diff options
Diffstat (limited to 'contrib/perl5/Changes5.002')
| -rw-r--r-- | contrib/perl5/Changes5.002 | 4003 |
1 files changed, 0 insertions, 4003 deletions
diff --git a/contrib/perl5/Changes5.002 b/contrib/perl5/Changes5.002 deleted file mode 100644 index 6382d52..0000000 --- a/contrib/perl5/Changes5.002 +++ /dev/null @@ -1,4003 +0,0 @@ -------------- -Version 5.002 -------------- - -The main enhancement to the Perl core was the addition of prototypes. -Many of the modules that come with Perl have been extensively upgraded. - -Other than that, nearly all the changes for 5.002 were bug fixes of one -variety or another, so here's the bug list, along with the "resolution" -for each of them. If you wish to correspond about any of them, please -include the bug number (if any). - -Changes specific to the Configure and build process are described -at the bottom. - -Added APPLLIB_EXP for embedded perl library support. -Files patched: perl.c - -Couldn't define autoloaded routine by assignment to typeglob. -Files patched: pp_hot.c sv.c - -NETaa13525: Tiny patch to fix installman -n -From: Larry Wall -Files patched: installman - -NETaa13525: de-documented \v -Files patched: pod/perlop.pod pod/perlre.pod - -NETaa13525: doc changes -Files patched: pod/perlop.pod pod/perltrap.pod - -NETaa13525: perlxs update from Dean Roehrich -Files patched: pod/perlxs.pod - -NETaa13525: rename powerunix to powerux -Files patched: MANIFEST hints/powerux.sh - -NETaa13540: VMS uses CLK_TCK for HZ -Files patched: pp_sys.c - -NETaa13721: pad_findlex core dumps on bad CvOUTSIDE() -From: Carl Witty -Files patched: op.c sv.c toke.c - Each CV has a reference to the CV containing it lexically. Unfortunately, - it didn't reference-count this reference, so when the outer CV was freed, - we ended up with a pointer to memory that got reused later as some other kind - of SV. - -NETaa13721: warning suppression -Files patched: toke.c - (same) - -NETaa13722: walk.c had inconsistent static declarations -From: Tim Bunce -Files patched: x2p/walk.c - Consolidated the various declarations and made them consistent with - the actual definitions. - -NETaa13724: -MPackage=args patch -From: Tim Bunce -Files patched: perl.c pod/perlrun.pod - Added in the -MPackage=args patch too. - -NETaa13729: order-of-evaluation dependency in scope.c on leaving REGCONTEXT -From: "Jason Shirk" -Files patched: scope.c - Did - - I32 delta = SSPOPINT; - savestack_ix -= delta; /* regexp must have croaked */ - - instead. - -NETaa13731: couldn't assign external lexical array to itself -From: oneill@cs.sfu.ca -Files patched: op.c - The pad_findmy routine was only checking previous statements for previous - mention of external lexicals, so the fact that the current statement - already mentioned @list was not noted. It therefore allocated another - reference to the outside lexical, and this didn't compare equal when - the assigment parsing code was trying to determine whether there was a - common variable on either side of the equals. Since it didn't see the - same variable, it thought it could avoid making copies of the values on - the stack during list assignment. Unfortunately, before using those - values, the list assignment has to zero out the target array, which - destroys the values. - - The fix was to make pad_findmy search the current statement as well. This - was actually a holdover from some old code that was trying to delay - introduction of "my" variables until the next statement. This is now - done with a different mechanism, so the fix should not adversely affect - that. - -NETaa13733: s/// doesn't free old string when using copy mode -From: Larry Wall -Files patched: pp_ctl.c pp_hot.c - When I removed the use of sv_replace(), I simply forgot to free the old char*. - -NETaa13736: closures leaked memory -From: Carl Witty -Files patched: op.c pp.c - This is a specific example of a more general bug, fixed as NETaa13760, having - to do with reference counts on comppads. - -NETaa13739: XSUB interface caches gimme in case XSUB clobbers it -From: Dean Roehrich -Files patched: pp_hot.c - Applied suggest patch. Also deleted second gimme declaration as redundant. - -NETaa13760: comppad reference counts were inconsistent -From: Larry Wall -Files patched: op.c perl.c pp_ctl.c toke.c - All official references to comppads are supposed to be through compcv now, - but the transformation was not complete, resulting in memory leakage. - -NETaa13761: sv_2pv() wrongly preferred IV to NV when SV was readonly -From: "Jack R. Lawler" -Files patched: sv.c - Okay, I understand how this one happened. This is a case where a - beneficial fix uncovered a bug elsewhere. I changed the constant - folder to prefer integer results over double if the numbers are the - same. In this case, they aren't, but it leaves the integer value there - anyway because the storage is already allocated for it, and it *might* - be used in an integer context. And since it's producing a constant, it - sets READONLY. Unfortunately, sv_2pv() bogusly preferred the integer - value to the double when READONLY was set. This never showed up if you - just said - - print 1.4142135623731; - - because in that case, there was already a string value. - - -NETaa13772: shmwrite core dumps consistently -From: Gabe Schaffer -Files patched: opcode.h opcode.pl - The shmwrite operator is a list operator but neglected to push a stack - mark beforehand, because an 'm' was missing from opcode.pl. - -NETaa13773: $. was misdocumented as read-only. -From: Inaba Hiroto -Files patched: pod/perlvar.pod - <1.array-element-read-only> - % perl -le '$,=", "; $#w=5; for (@w) { $_=1; } print @w' - Modification of a read-only value attempted at -e line 1. - % perl4 -le '$,=", "; $#w=5; for (@w) { $_=1; } print @w' - 1, 1, 1, 1, 1, 1 - - This one may stay the way it is for performance reasons. - - <2.begin-local-RS> - % cat abc - a - b - c - % perl -e 'BEGIN { local $/ = ""; } print "$.:$_" while <>;' abc - 1:a - b - c - % perl -e '{ local $/ = ""; } print "$.:$_" while <>;' abc - 1:a - 2:b - 3:c - - $/ wasn't initialized early enough, so local set it back to permanently - undefined on exit from the block. - - <3.grep-x0-bug> - % perl -le 'print grep(/^-/ ? ($x=$_) x 0 : 1, "a", "-b", "c");' - a - - % perl4 -le 'print grep(/^-/ ? ($x=$_) x 0 : 1, "a", "-b", "c");' - ac - - An extra mark was left on the stack if (('x') x $repeat) was used in a scalar - context. - - <4.input-lineno-assign> - # perl -w does not complain about assignment to $. (Is this just a feature?) - # perlvar.pod says "This variable should be considered read-only." - % cat abc - a - b - c - % perl -wnle '$. = 10 if $. == 2; print "$.:$_"' abc - 1:a - 10:b - 11:c - - Fixed doc. - - <5.local-soft-ref.bug> - % perl -e 'local ${"a"}=1;' - zsh: 529 segmentation fault perl -e 'local ${"a"}=1;' - - Now says - Can't localize a reference at -e line 1. - - <6.package-readline> - % perl -e 'package foo; sub foo { 1; } package main; $_ = foo::foo(); print' - 1 - % perl -e ' - package readline; sub foo { 1; } package main; $_ = readline::foo(); print' - Undefined subroutine &main::foo called at -e line 1. - % perl -e ' - package readline; sub foo { 1; } package main; $_ = &readline::foo(); print' - 1 - - Now treats foo::bar correctly even if foo is a keyword. - - <7.page-head-set-to-null-string> - % cat page-head - #From: russell@ccu1.auckland.ac.nz (Russell Fulton) - #Newsgroups: comp.lang.perl - #Subject: This script causes Perl 5.00 to sementation fault - #Date: 15 Nov 1994 00:11:37 GMT - #Message-ID: <3a8ubp$jrj@net.auckland.ac.nz> - - select((select(STDOUT), $^='')[0]); #this is the critical line - $a = 'a'; - write ; - exit; - - format STDOUT = - @<<<<<< - $a - . - - % perl page-head - zsh: 1799 segmentation fault perl /tmp/page-head - - Now says - Undefined top format "main::" called at ./try line 11. - - <8.sub-as-index> - # parser bug? - % perl -le 'sub foo {0}; $x[0]=0;$x[foo]<=0' - Unterminated <> operator at -e line 1. - % perl -le 'sub foo {0}; $x[0]=0;$x[foo()]<=0' - - A right square bracket now forces expectation of an operator. - - <9.unary-minus-to-regexp-var> - % cat minus-reg - #From: Michael Cook <mcook@cognex.com> - #Newsgroups: comp.lang.perl - #Subject: bug: print -$1 - #Date: 01 Feb 1995 15:31:25 GMT - #Message-ID: <MCOOK.95Feb1103125@erawan.cognex.com> - - $_ = "123"; - /\d+/; - print $&, "\n"; - print -$&, "\n"; - print 0-$&, "\n"; - - % perl minus-reg - 123 - 123 - -123 - - Apparently already fixed in my copy. - - <10.vec-segv> - % cat vec-bug - ## Offset values are changed for my machine. - - #From: augustin@gdstech.grumman.com (Conrad Augustin) - #Subject: perl5 vec() bug? - #Message-ID: <1994Nov22.193728.25762@gdstech.grumman.com> - #Date: Tue, 22 Nov 1994 19:37:28 GMT - - #The following two statements each produce a segmentation fault in perl5: - - #vec($a, 21406, 32) = 1; # seg fault - vec($a, 42813, 16) = 1; # seg fault - - #When the offset values are one less, all's well: - #vec($a, 21405, 32) = 1; # ok - #vec($a, 42812, 16) = 1; # ok - - #Interestingly, this is ok for all high values of N: - #$N=1000000; vec($a, $N, 8) = 1; - - % perl vec-bug - zsh: 1806 segmentation fault perl vec-bug - - Can't reproduce this one. - - -NETaa13773: $/ not correctly localized in BEGIN -Files patched: perl.c - (same) - -NETaa13773: foo::bar was misparsed if foo was a reserved word -Files patched: toke.c toke.c - (same) - -NETaa13773: right square bracket didn't force expectation of operator -Files patched: toke.c - (same) - -NETaa13773: scalar ((x) x $repeat) left stack mark -Files patched: op.c - (same) - -NETaa13778: -w coredumps on <$> -From: Hans Mulder -Files patched: pp_hot.c toke.c - Now produces suggested error message. Also installed guard in warning code - that coredumped. - -NETaa13779: foreach didn't use savestack mechanism -From: Hans Mulder -Files patched: cop.h pp_ctl.c - The foreach mechanism saved the old scalar value on the context stack - rather than the savestack. It could consequently get out of sync if - unexpectedly unwound. - -NETaa13785: GIMME sometimes used wrong context frame -From: Greg Earle -Files patched: embed.h global.sym op.h pp_ctl.c proto.h - The expression inside the return was taking its context from the immediately - surrounding block rather than the innermost surrounding subroutine call. - -NETaa13797: could modify sv_undef through auto-vivification -From: Ilya Zakharevich -Files patched: pp.c - Inserted the missing check for readonly values on auto-vivification. - -NETaa13798: if (...) {print} treats print as quoted -From: Larry Wall -Files patched: toke.c - The trailing paren of the condition was setting expectations to XOPERATOR - rather than XBLOCK, so it was being treated like ${print}. - -NETaa13926: commonality was not detected in assignments using COND_EXPR -From: Mark Hanson -Files patched: opcode.h opcode.pl - The assignment compiler didn't check the 2nd and 3rd args of a ?: - for commonality. It still doesn't, but I made ?: into a "dangerous" - operator so it is forced to treat it as common. - -NETaa13957: was marking the PUSHMARK as modifiable rather than the arg -From: David Couture -Files patched: op.c sv.c - It was marking the PUSHMARK as modifiable rather than the arg. - -NETaa13962: documentation of behavior of scalar <*> was unclear -From: Tom Christiansen -Files patched: pod/perlop.pod - Added the following to perlop: - - A glob only evaluates its (embedded) argument when it is starting a new - list. All values must be read before it will start over. In a list - context this isn't important, because you automatically get them all - anyway. In a scalar context, however, the operator returns the next value - each time it is called, or a FALSE value if you've just run out. Again, - FALSE is returned only once. So if you're expecting a single value from - a glob, it is much better to say - - ($file) = <blurch*>; - - than - - $file = <blurch*>; - - because the latter will alternate between returning a filename and - returning FALSE. - - -NETaa13986: split ignored /m pattern modifier -From: Winfried Koenig -Files patched: pp.c - Fixed to work like m// and s///. - -NETaa13992: regexp comments not seen after + in non-extended regexp -From: Mark Knutsen -Files patched: regcomp.c - The code to skip regexp comments was guarded by a conditional that only - let it work when /x was in effect. - -NETaa14014: use subs should not count as definition, only as declaration -From: Keith Thompson -Files patched: sv.c - On *foo = \&bar, doesn't set GVf_IMPORTED if foo and bar are in same package. - -NETaa14021: sv_inc and sv_dec "upgraded" magical SV to non-magical -From: Paul A Sand -Also: Andreas Koenig -Files patched: sv.c - The sv_inc() and sv_dec() routines "upgraded" null magical SVs to non-magical. - -NETaa14086: require should check tainting -From: Karl Simon Berg -Files patched: pp_ctl.c - Since we shouldn't allow tainted requires anyway, it now says: - - Insecure dependency in require while running with -T switch at tst.pl line 1. - -NETaa14104: negation fails on magical variables like $1 -From: tim -Files patched: pp.c - Negation was failing on magical values like $1. It was testing the wrong - bits and also failed to provide a final "else" if none of the bits matched. - -NETaa14107: deep sort return leaked contexts -From: Quentin Fennessy -Files patched: pp_ctl.c - Needed to call dounwind() appropriately. - -NETaa14129: attempt to localize via a reference core dumps -From: Michele Sardo -Files patched: op.c pod/perldiag.pod - Now produces an error "Can't localize a reference", with explanation in - perldiag. - -NETaa14138: substr() and s/// can cause core dump -From: Andrew Vignaux -Files patched: pp_hot.c - Forgot to call SvOOK_off() on the SV before freeing its string. - -NETaa14145: ${@INC}[0] dumped core in debugger -From: Hans Mulder -Files patched: sv.c - Now croaks "Bizarre copy of ARRAY in block exit", which is better than - a core dump. The fact that ${@INC}[0] means $INC[0] outside the debugger - is a different bug. - -NETaa14147: bitwise assignment ops wipe out byte of target string -From: Jim Richardson -Files patched: doop.c - The code was assuming that the target was not either of the two operands, - which is false for an assignment operator. - -NETaa14153: lexing of lexicals in patterns fooled by character class -From: Dave Bianchi -Files patched: toke.c - It never called the dwimmer, which is how it fooled it. - -NETaa14154: allowed autoloaded methods by recognizing sub method; declaration -From: Larry Wall -Files patched: gv.c - Made sub method declaration sufficient for autoloader to stop searching on. - -NETaa14156: shouldn't optimize block scope on tainting -From: Pete Peterson -Files patched: op.c toke.c - I totally disabled the block scope optimization when running tainted. - -NETaa14157: -T and -B only allowed 1/30 "odd" characters--changed to 1/3 -From: Tor Lillqvist -Files patched: pp_sys.c - Applied suggested patch. - -NETaa14160: deref of null symbol should produce null list -From: Jared Rhine -Files patched: pp_hot.c - It didn't check for list context before returning undef. - -NETaa14162: POSIX::gensym now returns a symbol reference -From: Josh N. Pritikin -Also: Tim Bunce -Files patched: ext/POSIX/POSIX.pm - Applied suggested patch. - -NETaa14164: