diff options
Diffstat (limited to 'contrib/netbsd-tests/net/mpls')
| -rwxr-xr-x | contrib/netbsd-tests/net/mpls/t_ldp_regen.sh | 178 | ||||
| -rwxr-xr-x | contrib/netbsd-tests/net/mpls/t_mpls_fw.sh | 188 | ||||
| -rwxr-xr-x | contrib/netbsd-tests/net/mpls/t_rfc4182.sh | 165 |
3 files changed, 531 insertions, 0 deletions
diff --git a/contrib/netbsd-tests/net/mpls/t_ldp_regen.sh b/contrib/netbsd-tests/net/mpls/t_ldp_regen.sh new file mode 100755 index 0000000..65fc29f --- /dev/null +++ b/contrib/netbsd-tests/net/mpls/t_ldp_regen.sh @@ -0,0 +1,178 @@ +# $NetBSD: t_ldp_regen.sh,v 1.4 2014/09/01 06:38:35 gson Exp $ +# +# Copyright (c) 2013 The NetBSD Foundation, Inc. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# +# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS +# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED +# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS +# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +# IP/MPLS & LDP label reallocation test +# Create 4 routers connected like this: R1--R2--R3--R4-- +# The goal is to push packets from R1 to the R4 shmif1 (the right one) interface +# Enable MPLS forwarding on R2 +# Disable IP forwarding and enable MPLS forwarding on R3 +# Start ldpd and wait for adjancencies to come up +# Add an alias on shmif1 on R4 for which we already have a route on R3 +# Now: * R4 should install label IMPLNULL for that prefix +# * R3 should realloc the target label from IMPLNULL to something else + + +RUMP_SERVER1=unix://./r1 +RUMP_SERVER2=unix://./r2 +RUMP_SERVER3=unix://./r3 +RUMP_SERVER4=unix://./r4 + +RUMP_LIBS="-lrumpnet -lrumpnet_net -lrumpnet_netmpls -lrumpnet_netinet -lrumpnet_netinet6 -lrumpnet_shmif" +LDP_FLAGS="" + +atf_test_case ldp_regen cleanup +ldp_regen_head() { + + atf_set "descr" "IP/MPLS and LDP label regeneration test" + atf_set "require.progs" "rump_server" + atf_set "use.fs" "true" +} + +newaddr_and_ping() { + + # Add new address on R4 + RUMP_SERVER=${RUMP_SERVER4} atf_check -s exit:0 \ + rump.ifconfig shmif1 10.0.5.1/24 alias + + # Now ldpd on R5 should take notice of the new route and announce it + # to R4's ldpd. ldpd on R4 should verify that the next hop + # corresponds to its routing table and change its tag entry + RUMP_SERVER=${RUMP_SERVER1} atf_check -s exit:0 -o ignore -e ignore \ + rump.ping -n -o -w 5 10.0.5.1 +} + +create_servers() { + + # allows us to run as normal user + ulimit -r 400 + + atf_check -s exit:0 rump_server ${RUMP_LIBS} ${RUMP_SERVER1} + atf_check -s exit:0 rump_server ${RUMP_LIBS} ${RUMP_SERVER2} + atf_check -s exit:0 rump_server ${RUMP_LIBS} ${RUMP_SERVER3} + atf_check -s exit:0 rump_server ${RUMP_LIBS} ${RUMP_SERVER4} + + # LDP HIJACK + export RUMPHIJACK=path=/rump,socket=all,sysctl=yes + export LD_PRELOAD=/usr/lib/librumphijack.so + + # Setup first server + export RUMP_SERVER=${RUMP_SERVER1} + atf_check -s exit:0 rump.ifconfig shmif0 create + atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom1 + atf_check -s exit:0 rump.ifconfig shmif0 10.0.1.1/24 + atf_check -s exit:0 rump.ifconfig mpls0 create up + atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0 + atf_check -s exit:0 rump.route -q add 10.0.4.0/24 10.0.1.2 + atf_check -s exit:0 rump.route -q add 10.0.5.0/24 10.0.1.2 + atf_check -s exit:0 /usr/sbin/ldpd ${LDP_FLAGS} + + # Setup second server + export RUMP_SERVER=${RUMP_SERVER2} + atf_check -s exit:0 rump.ifconfig shmif0 create + atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom1 + atf_check -s exit:0 rump.ifconfig shmif0 10.0.1.2/24 + atf_check -s exit:0 rump.ifconfig shmif1 create + atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom2 + atf_check -s exit:0 rump.ifconfig shmif1 10.0.2.1/24 + atf_check -s exit:0 rump.ifconfig mpls0 create up + atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1 + atf_check -s exit:0 rump.sysctl -q -w net.mpls.forwarding=1 + # This one should still do ip forwarding because it announces IMPLNULL + # for the 10.0.1.0/24 subnet + atf_check -s exit:0 rump.route -q add 10.0.4.0/24 10.0.2.2 + atf_check -s exit:0 rump.route -q add 10.0.5.0/24 10.0.2.2 + atf_check -s exit:0 /usr/sbin/ldpd ${LDP_FLAGS} + + # Setup third server + export RUMP_SERVER=${RUMP_SERVER3} + atf_check -s exit:0 rump.ifconfig shmif0 create + atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom2 + atf_check -s exit:0 rump.ifconfig shmif0 10.0.2.2/24 + atf_check -s exit:0 rump.ifconfig shmif1 create + atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom3 + atf_check -s exit:0 rump.ifconfig shmif1 10.0.3.1/24 + atf_check -s exit:0 rump.ifconfig mpls0 create up + atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1 + atf_check -s exit:0 rump.sysctl -q -w net.mpls.forwarding=1 + atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0 + atf_check -s exit:0 rump.route -q add 10.0.1.0/24 10.0.2.1 + atf_check -s exit:0 rump.route -q add 10.0.4.0/24 10.0.3.2 + atf_check -s exit:0 rump.route -q add 10.0.5.0/24 10.0.3.2 + atf_check -s exit:0 /usr/sbin/ldpd ${LDP_FLAGS} + + # Setup fourth server + export RUMP_SERVER=${RUMP_SERVER4} + atf_check -s exit:0 rump.ifconfig shmif0 create + atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom3 + atf_check -s exit:0 rump.ifconfig shmif0 10.0.3.2/24 + atf_check -s exit:0 rump.ifconfig shmif1 create + atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom4 + atf_check -s exit:0 rump.ifconfig shmif1 10.0.4.1/24 + atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0 + atf_check -s exit:0 rump.ifconfig mpls0 create up + atf_check -s exit:0 rump.route -q add 10.0.1.0/24 10.0.3.1 + atf_check -s exit:0 /usr/sbin/ldpd ${LDP_FLAGS} + + unset RUMP_SERVER + unset LD_PRELOAD + unset RUMPHIJACK +} + +wait_ldp_ok() { + + RUMP_SERVER=${RUMP_SERVER1} atf_check -s exit:0 -o ignore -e ignore \ + rump.ping -o -w 60 10.0.4.1 +} + +docleanup() { + + RUMP_SERVER=${RUMP_SERVER1} rump.halt + RUMP_SERVER=${RUMP_SERVER2} rump.halt + RUMP_SERVER=${RUMP_SERVER3} rump.halt + RUMP_SERVER=${RUMP_SERVER4} rump.halt +} + +ldp_regen_body() { + + if sysctl machdep.cpu_brand | grep QEMU >/dev/null 2>&1 + then + atf_skip "unreliable under qemu, skip until PR kern/43997 fixed" + fi + create_servers + wait_ldp_ok + newaddr_and_ping +} + +ldp_regen_cleanup() { + + docleanup +} + +atf_init_test_cases() { + + atf_add_test_case ldp_regen +} diff --git a/contrib/netbsd-tests/net/mpls/t_mpls_fw.sh b/contrib/netbsd-tests/net/mpls/t_mpls_fw.sh new file mode 100755 index 0000000..ddd42df --- /dev/null +++ b/contrib/netbsd-tests/net/mpls/t_mpls_fw.sh @@ -0,0 +1,188 @@ +# $NetBSD: t_mpls_fw.sh,v 1.4 2014/03/18 18:20:44 riastradh Exp $ +# +# Copyright (c) 2013 The NetBSD Foundation, Inc. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# +# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS +# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED +# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS +# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +# TEST MPLS encap/decap and forwarding using INET as encapsulated protocol +# Setup four routers connected like this: R1---R2---R3---R4-- +# Goal is to be able to ping from R1 the outermost interface of R4 +# Disable net.inet.ip.forwarding, enable net.mpls.forwarding +# Add route on R1 in order to encapsulate into MPLS the IP packets with +# destination equal to R4 right hand side interface +# Add MPLS routes on R2 in order to forward frames belonging to that FEC to R3 +# Add MPLS "POP" route on R3 for that FEC, pointing to R4 +# Do the same for the reverse direction (R4 to R1) +# ping from R1 to R4 right hand side interface + + +RUMP_SERVER1=unix://./r1 +RUMP_SERVER2=unix://./r2 +RUMP_SERVER3=unix://./r3 +RUMP_SERVER4=unix://./r4 + +RUMP_FLAGS=\ +"-lrumpnet -lrumpnet_net -lrumpnet_netmpls -lrumpnet_netinet -lrumpnet_shmif" + +atf_test_case mplsfw4 cleanup +mplsfw4_head() +{ + + atf_set "descr" "IP/MPLS forwarding test using PHP" + atf_set "require.progs" "rump_server" +} + +startservers() +{ + + ulimit -r 300 + atf_check -s exit:0 rump_server ${RUMP_FLAGS} ${RUMP_SERVER1} + atf_check -s exit:0 rump_server ${RUMP_FLAGS} ${RUMP_SERVER2} + atf_check -s exit:0 rump_server ${RUMP_FLAGS} ${RUMP_SERVER3} + atf_check -s exit:0 rump_server ${RUMP_FLAGS} ${RUMP_SERVER4} +} + +configservers() +{ + + # Setup the first server + export RUMP_SERVER=${RUMP_SERVER1} + atf_check -s exit:0 rump.ifconfig shmif0 create + atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom1 + atf_check -s exit:0 rump.ifconfig shmif0 10.0.1.1/24 + atf_check -s exit:0 rump.ifconfig mpls0 create up + atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1 + atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0 + atf_check -s exit:0 rump.route -q add 10.0.4.0/24 -ifa 10.0.1.1 \ + -ifp mpls0 -tag 25 -inet 10.0.1.2 + + # Setup the second server + export RUMP_SERVER=${RUMP_SERVER2} + atf_check -s exit:0 rump.ifconfig shmif0 create + atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom1 + atf_check -s exit:0 rump.ifconfig shmif0 10.0.1.2/24 + atf_check -s exit:0 rump.ifconfig shmif1 create + atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom2 + atf_check -s exit:0 rump.ifconfig shmif1 10.0.2.1/24 + atf_check -s exit:0 rump.ifconfig mpls0 create up + atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1 + atf_check -s exit:0 rump.sysctl -q -w net.mpls.forwarding=1 + atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0 + atf_check -s exit:0 rump.route -q add -mpls 25 -tag 30 -inet 10.0.2.2 + atf_check -s exit:0 rump.route -q add -mpls 27 -tag ${1} -inet 10.0.1.1 + + # Setup the third server + export RUMP_SERVER=${RUMP_SERVER3} + atf_check -s exit:0 rump.ifconfig shmif0 create + atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom2 + atf_check -s exit:0 rump.ifconfig shmif0 10.0.2.2/24 + atf_check -s exit:0 rump.ifconfig shmif1 create + atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom3 + atf_check -s exit:0 rump.ifconfig shmif1 10.0.3.1/24 + atf_check -s exit:0 rump.ifconfig mpls0 create up + atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1 + atf_check -s exit:0 rump.sysctl -q -w net.mpls.forwarding=1 + atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0 + atf_check -s exit:0 rump.route -q add -mpls 30 -tag ${1} -inet 10.0.3.2 + atf_check -s exit:0 rump.route -q add -mpls 26 -tag 27 -inet 10.0.2.1 + + # Setup the fourth server + export RUMP_SERVER=${RUMP_SERVER4} + atf_check -s exit:0 rump.ifconfig shmif0 create + atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom3 + atf_check -s exit:0 rump.ifconfig shmif0 10.0.3.2/24 + atf_check -s exit:0 rump.ifconfig shmif1 create + atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom4 + atf_check -s exit:0 rump.ifconfig shmif1 10.0.4.1/24 + atf_check -s exit:0 rump.ifconfig mpls0 create up + atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1 + atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0 + atf_check -s exit:0 rump.route -q add 10.0.1.0/24 -ifa 10.0.3.2 \ + -ifp mpls0 -tag 26 -inet 10.0.3.1 + + unset RUMP_SERVER +} + +doping() +{ + + export RUMP_SERVER=${RUMP_SERVER1} + atf_check -s exit:0 -o match:"64 bytes from 10.0.4.1: icmp_seq=" \ + rump.ping -n -o -w 5 10.0.4.1 + unset RUMP_SERVER +} + +docleanup() +{ + + RUMP_SERVER=${RUMP_SERVER1} rump.halt + RUMP_SERVER=${RUMP_SERVER2} rump.halt + RUMP_SERVER=${RUMP_SERVER3} rump.halt + RUMP_SERVER=${RUMP_SERVER4} rump.halt +} + +mplsfw4_body() +{ + + startservers + configservers 3 + doping +} + +mplsfw4_cleanup() +{ + + docleanup +} + + +atf_test_case mplsfw4_expl cleanup +mplsfw4_expl_head() +{ + + atf_set "descr" "IP/MPLS forwarding test using explicit NULL labels" + atf_set "require.progs" "rump_server" +} + +mplsfw4_expl_body() +{ + + startservers + configservers 0 + doping +} + +mplsfw4_expl_cleanup() +{ + + docleanup +} + + +atf_init_test_cases() +{ + + atf_add_test_case mplsfw4 + atf_add_test_case mplsfw4_expl +} diff --git a/contrib/netbsd-tests/net/mpls/t_rfc4182.sh b/contrib/netbsd-tests/net/mpls/t_rfc4182.sh new file mode 100755 index 0000000..8c166f9 --- /dev/null +++ b/contrib/netbsd-tests/net/mpls/t_rfc4182.sh @@ -0,0 +1,165 @@ +# $NetBSD: t_rfc4182.sh,v 1.3 2014/03/18 18:20:44 riastradh Exp $ +# +# Copyright (c) 2013 The NetBSD Foundation, Inc. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# +# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS +# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED +# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS +# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +# TEST RFC 4182 +# Setup four routers connected like this: R1---R2---R3---R4-- +# Goal is to be able to ping from R1 the outermost interface of R4 +# Disable net.inet.ip.forwarding, enable net.mpls.forwarding +# Add route on R1 in order to encapsulate into MPLS the IP packets with +# destination equal to R4 right hand side interface. Use two labels here: +# 25 and IPv6 Explicit NULL +# Add a double tagged MPLS route on R2 in order to forward frames belonging to +# that FEC to R3, with IPv4 NULL being the most outermost one +# Add MPLS "POP" route on R3 for that FEC, pointing to R4 +# Do the same for the reverse direction (R4 to R1) +# ping from R1 to R4 right hand side interface + + +RUMP_SERVER1=unix://./r1 +RUMP_SERVER2=unix://./r2 +RUMP_SERVER3=unix://./r3 +RUMP_SERVER4=unix://./r4 + +RUMP_FLAGS=\ +"-lrumpnet -lrumpnet_net -lrumpnet_netmpls -lrumpnet_netinet -lrumpnet_shmif" + +atf_test_case rfc4182 cleanup +rfc4182_head() +{ + + atf_set "descr" "RFC 4182 conformance test" + atf_set "require.progs" "rump_server" +} + +startservers() +{ + + ulimit -r 300 + atf_check -s exit:0 rump_server ${RUMP_FLAGS} ${RUMP_SERVER1} + atf_check -s exit:0 rump_server ${RUMP_FLAGS} ${RUMP_SERVER2} + atf_check -s