diff options
Diffstat (limited to 'contrib/llvm/lib/Target/X86/MCTargetDesc/X86BaseInfo.h')
| -rw-r--r-- | contrib/llvm/lib/Target/X86/MCTargetDesc/X86BaseInfo.h | 548 |
1 files changed, 548 insertions, 0 deletions
diff --git a/contrib/llvm/lib/Target/X86/MCTargetDesc/X86BaseInfo.h b/contrib/llvm/lib/Target/X86/MCTargetDesc/X86BaseInfo.h new file mode 100644 index 0000000..e6ba705 --- /dev/null +++ b/contrib/llvm/lib/Target/X86/MCTargetDesc/X86BaseInfo.h @@ -0,0 +1,548 @@ +//===-- X86BaseInfo.h - Top level definitions for X86 -------- --*- C++ -*-===// +// +// The LLVM Compiler Infrastructure +// +// This file is distributed under the University of Illinois Open Source +// License. See LICENSE.TXT for details. +// +//===----------------------------------------------------------------------===// +// +// This file contains small standalone helper functions and enum definitions for +// the X86 target useful for the compiler back-end and the MC libraries. +// As such, it deliberately does not include references to LLVM core +// code gen types, passes, etc.. +// +//===----------------------------------------------------------------------===// + +#ifndef X86BASEINFO_H +#define X86BASEINFO_H + +#include "X86MCTargetDesc.h" +#include "llvm/Support/DataTypes.h" +#include <cassert> + +namespace llvm { + +namespace X86 { + // Enums for memory operand decoding. Each memory operand is represented with + // a 5 operand sequence in the form: + // [BaseReg, ScaleAmt, IndexReg, Disp, Segment] + // These enums help decode this. + enum { + AddrBaseReg = 0, + AddrScaleAmt = 1, + AddrIndexReg = 2, + AddrDisp = 3, + + /// AddrSegmentReg - The operand # of the segment in the memory operand. + AddrSegmentReg = 4, + + /// AddrNumOperands - Total number of operands in a memory reference. + AddrNumOperands = 5 + }; +} // end namespace X86; + + +/// X86II - This namespace holds all of the target specific flags that +/// instruction info tracks. +/// +namespace X86II { + /// Target Operand Flag enum. + enum TOF { + //===------------------------------------------------------------------===// + // X86 Specific MachineOperand flags. + + MO_NO_FLAG, + + /// MO_GOT_ABSOLUTE_ADDRESS - On a symbol operand, this represents a + /// relocation of: + /// SYMBOL_LABEL + [. - PICBASELABEL] + MO_GOT_ABSOLUTE_ADDRESS, + + /// MO_PIC_BASE_OFFSET - On a symbol operand this indicates that the + /// immediate should get the value of the symbol minus the PIC base label: + /// SYMBOL_LABEL - PICBASELABEL + MO_PIC_BASE_OFFSET, + + /// MO_GOT - On a symbol operand this indicates that the immediate is the + /// offset to the GOT entry for the symbol name from the base of the GOT. + /// + /// See the X86-64 ELF ABI supplement for more details. + /// SYMBOL_LABEL @GOT + MO_GOT, + + /// MO_GOTOFF - On a symbol operand this indicates that the immediate is + /// the offset to the location of the symbol name from the base of the GOT. + /// + /// See the X86-64 ELF ABI supplement for more details. + /// SYMBOL_LABEL @GOTOFF + MO_GOTOFF, + + /// MO_GOTPCREL - On a symbol operand this indicates that the immediate is + /// offset to the GOT entry for the symbol name from the current code + /// location. + /// + /// See the X86-64 ELF ABI supplement for more details. + /// SYMBOL_LABEL @GOTPCREL + MO_GOTPCREL, + + /// MO_PLT - On a symbol operand this indicates that the immediate is + /// offset to the PLT entry of symbol name from the current code location. + /// + /// See the X86-64 ELF ABI supplement for more details. + /// SYMBOL_LABEL @PLT + MO_PLT, + + /// MO_TLSGD - On a symbol operand this indicates that the immediate is + /// some TLS offset. + /// + /// See 'ELF Handling for Thread-Local Storage' for more details. + /// SYMBOL_LABEL @TLSGD + MO_TLSGD, + + /// MO_GOTTPOFF - On a symbol operand this indicates that the immediate is + /// some TLS offset. + /// + /// See 'ELF Handling for Thread-Local Storage' for more details. + /// SYMBOL_LABEL @GOTTPOFF + MO_GOTTPOFF, + + /// MO_INDNTPOFF - On a symbol operand this