POSIX autoloader now distinguishes non-constant "constants" -From: Tim Bunce <Tim.Bunce@ig.co.uk> -Files patched: ext/POSIX/POSIX.pm ext/POSIX/POSIX.xs - The .xs file now distinguishes non-constant "constants" by setting EAGAIN. - This will also let us use #ifdef within the .xs file to de-constantify - any other macros that happen not to be constants even if they don't use - an argument. - -NETaa14166: missing semicolon after "my" induces core dump -From: Thomas Kofler -Files patched: toke.c - The parser was left thinking it was still processing a "my", and flubbed. - I made it wipe out the "in_my" variable on a syntax error. - -NETaa14166: missing semicolon after "my" induces core dump" -Files patched: toke.c - (same) - -NETaa14206: can now use English and strict at the same time -From: Andrew Wilcox -Files patched: sv.c - It now counts imported symbols as okay under "use strict". - -NETaa14206: can now use English and strict at the same time -Files patched: gv.c pod/perldiag.pod - (same) - -NETaa14265: elseif now produces severe warning -From: Yutao Feng -Files patched: pod/perldiag.pod toke.c - Now complains explicitly about "elseif". - -NETaa14279: list assignment propagated taintedness to independent scalars -From: Tim Freeman -Files patched: pp_hot.c - List assignment needed to be modified so that tainting didn't propagate - between independent scalar values. - -NETaa14312: undef in @EXPORTS core dumps -From: William Setzer -Files patched: lib/Exporter.pm - Now says: - - Unable to create sub named "t::" at lib/Exporter.pm line 159. - Illegal null symbol in @t::EXPORT at -e line 1 - BEGIN failed--compilation aborted at -e line 1. - - -NETaa14312: undef in @EXPORTS core dumps -Files patched: pod/perldiag.pod sv.c - (same) - -NETaa14321: literal @array check shouldn't happen inside embedded expressions -From: Mark H. Nodine -Files patched: toke.c - The general solution to this is to disable the literal @array check within - any embedded expression. For instance, this also failed bogusly: - - print "$foo{@foo}"; - - The reason fixing this also fixes the s///e problem is that the lexer - effectively puts the RHS into a do {} block, making the expression - embedded within curlies, as far as the error message is concerned. - -NETaa14322: now localizes $! during POSIX::AUTOLOAD -From: Larry Wall -Files patched: ext/POSIX/POSIX.pm - Added local $! = 0. - -NETaa14324: defined() causes spurious sub existence -From: "Andreas Koenig" -Files patched: op.c pp.c - It called pp_rv2cv which wrongly assumed it could add any sub it referenced. - -NETaa14336: use Module () forces import of nothing -From: Tim Bunce -Files patched: op.c - use Module () now refrains from calling import at all. - -NETaa14353: added special HE allocator -From: Larry Wall -Files patched: global.sym - -NETaa14353: added special HE allocator -Files patched: hv.c perl.h - -NETaa14353: array extension now converts old memory to SV storage. -Files patched: av.c av.h sv.c - -NETaa14353: hashes now convert old storage into SV arenas. -Files patched: global.sym - -NETaa14353: hashes now convert old storage into SV arenas. -Files patched: hv.c perl.h - -NETaa14353: upgraded SV arena allocation -Files patched: proto.h - -NETaa14353: upgraded SV arena allocation -Files patched: perl.c sv.c - -NETaa14422: added rudimentary prototypes -From: Gisle Aas -Files patched: Makefile.SH op.c op.c perly.c perly.c.diff perly.h perly.y proto.h sv.c toke.c - Message-Id: <9509290018.AA21548@scalpel.netlabs.com> - To: doughera@lafcol.lafayette.edu (Andy Dougherty) - Cc: perl5-porters@africa.nicoh.com - Subject: Re: Jumbo Configure patch vs. 1m. - Date: Thu, 28 Sep 95 17:18:54 -0700 - From: lwall@scalpel.netlabs.com (Larry Wall) - - : No. Larry's currently got the patch pumpkin for all such core perl topics. - - I dunno whether you should let me have the patch pumpkin or not. To fix - a Sev 2 I just hacked in rudimentary prototypes. :-) - - We can now define true unary subroutines, as well as argumentless - subroutines: - - sub baz () { 12; } # Must not have argument - sub bar ($) { $_[0] * 7 } # Must have exactly one argument - sub foo ($@) { print "@_\n" } # Must have at least one argument - foo bar baz / 2 || "oops", "is the answer"; - - This prints "42 is the answer" on my machine. That is, it's the same as - - foo( bar( baz() / 2) || "oops", "is the answer"); - - Attempting to compile - - foo; - - results in - - Too few arguments for main::foo at ./try line 8, near "foo;" - - Compiling - - bar 1,2,3; - - results in - - Too many arguments for main::bar at ./try line 8, near "foo;" - - But - - @array = ('a','b','c'); - foo @array, @array; - - prints "3 a b c" because the $ puts the first arg of foo into scalar context. - - The main win at this point is that we can say - - sub AAA () { 1; } - sub BBB () { 2; } - - and the user can say AAA + BBB and get 3. - - I'm not quite sure how this interacts with autoloading though. I fear - POSIX.pm will need to say - - sub E2BIG (); - sub EACCES (); - sub EAGAIN (); - sub EBADF (); - sub EBUSY (); - ... - sub _SC_STREAM_MAX (); - sub _SC_TZNAME_MAX (); - sub _SC_VERSION (); - - unless we can figure out how to efficiently declare a default prototype - at import time. Meaning, not using eval. Currently - - *foo = \&bar; - - (the ordinary import mechanism) implicitly stubs &bar with no prototype if - &bar is not yet declared. It's almost like you want an AUTOPROTO to - go with your AUTOLOAD. - - Another thing to rub one's 5 o'clock shadow over is that there's no way - to apply a prototype to a method call at compile time. - - And no, I don't want to have the - - sub howabout ($formal, @arguments) { ... } - - argument right now. - - Larry - -NETaa14422: couldn't take reference of a prototyped function -Files patched: op.c - (same) - -NETaa14423: use didn't allow expressions involving the scratch pad -From: Graham Barr -Files patched: op.c perly.c perly.c.diff perly.y proto.h vms/perly_c.vms - Applied suggested patch. - -NETaa14444: lexical scalar didn't autovivify -From: Gurusamy Sarathy -Files patched: op.c pp_hot.c - It didn't have code in pp_padsv to do the right thing. - -NETaa14448: caller could dump core when used within an eval or require -From: Danny R. Faught -Files patched: pp_ctl.c - caller() was incorrectly assuming the context stack contained a subroutine - context when it in fact contained an eval context. - -NETaa14451: improved error message on bad pipe filehandle -From: Danny R. Faught -Files patched: pp_sys.c - Now says the slightly more informative - - Can't use an undefined value as filehandle reference at ./try line 3. - -NETaa14462: pp_dbstate had a scope leakage on recursion suppression -From: Tim Bunce -Files patched: pp_ctl.c - Swapped the code in question around. - -NETaa14482: sv_unref freed ref prematurely at times -From: Gurusamy Sarathy -Files patched: sv.c - Made sv_unref() mortalize rather than free the old reference. - -NETaa14484: appending string to array produced bizarre results -From: Greg Ward -Also: Malcolm Beattie -Files patched: pp_hot.c - Will now say, "Can't coerce ARRAY to string". - -NETaa14525: assignment to globs didn't reset them correctly -From: Gurusamy Sarathy -Files patched: sv.c - Applied parts of patch not overridden by subsequent patch. - -NETaa14529: a partially matching subpattern could spoof infinity detector -From: Wayne Berke -Files patched: regexec.c - A partial match on a subpattern could fool the infinite regress detector - into thinking progress had been made. - The previous workaround prevented another bug (NETaa14529) from being fixed, - so I've backed it out. I'll need to think more about how to detect failure - to progress. I'm still hopeful it's not equivalent to the halting problem. - -NETaa14535: patches from Gurusamy Sarathy -From: Gurusamy Sarathy -Files patched: op.c pp.c pp_hot.c regexec.c sv.c toke.c - Applied most recent suggested patches. - -NETaa14537: select() can return too soon -From: Matt Kimball -Also: Andreas Gustafsson -Files patched: pp_sys.c - -NETaa14538: method calls were treated like do {} under loop modifiers -From: Ilya Zakharevich -Files patched: perly.c perly.y - Needed to take the OPf_SPECIAL flag off of entersubs from method reductions. - (It was probably a cut-and-paste error from long ago.) - -NETaa14540: foreach (@array) no longer does extra stack copy -From: darrinm@lmc.com -Files patched: Todo op.c pp_ctl.c pp_hot.c - Fixed by doing the foreach(@array) optimization, so it iterates - directly through the array, and can detect the implicit shift from - referencing <>. - -NETaa14541: new version of perlbug -From: Kenneth Albanowski -Files patched: README pod/perl.pod utils/perlbug.PL - Brought it up to version 1.09. - -NETaa14541: perlbug 1.11 -Files patched: utils/perlbug.PL - (same) - -NETaa14548: magic sets didn't check private OK bits -From: W. Bradley Rubenstein -Files patched: mg.c - The magic code was getting mixed up between private and public POK bits. - -NETaa14550: made ~ magic magical -From: Tim Bunce -Files patched: sv.c - Applied suggested patch. - -NETaa14551: humongous header causes infinite loop in format -From: Grace Lee -Files patched: pp_sys.c - Needed to check for page exhaustion after doing top-of-form. - -NETaa14558: attempt to call undefined top format core dumped -From: Hallvard B Furuseth -Files patched: pod/perldiag.pod pp_sys.c - Now issues an error on attempts to call a non-existent top format. - -NETaa14561: Gurusamy Sarathy's G_KEEPERR patch -From: Andreas Koenig -Also: Gurusamy Sarathy -Also: Tim Bunce -Files patched: cop.h interp.sym perl.c perl.h pp_ctl.c pp_sys.c sv.c toke.c - Applied latest patch. - -NETaa14581: shouldn't execute BEGIN when there are compilation errors -From: Rickard Westman -Files patched: op.c - Perl should not try to execute BEGIN and END blocks if there's been a - compilation error. - -NETaa14582: got SEGV sorting sparse array -From: Rick Pluta -Files patched: pp_ctl.c - Now weeds out undefined values much like Perl 4 did. - Now sorts undefined values to the front. - -NETaa14582: sort was letting unsortable values through to comparison routine -Files patched: pp_ctl.c - (same) - -NETaa14585: globs in pad space weren't properly cleaned up -From: Gurusamy Sarathy -Files patched: op.c pp.c pp_hot.c sv.c - Applied suggested patch. - -NETaa14614: now does dbmopen with perl_eval_sv() -From: The Man -Files patched: perl.c pp_sys.c proto.h - dbmopen now invokes perl_eval_sv(), which should handle error conditions - better. - -NETaa14618: exists doesn't work in GDBM_File -From: Andrew Wilcox -Files patched: ext/GDBM_File/GDBM_File.xs - Applied suggested patch. - -NETaa14619: tied() -From: Larry Wall -Also: Paul Marquess -Files patched: embed.h global.sym keywords.h keywords.pl opcode.h opcode.pl pp_sys.c toke.c - Applied suggested patch. - -NETaa14636: Jumbo Dynaloader patch -From: Tim Bunce -Files patched: ext/DynaLoader/DynaLoader.pm ext/DynaLoader/dl_dld.xs ext/DynaLoader/dl_dlopen.xs ext/DynaLoader/dl_hpux.xs ext/DynaLoader/dl_next.xs ext/DynaLoader/dl_vms.xs ext/DynaLoader/dlutils.c - Applied suggested patches. - -NETaa14637: checkcomma routine was stupid about bareword sub calls -From: Tim Bunce <Tim.Bunce@ig.co.uk> -Files patched: toke.c - The checkcomma routine was stupid about bareword sub calls. - -NETaa14639: (?i) didn't reset on runtime patterns -From: Mark A. Scheel -Files patched: op.h pp_ctl.c toke.c - It didn't distinguish between permanent flags outside the pattern and - temporary flags within the pattern. - -NETaa14649: selecting anonymous globs dumps core -From: Chip Salzenberg -Files patched: cop.h doio.c embed.h global.sym perl.c pp_sys.c proto.h - Applied suggested patch, but reversed the increment and decrement to avoid - decrementing and freeing what we're going to increment. - -NETaa14655: $? returned negative value on AIX -From: Kim Frutiger -Also: Stephen D. Lee -Files patched: pp_sys.c - Applied suggested patch. - -NETaa14668: {2,} could match once -From: Hugo van der Sanden -Files patched: regexec.c - When an internal pattern failed a conjecture, it didn't back off on the - number of times it thought it had matched. - -NETaa14673: open $undefined dumped core -From: Samuli K{rkk{inen -Files patched: pp_sys.c - pp_open() didn't check its argument for globness. - -NETaa14683: stringifies were running pad out of space -From: Robin Barker -Files patched: op.h toke.c - Increased PADOFFSET to a U32, and made lexer not put double-quoted strings - inside OP_STRINGIFY unless they really needed it. - -NETaa14689: shouldn't have . in @INC when tainting -From: William R. Somsky -Files patched: perl.c - Now does not put . into @INC when tainting. It may still be added with a - - use lib "."; - - or, to put it at the end, - - BEGIN { push(@INC, ".") } - - but this is not recommended unless a chdir to a known location has been done - first. - -NETaa14690: values inside tainted SVs were ignored -From: "James M. Stern" -Files patched: pp.c pp_ctl.c - It was assuming that a tainted value was a string. - -NETaa14692: format name required qualification under use strict -From: Tom Christiansen -Files patched: gv.c - Now treats format names the same as subroutine names. - -NETaa14695: added simple regexp caching -From: John Rowe -Files patched: pp_ctl.c - Applied suggested patch. - -NETaa14697: regexp comments were sometimes wrongly treated as literal text -From: Tom Christiansen -Files patched: regcomp.c - The literal-character grabber didn't know about extended comments. - N.B. '#' is treated as a comment character whenever the /x option is - used now, so you can't include '#' as a simple literal in /x regexps. - - (By the way, Tom, the boxed form of quoting in the previous enclosure is - exceeding antisocial when you want to extract the code from it.) - -NETaa14704: closure got wrong outer scope if outer sub was predeclared -From: Marc Paquette -Files patched: op.c - The outer scope of the anonymous sub was set to the stub rather than to - the actual subroutine. I kludged it by making the outer scope of the - stub be the actual subroutine, if anything is depending on the stub. - -NETaa14705: $foo .