1 files changed, 0 insertions, 131 deletions
diff --git a/contrib/ntp/html/driver3.htm b/contrib/ntp/html/driver3.htm
deleted file mode 100644
index 47511d8..0000000
--- a/contrib/ntp/html/driver3.htm
+++ /dev/null
@@ -1,131 +0,0 @@
-<HTML>
-<HEAD>
-   <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
-   <META NAME="GENERATOR" CONTENT="Mozilla/4.01 [en] (Win95; I) [Netscape]">
-   <TITLE>PSTI/Traconex 1020 WWV/WWVH Receiver
-</TITLE>
-</HEAD>
-<BODY>
-
-<H3>
-PSTI/Traconex 1020 WWV/WWVH Receiver</H3>
-
-<HR>
-<H4>
-Synopsis</H4>
-Address: 127.127.3.<I>u</I>
-<BR>Reference ID: <TT>WWV</TT>
-<BR>Driver ID: <TT>WWV_PST</TT>
-<BR>Serial Port: <TT>/dev/wwv<I>u</I></TT>; 9600 baud, 8-bits, no parity
-<BR>Features: <TT>tty_clk</TT>
-<H4>
-Description</H4>
-This driver supports the PSTI 1010 and Traconex 1020 WWV/WWVH Receivers.
-No specific claim of accuracy is made for these receiver, but actual experience
-suggests that 10 ms would be a conservative assumption.
-
-<P>The DIP-switches should be set for 9600 bps line speed, 24-hour day-of-year
-format and UTC time zone. Automatic correction for DST should be disabled.
-It is very important that the year be set correctly in the DIP-switches;
-otherwise, the day of year will be incorrect after 28 April of a normal
-or leap year. The propagation delay DIP-switches should be set according
-to the distance from the transmitter for both WWV and WWVH, as described
-in the instructions. While the delay can be set only to within 11 ms, the
-fudge time1 parameter can be used for vernier corrections.
-
-<P>Using the poll sequence <TT>QTQDQM</TT>, the response timecode is in
-three sections totalling 50 ASCII printing characters, as concatenated
-by the driver, in the following format:
-<PRE>ahh:mm:ss.fffs&lt;cr> yy/dd/mm/ddd&lt;cr>
-frdzycchhSSFTttttuuxx&lt;cr>
-
-on-time = first &lt;cr>
-hh:mm:ss.fff = hours, minutes, seconds, milliseconds
-a = AM/PM indicator (' ' for 24-hour mode)
-yy = year (from DIPswitches)
-dd/mm/ddd = day of month, month, day of year
-s = daylight-saving indicator (' ' for 24-hour mode)
-f = frequency enable (O = all frequencies enabled)
-r = baud rate (3 = 1200, 6 = 9600)
-d = features indicator (@ = month/day display enabled)
-z = time zone (0 = UTC)
-y = year (5 = 91)
-cc = WWV propagation delay (52 = 22 ms)
-hh = WWVH propagation delay (81 = 33 ms)
-SS = status (80 or 82 = operating correctly)
-F = current receive frequency (4 = 15 MHz)
-T = transmitter (C = WWV, H = WWVH)
-tttt = time since last update (0000 = minutes)
-uu = flush character (03 = ^c)
-xx = 94 (unknown)</PRE>
-The alarm condition is indicated by other than <TT>8</TT> at <TT>a</TT>,
-which occurs during initial synchronization and when received signal is
-lost for an extended period; unlock condition is indicated by other than
-<TT>0000</TT> in the <TT>tttt</TT> subfield.
-<H4>
-Monitor Data</H4>
-When enabled by the <TT>flag4</TT> fudge flag, every received timecode
-is written as-is to the <TT>clockstats</TT> file.
-<H4>
-Fudge Factors</H4>
-
-<DL>
-<DT>
-<TT>time1 <I>time</I></TT></DT>
-
-<DD>
-Specifies the time offset calibration factor, in seconds and fraction,
-with default 0.0.</DD>
-
-<DT>
-<TT>time2 <I>time</I></TT></DT>
-
-<DD>
-Not used by this driver.</DD>
-
-<DT>
-<TT>stratum <I>number</I></TT></DT>
-
-<DD>
-Specifies the driver stratum, in decimal from 0 to 15, with default 0.</DD>
-
-<DT>
-<TT>refid <I>string</I></TT></DT>
-
-<DD>
-Specifies the driver reference identifier, an ASCII string from one to
-four characters, with default <TT>WWV</TT>.</DD>
-
-<DT>
-<TT>flag1 0 | 1</TT></DT>
-
-<DD>
-Not used by this driver.</DD>
-
-<DT>
-<TT>flag2 0 | 1</TT></DT>
-
-<DD>
-Not used by this driver.</DD>
-
-<DT>
-<TT>flag3 0 | 1</TT></DT>
-
-<DD>
-Not used by this driver.</DD>
-
-<DT>
-<TT>flag4 0 | 1</TT></DT>
-
-<DD>
-Not used by this driver.</DD>
-</DL>
-Additional Information
-
-<P><A HREF="refclock.htm">Reference Clock Drivers</A>&nbsp;
-<HR>
-<ADDRESS>
-David L. Mills (mills@udel.edu)</ADDRESS>
-
-</BODY>
-</HTML>