diff options
Diffstat (limited to 'contrib/mdocml/mdoc.7')
| -rw-r--r-- | contrib/mdocml/mdoc.7 | 3235 |
1 files changed, 3235 insertions, 0 deletions
diff --git a/contrib/mdocml/mdoc.7 b/contrib/mdocml/mdoc.7 new file mode 100644 index 0000000..198a46a --- /dev/null +++ b/contrib/mdocml/mdoc.7 @@ -0,0 +1,3235 @@ +.\" $Id: mdoc.7,v 1.257 2015/11/05 12:06:45 schwarze Exp $ +.\" +.\" Copyright (c) 2009, 2010, 2011 Kristaps Dzonsons <kristaps@bsd.lv> +.\" Copyright (c) 2010, 2011, 2013 Ingo Schwarze <schwarze@openbsd.org> +.\" +.\" Permission to use, copy, modify, and distribute this software for any +.\" purpose with or without fee is hereby granted, provided that the above +.\" copyright notice and this permission notice appear in all copies. +.\" +.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF +.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +.\" +.Dd $Mdocdate: November 5 2015 $ +.Dt MDOC 7 +.Os +.Sh NAME +.Nm mdoc +.Nd semantic markup language for formatting manual pages +.Sh DESCRIPTION +The +.Nm mdoc +language supports authoring of manual pages for the +.Xr man 1 +utility by allowing semantic annotations of words, phrases, +page sections and complete manual pages. +Such annotations are used by formatting tools to achieve a uniform +presentation across all manuals written in +.Nm , +and to support hyperlinking if supported by the output medium. +.Pp +This reference document describes the structure of manual pages +and the syntax and usage of the +.Nm +language. +The reference implementation of a parsing and formatting tool is +.Xr mandoc 1 ; +the +.Sx COMPATIBILITY +section describes compatibility with other implementations. +.Pp +In an +.Nm +document, lines beginning with the control character +.Sq \&. +are called +.Dq macro lines . +The first word is the macro name. +It consists of two or three letters. +Most macro names begin with a capital letter. +For a list of available macros, see +.Sx MACRO OVERVIEW . +The words following the macro name are arguments to the macro, optionally +including the names of other, callable macros; see +.Sx MACRO SYNTAX +for details. +.Pp +Lines not beginning with the control character are called +.Dq text lines . +They provide free-form text to be printed; the formatting of the text +depends on the respective processing context: +.Bd -literal -offset indent +\&.Sh Macro lines change control state. +Text lines are interpreted within the current state. +.Ed +.Pp +Many aspects of the basic syntax of the +.Nm +language are based on the +.Xr roff 7 +language; see the +.Em LANGUAGE SYNTAX +and +.Em MACRO SYNTAX +sections in the +.Xr roff 7 +manual for details, in particular regarding +comments, escape sequences, whitespace, and quoting. +However, using +.Xr roff 7 +requests in +.Nm +documents is discouraged; +.Xr mandoc 1 +supports some of them merely for backward compatibility. +.Sh MANUAL STRUCTURE +A well-formed +.Nm +document consists of a document prologue followed by one or more +sections. +.Pp +The prologue, which consists of the +.Sx \&Dd , +.Sx \&Dt , +and +.Sx \&Os +macros in that order, is required for every document. +.Pp +The first section (sections are denoted by +.Sx \&Sh ) +must be the NAME section, consisting of at least one +.Sx \&Nm +followed by +.Sx \&Nd . +.Pp +Following that, convention dictates specifying at least the +.Em SYNOPSIS +and +.Em DESCRIPTION +sections, although this varies between manual sections. +.Pp +The following is a well-formed skeleton +.Nm +file for a utility +.Qq progname : +.Bd -literal -offset indent +\&.Dd $\&Mdocdate$ +\&.Dt PROGNAME section +\&.Os +\&.Sh NAME +\&.Nm progname +\&.Nd one line about what it does +\&.\e\(dq .Sh LIBRARY +\&.\e\(dq For sections 2, 3, and 9 only. +\&.\e\(dq Not used in OpenBSD. +\&.Sh SYNOPSIS +\&.Nm progname +\&.Op Fl options +\&.Ar +\&.Sh DESCRIPTION +The +\&.Nm +utility processes files ... +\&.\e\(dq .Sh CONTEXT +\&.\e\(dq For section 9 functions only. +\&.\e\(dq .Sh IMPLEMENTATION NOTES +\&.\e\(dq Not used in OpenBSD. +\&.\e\(dq .Sh RETURN VALUES +\&.\e\(dq For sections 2, 3, and 9 function return values only. +\&.\e\(dq .Sh ENVIRONMENT +\&.\e\(dq For sections 1, 6, 7, and 8 only. +\&.\e\(dq .Sh FILES +\&.\e\(dq .Sh EXIT STATUS +\&.\e\(dq For sections 1, 6, and 8 only. +\&.\e\(dq .Sh EXAMPLES +\&.\e\(dq .Sh DIAGNOSTICS +\&.\e\(dq For sections 1, 4, 6, 7, 8, and 9 printf/stderr messages only. +\&.\e\(dq .Sh ERRORS +\&.\e\(dq For sections 2, 3, 4, and 9 errno settings only. +\&.\e\(dq .Sh SEE ALSO +\&.\e\(dq .Xr foobar 1 +\&.\e\(dq .Sh STANDARDS +\&.\e\(dq .Sh HISTORY +\&.\e\(dq .Sh AUTHORS +\&.\e\(dq .Sh CAVEATS +\&.\e\(dq .Sh BUGS +\&.\e\(dq .Sh SECURITY CONSIDERATIONS +\&.\e\(dq Not used in OpenBSD. +.Ed +.Pp +The sections in an +.Nm +document are conventionally ordered as they appear above. +Sections should be composed as follows: +.Bl -ohang -offset Ds +.It Em NAME +The name(s) and a one line description of the documented material. +The syntax for this as follows: +.Bd -literal -offset indent +\&.Nm name0 , +\&.Nm name1 , +\&.Nm name2 +\&.Nd a one line description +.Ed +.Pp +Multiple +.Sq \&Nm +names should be separated by commas. +.Pp +The +.Sx \&Nm +macro(s) must precede the +.Sx \&Nd +macro. +.Pp +See +.Sx \&Nm +and +.Sx \&Nd . +.It Em LIBRARY +The name of the library containing the documented material, which is +assumed to be a function in a section 2, 3, or 9 manual. +The syntax for this is as follows: +.Bd -literal -offset indent +\&.Lb libarm +.Ed +.Pp +See +.Sx \&Lb . +.It Em SYNOPSIS +Documents the utility invocation syntax, function call syntax, or device +configuration. +.Pp +For the first, utilities (sections 1, 6, and 8), this is +generally structured as follows: +.Bd -literal -offset indent +\&.Nm bar +\&.Op Fl v +\&.Op Fl o Ar file +\&.Op Ar +\&.Nm foo +\&.Op Fl v +\&.Op Fl o Ar file +\&.Op Ar +.Ed +.Pp +Commands should be ordered alphabetically. +.Pp +For the second, function calls (sections 2, 3, 9): +.Bd -literal -offset indent +\&.In header.h +\&.Vt extern const char *global; +\&.Ft "char *" +\&.Fn foo "const char *src" +\&.Ft "char *" +\&.Fn bar "const char *src" +.Ed +.Pp +Ordering of +.Sx \&In , +.Sx \&Vt , +.Sx \&Fn , +and +.Sx \&Fo +macros should follow C header-file conventions. +.Pp +And for the third, configurations (section 4): +.Bd -literal -offset indent +\&.Cd \(dqit* at isa? port 0x2e\(dq +\&.Cd \(dqit* at isa? port 0x4e\(dq +.Ed +.Pp +Manuals not in these sections generally don't need a +.Em SYNOPSIS . +.Pp +Some macros are displayed differently in the +.Em SYNOPSIS +section, particularly +.Sx \&Nm , +.Sx \&Cd , +.Sx \&Fd , +.Sx \&Fn , +.Sx \&Fo , +.Sx \&In , +.Sx \&Vt , +and +.Sx \&Ft . +All of these macros are output on their own line. +If two such dissimilar macros are pairwise invoked (except for +.Sx \&Ft +before +.Sx \&Fo +or +.Sx \&Fn ) , +they are separated by a vertical space, unless in the case of +.Sx \&Fo , +.Sx \&Fn , +and +.Sx \&Ft , +which are always separated by vertical space. +.Pp +When text and macros following an +.Sx \&Nm +macro starting an input line span multiple output lines, +all output lines but the first will be indented to align +with the text immediately following the +.Sx \&Nm +macro, up to the next +.Sx \&Nm , +.Sx \&Sh , +or +.Sx \&Ss +macro or the end of an enclosing block, whichever comes first. +.It Em DESCRIPTION +This begins with an expansion of the brief, one line description in +.Em NAME : +.Bd -literal -offset indent +The +\&.Nm +utility does this, that, and the other. +.Ed +.Pp +It usually follows with a breakdown of the options (if documenting a +command), such as: +.Bd -literal -offset indent +The arguments are as follows: +\&.Bl \-tag \-width Ds +\&.It Fl v +Print verbose information. +\&.El +.Ed +.Pp +List the options in alphabetical order, +uppercase before lowercase for each letter and +with no regard to whether an option takes an argument. +Put digits in ascending order before all letter options. +.Pp +Manuals not documenting a command won't include the above fragment. +.Pp +Since the +.Em DESCRIPTION +section usually contains most of the text of a manual, longer manuals +often use the +.Sx \&Ss +macro to form subsections. +In very long manuals, the +.Em DESCRIPTION +may be split into multiple sections, each started by an +.Sx \&Sh +macro followed by a non-standard section name, and each having +several subsections, like in the present +.Nm +manual. +.It Em CONTEXT +This section lists the contexts in which functions can be called in section 9. +The contexts are autoconf, process, or interrupt. +.It Em IMPLEMENTATION NOTES +Implementation-specific notes should be kept here. +This is useful when implementing standard functions that may have side +effects or notable algorithmic implications. +.It Em RETURN VALUES +This section documents the +return values of functions in sections 2, 3, and 9. +.Pp +See +.Sx \&Rv . +.It Em ENVIRONMENT +Lists the environment variables used by the utility, +and explains the syntax and semantics of their values. +The +.Xr environ 7 +manual provides examples of typical content and formatting. +.Pp +See +.Sx \&Ev . +.It Em FILES +Documents files used. +It's helpful to document both the file name and a short description of how +the file is used (created, modified, etc.). +.Pp +See +.Sx \&Pa . +.It Em EXIT STATUS +This section documents the +command exit status for section 1, 6, and 8 utilities. +Historically, this information was described in +.Em DIAGNOSTICS , +a