Gid_t_f: - * This symbol defines the format string used for printing a Gid_t. - */ -#define Gid_t_f $gidformat /**/ - -/* Gid_t_sign: - * This symbol holds the signedess of a Gid_t. - * 1 for unsigned, -1 for signed. - */ -#define Gid_t_sign $gidsign /* GID sign */ - -/* Gid_t_size: - * This symbol holds the size of a Gid_t in bytes. - */ -#define Gid_t_size $gidsize /* GID size */ - -/* Gid_t: - * This symbol holds the return type of getgid() and the type of - * argument to setrgid() and related functions. Typically, - * it is the type of group ids in the kernel. It can be int, ushort, - * gid_t, etc... It may be necessary to include <sys/types.h> to get - * any typedef'ed information. - */ -#define Gid_t $gidtype /* Type for getgid(), etc... */ - -/* Groups_t: - * This symbol holds the type used for the second argument to - * getgroups() and setgroups(). Usually, this is the same as - * gidtype (gid_t) , but sometimes it isn't. - * It can be int, ushort, gid_t, etc... - * It may be necessary to include <sys/types.h> to get any - * typedef'ed information. This is only required if you have - * getgroups() or setgroups().. - */ -#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) -#define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */ -#endif - -/* DB_Prefix_t: - * This symbol contains the type of the prefix structure element - * in the <db.h> header file. In older versions of DB, it was - * int, while in newer ones it is u_int32_t. - */ -/* DB_Hash_t: - * This symbol contains the type of the prefix structure element - * in the <db.h> header file. In older versions of DB, it was - * int, while in newer ones it is size_t. - */ -#define DB_Hash_t $db_hashtype /**/ -#define DB_Prefix_t $db_prefixtype /**/ - -/* I_GRP: - * This symbol, if defined, indicates to the C program that it should - * include <grp.h>. - */ -/* GRPASSWD: - * This symbol, if defined, indicates to the C program that struct group - * in <grp.h> contains gr_passwd. - */ -#$i_grp I_GRP /**/ -#$d_grpasswd GRPASSWD /**/ - -/* I_ICONV: - * This symbol, if defined, indicates that <iconv.h> exists and - * should be included. - */ -#$i_iconv I_ICONV /**/ - -/* I_IEEEFP: - * This symbol, if defined, indicates that <ieeefp.h> exists and - * should be included. - */ -#$i_ieeefp I_IEEEFP /**/ - -/* I_INTTYPES: - * This symbol, if defined, indicates to the C program that it should - * include <inttypes.h>. - */ -#$i_inttypes I_INTTYPES /**/ - -/* I_LIBUTIL: - * This symbol, if defined, indicates that <libutil.h> exists and - * should be included. - */ -#$i_libutil I_LIBUTIL /**/ - -/* I_MACH_CTHREADS: - * This symbol, if defined, indicates to the C program that it should - * include <mach/cthreads.h>. - */ -#$i_machcthr I_MACH_CTHREADS /**/ - -/* I_MNTENT: - * This symbol, if defined, indicates that <mntent.h> exists and - * should be included. - */ -#$i_mntent I_MNTENT /**/ - -/* I_NETDB: - * This symbol, if defined, indicates that <netdb.h> exists and - * should be included. - */ -#$i_netdb I_NETDB /**/ - -/* I_NETINET_TCP: - * This symbol, if defined, indicates to the C program that it should - * include <netinet/tcp.h>. - */ -#$i_netinettcp I_NETINET_TCP /**/ - -/* I_POLL: - * This symbol, if defined, indicates that <poll.h> exists and - * should be included. - */ -#$i_poll I_POLL /**/ - -/* I_PROT: - * This symbol, if defined, indicates that <prot.h> exists and - * should be included. - */ -#$i_prot I_PROT /**/ - -/* I_PTHREAD: - * This symbol, if defined, indicates to the C program that it should - * include <pthread.h>. - */ -#$i_pthread I_PTHREAD /**/ - -/* I_PWD: - * This symbol, if defined, indicates to the C program that it should - * include <pwd.h>. - */ -/* PWQUOTA: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_quota. - */ -/* PWAGE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_age. - */ -/* PWCHANGE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_change. - */ -/* PWCLASS: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_class. - */ -/* PWEXPIRE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_expire. - */ -/* PWCOMMENT: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_comment. - */ -/* PWGECOS: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_gecos. - */ -/* PWPASSWD: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_passwd. - */ -#$i_pwd I_PWD /**/ -#$d_pwquota PWQUOTA /**/ -#$d_pwage PWAGE /**/ -#$d_pwchange PWCHANGE /**/ -#$d_pwclass PWCLASS /**/ -#$d_pwexpire PWEXPIRE /**/ -#$d_pwcomment PWCOMMENT /**/ -#$d_pwgecos PWGECOS /**/ -#$d_pwpasswd PWPASSWD /**/ - -/* I_SHADOW: - * This symbol, if defined, indicates that <shadow.h> exists and - * should be included. - */ -#$i_shadow I_SHADOW /**/ - -/* I_SOCKS: - * This symbol, if defined, indicates that <socks.h> exists and - * should be included. - */ -#$i_socks I_SOCKS /**/ - -/* I_SUNMATH: - * This symbol, if defined, indicates that <sunmath.h> exists and - * should be included. - */ -#$i_sunmath I_SUNMATH /**/ - -/* I_SYSLOG: - * This symbol, if defined, indicates that <syslog.h> exists and - * should be included. - */ -#$i_syslog I_SYSLOG /**/ - -/* I_SYSMODE: - * This symbol, if defined, indicates that <sys/mode.h> exists and - * should be included. - */ -#$i_sysmode I_SYSMODE /**/ - -/* I_SYS_MOUNT: - * This symbol, if defined, indicates that <sys/mount.h> exists and - * should be included. - */ -#$i_sysmount I_SYS_MOUNT /**/ - -/* I_SYS_STATFS: - * This symbol, if defined, indicates that <sys/statfs.h> exists. - */ -#$i_sysstatfs I_SYS_STATFS /**/ - -/* I_SYS_STATVFS: - * This symbol, if defined, indicates that <sys/statvfs.h> exists and - * should be included. - */ -#$i_sysstatvfs I_SYS_STATVFS /**/ - -/* I_SYSUIO: - * This symbol, if defined, indicates that <sys/uio.h> exists and - * should be included. - */ -#$i_sysuio I_SYSUIO /**/ - -/* I_SYSUTSNAME: - * This symbol, if defined, indicates that <sys/utsname.h> exists and - * should be included. - */ -#$i_sysutsname I_SYSUTSNAME /**/ - -/* I_SYS_VFS: - * This symbol, if defined, indicates that <sys/vfs.h> exists and - * should be included. - */ -#$i_sysvfs I_SYS_VFS /**/ - -/* I_TIME: - * This symbol, if defined, indicates to the C program that it should - * include <time.h>. - */ -/* I_SYS_TIME: - * This symbol, if defined, indicates to the C program that it should - * include <sys/time.h>. - */ -/* I_SYS_TIME_KERNEL: - * This symbol, if defined, indicates to the C program that it should - * include <sys/time.h> with KERNEL defined. - */ -#$i_time I_TIME /**/ -#$i_systime I_SYS_TIME /**/ -#$i_systimek I_SYS_TIME_KERNEL /**/ - -/* I_USTAT: - * This symbol, if defined, indicates that <ustat.h> exists and - * should be included. - */ -#$i_ustat I_USTAT /**/ - -/* PERL_INC_VERSION_LIST: - * This variable specifies the list of subdirectories in over - * which perl.c:incpush() and lib/lib.pm will automatically - * search when adding directories to @INC, in a format suitable - * for a C initialization string. See the inc_version_list entry - * in Porting/Glossary for more details. - */ -#define PERL_INC_VERSION_LIST $inc_version_list_init /**/ - -/* INSTALL_USR_BIN_PERL: - * This symbol, if defined, indicates that Perl is to be installed - * also as /usr/bin/perl. - */ -#$installusrbinperl INSTALL_USR_BIN_PERL /**/ - -/* PERL_PRIfldbl: - * This symbol, if defined, contains the string used by stdio to - * format long doubles (format 'f') for output. - */ -/* PERL_PRIgldbl: - * This symbol, if defined, contains the string used by stdio to - * format long doubles (format 'g') for output. - */ -/* PERL_PRIeldbl: - * This symbol, if defined, contains the string used by stdio to - * format long doubles (format 'e') for output. - */ -/* PERL_SCNfldbl: - * This symbol, if defined, contains the string used by stdio to - * format long doubles (format 'f') for input. - */ -#$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/ -#$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/ -#$d_PRIeldbl PERL_PRIeldbl $sPRIeldbl /**/ -#$d_SCNfldbl PERL_SCNfldbl $sSCNfldbl /**/ - -/* Off_t: - * This symbol holds the type used to declare offsets in the kernel. - * It can be int, long, off_t, etc... It may be necessary to include - * <sys/types.h> to get any typedef'ed information. - */ -/* LSEEKSIZE: - * This symbol holds the number of bytes used by the Off_t. - */ -/* Off_t_size: - * This symbol holds the number of bytes used by the Off_t. - */ -#define Off_t $lseektype /* <offset> type */ -#define LSEEKSIZE $lseeksize /* <offset> size */ -#define Off_t_size $lseeksize /* <offset> size */ - -/* Free_t: - * This variable contains the return type of free(). It is usually - * void, but occasionally int. - */ -/* Malloc_t: - * This symbol is the type of pointer returned by malloc and realloc. - */ -#define Malloc_t $malloctype /**/ -#define Free_t $freetype /**/ - -/* MYMALLOC: - * This symbol, if defined, indicates that we're using our own malloc. - */ -#$d_mymalloc MYMALLOC /**/ - -/* Mode_t: - * This symbol holds the type used to declare file modes - * for systems calls. It is usually mode_t, but may be - * int or unsigned short. It may be necessary to include <sys/types.h> - * to get any typedef'ed information. - */ -#define Mode_t $modetype /* file mode parameter for system calls */ - -/* VAL_O_NONBLOCK: - * This symbol is to be used during open() or fcntl(F_SETFL) to turn on - * non-blocking I/O for the file descriptor. Note that there is no way - * back, i.e. you cannot turn it blocking again this way. If you wish to - * alternatively switch between blocking and non-blocking, use the - * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. - */ -/* VAL_EAGAIN: - * This symbol holds the errno error code set by read() when no data was - * present on the non-blocking file descriptor. - */ -/* RD_NODATA: - * This symbol holds the return code from read() when no data is present - * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is - * not defined, then you can't distinguish between no data and EOF by - * issuing a read(). You'll have to find another way to tell for sure! - */ -/* EOF_NONBLOCK: - * This symbol, if defined, indicates to the C program that a read() on - * a non-blocking file descriptor will return 0 on EOF, and not the value - * held in RD_NODATA (-1 usually, in that case!). - */ -#define VAL_O_NONBLOCK $o_nonblock -#define VAL_EAGAIN $eagain -#define RD_NODATA $rd_nodata -#$d_eofnblk EOF_NONBLOCK - -/* Netdb_host_t: - * This symbol holds the type used for the 1st argument - * to gethostbyaddr(). - */ -/* Netdb_hlen_t: - * This symbol holds the type used for the 2nd argument - * to gethostbyaddr(). - */ -/* Netdb_name_t: - * This symbol holds the type used for the argument to - * gethostbyname(). - */ -/* Netdb_net_t: - * This symbol holds the type used for the 1st argument to - * getnetbyaddr(). - */ -#define Netdb_host_t $netdb_host_type /**/ -#define Netdb_hlen_t $netdb_hlen_type /**/ -#define Netdb_name_t $netdb_name_type /**/ -#define Netdb_net_t $netdb_net_type /**/ - -/* PERL_OTHERLIBDIRS: - * This variable contains a colon-separated set of paths for the perl - * binary to search for additional library files or modules. - * These directories will be tacked to the end of @INC. - * Perl will automatically search below each path for version- - * and architecture-specific directories. See PERL_INC_VERSION_LIST - * for more details. - */ -#$d_perl_otherlibdirs PERL_OTHERLIBDIRS "$otherlibdirs" /**/ - -/* IVTYPE: - * This symbol defines the C type used for Perl's IV. - */ -/* UVTYPE: - * This symbol defines the C type used for Perl's UV. - */ -/* I8TYPE: - * This symbol defines the C type used for Perl's I8. - */ -/* U8TYPE: - * This symbol defines the C type used for Perl's U8. - */ -/* I16TYPE: - * This symbol defines the C type used for Perl's I16. - */ -/* U16TYPE: - * This symbol defines the C type used for Perl's U16. - */ -/* I32TYPE: - * This symbol defines the C type used for Perl's I32. - */ -/* U32TYPE: - * This symbol defines the