4 files changed, 14 insertions, 12 deletions
diff --git a/contrib/ipfilter/man/ipf.5 b/contrib/ipfilter/man/ipf.5
index ecd6caf..2f998b5 100644
--- a/contrib/ipfilter/man/ipf.5
+++ b/contrib/ipfilter/man/ipf.5
@@ -1,11 +1,11 @@
 .\" $FreeBSD$
 .TH IPF 5
 .SH NAME
-ipf, ipf.conf \- IP packet filter rule syntax
+ipf, ipf.conf, ipf6.conf \- IP packet filter rule syntax
 .SH DESCRIPTION
 .PP
 A rule file for \fBipf\fP may have any name or even be stdin.  As
-\fBipfstat\fP produces parseable rules as output when displaying the internal
+\fBipfstat\fP produces parsable rules as output when displaying the internal
 kernel filter lists, it is quite plausible to use its output to feed back
 into \fBipf\fP.  Thus, to remove all filters on input packets, the following
 could be done:
@@ -38,7 +38,7 @@ log	= "log" [ "body" ] [ "first" ] [ "or-block" ] [ "level" loglevel ] .
 call	= "call" [ "now" ] function-name .
 skip	= "skip" decnumber .
 dup	= "dup-to" interface-name[":"ipaddr] .
-froute	= "fastroute" | "to" interface-name .
+froute	= "fastroute" | "to" interface-name[":"ipaddr] .
 protocol = "tcp/udp" | "udp" | "tcp" | "icmp" | decnumber .
 srcdst	= "all" | fromto .
 fromto	= "from" [ "!" ] object "to" [ "!" ] object .
@@ -117,7 +117,7 @@ below).
 Filters are installed by default at the end of the kernel's filter
 lists, prepending the rule with \fB@n\fP will cause it to be inserted
 as the n'th entry in the current list. This is especially useful when
-modifying and testing active filter rulesets. See ipf(1) for more
+modifying and testing active filter rulesets. See ipf(8) for more
 information.
 .SH ACTIONS
 .PP
@@ -137,7 +137,7 @@ with a rule which is being applied to TCP packets.  When using
 \fBreturn-icmp\fP or \fBreturn-icmp-as-dest\fP, it is possible to specify
 the actual unreachable `type'.  That is, whether it is a network
 unreachable, port unreachable or even administratively
-prohibitied. This is done by enclosing the ICMP code associated with
+prohibited. This is done by enclosing the ICMP code associated with
 it in parenthesis directly following \fBreturn-icmp\fP or
 \fBreturn-icmp-as-dest\fP as follows:
 .nf
@@ -387,7 +387,7 @@ against, e.g.:
 .TP
 .B icmp-type
 is only effective when used with \fBproto icmp\fP and must NOT be used
-in conjuction with \fBflags\fP.  There are a number of types, which can be
+in conjunction with \fBflags\fP.  There are a number of types, which can be
 referred to by an abbreviation recognised by this language, or the numbers
 with which they are associated can be used.  The most important from
 a security point of view is the ICMP redirect.
@@ -428,7 +428,7 @@ indicates that the rule should be put in group (number n) rather than group 0.
 .PP
 When a packet is logged, with either the \fBlog\fP action or option,
 the headers of the packet are written to the \fBipl\fP packet logging
-psuedo-device. Immediately following the \fBlog\fP keyword, the
+pseudo-device. Immediately following the \fBlog\fP keyword, the
 following qualifiers may be used (in order):
 .TP
 .B body
diff --git a/contrib/ipfilter/man/ipf.8 b/contrib/ipfilter/man/ipf.8
index a1f5b06..661375a 100644
--- a/contrib/ipfilter/man/ipf.8
+++ b/contrib/ipfilter/man/ipf.8
@@ -113,7 +113,7 @@ the current interface status list.
 .TP
 .B \-z
 For each rule in the input file, reset the statistics for it to zero and
-display the statistics prior to them being zero'd.
+display the statistics prior to them being zeroed.
 .TP
 .B \-Z
 Zero global statistics held in the kernel for filtering only (this doesn't
diff --git a/contrib/ipfilter/man/ipfstat.8 b/contrib/ipfilter/man/ipfstat.8
index f4e5d5b..e2f38a0 100644
--- a/contrib/ipfilter/man/ipfstat.8
+++ b/contrib/ipfilter/man/ipfstat.8
@@ -65,7 +65,7 @@ This option is only valid in combination with \fB\-t\fP. Limit the state top
 display to show only state entries whose destination IP address and port
 match the addport argument. The addrport specification is of the form
 ipaddress[,port].  The ipaddress and port should be either numerical or the
-string "any" (specifying any ip address resp. any port). If the \fB\-D\fP
+string "any" (specifying any IP address resp. any port). If the \fB\-D\fP
 option is not specified, it defaults to "\fB\-D\fP any,any".
 .TP
 .B \-f
@@ -141,7 +141,7 @@ kernel.
 Using the \fB\-t\fP option \fBipfstat\fP will enter the state top mode. In
 this mode the state table is displayed similar to the way \fBtop\fP displays
 the process table. The \fB\-C\fP, \fB\-D\fP, \fB\-P\fP, \fB\-S\fP and \fB\-T\fP 
-commandline options can be used to restrict the state entries that will be 
+command line options can be used to restrict the state entries that will be 
 shown and to specify the frequency of display updates.
 .PP
 In state top mode, the following keys can be used to influence the displayed
diff --git a/contrib/ipfilter/man/ipmon.8 b/contrib/ipfilter/man/ipmon.8
index a559e94..d7f94df 100644
--- a/contrib/ipfilter/man/ipmon.8
+++ b/contrib/ipfilter/man/ipmon.8
@@ -83,11 +83,11 @@ are displayed to the same output 'device' (stderr or syslog).
 .TP
 .B \-b
 For rules which log the body of a packet, generate hex output representing
-the packet contents afte the headers.
+the packet contents after the headers.
 .TP
 .B \-D
 Cause ipmon to turn itself into a daemon.  Using subshells or backgrounding
-of ipmon is not required to turn it into an orphan so it can run indefinately.
+of ipmon is not required to turn it into an orphan so it can run indefinitely.
 .TP
 .B "\-f <device>"
 specify an alternative device/file from which to read the log information
@@ -171,3 +171,5 @@ recorded data.
 .SH SEE ALSO
 ipl(4), ipf(8), ipfstat(8), ipnat(8)
 .\".SH BUGS
+.PP
+If you find any, please send email to me at darrenr@pobox.com