diff options
Diffstat (limited to 'contrib/ntp/html/driver44.htm')
| -rwxr-xr-x | contrib/ntp/html/driver44.htm | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/contrib/ntp/html/driver44.htm b/contrib/ntp/html/driver44.htm new file mode 100755 index 0000000..0d29384 --- /dev/null +++ b/contrib/ntp/html/driver44.htm @@ -0,0 +1,131 @@ +<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<html>
+<head>
+ <title>NeoClock4X</title>
+
+ <meta http-equiv="content-type"
+ content="text/html; charset=ISO-8859-15">
+</head>
+ <body>
+
+<h1>NeoClock4X - DCF77 / TDF serial line receiver<br>
+ </h1>
+
+<hr width="100%" size="2">
+<h2>Synopsis</h2>
+
+<table cellpadding="0" cellspacing="0" border="0" width="100%">
+ <tbody>
+ <tr>
+ <td valign="top">
+ <table cellpadding="2" cellspacing="0" border="0" width="100%">
+ <tbody>
+ <tr>
+ <td valign="top">Adress<br>
+ </td>
+ <td valign="top">127.127.44.u<br>
+ </td>
+ </tr>
+ <tr>
+ <td valign="top">Reference ID<br>
+ </td>
+ <td valign="top">neol<br>
+ </td>
+ </tr>
+ <tr>
+ <td valign="top">Driver ID<br>
+ </td>
+ <td valign="top">NEOCLK4X<br>
+ </td>
+ </tr>
+ <tr>
+ <td valign="top">Serial Port<br>
+ </td>
+ <td valign="top">/dev/neoclock4x-u<br>
+ </td>
+ </tr>
+
+ </tbody>
+ </table>
+ <br>
+ </td>
+ <td valign="top" align="right"><a href="http://www.linum.com"><img
+ src="pic/neoclock4x.gif" alt="NeoClock4X - DCF77 receiver" width="150"
+ height="195">
+ </a><br>
+ </td>
+ </tr>
+
+ </tbody>
+</table>
+
+<hr width="100%" size="2">
+<h2>Description</h2>
+ The refclock_neoclock4x driver supports the NeoClock4X receiver available
+ from <a href="http://www.linum.com">Linum Software GmbH</a>. The receiver
+ is available as a <a href="http://www.dcf77.de">DCF77</a> or TDF receiver.
+ Both receivers have the same output string. For more information about the
+ NeoClock4X receiver please visit <a
+ href="http://www.linum.com/redir/jump/id=neoclock4x&action=redir">http://www.linum.com/redir/jump/id=neoclock4x&action=redir</a>.
+
+<hr width="100%" size="2">
+<h2>Fudge Factors</h2>
+
+<dl>
+ <dt> <b><a href="clockopt.htm">time1 time</a></b></dt>
+ <dd> Specifies the time offset calibration factor with the default value
+ off 0.16958333 seconds. This offset is used to correct serial line and
+operating system delays incurred in capturing time stamps. If you want to
+fudge the time1 offset <b>ALWAYS</b> add a value off 0.16958333. This is
+neccessary to compensate to delay that is caused by transmit the timestamp
+at 2400 Baud. If you want to compensate the delay that the DCF77 or TDF radio
+signal takes to travel to your site simply add the needed millisecond delay
+to the given value. Note that the time here is given in seconds.</dd>
+ <dd>Default setting is 0.16958333 seconds.<br>
+ </dd>
+</dl>
+
+<dl>
+ <dt> <b><a href="file:///E:/ntp-4.1.1a/html/clockopt.htm">time2 time</a></b></dt>
+ <dd> Not used by this driver.</dd>
+</dl>
+
+<dl>
+ <dt> <a href="clockopt.htm"><b>flag1 0 | 1</b></a></dt>
+ <dd>When set to 1 the driver will feed ntp with timestampe even if the
+radio signal is lost. In this case an internal backup clock generates the
+timestamps. This is ok as long as the receiver is synced once since the receiver
+is able to keep time for a long period.</dd>
+ <dd>Default setting is 0 = don't synchronize to CMOS clock.<br>
+ </dd>
+ <dd><br>
+ </dd>
+ <dt> <a href="clockopt.htm"><b>flag2 0 | 1</b></a></dt>
+ <dd>You can allow the NeoClock4X driver to use the quartz clock even if
+ it is never synchronized to a radio clock. This is usally not a good idea
+ if you want preceise timestamps since the CMOS clock is maybe not adjusted
+ to a dst status change. So <b>PLEASE</b> switch this only on if you now
+what you're doing.</dd>
+ <dd>Default setting is 0 = don't synchronize to unsynchronized CMOS clock.<br>
+ </dd>
+ <dt><br>
+ </dt>
+ <dt><a href="clockopt.htm"><b>flag3 0 | 1</b></a></dt>
+ <dd> Not used by this driver.<tt><tt><tt><tt><tt><tt> </tt></tt></tt></tt></tt></tt></dd>
+ <dd><br>
+ </dd>
+ <dt> <a href="clockopt.htm"><b>flag4 0 | 1</b></a></dt>
+ <dd>It is recommended to allow extensive logging while you setup the NeoClock4X
+ receiver. If you activate flag4 every received data is logged. You should
+ turn off flag4 as soon as the clock works as expected to reduce logfile
+cluttering.</dd>
+ <dd>Default setting is 0 = don't log received data and converted utc time.<br>
+ </dd>
+</dl>
+
+<hr width="100%" size="2">Please send any comments or question to <a
+ href="mailto:neoclock4@linum.com">neoclock4x@linum.com</a>.<br>
+ <br>
+ <br>
+</body>
+</html>
|
