diff options
Diffstat (limited to 'contrib/netbsd-tests/bin/sh/t_arith.sh')
| -rwxr-xr-x | contrib/netbsd-tests/bin/sh/t_arith.sh | 1035 |
1 files changed, 1035 insertions, 0 deletions
diff --git a/contrib/netbsd-tests/bin/sh/t_arith.sh b/contrib/netbsd-tests/bin/sh/t_arith.sh new file mode 100755 index 0000000..d7b5083 --- /dev/null +++ b/contrib/netbsd-tests/bin/sh/t_arith.sh @@ -0,0 +1,1035 @@ +# $NetBSD: t_arith.sh,v 1.5 2016/05/12 14:25:11 kre Exp $ +# +# Copyright (c) 2016 The NetBSD Foundation, Inc. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# +# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS +# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED +# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS +# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +# the implementation of "sh" to test +: ${TEST_SH:="/bin/sh"} + +# Requirement is to support at least "signed long" whatever that means +# (number of bits in "long" is not specified - but should be at least 32). + +# These tests use -o inline:"..." rather than -o match:'...' as we have +# only digits to examine, and it is good to be sure that 1 + 1 really gives 2 +# and that 42 or 123 don't look like success because there is a 2 in them. + +ARITH_BITS='?' +discover_range() +{ + # cannot use arithmetic "test" operators, range of test in + # ATF_SHELL (or even TEST_SH) might not be as big as that + # supported by $(( )) in TEST_SH + + if ! ${TEST_SH} -c ': $(( 0x10000 ))' 2>/dev/null + then + # 16 bits or less, or hex unsupported, just give up... + return + fi + test $( ${TEST_SH} -c 'echo $(( 0x1FFFF ))' ) = 131071 || return + + # when attempting to exceed the number of available bits + # the shell may react in any of 3 (rational) ways + # 1. syntax error (maybe even core dump...) and fail + # 2. represent a positive number input as negative value + # 3. keep the number positive, but not the value expected + # (perhaps pegged at the max possible value) + # any of those may be accompanied by a message to stderr + + # Must check all 3 possibilities for each plausible size + # Tests do not use 0x8000... because that value can have weird + # other side effects that are not relevant to discover here. + # But we do want to try and force the sign bit set. + + if ! ${TEST_SH} -c ': $(( 0xC0000000 ))' 2>/dev/null + then + # proobably shell detected overflow and complained + ARITH_BITS=32 + return + fi + if ${TEST_SH} 2>/dev/null \ + -c 'case $(( 0xC0000000 )); in (-*) exit 0;; esac; exit 1' + then + ARITH_BITS=32 + return + fi + if ${TEST_SH} -c '[ $(( 0xC0000000 )) != 3221225472 ]' 2>/dev/null + then + ARITH_BITS=32 + return + fi + + if ! ${TEST_SH} -c ': $(( 0xC000000000000000 ))' 2>/dev/null + then + ARITH_BITS=64 + return + fi + if ${TEST_SH} 2>/dev/null \ + -c 'case $(( 0xC000000000000000 )); in (-*) exit 0;; esac; exit 1' + then + ARITH_BITS=64 + return + fi + if ${TEST_SH} 2>/dev/null \ + -c '[ $((0xC000000000000000)) != 13835058055282163712 ]' + then + ARITH_BITS=64 + return + fi + + if ${TEST_SH} 2>/dev/null -c \ + '[ $((0x123456781234567812345678)) = 5634002657842756053938493048 ]' + then + # just assume... (for now anyway, revisit when it happens...) + ARITH_BITS=96 + return + fi +} + +atf_test_case constants +constants_head() +{ + atf_set "descr" "Tests that arithmetic expansion can handle constants" +} +constants_body() +{ + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $((0x0))' + + # atf_expect_fail "PR bin/50959" + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $((0X0))' + # atf_expect_pass + + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $((000))' + + atf_check -s exit:0 -o inline:'1\n' -e empty \ + ${TEST_SH} -c 'echo $(( 000000001 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty \ + ${TEST_SH} -c 'echo $(( 0x000000 ))' + + atf_check -s exit:0 -o inline:'99999\n' -e empty \ + ${TEST_SH} -c 'echo $((99999))' + + [ ${ARITH_BITS} -gt 44 ] && + atf_check -s exit:0 -o inline:'9191919191919\n' -e empty \ + ${TEST_SH} -c 'echo $((9191919191919))' + + atf_check -s exit:0 -o inline:'13\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0xD ))' + atf_check -s exit:0 -o inline:'11\n' -e empty ${TEST_SH} -c \ + 'echo $(( 013 ))' + atf_check -s exit:0 -o inline:'7\n' -e empty ${TEST_SH} -c \ + 'x=7;echo $(($x))' + atf_check -s exit:0 -o inline:'9\n' -e empty ${TEST_SH} -c \ + 'x=9;echo $((x))' + + atf_check -s exit:0 -o inline:'11\n' -e empty \ + ${TEST_SH} -c 'x=0xB; echo $(( $x ))' + atf_check -s exit:0 -o inline:'27\n' -e empty \ + ${TEST_SH} -c 'x=0X1B; echo $(( x ))' + atf_check -s exit:0 -o inline:'27\n' -e empty \ + ${TEST_SH} -c 'X=033; echo $(( $X ))' + atf_check -s exit:0 -o inline:'219\n' -e empty \ + ${TEST_SH} -c 'X=0333; echo $(( X ))' + atf_check -s exit:0 -o inline:'0\n' -e empty \ + ${TEST_SH} -c 'NULL=; echo $(( NULL ))' + + # Not clear if this is 0, nothing, or an error, so omit for now + # atf_check -s exit:0 -o inline:'0\n' -e empty \ + # ${TEST_SH} -c 'echo $(( ))' + + # not clear whether this should return 0 or an error, so omit for now + # atf_check -s exit:0 -o inline:'0\n' -e empty \ + # ${TEST_SH} -c 'echo $(( UNDEFINED_VAR ))' +} + + +atf_test_case do_unary_plus +do_unary_plus_head() +{ + atf_set "descr" "Tests that unary plus works as expected" +} +do_unary_plus_body() +{ + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( +0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( +1 ))' + atf_check -s exit:0 -o inline:'6\n' -e empty ${TEST_SH} -c \ + 'echo $(( + 6 ))' + atf_check -s exit:0 -o inline:'4321\n' -e empty ${TEST_SH} -c \ + 'echo $(( + 4321 ))' + atf_check -s exit:0 -o inline:'17185\n' -e empty ${TEST_SH} -c \ + 'echo $(( + 0x4321 ))' +} + +atf_test_case do_unary_minus +do_unary_minus_head() +{ + atf_set "descr" "Tests that unary minus works as expected" +} +do_unary_minus_body() +{ + atf_check -s exit:0 -o inline:'-1\n' -e empty ${TEST_SH} -c \ + 'echo $(( -1 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( - 0 ))' + atf_check -s exit:0 -o inline:'-1\n' -e empty ${TEST_SH} -c \ + 'echo $(( - 1 ))' + atf_check -s exit:0 -o inline:'-6\n' -e empty ${TEST_SH} -c \ + 'echo $(( - 6 ))' + atf_check -s exit:0 -o inline:'-4321\n' -e empty ${TEST_SH} -c \ + 'echo $(( - 4321 ))' + atf_check -s exit:0 -o inline:'-2257\n' -e empty ${TEST_SH} -c \ + 'echo $(( - 04321 ))' + atf_check -s exit:0 -o inline:'-7\n' -e empty ${TEST_SH} -c \ + 'echo $((-7))' +} + +atf_test_case do_unary_not +do_unary_not_head() +{ + atf_set "descr" "Tests that unary not (boolean) works as expected" +} +do_unary_not_body() +{ + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( ! 1 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( ! 0 ))' + + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( !1234 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( !0xFFFF ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( ! 000000 ))' +} + +atf_test_case do_unary_tilde +do_unary_tilde_head() +{ + atf_set "descr" "Tests that unary not (bitwise) works as expected" +} +do_unary_tilde_body() +{ + # definitely 2's complement arithmetic here... + + atf_check -s exit:0 -o inline:'-1\n' -e empty ${TEST_SH} -c \ + 'echo $(( ~ 0 ))' + atf_check -s exit:0 -o inline:'-2\n' -e empty ${TEST_SH} -c \ + 'echo $(( ~ 1 ))' + + atf_check -s exit:0 -o inline:'-1235\n' -e empty ${TEST_SH} -c \ + 'echo $(( ~1234 ))' + atf_check -s exit:0 -o inline:'-256\n' -e empty ${TEST_SH} -c \ + 'echo $(( ~0xFF ))' +} + +atf_test_case elementary_add +elementary_add_head() +{ + atf_set "descr" "Tests that simple addition works as expected" +} +elementary_add_body() +{ + # some of these tests actually test unary ops & op precedence... + + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 + 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 + 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 + 1 ))' + atf_check -s exit:0 -o inline:'2\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 + 1 ))' + atf_check -s exit:0 -o inline:'10\n' -e empty ${TEST_SH} -c \ + 'echo $(( 4 + 6 ))' + atf_check -s exit:0 -o inline:'10\n' -e empty ${TEST_SH} -c \ + 'echo $(( 6 + 4 ))' + atf_check -s exit:0 -o inline:'5555\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1234 + 4321 ))' + atf_check -s exit:0 -o inline:'3333\n' -e empty ${TEST_SH} -c \ + 'echo $((1111+2222))' + atf_check -s exit:0 -o inline:'5555\n' -e empty ${TEST_SH} -c \ + 'echo $((+3333+2222))' + atf_check -s exit:0 -o inline:'7777\n' -e empty ${TEST_SH} -c \ + 'echo $((+3333 + +4444))' + atf_check -s exit:0 -o inline:'-7777\n' -e empty ${TEST_SH} -c \ + 'echo -$((+4125+ +3652))' +} + +atf_test_case elementary_sub +elementary_sub_head() +{ + atf_set "descr" "Tests that simple subtraction works as expected" +} +elementary_sub_body() +{ + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 - 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 - 