practise that is now discouraged. +.Pp +See +.Sx \&Ex . +.It Em EXAMPLES +Example usages. +This often contains snippets of well-formed, well-tested invocations. +Make sure that examples work properly! +.It Em DIAGNOSTICS +Documents error messages. +In section 4 and 9 manuals, these are usually messages printed by the +kernel to the console and to the kernel log. +In section 1, 6, 7, and 8, these are usually messages printed by +userland programs to the standard error output. +.Pp +Historically, this section was used in place of +.Em EXIT STATUS +for manuals in sections 1, 6, and 8; however, this practise is +discouraged. +.Pp +See +.Sx \&Bl +.Fl diag . +.It Em ERRORS +Documents +.Xr errno 2 +settings in sections 2, 3, 4, and 9. +.Pp +See +.Sx \&Er . +.It Em SEE ALSO +References other manuals with related topics. +This section should exist for most manuals. +Cross-references should conventionally be ordered first by section, then +alphabetically (ignoring case). +.Pp +References to other documentation concerning the topic of the manual page, +for example authoritative books or journal articles, may also be +provided in this section. +.Pp +See +.Sx \&Rs +and +.Sx \&Xr . +.It Em STANDARDS +References any standards implemented or used. +If not adhering to any standards, the +.Em HISTORY +section should be used instead. +.Pp +See +.Sx \&St . +.It Em HISTORY +A brief history of the subject, including where it was first implemented, +and when it was ported to or reimplemented for the operating system at hand. +.It Em AUTHORS +Credits to the person or persons who wrote the code and/or documentation. +Authors should generally be noted by both name and email address. +.Pp +See +.Sx \&An . +.It Em CAVEATS +Common misuses and misunderstandings should be explained +in this section. +.It Em BUGS +Known bugs, limitations, and work-arounds should be described +in this section. +.It Em SECURITY CONSIDERATIONS +Documents any security precautions that operators should consider. +.El +.Sh MACRO OVERVIEW +This overview is sorted such that macros of similar purpose are listed +together, to help find the best macro for any given purpose. +Deprecated macros are not included in the overview, but can be found below +in the alphabetical +.Sx MACRO REFERENCE . +.Ss Document preamble and NAME section macros +.Bl -column "Brq, Bro, Brc" description +.It Sx \&Dd Ta document date: Cm $\&Mdocdate$ | Ar month day , year +.It Sx \&Dt Ta document title: Ar TITLE section Op Ar arch +.It Sx \&Os Ta operating system version: Op Ar system Op Ar version +.It Sx \&Nm Ta document name (one argument) +.It Sx \&Nd Ta document description (one line) +.El +.Ss Sections and cross references +.Bl -column "Brq, Bro, Brc" description +.It Sx \&Sh Ta section header (one line) +.It Sx \&Ss Ta subsection header (one line) +.It Sx \&Sx Ta internal cross reference to a section or subsection +.It Sx \&Xr Ta cross reference to another manual page: Ar name section +.It Sx \&Pp , \&Lp Ta start a text paragraph (no arguments) +.El +.Ss Displays and lists +.Bl -column "Brq, Bro, Brc" description +.It Sx \&Bd , \&Ed Ta display block: +.Fl Ar type +.Op Fl offset Ar width +.Op Fl compact +.It Sx \&D1 Ta indented display (one line) +.It Sx \&Dl Ta indented literal display (one line) +.It Sx \&Ql Ta in-line literal display: Ql text +.It Sx \&Bl , \&El Ta list block: +.Fl Ar type +.Op Fl width Ar val +.Op Fl offset Ar val +.Op Fl compact +.It Sx \&It Ta list item (syntax depends on Fl Ar type ) +.It Sx \&Ta Ta table cell separator in Sx \&Bl Fl column No lists +.It Sx \&Rs , \&%* , \&Re Ta bibliographic block (references) +.El +.Ss Spacing control +.Bl -column "Brq, Bro, Brc" description +.It Sx \&Pf Ta prefix, no following horizontal space (one argument) +.It Sx \&Ns Ta roman font, no preceding horizontal space (no arguments) +.It Sx \&Ap Ta apostrophe without surrounding whitespace (no arguments) +.It Sx \&Sm Ta switch horizontal spacing mode: Op Cm on | off +.It Sx \&Bk , \&Ek Ta keep block: Fl words +.It Sx \&br Ta force output line break in text mode (no arguments) +.It Sx \&sp Ta force vertical space: Op Ar height +.El +.Ss Semantic markup for command line utilities: +.Bl -column "Brq, Bro, Brc" description +.It Sx \&Nm Ta start a SYNOPSIS block with the name of a utility +.It Sx \&Fl Ta command line options (flags) (>=0 arguments) +.It Sx \&Cm Ta command modifier (>0 arguments) +.It Sx \&Ar Ta command arguments (>=0 arguments) +.It Sx \&Op , \&Oo , \&Oc Ta optional syntax elements (enclosure) +.It Sx \&Ic Ta internal or interactive command (>0 arguments) +.It Sx \&Ev Ta environmental variable (>0 arguments) +.It Sx \&Pa Ta file system path (>=0 arguments) +.El +.Ss Semantic markup for function libraries: +.Bl -column "Brq, Bro, Brc" description +.It Sx \&Lb Ta function library (one argument) +.It Sx \&In Ta include file (one argument) +.It Sx \&Fd Ta other preprocessor directive (>0 arguments) +.It Sx \&Ft Ta function type (>0 arguments) +.It Sx \&Fo , \&Fc Ta function block: Ar funcname +.It Sx \&Fn Ta function name: +.Op Ar functype +.Ar funcname +.Oo +.Op Ar argtype +.Ar argname +.Oc +.It Sx \&Fa Ta function argument (>0 arguments) +.It Sx \&Vt Ta variable type (>0 arguments) +.It Sx \&Va Ta variable name (>0 arguments) +.It Sx \&Dv Ta defined variable or preprocessor constant (>0 arguments) +.It Sx \&Er Ta error constant (>0 arguments) +.It Sx \&Ev Ta environmental variable (>0 arguments) +.El +.Ss Various semantic markup: +.Bl -column "Brq, Bro, Brc" description +.It Sx \&An Ta author name (>0 arguments) +.It Sx \&Lk Ta hyperlink: Ar uri Op Ar name +.It Sx \&Mt Ta Do mailto Dc hyperlink: Ar address +.It Sx \&Cd Ta kernel configuration declaration (>0 arguments) +.It Sx \&Ad Ta memory address (>0 arguments) +.It Sx \&Ms Ta mathematical symbol (>0 arguments) +.El +.Ss Physical markup +.Bl -column "Brq, Bro, Brc" description +.It Sx \&Em Ta italic font or underline (emphasis) (>0 arguments) +.It Sx \&Sy Ta boldface font (symbolic) (>0 arguments) +.It Sx \&Li Ta typewriter font (literal) (>0 arguments) +.It Sx \&No Ta return to roman font (normal) (no arguments) +.It Sx \&Bf , \&Ef Ta font block: +.Op Fl Ar type | Cm \&Em | \&Li | \&Sy +.El +.Ss Physical enclosures +.Bl -column "Brq, Bro, Brc" description +.It Sx \&Dq , \&Do , \&Dc Ta enclose in typographic double quotes: Dq text +.It Sx \&Qq , \&Qo , \&Qc Ta enclose in typewriter double quotes: Qq text +.It Sx \&Sq , \&So , \&Sc Ta enclose in single quotes: Sq text +.It Sx \&Pq , \&Po , \&Pc Ta enclose in parentheses: Pq text +.It Sx \&Bq , \&Bo , \&Bc Ta enclose in square brackets: Bq text +.It Sx \&Brq , \&Bro , \&Brc Ta enclose in curly braces: Brq text +.It Sx \&Aq , \&Ao , \&Ac Ta enclose in angle brackets: Aq text +.It Sx \&Eo , \&Ec Ta generic enclosure +.El +.Ss Text production +.Bl -column "Brq, Bro, Brc" description +.It Sx \&Ex Fl std Ta standard command exit values: Op Ar utility ... +.It Sx \&Rv Fl std Ta standard function return values: Op Ar function ... +.It Sx \&St Ta reference to a standards document (one argument) +.It Sx \&At Ta At +.It Sx \&Bx Ta Bx +.It Sx \&Bsx Ta Bsx +.It Sx \&Nx Ta Nx +.It Sx \&Fx Ta Fx +.It Sx \&Ox Ta Ox +.It Sx \&Dx Ta Dx +.El +.Sh MACRO REFERENCE +This section is a canonical reference of all macros, arranged +alphabetically. +For the scoping of individual macros, see +.Sx MACRO SYNTAX . +.Ss \&%A +Author name of an +.Sx \&Rs +block. +Multiple authors should each be accorded their own +.Sx \%%A +line. +Author names should be ordered with full or abbreviated forename(s) +first, then full surname. +.Ss \&%B +Book title of an +.Sx \&Rs +block. +This macro may also be used in a non-bibliographic context when +referring to book titles. +.Ss \&%C +Publication city or location of an +.Sx \&Rs +block. +.Ss \&%D +Publication date of an +.Sx \&Rs +block. +Recommended formats of arguments are +.Ar month day , year +or just +.Ar year . +.Ss \&%I +Publisher or issuer name of an +.Sx \&Rs +block. +.Ss \&%J +Journal name of an +.Sx \&Rs +block. +.Ss \&%N +Issue number (usually for journals) of an +.Sx \&Rs +block. +.Ss \&%O +Optional information of an +.Sx \&Rs +block. +.Ss \&%P +Book or journal page number of an +.Sx \&Rs +block. +.Ss \&%Q +Institutional author (school, government, etc.) of an +.Sx \&Rs +block. +Multiple institutional authors should each be accorded their own +.Sx \&%Q +line. +.Ss \&%R +Technical report name of an +.Sx \&Rs +block. +.Ss \&%T +Article title of an +.Sx \&Rs +block. +This macro may also be used in a non-bibliographical context when +referring to article titles. +.Ss \&%U +URI of reference document. +.Ss \&%V +Volume number of an +.Sx \&Rs +block. +.Ss \&Ac +Close an +.Sx \&Ao +block. +Does not have any tail arguments. +.Ss \&Ad +Memory address. +Do not use this for postal addresses. +.Pp +Examples: +.Dl \&.Ad [0,$] +.Dl \&.Ad 0x00000000 +.Ss \&An +Author name. +Can be used both for the authors of the program, function, or driver +documented in the manual, or for the authors of the manual itself. +Requires either the name of an author or one of the following arguments: +.Pp +.Bl -tag -width "-nosplitX" -offset indent -compact +.It Fl split +Start a new output line before each subsequent invocation of +.Sx \&An . +.It Fl nosplit +The opposite of +.Fl split . +.El +.Pp +The default is +.Fl nosplit . +The effect of selecting either of the +.Fl split +modes ends at the beginning of the +.Em AUTHORS +section. +In the +.Em AUTHORS +section, the default is +.Fl nosplit +for the first author listing and +.Fl split +for all other author listings. +.Pp +Examples: +.Dl \&.An -nosplit +.Dl \&.An Kristaps Dzonsons \&Aq \&Mt kristaps@bsd.lv +.Ss \&Ao +Begin a block enclosed by angle brackets. +Does not have any head arguments. +.Pp +Examples: +.Dl \&.Fl -key= \&Ns \&Ao \&Ar val \&Ac +.Pp +See also +.Sx \&Aq . +.Ss \&Ap +Inserts an apostrophe without any surrounding whitespace. +This is generally used as a grammatical device when referring to the verb +form of a function. +.Pp +Examples: +.Dl \&.Fn execve \&Ap d +.Ss \&Aq +Encloses its arguments in angle brackets. +.Pp +Examples: +.Dl \&.Fl -key= \&Ns \&Aq \&Ar val +.Pp +.Em Remarks : +this macro is often abused for rendering URIs, which should instead use +.Sx \&Lk +or +.Sx \&Mt , +or to note pre-processor +.Dq Li #include +statements, which should use +.Sx \&In . +.Pp +See also +.Sx \&Ao . +.Ss \&Ar +Command arguments. +If an argument is not provided, the string +.Dq file ...