diff options
Diffstat (limited to 'contrib/libpcap/pcap/bpf.h')
| -rw-r--r-- | contrib/libpcap/pcap/bpf.h | 192 |
1 files changed, 189 insertions, 3 deletions
diff --git a/contrib/libpcap/pcap/bpf.h b/contrib/libpcap/pcap/bpf.h index 8576bbd..ff88fd0 100644 --- a/contrib/libpcap/pcap/bpf.h +++ b/contrib/libpcap/pcap/bpf.h @@ -36,8 +36,6 @@ * SUCH DAMAGE. * * @(#)bpf.h 7.1 (Berkeley) 5/7/91 - * - * @(#) $Header: /tcpdump/master/libpcap/pcap/bpf.h,v 1.32 2008-12-23 20:13:29 guy Exp $ (LBL) */ /* @@ -1189,7 +1187,131 @@ struct bpf_program { */ #define DLT_SCTP 248 -#define DLT_MATCHING_MAX 248 /* highest value in the "matching" range */ +/* + * USB packets, beginning with a USBPcap header. + * + * Requested by Tomasz Mon <desowin@gmail.com> + */ +#define DLT_USBPCAP 249 + +/* + * Schweitzer Engineering Laboratories "RTAC" product serial-line + * packets. + * + * Requested by Chris Bontje <chris_bontje@selinc.com>. + */ +#define DLT_RTAC_SERIAL 250 + +/* + * Bluetooth Low Energy air interface link-layer packets. + * + * Requested by Mike Kershaw <dragorn@kismetwireless.net>. + */ +#define DLT_BLUETOOTH_LE_LL 251 + +/* + * DLT type for upper-protocol layer PDU saves from wireshark. + * + * the actual contents are determined by two TAGs stored with each + * packet: + * EXP_PDU_TAG_LINKTYPE the link type (LINKTYPE_ value) of the + * original packet. + * + * EXP_PDU_TAG_PROTO_NAME the name of the wireshark dissector + * that can make sense of the data stored. + */ +#define DLT_WIRESHARK_UPPER_PDU 252 + +/* + * DLT type for the netlink protocol (nlmon devices). + */ +#define DLT_NETLINK 253 + +/* + * Bluetooth Linux Monitor headers for the BlueZ stack. + */ +#define DLT_BLUETOOTH_LINUX_MONITOR 254 + +/* + * Bluetooth Basic Rate/Enhanced Data Rate baseband packets, as + * captured by Ubertooth. + */ +#define DLT_BLUETOOTH_BREDR_BB 255 + +/* + * Bluetooth Low Energy link layer packets, as captured by Ubertooth. + */ +#define DLT_BLUETOOTH_LE_LL_WITH_PHDR 256 + +/* + * PROFIBUS data link layer. + */ +#define DLT_PROFIBUS_DL 257 + +/* + * Apple's DLT_PKTAP headers. + * + * Sadly, the folks at Apple either had no clue that the DLT_USERn values + * are for internal use within an organization and partners only, and + * didn't know that the right way to get a link-layer header type is to + * ask tcpdump.org for one, or knew and didn't care, so they just + * used DLT_USER2, which causes problems for everything except for + * their version of tcpdump. + * + * So I'll just give them one; hopefully this will show up in a + * libpcap release in time for them to get this into 10.10 Big Sur + * or whatever Mavericks' successor is called. LINKTYPE_PKTAP + * will be 258 *even on OS X*; that is *intentional*, so that + * PKTAP files look the same on *all* OSes (different OSes can have + * different numerical values for a given DLT_, but *MUST NOT* have + * different values for what goes in a file, as files can be moved + * between OSes!). + * + * When capturing, on a system with a Darwin-based OS, on a device + * that returns 149 (DLT_USER2 and Apple's DLT_PKTAP) with this + * version of libpcap, the DLT_ value for the pcap_t will be DLT_PKTAP, + * and that will continue to be DLT_USER2 on Darwin-based OSes. That way, + * binary compatibility with Mavericks is preserved for programs using + * this version of libpcap. This does mean that if you were using + * DLT_USER2 for some capture device on OS X, you can't do so with + * this version of libpcap, just as you can't with Apple's libpcap - + * on OS X, they define DLT_PKTAP to be DLT_USER2, so programs won't + * be able to distinguish between PKTAP and whatever you were using + * DLT_USER2 for. + * + * If the program saves the capture to a file using this version of + * libpcap's pcap_dump code, the LINKTYPE_ value in the file will be + * LINKTYPE_PKTAP, which will be 