indicates that the immediate is + /// some TLS offset. + /// + /// See 'ELF Handling for Thread-Local Storage' for more details. + /// SYMBOL_LABEL @INDNTPOFF + MO_INDNTPOFF, + + /// MO_TPOFF - On a symbol operand this indicates that the immediate is + /// some TLS offset. + /// + /// See 'ELF Handling for Thread-Local Storage' for more details. + /// SYMBOL_LABEL @TPOFF + MO_TPOFF, + + /// MO_NTPOFF - On a symbol operand this indicates that the immediate is + /// some TLS offset. + /// + /// See 'ELF Handling for Thread-Local Storage' for more details. + /// SYMBOL_LABEL @NTPOFF + MO_NTPOFF, + + /// MO_DLLIMPORT - On a symbol operand "FOO", this indicates that the + /// reference is actually to the "__imp_FOO" symbol. This is used for + /// dllimport linkage on windows. + MO_DLLIMPORT, + + /// MO_DARWIN_STUB - On a symbol operand "FOO", this indicates that the + /// reference is actually to the "FOO$stub" symbol. This is used for calls + /// and jumps to external functions on Tiger and earlier. + MO_DARWIN_STUB, + + /// MO_DARWIN_NONLAZY - On a symbol operand "FOO", this indicates that the + /// reference is actually to the "FOO$non_lazy_ptr" symbol, which is a + /// non-PIC-base-relative reference to a non-hidden dyld lazy pointer stub. + MO_DARWIN_NONLAZY, + + /// MO_DARWIN_NONLAZY_PIC_BASE - On a symbol operand "FOO", this indicates + /// that the reference is actually to "FOO$non_lazy_ptr - PICBASE", which is + /// a PIC-base-relative reference to a non-hidden dyld lazy pointer stub. + MO_DARWIN_NONLAZY_PIC_BASE, + + /// MO_DARWIN_HIDDEN_NONLAZY_PIC_BASE - On a symbol operand "FOO", this + /// indicates that the reference is actually to "FOO$non_lazy_ptr -PICBASE", + /// which is a PIC-base-relative reference to a hidden dyld lazy pointer + /// stub. + MO_DARWIN_HIDDEN_NONLAZY_PIC_BASE, + + /// MO_TLVP - On a symbol operand this indicates that the immediate is + /// some TLS offset. + /// + /// This is the TLS offset for the Darwin TLS mechanism. + MO_TLVP, + + /// MO_TLVP_PIC_BASE - On a symbol operand this indicates that the immediate + /// is some TLS offset from the picbase. + /// + /// This is the 32-bit TLS offset for Darwin TLS in PIC mode. + MO_TLVP_PIC_BASE + }; + + enum { + //===------------------------------------------------------------------===// + // Instruction encodings. These are the standard/most common forms for X86 + // instructions. + // + + // PseudoFrm - This represents an instruction that is a pseudo instruction + // or one that has not been implemented yet. It is illegal to code generate + // it, but tolerated for intermediate implementation stages. + Pseudo = 0, + + /// Raw - This form is for instructions that don't have any operands, so + /// they are just a fixed opcode value, like 'leave'. + RawFrm = 1, + + /// AddRegFrm - This form is used for instructions like 'push r32' that have + /// their one register operand added to their opcode. + AddRegFrm = 2, + + /// MRMDestReg - This form is used for instructions that use the Mod/RM byte + /// to specify a destination, which in this case is a register. + /// + MRMDestReg = 3, + + /// MRMDestMem - This form is used for instructions that use the Mod/RM byte + /// to specify a destination, which in this case is memory. + /// + MRMDestMem = 4, + + /// MRMSrcReg - This form is used for instructions that use the Mod/RM byte + /// to specify a source, which in this case is a register. + /// + MRMSrcReg = 5, + + /// MRMSrcMem - This form is used for instructions that use the Mod/RM byte + /// to specify a source, which in this case is memory. + /// + MRMSrcMem = 6, + + /// MRM[0-7][rm] - These forms are used to represent instructions that use + /// a Mod/RM byte, and use the middle field to hold extended opcode + /// information. In the intel manual these are represented as /0, /1, ... + /// + + // First, instructions that operate on a register r/m operand... + MRM0r = 16, MRM1r = 17, MRM2r = 18, MRM3r = 19, // Format /0 /1 /2 /3 + MRM4r = 20, MRM5r = 21, MRM6r = 22, MRM7r = 23, // Format /4 /5 /6 /7 + + // Next, instructions that operate on a memory r/m operand... + MRM0m = 24, MRM1m = 25, MRM2m = 26, MRM3m = 27, // Format /0 /1 /2 /3 + MRM4m = 28, MRM5m = 29, MRM6m = 30, MRM7m = 31, // Format /4 /5 /6 /7 + + // MRMInitReg - This form is used for instructions whose source and + // destinations are the same register. + MRMInitReg = 32, + + //// MRM_C1 - A mod/rm byte of exactly 0xC1. + MRM_C1 = 33, + MRM_C2 = 34, + MRM_C3 = 35, + MRM_C4 = 36, + MRM_C8 = 37, + MRM_C9 = 38, + MRM_E8 = 39, + MRM_F0 = 40, + MRM_F8 = 41, + MRM_F9 = 42, + MRM_D0 = 45, + MRM_D1 = 46, + + /// RawFrmImm8 - This is used for the ENTER instruction, which has two + /// immediates, the first of which is a 16-bit immediate (specified by + /// the imm encoding) and the second is a 8-bit fixed value. + RawFrmImm8 = 43, + + /// RawFrmImm16 - This is used for CALL FAR instructions, which have two + /// immediates, the first of which is a 16 or 32-bit immediate (specified by + /// the imm encoding) and the second is a 16-bit fixed value. In the AMD + /// manual, this operand is described as pntr16:32 and pntr16:16 + RawFrmImm16 = 44, + + FormMask = 63, + + //===------------------------------------------------------------------===// + // Actual flags... + + // OpSize - Set if this instruction requires an operand size prefix (0x66), + // which most often indicates that the instruction operates on 16 bit data + // instead of 32 bit data. + OpSize = 1 << 6, + + // AsSize - Set if this instruction requires an operand size prefix (0x67), + // which most often indicates that the instruction address 16 bit address + // instead of 32 bit address (or 32 bit address in 64 bit mode). + AdSize = 1 << 7, + + //===------------------------------------------------------------------===// + // Op0Mask - There are several prefix bytes that are used to form two byte + // opcodes. These are currently 0x0F, 0xF3, and 0xD8-0xDF. This mask is + // used to obtain the setting of this field. If no bits in this field is + // set, there is no prefix byte for obtaining a multibyte opcode. + // + Op0Shift = 8, + Op0Mask = 0x1F << Op0Shift, + + // TB - TwoByte - Set if this instruction has a two byte opcode, which + // starts with a 0x0F byte before the real opcode. + TB = 1 << Op0Shift, + + // REP - The 0xF3 prefix byte indicating repetition of the following + // instruction. + REP = 2 << Op0Shift, + + // D8-DF - These escape opcodes are used by the floating point unit. These + // values must remain sequential. + D8 = 3 << Op0Shift, D9 = 4 << Op0Shift, + DA = 5 << Op0Shift, DB = 6 << Op0Shift, + DC = 7 << Op0Shift, DD = 8 << Op0Shift, + DE = 9 << Op0Shift, DF = 10 << Op0Shift, + + // XS, XD - These prefix codes are for single and double precision scalar + // floating point operations performed in the SSE registers. + XD = 11 << Op0Shift, XS = 12 << Op0Shift, + + // T8, TA, A6, A7 - Prefix after the 0x0F prefix. + T8 = 13 << Op0Shift, TA = 14 << Op0Shift, + A6 = 15 << Op0Shift, A7 = 16 << Op0Shift, + + // TF - Prefix before and after 0x0F + TF = 17 << Op0Shift, + + //===------------------------------------------------------------------===// + // REX_W - REX prefixes are instruction prefixes used in 64-bit mode. + // They are used to specify GPRs and SSE registers, 64-bit operand size, + // etc. We only cares about REX.W and REX.R bits and only the former is + // statically determined. + // + REXShift = Op0Shift + 5, + REX_W = 1 << REXShift, + + //===------------------------------------------------------------------===// + // This three-bit field describes the size of an immediate operand. Zero is + // unused so that we can tell if we forgot to set a value. + ImmShift = REXShift + 1, + ImmMask = 7 << ImmShift, + Imm8 = 1 << ImmShift, + Imm8PCRel = 2 << ImmShift, + Imm16 = 3 << ImmShift, + Imm16PCRel = 4 << ImmShift, + Imm32 = 5 << ImmShift, + Imm32PCRel = 6 << ImmShift, + Imm64 = 7 << ImmShift, + + //===------------------------------------------------------------------===// + // FP Instruction Classification... Zero is non-fp