diff options
Diffstat (limited to 'contrib/ntp/html/audio.htm')
-rw-r--r-- | contrib/ntp/html/audio.htm | 187 |
1 files changed, 0 insertions, 187 deletions
diff --git a/contrib/ntp/html/audio.htm b/contrib/ntp/html/audio.htm deleted file mode 100644 index b345bc7..0000000 --- a/contrib/ntp/html/audio.htm +++ /dev/null @@ -1,187 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"> -<html> -<head> -<meta name="generator" content="HTML Tidy, see www.w3.org"> -<title>Reference Clock Audio Drivers</title> -</head> -<body> -<h3>Reference Clock Audio Drivers</h3> - -<img align="left" src="pic/radio2.jpg" alt="gif"> - -<p>Make a little noise here.<br clear="left"> -</p> - -<hr> -<p>There are some applications in which the computer time can be -disciplined to an audio signal, rather than a serial timecode and -communications port or special purpose bus peripheral. This is -useful in such cases where the audio signal is sent over a -telephone circuit, for example, or received directly from a -shortwave receiver. In such cases the audio signal can be connected -via an ordinary sound card or baseboard audio codec. The suite of -NTP reference clock drivers currently includes three drivers -suitable for these applications. They include a driver for the -Inter Range Instrumentation Group (IRIG) signals produced by most -radio clocks and timing devices, another for the Canadian -time/frequency radio station CHU and a third for the NIST -time/frequency radio stations WWV and WWVH. The radio drivers are -designed to work with ordinary inexpensive shortwave radios and may -be one of the least expensive ways to build a good primary time -server.</p> - -<p>All three drivers make ample use of sophisticated digital signal -processing algorithms designed to efficiently extract timing -signals from noise and interference. The radio station drivers in -particular implement optimum linear demodulation and decoding -techniques, including maximum likelihood and soft-decision methods. -The documentation page for each driver contains an in-depth -discussion on the algorithms and performance expectations. In some -cases the algorithms are further analyzed, modelled and evaluated -in a technical report.</p> - -<p>Currently, the audio drivers are compatible with Sun operating -systems, including Solaris and SunOS, and the native audio codec -interface supported by these systems. In fact, the interface is -quite generic and support for other systems, in particular the -various Unix generics, should not be difficult. Volunteers are -solicited.</p> - -<p>The audio drivers include a number of common features designed -to groom input signals, suppress spikes and normalize signal -levels. An automatic gain control (AGC) feature provides protection -against overdriven or underdriven input signals. It is designed to -maintain adequate demodulator signal amplitude while avoiding -occasional noise spikes. In order to assure reliable operation, the -signal level must be in the range where the audio gain control is -effective. In general, this means the input signal level must be -such as to cause the AGC to set the gain somewhere in the middle of -the range from 0 to 255, as indicated in the timecode displayed by -the <tt>ntpq</tt> program.</p> - -<p>The drivers operate by disciplining a logical clock based on the -codec sample clock to the audio signal as received. This is done by -stuffing or slipping samples as required to maintain exact -frequency to the order of 0.1 PPM. In order for the driver to -reliably lock on the audio signal, the sample clock frequency -tolerance must be less than 250 PPM (.025 percent) for the IRIG -driver and half that for the radio drivers. The largest error -observed so far is about 60 PPM, but it is possible some sound -cards or codecs may exceed that value.</p> - -<p>The drivers include provisions to select the input port and to -monitor the input signal. The <tt>fudge flag 2</tt> selects the -microphone port if set to zero or the line-in port if set to one. -It does not seem useful to specify the compact disc player port. -The <tt>fudge flag 3</tt> enables the input signal monitor using -the previously selected output port and output gain. Both of these -flags can be set in the configuration file or remotely using the -<tt>ntpdc</tt> utility program.</p> - -<h4>Shortwave Radio Drivers</h4> - -<p>The WWV/H and CHU audio drivers require an external shortwave -radio with the radio output - speaker or headphone jack - connected -to either the microphone or line-in port on the computer. There is -some degree of art in setting up the radio and antenna and getting -the setup to work. While the drivers are highly sophisticated and -efficient in extracting timing signals from noise and interference, -it always helps to have as clear a signal as possible.