\& +is used as a default. +.Pp +Examples: +.Dl ".Fl o Ar file" +.Dl ".Ar" +.Dl ".Ar arg1 , arg2 ." +.Pp +The arguments to the +.Sx \&Ar +macro are names and placeholders for command arguments; +for fixed strings to be passed verbatim as arguments, use +.Sx \&Fl +or +.Sx \&Cm . +.Ss \&At +Formats an +.At +version. +Accepts one optional argument: +.Pp +.Bl -tag -width "v[1-7] | 32vX" -offset indent -compact +.It Cm v[1-7] | 32v +A version of +.At . +.It Cm III +.At III . +.It Cm V[.[1-4]]? +A version of +.At V . +.El +.Pp +Note that these arguments do not begin with a hyphen. +.Pp +Examples: +.Dl \&.At +.Dl \&.At III +.Dl \&.At V.1 +.Pp +See also +.Sx \&Bsx , +.Sx \&Bx , +.Sx \&Dx , +.Sx \&Fx , +.Sx \&Nx , +and +.Sx \&Ox . +.Ss \&Bc +Close a +.Sx \&Bo +block. +Does not have any tail arguments. +.Ss \&Bd +Begin a display block. +Its syntax is as follows: +.Bd -ragged -offset indent +.Pf \. Sx \&Bd +.Fl Ns Ar type +.Op Fl offset Ar width +.Op Fl compact +.Ed +.Pp +Display blocks are used to select a different indentation and +justification than the one used by the surrounding text. +They may contain both macro lines and text lines. +By default, a display block is preceded by a vertical space. +.Pp +The +.Ar type +must be one of the following: +.Bl -tag -width 13n -offset indent +.It Fl centered +Produce one output line from each input line, and center-justify each line. +Using this display type is not recommended; many +.Nm +implementations render it poorly. +.It Fl filled +Change the positions of line breaks to fill each line, and left- and +right-justify the resulting block. +.It Fl literal +Produce one output line from each input line, +and do not justify the block at all. +Preserve white space as it appears in the input. +Always use a constant-width font. +Use this for displaying source code. +.It Fl ragged +Change the positions of line breaks to fill each line, and left-justify +the resulting block. +.It Fl unfilled +The same as +.Fl literal , +but using the same font as for normal text, which is a variable width font +if supported by the output device. +.El +.Pp +The +.Ar type +must be provided first. +Additional arguments may follow: +.Bl -tag -width 13n -offset indent +.It Fl offset Ar width +Indent the display by the +.Ar width , +which may be one of the following: +.Bl -item +.It +One of the pre-defined strings +.Cm indent , +the width of a standard indentation (six constant width characters); +.Cm indent-two , +twice +.Cm indent ; +.Cm left , +which has no effect; +.Cm right , +which justifies to the right margin; or +.Cm center , +which aligns around an imagined center axis. +.It +A macro invocation, which selects a predefined width +associated with that macro. +The most popular is the imaginary macro +.Ar \&Ds , +which resolves to +.Sy 6n . +.It +A scaling width as described in +.Xr roff 7 . +.It +An arbitrary string, which indents by the length of this string. +.El +.Pp +When the argument is missing, +.Fl offset +is ignored. +.It Fl compact +Do not assert vertical space before the display. +.El +.Pp +Examples: +.Bd -literal -offset indent +\&.Bd \-literal \-offset indent \-compact + Hello world. +\&.Ed +.Ed +.Pp +See also +.Sx \&D1 +and +.Sx \&Dl . +.Ss \&Bf +Change the font mode for a scoped block of text. +Its syntax is as follows: +.Bd -ragged -offset indent +.Pf \. Sx \&Bf +.Oo +.Fl emphasis | literal | symbolic | +.Cm \&Em | \&Li | \&Sy +.Oc +.Ed +.Pp +The +.Fl emphasis +and +.Cm \&Em +argument are equivalent, as are +.Fl symbolic +and +.Cm \&Sy , +and +.Fl literal +and +.Cm \&Li . +Without an argument, this macro does nothing. +The font mode continues until broken by a new font mode in a nested +scope or +.Sx \&Ef +is encountered. +.Pp +See also +.Sx \&Li , +.Sx \&Ef , +.Sx \&Em , +and +.Sx \&Sy . +.Ss \&Bk +For each macro, keep its output together on the same output line, +until the end of the macro or the end of the input line is reached, +whichever comes first. +Line breaks in text lines are unaffected. +The syntax is as follows: +.Pp +.D1 Pf \. Sx \&Bk Fl words +.Pp +The +.Fl words +argument is required; additional arguments are ignored. +.Pp +The following example will not break within each +.Sx \&Op +macro line: +.Bd -literal -offset indent +\&.Bk \-words +\&.Op Fl f Ar flags +\&.Op Fl o Ar output +\&.Ek +.Ed +.Pp +Be careful in using over-long lines within a keep block! +Doing so will clobber the right margin. +.Ss \&Bl +Begin a list. +Lists consist of items specified using the +.Sx \&It +macro, containing a head or a body or both. +The list syntax is as follows: +.Bd -ragged -offset indent +.Pf \. Sx \&Bl +.Fl Ns Ar type +.Op Fl width Ar val +.Op Fl offset Ar val +.Op Fl compact +.Op HEAD ... +.Ed +.Pp +The list +.Ar type +is mandatory and must be specified first. +The +.Fl width +and +.Fl offset +arguments accept macro names as described for +.Sx \&Bd +.Fl offset , +scaling widths as described in +.Xr roff 7 , +or use the length of the given string. +The +.Fl offset +is a global indentation for the whole list, affecting both item heads +and bodies. +For those list types supporting it, the +.Fl width +argument requests an additional indentation of item bodies, +to be added to the +.Fl offset . +Unless the +.Fl compact +argument is specified, list entries are separated by vertical space. +.Pp +A list must specify one of the following list types: +.Bl -tag -width 12n -offset indent +.It Fl bullet +No item heads can be specified, but a bullet will be printed at the head +of each item. +Item bodies start on the same output line as the bullet +and are indented according to the +.Fl width +argument. +.It Fl column +A columnated list. +The +.Fl width +argument has no effect; instead, each argument specifies the width +of one column, using either the scaling width syntax described in +.Xr roff 7 +or the string length of the argument. +If the first line of the body of a +.Fl column +list is not an +.Sx \&It +macro line, +.Sx \&It +contexts spanning one input line each are implied until an +.Sx \&It +macro line is encountered, at which point items start being interpreted as +described in the +.Sx \&It +documentation. +.It Fl dash +Like +.Fl bullet , +except that dashes are used in place of bullets. +.It Fl diag +Like +.Fl inset , +except that item heads are not parsed for macro invocations. +Most often used in the +.Em DIAGNOSTICS +section with error constants in the item heads. +.It Fl enum +A numbered list. +No item heads can be specified. +Formatted like +.Fl bullet , +except that cardinal numbers are used in place of bullets, +starting at 1. +.It Fl hang +Like +.Fl tag , +except that the first lines of item bodies are not indented, but follow +the item heads like in +.Fl inset +lists. +.It Fl hyphen +Synonym for +.Fl dash . +.It Fl inset +Item bodies follow items heads on the same line, using normal inter-word +spacing. +Bodies are not indented, and the +.Fl width +argument is ignored. +.It Fl item +No item heads can be specified, and none are printed. +Bodies are not indented, and the +.Fl width +argument is ignored. +.It Fl ohang +Item bodies start on the line following item heads and are not indented. +The +.Fl width +argument is ignored. +.It Fl tag +Item bodies are indented according to the +.Fl width +argument. +When an item head fits inside the indentation, the item body follows +this head on the same output line. +Otherwise, the body starts on the output line following the head. +.El +.Pp +Lists may be nested within lists and displays. +Nesting of +.Fl column +and +.Fl enum +lists may not be portable. +.Pp +See also +.Sx \&El +and +.Sx \&It . +.Ss \&Bo +Begin a block enclosed by square brackets. +Does not have any head arguments. +.Pp +Examples: +.Bd -literal -offset indent -compact +\&.Bo 1 , +\&.Dv BUFSIZ \&Bc +.Ed +.Pp +See also +.Sx \&Bq . +.Ss \&Bq +Encloses its arguments in square brackets. +.Pp +Examples: +.Dl \&.Bq 1 , \&Dv BUFSIZ +.Pp +.Em Remarks : +this macro is sometimes abused to emulate optional arguments for +commands; the correct macros to use for this purpose are +.Sx \&Op , +.Sx \&Oo , +and +.Sx \&Oc . +.Pp +See also +.Sx \&Bo . +.Ss \&Brc +Close a +.Sx \&Bro +block. +Does not have any tail arguments. +.Ss \&Bro +Begin a block enclosed by curly braces. +Does not have any head arguments. +.Pp +Examples: +.Bd -literal -offset indent -compact +\&.Bro 1 , ... , +\&.Va n \&Brc +.Ed +.Pp +See also +.Sx \&Brq . +.Ss \&Brq +Encloses its arguments in curly braces. +.Pp +Examples: +.Dl \&.Brq 1 , ... , \&Va n +.Pp +See also +.Sx \&Bro . +.Ss \&Bsx +Format the +.Bsx +version provided as an argument, or a default value if +no argument is provided. +.Pp +Examples: +.Dl \&.Bsx 1.0 +.Dl \&.Bsx +.Pp +See also +.Sx \&At , +.Sx \&Bx , +.Sx \&Dx , +.Sx \&Fx , +.Sx \&Nx , +and +.Sx \&Ox . +.Ss \&Bt +Supported only for compatibility, do not use this in new manuals. +Prints +.Dq is currently in beta test. +.Ss \&Bx +Format the +.Bx +version provided as an argument, or a default value if no +argument is provided. +.Pp +Examples: +.Dl \&.Bx 4.3 Tahoe +.Dl \&.Bx 4.4 +.Dl \&.Bx +.Pp +See also +.Sx \&At , +.Sx \&Bsx , +.Sx \&Dx , +.Sx \&Fx , +.Sx \&Nx , +and +.Sx \&Ox . +.Ss \&Cd +Kernel configuration declaration. +This denotes strings accepted by +.Xr config 8 . +It is most often used in section 4 manual pages. +.Pp +Examples: +.Dl \&.Cd device le0 at scode? +.Pp +.Em Remarks : +this macro is commonly abused by using quoted literals to retain +whitespace and align consecutive +.Sx \&Cd +declarations. +This practise is discouraged. +.Ss \&Cm +Command modifiers. +Typically used for fixed strings passed as arguments, unless +.Sx \&Fl +is more appropriate. +Also useful when specifying configuration options or keys. +.Pp +Examples: +.Dl ".Nm mt Fl f Ar device Cm rewind" +.Dl ".Nm ps Fl o Cm pid , Ns Cm command" +.Dl ".Nm dd Cm if= Ns Ar file1 Cm of= Ns Ar file2" +.Dl ".Cm IdentityFile Pa ~/.ssh/id_rsa" +.Dl ".Cm LogLevel Dv DEBUG" +.Ss \&D1 +One-line indented display. +This is formatted by the default rules and is useful for simple indented +statements. +It is followed by a newline. +.Pp +Examples: +.Dl \&.D1 \&Fl abcdefgh +.Pp +See also +.Sx \&Bd +and +.Sx \&Dl . +.Ss \&Db +This macro is obsolete. +No replacement is needed. +It is ignored by +.Xr mandoc 1 +and groff including its arguments. +It was formerly used to toggle a debugging mode. +.Ss \&Dc +Close a +.Sx \&Do +block. +Does not have any tail arguments. +.Ss \&Dd +Document date for display in the page footer. +This is the mandatory first macro of any +.Nm +manual. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Dd Ar month day , year +.Pp +The +.Ar month +is the full English month name, the +.Ar day +is an optionally zero-padded numeral, and the +.Ar year +is the full four-digit year. +.Pp +Other arguments are not portable; the +.Xr mandoc 1 +utility handles them as follows: +.Bl -dash -offset 3n -compact +.It +To have the date automatically filled in by the +.Ox +version of +.Xr cvs 1 , +the special string +.Dq $\&Mdocdate$ +can be given as an argument. +.It +The traditional, purely numeric +.Xr man 7 +format +.Ar year Ns \(en Ns Ar month Ns \(en Ns Ar day +is accepted, too. +.It +If a date string cannot be parsed, it is used verbatim. +.It +If no date string is given, the current date is used. +.El +.Pp +Examples: +.Dl \&.Dd $\&Mdocdate$ +.Dl \&.Dd $\&Mdocdate: July 21 2007$ +.Dl \&.Dd July 21, 2007 +.Pp +See also +.Sx \&Dt +and +.Sx \&Os . +.Ss \&Dl +One-line indented display. +This is formatted as literal text and is useful for commands and +invocations. +It is followed by a newline. +.Pp +Examples: +.Dl \&.Dl % mandoc mdoc.7 \e(ba less +.Pp +See also +.Sx \&Ql , +.Sx \&Bd +.Fl literal , +and +.Sx \&D1 . +.Ss \&Do +Begin a block enclosed by double quotes. +Does not have any head arguments. +.Pp +Examples: +.Bd -literal -offset indent -compact +\&.Do +April is the cruellest month +\&.Dc +\e(em T.S. Eliot +.Ed +.Pp +See also +.Sx \&Dq . +.Ss \&Dq +Encloses its arguments in +.Dq typographic +double-quotes. +.Pp +Examples: +.Bd -literal -offset indent -compact +\&.Dq April is the cruellest month +\e(em T.S. Eliot +.Ed +.Pp +See also +.Sx \&Qq , +.Sx \&Sq , +and +.Sx \&Do . +.Ss \&Dt +Document title for display in the page header. +This is the mandatory second macro of any +.Nm +file. +Its syntax is as follows: +.Bd -ragged -offset indent +.Pf \. Sx \&Dt +.Ar TITLE +.Ar section +.Op Ar arch +.Ed +.Pp +Its arguments are as follows: +.Bl -tag -width section -offset 2n +.It Ar TITLE +The document's title (name), defaulting to +.Dq UNTITLED +if unspecified. +To achieve a uniform appearance of page header lines, +it should by convention be all caps. +.It Ar section +The manual section. +This may be one of +.Cm 1 +.Pq General Commands , +.Cm 2 +.Pq System Calls , +.Cm 3 +.Pq Library Functions , +.Cm 3p +.Pq Perl Library , +.Cm 4 +.Pq Device Drivers , +.Cm 5 +.Pq File Formats , +.Cm 6 +.Pq Games , +.Cm 7 +.Pq Miscellaneous Information , +.Cm 8 +.Pq System Manager's Manual , +or +.Cm 9 +.Pq Kernel Developer's Manual . +It should correspond to the manual's filename suffix and defaults to +the empty string if unspecified. +.It Ar arch +This specifies the machine architecture a manual page applies to, +where relevant, for example +.Cm alpha , +.Cm amd64 , +.Cm i386 , +or +.Cm sparc64 . +The list of valid architectures varies by operating system. +.El +.Pp +Examples: +.Dl \&.Dt FOO 1 +.Dl \&.Dt FOO 9 i386 +.Pp +See also +.Sx \&Dd +and +.Sx \&Os . +.Ss \&Dv +Defined variables such as preprocessor constants, constant symbols, +enumeration values, and so on. +.Pp +Examples: +.Dl \&.Dv NULL +.Dl \&.Dv BUFSIZ +.Dl \&.Dv STDOUT_FILENO +.Pp +See also +.Sx \&Er +and +.Sx \&Ev +for special-purpose constants, +.Sx \&Va +for variable symbols, and +.Sx \&Fd +for listing preprocessor variable definitions in the +.Em SYNOPSIS . +.Ss \&Dx +Format the +.Dx +version provided as an argument, or a default +value if no argument is provided. +.Pp +Examples: +.Dl \&.Dx 2.4.1 +.Dl \&.Dx +.Pp +See also +.Sx \&At , +.Sx \&Bsx , +.Sx \&Bx , +.Sx \&Fx , +.Sx \&Nx , +and +.Sx \&Ox . +.Ss \&Ec +Close a scope started by +.Sx \&Eo . +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Ec Op Ar TERM +.Pp +The +.Ar TERM +argument is used as the enclosure tail, for example, specifying \e(rq +will emulate +.Sx \&Dc . +.Ss \&Ed +End a display context started by +.Sx \&Bd . +.Ss \&Ef +End a font mode context started by +.Sx \&Bf . +.Ss \&Ek +End a keep context started by +.Sx \&Bk . +.Ss \&El +End a list context started by +.Sx \&Bl . +.Pp +See also +.Sx \&Bl +and +.Sx \&It . +.Ss \&Em +Request an italic font. +If the output device does not provide that, underline. +.Pp +This is most often used for stress emphasis (not to be confused with +importance, see +.Sx \&Sy ) . +In the rare cases where none of the semantic markup macros fit, +it can also be used for technical terms and placeholders, except +that for syntax elements, +.Sx \&Sy +and +.Sx \&Ar +are preferred, respectively. +.Pp +Examples: +.Bd -literal -compact -offset indent +Selected lines are those +\&.Em not +matching any of the specified patterns. +Some of the functions use a +\&.Em hold space +to save the pattern space for subsequent retrieval. +.Ed +.Pp +See also +.Sx \&Bf , +.Sx \&Li , +.Sx \&No , +and +.Sx \&Sy . +.Ss \&En +This macro is obsolete. +Use +.Sx \&Eo +or any of the other enclosure macros. +.Pp +It encloses its argument in the delimiters specified by the last +.Sx \&Es +macro. +.Ss \&Eo +An arbitrary enclosure. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Eo Op Ar TERM +.Pp +The +.Ar TERM +argument is used as the enclosure head, for example, specifying \e(lq +will emulate +.Sx \&Do . +.Ss \&Er +Error constants for definitions of the +.Va errno +libc global variable. +This is most often used in section 2 and 3 manual pages. +.Pp +Examples: +.Dl \&.Er EPERM +.Dl \&.Er ENOENT +.Pp +See also +.Sx \&Dv +for general constants. +.Ss \&Es +This macro is obsolete. +Use +.Sx \&Eo +or any of the other enclosure macros. +.Pp +It takes two arguments, defining the delimiters to be used by subsequent +.Sx \&En +macros. +.Ss \&Ev +Environmental variables such as those specified in +.Xr environ 7 . +.Pp +Examples: +.Dl \&.Ev DISPLAY +.Dl \&.Ev PATH +.Pp +See also +.Sx \&Dv +for general constants. +.Ss \&Ex +Insert a standard sentence regarding command exit values of 0 on success +and >0 on failure. +This is most often used in section 1, 6, and 8 manual pages. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Ex Fl std Op Ar utility ... +.Pp +If +.Ar utility +is not specified, the document's name set by +.Sx \&Nm +is used. +Multiple +.Ar utility +arguments are treated as separate utilities. +.Pp +See also +.Sx \&Rv . +.Ss \&Fa +Function argument or parameter. +Its syntax is as follows: +.Bd -ragged -offset indent +.Pf \. Sx \&Fa +.Qo +.Op Ar argtype +.Op Ar argname +.Qc Ar \&... +.Ed +.Pp +Each argument may be a name and a type (recommended for the +.Em SYNOPSIS +section), a name alone (for function invocations), +or a type alone (for function prototypes). +If both a type and a name are given or if the type consists of multiple +words, all words belonging to the same function argument have to be +given in a single argument to the +.Sx \&Fa +macro. +.Pp +This macro is also used to specify the field name of a structure. +.Pp +Most often, the +.Sx \&Fa +macro is used in the +.Em SYNOPSIS +within +.Sx \&Fo +blocks when documenting multi-line function prototypes. +If invoked with multiple arguments, the arguments are separated by a +comma. +Furthermore, if the following macro is another +.Sx \&Fa , +the last argument will also have a trailing comma. +.Pp +Examples: +.Dl \&.Fa \(dqconst char *p\(dq +.Dl \&.Fa \(dqint a\(dq \(dqint b\(dq \(dqint c\(dq +.Dl \&.Fa \(dqchar *\(dq size_t +.Pp +See also +.Sx \&Fo . +.Ss \&Fc +End a function context started by +.Sx \&Fo . +.Ss \&Fd +Preprocessor directive, in particular for listing it in the +.Em SYNOPSIS . +Historically, it was also used to document include files. +The latter usage has been deprecated in favour of +.Sx \&In . +.Pp +Its syntax is as follows: +.Bd -ragged -offset indent +.Pf \. Sx \&Fd +.Li # Ns Ar directive +.Op Ar argument ... +.Ed +.Pp +Examples: +.Dl \&.Fd #define sa_handler __sigaction_u.