C type used for Perl's U32. - */ -/* I64TYPE: - * This symbol defines the C type used for Perl's I64. - */ -/* U64TYPE: - * This symbol defines the C type used for Perl's U64. - */ -/* NVTYPE: - * This symbol defines the C type used for Perl's NV. - */ -/* IVSIZE: - * This symbol contains the sizeof(IV). - */ -/* UVSIZE: - * This symbol contains the sizeof(UV). - */ -/* I8SIZE: - * This symbol contains the sizeof(I8). - */ -/* U8SIZE: - * This symbol contains the sizeof(U8). - */ -/* I16SIZE: - * This symbol contains the sizeof(I16). - */ -/* U16SIZE: - * This symbol contains the sizeof(U16). - */ -/* I32SIZE: - * This symbol contains the sizeof(I32). - */ -/* U32SIZE: - * This symbol contains the sizeof(U32). - */ -/* I64SIZE: - * This symbol contains the sizeof(I64). - */ -/* U64SIZE: - * This symbol contains the sizeof(U64). - */ -/* NVSIZE: - * This symbol contains the sizeof(NV). - */ -/* NV_PRESERVES_UV: - * This symbol, if defined, indicates that a variable of type NVTYPE - * can preserve all the bits of a variable of type UVTYPE. - */ -/* NV_PRESERVES_UV_BITS: - * This symbol contains the number of bits a variable of type NVTYPE - * can preserve of a variable of type UVTYPE. - */ -#define IVTYPE $ivtype /**/ -#define UVTYPE $uvtype /**/ -#define I8TYPE $i8type /**/ -#define U8TYPE $u8type /**/ -#define I16TYPE $i16type /**/ -#define U16TYPE $u16type /**/ -#define I32TYPE $i32type /**/ -#define U32TYPE $u32type /**/ -#ifdef HAS_QUAD -#define I64TYPE $i64type /**/ -#define U64TYPE $u64type /**/ -#endif -#define NVTYPE $nvtype /**/ -#define IVSIZE $ivsize /**/ -#define UVSIZE $uvsize /**/ -#define I8SIZE $i8size /**/ -#define U8SIZE $u8size /**/ -#define I16SIZE $i16size /**/ -#define U16SIZE $u16size /**/ -#define I32SIZE $i32size /**/ -#define U32SIZE $u32size /**/ -#ifdef HAS_QUAD -#define I64SIZE $i64size /**/ -#define U64SIZE $u64size /**/ -#endif -#define NVSIZE $nvsize /**/ -#$d_nv_preserves_uv NV_PRESERVES_UV -#define NV_PRESERVES_UV_BITS $d_nv_preserves_uv_bits - -/* IVdf: - * This symbol defines the format string used for printing a Perl IV - * as a signed decimal integer. - */ -/* UVuf: - * This symbol defines the format string used for printing a Perl UV - * as an unsigned decimal integer. - */ -/* UVof: - * This symbol defines the format string used for printing a Perl UV - * as an unsigned octal integer. - */ -/* UVxf: - * This symbol defines the format string used for printing a Perl UV - * as an unsigned hexadecimal integer in lowercase abcdef. - */ -/* NVef: - * This symbol defines the format string used for printing a Perl NV - * using %e-ish floating point format. - */ -/* NVff: - * This symbol defines the format string used for printing a Perl NV - * using %f-ish floating point format. - */ -/* NVgf: - * This symbol defines the format string used for printing a Perl NV - * using %g-ish floating point format. - */ -#define IVdf $ivdformat /**/ -#define UVuf $uvuformat /**/ -#define UVof $uvoformat /**/ -#define UVxf $uvxformat /**/ -#define NVef $nveformat /**/ -#define NVff $nvfformat /**/ -#define NVgf $nvgformat /**/ - -/* Pid_t: - * This symbol holds the type used to declare process ids in the kernel. - * It can be int, uint, pid_t, etc... It may be necessary to include - * <sys/types.h> to get any typedef'ed information. - */ -#define Pid_t $pidtype /* PID type */ - -/* PRIVLIB: - * This symbol contains the name of the private library for this package. - * The library is private in the sense that it needn't be in anyone's - * execution path, but it should be accessible by the world. The program - * should be prepared to do ~ expansion. - */ -/* PRIVLIB_EXP: - * This symbol contains the ~name expanded version of PRIVLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -#define PRIVLIB "$privlib" /**/ -#define PRIVLIB_EXP "$privlibexp" /**/ - -/* PTRSIZE: - * This symbol contains the size of a pointer, so that the C preprocessor - * can make decisions based on it. It will be sizeof(void *) if - * the compiler supports (void *); otherwise it will be - * sizeof(char *). - */ -#define PTRSIZE $ptrsize /**/ - -/* Drand01: - * This macro is to be used to generate uniformly distributed - * random numbers over the range [0., 1.