= $foo did free memory read -From: Gerd Knops -Files patched: sv.c - Now modifies address to copy if it was reallocated. - -NETaa14709: Chip's FileHandle stuff -From: Larry Wall -Also: Chip Salzenberg -Files patched: MANIFEST ext/FileHandle/FileHandle.pm ext/FileHandle/FileHandle.xs ext/FileHandle/Makefile.PL ext/POSIX/POSIX.pm ext/POSIX/POSIX.pod ext/POSIX/POSIX.xs lib/FileCache.pm lib/Symbol.pm t/lib/filehand.t t/lib/posix.t - Applied suggested patches. - -NETaa14711: added (&) and (*) prototypes for blocks and symbols -From: Kenneth Albanowski -Files patched: Makefile.SH op.c perly.c perly.h perly.y toke.c - & now means that it must have an anonymous sub as that argument. If - it's the first argument, the sub may be specified as a block in the - indirect object slot, much like grep or sort, which have prototypes of (&@). - - Also added * so you can do things like - - sub myopen (*;$); - - myopen(FOO, $filename); - -NETaa14713: setuid FROM root now defaults to not do tainting -From: Tony Camas -Files patched: mg.c perl.c pp_hot.c - Applied suggested patch. - -NETaa14714: duplicate magics could be added to an SV -From: Yary Hluchan -Files patched: sv.c sv.c - The sv_magic() routine didn't properly check to see if it already had a - magic of that type. Ordinarily it would have, but it was called during - mg_get(), which forces the magic flags off temporarily. - -NETaa14721: sub defined during erroneous do-FILE caused core dump -From: David Campbell -Files patched: op.c - Fixed the seg fault. I couldn't reproduce the return problem. - -NETaa14734: ref should never return undef -From: Dale Amon -Files patched: pp.c t/op/overload.t - Now returns null string. - -NETaa14751: slice of undefs now returns null list -From: Tim Bunce -Files patched: pp.c pp_hot.c - Null list clobberation is now done in lslice, not aassign. - -NETaa14789: select coredumped on Linux -From: Ulrich Kunitz -Files patched: pp_sys.c - Applied suggested patches, more or less. - -NETaa14789: straightened out ins and out of duping -Files patched: lib/IPC/Open3.pm - (same) - -NETaa14791: implemented internal SUPER class -From: Nick Ing-Simmons -Also: Dean Roehrich -Files patched: gv.c - Applied suggested patch. - -NETaa14845: s/// didn't handle offset strings -From: Ken MacLeod -Files patched: pp_ctl.c - Needed a call to SvOOK_off(targ) in pp_substcont(). - -NETaa14851: Use of << to mean <<"" is deprecated -From: Larry Wall -Files patched: toke.c - -NETaa14865: added HINT_BLOCK_SCOPE to "elsif" -From: Jim Avera -Files patched: perly.y - Needed to set HINT_BLOCK_SCOPE on "elsif" to prevent the do block from - being optimized away, which caused the statement transition in elsif - to reset the stack too far back. - -NETaa14876: couldn't delete localized GV safely -From: John Hughes -Files patched: pp.c scope.c - The reference count of the "borrowed" GV needed to be incremented while - there was a reference to it in the savestack. - -NETaa14887: couldn't negate magical scalars -From: ian -Also: Gurusamy Sarathy -Files patched: pp.c - Applied suggested patch, more or less. (It's not necessary to test both - SvNIOK and SvNIOKp, since the private bits are always set if the public - bits are set.) - -NETaa14893: /m modifier was sticky -From: Jim Avera -Files patched: pp_ctl.c - pp_match() and pp_subst() were using an improperly scoped SAVEINT to restore - the value of the internal variable multiline. - -NETaa14893: /m modifier was sticky -Files patched: cop.h pp_hot.c - (same) - -NETaa14916: complete.pl retained old return value -From: Martyn Pearce -Files patched: lib/complete.pl - Applied suggested patch. - -NETaa14928: non-const 3rd arg to split assigned to list could coredump -From: Hans de Graaff -Files patched: op.c - The optimizer was assuming the OP was an OP_CONST. - -NETaa14942: substr as lvalue could disable magic -From: Darrell Kindred <dkindred+@cmu.edu> -Files patched: pp.c - The substr was disabling the magic of $1. - -NETaa14990: "not" not parseable when expecting term -From: "Randal L. Schwartz" -Files patched: perly.c perly.c.diff perly.y vms/perly_c.vms - The NOTOP production needed to be moved down into the terms. - -NETaa14993: Bizarre copy of formline -From: Tom Christiansen -Also: Charles Bailey -Files patched: sv.c - Applied suggested patch. - -NETaa14998: sv_add_arena() no longer leaks memory -From: Andreas Koenig -Files patched: av.c hv.c perl.h sv.c - Now keeps one potential arena "on tap", but doesn't use it unless there's - demand for SV headers. When an AV or HV is extended, its old memory - becomes the next potential arena unless there already is one, in which - case it is simply freed. This will have the desired property of not - stranding medium-sized chunks of memory when extending a single array - repeatedly, but will not degrade when there's no SV demand beyond keeping - one chunk of memory on tap, which generally will be about 250 bytes big, - since it prefers the earlier freed chunk over the later. See the nice_chunk - variable. - -NETaa14999: $a and $b now protected from use strict and lexical declaration -From: Tom Christiansen -Files patched: gv.c pod/perldiag.pod toke.c - Bare $a and $b are now allowed during "use strict". In addition, - the following diag was added: - - =item Can't use "my %s" in sort comparison - - (F) The global variables $a and $b are reserved for sort comparisons. - You mentioned $a or $b in the same line as the <=> or cmp operator, - and the variable had earlier been declared as a lexical variable. - Either qualify the sort variable with the package name, or rename the - lexical variable. - - -NETaa15034: use strict refs should allow calls to prototyped functions -From: Roderick Schertler -Files patched: perly.c perly.c.diff perly.y toke.c vms/perly_c.vms - Applied patch suggested by Chip. - -NETaa15083: forced $AUTOLOAD to be untainted -From: Tim Bunce -Files patched: gv.c pp_hot.c - Stripped any taintmagic from $AUTOLOAD after setting it. - -NETaa15084: patch for Term::Cap -From: Mark Kaehny -Also: Hugo van der Sanden -Files patched: lib/Term/Cap.pm - Applied suggested patch. - -NETaa15086: null pattern could cause coredump in s//_$1_/ -From: "Paul E. Maisano" -Files patched: cop.h pp_ctl.c - If the replacement pattern was complicated enough to cause pp_substcont - to be called, then it lost track of which REGEXP* it was supposed to - be using. - -NETaa15087: t/io/pipe.t didn't work on AIX -From: Andy Dougherty -Files patched: t/io/pipe.t - Applied suggested patch. - -NETaa15088: study was busted -From: Hugo van der Sanden -Files patched: opcode.h opcode.pl pp.c - It was studying its scratch pad target rather than the argument supplied. - -NETaa15090: MSTATS patch -From: Tim Bunce -Files patched: global.sym malloc.c perl.c perl.h proto.h - Applied suggested patch. - -NETaa15098: longjmp out of magic leaks memory -From: Chip Salzenberg -Files patched: mg.c sv.c - Applied suggested patch. - -NETaa15102: getpgrp() is broken if getpgrp2() is available -From: Roderick Schertler -Files patched: perl.h pp_sys.c - Applied suggested patch. - -NETaa15103: prototypes leaked opcodes -From: Chip Salzenberg -Files patched: op.c - Applied suggested patch. - -NETaa15107: quotameta memory bug on all metacharacters -From: Chip Salzenberg -Files patched: pp.c - Applied suggested patch. - -NETaa15108: Fix for incomplete string leak -From: Chip Salzenberg -Files patched: toke.c - Applied suggested patch. - -NETaa15110: couldn't use $/ with 8th bit set on some architectures -From: Chip Salzenberg -Files patched: doop.c interp.sym mg.c op.c perl.c perl.h pp_ctl.c pp_hot.c pp_sys.c sv.c toke.c util.c - Applied suggested patches. - -NETaa15112: { a_1 => 2 } didn't parse as expected -From: Stuart M. Weinstein -Files patched: toke.c - The little dwimmer was only skipping ALPHA rather than ALNUM chars. - -NETaa15123: bitwise ops produce spurious warnings -From: Hugo van der Sanden -Also: Chip Salzenberg -Also: Andreas Gustafsson -Files patched: sv.c - Decided to suppress the warning in the conversion routines if merely converting - a temporary, which can never be a user-supplied value anyway. - -NETaa15129: #if defined (foo) misparsed in h2ph -From: Roderick Schertler <roderick@gate.net> -Files patched: utils/h2ph.PL - Applied suggested patch. - -NETaa15131: some POSIX functions assumed valid filehandles -From: Chip Salzenberg -Files patched: ext/POSIX/POSIX.xs - Applied suggested patch. - -NETaa15151: don't optimize split on OPpASSIGN_COMMON -From: Huw Rogers -Files patched: op.c - Had to swap the optimization down to after the assignment op is generated - and COMMON is calculated, and then clean up the resultant tree differently. - -NETaa15154: MakeMaker-5.18 -From: Andreas Koenig -Files patched: MANIFEST lib/ExtUtils/Liblist.pm lib/ExtUtils/MM_VMS.pm lib/ExtUtils/MakeMaker.pm lib/ExtUtils/Mksymlists.pm - Brought it up to 5.18. - -NETaa15156: some Exporter tweaks -From: Roderick Schertler -Also: Tim Bunce -Files patched: lib/Exporter.pm - Also did Tim's Tiny Trivial patch. - -NETaa15157: new version of Test::Harness -From: Andreas Koenig -Files patched: lib/Test/Harness.pm - Applied suggested patch. - -NETaa15175: overloaded nomethod has garbage 4th op -From: Ilya Zakharevich -Files patched: gv.c - Applied suggested patch. - -NETaa15179: SvPOK_only shouldn't back off on offset pointer -From: Gutorm.Hogasen@oslo.teamco.telenor.no -Files patched: sv.h - SvPOK_only() was calling SvOOK_off(), which adjusted the string pointer - after tr/// has already acquired it. It shouldn't really be necessary - for SvPOK_only() to undo an offset string pointer, since there's no - conflict with a possible integer value where the offset is stored. - -NETaa15193: & now always bypasses prototype checking -From: Larry Wall -Files patched: dump.c op.c op.h perly.c perly.c.diff perly.y pod/perlsub.pod pp_hot.c proto.h toke.c vms/perly_c.vms vms/perly_h.vms - Turned out to be a big hairy deal because the lexer turns foo() into &foo(). - But it works consistently now. Also fixed pod. - -NETaa15197: 5.002b2 is 'appending' to $@ -From: Gurusamy Sarathy -Files patched: pp_ctl.c - Applied suggested patch. - -NETaa15201: working around Linux DBL_DIG problems -From: Kenneth Albanowski -Files patched: hints/linux.sh sv.c - Applied suggested patch. - -NETaa15208: SelectSaver -From: Chip Salzenberg -Files patched: MANIFEST lib/SelectSaver.pm - Applied suggested patch. - -NETaa15209: DirHandle -From: Chip Salzenberg -Files patched: MANIFEST lib/DirHandle.pm t/lib/dirhand.t - -NETaa15210: sysopen() -From: Chip Salzenberg -Files patched: doio.c keywords.pl lib/ExtUtils/typemap opcode.pl pod/perlfunc.pod pp_hot.c pp_sys.c proto.h toke.c - Applied suggested patch. Hope it works... - -NETaa15211: use mnemonic names in Safe setup -From: Chip Salzenberg -Files patched: ext/Safe/Safe.pm - Applied suggested patch, more or less. - -NETaa15214: prototype() -From: Chip Salzenberg -Files patched: ext/Safe/Safe.pm global.sym keywords.pl opcode.pl pp.c toke.c - Applied suggested patch. - -NETaa15217: -w problem with -d:foo -From: Tim Bunce -Files patched: perl.c - Applied suggested patch. - -NETaa15218: *GLOB{ELEMENT} -From: Larry Wall -Files patched: Makefile.SH embed.h ext/Safe/Safe.pm keywords.h opcode.h opcode.h opcode.pl perly.c perly.c.diff perly.y pp_hot.c t/lib/safe.t vms/perly_c.vms - -NETaa15219: Make *x=\*y do like *x=*y -From: Chip Salzenberg -Files patched: sv.c - Applied suggested patch. - -NETaa15221: Indigestion with Carp::longmess and big eval '...'s -From: Tim Bunce -Files patched: lib/Carp.pm - Applied suggested patch. - -NETaa15222: VERSION patch for standard extensions -From: Paul Marquess -Files patched: ext/DB_File/Makefile.PL ext/DynaLoader/DynaLoader.pm ext/DynaLoader/Makefile.PL ext/Fcntl/Fcntl.pm ext/Fcntl/Makefile.PL ext/GDBM_File/GDBM_File.pm ext/GDBM_File/Makefile.PL ext/NDBM_File/Makefile.PL ext/NDBM_File/NDBM_File.pm ext/ODBM_File/Makefile.PL ext/ODBM_File/ODBM_File.pm ext/POSIX/Makefile.PL ext/POSIX/POSIX.pm ext/SDBM_File/Makefile.PL ext/SDBM_File/SDBM_File.pm ext/Safe/Makefile.PL ext/Safe/Safe.pm ext/Socket/Makefile.PL - Applied suggested patch. - -NETaa15222: VERSION patch for standard extensions (reprise) -Files patched: ext/DB_File/DB_File.pm ext/DynaLoader/DynaLoader.pm ext/Fcntl/Fcntl.pm ext/GDBM_File/GDBM_File.pm ext/NDBM_File/NDBM_File.pm ext/ODBM_File/ODBM_File.pm ext/POSIX/POSIX.pm ext/SDBM_File/SDBM_File.pm ext/Safe/Safe.pm ext/Socket/Socket.pm - (same) - -NETaa15227: $i < 10000 should optimize to integer op -From: Larry Wall -Files patched: op.c op.c - The program - - for ($i = 0; $i < 100000; $i++) { - push @foo, $i; - } - - takes about one quarter the memory if the optimizer decides that it can - use an integer < comparison rather than floating point. It now does so - if one side is an integer constant and the other side a simple variable. - This should really help some of our benchmarks. You can still force a - floating point comparison by using 100000.0 instead. - -NETaa15228: CPerl-mode patch -From: Ilya Zakharevich -Files patched: emacs/cperl-mode.el - Applied suggested patch. - -NETaa15231: Symbol::qualify() -From: Chip Salzenberg -Files patched: ext/FileHandle/FileHandle.pm gv.c lib/SelectSaver.pm lib/Symbol.pm pp_hot.c - Applied suggested patch. - -NETaa15236: select select broke under use strict -From: Chip Salzenberg -Files patched: op.c - Instead of inventing a new bit, I just turned off the HINT_STRICT_REFS bit. - I don't think it's worthwhile distinguishing between qualified or unqualified - names to select. - -NETaa15237: use vars -From: Larry Wall -Files patched: MANIFEST gv.c lib/subs.pm lib/vars.pm sv.c - -NETaa15240: keep op names _and_ descriptions -From: Chip Salzenberg -Files patched: doio.c embed.h ext/Safe/Safe.pm ext/Safe/Safe.xs global.sym op.c opcode.h opcode.pl scope.c sv.c - Applied suggested patch. - -NETaa15259: study doesn't unset on string modification -From: Larry Wall -Files patched: mg.c pp.c - Piggybacked on m//g unset magic to unset the study too. - -NETaa15276: pick a better initial cxstack_max -From: Chip Salzenberg -Files patched: perl.c - Added fudge in, and made it calculate how many it could fit into (most of) 8K, - to avoid getting 16K of Kingsley malloc. - -NETaa15287: numeric comparison optimization adjustments -From: Clark Cooper -Files patched: op.c - Applied patch suggested by Chip, with liberalization to >= and <=. - -NETaa15299: couldn't eval string containing pod or __DATA__ -From: Andreas Koenig -Also: Gisle Aas -Files patched: toke.c - Basically, eval didn't know how to bypass pods correctly. - -NETaa15300: sv_backoff problems -From: Paul Marquess -Also: mtr -Also: Chip Salzenberg -Files patched: op.c sv.c sv.h - Applied suggested patch. - -NETaa15312: Avoid fclose(NULL) -From: Chip Salzenberg -Files patched: toke.c - Applied suggested patch. - -NETaa15318: didn't set up perl_init_i18nl14n for export -From: Ilya Zakharevich -Files patched: perl_exp.SH - Applied suggested patch. - -NETaa15331: File::Path::rmtree followed symlinks -From: Andreas Koenig -Files patched: lib/File/Path.pm - Added suggested patch, except I did - - if (not -l $root and -d _) { - - for efficiency, since if -d is true, the -l already called lstat on it. - -NETaa15339: sv_gets() didn't reset count -From: alanburlison@unn.unisys.com -Files patched: sv.c - Applied suggested patch. - -NETaa15341: differentiated importation of different types -From: Chip Salzenberg -Files patched: gv.c gv.h op.c perl.c pp.c pp_ctl.c sv.c sv.h toke.c - Applied suggested patch. - -NETaa15342: Consistent handling of e_{fp,tmpname} -From: Chip Salzenberg -Files patched: perl.c pp_ctl.c util.c - Applied suggested patch. - -NETaa15344: Safe gets confused about malloc on AIX -From: Tim Bunce -Files patched: ext/Safe/Safe.xs - Applied suggested patch. - -NETaa15348: -M upgrade -From: Tim Bunce -Files patched: perl.c pod/perlrun.pod - Applied suggested patch. - -NETaa15369: change in split optimization broke scalar context -From: Ulrich Pfeifer -Files patched: op.c - The earlier patch to make the split optimization pay attention to - OPpASSIGN_COMMON rearranged how the syntax tree is constructed, but kept - the wrong context flags. This causes pp_split() do do the wrong thing. - -NETaa15423: can't do subversion numbering because of %5.3f assumptions -From: Andy Dougherty -Files patched: configpm patchlevel.h perl.c perl.h pp_ctl.c - Removed the %5.3f assumptions where appropriate. patchlevel.h now - defines SUBVERSION, which if greater than 0 indicates a development version. - -NETaa15424: Sigsetjmp patch -From: Kenneth Albanowski -Files patched: Configure config_h.SH op.c perl.c perl.h pp_ctl.c util.c - Applied suggested patch. - -Needed to make install paths absolute. -Files patched: installperl - -h2xs 1.14 -Files patched: utils/h2xs.PL - -makedir() looped on a symlink to a directory. -Files patched: installperl - -xsubpp 1.932 -Files patched: lib/ExtUtils/xsubpp - ----------------------------------------------------------------- -Summary of user-visible Configure and build changes since 5.001: ----------------------------------------------------------------- - -Yet more enhancements and fixes have been made to the Configure and -build process for perl. Most of these will not be visible to the -ordinary user--they just make the process more robust and likely to -work on a wider range of platforms. - -This is a brief summary of the most important changes. A more -detailed description is given below. - - Slightly changed installation directories. See INSTALL. - - Include 5.000 - 5.001 upgrage notes :-) (see below). You might - want to read through them as well as these notes. - - Install documentation for perl modules and pod2* translators. You can - now view perl module documentation with either your system's man(1) - program or with the supplied perldoc script. - - Many hint file updates. - - Improve and simplify detection of local libraries and header files. - - Expand documentation of installation process in new INSTALL file. - - Try to reduce Unixisms (such as SH file extraction) to enhance - portability to other platforms. There's still a long way to go. - -Upgrade Traps and Pitfalls: - -Since a lot has changed in the build process, you are probably best off -starting with a fresh copy of the perl5.002 sources. In particular, -your 5.000 or 5.001 config.sh will contain several variables that are no -longer needed. Further, improvements in the Configure tests may mean -that some of the answers will be different than they were in previous -versions, and which answer to keep can be difficult to sort out. -Therefore, you are probably better off ignoring your old config.sh, as -in the following: - - make -k distclean # (if you've built perl before) - rm -f config.sh # (in case distclean mysteriously fails) - sh Configure [whatever options you like] - make depend - make - make test - -This, and much more, is described in the new INSTALL file. - -Here are the detailed changes from 5.002beta1 to 5.002b2 in -reverse chronolgical order: - -------------- -Version 5.002beta2 -------------- - -This is patch.2b2 to perl5.002beta1. -This takes you from 5.002beta1h to 5.002beta2. - -Renaming this as beta2 reflects _my_ feeling that it's time to -wrap up things for the release of 5.002. - -Index: Changes.Conf - - Include changes from patches 2b1a .. 2b1h, as well as this - patch. - -Index: Configure - - Use nm -D on Linux with shared libraries, if the system - supports nm -D. - -Prereq: 3.0.1.8 -*** perl5.002b1h/Configure Thu Jan 4 11:14:37 1996 ---- perl5.002b2/Configure Thu Jan 11 17:09:13 1996 - -Index: MANIFEST - - Include Stub Readline library as part of new debugger. - - Include hints file dec_osf for ODBM_File extension. - -*** perl5.002b1h/MANIFEST Wed Jan 3 14:37:54 1996 ---- perl5.002b2/MANIFEST Sat Jan 13 16:30:43 1996 - -Index: configpm - - Updates from Tim's -m/-M/-V patch. - -*** perl5.002b1h/configpm Tue Oct 31 11:51:52 1995 ---- perl5.002b2/configpm Fri Jan 12 10:53:34 1996 - -Index: doop.c - - Chip's patch to use STDCHAR and U8 nearly everywhere instead of - assuming 8-bit chars or ~(char) 0 == 0xff. - -*** perl5.002b1h/doop.c Wed Nov 15 15:08:01 1995 ---- perl5.002b2/doop.c Fri Jan 12 15:05:04 1996 - -Index: embed.h - - Updates from Tim's -m/-M/-V patch. - -*** perl5.002b1h/embed.h Thu Jan 4 13:28:08 1996 ---- perl5.002b2/embed.h Fri Jan 12 15:09:11 1996 - -Index: ext/DB_File/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/DB_File/Makefile.PL Tue Nov 14 14:14:17 1995 ---- perl5.002b2/ext/DB_File/Makefile.PL Tue Jan 9 16:54:17 1996 - -*** perl5.002b1h/ext/DB_File/Makefile.PL Tue Nov 14 14:14:17 1995 ---- perl5.002b2/ext/DB_File/Makefile.PL Sat Jan 13 17:07:11 1996 - -Index: ext/DynaLoader/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/DynaLoader/Makefile.PL Tue Jun 6 12:24:37 1995 ---- perl5.002b2/ext/DynaLoader/Makefile.PL Sat Jan 13 17:16:34 1996 - -Index: ext/Fcntl/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/Fcntl/Makefile.PL Thu Jan 19 18:58:52 1995 ---- perl5.002b2/ext/Fcntl/Makefile.PL Sat Jan 13 17:16:38 1996 - -Index: ext/GDBM_File/GDBM_File.pm - - Make the NAME section a legal paragraph. - -*** perl5.002b1h/ext/GDBM_File/GDBM_File.pm Mon Nov 20 10:22:26 1995 ---- perl5.002b2/ext/GDBM_File/GDBM_File.pm Fri Jan 12 16:11:38 1996 - -Index: ext/GDBM_File/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/GDBM_File/Makefile.PL Wed Feb 22 14:36:36 1995 ---- perl5.002b2/ext/GDBM_File/Makefile.PL Sat Jan 13 17:08:02 1996 - -Index: ext/NDBM_File/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/NDBM_File/Makefile.PL Wed Feb 22 14:36:39 1995 ---- perl5.002b2/ext/NDBM_File/Makefile.PL Sat Jan 13 17:08:13 1996 - -Index: ext/ODBM_File/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/ODBM_File/Makefile.PL Mon Jun 5 15:03:44 1995 ---- perl5.002b2/ext/ODBM_File/Makefile.PL Sat Jan 13 17:08:22 1996 - -Index: ext/ODBM_File/hints/dec_osf.pl - - New file. - -*** /dev/null Sat Jan 13 16:48:01 1996 ---- perl5.002b2/ext/ODBM_File/hints/dec_osf.pl Sat Jan 13 16:30:01 1996 - -Index: ext/POSIX/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/POSIX/Makefile.PL Thu Jan 19 18:59:00 1995 ---- perl5.002b2/ext/POSIX/Makefile.PL Sat Jan 13 17:08:27 1996 - -Index: ext/SDBM_File/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/SDBM_File/Makefile.PL Tue Nov 14 11:16:43 1995 ---- perl5.002b2/ext/SDBM_File/Makefile.PL Sat Jan 13 17:16:49 1996 - -Index: ext/SDBM_File/sdbm/sdbm.c - - Give correct prototype for free. - -Prereq: 1.16 -*** perl5.002b1h/ext/SDBM_File/sdbm/sdbm.c Mon Nov 13 23:01:41 1995 ---- perl5.002b2/ext/SDBM_File/sdbm/sdbm.c Fri Jan 12 10:33:32 1996 - -Index: ext/Safe/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/Safe/Makefile.PL Tue Jan 2 15:43:53 1996 ---- perl5.002b2/ext/Safe/Makefile.PL Sat Jan 13 17:08:45 1996 - -Index: ext/Safe/Safe.pm - - Patch from Andreas. - -*** perl5.002b1h/ext/Safe/Safe.pm Tue Jan 2 15:45:27 1996 ---- perl5.002b2/ext/Safe/Safe.pm Fri Jan 12 10:52:33 1996 - -Index: ext/Safe/Safe.xs - - Patch for older compilers which had namespace confusion. - -*** perl5.002b1h/ext/Safe/Safe.xs Tue Jan 2 15:45:27 1996 ---- perl5.002b2/ext/Safe/Safe.xs Fri Jan 5 14:27:47 1996 - -Index: ext/Socket/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/Socket/Makefile.PL Sat Dec 2 16:23:52 1995 ---- perl5.002b2/ext/Socket/Makefile.PL Sat Jan 13 17:08:52 1996 - -Index: ext/Socket/Socket.xs - - Use unsigned shorts for ports. - -*** perl5.002b1h/ext/Socket/Socket.xs Sat Dec 2 15:46:20 1995 ---- perl5.002b2/ext/Socket/Socket.xs Mon Jan 8 21:59:52 1996 - -Index: global.sym - - Updates from Tim's -m/-M/-V patch. - -*** perl5.002b1h/global.sym Wed Jan 3 12:01:59 1996 ---- perl5.002b2/global.sym Fri Jan 12 10:53:34 1996 - -Index: gv.c - - Avoid VMS sprintf bug with buffers >1024. - -*** perl5.002b1h/gv.c Fri Dec 8 10:37:22 1995 ---- perl5.002b2/gv.c Fri Jan 12 15:27:27 1996 - -Index: hints/aix.sh - - Updated - -*** perl5.002b1h/hints/aix.sh Mon Nov 13 23:03:33 1995 ---- perl5.002b2/hints/aix.sh Fri Jan 12 12:09:48 1996 - -Index: hints/irix_5.sh - - Updated - -*** perl5.002b1h/hints/irix_5.sh Tue Jan 2 14:53:52 1996 ---- perl5.002b2/hints/irix_5.sh Tue Jan 9 16:05:11 1996 - -Index: hints/linux.sh - - Updated - -*** perl5.002b1h/hints/linux.sh Fri Jun 2 10:20:55 1995 ---- perl5.002b2/hints/linux.sh Fri Jan 12 11:43:52 1996 - -Index: hints/machten.sh - - Updated - -*** perl5.002b1h/hints/machten.sh Sun Mar 12 02:36:04 1995 ---- perl5.002b2/hints/machten.sh Wed Jan 10 14:53:32 1996 - -Index: installman - - Use File::Path::mkpath instead of our own makedir(). - ./perl installman --man1dir=man1 could lead to infinte recursion - in old makedir() routine. Use the standard library instead. - -*** perl5.002b1h/installman Thu Dec 28 16:06:11 1995 ---- perl5.002b2/installman Thu Jan 11 16:12:30 1996 - -Index: installperl - - Use File::Path::mkpath instead of our own makedir(). - -*** perl5.002b1h/installperl Wed Jan 3 14:33:57 1996 ---- perl5.002b2/installperl Thu Jan 11 16:12:16 1996 - -Index: interp.sym - - Updates from Tim's -m/-M/-V patch. - -*** perl5.002b1h/interp.sym Fri Nov 10 17:17:32 1995 ---- perl5.002b2/interp.sym Fri Jan 12 15:05:04 1996 - -Index: lib/AutoLoader.pm - - Undo Tim's tainting patch from beta1h. - -*** perl5.002b1h/lib/AutoLoader.pm Tue Jan 2 16:10:36 1996 ---- perl5.002b2/lib/AutoLoader.pm Fri Jan 5 16:02:28 1996 - -Index: lib/Carp.pm -*** perl5.002b1h/lib/Carp.pm Tue Jan 2 12:10:38 1996 ---- perl5.002b2/lib/Carp.pm Fri Jan 12 11:23:31 1996 - -Index: lib/ExtUtils/MM_VMS.pm - - Updated to MakeMaker-5.16. - -*** perl5.002b1h/lib/ExtUtils/MM_VMS.pm Tue Jan 2 14:07:10 1996 ---- perl5.002b2/lib/ExtUtils/MM_VMS.pm Thu Jan 4 21:00:46 1996 - -Index: lib/ExtUtils/MakeMaker.pm - - Updated to MakeMaker-5.16. - -Prereq: 1.129 -*** perl5.002b1h/lib/ExtUtils/MakeMaker.pm Tue Jan 2 14:07:10 1996 ---- perl5.002b2/lib/ExtUtils/MakeMaker.pm Wed Jan 10 16:13:05 1996 - -Index: lib/File/Find.pm - - Fixed exporting of symbols to work. - -*** perl5.002b1h/lib/File/Find.pm Wed Nov 15 15:20:03 1995 ---- perl5.002b2/lib/File/Find.pm Wed Jan 10 14:46:24 1996 - -Index: lib/I18N/Collate.pm - - Updated documentation to match program. - -*** perl5.002b1h/lib/I18N/Collate.pm Fri Jun 2 11:30:49 1995 ---- perl5.002b2/lib/I18N/Collate.pm Fri Jan 5 16:05:26 1996 - -Index: lib/Term/ReadLine.pm - - Stub new file to interface to various readline packages, or - give stub functions if none are found. - -*** /dev/null Sat Jan 13 16:48:01 1996 ---- perl5.002b2/lib/Term/ReadLine.pm Fri Jan 12 11:23:31 1996 - -Index: lib/dumpvar.pl - - Ilya's new debugger. - -*** perl5.002b1h/lib/dumpvar.pl Tue Oct 18 12:36:00 1994 ---- perl5.002b2/lib/dumpvar.pl Fri Jan 12 11:23:31 1996 - -Index: lib/perl5db.pl - - Ilya's new debugger. - -*** perl5.002b1h/lib/perl5db.pl Tue Jan 2 16:30:33 1996 ---- perl5.002b2/lib/perl5db.pl Fri Jan 12 11:23:31 1996 - -Index: lib/sigtrap.pm - - Ilya's new debugger. - -*** perl5.002b1h/lib/sigtrap.pm Thu May 25 11:20:13 1995 ---- perl5.002b2/lib/sigtrap.pm Fri Jan 12 11:23:31 1996 - -Index: miniperlmain.c - - More robust i18nl14n() function from jhi. - -*** perl5.002b1h/miniperlmain.c Thu Jan 4 12:03:37 1996 ---- perl5.002b2/miniperlmain.c Mon Jan 8 22:00:19 1996 - -Index: myconfig - - Updates from Tim's -m/-M/-V patch. - -*** perl5.002b1h/myconfig Tue Apr 4 12:13:21 1995 ---- perl5.002b2/myconfig Fri Jan 12 10:53:35 1996 - -Index: op.c - - Chip's U8/STDCHAR patch. - -*** perl5.002b1h/op.c Wed Jan 3 14:17:01 1996 ---- perl5.002b2/op.c Fri Jan 12 15:05:05 1996 - -Index: perl.c - - Change Copyright date to include 1996. Hope you don't mind. - - Presumptively call this beta2. - -*** perl5.002b1h/perl.c Thu Jan 4 15:13:53 1996 ---- perl5.002b2/perl.c Fri Jan 12 15:05:05 1996 - -Index: perl.h - - Updates from Tim's -m/-M/-V patch. - -*** perl5.002b1h/perl.h Wed Jan 3 12:21:55 1996 ---- perl5.002b2/perl.h Fri Jan 12 15:05:04 1996 - -Index: pod/Makefile - - Use PERL=../miniperl - -*** perl5.002b1h/pod/Makefile Wed Jan 3 15:06:41 1996 ---- perl5.002b2/pod/Makefile Fri Jan 5 14:14:30 1996 - -Index: pod/perlembed.pod - - Give correct usage for the 5th arg to perl_parse (don't pass - env). - -*** perl5.002b1h/pod/perlembed.pod Thu Dec 28 16:34:07 1995 ---- perl5.002b2/pod/perlembed.pod Tue Jan 9 16:02:51 1996 - -Index: pod/perlfunc.pod - - Work around a pod2man complaint about the -X function. - -*** perl5.002b1h/pod/perlfunc.pod Tue Jan 2 15:39:26 1996 ---- perl5.002b2/pod/perlfunc.pod Fri Jan 12 11:04:15 1996 - -*** perl5.002b1h/pod/perlfunc.pod Tue Jan 2 15:39:26 1996 ---- perl5.002b2/pod/perlfunc.pod Fri Jan 12 11:04:15 1996 - -Index: pod/perlovl.pod - - Add DESCRIPTION to head1 line. - -*** perl5.002b1h/pod/perlovl.pod Thu Dec 28 16:34:13 1995 ---- perl5.002b2/pod/perlovl.pod Thu Jan 11 17:11:16 1996 - -Index: pod/perlrun.pod - - Updates from Tim's -m/-M/-V patch. - -*** perl5.002b1h/pod/perlrun.pod Thu Dec 28 16:34:15 1995 ---- perl5.002b2/pod/perlrun.pod Fri Jan 12 10:53:35 1996 - -Index: pp_ctl.c - - Debugger patch. - -*** perl5.002b1h/pp_ctl.c Wed Jan 3 12:23:13 1996 ---- perl5.002b2/pp_ctl.c Fri Jan 12 15:05:05 1996 - -Index: t/lib/posix.t - - Not having POSIX shouldn't result in test failing TEST harness. - -*** perl5.002b1h/t/lib/posix.t Mon Jan 16 22:27:33 1995 ---- perl5.002b2/t/lib/posix.t Tue Jan 9 15:33:14 1996 - -Index: t/lib/safe.t - - Not having Safe shouldn't result in test failing TEST harness. - -*** perl5.002b1h/t/lib/safe.t Tue Jan 2 15:43:53 1996 ---- perl5.002b2/t/lib/safe.t Tue Jan 9 15:35:43 1996 - -Index: t/lib/socket.t - - Not having Socket shouldn't result in test failing TEST harness. - -*** perl5.002b1h/t/lib/socket.t Fri Dec 8 11:16:01 1995 ---- perl5.002b2/t/lib/socket.t Tue Jan 9 15:35:51 1996 - -Index: t/op/time.t - - Test missed year-end wrap-around by one day. - -*** perl5.002b1h/t/op/time.t Tue Oct 18 12:46:31 1994 ---- perl5.002b2/t/op/time.t Wed Jan 10 16:04:41 1996 - -Index: toke.c - - Chip's U8/STDCHAR patch. - - Tim's "add a ; after PERL5DB" patch. - -*** perl5.002b1h/toke.c Wed Dec 6 13:24:19 1995 ---- perl5.002b2/toke.c Fri Jan 12 15:05:06 1996 - -Index: utils/h2xs.PL - - Updated to 1.13. Include Changes template file. - -*** perl5.002b1h/utils/h2xs.PL Tue Jan 2 13:50:55 1996 ---- perl5.002b2/utils/h2xs.PL Thu Jan 11 16:59:48 1996 - -Index: writemain.SH - - Updates from Tim's -m/-M/-V patch. - -*** perl5.002b1h/writemain.SH Sat Nov 18 15:51:55 1995 ---- perl5.002b2/writemain.SH Fri Jan 12 10:53:35 1996 - -------------- -Version 5.002b1h -------------- - -This is patch.2b1h to perl5.002beta1. This is mainly a clean-up -patch. No progress is made dealing with memory leaks or -optimizations, though I have used #define STRANGE_MALLOC to -work around at least some problems. - -Index: Configure - - Upgraded to metaconfig patchlevel 60. - - Add in usesafe variable to include or exclude the Safe extension. - - Test for sigaction(). - - Check for pager. This was actually accidental since perldoc.PL - mentions $pager and metaconfig has a unit to check for the - user's pager. In retrospect, I decided the Configure check - didn't do any harm and some extension writers might decide to - use it. - - Always put man1dir under $prefix unless a command line - override is used. - - Allow command-line overrides of $man1ext and $man3ext. - - - Allow man1dir and man3dir names like .../man.1 instead of - just .../man1. - - Lots of rearrangements of various pieces of Configure. - This might be because I ran metaconfig on a different - architecture. - - libc searching now honors $libpth. Previously, it (almost) - always looked in /usr/lib before checking /lib. - - Only prompt user if voidflags is not 15. If voidflags is 15, then - we