__sa_handler +.Dl \&.Fd #define SIO_MAXNFDS +.Dl \&.Fd #ifdef FS_DEBUG +.Dl \&.Ft void +.Dl \&.Fn dbg_open \(dqconst char *\(dq +.Dl \&.Fd #endif +.Pp +See also +.Sx MANUAL STRUCTURE , +.Sx \&In , +and +.Sx \&Dv . +.Ss \&Fl +Command-line flag or option. +Used when listing arguments to command-line utilities. +Prints a fixed-width hyphen +.Sq \- +directly followed by each argument. +If no arguments are provided, a hyphen is printed followed by a space. +If the argument is a macro, a hyphen is prefixed to the subsequent macro +output. +.Pp +Examples: +.Dl ".Fl R Op Fl H | L | P" +.Dl ".Op Fl 1AaCcdFfgHhikLlmnopqRrSsTtux" +.Dl ".Fl type Cm d Fl name Pa CVS" +.Dl ".Fl Ar signal_number" +.Dl ".Fl o Fl" +.Pp +See also +.Sx \&Cm . +.Ss \&Fn +A function name. +Its syntax is as follows: +.Bd -ragged -offset indent +.Pf . Sx \&Fn +.Op Ar functype +.Ar funcname +.Op Oo Ar argtype Oc Ar argname +.Ed +.Pp +Function arguments are surrounded in parenthesis and +are delimited by commas. +If no arguments are specified, blank parenthesis are output. +In the +.Em SYNOPSIS +section, this macro starts a new output line, +and a blank line is automatically inserted between function definitions. +.Pp +Examples: +.Dl \&.Fn \(dqint funcname\(dq \(dqint arg0\(dq \(dqint arg1\(dq +.Dl \&.Fn funcname \(dqint arg0\(dq +.Dl \&.Fn funcname arg0 +.Pp +.Bd -literal -offset indent -compact +\&.Ft functype +\&.Fn funcname +.Ed +.Pp +When referring to a function documented in another manual page, use +.Sx \&Xr +instead. +See also +.Sx MANUAL STRUCTURE , +.Sx \&Fo , +and +.Sx \&Ft . +.Ss \&Fo +Begin a function block. +This is a multi-line version of +.Sx \&Fn . +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Fo Ar funcname +.Pp +Invocations usually occur in the following context: +.Bd -ragged -offset indent +.Pf \. Sx \&Ft Ar functype +.br +.Pf \. Sx \&Fo Ar funcname +.br +.Pf \. Sx \&Fa Qq Ar argtype Ar argname +.br +\&.\.\. +.br +.Pf \. Sx \&Fc +.Ed +.Pp +A +.Sx \&Fo +scope is closed by +.Sx \&Fc . +.Pp +See also +.Sx MANUAL STRUCTURE , +.Sx \&Fa , +.Sx \&Fc , +and +.Sx \&Ft . +.Ss \&Fr +This macro is obsolete. +No replacement markup is needed. +.Pp +It was used to show numerical function return values in an italic font. +.Ss \&Ft +A function type. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Ft Ar functype +.Pp +In the +.Em SYNOPSIS +section, a new output line is started after this macro. +.Pp +Examples: +.Dl \&.Ft int +.Bd -literal -offset indent -compact +\&.Ft functype +\&.Fn funcname +.Ed +.Pp +See also +.Sx MANUAL STRUCTURE , +.Sx \&Fn , +and +.Sx \&Fo . +.Ss \&Fx +Format the +.Fx +version provided as an argument, or a default value +if no argument is provided. +.Pp +Examples: +.Dl \&.Fx 7.1 +.Dl \&.Fx +.Pp +See also +.Sx \&At , +.Sx \&Bsx , +.Sx \&Bx , +.Sx \&Dx , +.Sx \&Nx , +and +.Sx \&Ox . +.Ss \&Hf +This macro is not implemented in +.Xr mandoc 1 . +.Pp +It was used to include the contents of a (header) file literally. +The syntax was: +.Pp +.Dl Pf . Sx \&Hf Ar filename +.Ss \&Ic +Designate an internal or interactive command. +This is similar to +.Sx \&Cm +but used for instructions rather than values. +.Pp +Examples: +.Dl \&.Ic :wq +.Dl \&.Ic hash +.Dl \&.Ic alias +.Pp +Note that using +.Sx \&Bd Fl literal +or +.Sx \&D1 +is preferred for displaying code; the +.Sx \&Ic +macro is used when referring to specific instructions. +.Ss \&In +The name of an include file. +This macro is most often used in section 2, 3, and 9 manual pages. +.Pp +When invoked as the first macro on an input line in the +.Em SYNOPSIS +section, the argument is displayed in angle brackets +and preceded by +.Qq #include , +and a blank line is inserted in front if there is a preceding +function declaration. +In other sections, it only encloses its argument in angle brackets +and causes no line break. +.Pp +Examples: +.Dl \&.In sys/types.h +.Pp +See also +.Sx MANUAL STRUCTURE . +.Ss \&It +A list item. +The syntax of this macro depends on the list type. +.Pp +Lists +of type +.Fl hang , +.Fl ohang , +.Fl inset , +and +.Fl diag +have the following syntax: +.Pp +.D1 Pf \. Sx \&It Ar args +.Pp +Lists of type +.Fl bullet , +.Fl dash , +.Fl enum , +.Fl hyphen +and +.Fl item +have the following syntax: +.Pp +.D1 Pf \. Sx \&It +.Pp +with subsequent lines interpreted within the scope of the +.Sx \&It +until either a closing +.Sx \&El +or another +.Sx \&It . +.Pp +The +.Fl tag +list has the following syntax: +.Pp +.D1 Pf \. Sx \&It Op Cm args +.Pp +Subsequent lines are interpreted as with +.Fl bullet +and family. +The line arguments correspond to the list's left-hand side; body +arguments correspond to the list's contents. +.Pp +The +.Fl column +list is the most complicated. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&It Ar cell Op <TAB> Ar cell ... +.D1 Pf \. Sx \&It Ar cell Op Sx \&Ta Ar cell ... +.Pp +The arguments consist of one or more lines of text and macros +representing a complete table line. +Cells within the line are delimited by tabs or by the special +.Sx \&Ta +block macro. +The tab cell delimiter may only be used within the +.Sx \&It +line itself; on following lines, only the +.Sx \&Ta +macro can be used to delimit cells, and +.Sx \&Ta +is only recognised as a macro when called by other macros, +not as the first macro on a line. +.Pp +Note that quoted strings may span tab-delimited cells on an +.Sx \&It +line. +For example, +.Pp +.Dl .It \(dqcol1 ; <TAB> col2 ;\(dq \&; +.Pp +will preserve the semicolon whitespace except for the last. +.Pp +See also +.Sx \&Bl . +.Ss \&Lb +Specify a library. +The syntax is as follows: +.Pp +.D1 Pf \. Sx \&Lb Ar library +.Pp +The +.Ar library +parameter may be a system library, such as +.Cm libz +or +.Cm libpam , +in which case a small library description is printed next to the linker +invocation; or a custom library, in which case the library name is +printed in quotes. +This is most commonly used in the +.Em SYNOPSIS +section as described in +.Sx MANUAL STRUCTURE . +.Pp +Examples: +.Dl \&.Lb libz +.Dl \&.Lb libmandoc +.Ss \&Li +Denotes text that should be in a +.Li literal +font mode. +Note that this is a presentation term and should not be used for +stylistically decorating technical terms. +.Pp +On terminal output devices, this is often indistinguishable from +normal text. +.Pp +See also +.Sx \&Bf , +.Sx \&Em , +.Sx \&No , +and +.Sx \&Sy . +.Ss \&Lk +Format a hyperlink. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Lk Ar uri Op Ar name +.Pp +Examples: +.Dl \&.Lk http://bsd.lv \(dqThe BSD.lv Project\(dq +.Dl \&.Lk http://bsd.lv +.Pp +See also +.Sx \&Mt . +.Ss \&Lp +Synonym for +.Sx \&Pp . +.Ss \&Ms +Display a mathematical symbol. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Ms Ar symbol +.Pp +Examples: +.Dl \&.Ms sigma +.Dl \&.Ms aleph +.Ss \&Mt +Format a +.Dq mailto: +hyperlink. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Mt Ar address +.Pp +Examples: +.Dl \&.Mt discuss@manpages.bsd.lv +.Dl \&.An Kristaps Dzonsons \&Aq \&Mt kristaps@bsd.lv +.Ss \&Nd +A one line description of the manual's content. +This is the mandatory last macro of the +.Em NAME +section and not appropriate for other sections. +.Pp +Examples: +.Dl Pf . Sx \&Nd mdoc language reference +.Dl Pf . Sx \&Nd format and display UNIX manuals +.Pp +The +.Sx \&Nd +macro technically accepts child macros and terminates with a subsequent +.Sx \&Sh +invocation. +Do not assume this behaviour: some +.Xr whatis 1 +database generators are not smart enough to parse more than the line +arguments and will display macros verbatim. +.Pp +See also +.Sx \&Nm . +.Ss \&Nm +The name of the manual page, or \(em in particular in section 1, 6, +and 8 pages \(em of an additional command or feature documented in +the manual page. +When first invoked, the +.Sx \&Nm +macro expects a single argument, the name of the manual page. +Usually, the first invocation happens in the +.Em NAME +section of the page. +The specified name will be remembered and used whenever the macro is +called again without arguments later in the page. +The +.Sx \&Nm +macro uses +.Sx Block full-implicit +semantics when invoked as the first macro on an input line in the +.Em SYNOPSIS +section; otherwise, it uses ordinary +.Sx In-line +semantics. +.Pp +Examples: +.Bd -literal -offset indent +\&.Sh SYNOPSIS +\&.Nm cat +\&.Op Fl benstuv +\&.Op Ar +.Ed +.Pp +In the +.Em SYNOPSIS +of section 2, 3 and 9 manual pages, use the +.Sx \&Fn +macro rather than +.Sx \&Nm +to mark up the name of the manual page. +.Ss \&No +Normal text. +Closes the scope of any preceding in-line macro. +When used after physical formatting macros like +.Sx \&Em +or +.Sx \&Sy , +switches back to the standard font face and weight. +Can also be used to embed plain text strings in macro lines +using semantic annotation macros. +.Pp +Examples: +.Dl ".Em italic , Sy bold , No and roman" +.Pp +.Bd -literal -offset indent -compact +\&.Sm off +\&.Cm :C No / Ar pattern No / Ar replacement No / +\&.Sm on +.Ed +.Pp +See also +.Sx \&Em , +.Sx \&Li , +and +.Sx \&Sy . +.Ss \&Ns +Suppress a space between the output of the preceding macro +and the following text or macro. +Following invocation, input is interpreted as normal text +just like after an +.Sx \&No +macro. +.Pp +This has no effect when invoked at the start of a macro line. +.Pp +Examples: +.Dl ".Ar name Ns = Ns Ar value" +.Dl ".Cm :M Ns Ar pattern" +.Dl ".Fl o Ns Ar output" +.Pp +See also +.Sx \&No +and +.Sx \&Sm . +.Ss \&Nx +Format the +.Nx +version provided as an argument, or a default value if +no argument is provided. +.Pp +Examples: +.Dl \&.Nx 5.01 +.Dl \&.Nx +.Pp +See also +.Sx \&At , +.Sx \&Bsx , +.Sx \&Bx , +.Sx \&Dx , +.Sx \&Fx , +and +.Sx \&Ox . +.Ss \&Oc +Close multi-line +.Sx \&Oo +context. +.Ss \&Oo +Multi-line version of +.Sx \&Op . +.Pp +Examples: +.Bd -literal -offset indent -compact +\&.Oo +\&.Op Fl flag Ns Ar value +\&.Oc +.Ed +.Ss \&Op +Optional part of a command line. +Prints the argument(s) in brackets. +This is most often used in the +.Em SYNOPSIS +section of section 1 and 8 manual pages. +.Pp +Examples: +.Dl \&.Op \&Fl a \&Ar b +.Dl \&.Op \&Ar a | b +.Pp +See also +.Sx \&Oo . +.Ss \&Os +Operating system version for display in the page footer. +This is the mandatory third macro of +any +.Nm +file. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Os Op Ar system Op Ar version +.Pp +The optional +.Ar system +parameter specifies the relevant operating system or environment. +It is suggested to leave it unspecified, in which case +.Xr mandoc 1 +uses its +.Fl Ios +argument or, if that isn't specified either, +.Fa sysname +and +.Fa release +as returned by +.Xr uname 3 . +.Pp +Examples: +.Dl \&.Os +.Dl \&.Os KTH/CSC/TCS +.Dl \&.Os BSD 4.3 +.Pp +See also +.Sx \&Dd +and +.Sx \&Dt . +.Ss \&Ot +This macro is obsolete. +Use +.Sx \&Ft +instead; with +.Xr mandoc 1 , +both have the same effect. +.Pp +Historical +.Nm +packages described it as +.Dq "old function type (FORTRAN)" . +.Ss \&Ox +Format the +.Ox +version provided as an argument, or a default value +if no argument is provided. +.Pp +Examples: +.Dl \&.Ox 4.5 +.Dl \&.Ox +.Pp +See also +.Sx \&At , +.Sx \&Bsx , +.Sx \&Bx , +.Sx \&Dx , +.Sx \&Fx , +and +.Sx \&Nx . +.Ss \&Pa +An absolute or relative file system path, or a file or directory name. +If an argument is not provided, the character +.Sq \(ti +is used as a default. +.Pp +Examples: +.Dl \&.Pa /usr/bin/mandoc +.Dl \&.Pa /usr/share/man/man7/mdoc.7 +.Pp +See also +.Sx \&Lk . +.Ss \&Pc +Close parenthesised context opened by +.Sx \&Po . +.Ss \&Pf +Removes the space between its argument and the following macro. +Its syntax is as follows: +.Pp +.D1 .Pf Ar prefix macro arguments ... +.Pp +This is equivalent to: +.Pp +.D1 .No \e& Ns Ar prefix No \&Ns Ar macro arguments ... +.Pp +The +.Ar prefix +argument is not parsed for macro names or delimiters, +but used verbatim as if it were escaped. +.Pp +Examples: +.Dl ".Pf $ Ar variable_name" +.Dl ".Pf . Ar macro_name" +.Dl ".Pf 0x Ar hex_digits" +.Pp +See also +.Sx \&Ns +and +.Sx \&Sm . +.Ss \&Po +Multi-line version of +.Sx \&Pq . +.Ss \&Pp +Break a paragraph. +This will assert vertical space between prior and subsequent macros +and/or text. +.Pp +Paragraph breaks are not needed before or after +.Sx \&Sh +or +.Sx \&Ss +macros or before displays +.Pq Sx \&Bd +or lists +.Pq Sx \&Bl +unless the +.Fl compact +flag is given. +.Ss \&Pq +Parenthesised enclosure. +.Pp +See also +.Sx \&Po . +.Ss \&Qc +Close quoted context opened by +.Sx \&Qo . +.Ss \&Ql +In-line literal display. +This can for example be used for complete command invocations and +for multi-word code fragments when more specific markup is not +appropriate and an indented display is not desired. +While +.Xr mandoc 1 +always encloses the arguments in single quotes, other formatters +usually omit the quotes on non-terminal output devices when the +arguments have three or more characters. +.Pp +See also +.Sx \&Dl +and +.Sx \&Bd +.Fl literal . +.Ss \&Qo +Multi-line version of +.Sx \&Qq . +.Ss \&Qq +Encloses its arguments in +.Qq typewriter +double-quotes. +Consider using +.Sx \&Dq . +.Pp +See also +.Sx \&Dq , +.Sx \&Sq , +and +.Sx \&Qo . +.Ss \&Re +Close an +.Sx \&Rs +block. +Does not have any tail arguments. +.Ss \&Rs +Begin a bibliographic +.Pq Dq reference +block. +Does not have any head arguments. +The block macro may only contain +.Sx \&%A , +.Sx \&%B , +.Sx \&%C , +.Sx \&%D , +.Sx \&%I , +.Sx \&%J , +.Sx \&%N , +.Sx \&%O , +.Sx \&%P , +.Sx \&%Q , +.Sx \&%R , +.Sx \&%T , +.Sx \&%U , +and +.Sx \&%V +child macros (at least one must be specified). +.Pp +Examples: +.Bd -literal -offset indent -compact +\&.Rs +\&.%A J. E. Hopcroft +\&.%A J. D. Ullman +\&.%B Introduction to Automata Theory, Languages, and Computation +\&.%I Addison-Wesley +\&.%C Reading, Massachusetts +\&.%D 1979 +\&.Re +.Ed +.Pp +If an +.Sx \&Rs +block is used within a SEE ALSO section, a vertical space is asserted +before the rendered output, else the block continues on the current +line. +.Ss \&Rv +Insert a standard sentence regarding a function call's return value of 0 +on success and \-1 on error, with the +.Va errno +libc global variable set on error. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Rv Fl std Op Ar function ... +.Pp +If +.Ar function +is not specified, the document's name set by +.Sx \&Nm +is used. +Multiple +.Ar function +arguments are treated as separate functions. +.Pp +See also +.Sx \&Ex . +.Ss \&Sc +Close single-quoted context opened by +.Sx \&So . +.Ss \&Sh +Begin a new section. +For a list of conventional manual sections, see +.Sx MANUAL STRUCTURE . +These sections should be used unless it's absolutely necessary that +custom sections be used. +.Pp +Section names should be unique so that they may be keyed by +.Sx \&Sx . +Although this macro is parsed, it should not consist of child node or it +may not be linked with +.Sx \&Sx . +.Pp +See also +.Sx \&Pp , +.Sx \&Ss , +and +.Sx \&Sx . +.Ss \&Sm +Switches the spacing mode for output generated from macros. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Sm Op Cm on | off +.Pp +By default, spacing is +.Cm on . +When switched +.Cm off , +no white space is inserted between macro arguments and between the +output generated from adjacent macros, but text lines +still get normal spacing between words and sentences. +.Pp +When called without an argument, the +.Sx \&Sm +macro toggles the spacing mode. +Using this is not recommended because it makes the code harder to read. +.Ss \&So +Multi-line version of +.Sx \&Sq . +.Ss \&Sq +Encloses its arguments in +.Sq typewriter +single-quotes. +.Pp +See also +.Sx \&Dq , +.Sx \&Qq , +and +.Sx \&So . +.Ss \&Ss +Begin a new subsection. +Unlike with +.Sx \&Sh , +there is no convention for the naming of subsections. +Except +.Em DESCRIPTION , +the conventional sections described in +.Sx MANUAL STRUCTURE +rarely have subsections. +.Pp +Sub-section names should be unique so that they may be keyed by +.Sx \&Sx . +Although this macro is parsed, it should not consist of child node or it +may not be linked with +.Sx \&Sx . +.Pp +See also +.Sx \&Pp , +.Sx \&Sh , +and +.Sx \&Sx . +.Ss \&St +Replace an abbreviation for a standard with the full form. +The following standards are recognised. +Where multiple lines are given without a blank line in between, +they all refer to the same standard, and using the first form +is recommended. +.Bl -tag -width 1n +.It C language standards +.Pp +.Bl -tag -width "-p1003.1g-2000" -compact +.It \-ansiC +.St -ansiC +.It \-ansiC-89 +.St -ansiC-89 +.It \-isoC +.St -isoC +.It \-isoC-90 +.St -isoC-90 +.br +The original C standard. +.Pp +.It \-isoC-amd1 +.St -isoC-amd1 +.Pp +.It \-isoC-tcor1 +.St -isoC-tcor1 +.Pp +.It \-isoC-tcor2 +.St -isoC-tcor2 +.Pp +.It \-isoC-99 +.St -isoC-99 +.br +The second major version of the C language standard. +.Pp +.It \-isoC-2011 +.St -isoC-2011 +.br +The third major version of the C language standard. +.El +.It POSIX.1 before the Single UNIX Specification +.Pp +.Bl -tag -width "-p1003.1g-2000" -compact +.It \-p1003.1-88 +.St -p1003.1-88 +.It \-p1003.1 +.St -p1003.1 +.br +The original POSIX standard, based on ANSI C. +.Pp +.It \-p1003.1-90 +.St -p1003.1-90 +.It \-iso9945-1-90 +.St -iso9945-1-90 +.br +The first update of POSIX.1. +.Pp +.It \-p1003.1b-93 +.St -p1003.1b-93 +.It \-p1003.1b +.St -p1003.1b +.br +Real-time extensions. +.Pp +.It \-p1003.1c-95 +.St -p1003.1c-95 +.br +POSIX thread interfaces. +.Pp +.It \-p1003.1i-95 +.St -p1003.1i-95 +.br +Technical Corrigendum. +.Pp +.It \-p1003.1-96 +.St -p1003.1-96 +.It \-iso9945-1-96 +.St -iso9945-1-96 +.br +Includes POSIX.1-1990, 1b, 1c, and 1i. +.El +.It X/Open Portability Guide version 4 and related standards +.Pp +.Bl -tag -width "-p1003.1g-2000" -compact +.It \-xpg3 +.St -xpg3 +.br +An XPG4 precursor, published in 1989. +.Pp +.It \-p1003.2 +.St -p1003.2 +.It \-p1003.2-92 +.St -p1003.2-92 +.It \-iso9945-2-93 +.St -iso9945-2-93 +.br +An XCU4 precursor. +.Pp +.It \-p1003.2a-92 +.St -p1003.2a-92 +.br +Updates to POSIX.2. +.Pp +.It \-xpg4 +.St -xpg4 +.br +Based on POSIX.1 and POSIX.2, published in 1992. +.El +.It Single UNIX Specification version 1 and related standards +.Pp +.Bl -tag -width "-p1003.1g-2000" -compact +.It \-susv1 +.St -susv1 +.It \-xpg4.2 +.St -xpg4.2 +.br +This standard was published in 1994. +It was used as the basis for UNIX 95 certification. +The following three refer to parts of it. +.Pp +.It \-xsh4.2 +.St -xsh4.2 +.Pp +.It \-xcurses4.2 +.St -xcurses4.2 +.Pp +.It \-p1003.1g-2000 +.St -p1003.1g-2000 +.br +Networking APIs, including sockets. +.Pp +.It \-svid4 +.St -svid4 , +.br +Published in 1995. +.El +.It Single