[. You may have to supply - * an 'extern double drand48();' in your program since SunOS 4.1.3 - * doesn't provide you with anything relevant in it's headers. - * See HAS_DRAND48_PROTO. - */ -/* Rand_seed_t: - * This symbol defines the type of the argument of the - * random seed function. - */ -/* seedDrand01: - * This symbol defines the macro to be used in seeding the - * random number generator (see Drand01). - */ -/* RANDBITS: - * This symbol indicates how many bits are produced by the - * function used to generate normalized random numbers. - * Values include 15, 16, 31, and 48. - */ -#define Drand01() $drand01 /**/ -#define Rand_seed_t $randseedtype /**/ -#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/ -#define RANDBITS $randbits /**/ - -/* SELECT_MIN_BITS: - * This symbol holds the minimum number of bits operated by select. - * That is, if you do select(n, ...), how many bits at least will be - * cleared in the masks if some activity is detected. Usually this - * is either n or 32*ceil(n/32), especially many little-endians do - * the latter. This is only useful if you have select(), naturally. - */ -#define SELECT_MIN_BITS $selectminbits /**/ - -/* Select_fd_set_t: - * This symbol holds the type used for the 2nd, 3rd, and 4th - * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET - * is defined, and 'int *' otherwise. This is only useful if you - * have select(), of course. - */ -#define Select_fd_set_t $selecttype /**/ - -/* SIG_NAME: - * This symbol contains a list of signal names in order of - * signal number. This is intended - * to be used as a static array initialization, like this: - * char *sig_name[] = { SIG_NAME }; - * The signals in the list are separated with commas, and each signal - * is surrounded by double quotes. There is no leading SIG in the signal - * name, i.e. SIGQUIT is known as "QUIT". - * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, - * etc., where nn is the actual signal number (e.g. NUM37). - * The signal number for sig_name[i] is stored in sig_num[i]. - * The last element is 0 to terminate the list with a NULL. This - * corresponds to the 0 at the end of the sig_num list. - */ -/* SIG_NUM: - * This symbol contains a list of signal numbers, in the same order as the - * SIG_NAME list. It is suitable for static array initialization, as in: - * int sig_num[] = { SIG_NUM }; - * The signals in the list are separated with commas, and the indices - * within that list and the SIG_NAME list match, so it's easy to compute - * the signal name from a number or vice versa at the price of a small - * dynamic linear lookup. - * Duplicates are allowed, but are moved to the end of the list. - * The signal number corresponding to sig_name[i] is sig_number[i]. - * if (i < NSIG) then sig_number[i] == i. - * The last element is 0, corresponding to the 0 at the end of - * the sig_name list. - */ -#define SIG_NAME $sig_name_init /**/ -#define SIG_NUM $sig_num_init /**/ - -/* SITEARCH: - * This symbol contains the name of the private library for this package. - * The library is private in the sense that it needn't be in anyone's - * execution path, but it should be accessible by the world. The program - * should be prepared to do ~ expansion. - * The standard distribution will put nothing in this directory. - * After perl has been installed, users may install their own local - * architecture-dependent modules in this directory with - * MakeMaker Makefile.PL - * or equivalent. See INSTALL for details. - */ -/* SITEARCH_EXP: - * This symbol contains the ~name expanded version of SITEARCH, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -#define SITEARCH "$sitearch" /**/ -#define SITEARCH_EXP "$sitearchexp" /**/ - -/* SITELIB: - * This symbol contains the name of the