presume all is well. - - -Prereq: 3.0.1.8 -*** perl5.002b1g/Configure Fri Dec 8 11:23:56 1995 ---- perl5.002b1h/Configure Thu Jan 4 11:14:37 1996 - -Index: INSTALL - - Document how to skip various extensions. - - Indicate that site_perl is typically under (not beside) - /usr/local/lib/perl5. - - Mention how to avoid nm extraction. - - -*** perl5.002b1g/INSTALL Tue Nov 21 22:54:28 1995 ---- perl5.002b1h/INSTALL Thu Jan 4 11:06:28 1996 - -Index: MANIFEST - - Rearrange files some. Try to move .PL utilities to a separate - utils/ subdirectory. - - Merge c2ph.PL and c2ph.doc. - - Add the Safe extension. - -*** perl5.002b1g/MANIFEST Fri Jan 5 11:41:50 1996 ---- perl5.002b1h/MANIFEST Wed Jan 3 14:37:54 1996 - -Index: Makefile.SH - - Now builds .PL utilities in the utils/ subdirectory. - -*** perl5.002b1g/Makefile.SH Fri Dec 8 10:36:33 1995 ---- perl5.002b1h/Makefile.SH Wed Jan 3 14:28:30 1996 - -Index: README.vms - - Updated. - -*** perl5.002b1g/README.vms Wed Nov 15 14:23:10 1995 ---- perl5.002b1h/README.vms Tue Jan 2 16:33:02 1996 - -Index: XSUB.h - - Updated to match xsubpp-1.929. - -*** perl5.002b1g/XSUB.h Wed Dec 6 13:25:26 1995 ---- perl5.002b1h/XSUB.h Tue Jan 2 11:57:57 1996 - -Index: config_h.SH - - Check for HAS_SIGACCTION - - Add STARTPERL define for C code (specifically, a2p). - -Prereq: 3.0.1.4 -*** perl5.002b1g/config_h.SH Fri Dec 8 11:23:56 1995 ---- perl5.002b1h/config_h.SH Thu Jan 4 11:14:37 1996 - -Index: doio.c - - VMS changes for kill. - -*** perl5.002b1g/doio.c Wed Nov 15 14:36:12 1995 ---- perl5.002b1h/doio.c Tue Jan 2 16:27:07 1996 - -Index: embed.h - - Auto-generated from global.sym and interp.sym. - -*** perl5.002b1g/embed.h Wed Nov 15 14:48:47 1995 ---- perl5.002b1h/embed.h Thu Jan 4 13:28:08 1996 - -Index: ext/DynaLoader/DynaLoader.pm - - VMS-specific updates. - -*** perl5.002b1g/ext/DynaLoader/DynaLoader.pm Fri Nov 10 11:49:00 1995 ---- perl5.002b1h/ext/DynaLoader/DynaLoader.pm Tue Jan 2 16:28:02 1996 - -Index: ext/DynaLoader/dl_vms.xs - - Updated to Oct 31, 1995 version. - -*** perl5.002b1g/ext/DynaLoader/dl_vms.xs Tue Oct 31 11:06:06 1995 ---- perl5.002b1h/ext/DynaLoader/dl_vms.xs Tue Jan 2 16:27:32 1996 - -Index: global.sym - - Added maxo and save_pptr items. - -*** perl5.002b1g/global.sym Wed Nov 15 14:58:14 1995 ---- perl5.002b1h/global.sym Wed Jan 3 12:01:59 1996 - -Index: hints/README.hints - - List of tested systems updated a little. - -*** perl5.002b1g/hints/README.hints Fri May 5 14:12:06 1995 ---- perl5.002b1h/hints/README.hints Tue Dec 12 20:03:36 1995 - -Index: hints/irix_5.sh - - Note SGI stdio/malloc related problem. - -*** perl5.002b1g/hints/irix_5.sh Fri May 5 14:07:52 1995 ---- perl5.002b1h/hints/irix_5.sh Tue Jan 2 14:53:52 1996 - -Index: hints/irix_6.sh - - Address change. - - Note SGI stdio/malloc related problem. - -*** perl5.002b1g/hints/irix_6.sh Fri May 5 14:08:41 1995 ---- perl5.002b1h/hints/irix_6.sh Tue Jan 2 14:54:04 1996 - -Index: hints/irix_6_2.sh - - Address change. - -*** perl5.002b1g/hints/irix_6_2.sh Mon Nov 20 11:16:55 1995 ---- perl5.002b1h/hints/irix_6_2.sh Tue Jan 2 14:49:45 1996 - -Index: hints/os2.sh - - Updated. - -*** perl5.002b1g/hints/os2.sh Tue Nov 14 11:07:33 1995 ---- perl5.002b1h/hints/os2.sh Tue Dec 26 17:51:16 1995 - -Index: installman - - Use fork if available. - -*** perl5.002b1g/installman Fri Jan 5 11:41:52 1996 ---- perl5.002b1h/installman Thu Dec 28 16:06:11 1995 - -Index: installperl - - Use new location of utility scripts. - - Eliminate double '//' and extra "". - -*** perl5.002b1g/installperl Mon Nov 20 12:55:03 1995 ---- perl5.002b1h/installperl Wed Jan 3 14:33:57 1996 - -Index: lib/AutoLoader.pm - - Avoid tainting problems. - -*** perl5.002b1g/lib/AutoLoader.pm Wed Nov 15 15:04:59 1995 ---- perl5.002b1h/lib/AutoLoader.pm Tue Jan 2 16:10:36 1996 - -Index: lib/Carp.pm - - Honor trailing \n in messages, as is done for warn(). - -*** perl5.002b1g/lib/Carp.pm Thu May 25 11:16:07 1995 ---- perl5.002b1h/lib/Carp.pm Tue Jan 2 12:10:38 1996 - -Index: lib/Cwd.pm - - VMS patches. - -*** perl5.002b1g/lib/Cwd.pm Fri Jan 5 11:41:52 1996 ---- perl5.002b1h/lib/Cwd.pm Tue Jan 2 16:28:57 1996 - -Index: lib/Exporter.pm - - Include Tim Bunce's enhanced Exporter. I also tried to - resolve the two copies of documentation that I had. - -*** perl5.002b1g/lib/Exporter.pm Fri Jan 5 11:41:52 1996 ---- perl5.002b1h/lib/Exporter.pm Thu Jan 4 14:02:08 1996 - -Index: lib/ExtUtils/MM_VMS.pm - - New file. Incorporates VMS-specific items into MakeMaker. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/lib/ExtUtils/MM_VMS.pm Tue Jan 2 14:07:10 1996 - -Index: lib/ExtUtils/MakeMaker.pm -Prereq: 1.116 - - Updated from 5.12 to 5.16. - -*** perl5.002b1g/lib/ExtUtils/MakeMaker.pm Fri Jan 5 11:41:53 1996 ---- perl5.002b1h/lib/ExtUtils/MakeMaker.pm Tue Jan 2 14:07:10 1996 - -Index: lib/ExtUtils/Manifest.pm - - Updated from MakeMaker 5.12 to 5.16. - -*** perl5.002b1g/lib/ExtUtils/Manifest.pm Fri Jan 5 11:41:54 1996 ---- perl5.002b1h/lib/ExtUtils/Manifest.pm Tue Jan 2 14:07:10 1996 - -Index: lib/ExtUtils/Mkbootstrap.pm - - Updated from MakeMaker 5.12 to 5.16. - -*** perl5.002b1g/lib/ExtUtils/Mkbootstrap.pm Fri Jan 5 11:41:54 1996 ---- perl5.002b1h/lib/ExtUtils/Mkbootstrap.pm Tue Jan 2 14:07:10 1996 - -Index: lib/ExtUtils/xsubpp - - Updated from xsubpp-1.924 to 1.929. - -*** perl5.002b1g/lib/ExtUtils/xsubpp Sun Nov 26 16:04:50 1995 ---- perl5.002b1h/lib/ExtUtils/xsubpp Tue Jan 2 16:29:59 1996 - -Index: lib/File/Path.pm - - VMS-specific changes. - -*** perl5.002b1g/lib/File/Path.pm Wed Nov 15 15:20:31 1995 ---- perl5.002b1h/lib/File/Path.pm Tue Jan 2 16:30:21 1996 - -Index: lib/Pod/Text.pm - - New file. This was created by Dov (???) and enhanced - by Kenneth Albanowski, but all based on Tom C.'s pod2text. - Unfortunately, they used a version of pod2text earlier than - the one in patch.2b1g. I've tried to straighten this all out. - - Equally unfortunately, we've all left Tom as the AUTHOR, even - though we can't hold him responsible for errors he didn't - introduce. Oh well. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/lib/Pod/Text.pm Thu Jan 4 14:16:50 1996 - -Index: lib/Sys/Hostname.pm - - VMS-specific changes. - -*** perl5.002b1g/lib/Sys/Hostname.pm Fri Jan 5 11:41:55 1996 ---- perl5.002b1h/lib/Sys/Hostname.pm Tue Jan 2 16:30:49 1996 - -Index: lib/diagnostics.pm - - A patch from Tim Bunce (?) - -*** perl5.002b1g/lib/diagnostics.pm Wed Dec 6 13:58:42 1995 ---- perl5.002b1h/lib/diagnostics.pm Tue Jan 2 12:10:37 1996 - -Index: lib/perl5db.pl - - VMS-specific changes. - -*** perl5.002b1g/lib/perl5db.pl Wed Nov 15 22:37:45 1995 ---- perl5.002b1h/lib/perl5db.pl Tue Jan 2 16:30:33 1996 - -Index: lib/splain - - Fix some old typos. - -*** perl5.002b1g/lib/splain Tue Nov 14 16:16:36 1995 ---- perl5.002b1h/lib/splain Tue Jan 2 12:10:37 1996 - -Index: makeaperl.SH - - Use the 'new' startperl variable. - -*** perl5.002b1g/makeaperl.SH Thu Jun 1 11:20:52 1995 ---- perl5.002b1h/makeaperl.SH Tue Jan 2 12:11:28 1996 - -Index: mg.c - - Set up a reliable signal handler, courtesy of Kenneth Albanowski. - This needs to be documented still. The idea is that even on - System V systems, you won't have to reset the signal handler as - the first action inside your signal handler. - -*** perl5.002b1g/mg.c Wed Nov 15 15:44:10 1995 ---- perl5.002b1h/mg.c Thu Jan 4 13:49:12 1996 - -Index: minimod.pl - - Give a proper NAME description. - -*** perl5.002b1g/minimod.pl Sun Nov 26 16:19:55 1995 ---- perl5.002b1h/minimod.pl Tue Jan 2 14:30:24 1996 - -Index: miniperlmain.c - - Better locale handling, courtesy of jhi. - - Include a proper cast of NULL for non-prototyping compilers. - -*** perl5.002b1g/miniperlmain.c Sat Nov 18 15:48:10 1995 ---- perl5.002b1h/miniperlmain.c Thu Jan 4 12:03:37 1996 - -Index: op.c - - Turn on USE_OP_MASK by default for the Safe extension. I'll be - interested in benchmark results with this on and off. - -*** perl5.002b1g/op.c Wed Nov 15 22:10:36 1995 ---- perl5.002b1h/op.c Wed Jan 3 14:17:01 1996 - -Index: os2/Makefile.SHs - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/Makefile.SHs Sun Dec 24 13:55:22 1995 - -Index: os2/README - - Updated. - -*** perl5.002b1g/os2/README Tue Nov 14 14:42:13 1995 ---- perl5.002b1h/os2/README Tue Dec 26 18:31:32 1995 - -Index: os2/diff.MANIFEST - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/diff.MANIFEST Tue Dec 26 19:54:12 1995 - -Index: os2/diff.Makefile - - Updated - -*** perl5.002b1g/os2/diff.Makefile Tue Nov 14 11:09:29 1995 ---- perl5.002b1h/os2/diff.Makefile Fri Dec 8 00:09:56 1995 - -Index: os2/diff.c2ph - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/diff.c2ph Thu Dec 7 15:25:52 1995 - -Index: os2/diff.configure - - Updated. - -*** perl5.002b1g/os2/diff.configure Sun Nov 12 01:31:34 1995 ---- perl5.002b1h/os2/diff.configure Tue Dec 26 19:57:08 1995 - -Index: os2/diff.db_file - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/diff.db_file Tue Dec 19 02:14:54 1995 - -Index: os2/diff.init - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/diff.init Sun Nov 26 15:05:48 1995 - -Index: os2/diff.installman - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/diff.installman Wed Nov 22 03:50:26 1995 - -Index: os2/diff.installperl - - Updated. - -*** perl5.002b1g/os2/diff.installperl Tue Nov 14 11:09:28 1995 ---- perl5.002b1h/os2/diff.installperl Wed Nov 22 02:59:58 1995 - -Index: os2/diff.mkdep - - Updated. - -*** perl5.002b1g/os2/diff.mkdep Tue Nov 14 11:09:28 1995 ---- perl5.002b1h/os2/diff.mkdep Sun Nov 26 15:00:24 1995 - -Index: os2/diff.rest - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/diff.rest Thu Dec 7 16:03:26 1995 - -Index: os2/diff.x2pMakefile - - Updated. - -*** perl5.002b1g/os2/diff.x2pMakefile Tue Nov 14 11:09:29 1995 ---- perl5.002b1h/os2/diff.x2pMakefile Wed Nov 22 21:55:42 1995 - -Index: os2/notes - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/notes Tue Dec 26 19:55:30 1995 - -Index: os2/os2.c - - Updated. - -*** perl5.002b1g/os2/os2.c Tue Nov 14 11:07:33 1995 ---- perl5.002b1h/os2/os2.c Sun Dec 24 13:43:02 1995 - -Index: os2/os2ish.h - - Updated. - -*** perl5.002b1g/os2/os2ish.h Tue Nov 14 11:07:33 1995 ---- perl5.002b1h/os2/os2ish.h Mon Dec 18 16:17:38 1995 - -Index: os2/perl2cmd.pl - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/perl2cmd.pl Tue Dec 19 11:20:42 1995 - -Index: perl.c - - Updated to say beta1h. - - Move VMS env code. - -*** perl5.002b1g/perl.c Fri Jan 5 11:41:56 1996 ---- perl5.002b1h/perl.c Thu Jan 4 15:13:53 1996 - -Index: perl.h - - 5.002beta1 attempted some memory optimizations, but unfortunately - they can result in a memory leak problem. This can be - avoided by #define STRANGE_MALLOC. I do that here until - consensus is reached on a better strategy for handling the - memory optimizations. - - Include maxo for the maximum number of operations (needed - for the Safe extension). - -*** perl5.002b1g/perl.h Wed Nov 15 17:13:16 1995 ---- perl5.002b1h/perl.h Wed Jan 3 12:21:55 1996 - -Index: pod/Makefile - - Include -I../lib so that pod2* can find the appropriate libraries. - - The pod names are once again sorted. - - The PERL line is wrong. It should read - PERL = ../miniperl - This file is automatically generated, but I happened to do it on - a system without miniperl avaialable, so my script fell back on - the perl default. - -*** perl5.002b1g/pod/Makefile Fri Jan 5 11:41:56 1996 ---- perl5.002b1h/pod/Makefile Wed Jan 3 15:06:41 1996 - -Index: pod/perlmod.pod - - Mention the Safe extension. - -*** perl5.002b1g/pod/perlmod.pod Fri Jan 5 11:41:59 1996 ---- perl5.002b1h/pod/perlmod.pod Thu Jan 4 13:52:14 1996 - -Index: pod/perltoc.pod - - Rebuilt using pod/buildtoc and fmt. - -*** perl5.002b1g/pod/perltoc.pod Fri Jan 5 11:42:00 1996 ---- perl5.002b1h/pod/perltoc.pod Thu Jan 4 14:04:20 1996 - -Index: pod/pod2text.PL -*** perl5.002b1g/pod/pod2text.PL Fri Jan 5 11:42:01 1996 ---- perl5.002b1h/pod/pod2text.PL Tue Jan 2 14:28:24 1996 - -Index: pp_sys.c - - VMS changes ? - -*** perl5.002b1g/pp_sys.c Wed Nov 15 21:51:33 1995 ---- perl5.002b1h/pp_sys.c Tue Jan 2 16:32:50 1996 - -Index: t/lib/safe.t - - New test. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/t/lib/safe.t Tue Jan 2 15:43:53 1996 - -Index: utils/Makefile - - New file to build the utilities. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/utils/Makefile Wed Jan 3 14:06:18 1996 - -Index: utils/c2ph.PL - - Ungracefully merge the old c2ph.doc in as an embedded pod. - - Delete lots of trailing spaces and tabs that have crept in. - -Prereq: 1.7 -*** perl5.002b1g/utils/c2ph.PL Mon Nov 20 12:36:17 1995 ---- perl5.002b1h/utils/c2ph.PL Wed Jan 3 14:05:41 1996 - -Index: utils/h2ph.PL - - Add patch for AIX files which sometimes have #include<foo.h>, - i.e., no spaces after the word 'include'. - -*** perl5.002b1g/utils/h2ph.PL Mon Nov 27 10:14:50 1995 ---- perl5.002b1h/utils/h2ph.PL Tue Jan 2 16:13:31 1996 - -Index: utils/h2xs.PL - - Add version stuff. - - The old version didn't have a number. This one's called 1.12. - -*** perl5.002b1g/utils/h2xs.PL Sun Nov 19 22:37:58 1995 ---- perl5.002b1h/utils/h2xs.PL Tue Jan 2 13:50:55 1996 - -Index: utils/perlbug.PL - - New utility. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/utils/perlbug.PL Sat Nov 18 16:15:13 1995 - -Index: utils/perldoc.PL - - Better error handling. - - Updated to use Pod::Text, if available. - - More VMS friendly. - - New -u option . - -*** perl5.002b1g/utils/perldoc.PL Tue Nov 14 14:57:57 1995 ---- perl5.002b1h/utils/perldoc.PL Tue Jan 2 14:28:08 1996 - -Index: utils/pl2pm.PL - - Changed into a .PL extract file for proper setting of - $startperl. - - Add _minimal_ pod documentation. - -*** perl5.002b1g/utils/pl2pm.PL Mon Jan 16 23:45:07 1995 ---- perl5.002b1h/utils/pl2pm.PL Wed Jan 3 14:14:57 1996 - -Index: vms/Makefile - - Updated for VMS. - -*** perl5.002b1g/vms/Makefile Wed Nov 15 22:05:15 1995 ---- perl5.002b1h/vms/Makefile Tue Jan 2 16:33:53 1996 - -Index: vms/config.vms - - Updated for VMS. - -*** perl5.002b1g/vms/config.vms Wed Nov 15 22:05:26 1995 ---- perl5.002b1h/vms/config.vms Tue Jan 2 16:33:09 1996 - -Index: vms/descrip.mms - - Updated for VMS. - -*** perl5.002b1g/vms/descrip.mms Wed Nov 15 22:05:38 1995 ---- perl5.002b1h/vms/descrip.mms Tue Jan 2 16:33:18 1996 - -Index: vms/ext/Filespec.pm - - Updated for VMS. - -*** perl5.002b1g/vms/ext/Filespec.pm Sun Mar 12 03:14:26 1995 ---- perl5.002b1h/vms/ext/Filespec.pm Tue Jan 2 16:33:25 1996 - -Index: vms/ext/MM_VMS.pm - - Updated for VMS. This might be obsolete now that we have - lib/ExtUtils/MM_VMS.pm. - -*** perl5.002b1g/vms/ext/MM_VMS.pm Wed Nov 15 22:05:48 1995 ---- perl5.002b1h/vms/ext/MM_VMS.pm Tue Jan 2 16:33:32 1996 - -Index: vms/gen_shrfls.pl - - Updated for VMS. - -*** perl5.002b1g/vms/gen_shrfls.pl Wed Nov 15 22:06:27 1995 ---- perl5.002b1h/vms/gen_shrfls.pl Tue Jan 2 16:33:47 1996 - -Index: vms/genconfig.pl - - Updated for VMS. - -*** perl5.002b1g/vms/genconfig.pl Sun Mar 12 03:14:36 1995 ---- perl5.002b1h/vms/genconfig.pl Tue Jan 2 16:33:39 1996 - -Index: vms/perlvms.pod - - Updated for VMS. - -*** perl5.002b1g/vms/perlvms.pod Wed Nov 15 22:06:32 1995 ---- perl5.002b1h/vms/perlvms.pod Tue Jan 2 16:33:59 1996 - -Index: vms/test.com - - Updated for VMS. - -*** perl5.002b1g/vms/test.com Wed Nov 15 22:06:59 1995 ---- perl5.002b1h/vms/test.com Tue Jan 2 16:34:07 1996 - -Index: vms/vms.c - - Updated for VMS. - -Prereq: 2.2 -*** perl5.002b1g/vms/vms.c Wed Nov 15 22:07:10 1995 ---- perl5.002b1h/vms/vms.c Tue Jan 2 16:34:13 1996 - -Index: vms/vmsish.h - - Updated for VMS. - -*** perl5.002b1g/vms/vmsish.h Wed Nov 15 22:07:24 1995 ---- perl5.002b1h/vms/vmsish.h Tue Jan 2 16:34:20 1996 - -Index: vms/writemain.pl - - Updated for VMS. - -*** perl5.002b1g/vms/writemain.pl Mon Mar 6 20:00:18 1995 ---- perl5.002b1h/vms/writemain.pl Tue Jan 2 16:34:26 1996 - -Index: x2p/a2py.c - - Use new config_h.SH STARTPERL #define. - -*** perl5.002b1g/x2p/a2py.c Tue Mar 7 11:53:10 1995 ---- perl5.002b1h/x2p/a2py.c Tue Jan 2 12:11:28 1996 - -Index: x2p/find2perl.PL - - Add missing "" around $Config{startperl}. - -*** perl5.002b1g/x2p/find2perl.PL Sun Nov 19 23:11:58 1995 ---- perl5.002b1h/x2p/find2perl.PL Tue Jan 2 12:11:27 1996 - -Index: x2p/s2p.PL - - Add missing "" around $Config{startperl}. - -*** perl5.002b1g/x2p/s2p.PL Sun Nov 19 23:14:59 1995 ---- perl5.002b1h/x2p/s2p.PL Tue Jan 2 12:11:27 1996 - - -------------- -Version 5.002b1g -------------- - -This is patch.2b1g to perl5.002beta1. - -This patch is just my packaging of Tom's documentation patches -he released as patch.2b1g. - -Index: MANIFEST -*** perl5.002b1f/MANIFEST Fri Dec 8 13:34:53 1995 ---- perl5.002b1g/MANIFEST Thu Dec 21 13:00:58 1995 - -Index: ext/DB_File/DB_File.pm -*** perl5.002b1f/ext/DB_File/DB_File.pm Tue Nov 14 14:14:25 1995 ---- perl5.002b1g/ext/DB_File/DB_File.pm Thu Dec 21 13:00:58 1995 - -Index: ext/POSIX/POSIX.pm -*** perl5.002b1f/ext/POSIX/POSIX.pm Fri Dec 8 10:23:54 1995 ---- perl5.002b1g/ext/POSIX/POSIX.pm Thu Dec 21 13:00:58 1995 - -Index: ext/POSIX/POSIX.pod -*** perl5.002b1f/ext/POSIX/POSIX.pod Fri Dec 8 10:30:40 1995 ---- perl5.002b1g/ext/POSIX/POSIX.pod Thu Dec 21 13:00:59 1995 - -Index: ext/Safe/Makefile.PL -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/ext/Safe/Makefile.PL Thu Dec 21 13:01:00 1995 - -Index: ext/Safe/Safe.pm -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/ext/Safe/Safe.pm Thu Dec 21 13:01:00 1995 - -Index: ext/Safe/Safe.xs -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/ext/Safe/Safe.xs Thu Dec 21 13:01:00 1995 - -Index: ext/Socket/Socket.pm -*** perl5.002b1f/ext/Socket/Socket.pm Wed Dec 6 13:58:41 1995 ---- perl5.002b1g/ext/Socket/Socket.pm Thu Dec 21 13:01:00 1995 - -Index: installman -*** perl5.002b1f/installman Mon Nov 6 11:16:43 1995 ---- perl5.002b1g/installman Thu Dec 21 13:01:00 1995 - -Index: lib/AutoSplit.pm -*** perl5.002b1f/lib/AutoSplit.pm Wed Nov 15 15:06:19 1995 ---- perl5.002b1g/lib/AutoSplit.pm Thu Dec 21 13:01:01 1995 - -Index: lib/Cwd.pm -*** perl5.002b1f/lib/Cwd.pm Fri Dec 8 10:42:46 1995 ---- perl5.002b1g/lib/Cwd.pm Thu Dec 21 13:01:01 1995 - -Index: lib/Devel/SelfStubber.pm -*** perl5.002b1f/lib/Devel/SelfStubber.pm Sun Nov 26 16:59:51 1995 ---- perl5.002b1g/lib/Devel/SelfStubber.pm Thu Dec 21 13:01:01 1995 - -Index: lib/Env.pm -*** perl5.002b1f/lib/Env.pm Tue Oct 18 12:34:43 1994 ---- perl5.002b1g/lib/Env.pm Thu Dec 21 13:01:01 1995 - -Index: lib/Exporter.pm -*** perl5.002b1f/lib/Exporter.pm Wed Nov 15 15:19:33 1995 ---- perl5.002b1g/lib/Exporter.pm Thu Dec 21 13:01:01 1995 - -Index: lib/ExtUtils/Liblist.pm -*** perl5.002b1f/lib/ExtUtils/Liblist.pm Tue Dec 5 07:56:53 1995 ---- perl5.002b1g/lib/ExtUtils/Liblist.pm Thu Dec 21 13:01:01 1995 - -Index: lib/ExtUtils/MakeMaker.pm -Prereq: 1.115 -*** perl5.002b1f/lib/ExtUtils/MakeMaker.pm Tue Dec 5 13:20:56 1995 ---- perl5.002b1g/lib/ExtUtils/MakeMaker.pm Thu Dec 21 13:01:02 1995 - -Index: lib/ExtUtils/Manifest.pm -*** perl5.002b1f/lib/ExtUtils/Manifest.pm Tue Dec 5 13:21:00 1995 ---- perl5.002b1g/lib/ExtUtils/Manifest.pm Thu Dec 21 13:01:02 1995 - -Index: lib/ExtUtils/Mkbootstrap.pm -*** perl5.002b1f/lib/ExtUtils/Mkbootstrap.pm Thu Oct 19 05:58:34 1995 ---- perl5.002b1g/lib/ExtUtils/Mkbootstrap.pm Thu Dec 21 13:01:02 1995 - -Index: lib/FileHandle.pm -*** perl5.002b1f/lib/FileHandle.pm Thu May 25 11:18:20 1995 ---- perl5.002b1g/lib/FileHandle.pm Thu Dec 21 13:01:02 1995 - -Index: lib/IPC/Open2.pm -*** perl5.002b1f/lib/IPC/Open2.pm Thu May 25 11:31:07 1995 ---- perl5.002b1g/lib/IPC/Open2.pm Thu Dec 21 13:01:03 1995 - -Index: lib/IPC/Open3.pm -Prereq: 1.1 -*** perl5.002b1f/lib/IPC/Open3.pm Wed Nov 15 15:21:11 1995 ---- perl5.002b1g/lib/IPC/Open3.pm Thu Dec 21 13:01:03 1995 - -Index: lib/SelfLoader.pm -*** perl5.002b1f/lib/SelfLoader.pm Sun Nov 26 16:59:51 1995 ---- perl5.002b1g/lib/SelfLoader.pm Thu Dec 21 13:01:03 1995 - -Index: lib/Sys/Hostname.pm -*** perl5.002b1f/lib/Sys/Hostname.pm Tue Oct 18 12:38:25 1994 ---- perl5.002b1g/lib/Sys/Hostname.pm Thu Dec 21 13:01:03 1995 - -Index: lib/Sys/Syslog.pm -*** perl5.002b1f/lib/Sys/Syslog.pm Wed Dec 6 14:07:54 1995 ---- perl5.002b1g/lib/Sys/Syslog.pm Thu Dec 21 13:01:04 1995 - -Index: lib/Term/Cap.pm -*** perl5.002b1f/lib/Term/Cap.pm Sun Mar 12 00:14:42 1995 ---- perl5.002b1g/lib/Term/Cap.pm Thu Dec 21 13:01:04 1995 - -Index: lib/Term/Complete.pm -*** perl5.002b1f/lib/Term/Complete.pm Wed May 24 12:09:48 1995 ---- perl5.002b1g/lib/Term/Complete.pm Thu Dec 21 13:01:04 1995 - -Index: lib/Test/Harness.pm -*** perl5.002b1f/lib/Test/Harness.pm Mon Nov 13 23:01:40 1995 ---- perl5.002b1g/lib/Test/Harness.pm Thu Dec 21 13:01:04 1995 - -Index: lib/Text/Soundex.pm -Prereq: 1.2 -*** perl5.002b1f/lib/Text/Soundex.pm Tue Oct 18 12:38:42 1994 ---- perl5.002b1g/lib/Text/Soundex.pm Thu Dec 21 13:01:04 1995 - -Index: lib/Text/Tabs.pm -*** perl5.002b1f/lib/Text/Tabs.pm Sat Nov 18 16:08:55 1995 ---- perl5.002b1g/lib/Text/Tabs.pm Thu Dec 21 13:01:04 1995 - -Index: lib/Text/Wrap.pm -*** perl5.002b1f/lib/Text/Wrap.pm Sat Nov 18 16:08:56 1995 ---- perl5.002b1g/lib/Text/Wrap.pm Thu Dec 21 13:01:05 1995 - -Index: lib/TieHash.pm -*** perl5.002b1f/lib/TieHash.pm Wed Nov 15 15:27:47 1995 ---- perl5.002b1g/lib/TieHash.pm Thu Dec 21 13:01:05 1995 - -Index: lib/Time/Local.pm -*** perl5.002b1f/lib/Time/Local.pm Tue Oct 18 12:38:47 1994 ---- perl5.002b1g/lib/Time/Local.pm Thu Dec 21 13:01:05 1995 - -Index: lib/less.pm -*** perl5.002b1f/lib/less.pm Thu May 25 11:19:59 1995 ---- perl5.002b1g/lib/less.pm Thu Dec 21 13:01:05 1995 - -Index: lib/overload.pm -*** perl5.002b1f/lib/overload.pm Sat Nov 18 16:03:33 1995 ---- perl5.002b1g/lib/overload.pm Thu Dec 21 13:01:05 1995 - -Index: lib/strict.pm -*** perl5.002b1f/lib/strict.pm Thu May 25 11:20:27 1995 ---- perl5.002b1g/lib/strict.pm Thu Dec 21 13:01:05 1995 - -Index: lib/syslog.pl -*** perl5.002b1f/lib/syslog.pl Tue Oct 18 12:37:13 1994 ---- perl5.002b1g/lib/syslog.pl Thu Dec 21 13:01:05 1995 - -Index: perl.c -*** perl5.002b1f/perl.c Sun Nov 19 16:11:29 1995 ---- perl5.002b1g/perl.c Thu Dec 21 13:01:06 1995 - -Index: pod/Makefile -*** perl5.002b1f/pod/Makefile Mon Nov 20 13:00:50 1995 ---- perl5.002b1g/pod/Makefile Thu Dec 21 13:01:06 1995 - -Index: pod/PerlDoc/Functions.pm -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/pod/PerlDoc/Functions.pm Thu Dec 21 13:01:07 1995 - -Index: pod/PerlDoc/Functions.pm.POSIX -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/pod/PerlDoc/Functions.pm.POSIX Thu Dec 21 13:01:07 1995 - -Index: pod/buildtoc -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/pod/buildtoc Thu Dec 21 13:01:07 1995 - -Index: pod/perl.pod -*** perl5.002b1f/pod/perl.pod Sat Nov 18 17:23:58 1995 ---- perl5.002b1g/pod/perl.pod Thu Dec 21 13:01:07 1995 - -Index: pod/perlbot.pod -*** perl5.002b1f/pod/perlbot.pod Fri Nov 10 17:27:33 1995 ---- perl5.002b1g/pod/perlbot.pod Thu Dec 21 13:01:07 1995 - -Index: pod/perldata.pod -*** perl5.002b1f/pod/perldata.pod Sat Nov 18 17:23:59 1995 ---- perl5.002b1g/pod/perldata.pod Thu Dec 21 13:01:07 1995 - -Index: pod/perldiag.pod -*** perl5.002b1f/pod/perldiag.pod Sun Nov 19 22:10:58 1995 ---- perl5.002b1g/pod/perldiag.pod Thu Dec 21 13:01:08 1995 - -Index: pod/perldsc.pod -*** perl5.002b1f/pod/perldsc.pod Sat Nov 18 17:24:22 1995 ---- perl5.002b1g/pod/perldsc.pod Thu Dec 21 13:01:08 1995 - -Index: pod/perlembed.pod -*** perl5.002b1f/pod/perlembed.pod Tue Oct 18 12:39:24 1994 ---- perl5.002b1g/pod/perlembed.pod Thu Dec 21 13:01:09 1995 - -Index: pod/perlform.pod -*** perl5.002b1f/pod/perlform.pod Sat Nov 18 17:23:59 1995 ---- perl5.002b1g/pod/perlform.pod Thu Dec 21 13:01:09 1995 - -Index: pod/perlfunc.pod -*** perl5.002b1f/pod/perlfunc.pod Sat Nov 18 17:24:01 1995 ---- perl5.002b1g/pod/perlfunc.pod Thu Dec 21 13:01:09 1995 - -Index: pod/perlguts.pod -*** perl5.002b1f/pod/perlguts.pod Tue Oct 31 15:38:18 1995 ---- perl5.002b1g/pod/perlguts.pod Thu Dec 21 13:01:10 1995 - -Index: pod/perlipc.pod -*** perl5.002b1f/pod/perlipc.pod Sat Nov 18 17:24:02 1995 ---- perl5.002b1g/pod/perlipc.pod Thu Dec 21 13:01:11 1995 - -Index: pod/perllol.pod -*** perl5.002b1f/pod/perllol.pod Sat Nov 18 17:24:22 1995 ---- perl5.002b1g/pod/perllol.pod Thu Dec 21 13:01:11 1995 - -Index: pod/perlmod.pod -*** perl5.002b1f/pod/perlmod.pod Sat Nov 18 17:24:03 1995 ---- perl5.002b1g/pod/perlmod.pod Thu Dec 21 13:01:11 1995 - -Index: pod/perlobj.pod -*** perl5.002b1f/pod/perlobj.pod Sun Mar 12 00:48:38 1995 ---- perl5.002b1g/pod/perlobj.pod Thu Dec 21 13:01:11 1995 - -Index: pod/perlop.pod -*** perl5.002b1f/pod/perlop.pod Sat Nov 18 17:24:03 1995 ---- perl5.002b1g/pod/perlop.pod Thu Dec 21 13:01:12 1995 - -Index: pod/perlovl.pod -*** perl5.002b1f/pod/perlovl.pod Mon Jan 23 13:25:35 1995 ---- perl5.002b1g/pod/perlovl.pod Thu Dec 21 13:01:12 1995 - -Index: pod/perlpod.pod -*** perl5.002b1f/pod/perlpod.pod Sun Nov 19 22:22:59 1995 ---- perl5.002b1g/pod/perlpod.pod Thu Dec 21 13:01:12 1995 - -Index: pod/perlre.pod -*** perl5.002b1f/pod/perlre.pod Sun Nov 26 16:57:20 1995 ---- perl5.002b1g/pod/perlre.pod Thu Dec 21 13:01:12 1995 - -Index: pod/perlref.pod -*** perl5.002b1f/pod/perlref.pod Sat Nov 18 17:24:04 1995 ---- perl5.002b1g/pod/perlref.pod Thu Dec 21 13:01:12 1995 - -Index: pod/perlrun.pod -*** perl5.002b1f/pod/perlrun.pod Wed Feb 22 18:32:59 1995 ---- perl5.002b1g/pod/perlrun.pod Thu Dec 21 13:01:12 1995 - -Index: pod/perlsec.pod -*** perl5.002b1f/pod/perlsec.pod Wed Feb 22 18:33:02 1995 ---- perl5.002b1g/pod/perlsec.pod Thu Dec 21 13:01:12 1995 - -Index: pod/perlstyle.pod -*** perl5.002b1f/pod/perlstyle.pod Tue Oct 18 12:40:13 1994 ---- perl5.002b1g/pod/perlstyle.pod Thu Dec 21 13:01:13 1995 - -Index: pod/perlsub.pod -*** perl5.002b1f/pod/perlsub.pod Sun Mar 12 22:42:58 1995 ---- perl5.002b1g/pod/perlsub.pod Thu Dec 21 13:01:13 1995 - -Index: pod/perlsyn.pod -*** perl5.002b1f/pod/perlsyn.pod Sat Nov 18 17:24:04 1995 ---- perl5.002b1g/pod/perlsyn.pod Thu Dec 21 13:01:14 1995 - -Index: pod/perltie.pod -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/pod/perltie.pod Thu Dec 21 13:01:14 1995 - -Index: pod/perltoc.pod -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/pod/perltoc.pod Thu Dec 21 13:01:14 1995 - -Index: pod/perltrap.pod -*** perl5.002b1f/pod/perltrap.pod Wed Nov 15 21:36:11 1995 ---- perl5.002b1g/pod/perltrap.pod Thu Dec 21 13:01:14 1995 - -Index: pod/perlvar.pod -*** perl5.002b1f/pod/perlvar.pod Wed Nov 15 21:36:59 1995 ---- perl5.002b1g/pod/perlvar.pod Thu Dec 21 13:01:15 1995 - -Index: pod/perlxs.pod -*** perl5.002b1f/pod/perlxs.pod Sun Nov 19 22:12:44 1995 ---- perl5.002b1g/pod/perlxs.pod Thu Dec 21 13:01:15 1995 - -Index: pod/perlxstut.pod -*** perl5.002b1f/pod/perlxstut.pod Mon Nov 20 13:02:12 1995 ---- perl5.002b1g/pod/perlxstut.pod Thu Dec 21 13:01:15 1995 - -Index: pod/pod2man.PL -Prereq: 1.5 -*** perl5.002b1f/pod/pod2man.PL Wed Nov 15 22:32:51 1995 ---- perl5.002b1g/pod/pod2man.PL Thu Dec 21 13:01:15 1995 - -Index: pod/pod2text -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/pod/pod2text Thu Dec 21 13:01:16 1995 - -Index: pod/roffitall -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/pod/roffitall Thu Dec 21 13:01:16 1995 - -Index: pod/splitpod -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/pod/splitpod Thu Dec 21 13:01:16 1995 - -------------- -Version 5.002b1f -------------- - -This is patch.2b1f to perl5.002beta1. - -Index: Changes.Conf - -Include 5.001m -> 5.002beta1 changes. - -*** perl5.002b1e/Changes.Conf Mon Nov 20 10:08:05 1995 ---- perl5.002b1f/Changes.Conf Wed Dec 6 15:29:48 1995 - -Index: Configure - - Include Jeff Okamoto's patch to allow arbitrary specification - of $startperl. - - As requested, I have moved site_perl to be under - $privlib, by default. The default will now be - /usr/local/lib/perl5/site_perl. This is in accord with the way - emacs used to do it :-). - - -Prereq: 3.0.1.8 -*** perl5.002b1e/Configure Fri Dec 8 14:55:26 1995 ---- perl5.002b1f/Configure Fri Dec 8 11:23:56 1995 - -Index: MANIFEST - Add in POSIX.pod. I didn't include Dean's mkposixman tool because - it seemed to confuse MakeMaker, and I didn't want to manually fix - the POSIX/Makefile.PL file today. - - Renamed minimod.PL. The idea is as follows: I'd like to reserve - the .PL suffix for files that are extracted during build time, and - then can be deleted after installation. That is, it will be - analogous to the .SH suffix. For example, h2xs.PL creates - h2xs, and a 'make realclean' will remove the h2xs. Minimod.PL - was an exception to this pattern. Eventually, the .PL dependencies - will be generated automatically, just as the .SH dependencies are - now. - - Add in socket test. - -*** perl5.002b1e/MANIFEST Fri Dec 8 14:55:27 1995 ---- perl5.002b1f/MANIFEST Fri Dec 8 13:34:53 1995 - -Index: Makefile.SH - - Renamed minimod.PL to minimod.pl - -*** perl5.002b1e/Makefile.SH Mon Nov 20 15:56:12 1995 ---- perl5.002b1f/Makefile.SH Fri Dec 8 10:36:33 1995 - -Index: XSUB.h - - Include (SV*) cast in the newXSproto #define. - -*** perl5.002b1e/XSUB.h Fri Dec 8 14:55:14 1995 ---- perl5.002b1f/XSUB.h Wed Dec 6 13:25:26 1995 - -Index: ext/POSIX/POSIX.pm - - I have included Dean's patch and the .pod generated by mkposixman. - -*** perl5.002b1e/ext/POSIX/POSIX.pm Wed Nov 15 14:54:09 1995 ---- perl5.002b1f/ext/POSIX/POSIX.pm Fri Dec 8 10:23:54 1995 - -Index: ext/POSIX/POSIX.pod - - I have included Dean's patch and the .pod generated by mkposixman. - -*** /dev/null Fri Dec 8 13:36:14 1995 ---- perl5.002b1f/ext/POSIX/POSIX.pod Fri Dec 8 10:30:40 1995 - -Index: ext/POSIX/POSIX.xs - - I have included Dean's patch and the .pod generated by mkposixman. - -*** perl5.002b1e/ext/POSIX/POSIX.xs Wed Nov 15 14:56:22 1995 ---- perl5.002b1f/ext/POSIX/POSIX.xs Fri Dec 8 10:23:54 1995 - -Index: ext/Socket/Socket.pm - - Replace errant sockaddr_in by correct sockaddr_un. - Remove an extra ')'. -- from Tom C. - -*** perl5.002b1e/ext/Socket/Socket.pm Fri Dec 8 14:55:28 1995 ---- perl5.002b1f/ext/Socket/Socket.pm Wed Dec 6 13:58:41 1995 - -Index: gv.c - - Fix from Nick Ing-Simmons to get HvNAME(stash) from caller's - package. - -*** perl5.002b1e/gv.c Wed Nov 15 14:58:39 1995 ---- perl5.002b1f/gv.c Fri Dec 8 10:37:22 1995 - -Index: lib/Cwd.pm - - Fix a long-standing problem where insufficient permissions higher - up in the directory tree caused getcwd to fail. This often showed - up on AFS. - -*** perl5.002b1e/lib/Cwd.pm Mon Nov 13 23:01:38 1995 ---- perl5.002b1f/lib/Cwd.pm Fri Dec 8 10:42:46 1995 - -Index: lib/Sys/Syslog.pm - - Modernize Syslog.pm to 'use Socket;' and 'use Sys::Hostname'. - Alas, I've lost the attribution for this patch. Sorry about - that. - -*** perl5.002b1e/lib/Sys/Syslog.pm Thu Feb 9 20:05:36 1995 ---- perl5.002b1f/lib/Sys/Syslog.pm Wed