UNIX Specification version 2 and related standards +.Pp +.Bl -tag -width "-p1003.1g-2000" -compact +.It \-susv2 +.St -susv2 +This Standard was published in 1997 +and is also called X/Open Portability Guide version 5. +It was used as the basis for UNIX 98 certification. +The following refer to parts of it. +.Pp +.It \-xbd5 +.St -xbd5 +.Pp +.It \-xsh5 +.St -xsh5 +.Pp +.It \-xcu5 +.St -xcu5 +.Pp +.It \-xns5 +.St -xns5 +.It \-xns5.2 +.St -xns5.2 +.El +.It Single UNIX Specification version 3 +.Pp +.Bl -tag -width "-p1003.1-2001" -compact +.It \-p1003.1-2001 +.St -p1003.1-2001 +.It \-susv3 +.St -susv3 +.br +This standard is based on C99, SUSv2, POSIX.1-1996, 1d, and 1j. +It is also called X/Open Portability Guide version 6. +It is used as the basis for UNIX 03 certification. +.Pp +.It \-p1003.1-2004 +.St -p1003.1-2004 +.br +The second and last Technical Corrigendum. +.El +.It Single UNIX Specification version 4 +.Pp +.Bl -tag -width "-p1003.1g-2000" -compact +.It \-p1003.1-2008 +.St -p1003.1-2008 +.It \-susv4 +.St -susv4 +.br +This standard is also called +X/Open Portability Guide version 7. +.Pp +.It \-p1003.1-2013 +.St -p1003.1-2013 +.br +This is the first Technical Corrigendum. +.El +.It Other standards +.Pp +.Bl -tag -width "-p1003.1g-2000" -compact +.It \-ieee754 +.St -ieee754 +.br +Floating-point arithmetic. +.Pp +.It \-iso8601 +.St -iso8601 +.br +Representation of dates and times, published in 1988. +.Pp +.It \-iso8802-3 +.St -iso8802-3 +.br +Ethernet local area networks. +.Pp +.It \-ieee1275-94 +.St -ieee1275-94 +.El +.El +.Ss \&Sx +Reference a section or subsection in the same manual page. +The referenced section or subsection name must be identical to the +enclosed argument, including whitespace. +.Pp +Examples: +.Dl \&.Sx MANUAL STRUCTURE +.Pp +See also +.Sx \&Sh +and +.Sx \&Ss . +.Ss \&Sy +Request a boldface font. +.Pp +This is most often used to indicate importance or seriousness (not to be +confused with stress emphasis, see +.Sx \&Em ) . +When none of the semantic macros fit, it is also adequate for syntax +elements that have to be given or that appear verbatim. +.Pp +Examples: +.Bd -literal -compact -offset indent +\&.Sy Warning : +If +\&.Sy s +appears in the owner permissions, set-user-ID mode is set. +This utility replaces the former +\&.Sy dumpdir +program. +.Ed +.Pp +See also +.Sx \&Bf , +.Sx \&Em , +.Sx \&Li , +and +.Sx \&No . +.Ss \&Ta +Table cell separator in +.Sx \&Bl Fl column +lists; can only be used below +.Sx \&It . +.Ss \&Tn +Supported only for compatibility, do not use this in new manuals. +Even though the macro name +.Pq Dq tradename +suggests a semantic function, historic usage is inconsistent, mostly +using it as a presentation-level macro to request a small caps font. +.Ss \&Ud +Supported only for compatibility, do not use this in new manuals. +Prints out +.Dq currently under development. +.Ss \&Ux +Supported only for compatibility, do not use this in new manuals. +Prints out +.Dq Ux . +.Ss \&Va +A variable name. +.Pp +Examples: +.Dl \&.Va foo +.Dl \&.Va const char *bar ; +.Pp +For function arguments and parameters, use +.Sx \&Fa +instead. +For declarations of global variables in the +.Em SYNOPSIS +section, use +.Sx \&Vt . +.Ss \&Vt +A variable type. +.Pp +This is also used for indicating global variables in the +.Em SYNOPSIS +section, in which case a variable name is also specified. +Note that it accepts +.Sx Block partial-implicit +syntax when invoked as the first macro on an input line in the +.Em SYNOPSIS +section, else it accepts ordinary +.Sx In-line +syntax. +In the former case, this macro starts a new output line, +and a blank line is inserted in front if there is a preceding +function definition or include directive. +.Pp +Examples: +.Dl \&.Vt unsigned char +.Dl \&.Vt extern const char * const sys_signame[] \&; +.Pp +For parameters in function prototypes, use +.Sx \&Fa +instead, for function return types +.Sx \&Ft , +and for variable names outside the +.Em SYNOPSIS +section +.Sx \&Va , +even when including a type with the name. +See also +.Sx MANUAL STRUCTURE . +.Ss \&Xc +Close a scope opened by +.Sx \&Xo . +.Ss \&Xo +Extend the header of an +.Sx \&It +macro or the body of a partial-implicit block macro +beyond the end of the input line. +This macro originally existed to work around the 9-argument limit +of historic +.Xr roff 7 . +.Ss \&Xr +Link to another manual +.Pq Qq cross-reference . +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Xr Ar name Op section +.Pp +Cross reference the +.Ar name +and +.Ar section +number of another man page; +omitting the section number is rarely useful. +.Pp +Examples: +.Dl \&.Xr mandoc 1 +.Dl \&.Xr mandoc 1 \&; +.Dl \&.Xr mandoc 1 \&Ns s behaviour +.Ss \&br +Emits a line-break. +This macro should not be used; it is implemented for compatibility with +historical manuals. +.Pp +Consider using +.Sx \&Pp +in the event of natural paragraph breaks. +.Ss \&sp +Emits vertical space. +This macro should not be used; it is implemented for compatibility with +historical manuals. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&sp Op Ar height +.Pp +The +.Ar height +argument is a scaling width as described in +.Xr roff 7 . +If unspecified, +.Sx \&sp +asserts a single vertical space. +.Sh MACRO SYNTAX +The syntax of a macro depends on its classification. +In this section, +.Sq \-arg +refers to macro arguments, which may be followed by zero or more +.Sq parm +parameters; +.Sq \&Yo +opens the scope of a macro; and if specified, +.Sq \&Yc +closes it out. +.Pp +The +.Em Callable +column indicates that the macro may also be called by passing its name +as an argument to another macro. +For example, +.Sq \&.Op \&Fl O \&Ar file +produces +.Sq Op Fl O Ar file . +To prevent a macro call and render the macro name literally, +escape it by prepending a zero-width space, +.Sq \e& . +For example, +.Sq \&Op \e&Fl O +produces +.Sq Op \&Fl O . +If a macro is not callable but its name appears as an argument +to another macro, it is interpreted as opaque text. +For example, +.Sq \&.Fl \&Sh +produces +.Sq Fl \&Sh . +.Pp +The +.Em Parsed +column indicates whether the macro may call other macros by receiving +their names as arguments. +If a macro is not parsed but the name of another macro appears +as an argument, it is interpreted as opaque text. +.Pp +The +.Em Scope +column, if applicable, describes closure rules. +.Ss Block full-explicit +Multi-line scope closed by an explicit closing macro. +All macros contains bodies; only +.Sx \&Bf +and +.Pq optionally +.Sx \&Bl +contain a head. +.Bd -literal -offset indent +\&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead...\(rB +\(lBbody...\(rB +\&.Yc +.Ed +.Bl -column "MacroX" "CallableX" "ParsedX" "closed by XXX" -offset indent +.It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope +.It Sx \&Bd Ta \&No Ta \&No Ta closed by Sx \&Ed +.It Sx \&Bf Ta \&No Ta \&No Ta closed by Sx \&Ef +.It Sx \&Bk Ta \&No Ta \&No Ta closed by Sx \&Ek +.It Sx \&Bl Ta \&No Ta \&No Ta closed by Sx \&El +.It Sx \&Ed Ta \&No Ta \&No Ta opened by Sx \&Bd +.It Sx \&Ef Ta \&No Ta \&No Ta opened by Sx \&Bf +.It Sx \&Ek Ta \&No Ta \&No Ta opened by Sx \&Bk +.It Sx \&El Ta \&No Ta \&No Ta opened by Sx \&Bl +.El +.Ss Block full-implicit +Multi-line scope closed by end-of-file or implicitly by another macro. +All macros have bodies; some +.Po +.Sx \&It Fl bullet , +.Fl hyphen , +.Fl dash , +.Fl enum , +.Fl item +.Pc +don't have heads; only one +.Po +.Sx \&It +in +.Sx \&Bl Fl column +.Pc +has multiple heads. +.Bd -literal -offset indent +\&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead... \(lBTa head...\(rB\(rB +\(lBbody...\(rB +.Ed +.Bl -column "MacroX" "CallableX" "ParsedX" "closed by XXXXXXXXXXX" -offset indent +.It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope +.It Sx \&It Ta \&No Ta Yes Ta closed by Sx \&It , Sx \&El +.It Sx \&Nd Ta \&No Ta \&No Ta closed by Sx \&Sh +.It Sx \&Nm Ta \&No Ta Yes Ta closed by Sx \&Nm , Sx \&Sh , Sx \&Ss +.It Sx \&Sh Ta \&No Ta Yes Ta closed by Sx \&Sh +.It Sx \&Ss Ta \&No Ta Yes Ta closed by Sx \&Sh , Sx \&Ss +.El +.Pp +Note that the +.Sx \&Nm +macro is a +.Sx Block full-implicit +macro only when invoked as the first macro +in a +.Em SYNOPSIS +section line, else it is +.Sx In-line . +.Ss Block partial-explicit +Like block full-explicit, but also with single-line scope. +Each has at least a body and, in limited circumstances, a head +.Po +.Sx \&Fo , +.Sx \&Eo +.Pc +and/or tail +.Pq Sx \&Ec . +.Bd -literal -offset indent +\&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead...\(rB +\(lBbody...\(rB +\&.Yc \(lBtail...\(rB + +\&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead...\(rB \ +\(lBbody...\(rB \&Yc \(lBtail...