258, even on Darwin-based OSes. + * That way, the file will *not* be a DLT_USER2 file. That means + * that the latest version of tcpdump, when built with this version + * of libpcap, and sufficiently recent versions of Wireshark will + * be able to read those files and interpret them correctly; however, + * Apple's version of tcpdump in OS X 10.9 won't be able to handle + * them. (Hopefully, Apple will pick up this version of libpcap, + * and the corresponding version of tcpdump, so that tcpdump will + * be able to handle the old LINKTYPE_USER2 captures *and* the new + * LINKTYPE_PKTAP captures.) + */ +#ifdef __APPLE__ +#define DLT_PKTAP DLT_USER2 +#else +#define DLT_PKTAP 258 +#endif + +/* + * Ethernet packets preceded by a header giving the last 6 octets + * of the preamble specified by 802.3-2012 Clause 65, section + * 65.1.3.2 "Transmit". + */ +#define DLT_EPON 259 + +/* + * IPMI trace packets, as specified by Table 3-20 "Trace Data Block Format" + * in the PICMG HPM.2 specification. + */ +#define DLT_IPMI_HPM_2 260 + +#define DLT_MATCHING_MAX 260 /* highest value in the "matching" range */ /* * DLT and savefile link type values are split into a class and @@ -1213,7 +1335,17 @@ struct bpf_program { /* * The instruction encodings. + * + * Please inform tcpdump-workers@lists.tcpdump.org if you use any + * of the reserved values, so that we can note that they're used + * (and perhaps implement it in the reference BPF implementation + * and encourage its implementation elsewhere). + */ + +/* + * The upper 8 bits of the opcode aren't used. BSD/OS used 0x8000. */ + /* instruction classes */ #define BPF_CLASS(code) ((code) & 0x07) #define BPF_LD 0x00 @@ -1230,6 +1362,7 @@ struct bpf_program { #define BPF_W 0x00 #define BPF_H 0x08 #define BPF_B 0x10 +/* 0x18 reserved; used by BSD/OS */ #define BPF_MODE(code) ((code) & 0xe0) #define BPF_IMM 0x00 #define BPF_ABS 0x20 @@ -1237,6 +1370,8 @@ struct bpf_program { #define BPF_MEM 0x60 #define BPF_LEN 0x80 #define BPF_MSH 0xa0 +/* 0xc0 reserved; used by BSD/OS */ +/* 0xe0 reserved; used by BSD/OS */ /* alu/jmp fields */ #define BPF_OP(code) ((code) & 0xf0) @@ -1249,11 +1384,30 @@ struct bpf_program { #define BPF_LSH 0x60 #define BPF_RSH 0x70 #define BPF_NEG 0x80 +#define BPF_MOD 0x90 +#define BPF_XOR 0xa0 +/* 0xb0 reserved */ +/* 0xc0 reserved */ +/* 0xd0 reserved */ +/* 0xe0 reserved */ +/* 0xf0 reserved */ + #define BPF_JA 0x00 #define BPF_JEQ 0x10 #define BPF_JGT 0x20 #define BPF_JGE 0x30 #define BPF_JSET 0x40 +/* 0x50 reserved; used on BSD/OS */ +/* 0x60 reserved */ +/* 0x70 reserved */ +/* 0x80 reserved */ +/* 0x90 reserved */ +/* 0xa0 reserved */ +/* 0xb0 reserved */ +/* 0xc0 reserved */ +/* 0xd0 reserved */ +/* 0xe0 reserved */ +/* 0xf0 reserved */ #define BPF_SRC(code) ((code) & 0x08) #define BPF_K 0x00 #define BPF_X 0x08 @@ -1261,11 +1415,43 @@ struct bpf_program { /* ret - BPF_K and BPF_X also apply */ #define BPF_RVAL(code) ((code) & 0x18) #define BPF_A 0x10 +/* 0x18 reserved */ /* misc */ #define BPF_MISCOP(code) ((code) & 0xf8) #define BPF_TAX 0x00 +/* 0x08 reserved */ +/* 0x10 reserved */ +/* 0x18 reserved */ +/* #define BPF_COP 0x20 NetBSD "coprocessor" extensions */ +/* 0x28 reserved */ +/* 0x30 reserved */ +/* 0x38 reserved */ +/* #define BPF_COPX 0x40 NetBSD "coprocessor" extensions */ +/* also used on BSD/OS */ +/* 0x48 reserved */ +/* 0x50 reserved */ +/* 0x58 reserved */ +/* 0x60 reserved */ +/* 0x68 reserved */ +/* 0x70 reserved */ +/* 0x78 reserved */ #define BPF_TXA 0x80 +/* 0x88 reserved */ +/* 0x90 reserved */ +/* 0x98 reserved */ +/* 0xa0 reserved */ +/* 0xa8 reserved */ +/* 0xb0 reserved */ +/* 0xb8 reserved */ +/* 0xc0 reserved; used on BSD/OS */ +/* 0xc8 reserved */ +/* 0xd0 reserved */ +/* 0xd8 reserved */ +/* 0xe0 reserved */ +/* 0xe8 reserved */ +/* 0xf0 reserved */ +/* 0xf8 reserved */ /* * The instruction data structure. |