private library for this package. - * The library is private in the sense that it needn't be in anyone's - * execution path, but it should be accessible by the world. The program - * should be prepared to do ~ expansion. - * The standard distribution will put nothing in this directory. - * After perl has been installed, users may install their own local - * architecture-independent modules in this directory with - * MakeMaker Makefile.PL - * or equivalent. See INSTALL for details. - */ -/* SITELIB_EXP: - * This symbol contains the ~name expanded version of SITELIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -/* SITELIB_STEM: - * This define is SITELIB_EXP with any trailing version-specific component - * removed. The elements in inc_version_list (inc_version_list.U) can - * be tacked onto this variable to generate a list of directories to search. - */ -#define SITELIB "$sitelib" /**/ -#define SITELIB_EXP "$sitelibexp" /**/ -#define SITELIB_STEM "$sitelib_stem" /**/ - -/* Size_t_size: - * This symbol holds the size of a Size_t in bytes. - */ -#define Size_t_size $sizesize /* */ - -/* Size_t: - * This symbol holds the type used to declare length parameters - * for string functions. It is usually size_t, but may be - * unsigned long, int, etc. It may be necessary to include - * <sys/types.h> to get any typedef'ed information. - */ -#define Size_t $sizetype /* length paramater for string functions */ - -/* Sock_size_t: - * This symbol holds the type used for the size argument of - * various socket calls (just the base type, not the pointer-to). - */ -#define Sock_size_t $socksizetype /**/ - -/* SSize_t: - * This symbol holds the type used by functions that return - * a count of bytes or an error condition. It must be a signed type. - * It is usually ssize_t, but may be long or int, etc. - * It may be necessary to include <sys/types.h> or <unistd.h> - * to get any typedef'ed information. - * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). - */ -#define SSize_t $ssizetype /* signed count of bytes */ - -/* STARTPERL: - * This variable contains the string to put in front of a perl - * script to make sure (one hopes) that it runs with perl and not - * some shell. - */ -#define STARTPERL "$startperl" /**/ - -/* HAS_STDIO_STREAM_ARRAY: - * This symbol, if defined, tells that there is an array - * holding the stdio streams. - */ -/* STDIO_STREAM_ARRAY: - * This symbol tells the name of the array holding the stdio streams. - * Usual values include _iob, __iob, and __sF. - */ -#$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY /**/ -#define STDIO_STREAM_ARRAY $stdio_stream_array - -/* Uid_t_f: - * This symbol defines the format string used for printing a Uid_t. - */ -#define Uid_t_f $uidformat /**/ - -/* Uid_t_sign: - * This symbol holds the signedess of a Uid_t. - * 1 for unsigned, -1 for signed. - */ -#define Uid_t_sign $uidsign /* UID sign */ - -/* Uid_t_size: - * This symbol holds the size of a Uid_t in bytes. - */ -#define Uid_t_size $uidsize /* UID size */ - -/* Uid_t: - * This symbol holds the type used to declare user ids in the kernel. - * It can be int, ushort, uid_t, etc... It may be necessary to include - * <sys/types.h> to get any typedef'ed information. - */ -#define Uid_t $uidtype /* UID type */ - -/* USE_64_BIT_INT: - * This symbol, if defined, indicates that 64-bit integers should - * be used when available. If not defined, the native integers - * will be employed (be they 32 or 64 bits). The minimal possible - * 64-bitness is used, just enough to get 64-bit integers into Perl. - * This may mean using for example "long longs", while your memory - * may still be limited to 2 gigabytes. - */ -/* USE_64_BIT_ALL: - * This symbol, if defined, indicates that 64-bit integers should - * be used when available. If not defined, the native integers - * will be used (be they 32 or 64 bits). The maximal possible - * 64-bitness is employed: LP64 or ILP64, meaning that you will - * be able to use more than 2 gigabytes