\(rB +.Ed +.Bl -column "MacroX" "CallableX" "ParsedX" "closed by XXXX" -offset indent +.It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope +.It Sx \&Ac Ta Yes Ta Yes Ta opened by Sx \&Ao +.It Sx \&Ao Ta Yes Ta Yes Ta closed by Sx \&Ac +.It Sx \&Bc Ta Yes Ta Yes Ta closed by Sx \&Bo +.It Sx \&Bo Ta Yes Ta Yes Ta opened by Sx \&Bc +.It Sx \&Brc Ta Yes Ta Yes Ta opened by Sx \&Bro +.It Sx \&Bro Ta Yes Ta Yes Ta closed by Sx \&Brc +.It Sx \&Dc Ta Yes Ta Yes Ta opened by Sx \&Do +.It Sx \&Do Ta Yes Ta Yes Ta closed by Sx \&Dc +.It Sx \&Ec Ta Yes Ta Yes Ta opened by Sx \&Eo +.It Sx \&Eo Ta Yes Ta Yes Ta closed by Sx \&Ec +.It Sx \&Fc Ta Yes Ta Yes Ta opened by Sx \&Fo +.It Sx \&Fo Ta \&No Ta \&No Ta closed by Sx \&Fc +.It Sx \&Oc Ta Yes Ta Yes Ta closed by Sx \&Oo +.It Sx \&Oo Ta Yes Ta Yes Ta opened by Sx \&Oc +.It Sx \&Pc Ta Yes Ta Yes Ta closed by Sx \&Po +.It Sx \&Po Ta Yes Ta Yes Ta opened by Sx \&Pc +.It Sx \&Qc Ta Yes Ta Yes Ta opened by Sx \&Oo +.It Sx \&Qo Ta Yes Ta Yes Ta closed by Sx \&Oc +.It Sx \&Re Ta \&No Ta \&No Ta opened by Sx \&Rs +.It Sx \&Rs Ta \&No Ta \&No Ta closed by Sx \&Re +.It Sx \&Sc Ta Yes Ta Yes Ta opened by Sx \&So +.It Sx \&So Ta Yes Ta Yes Ta closed by Sx \&Sc +.It Sx \&Xc Ta Yes Ta Yes Ta opened by Sx \&Xo +.It Sx \&Xo Ta Yes Ta Yes Ta closed by Sx \&Xc +.El +.Ss Block partial-implicit +Like block full-implicit, but with single-line scope closed by the +end of the line. +.Bd -literal -offset indent +\&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBbody...\(rB \(lBres...\(rB +.Ed +.Bl -column "MacroX" "CallableX" "ParsedX" -offset indent +.It Em Macro Ta Em Callable Ta Em Parsed +.It Sx \&Aq Ta Yes Ta Yes +.It Sx \&Bq Ta Yes Ta Yes +.It Sx \&Brq Ta Yes Ta Yes +.It Sx \&D1 Ta \&No Ta \&Yes +.It Sx \&Dl Ta \&No Ta Yes +.It Sx \&Dq Ta Yes Ta Yes +.It Sx \&En Ta Yes Ta Yes +.It Sx \&Op Ta Yes Ta Yes +.It Sx \&Pq Ta Yes Ta Yes +.It Sx \&Ql Ta Yes Ta Yes +.It Sx \&Qq Ta Yes Ta Yes +.It Sx \&Sq Ta Yes Ta Yes +.It Sx \&Vt Ta Yes Ta Yes +.El +.Pp +Note that the +.Sx \&Vt +macro is a +.Sx Block partial-implicit +only when invoked as the first macro +in a +.Em SYNOPSIS +section line, else it is +.Sx In-line . +.Ss Special block macro +The +.Sx \&Ta +macro can only be used below +.Sx \&It +in +.Sx \&Bl Fl column +lists. +It delimits blocks representing table cells; +these blocks have bodies, but no heads. +.Bl -column "MacroX" "CallableX" "ParsedX" "closed by XXXX" -offset indent +.It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope +.It Sx \&Ta Ta Yes Ta Yes Ta closed by Sx \&Ta , Sx \&It +.El +.Ss In-line +Closed by the end of the line, fixed argument lengths, +and/or subsequent macros. +In-line macros have only text children. +If a number (or inequality) of arguments is +.Pq n , +then the macro accepts an arbitrary number of arguments. +.Bd -literal -offset indent +\&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBargs...\(rB \(lBres...\(rB + +\&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBargs...\(rB Yc... + +\&.Yo \(lB\-arg \(lBval...\(rB\(rB arg0 arg1 argN +.Ed +.Bl -column "MacroX" "CallableX" "ParsedX" "Arguments" -offset indent +.It Em Macro Ta Em Callable Ta Em Parsed Ta Em Arguments +.It Sx \&%A Ta \&No Ta \&No Ta >0 +.It Sx \&%B Ta \&No Ta \&No Ta >0 +.It Sx \&%C Ta \&No Ta \&No Ta >0 +.It Sx \&%D Ta \&No Ta \&No Ta >0 +.It Sx \&%I Ta \&No Ta \&No Ta >0 +.It Sx \&%J Ta \&No Ta \&No Ta >0 +.It Sx \&%N Ta \&No Ta \&No Ta >0 +.It Sx \&%O Ta \&No Ta \&No Ta >0 +.It Sx \&%P Ta \&No Ta \&No Ta >0 +.It Sx \&%Q Ta \&No Ta \&No Ta >0 +.It Sx \&%R Ta \&No Ta \&No Ta >0 +.It Sx \&%T Ta \&No Ta \&No Ta >0 +.It Sx \&%U Ta \&No Ta \&No Ta >0 +.It Sx \&%V Ta \&No Ta \&No Ta >0 +.It Sx \&Ad Ta Yes Ta Yes Ta >0 +.It Sx \&An Ta Yes Ta Yes Ta >0 +.It Sx \&Ap Ta Yes Ta Yes Ta 0 +.It Sx \&Ar Ta Yes Ta Yes Ta n +.It Sx \&At Ta Yes Ta Yes Ta 1 +.It Sx \&Bsx Ta Yes Ta Yes Ta n +.It Sx \&Bt Ta \&No Ta \&No Ta 0 +.It Sx \&Bx Ta Yes Ta Yes Ta n +.It Sx \&Cd Ta Yes Ta Yes Ta >0 +.It Sx \&Cm Ta Yes Ta Yes Ta >0 +.It Sx \&Db Ta \&No Ta \&No Ta 1 +.It Sx \&Dd Ta \&No Ta \&No Ta n +.It Sx \&Dt Ta \&No Ta \&No Ta n +.It Sx \&Dv Ta Yes Ta Yes Ta >0 +.It Sx \&Dx Ta Yes Ta Yes Ta n +.It Sx \&Em Ta Yes Ta Yes Ta >0 +.It Sx \&Er Ta Yes Ta Yes Ta >0 +.It Sx \&Es Ta Yes Ta Yes Ta 2 +.It Sx \&Ev Ta Yes Ta Yes Ta >0 +.It Sx \&Ex Ta \&No Ta \&No Ta n +.It Sx \&Fa Ta Yes Ta Yes Ta >0 +.It Sx \&Fd Ta \&No Ta \&No Ta >0 +.It Sx \&Fl Ta Yes Ta Yes Ta n +.It Sx \&Fn Ta Yes Ta Yes Ta >0 +.It Sx \&Fr Ta Yes Ta Yes Ta >0 +.It Sx \&Ft Ta Yes Ta Yes Ta >0 +.It Sx \&Fx Ta Yes Ta Yes Ta n +.It Sx \&Hf Ta \&No Ta \&No Ta n +.It Sx \&Ic Ta Yes Ta Yes Ta >0 +.It Sx \&In Ta \&No Ta \&No Ta 1 +.It Sx \&Lb Ta \&No Ta \&No Ta 1 +.It Sx \&Li Ta Yes Ta Yes Ta >0 +.It Sx \&Lk Ta Yes Ta Yes Ta >0 +.It Sx \&Lp Ta \&No Ta \&No Ta 0 +.It Sx \&Ms Ta Yes Ta Yes Ta >0 +.It Sx \&Mt Ta Yes Ta Yes Ta >0 +.It Sx \&Nm Ta Yes Ta Yes Ta n +.It Sx \&No Ta Yes Ta Yes Ta 0 +.It Sx \&Ns Ta Yes Ta Yes Ta 0 +.It Sx \&Nx Ta Yes Ta Yes Ta n +.It Sx \&Os Ta \&No Ta \&No Ta n +.It Sx \&Ot Ta Yes Ta Yes Ta >0 +.It Sx \&Ox Ta Yes Ta Yes Ta n +.It Sx \&Pa Ta Yes Ta Yes Ta n +.It Sx \&Pf Ta Yes Ta Yes Ta 1 +.It Sx \&Pp Ta \&No Ta \&No Ta 0 +.It Sx \&Rv Ta \&No Ta \&No Ta n +.It Sx \&Sm Ta \&No Ta \&No Ta <2 +.It Sx \&St Ta \&No Ta Yes Ta 1 +.It Sx \&Sx Ta Yes Ta Yes Ta >0 +.It Sx \&Sy Ta Yes Ta Yes Ta >0 +.It Sx \&Tn Ta Yes Ta Yes Ta >0 +.It Sx \&Ud Ta \&No Ta \&No Ta 0 +.It Sx \&Ux Ta Yes Ta Yes Ta n +.It Sx \&Va Ta Yes Ta Yes Ta n +.It Sx \&Vt Ta Yes Ta Yes Ta >0 +.It Sx \&Xr Ta Yes Ta Yes Ta >0 +.It Sx \&br Ta \&No Ta \&No Ta 0 +.It Sx \&sp Ta \&No Ta \&No Ta 1 +.El +.Ss Delimiters +When a macro argument consists of one single input character +considered as a delimiter, the argument gets special handling. +This does not apply when delimiters appear in arguments containing +more than one character. +Consequently, to prevent special handling and just handle it +like any other argument, a delimiter can be escaped by prepending +a zero-width space +.Pq Sq \e& . +In text lines, delimiters never need escaping, but may be used +as normal punctuation. +.Pp +For many macros, when the leading arguments are opening delimiters, +these delimiters are put before the macro scope, +and when the trailing arguments are closing delimiters, +these delimiters are put after the macro scope. +For example, +.Pp +.D1 Pf \. \&Aq "( [ word ] ) ." +.Pp +renders as: +.Pp +.D1 Aq ( [ word ] ) . +.Pp +Opening delimiters are: +.Pp +.Bl -tag -width Ds -offset indent -compact +.It \&( +left parenthesis +.It \&[ +left bracket +.El +.Pp +Closing delimiters are: +.Pp +.Bl -tag -width Ds -offset indent -compact +.It \&. +period +.It \&, +comma +.It \&: +colon +.It \&; +semicolon +.It \&) +right parenthesis +.It \&] +right bracket +.It \&? +question mark +.It \&! +exclamation mark +.El +.Pp +Note that even a period preceded by a backslash +.Pq Sq \e.\& +gets this special handling; use +.Sq \e&. +to prevent that. +.Pp +Many in-line macros interrupt their scope when they encounter +delimiters, and resume their scope when more arguments follow that +are not delimiters. +For example, +.Pp +.D1 Pf \. \&Fl "a ( b | c \e*(Ba d ) e" +.Pp +renders as: +.Pp +.D1 Fl a ( b | c \*(Ba d ) e +.Pp +This applies to both opening and closing delimiters, +and also to the middle delimiter: +.Pp +.Bl -tag -width Ds -offset indent -compact +.It \&| +vertical bar +.El +.Pp +As a special case, the predefined string \e*(Ba is handled and rendered +in the same way as a plain +.Sq \&| +character. +Using this predefined string is not recommended in new manuals. +.Ss Font handling +In +.Nm +documents, usage of semantic markup is recommended in order to have +proper fonts automatically selected; only when no fitting semantic markup +is available, consider falling back to +.Sx Physical markup +macros. +Whenever any +.Nm +macro switches the +.Xr roff 7 +font mode, it will automatically restore the previous font when exiting +its scope. +Manually switching the font using the +.Xr roff 7 +.Ql \ef +font escape sequences is never required. +.Sh COMPATIBILITY +This section provides an incomplete list of compatibility issues +between mandoc and GNU troff +.Pq Qq groff . +.Pp +The following problematic behaviour is found in groff: +.Pp +.Bl -dash -compact +.It +.Sx \&Dd +with non-standard arguments behaves very strangely. +When there are three arguments, they are printed verbatim. +Any other number of arguments is replaced by the current date, +but without any arguments the string +.Dq Epoch +is printed. +.It +.Sx \&Lk +only accepts a single link-name argument; the remainder is misformatted. +.It +.Sx \&Pa +does not format its arguments when used in the FILES section under +certain list types. +.It +.Sx \&Ta +can only be called by other macros, but not at the beginning of a line. +.It +.Sx \&%C +is not implemented (up to and including groff-1.22.2). +.It +.Sq \ef +.Pq font face +and +.Sq \eF +.Pq font family face +.Sx Text Decoration +escapes behave irregularly when specified within line-macro scopes. +.It +Negative scaling units return to prior lines. +Instead, mandoc truncates them to zero. +.El +.Pp +The following features are unimplemented in mandoc: +.Pp +.Bl -dash -compact +.It +.Sx \&Bd +.Fl file Ar file +is unsupported for security reasons. +.It +.Sx \&Bd +.Fl filled +does not adjust the right margin, but is an alias for +.Sx \&Bd +.Fl ragged . +.It +.Sx \&Bd +.Fl literal +does not use a literal font, but is an alias for +.Sx \&Bd +.Fl unfilled . +.It +.Sx \&Bd +.Fl offset Cm center +and +.Fl offset Cm right +don't work. +Groff does not implement centered and flush-right rendering either, +but produces large indentations. +.El +.Sh SEE ALSO +.Xr man 1 , +.Xr mandoc 1 , +.Xr eqn 7 , +.Xr man 7 , +.Xr mandoc_char 7 , +.Xr roff 7 , +.Xr tbl 7 +.Sh HISTORY +The +.Nm +language first appeared as a troff macro package in +.Bx 4.4 . +It was later significantly updated by Werner Lemberg and Ruslan Ermilov +in groff-1.17. +The standalone implementation that is part of the +.Xr mandoc 1 +utility written by Kristaps Dzonsons appeared in +.Ox 4.6 . +.Sh AUTHORS +The +.Nm +reference was written by +.An Kristaps Dzonsons Aq Mt kristaps@bsd.lv . |