0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 - 1 ))' + atf_check -s exit:0 -o inline:'-1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 - 1 ))' + atf_check -s exit:0 -o inline:'488\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1066 - 578 ))' + atf_check -s exit:0 -o inline:'-3662\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2016-5678 ))' + atf_check -s exit:0 -o inline:'-3662\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2016+-5678 ))' + atf_check -s exit:0 -o inline:'-3662\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2016-+5678 ))' + atf_check -s exit:0 -o inline:'-7694\n' -e empty ${TEST_SH} -c \ + 'echo $(( -2016-5678 ))' + atf_check -s exit:0 -o inline:'--1\n' -e empty ${TEST_SH} -c \ + 'echo -$(( -1018 - -1017 ))' +} + +atf_test_case elementary_mul +elementary_mul_head() +{ + atf_set "descr" "Tests that simple multiplication works as expected" +} +elementary_mul_body() +{ + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 * 0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 * 0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 * 1 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 * 1 ))' + atf_check -s exit:0 -o inline:'-1\n' -e empty ${TEST_SH} -c \ + 'echo $(( -1 * 1 ))' + atf_check -s exit:0 -o inline:'-1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 * -1 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( -1 * -1 ))' + atf_check -s exit:0 -o inline:'391\n' -e empty ${TEST_SH} -c \ + 'echo $(( 17 * 23 ))' + atf_check -s exit:0 -o inline:'169\n' -e empty ${TEST_SH} -c \ + 'echo $(( 13*13 ))' + atf_check -s exit:0 -o inline:'-11264\n' -e empty ${TEST_SH} -c \ + 'echo $(( -11 *1024 ))' + atf_check -s exit:0 -o inline:'-16983\n' -e empty ${TEST_SH} -c \ + 'echo $(( 17* -999 ))' + atf_check -s exit:0 -o inline:'9309\n' -e empty ${TEST_SH} -c \ + 'echo $(( -29*-321 ))' +} + +atf_test_case elementary_div +elementary_div_head() +{ + atf_set "descr" "Tests that simple division works as expected" +} +elementary_div_body() +{ + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 / 1 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 / 1 ))' + test ${ARITH_BITS} -ge 38 && + atf_check -s exit:0 -o inline:'99999999999\n' -e empty \ + ${TEST_SH} -c 'echo $(( 99999999999 / 1 ))' + atf_check -s exit:0 -o inline:'2\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2 / 1 ))' + + atf_check -s exit:0 -o inline:'3\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3 / 1 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3 / 2 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3 / 3 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3 / 4 ))' + + atf_check -s exit:0 -o inline:'173\n' -e empty ${TEST_SH} -c \ + 'echo $(( 123456 / 713 ))' + atf_check -s exit:0 -o inline:'13\n' -e empty ${TEST_SH} -c \ + 'echo $(( 169 / 13 ))' +} + +atf_test_case elementary_rem +elementary_rem_head() +{ + atf_set "descr" "Tests that simple modulus works as expected" +} +elementary_rem_body() +{ + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 % 1 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 % 1 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2 % 1 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 9999 % 1 ))' + + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 % 2 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 % 2 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2 % 2 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0xFFFF % 2 ))' + + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 % 3 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 % 3 ))' + atf_check -s exit:0 -o inline:'2\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2 % 3 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3 % 3 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3123 % 3 ))' + + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 9999 % 2 ))' + + atf_check -s exit:0 -o inline:'107\n' -e empty ${TEST_SH} -c \ + 'echo $(( 123456%173 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $((169%13))' +} + +atf_test_case elementary_shl +elementary_shl_head() +{ + atf_set "descr" "Tests that simple shift left works as expected" +} +elementary_shl_body() +{ + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 << 0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 << 1 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 << 17 ))' + + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 << 0 ))' + atf_check -s exit:0 -o inline:'2\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 << 1 ))' + atf_check -s exit:0 -o inline:'131072\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 << 17 ))' + + atf_check -s exit:0 -o inline:'2021161080\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0x3C3C3C3C << 1 ))' + + test "${ARITH_BITS}" -ge 40 && + atf_check -s exit:0 -o inline:'129354309120\n' -e empty \ + ${TEST_SH} -c 'echo $(( 0x3C3C3C3C << 7 ))' + test "${ARITH_BITS}" -ge 72 && + atf_check -s exit:0 -o inline:'1111145054534149079040\n' \ + -e empty ${TEST_SH} -c 'echo $(( 0x3C3C3C3C << 40 ))' + + return 0 +} + +atf_test_case elementary_shr +elementary_shr_head() +{ + atf_set "descr" "Tests that simple shift right works as expected" +} +elementary_shr_body() +{ + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 >> 0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 >> 1 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 >> 17 ))' + + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 >> 0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 >> 1 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2 >> 1 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3 >> 1 ))' + + atf_check -s exit:0 -o inline:'4\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0x10 >> 2 ))' + atf_check -s exit:0 -o inline:'4\n' -e empty ${TEST_SH} -c \ + 'echo $(( 022 >> 2 ))' + + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 131072 >> 17 ))' + + test ${ARITH_BITS} -ge 40 && + atf_check -s exit:0 -o inline:'8\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0x4000000000 >> 35 ))' + test ${ARITH_BITS} -ge 80 && + atf_check -s exit:0 -o inline:'4464\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0x93400FACE005C871000 >> 64 ))' + + return 0 +} + +atf_test_case elementary_eq +elementary_eq_head() +{ + atf_set "descr" "Tests that simple equality test works as expected" +} +elementary_eq_body() +{ + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 == 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 == 0000 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 == 0x00 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 == 1 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'X=30; Y=0x1E; echo $(( X == Y ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0x1234 == 4660 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0x1234 == 011064 ))' + + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 == 1 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 == 0000000000000001 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 == 0x10000000000000 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 == 2 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'X=3; Y=7; echo $(( X == Y ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1234 == 0x4660 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 01234 == 0x11064 ))' +} +atf_test_case elementary_ne +elementary_ne_head() +{ + atf_set "descr" "Tests that simple inequality test works as expected" +} +elementary_ne_body() +{ + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 != 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0x71 != 17 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1234 != 01234 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0x1234 != 01234 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'X=3; echo $(( X != 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'X=3; Y=0x11; echo $(( X != Y ))' + + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3 != 3 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 != 0x0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0xA != 012 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'X=1; echo $(( X != 1 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'X=0xC; Y=014; echo $(( X != Y ))' +} +atf_test_case elementary_lt +elementary_lt_head() +{ + atf_set "descr" "Tests that simple less than test works as expected" +} +elementary_lt_body() +{ + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 < 1 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( -1 < 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 < 10 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 100 < 101 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0xA1 < 200 ))' + + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 < 0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 < 0 ))' + + test ${ARITH_BITS} -ge 40 && + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0x1BEEFF00D < 0x1FACECAFE ))' + + return 0 +} +atf_test_case elementary_le +elementary_le_head() +{ + atf_set "descr" "Tests that simple less or equal test works as expected" +} +elementary_le_body() +{ + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 <= 1 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( -1 <= 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 <= 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 <= 10 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 100 <= 101 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0xA1 <= 161 ))' + + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 <= 0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( -100 <= -200 ))' + + test ${ARITH_BITS} -ge 40 && + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'cost=; AUD=; echo $(( $cost 0x2FEEDBABE <= $AUD 12866927294 ))' + + return 0 +} +atf_test_case elementary_gt +elementary_gt_head() +{ + atf_set "descr" "Tests that simple greater than works as expected" +} +elementary_gt_body() +{ + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 > 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 > -1 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 11 > 012 ))' + + # atf_expect_fail "PR bin/50959" + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2147483647 > 0X7FFFFF0 ))' + # atf_expect_pass + + test ${ARITH_BITS} -gt 32 && + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0x80000000 > 0x7FFFFFFF ))' + + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 > 0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 > 1 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( -1 > 0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 > 10 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2015 > 2016 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0xA1 > 200 ))' + + test ${ARITH_BITS} -ge 44 && + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0x7F07F07F0 > 34099628014 ))' + + return 0 +} +atf_test_case elementary_ge +elementary_ge_head() +{ + atf_set "descr" "Tests that simple greater or equal works as expected" +} +elementary_ge_body() +{ + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 >= 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 >= 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( -100 >= -101 ))' + + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( -1 >= 0 ))' +} + +atf_test_case fiddle_bits_and +fiddle_bits_and_head() +{ + atf_set "descr" "Test bitwise and operations in arithmetic expressions" +} +fiddle_bits_and_body() +{ + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 & 0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 & 0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 & 1 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 & 1 ))' + + atf_check -s exit:0 -o inline:'255\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0xFF & 0xFF ))' + atf_check -s exit:0 -o inline:'255\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0xFFFF & 0377 ))' + + test "${ARITH_BITS}" -ge 48 && + atf_check -s exit:0 -o inline:'70377641607203\n' -e empty \ + ${TEST_SH} -c 'echo $(( 0x5432FEDC0123 & 0x42871357BAB3 ))' + + return 0 +} +atf_test_case fiddle_bits_or +fiddle_bits_or_head() +{ + atf_set "descr" "Test bitwise or operations in arithmetic expressions" +} +fiddle_bits_or_body() +{ + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 | 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 | 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 | 1 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 | 1 ))' + + atf_check -s exit:0 -o inline:'4369\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0x1111 | 0x1111 ))' + atf_check -s exit:0 -o inline:'255\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0xAA | 0125 ))' + + test "${ARITH_BITS}" -ge 48 && + atf_check -s exit:0 -o inline:'95348271856563\n' -e empty \ + ${TEST_SH} -c 'echo $(( 0x5432FEDC0123 | 0x42871357BAB3 ))' + + return 0 +} +atf_test_case fiddle_bits_xor +fiddle_bits_xor_head() +{ + atf_set "descr" "Test bitwise xor operations in arithmetic expressions" +} +fiddle_bits_xor_body() +{ + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 ^ 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 ^ 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 ^ 1 