of memory. This mode is - * even more binary incompatible than USE_64_BIT_INT. You may not - * be able to run the resulting executable in a 32-bit CPU at all or - * you may need at least to reboot your OS to 64-bit mode. - */ -#ifndef USE_64_BIT_INT -#$use64bitint USE_64_BIT_INT /**/ -#endif - -#ifndef USE_64_BIT_ALL -#$use64bitall USE_64_BIT_ALL /**/ -#endif - -/* USE_LARGE_FILES: - * This symbol, if defined, indicates that large file support - * should be used when available. - */ -#ifndef USE_LARGE_FILES -#$uselargefiles USE_LARGE_FILES /**/ -#endif - -/* USE_LONG_DOUBLE: - * This symbol, if defined, indicates that long doubles should - * be used when available. - */ -#ifndef USE_LONG_DOUBLE -#$uselongdouble USE_LONG_DOUBLE /**/ -#endif - -/* USE_MORE_BITS: - * This symbol, if defined, indicates that 64-bit interfaces and - * long doubles should be used when available. - */ -#ifndef USE_MORE_BITS -#$usemorebits USE_MORE_BITS /**/ -#endif - -/* MULTIPLICITY: - * This symbol, if defined, indicates that Perl should - * be built to use multiplicity. - */ -#ifndef MULTIPLICITY -#$usemultiplicity MULTIPLICITY /**/ -#endif - -/* USE_PERLIO: - * This symbol, if defined, indicates that the PerlIO abstraction should - * be used throughout. If not defined, stdio should be - * used in a fully backward compatible manner. - */ -#ifndef USE_PERLIO -#$useperlio USE_PERLIO /**/ -#endif - -/* USE_SOCKS: - * This symbol, if defined, indicates that Perl should - * be built to use socks. - */ -#ifndef USE_SOCKS -#$usesocks USE_SOCKS /**/ -#endif - -/* USE_ITHREADS: - * This symbol, if defined, indicates that Perl should be built to - * use the interpreter-based threading implementation. - */ -/* USE_5005THREADS: - * This symbol, if defined, indicates that Perl should be built to - * use the 5.005-based threading implementation. - */ -/* OLD_PTHREADS_API: - * This symbol, if defined, indicates that Perl should - * be built to use the old draft POSIX threads API. - */ -#$use5005threads USE_5005THREADS /**/ -#$useithreads USE_ITHREADS /**/ -#if defined(USE_5005THREADS) && !defined(USE_ITHREADS) -#define USE_THREADS /* until src is revised*/ -#endif -#$d_oldpthreads OLD_PTHREADS_API /**/ - -/* PERL_VENDORARCH: - * If defined, this symbol contains the name of a private library. - * The library is private in the sense that it needn't be in anyone's - * execution path, but it should be accessible by the world. - * It may have a ~ on the front. - * The standard distribution will put nothing in this directory. - * Vendors who distribute perl may wish to place their own - * architecture-dependent modules and extensions in this directory with - * MakeMaker Makefile.PL INSTALLDIRS=vendor - * or equivalent. See INSTALL for details. - */ -/* PERL_VENDORARCH_EXP: - * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -#$d_vendorarch PERL_VENDORARCH "$vendorarch" /**/ -#$d_vendorarch PERL_VENDORARCH_EXP "$vendorarchexp" /**/ - -/* PERL_VENDORLIB_EXP: - * This symbol contains the ~name expanded version of VENDORLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -/* PERL_VENDORLIB_STEM: - * This define is PERL_VENDORLIB_EXP with any trailing version-specific component - * removed. The elements in inc_version_list (inc_version_list.U) can - * be tacked onto this variable to generate a list of directories to search. - */ -#$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp" /**/ -#$d_vendorlib PERL_VENDORLIB_STEM "$vendorlib_stem" /**/ - -/* VOIDFLAGS: - * This symbol indicates how much support of the void type is given by this - * compiler. What various bits mean: - * - * 1 = supports declaration of void - * 2 = supports arrays of pointers to functions returning void - * 4 = supports comparisons between pointers to void functions and - * addresses of void functions - * 8 = suports declaration of generic void pointers - * - * The package designer should define VOIDUSED to indicate the requirements - * of the package. This can be done either by #defining