Dec 6 14:07:54 1995 - -Index: lib/diagnostics.pm - - Fixes from Tom. - -*** perl5.002b1e/lib/diagnostics.pm Tue Nov 14 16:16:36 1995 ---- perl5.002b1f/lib/diagnostics.pm Wed Dec 6 13:58:42 1995 - -Index: t/lib/socket.t - - New test from Tom. I've allowed it to fail if the echo service is - disabled, as is apparently the case on some systems. - -*** /dev/null Fri Dec 8 13:36:14 1995 ---- perl5.002b1f/t/lib/socket.t Fri Dec 8 11:16:01 1995 - -Index: toke.c - - A patch from Paul Marquess "purely for source filters". - -*** perl5.002b1e/toke.c Wed Nov 15 22:08:23 1995 ---- perl5.002b1f/toke.c Wed Dec 6 13:24:19 1995 - -------------- -Version 5.002b1e -------------- - -This is patch.2b1e to perl5.002beta1. This is simply -an upgrade from MakeMaker-5.10 to MakeMaker-5.11. - - -Index: lib/ExtUtils/Liblist.pm -*** perl5.002b1d/lib/ExtUtils/Liblist.pm Sat Dec 2 16:50:47 1995 ---- perl5.002b1e/lib/ExtUtils/Liblist.pm Wed Dec 6 11:52:22 1995 - -Index: lib/ExtUtils/MakeMaker.pm -Prereq: 1.114 -*** perl5.002b1d/lib/ExtUtils/MakeMaker.pm Sat Dec 2 16:50:48 1995 ---- perl5.002b1e/lib/ExtUtils/MakeMaker.pm Wed Dec 6 11:52:22 1995 - -Index: lib/ExtUtils/Manifest.pm -*** perl5.002b1d/lib/ExtUtils/Manifest.pm Sat Dec 2 16:50:48 1995 ---- perl5.002b1e/lib/ExtUtils/Manifest.pm Wed Dec 6 11:52:22 1995 - -------------- -Version 5.002b1d -------------- - -This is patch.2b1d to perl5.002beta1. - -This patch includes patches for the following items: - - NETaa14710: Included bsdi_bsdos.sh hint file. - - pod/perlre.pod: Mention 32bit limit. - - Configure Updates. - - Update Socket.xs to version 1.5. This handles - systems that might not have <sys/un.h>. - - Fix missing quotes in h2ph.PL - -These are each described in detail below, after the corresponding -index line. - -Index: Configure - - locincpth should now work as documented in INSTALL - - Improved guessing of man1dir - - Remove spurious semicolon in NONBLOCK testing. - - Send failed './loc' message to fd 4. - - Check for <sys/un.h> - - Allow 'unixisms' to be overridden by hint files. - - Remove -r test from './loc' since some executables are - not readable. - - Remove spurious doublings of -L/usr/local/lib when reusing old - config.sh. - - Improved domain name guessing, from - Hallvard B Furuseth <h.b.furuseth@usit.uio.no> - - Include sitelib (architecture-independent directory). - - -Prereq: 3.0.1.8 -*** perl5.002b1c/Configure Mon Nov 20 10:00:33 1995 ---- perl5.002b1d/Configure Sat Dec 2 15:35:13 1995 - -Index: INSTALL - - Consistently use "sh Configure" in examples. - - Add reminder that interactive use may be helpful. - -*** perl5.002b1c/INSTALL Mon Nov 20 10:46:48 1995 ---- perl5.002b1d/INSTALL Tue Nov 21 22:54:28 1995 - -Index: MANIFEST - - Include renamed hint file. - -*** perl5.002b1c/MANIFEST Sat Dec 2 16:20:21 1995 ---- perl5.002b1d/MANIFEST Sun Nov 26 17:03:31 1995 - -Index: config_h.SH - - Include check for <sys/un.h>. - - Include SITELIB_EXP definition for architecture-independent - site-specific modules. Usually, this will be - /usr/local/lib/site_perl. - -Prereq: 3.0.1.4 -*** perl5.002b1c/config_h.SH Mon Nov 20 10:00:33 1995 ---- perl5.002b1d/config_h.SH Sat Dec 2 15:35:13 1995 - -Index: ext/Socket/Makefile.PL - - Update version number to 1.5. - -*** perl5.002b1c/ext/Socket/Makefile.PL Sat Nov 18 15:36:56 1995 ---- perl5.002b1d/ext/Socket/Makefile.PL Sat Dec 2 16:23:52 1995 - -Index: ext/Socket/Socket.pm - - Update to version 1.5. - -*** perl5.002b1c/ext/Socket/Socket.pm Sat Nov 18 15:37:03 1995 ---- perl5.002b1d/ext/Socket/Socket.pm Sat Dec 2 16:25:17 1995 - -Index: ext/Socket/Socket.xs - - Update to version 1.5. - This only supports the sockaddr_un -related functions if your - system has <sys/un.h>. SVR3 systems generally don't. - -*** perl5.002b1c/ext/Socket/Socket.xs Sat Nov 18 15:36:57 1995 ---- perl5.002b1d/ext/Socket/Socket.xs Sat Dec 2 15:46:20 1995 - -Index: h2ph.PL - - Add missing quotes. - -*** perl5.002b1c/h2ph.PL Sun Nov 19 23:00:39 1995 ---- perl5.002b1d/h2ph.PL Mon Nov 27 10:14:50 1995 - -Index: hints/bsdi_bsdos.sh - - Updated and renamed file. - -*** perl5.002b1c/hints/bsdi_bsdos.sh Thu Jan 19 19:08:34 1995 ---- perl5.002b1d/hints/bsdi_bsdos.sh Sun Nov 26 16:50:26 1995 - -Index: pod/perlre.pod - - Mention 65536 limit explicitly. - -*** perl5.002b1c/pod/perlre.pod Wed Nov 15 21:35:31 1995 ---- perl5.002b1d/pod/perlre.pod Sun Nov 26 16:57:20 1995 - -------------- -Version 5.002b1c -------------- - -This is patch.2b1c to perl5.002beta1. This patch includes - lib/SelfLoader, version 1.06, and - lib/Devel/SelfStubber, version 1.01. -These versions include prototype support. - -This is simply re-posting these library modules. -I have also updated MANIFEST to include them. - - -Index: MANIFEST -*** perl5.002b1b/MANIFEST Sat Dec 2 16:13:24 1995 ---- perl5.002b1c/MANIFEST Sat Dec 2 16:12:54 1995 - -Index: lib/Devel/SelfStubber.pm -*** /dev/null Fri Dec 1 16:03:22 1995 ---- perl5.002b1c/lib/Devel/SelfStubber.pm Sun Nov 26 16:14:19 1995 - -Index: lib/SelfLoader.pm -*** /dev/null Fri Dec 1 16:03:22 1995 ---- perl5.002b1c/lib/SelfLoader.pm Sun Nov 26 16:14:50 1995 - -------------- -Version 5.002b1b -------------- - -This is patch.2b1b to perl5.002beta1. This is simply -MakeMaker-5.10. Nothing else is included. - -It contains: - -Upgrade to MakeMaker-5.10 -and a revised minimod.PL that now writes a pod section into ExtUtils::Miniperl. - -Index: lib/ExtUtils/Liblist.pm -*** perl5.002b1a/lib/ExtUtils/Liblist.pm Mon Nov 13 22:03:29 1995 ---- perl5.002b1b/lib/ExtUtils/Liblist.pm Sat Dec 2 15:58:00 1995 - -Index: lib/ExtUtils/MakeMaker.pm -*** perl5.002b1a/lib/ExtUtils/MakeMaker.pm Sat Nov 18 16:01:05 1995 ---- perl5.002b1b/lib/ExtUtils/MakeMaker.pm Sat Dec 2 15:58:01 1995 - -Index: lib/ExtUtils/Manifest.pm -*** perl5.002b1a/lib/ExtUtils/Manifest.pm Mon Nov 13 22:03:30 1995 ---- perl5.002b1b/lib/ExtUtils/Manifest.pm Sat Dec 2 15:58:02 1995 - -Index: minimod.PL -*** perl5.002b1a/minimod.PL Sun Nov 19 23:01:02 1995 ---- perl5.002b1b/minimod.PL Sat Dec 2 15:58:02 1995 - -------------- -Version 5.002b1a -------------- - -This is patch.2b1a to perl5.002beta1. This is simply -xsubpp-1.944. It includes perl prototype support. - -Index: XSUB.h - -Updated to match xsubpp-1.944. Includes perl prototype support. - -*** perl5.002beta1/XSUB.h Fri Nov 10 13:11:02 1995 ---- perl5.002b1a/XSUB.h Sat Dec 2 15:43:54 1995 - -Index: lib/ExtUtils/xsubpp - -Updated to xsubpp-1.944. Includes perl prototype support. - -*** perl5.002beta1/lib/ExtUtils/xsubpp Mon Nov 20 11:03:49 1995 ---- perl5.002b1a/lib/ExtUtils/xsubpp Sat Dec 2 15:43:55 1995 - - - -Here are the detailed changes from 5.001m to 5.002beta1: - -# rm -f Doc/perl5-notes # Obsolete -# rm -f c2ph.SH # Replaced by c2ph.PL -# rm -f emacs/cperl-mode # Obsolete -# rm -f emacs/emacs19 # Obsolete -# rm -f emacs/perl-mode.el # Obsolete -# rm -f emacs/perldb.el # Obsolete -# rm -f emacs/perldb.pl # Obsolete -# rm -f emacs/tedstuff # Obsolete -# rm -f h2ph.SH # Replaced by h2ph.PL -# rm -f h2xs.SH # Replaced by h2xs.PL -# rm -f hints/hpux_9.sh # Replaced by generic hpux.sh -# rm -f hints/sco_3.sh # Replaced by generic sco.sh -# rm -f perldoc.SH # Replaced by perldoc.PL -# rm -f pod/pod2html.SH # Replaced by pod2html.PL -# rm -f pod/pod2latex.SH # Replaced by pod2latex.PL -# rm -f pod/pod2man.SH # Replaced by pod2man.PL -# rm -f x2p/find2perl.SH # Replaced by find2perl.PL -# rm -f x2p/s2p.SH # Replaced by s2p.PL -# exit - - -Index: patchlevel.h -Incremented to 2! -*** perl5.001.lwall/patchlevel.h Sun Mar 12 22:29:12 1995 ---- perl5.002beta1/patchlevel.h Sat Nov 18 15:41:15 1995 - -Index: Changes -This includes the Changes file Larry sent me. I added the first -paragraph. -*** perl5.001.lwall/Changes Mon Mar 13 00:44:07 1995 ---- perl5.002beta1/Changes Sat Nov 18 15:43:29 1995 - -Index: Changes.Conf -An all too brief summary. -*** perl5.001.lwall/Changes.Conf Thu Oct 19 21:00:06 1995 ---- perl5.002beta1/Changes.Conf Mon Nov 20 10:08:05 1995 - -Index: Configure - -Upgraded to metaconfig PL60 (despite the erroneous metaconfig message. - -Layed some groundwork for support on non Unix systems, such as OS/2. -Define things such as .o vs. .obj, '' vs. .exe, .a vs. .lib, etc. - -Include I_LOCALE testing. - -Include checks for new library set-up. I don't want to ever have to -change this again. It's documented more clearly in INSTALL. - -Figure out correct string for $startperl (usually -#!/usr/local/bin/perl). - -Improve signal detection even more. Once again, the signal number -corresponding to sig_name[n] is n (up to NSIG-1). Gaps in signal -numbers (e.g. on Solaris) are allowed and are filled with -innocuous names such as NUM37 NUM38, etc., where the 37 or 38 -represents the actual signal number. - -Prereq: 3.0.1.8 -*** perl5.001.lwall/Configure Mon Oct 23 14:08:59 1995 ---- perl5.002beta1/Configure Mon Nov 20 10:00:33 1995 - -Index: INSTALL - -Explain the library directory structure. - -Remove some tailing whitespace. - -Indicate that only the interfaces to gdbm and db are provided, not -the libraries themselves. - -Add section on upgrading from previous versions of perl5.00x. - -Mention how to override old config.sh with Configure -D and -O. - -*** perl5.001.lwall/INSTALL Mon Oct 23 14:10:26 1995 ---- perl5.002beta1/INSTALL Mon Nov 20 10:46:48 1995 - -Index: MANIFEST - -In an attempt to make the distribution slightly less Unix specific, -I've changed .SH extraction to a .PL extraction where possible. -That way folks on systems without a shell can still get the -auxilliarly files such as find2perl (assuming they *can* build -perl). - -The emacs/ directory was hopelessly out of date. I don't use emacs, -but included a current cperl-mode.el - -*** perl5.001.lwall/MANIFEST Tue Nov 14 15:21:03 1995 ---- perl5.002beta1/MANIFEST Mon Nov 20 12:40:41 1995 - -Index: Makefile.SH - -Add variables for non unix systems. - -Add .PL file extraction logic. - -*** perl5.001.lwall/Makefile.SH Tue Nov 14 20:25:48 1995 ---- perl5.002beta1/Makefile.SH Mon Nov 20 15:56:12 1995 - -Index: XSUB.h - -Protect arguments of macros with (). - -*** perl5.001.lwall/XSUB.h Tue Mar 7 14:10:00 1995 ---- perl5.002beta1/XSUB.h Fri Nov 10 13:11:02 1995 - -Index: c2ph.PL -Replaces c2ph.SH. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/c2ph.PL Mon Nov 20 12:36:17 1995 - -Index: cflags.SH -Allow for .o or .obj in file names. -*** perl5.001.lwall/cflags.SH Thu Jan 19 19:06:13 1995 ---- perl5.002beta1/cflags.SH Tue Nov 14 15:18:41 1995 - -Index: config_H -Updated. -Prereq: 3.0.1.3 -*** perl5.001.lwall/config_H Thu Oct 19 21:01:14 1995 ---- perl5.002beta1/config_H Mon Nov 20 15:41:49 1995 - -Index: config_h.SH -Updated to match new Configure. -Prereq: 3.0.1.3 -*** perl5.001.lwall/config_h.SH Mon Oct 23 14:10:38 1995 ---- perl5.002beta1/config_h.SH Mon Nov 20 10:00:33 1995 - -Index: configpm -Add in routine to print out full config.sh file. -*** perl5.001.lwall/configpm Wed Jun 7 19:46:01 1995 ---- perl5.002beta1/configpm Tue Oct 31 11:51:52 1995 - -Index: doop.c -Check for sprintf memory overflow that can arise from things -like %999999s. - -*** perl5.001.lwall/doop.c Sun Jul 2 23:33:44 1995 ---- perl5.002beta1/doop.c Wed Nov 15 15:08:01 1995 - -Index: emacs/cperl-mode.el -New version. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/emacs/cperl-mode.el Sat Nov 11 16:29:33 1995 - -Index: embed.h -Remove unnecessary whichsigname introduced in patch.1n. -*** perl5.001.lwall/embed.h Tue Nov 14 15:21:08 1995 ---- perl5.002beta1/embed.h Wed Nov 15 14:48:47 1995 - -Index: ext/DB_File/DB_File.pm -Updated to version 1.01. -*** perl5.001.lwall/ext/DB_File/DB_File.pm Wed Jun 7 19:46:14 1995 ---- perl5.002beta1/ext/DB_File/DB_File.pm Tue Nov 14 14:14:25 1995 - -Index: ext/DB_File/DB_File.xs -Updated to version 1.01. -*** perl5.001.lwall/ext/DB_File/DB_File.xs Wed Jun 7 19:46:17 1995 ---- perl5.002beta1/ext/DB_File/DB_File.xs Tue Nov 14 14:14:37 1995 - -Index: ext/DB_File/Makefile.PL -Updated to version 1.01. -*** perl5.001.lwall/ext/DB_File/Makefile.PL Wed Feb 22 14:36:32 1995 ---- perl5.002beta1/ext/DB_File/Makefile.PL Tue Nov 14 14:14:17 1995 - -Index: ext/DB_File/typemap -Fix typemap to avoid core dump. -*** perl5.001.lwall/ext/DB_File/typemap Tue Oct 18 12:27:52 1994 ---- perl5.002beta1/ext/DB_File/typemap Tue Oct 31 11:53:28 1995 - -Index: ext/DynaLoader/DynaLoader.pm -Add parentheses to Carp::confess call. -*** perl5.001.lwall/ext/DynaLoader/DynaLoader.pm Thu Oct 19 20:13:25 1995 ---- perl5.002beta1/ext/DynaLoader/DynaLoader.pm Fri Nov 10 11:49:00 1995 - -Index: ext/DynaLoader/dl_os2.xs -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/ext/DynaLoader/dl_os2.xs Mon Nov 13 22:58:42 1995 - -Index: ext/Fcntl/Fcntl.xs -Add O_BINARY define for OS/2. -*** perl5.001.lwall/ext/Fcntl/Fcntl.xs Mon Oct 23 14:10:54 1995 ---- perl5.002beta1/ext/Fcntl/Fcntl.xs Mon Nov 13 23:01:40 1995 - -Index: ext/GDBM_File/GDBM_File.pm -Added a tiny bit of documentation, including how to get gdbm. -Shamelessly stolen from the DB_File.pm documentation. -*** perl5.001.lwall/ext/GDBM_File/GDBM_File.pm Wed Jun 7 19:46:34 1995 ---- perl5.002beta1/ext/GDBM_File/GDBM_File.pm Mon Nov 20 10:22:26 1995 - -Index: ext/GDBM_File/GDBM_File.xs -Add gdbm_EXISTS #define. -*** perl5.001.lwall/ext/GDBM_File/GDBM_File.xs Sat Jul 1 18:44:02 1995 ---- perl5.002beta1/ext/GDBM_File/GDBM_File.xs Sat Nov 11 14:25:50 1995 - -Index: ext/NDBM_File/hints/solaris.pl -Updated for MakeMaker 5.0x. -*** perl5.001.lwall/ext/NDBM_File/hints/solaris.pl Wed Jun 7 19:46:39 1995 ---- perl5.002beta1/ext/NDBM_File/hints/solaris.pl Fri Nov 10 10:39:23 1995 - -Index: ext/ODBM_File/hints/sco.pl -Updated for MakeMaker 5.0x. -*** perl5.001.lwall/ext/ODBM_File/hints/sco.pl Wed Jun 7 19:46:44 1995 ---- perl5.002beta1/ext/ODBM_File/hints/sco.pl Fri Nov 10 10:39:32 1995 - -Index: ext/ODBM_File/hints/solaris.pl -Updated for MakeMaker 5.0x. -*** perl5.001.lwall/ext/ODBM_File/hints/solaris.pl Wed Jun 7 19:46:46 1995 ---- perl5.002beta1/ext/ODBM_File/hints/solaris.pl Fri Nov 10 10:39:44 1995 - -Index: ext/ODBM_File/hints/svr4.pl -Updated for MakeMaker 5.0x. -*** perl5.001.lwall/ext/ODBM_File/hints/svr4.pl Wed Jun 7 19:46:48 1995 ---- perl5.002beta1/ext/ODBM_File/hints/svr4.pl Fri Nov 10 10:39:54 1995 - -Index: ext/POSIX/POSIX.pm -Remove POSIX_loadlibs relics from perl5alpha days. -*** perl5.001.lwall/ext/POSIX/POSIX.pm Thu Sep 21 19:14:19 1995 ---- perl5.002beta1/ext/POSIX/POSIX.pm Wed Nov 15 14:54:09 1995 - -Index: ext/POSIX/POSIX.xs -Change whichsigname(sig) back to sig_name[sig]. -*** perl5.001.lwall/ext/POSIX/POSIX.xs Mon Oct 23 14:11:01 1995 ---- perl5.002beta1/ext/POSIX/POSIX.xs Wed Nov 15 14:56:22 1995 - -Index: ext/SDBM_File/Makefile.PL -Updated for MakeMaker 5.0x to allow compilation on non-unix systems. -*** perl5.001.lwall/ext/SDBM_File/Makefile.PL Thu Jan 19 18:59:02 1995 ---- perl5.002beta1/ext/SDBM_File/Makefile.PL Tue Nov 14 11:16:43 1995 - -Index: ext/SDBM_File/sdbm/Makefile.PL -Updated for MakeMaker 5.0x to allow compilation on non-unix systems. -*** perl5.001.lwall/ext/SDBM_File/sdbm/Makefile.PL Wed Feb 22 14:36:47 1995 ---- perl5.002beta1/ext/SDBM_File/sdbm/Makefile.PL Tue Nov 14 11:17:16 1995 - -Index: ext/SDBM_File/sdbm/sdbm.c -Include OS/2 O_BINARY flag. -Prereq: 1.16 -*** perl5.001.lwall/ext/SDBM_File/sdbm/sdbm.c Wed Jun 7 19:46:57 1995 ---- perl5.002beta1/ext/SDBM_File/sdbm/sdbm.c Mon Nov 13 23:01:41 1995 - -Index: ext/Socket/Makefile.PL -Updated to 1.3. Actually we're up to 1.4, but I forgot to update -the Makefile.PL. -*** perl5.001.lwall/ext/Socket/Makefile.PL Thu Jan 19 18:59:06 1995 ---- perl5.002beta1/ext/Socket/Makefile.PL Sat Nov 18 15:36:56 1995 - -Index: ext/Socket/Socket.pm -Updated to 1.3. Actually we're up to 1.4, but I forgot to update -the version number. This adds some non-portable stuff to manipulate -structures in <sys/un.h>. I'll have to #ifdef it out in the next -patch. - -*** perl5.001.lwall/ext/Socket/Socket.pm Sat Jul 1 15:51:54 1995 ---- perl5.002beta1/ext/Socket/Socket.pm Sat Nov 18 15:37:03 1995 - -Index: ext/Socket/Socket.xs -Updated to 1.3. Actually we're up to 1.4, but I forgot to update -the version number. This adds some non-portable stuff to manipulate -structures in <sys/un.h>. I'll have to #ifdef it out in the next -patch. - -*** perl5.001.lwall/ext/Socket/Socket.xs Sat Jul 1 15:51:56 1995 ---- perl5.002beta1/ext/Socket/Socket.xs Sat Nov 18 15:36:57 1995 - -Index: global.sym -Remove unnecessary whichsigname that was added in patch.1n. -*** perl5.001.lwall/global.sym Tue Nov 14 15:21:11 1995 ---- perl5.002beta1/global.sym Wed Nov 15 14:58:14 1995 - -Index: h2ph.PL -Converted from h2ph.SH. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/h2ph.PL Sun Nov 19 23:00:39 1995 - -Index: h2xs.PL -Converted from h2xs.SH. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/h2xs.PL Sun Nov 19 22:37:58 1995 - -Index: hints/aix.sh -Add gcc-specific -Xlinker, if you're using gcc. -*** perl5.001.lwall/hints/aix.sh Thu Oct 19 21:02:08 1995 ---- perl5.002beta1/hints/aix.sh Mon Nov 13 23:03:33 1995 - -Index: hints/freebsd.sh -Warn about possible here-document problem. -*** perl5.001.lwall/hints/freebsd.sh Sat Jul 1 18:44:07 1995 ---- perl5.002beta1/hints/freebsd.sh Sat Nov 18 16:21:20 1995 - -Index: hints/hpux.sh -Replace old hpux_9.sh, since this works for 9 and 10. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/hints/hpux.sh Mon Nov 20 09:53:28 1995 - -Index: hints/irix_6_2.sh -New hint file. This should be merged with irix_6.sh, since it's -almost identical. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/hints/irix_6_2.sh Mon Nov 20 11:16:55 1995 - -Index: hints/ncr_tower.sh -Give pointers about directory functions. -*** perl5.001.lwall/hints/ncr_tower.sh Tue Oct 18 12:33:25 1994 ---- perl5.002beta1/hints/ncr_tower.sh Tue Oct 31 11:57:51 1995 - -Index: hints/netbsd.sh -Updated. -*** perl5.001.lwall/hints/netbsd.sh Wed Jun 7 19:47:45 1995 ---- perl5.002beta1/hints/netbsd.sh Mon Nov 13 23:04:17 1995 - -Index: hints/os2.sh -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/hints/os2.sh Tue Nov 14 11:07:33 1995 - -Index: hints/sco.sh -Renamed from sco_3, since it should apply to most recent versions. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/hints/sco.sh Mon Jun 5 11:50:11 1995 - -Index: hints/solaris_2.sh -Remove temporary file try.c. -*** perl5.001.lwall/hints/solaris_2.sh Thu Oct 19 21:02:37 1995 ---- perl5.002beta1/hints/solaris_2.sh Mon Nov 20 16:01:50 1995 - -Index: hints/ultrix_4.sh -Note that you can substitute sh5 for sh to get a big speed up. -*** perl5.001.lwall/hints/ultrix_4.sh Mon Feb 13 20:15:05 1995 ---- perl5.002beta1/hints/ultrix_4.sh Sat Nov 11 17:11:41 1995 - -Index: installman -Quit if they just asked for help with -h. -*** perl5.001.lwall/installman Sat Jul 1 18:44:09 1995 ---- perl5.002beta1/installman Mon Nov 6 11:16:43 1995 - -Index: installperl -Updated to use Config rather than hand-reading config.sh again. - -Install h2ph. - -Create site_perl and site_perl/archname directories. - -*** perl5.001.lwall/installperl Sat Jul 1 18:44:12 1995 ---- perl5.002beta1/installperl Mon Nov 20 12:55:08 1995 - -Index: lib/AutoSplit.pm -Handle OS/2 backslashes. - -Tim's prototype patch. - -Less enthusiastic checking of autoloader_seen. - -*** perl5.001.lwall/lib/AutoSplit.pm Sat Jul 1 15:52:03 1995 ---- perl5.002beta1/lib/AutoSplit.pm Wed Nov 15 15:06:19 1995 - -Index: lib/Cwd.pm -Updated for Unix, NT, and OS/2. -*** perl5.001.lwall/lib/Cwd.pm Wed Jun 7 19:48:18 1995 ---- perl5.002beta1/lib/Cwd.pm Mon Nov 13 23:01:38 1995 - -Index: lib/ExtUtils/Liblist.pm -Updated to MakeMaker 5.06. -*** perl5.001.lwall/lib/ExtUtils/Liblist.pm Wed Jun 7 19:48:27 1995 ---- perl5.002beta1/lib/ExtUtils/Liblist.pm Mon Nov 13 22:03:29 1995 - -Index: lib/ExtUtils/MakeMaker.pm -Updated to MakeMaker 5.06. -Prereq: 1.21 -*** perl5.001.lwall/lib/ExtUtils/MakeMaker.pm Thu Oct 19 21:02:57 1995 ---- perl5.002beta1/lib/ExtUtils/MakeMaker.pm Sat Nov 18 16:01:05 1995 - -Index: lib/ExtUtils/Manifest.pm -Updated to MakeMaker 5.06. -*** perl5.001.lwall/lib/ExtUtils/Manifest.pm Sat Jul 1 15:52:11 1995 ---- perl5.002beta1/lib/ExtUtils/Manifest.pm Mon Nov 13 22:03:30 1995 - -Index: lib/ExtUtils/xsubpp -Updated to xsubpp-1.923. -*** perl5.001.lwall/lib/ExtUtils/xsubpp Sat Jul 1 20:08:00 1995 ---- perl5.002beta1/lib/ExtUtils/xsubpp Mon Nov 20 11:03:49 1995 - -Index: lib/File/Find.pm -OS/2 patch for nlink. -*** perl5.001.lwall/lib/File/Find.pm Sat Jul 1 15:52:13 1995 ---- perl5.002beta1/lib/File/Find.pm Wed Nov 15 15:20:03 1995 - -Index: lib/Net/Ping.pm -Updated to Net::Ping 1.00. -*** perl5.001.lwall/lib/Net/Ping.pm Wed Jun 7 19:49:13 1995 ---- perl5.002beta1/lib/Net/Ping.pm Tue Oct 31 11:15:55 1995 - -Index: lib/Shell.pm -Updated for OS/2 or Unix. -*** perl5.001.lwall/lib/Shell.pm Tue Oct 18 12:34:59 1994 ---- perl5.002beta1/lib/Shell.pm Mon Nov 13 23:01:40 1995 - -Index: lib/Test/Harness.pm -Updated for OS/2 or Unix. -*** perl5.001.lwall/lib/Test/Harness.pm Tue Oct 18 12:38:35 1994 ---- perl5.002beta1/lib/Test/Harness.pm Mon Nov 13 23:01:40 1995 - -Index: lib/Text/Tabs.pm -Updated. -*** perl5.001.lwall/lib/Text/Tabs.pm Wed Jun 7 19:49:20 1995 ---- perl5.002beta1/lib/Text/Tabs.pm Sat Nov 18 16:08:55 1995 - -Index: lib/Text/Wrap.pm -New module. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/lib/Text/Wrap.pm Sat Nov 18 16:08:56 1995 - -Index: lib/diagnostics.pm -New module. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/lib/diagnostics.pm Tue Nov 14 16:16:36 1995 - -Index: lib/lib.pm -Automatically try to load an architecture-dependent library too. -*** perl5.001.lwall/lib/lib.pm Sat Jul 1 15:51:37 1995 ---- perl5.002beta1/lib/lib.pm Fri Nov 10 16:50:43 1995 - -Index: lib/overload.pm -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/lib/overload.pm Sat Nov 18 16:03:33 1995 - -Index: lib/perl5db.pl -Emacs and OS/2 fixes. -*** perl5.001.lwall/lib/perl5db.pl Sun Mar 12 22:34:53 1995 ---- perl5.002beta1/lib/perl5db.pl Wed Nov 15 22:37:45 1995 - -Index: lib/splain -New file -- same as diagnostics.pm. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/lib/splain Tue Nov 14 16:16:36 1995 - -Index: mg.c -Remove unnecessary whichsigname introduced in 5.001n. -*** perl5.001.lwall/mg.c Tue Nov 14 15:31:03 1995 ---- perl5.002beta1/mg.c Wed Nov 15 15:44:10 1995 - -Index: minimod.PL -Made c++ friendly. -*** perl5.001.lwall/minimod.PL Mon Feb 13 20:15:47 1995 ---- perl5.002beta1/minimod.PL Sun Nov 19 23:01:02 1995 - -Index: miniperlmain.c -Made c++ friendly. -*** perl5.001.lwall/miniperlmain.c Mon Feb 13 21:48:50 1995 ---- perl5.002beta1/miniperlmain.c Sat Nov 18 15:48:10 1995 - -Index: op.c -Larry's post 5.001mx prototype patch. -*** perl5.001.lwall/op.c Tue Nov 14 20:36:08 1995 ---- perl5.002beta1/op.c Wed Nov 15 22:10:36 1995 - -Index: os2/Makefile.SH -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/Makefile.SH Tue Nov 14 11:07:32 1995 - -Index: os2/POSIX.mkfifo -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/POSIX.mkfifo Tue Nov 14 10:48:16 1995 - -Index: os2/README -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/README Tue Nov 14 14:42:13 1995 - -Index: os2/diff.Makefile -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/diff.Makefile Tue Nov 14 11:09:29 1995 - -Index: os2/diff.configure -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/diff.configure Sun Nov 12 01:31:34 1995 - -Index: os2/diff.installperl -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/diff.installperl Tue Nov 14 11:09:28 1995 - -Index: os2/diff.mkdep -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/diff.mkdep Tue Nov 14 11:09:28 1995 - -Index: os2/diff.x2pMakefile -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/diff.x2pMakefile Tue Nov 14 11:09:29 1995 - -Index: os2/os2.c -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/os2.c Tue Nov 14 11:07:33 1995 - -Index: os2/os2ish.h -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/os2ish.h Tue Nov 14 11:07:33 1995 - -Index: perl.c -Add -h option to print out usage. - -Add 'beta' to version number. - -Add new library hierarchy. See INSTALL. - -*** perl5.001.lwall/perl.c Tue Nov 14 20:09:28 1995 ---- perl5.002beta1/perl.c Sun Nov 19 16:11:29 1995 - -Index: perl.h - -Move around some includes for OS/2. - -Check for <locale.h> - -*** perl5.001.lwall/perl.h Thu Nov 9 19:50:43 1995 ---- perl5.002beta1/perl.h Wed Nov 15 17:13:16 1995 - -Index: perldoc.PL - -Moved from perldoc.SH. Updated to handle no nroff. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/perldoc.PL Tue Nov 14 14:57:57 1995 - -Index: pod/Makefile -Updated for new pods and for new .PL format. -*** perl5.001.lwall/pod/Makefile Wed Jun 7 19:50:02 1995 ---- perl5.002beta1/pod/Makefile Mon Nov 20 13:00:50 1995 - -Index: pod/perl.pod -Updated to refer to new pods. -*** perl5.001.lwall/pod/perl.pod Thu Oct 5 19:54:43 1995 ---- perl5.002beta1/pod/perl.pod Sat Nov 18 17:23:58 1995 - -Index: pod/perlbook.pod -Updated info. -*** perl5.001.lwall/pod/perlbook.pod Wed Feb 22 18:32:35 1995 ---- perl5.002beta1/pod/perlbook.pod Sat Nov 11 17:17:23 1995 - -Index: pod/perlbot.pod -Include SUPER stuff. -*** perl5.001.lwall/pod/perlbot.pod Wed Jun 7 19:50:14 1995 ---- perl5.002beta1/pod/perlbot.pod Fri Nov 10 17:27:33 1995 - -Index: pod/perlcall.pod -Change perlapi to perlxs. -*** perl5.001.lwall/pod/perlcall.pod Wed Jun 7 19:50:17 1995 ---- perl5.002beta1/pod/perlcall.pod Tue Oct 31 15:37:57 1995 - -Index: pod/perldata.pod -Tom's updates. -*** perl5.001.lwall/pod/perldata.pod Sun Mar 12 22:35:14 1995 ---- perl5.002beta1/pod/perldata.pod Sat Nov 18 17:23:59 1995 - -Index: pod/perldiag.pod -Tom's updates. -*** perl5.001.lwall/pod/perldiag.pod Tue Nov 14 22:04:11 1995 ---- perl5.002beta1/pod/perldiag.pod Sun Nov 19 22:10:58 1995 - -Index: pod/perldsc.pod -Tom's updates. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/pod/perldsc.pod Sat Nov 18 17:24:22 1995 - -Index: pod/perlform.pod -Tom's updates. -*** perl5.001.lwall/pod/perlform.pod Wed Feb 22 18:32:41 1995 ---- perl5.002beta1/pod/perlform.pod Sat Nov 18 17:23:59 1995 - -Index: pod/perlfunc.pod -Tom's updates. -*** perl5.001.lwall/pod/perlfunc.pod Tue Nov 14 15:31:33 1995 ---- perl5.002beta1/pod/perlfunc.pod Sat Nov 18 17:24:01 1995 - -Index: pod/perlguts.pod -Change perlapi to perlxs. -*** perl5.001.lwall/pod/perlguts.pod Wed Jun 7 19:50:25 1995 ---- perl5.002beta1/pod/perlguts.pod Tue Oct 31 15:38:18 1995 - -Index: pod/perlipc.pod -New file from Tom. -*** perl5.001.lwall/pod/perlipc.pod Wed Feb 22 18:32:48 1995 ---- perl5.002beta1/pod/perlipc.pod Sat Nov 18 17:24:02 1995 - -Index: pod/perllol.pod -New file from Tom. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/pod/perllol.pod Sat Nov 18 17:24:22 1995 - -Index: pod/perlmod.pod -Updates from Tom. -*** perl5.001.lwall/pod/perlmod.pod Wed Feb 22 18:32:51 1995 ---- perl5.002beta1/pod/perlmod.pod Sat Nov 18 17:24:03 1995 - -Index: pod/perlop.pod -Add missing '>'. -*** perl5.001.lwall/pod/perlop.pod Tue Nov 14 15:31:37 1995 ---- perl5.002beta1/pod/perlop.pod Sat Nov 18 17:24:03 1995 - -Index: pod/perlpod.pod -Add note about =cut operator. -*** perl5.001.lwall/pod/perlpod.pod Tue Oct 18 12:39:53 1994 ---- perl5.002beta1/pod/perlpod.pod Sun Nov 19 22:22:59 1995 - -Index: pod/perlref.pod -Updates from Tom. -*** perl5.001.lwall/pod/perlref.pod Tue Mar 7 00:56:46 1995 ---- perl5.002beta1/pod/perlref.pod Sat Nov 18 17:24:04 1995 - -Index: pod/perlsyn.pod -Updates from Tom. -*** perl5.001.lwall/pod/perlsyn.pod Sat Mar 11 14:13:48 1995 ---- perl5.002beta1/pod/perlsyn.pod Sat Nov 18 17:24:04 1995 - -Index: pod/perlxs.pod -Updated. -*** perl5.001.lwall/pod/perlxs.pod Tue Nov 14 15:31:42 1995 ---- perl5.002beta1/pod/perlxs.pod Sun Nov 19 22:12:44 1995 - -Index: pod/perlxstut.pod -New file from Jeff. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/pod/perlxstut.pod Mon Nov 20 13:02:12 1995 - -Index: pod/pod2html.PL -Updated -- version 1.15 merges Tom's suggestions and ideas from -pod2fm. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/pod/pod2html.PL Sun Nov 19 22:11:59 1995 - -Index: pod/pod2latex.PL -Changed to a .PL file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/pod/pod2latex.PL Wed Nov 15 22:32:39 1995 - -Index: pod/pod2man.PL -Changed to a .PL file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/pod/pod2man.PL Wed Nov 15 22:32:51 1995 - -Index: pp_ctl.c -Add OS/2 stuff. -*** perl5.001.lwall/pp_ctl.c Wed Nov 15 00:37:25 1995 ---- perl5.002beta1/pp_ctl.c Wed Nov 15 21:46:37 1995 - -Index: pp_sys.c -Add OS/2 stuff. -*** perl5.001.lwall/pp_sys.c Tue Nov 14 21:03:06 1995 ---- perl5.002beta1/pp_sys.c Wed Nov 15 21:51:33 1995 - -Index: proto.h -Add OS/2 stuff to better protect MYMALLOC. -*** perl5.001.lwall/proto.h Tue Nov 14 21:01:28 1995 ---- perl5.002beta1/proto.h Wed Nov 15 21:55:23 1995 - -Index: t/TEST -Add OS/2 check for perl.exe. -*** perl5.001.lwall/t/TEST Sat Jan 14 19:35:33 1995 ---- perl5.002beta1/t/TEST Tue Nov 14 11:22:08 1995 - -Index: t/lib/db-btree.t -Updated. -*** perl5.001.lwall/t/lib/db-btree.t Tue Oct 18 12:44:05 1994 ---- perl5.002beta1/t/lib/db-btree.t Tue Oct 31 11:53:29 1995 - -Index: t/op/overload.t -Updated. -*** perl5.001.lwall/t/op/overload.t Tue Nov 14 20:56:57 1995 ---- perl5.002beta1/t/op/overload.t Mon Nov 20 15:48:56 1995 - -Index: t/op/stat.t -Add note about tmpfs failures. -*** perl5.001.lwall/t/op/stat.t Tue Oct 18 12:46:23 1994 ---- perl5.002beta1/t/op/stat.t Wed Nov 15 22:00:50 1995 - -Index: toke.c -Patch from Paul M. for source filters. -*** perl5.001.lwall/toke.c Tue Nov 14 21:59:50 1995 ---- perl5.002beta1/toke.c Wed Nov 15 22:08:23 1995 - -Index: util.c -Varargs fixes. -*** perl5.001.lwall/util.c Wed Jun 7 19:51:19 1995 ---- perl5.002beta1/util.c Tue Nov 14 10:46:37 1995 - -Index: writemain.SH -Make c++ friendly. -*** perl5.001.lwall/writemain.SH Wed Feb 8 19:44:20 1995 ---- perl5.002beta1/writemain.SH Sat Nov 18 15:51:55 1995 - -Index: x2p/Makefile.SH -Updated for .PL extraction. -*** perl5.001.lwall/x2p/Makefile.SH Wed Jun 7 19:51:37 1995 ---- perl5.002beta1/x2p/Makefile.SH Sun Nov 19 23:17:39 1995 - -Index: x2p/a2p.h -Add OS/2 stuff. -*** perl5.001.lwall/x2p/a2p.h Thu Oct 19 21:03:58 1995 ---- perl5.002beta1/x2p/a2p.h Tue Nov 14 10:46:57 1995 - -Index: x2p/cflags.SH -Add .obj for OS/2. -*** perl5.001.lwall/x2p/cflags.SH Tue Oct 18 12:47:34 1994 ---- perl5.002beta1/x2p/cflags.SH Tue Nov 14 15:18:27 1995 - -Index: x2p/find2perl.PL -Changed from .SH to .PL. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/x2p/find2perl.PL Sun Nov 19 23:11:58 1995 - -Index: x2p/s2p.PL -Changed from .SH to .PL extraction. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/x2p/s2p.PL Sun Nov 19 23:14:59 1995 |