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 ^ 1 ))' + + atf_check -s exit:0 -o inline:'255\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0xF0 ^ 0x0F ))' + atf_check -s exit:0 -o inline:'15\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0xF0 ^ 0xFF ))' + + test "${ARITH_BITS}" -ge 48 && + atf_check -s exit:0 -o inline:'24970630249360\n' -e empty \ + ${TEST_SH} -c 'echo $(( 0x5432FEDC0123 ^ 0x42871357BAB3 ))' + + return 0 +} + +atf_test_case logical_and +logical_and_head() +{ + atf_set "descr" "Test logical and operations in arithmetic expressions" +} +logical_and_body() +{ + # cannot test short-circuit eval until sh implements side effects... + + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 && 0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 && 0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 && 1 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 && 1 ))' + + # atf_expect_fail "PR bin/50960" + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0x1111 && 01234 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0xFFFF && 0xF0F0 ))' +} +atf_test_case logical_or +logical_or_head() +{ + atf_set "descr" "Test logical or operations in arithmetic expressions" +} +logical_or_body() +{ + # cannot test short-circuit eval until sh implements side effects... + + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 || 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 || 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 || 1 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 || 1 ))' + + # atf_expect_fail "PR bin/50960" + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0x1111 || 01234 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0x33 || 0xF0F0 ))' +} + +atf_test_case make_selection +make_selection_head() +{ + atf_set "descr" "Test ?: operator in arithmetic expressions" +} +make_selection_body() +{ + # atf_expect_fail "PR bin/50958" + + atf_check -s exit:0 -o inline:'3\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0 ? 2 : 3 ))' + atf_check -s exit:0 -o inline:'2\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 ? 2 : 3 ))' + + atf_check -s exit:0 -o inline:'111\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0x1234 ? 111 : 222 ))' + + atf_check -s exit:0 -o inline:'-1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 < 2 ? -1 : 1 > 2 ? 1 : 0 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 < 1 ? -1 : 1 > 1 ? 1 : 0 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2 < 1 ? -1 : 2 > 1 ? 1 : 0 ))' +} + +atf_test_case operator_precedence +operator_precedence_head() +{ + atf_set "descr" "Test operator precedence without parentheses" +} +operator_precedence_body() +{ + # NB: apart from $(( )) ** NO ** parentheses in the expressions. + + atf_check -s exit:0 -o inline:'6\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 + 2 + 3 ))' + atf_check -s exit:0 -o inline:'2\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 - 2 + 3 ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3 - 2 - 1 ))' + atf_check -s exit:0 -o inline:'2\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3 - 2 + 1 ))' + + atf_check -s exit:0 -o inline:'-1\n' -e empty ${TEST_SH} -c \ + 'echo $(( - 2 + 1 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2 + -1 ))' + + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( ! 2 + 1 ))' + atf_check -s exit:0 -o inline:'2\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2 + !1 ))' + + atf_check -s exit:0 -o inline:'8\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3 * 2 + 2 ))' + atf_check -s exit:0 -o inline:'7\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3 + 2 * 2 ))' + atf_check -s exit:0 -o inline:'12\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3 * 2 * 2 ))' + + atf_check -s exit:0 -o inline:'5\n' -e empty ${TEST_SH} -c \ + 'echo $(( 9 / 3 + 2 ))' + atf_check -s exit:0 -o inline:'10\n' -e empty ${TEST_SH} -c \ + 'echo $(( 9 + 3 / 2 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 9 / 3 / 2 ))' + + atf_check -s exit:0 -o inline:'72\n' -e empty ${TEST_SH} -c \ + 'echo $(( 9 << 1 + 2 ))' + atf_check -s exit:0 -o inline:'48\n' -e empty ${TEST_SH} -c \ + 'echo $(( 9 + 3 << 2 ))' + atf_check -s exit:0 -o inline:'288\n' -e empty ${TEST_SH} -c \ + 'echo $(( 9 << 3 << 2 ))' + + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 9 >> 1 + 2 ))' + atf_check -s exit:0 -o inline:'3\n' -e empty ${TEST_SH} -c \ + 'echo $(( 9 + 3 >> 2 