1 files changed, 0 insertions, 96 deletions
diff --git a/contrib/ntp/html/driver34.htm b/contrib/ntp/html/driver34.htm
deleted file mode 100644
index c114c72..0000000
--- a/contrib/ntp/html/driver34.htm
+++ /dev/null
@@ -1,96 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML//EN">
-<html> <head>
-<meta http-equiv="Content-Type" content="text/html; charset=iso8859-1">
-<title>Ultralink Clock</title>
-</head>
-
-<body>
-<h3>Ultralink Clock</h3>
-
-<hr>
-<h4>Synopsis</h4>
-Address: 127.127.34.<i>u</i><br>
-Reference ID: <TT>WWVB</TT><br>
-Driver ID: <tt>ULINK</tt><br>
-Serial Port: <tt>/dev/wwvb<i>u</i></tt>; 9600 bps, 8-bits,
-no parity<br>
-<br>Features: <tt>(none)</tt>
-<h4>Description</h4>
-This driver supports the Ultralink Model 320 RS-232 powered WWVB receiver.  PDF specs available on <a href="http://www.ulio.com">www.ulio.com</a>.
-This driver also supports the Model 330,331,332 decoders in both polled or continous time code mode.  Leap second and quality are supported.
-
-<P>Most of this code is originally from refclock_wwvb.c with thanks.  Any mistakes are mine.  Any improvements are welcome.
-<hr>
-<pre>
-  The Model 320 timecode format is:
- 
-   <cr><lf>SQRYYYYDDD+HH:MM:SS.mmLT<cr>
- 
-  where:
- 
-  S = 'S' -- sync'd in last hour, '0'-'9' - hours x 10 since last update, else '?'
-  Q = Number of correlating time-frames, from 0 to 5
-  R = 'R' -- reception in progress, 'N' -- Noisy reception, ' ' -- standby mode
-  YYYY = year from 1990 to 2089
-  DDD = current day from 1 to 366
-  + = '+' if current year is a leap year, else ' '
-  HH = UTC hour 0 to 23
-  MM = Minutes of current hour from 0 to 59
-  SS = Seconds of current minute from 0 to 59
-  mm = 10's milliseconds of the current second from 00 to 99
-  L  = Leap second pending at end of month -- 'I' = inset, 'D'=delete
-  T  = DST <-> STD transition indicators
- 
-  Note that this driver does not do anything with the T flag.
- 
-  The M320 also has a 'U' command which returns UT1 correction information.
-  It is not used in this driver.
-</pre>
-<hr>
-<pre>
-  The Model 33x timecode format is:
-
-    S9+D 00 YYYY+DDDUTCS HH:MM:SSl+5
-
-  Where:
-
-  S =    sync indicator S insync N not in sync
-         the sync flag is WWVB decoder sync
-         nothing to do with time being correct
-  9+ =   signal level 0 thru 9+ If over 9 indicated as 9+
-  D  =   data bit ( fun to watch but useless ;-)
-  space
-  00 =   hours since last GOOD WWVB frame sync
-  space
-  YYYY = current year
-  +  =   leap year indicator
-  DDD =  day of year
-  UTC =  timezone (always UTC)
-  S  =   daylight savings indicator
-  space
-  HH  =  hours
-  :  =   This is the REAL in sync indicator (: = insync)
-  MM  =  minutes
-  :  =   : = in sync ? = NOT in sync
-  SS  =  seconds
-  L  =   leap second flag
-  +5 =   UT1 correction (sign + digit ))
- 
-  This driver ignores UT1 correction,DST indicator,Leap year
-  and signal level.
-
-</pre>
-<hr>
-<pre>
-
-Fudge factors
-	 flag1  polling enable (1=poll 0=no poll) 
-
-
-</pre>
-<hr>
-    <address><a href="mailto:dstrout@linuxfoundary.com">mail</a></address>
-<!-- hhmts start -->
-Last modified: Tue Sep 14 05:53:08 EDT 1999
-<!-- hhmts end -->
-</body> </html>