VOIDUSED before - * including config.h, or by defining defvoidused in Myinit.U. If the - * latter approach is taken, only those flags will be tested. If the - * level of void support necessary is not present, defines void to int. - */ -#ifndef VOIDUSED -#define VOIDUSED $defvoidused -#endif -#define VOIDFLAGS $voidflags -#if (VOIDFLAGS & VOIDUSED) != VOIDUSED -#define void int /* is void to be avoided? */ -#define M_VOID /* Xenix strikes again */ -#endif - -/* PERL_XS_APIVERSION: - * This variable contains the version of the oldest perl binary - * compatible with the present perl. perl.c:incpush() and - * lib/lib.pm will automatically search in $sitearch for older - * directories across major versions back to xs_apiversion. - * This is only useful if you have a perl library directory tree - * structured like the default one. - * See INSTALL for how this works. - * The versioned site_perl directory was introduced in 5.005, - * so that is the lowest possible value. - * Since this can depend on compile time options (such as - * bincompat) it is set by Configure. Other non-default sources - * of potential incompatibility, such as multiplicity, threads, - * debugging, 64bits, sfio, etc., are not checked for currently, - * though in principle we could go snooping around in old - * Config.pm files. - */ -/* PERL_PM_APIVERSION: - * This variable contains the version of the oldest perl - * compatible with the present perl. (That is, pure perl modules - * written for pm_apiversion will still work for the current - * version). perl.c:incpush() and lib/lib.pm will automatically - * search in $sitelib for older directories across major versions - * back to pm_apiversion. This is only useful if you have a perl - * library directory tree structured like the default one. The - * versioned site_perl library was introduced in 5.005, so that's - * the default setting for this variable. It's hard to imagine - * it changing before Perl6. It is included here for symmetry - * with xs_apiveprsion -- the searching algorithms will - * (presumably) be similar. - * See the INSTALL file for how this works. - */ -#define PERL_XS_APIVERSION "$xs_apiversion" -#define PERL_PM_APIVERSION "$pm_apiversion" - -/* HAS_GETPGRP: - * This symbol, if defined, indicates that the getpgrp routine is - * available to get the current process group. - */ -/* USE_BSD_GETPGRP: - * This symbol, if defined, indicates that getpgrp needs one - * arguments whereas USG one needs none. - */ -#$d_getpgrp HAS_GETPGRP /**/ -#$d_bsdgetpgrp USE_BSD_GETPGRP /**/ - -/* HAS_SETPGRP: - * This symbol, if defined, indicates that the setpgrp routine is - * available to set the current process group. - */ -/* USE_BSD_SETPGRP: - * This symbol, if defined, indicates that setpgrp needs two - * arguments whereas USG one needs none. See also HAS_SETPGID - * for a POSIX interface. - */ -#$d_setpgrp HAS_SETPGRP /**/ -#$d_bsdsetpgrp USE_BSD_SETPGRP /**/ - -/* STDCHAR: - * This symbol is defined to be the type of char used in stdio.h. - * It has the values "unsigned char" or "char". - */ -#define STDCHAR $stdchar /**/ - -/* HAS__FWALK: - * This symbol, if defined, indicates that the _fwalk system call is - * available to apply a function to all the file handles. - */ -#$d__fwalk HAS__FWALK /**/ - -/* FCNTL_CAN_LOCK: - * This symbol, if defined, indicates that fcntl() can be used - * for file locking. Normally on Unix systems this is defined. - * It may be undefined on VMS. - */ -#$d_fcntl_can_lock FCNTL_CAN_LOCK /**/ - -/* HAS_FSYNC: - * This symbol, if defined, indicates that the fsync routine is - * available to write a file's modified data and attributes to - * permanent storage. - */ -#$d_fsync HAS_FSYNC /**/ - -/* HAS_SBRK_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the sbrk() function. Otherwise, it is up - * to the program to supply one. Good guesses are - * extern void* sbrk _((int)); - * extern void* sbrk _((size_t)); - */ -#$d_sbrkproto HAS_SBRK_PROTO /**/ - -#endif -!GROK!THIS! |