</p> - -<p>The most important factor affecting the radio signal is the -antenna. It need not be long - even 15 feet is enough if it is -located outside of a metal frame building, preferably on the roof, -and away from metallic objects. An ordinary CB whip mounted on a -PVC pipe and wooden X-frame on the roof should work well with most -portable radios, as they are optimized for small antennas.</p> - -<p>The radio need not be located near the computer; in fact, it -generally works better if the radio is outside the near field of -computers and other electromagnetic noisemakers. It can be in the -elevator penthouse connected by house wiring, which can also be -used to power the radio. A couple of center-tapped audio -transformers will minimize noise pickup and provide phantom power -to the radio with return via the AC neutral wire.</p> - -<p>The WWV/H and CHU transmitters operate on several frequencies -simultaneously, so that in most parts of North America at least one -frequency supports propagation to the receiver location at any -given hour. While both drivers support the ICOM CI-V radio -interface and can tune the radio automatically, computer-tunable -radios are expensive and probably not cost effective compared to a -GPS receiver. So, the radio frequency must usually be fixed and -chosen by compromise.</p> - -<p>Shortwave (3-30 MHz) radio propagation phenomena are well known -to shortwave enthusiasts. The phenomena generally obey the -following rules:</p> - -<ul> -<li>The optimum frequency is higher in daytime than nighttime, -stays high longer on summer days and low longer on winter -nights.</li> - -<li>Transitions between daytime and nightime conditions generally -occur somewhat after sunrise and sunset at the midpoint of the path -from transmitter to receiver.</li> - -<li>Ambient noise (static) on the lower frequencies follows the -thunderstorm season, so is higher on summer afternoons and -evenings.</li> - -<li>The lower frequency bands are best for shorter distances, while -the higher bands are best for longer distances.</li> - -<li>The optimum frequencies are higher at the peak of the 11-year -sunspot cycle and lower at the trough. The current sunspot cycle -should peak in the first couple of years beginning the -century.</li> -</ul> - -The best way to choose a frequency is to listen at various times -over the day and determine the best highest (daytime) and lowest -(nighttime) frequencies. Then, assuming one is available, choose -the highest frequency between these frequencies. This strategy -assumes that the high frequency is more problematic than the low, -that the low frequency probably comes with severe multipath and -static, and insures that probably twice a day the chosen frequency -will work. For instance, on the east coast the best compromise CHU -frequency is probably 7335 kHz and the best WWV frequency is -probably 15 MHz. - -<h4>Debugging Aids</h4> - -<p>The audio drivers include extensive debugging support to help -hook up the audio signals and monitor the driver operations. The -documentation page for each driver describes the various messages -that can be produced either in real-time or written to the <tt> -clockstats</tt> file for later analysis. Of particular help in -verifying signal connections and compatibility is a provision to -monitor the signal via headphones or speaker.</p> - -<p>The drivers write a synthesized timecode to the <tt> -clockstats</tt> file each time the clock is set or verified and at -other times if verbose monitoring is enabled. The format includes -several fixed-length fields defining the Gregorian time to the -millisecond, together with additional variable-length fields -specific to each driver. The data include the intervals since the -clock was last set or verified, the audio gain and various state -variables and counters specific to each driver.</p> - -<h4>Additional Information</h4> - -<a href="refclock.htm">Reference Clock Drivers</a> <br> -<a href="driver7.htm">Radio CHU Audio Demodulator/Decoder</a> <br> -<a href="driver36.htm">Radio WWV/H Audio Demodulator/Decoder</a> -<br> -<a href="driver6.htm">IRIG Audio Decoder</a> - -<hr> -<a href="index.htm"><img align="left" src="pic/home.gif" alt= -"gif"></a> - -<address><a href="mailto:mills@udel.edu">David L. Mills -<mills@udel.edu></a></address> -</body> -</html> - |