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 19 >> 3 >> 1 ))' + + atf_check -s exit:0 -o inline:'4\n' -e empty ${TEST_SH} -c \ + 'echo $(( 19 >> 3 << 1 ))' + atf_check -s exit:0 -o inline:'76\n' -e empty ${TEST_SH} -c \ + 'echo $(( 19 << 3 >> 1 ))' + + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2 + 3 < 3 * 2 ))' + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2 << 3 >= 3 << 2 ))' + + # sh inherits C's crazy operator precedence... + + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 0xfD & 0xF == 0xF ))' +} + +parentheses_head() +{ + atf_set "descr" "Test use of () to group sub-expressions" +} +parentheses_body() +{ + atf_check -s exit:0 -o inline:'6\n' -e empty ${TEST_SH} -c \ + 'echo $(( (1 + 2) + 3 ))' + atf_check -s exit:0 -o inline:'-4\n' -e empty ${TEST_SH} -c \ + 'echo $(( 1 - (2 + 3) ))' + atf_check -s exit:0 -o inline:'2\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3 - (2 - 1) ))' + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3 - ( 2 + 1 ) ))' + + atf_check -s exit:0 -o inline:'-3\n' -e empty ${TEST_SH} -c \ + 'echo $(( - (2 + 1) ))' + + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( ! (2 + 1) ))' + + atf_check -s exit:0 -o inline:'12\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3 * (2 + 2) ))' + atf_check -s exit:0 -o inline:'10\n' -e empty ${TEST_SH} -c \ + 'echo $(( (3 + 2) * 2 ))' + atf_check -s exit:0 -o inline:'12\n' -e empty ${TEST_SH} -c \ + 'echo $(( 3 * (2 * 2) ))' + + atf_check -s exit:0 -o inline:'1\n' -e empty ${TEST_SH} -c \ + 'echo $(( 9 / (3 + 2) ))' + atf_check -s exit:0 -o inline:'6\n' -e empty ${TEST_SH} -c \ + 'echo $(( ( 9 + 3 ) / 2 ))' + atf_check -s exit:0 -o inline:'9\n' -e empty ${TEST_SH} -c \ + 'echo $(( 9 / ( 3 / 2 ) ))' + + atf_check -s exit:0 -o inline:'20\n' -e empty ${TEST_SH} -c \ + 'echo $(( ( 9 << 1 ) + 2 ))' + atf_check -s exit:0 -o inline:'21\n' -e empty ${TEST_SH} -c \ + 'echo $(( 9 + (3 << 2) ))' + atf_check -s exit:0 -o inline:'36864\n' -e empty ${TEST_SH} -c \ + 'echo $(( 9 << (3 << 2) ))' + + atf_check -s exit:0 -o inline:'6\n' -e empty ${TEST_SH} -c \ + 'echo $(( (9 >> 1) + 2 ))' + atf_check -s exit:0 -o inline:'9\n' -e empty ${TEST_SH} -c \ + 'echo $(( 9 + (3 >> 2) ))' + atf_check -s exit:0 -o inline:'9\n' -e empty ${TEST_SH} -c \ + 'echo $(( 19 >> (3 >> 1) ))' + + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( 19 >> (3 << 1) ))' + atf_check -s exit:0 -o inline:'38\n' -e empty ${TEST_SH} -c \ + 'echo $(( 19 << (3 >> 1) ))' + + atf_check -s exit:0 -o inline:'2\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2 + (3 < 3) * 2 ))' + atf_check -s exit:0 -o inline:'32\n' -e empty ${TEST_SH} -c \ + 'echo $(( 2 << ((3 >= 3) << 2) ))' + + # sh inherits C's crazy operator precedence... + + atf_check -s exit:0 -o inline:'0\n' -e empty ${TEST_SH} -c \ + 'echo $(( (0xfD & 0xF) == 0xF ))' +} + +atf_test_case arithmetic_fails +arithmetic_fails_head() +{ + atf_set "descr" "Dummy test to force failure" +} +arithmetic_fails_body() +{ + atf_fail "Cannot estimate number of bits supported by $(( ))" +} + +atf_init_test_cases() { + + discover_range + + test "${ARITH_BITS}" = '?' && { + atf_add_test_case arithmetic_fails + return 0 + } + + # odd names are to get atf's sort order semi-rational + + atf_add_test_case constants + atf_add_test_case do_unary_plus + atf_add_test_case do_unary_minus + atf_add_test_case do_unary_not + atf_add_test_case do_unary_tilde + atf_add_test_case elementary_add + atf_add_test_case elementary_sub + atf_add_test_case elementary_mul + atf_add_test_case elementary_div + atf_add_test_case elementary_rem + atf_add_test_case elementary_shl + atf_add_test_case elementary_shr + atf_add_test_case elementary_eq + atf_add_test_case elementary_ne + atf_add_test_case elementary_lt + atf_add_test_case elementary_le + atf_add_test_case elementary_gt + atf_add_test_case elementary_ge + atf_add_test_case fiddle_bits_and + atf_add_test_case fiddle_bits_or + atf_add_test_case fiddle_bits_xor + atf_add_test_case logical_and + atf_add_test_case logical_or + atf_add_test_case make_selection + atf_add_test_case operator_precedence + atf_add_test_case parentheses + # atf_add_test_case progressive # build up big expr + # atf_add_test_case test_errors # erroneous input + # atf_add_test_case torture # hard stuff (if there is any) + # atf_add_test_case var_assign # assignment ops + # atf_add_test_case vulgarity # truly evil inputs (syntax in vars...) +} |