exit:0 rump_server ${RUMP_FLAGS} ${RUMP_SERVER3} + atf_check -s exit:0 rump_server ${RUMP_FLAGS} ${RUMP_SERVER4} +} + +configservers() +{ + + # Setup the first server + export RUMP_SERVER=${RUMP_SERVER1} + atf_check -s exit:0 rump.ifconfig shmif0 create + atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom1 + atf_check -s exit:0 rump.ifconfig shmif0 10.0.1.1/24 + atf_check -s exit:0 rump.ifconfig mpls0 create up + atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1 + atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0 + atf_check -s exit:0 rump.route -q add 10.0.4.0/24 -ifa 10.0.1.1 \ + -ifp mpls0 -tag 25,2 -inet 10.0.1.2 + + # Setup the second server + export RUMP_SERVER=${RUMP_SERVER2} + atf_check -s exit:0 rump.ifconfig shmif0 create + atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom1 + atf_check -s exit:0 rump.ifconfig shmif0 10.0.1.2/24 + atf_check -s exit:0 rump.ifconfig shmif1 create + atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom2 + atf_check -s exit:0 rump.ifconfig shmif1 10.0.2.1/24 + atf_check -s exit:0 rump.ifconfig mpls0 create up + atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1 + atf_check -s exit:0 rump.sysctl -q -w net.mpls.forwarding=1 + atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0 + atf_check -s exit:0 rump.route -q add -mpls 25 -tag 30,0 -inet 10.0.2.2 + atf_check -s exit:0 rump.route -q add -mpls 27 -tag 3 -inet 10.0.1.1 + + # Setup the third server + export RUMP_SERVER=${RUMP_SERVER3} + atf_check -s exit:0 rump.ifconfig shmif0 create + atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom2 + atf_check -s exit:0 rump.ifconfig shmif0 10.0.2.2/24 + atf_check -s exit:0 rump.ifconfig shmif1 create + atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom3 + atf_check -s exit:0 rump.ifconfig shmif1 10.0.3.1/24 + atf_check -s exit:0 rump.ifconfig mpls0 create up + atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1 + atf_check -s exit:0 rump.sysctl -q -w net.mpls.forwarding=1 + atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0 + atf_check -s exit:0 rump.route -q add -mpls 30 -tag 3 -inet 10.0.3.2 + atf_check -s exit:0 rump.route -q add -mpls 26 -tag 27,0 -inet 10.0.2.1 + + # Setup the fourth server + export RUMP_SERVER=${RUMP_SERVER4} + atf_check -s exit:0 rump.ifconfig shmif0 create + atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom3 + atf_check -s exit:0 rump.ifconfig shmif0 10.0.3.2/24 + atf_check -s exit:0 rump.ifconfig shmif1 create + atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom4 + atf_check -s exit:0 rump.ifconfig shmif1 10.0.4.1/24 + atf_check -s exit:0 rump.ifconfig mpls0 create up + atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1 + atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0 + atf_check -s exit:0 rump.route -q add 10.0.1.0/24 -ifa 10.0.3.2 \ + -ifp mpls0 -tag 26 -inet 10.0.3.1 + + unset RUMP_SERVER +} + +doping() +{ + + export RUMP_SERVER=${RUMP_SERVER1} + atf_check -s exit:0 -o match:"64 bytes from 10.0.4.1: icmp_seq=" \ + rump.ping -n -o -w 5 10.0.4.1 + unset RUMP_SERVER +} + +docleanup() +{ + + RUMP_SERVER=${RUMP_SERVER1} rump.halt + RUMP_SERVER=${RUMP_SERVER2} rump.halt + RUMP_SERVER=${RUMP_SERVER3} rump.halt + RUMP_SERVER=${RUMP_SERVER4} rump.halt +} + +rfc4182_body() +{ + + startservers + configservers + doping +} + +rfc4182_cleanup() +{ + + docleanup +} + +atf_init_test_cases() +{ + + atf_add_test_case rfc4182 +} |