instruction. + + // FPTypeMask - Mask for all of the FP types... + FPTypeShift = ImmShift + 3, + FPTypeMask = 7 << FPTypeShift, + + // NotFP - The default, set for instructions that do not use FP registers. + NotFP = 0 << FPTypeShift, + + // ZeroArgFP - 0 arg FP instruction which implicitly pushes ST(0), f.e. fld0 + ZeroArgFP = 1 << FPTypeShift, + + // OneArgFP - 1 arg FP instructions which implicitly read ST(0), such as fst + OneArgFP = 2 << FPTypeShift, + + // OneArgFPRW - 1 arg FP instruction which implicitly read ST(0) and write a + // result back to ST(0). For example, fcos, fsqrt, etc. + // + OneArgFPRW = 3 << FPTypeShift, + + // TwoArgFP - 2 arg FP instructions which implicitly read ST(0), and an + // explicit argument, storing the result to either ST(0) or the implicit + // argument. For example: fadd, fsub, fmul, etc... + TwoArgFP = 4 << FPTypeShift, + + // CompareFP - 2 arg FP instructions which implicitly read ST(0) and an + // explicit argument, but have no destination. Example: fucom, fucomi, ... + CompareFP = 5 << FPTypeShift, + + // CondMovFP - "2 operand" floating point conditional move instructions. + CondMovFP = 6 << FPTypeShift, + + // SpecialFP - Special instruction forms. Dispatch by opcode explicitly. + SpecialFP = 7 << FPTypeShift, + + // Lock prefix + LOCKShift = FPTypeShift + 3, + LOCK = 1 << LOCKShift, + + // Segment override prefixes. Currently we just need ability to address + // stuff in gs and fs segments. + SegOvrShift = LOCKShift + 1, + SegOvrMask = 3 << SegOvrShift, + FS = 1 << SegOvrShift, + GS = 2 << SegOvrShift, + + // Execution domain for SSE instructions in bits 23, 24. + // 0 in bits 23-24 means normal, non-SSE instruction. + SSEDomainShift = SegOvrShift + 2, + + OpcodeShift = SSEDomainShift + 2, + + //===------------------------------------------------------------------===// + /// VEX - The opcode prefix used by AVX instructions + VEXShift = OpcodeShift + 8, + VEX = 1U << 0, + + /// VEX_W - Has a opcode specific functionality, but is used in the same + /// way as REX_W is for regular SSE instructions. + VEX_W = 1U << 1, + + /// VEX_4V - Used to specify an additional AVX/SSE register. Several 2 + /// address instructions in SSE are represented as 3 address ones in AVX + /// and the additional register is encoded in VEX_VVVV prefix. + VEX_4V = 1U << 2, + + /// VEX_I8IMM - Specifies that the last register used in a AVX instruction, + /// must be encoded in the i8 immediate field. This usually happens in + /// instructions with 4 operands. + VEX_I8IMM = 1U << 3, + + /// VEX_L - Stands for a bit in the VEX opcode prefix meaning the current + /// instruction uses 256-bit wide registers. This is usually auto detected + /// if a VR256 register is used, but some AVX instructions also have this + /// field marked when using a f256 memory references. + VEX_L = 1U << 4, + + // VEX_LIG - Specifies that this instruction ignores the L-bit in the VEX + // prefix. Usually used for scalar instructions. Needed by disassembler. + VEX_LIG = 1U << 5, + + /// Has3DNow0F0FOpcode - This flag indicates that the instruction uses the + /// wacky 0x0F 0x0F prefix for 3DNow! instructions. The manual documents + /// this as having a 0x0F prefix with a 0x0F opcode, and each instruction + /// storing a classifier in the imm8 field. To simplify our implementation, + /// we handle this by storeing the classifier in the opcode field and using + /// this flag to indicate that the encoder should do the wacky 3DNow! thing. + Has3DNow0F0FOpcode = 1U << 6 + }; + + // getBaseOpcodeFor - This function returns the "base" X86 opcode for the + // specified machine instruction. + // + static inline unsigned char getBaseOpcodeFor(uint64_t TSFlags) { + return TSFlags >> X86II::OpcodeShift; + } + + static inline bool hasImm(uint64_t TSFlags) { + return (TSFlags & X86II::ImmMask) != 0; + } + + /// getSizeOfImm - Decode the "size of immediate" field from the TSFlags field + /// of the specified instruction. + static inline unsigned getSizeOfImm(uint64_t TSFlags) { + switch (TSFlags & X86II::ImmMask) { + default: assert(0 && "Unknown immediate size"); + case X86II::Imm8: + case X86II::Imm8PCRel: return 1; + case X86II::Imm16: + case X86II::Imm16PCRel: return 2; + case X86II::Imm32: + case X86II::Imm32PCRel: return 4; + case X86II::Imm64: return 8; + } + } + + /// isImmPCRel - Return true if the immediate of the specified instruction's + /// TSFlags indicates that it is pc relative. + static inline unsigned isImmPCRel(uint64_t TSFlags) { + switch (TSFlags & X86II::ImmMask) { + default: assert(0 && "Unknown immediate size"); + case X86II::Imm8PCRel: + case X86II::Imm16PCRel: + case X86II::Imm32PCRel: + return true; + case X86II::Imm8: + case X86II::Imm16: + case X86II::Imm32: + case X86II::Imm64: + return false; + } + } + + /// getMemoryOperandNo - The function returns the MCInst operand # for the + /// first field of the memory operand. If the instruction doesn't have a + /// memory operand, this returns -1. + /// + /// Note that this ignores tied operands. If there is a tied register which + /// is duplicated in the MCInst (e.g. "EAX = addl EAX, [mem]") it is only + /// counted as one operand. + /// + static inline int getMemoryOperandNo(uint64_t TSFlags) { + switch (TSFlags & X86II::FormMask) { + case X86II::MRMInitReg: assert(0 && "FIXME: Remove this form"); + default: assert(0 && "Unknown FormMask value in getMemoryOperandNo!"); + case X86II::Pseudo: + case X86II::RawFrm: + case X86II::AddRegFrm: + case X86II::MRMDestReg: + case X86II::MRMSrcReg: + case X86II::RawFrmImm8: + case X86II::RawFrmImm16: + return -1; + case X86II::MRMDestMem: + return 0; + case X86II::MRMSrcMem: { + bool HasVEX_4V = (TSFlags >> X86II::VEXShift) & X86II::VEX_4V; + unsigned FirstMemOp = 1; + if (HasVEX_4V) + ++FirstMemOp;// Skip the register source (which is encoded in VEX_VVVV). + + // FIXME: Maybe lea should have its own form? This is a horrible hack. + //if (Opcode == X86::LEA64r || Opcode == X86::LEA64_32r || + // Opcode == X86::LEA16r || Opcode == X86::LEA32r) + return FirstMemOp; + } + case X86II::MRM0r: case X86II::MRM1r: + case X86II::MRM2r: case X86II::MRM3r: + case X86II::MRM4r: case X86II::MRM5r: + case X86II::MRM6r: case X86II::MRM7r: + return -1; + case X86II::MRM0m: case X86II::MRM1m: + case X86II::MRM2m: case X86II::MRM3m: + case X86II::MRM4m: case X86II::MRM5m: + case X86II::MRM6m: case X86II::MRM7m: + return 0; + case X86II::MRM_C1: + case X86II::MRM_C2: + case X86II::MRM_C3: + case X86II::MRM_C4: + case X86II::MRM_C8: + case X86II::MRM_C9: + case X86II::MRM_E8: + case X86II::MRM_F0: + case X86II::MRM_F8: + case X86II::MRM_F9: + case X86II::MRM_D0: + case X86II::MRM_D1: + return -1; + } + } + + /// isX86_64ExtendedReg - Is the MachineOperand a x86-64 extended (r8 or + /// higher) register? e.g. r8, xmm8, xmm13, etc. + static inline bool isX86_64ExtendedReg(unsigned RegNo) { + switch (RegNo) { + default: break; + case X86::R8: case X86::R9: case X86::R10: case X86::R11: + case X86::R12: case X86::R13: case X86::R14: case X86::R15: + case X86::R8D: case X86::R9D: case X86::R10D: case X86::R11D: + case X86::R12D: case X86::R13D: case X86::R14D: case X86::R15D: + case X86::R8W: case X86::R9W: case X86::R10W: case X86::R11W: + case X86::R12W: case X86::R13W: case X86::R14W: case X86::R15W: + case X86::R8B: case X86::R9B: case X86::R10B: case X86::R11B: + case X86::R12B: case X86::R13B: case X86::R14B: case X86::R15B: + case X86::XMM8: case X86::XMM9: case X86::XMM10: case X86::XMM11: + case X86::XMM12: case X86::XMM13: case X86::XMM14: case X86::XMM15: + case X86::YMM8: case X86::YMM9: case X86::YMM10: case X86::YMM11: + case X86::YMM12: case X86::YMM13: case X86::YMM14: case X86::YMM15: + case X86::CR8: case X86::CR9: case X86::CR10: case X86::CR11: + case X86::CR12: case X86::CR13: case X86::CR14: case X86::CR15: + return true; + } + return false; + } + + static inline bool isX86_64NonExtLowByteReg(unsigned reg) { + return (reg == X86::SPL || reg == X86::BPL || + reg == X86::SIL || reg == X86::DIL); + } +} + +} // end namespace llvm; + +#endif |
