diff options
Diffstat (limited to 'contrib/gdb/gdb/remote-hms.c')
| -rw-r--r-- | contrib/gdb/gdb/remote-hms.c | 205 |
1 files changed, 121 insertions, 84 deletions
diff --git a/contrib/gdb/gdb/remote-hms.c b/contrib/gdb/gdb/remote-hms.c index 2f43e20..3ca8455 100644 --- a/contrib/gdb/gdb/remote-hms.c +++ b/contrib/gdb/gdb/remote-hms.c @@ -26,7 +26,6 @@ #include "serial.h" static void hms_open PARAMS ((char *args, int from_tty)); - static void hms_supply_register (regname, regnamelen, val, vallen) char *regname; @@ -83,61 +82,56 @@ static char *hms_inits[] = {"\003", /* Resets the prompt, and clears repeated cmds */ NULL}; -static struct monitor_ops hms_cmds = +static struct monitor_ops hms_cmds ; + +static void +init_hms_cmds(void) { - MO_CLR_BREAK_USES_ADDR | MO_FILL_USES_ADDR | MO_GETMEM_NEEDS_RANGE, - hms_inits, /* Init strings */ - "g\r", /* continue command */ - "s\r", /* single step */ - "\003", /* ^C interrupts the program */ - "b %x\r", /* set a breakpoint */ - "b - %x\r", /* clear a breakpoint */ - "b -\r", /* clear all breakpoints */ - "f %x %x %x\r", /* fill (start end val) */ - { - "m.b %x=%x\r", /* setmem.cmdb (addr, value) */ - "m.w %x=%x\r", /* setmem.cmdw (addr, value) */ - NULL, /* setmem.cmdl (addr, value) */ - NULL, /* setmem.cmdll (addr, value) */ - NULL, /* setreg.resp_delim */ - NULL, /* setreg.term */ - NULL, /* setreg.term_cmd */ - }, - { - "m.b %x %x\r", /* getmem.cmdb (addr, addr) */ - "m.w %x %x\r", /* getmem.cmdw (addr, addr) */ - NULL, /* getmem.cmdl (addr, addr) */ - NULL, /* getmem.cmdll (addr, addr) */ - ": ", /* getmem.resp_delim */ - ">", /* getmem.term */ - "\003", /* getmem.term_cmd */ - }, - { - "r %s=%x\r", /* setreg.cmd (name, value) */ - NULL, /* setreg.resp_delim */ - NULL, /* setreg.term */ - NULL /* setreg.term_cmd */ - }, - { - "r %s\r", /* getreg.cmd (name) */ - " (", /* getreg.resp_delim */ - ":", /* getreg.term */ - "\003", /* getreg.term_cmd */ - }, - "r\r", /* dump_registers */ - "\\(\\w+\\)=\\([0-9a-fA-F]+\\)", /* register_pattern */ - hms_supply_register, /* supply_register */ - NULL, /* load_routine (defaults to SRECs) */ - "tl\r", /* download command */ - NULL, /* load response */ - ">", /* monitor command prompt */ - "\r", /* end-of-command delimitor */ - NULL, /* optional command terminator */ - &hms_ops, /* target operations */ - SERIAL_1_STOPBITS, /* number of stop bits */ - hms_regnames, /* registers names */ - MONITOR_OPS_MAGIC /* magic */ -}; + hms_cmds.flags = MO_CLR_BREAK_USES_ADDR | MO_FILL_USES_ADDR | MO_GETMEM_NEEDS_RANGE; + hms_cmds.init = hms_inits; /* Init strings */ + hms_cmds.cont = "g\r"; /* continue command */ + hms_cmds.step = "s\r"; /* single step */ + hms_cmds.stop = "\003"; /* ^C interrupts the program */ + hms_cmds.set_break = "b %x\r"; /* set a breakpoint */ + hms_cmds.clr_break = "b - %x\r"; /* clear a breakpoint */ + hms_cmds.clr_all_break = "b -\r"; /* clear all breakpoints */ + hms_cmds.fill = "f %x %x %x\r"; /* fill (start end val) */ + hms_cmds.setmem.cmdb = "m.b %x=%x\r"; /* setmem.cmdb (addr, value) */ + hms_cmds.setmem.cmdw = "m.w %x=%x\r"; /* setmem.cmdw (addr, value) */ + hms_cmds.setmem.cmdl = NULL; /* setmem.cmdl (addr, value) */ + hms_cmds.setmem.cmdll = NULL; /* setmem.cmdll (addr, value) */ + hms_cmds.setmem.resp_delim = NULL;/* setreg.resp_delim */ + hms_cmds.setmem.term = NULL; /* setreg.term */ + hms_cmds.setmem.term_cmd = NULL; /* setreg.term_cmd */ + hms_cmds.getmem.cmdb = "m.b %x %x\r"; /* getmem.cmdb (addr, addr) */ + hms_cmds.getmem.cmdw = "m.w %x %x\r"; /* getmem.cmdw (addr, addr) */ + hms_cmds.getmem.cmdl = NULL; /* getmem.cmdl (addr, addr) */ + hms_cmds.getmem.cmdll = NULL; /* getmem.cmdll (addr, addr) */ + hms_cmds.getmem.resp_delim = ": ";/* getmem.resp_delim */ + hms_cmds.getmem.term = ">"; /* getmem.term */ + hms_cmds.getmem.term_cmd = "\003";/* getmem.term_cmd */ + hms_cmds.setreg.cmd = "r %s=%x\r";/* setreg.cmd (name, value) */ + hms_cmds.setreg.resp_delim = NULL;/* setreg.resp_delim */ + hms_cmds.setreg.term = NULL; /* setreg.term */ + hms_cmds.setreg.term_cmd = NULL; /* setreg.term_cmd */ + hms_cmds.getreg.cmd = "r %s\r"; /* getreg.cmd (name) */ + hms_cmds.getreg.resp_delim = " (";/* getreg.resp_delim */ + hms_cmds.getreg.term = ":"; /* getreg.term */ + hms_cmds.getreg.term_cmd = "\003";/* getreg.term_cmd */ + hms_cmds.dump_registers = "r\r"; /* dump_registers */ + hms_cmds.register_pattern = "\\(\\w+\\)=\\([0-9a-fA-F]+\\)"; /* register_pattern */ + hms_cmds.supply_register = hms_supply_register; /* supply_register */ + hms_cmds.load_routine = NULL; /* load_routine (defaults to SRECs) */ + hms_cmds.load = "tl\r"; /* download command */ + hms_cmds.loadresp = NULL; /* load response */ + hms_cmds.prompt = ">"; /* monitor command prompt */ + hms_cmds.line_term = "\r"; /* end-of-command delimitor */ + hms_cmds.cmd_end = NULL; /* optional command terminator */ + hms_cmds.target = &hms_ops; /* target operations */ + hms_cmds.stopbits = SERIAL_1_STOPBITS;/* number of stop bits */ + hms_cmds.regnames = hms_regnames; /* registers names */ + hms_cmds.magic = MONITOR_OPS_MAGIC; /* magic */ +} /* init_hms-cmds */ static void hms_open (args, from_tty) @@ -152,6 +146,7 @@ int write_dos_tick_delay; void _initialize_remote_hms () { + init_hms_cmds() ; init_monitor_ops (&hms_ops); hms_ops.to_shortname = "hms"; @@ -164,7 +159,6 @@ Specify the serial device it is connected to (e.g. /dev/ttya)."; add_target (&hms_ops); } - #if 0 /* This is kept here because we used to support the H8/500 in this module, and I haven't done the H8/500 yet */ @@ -419,7 +413,7 @@ hms_create_inferior (execfile, args, env) error ("Can't pass arguments to remote hms process."); if (execfile == 0 || exec_bfd == 0) - error ("No exec file specified"); + error ("No executable file specified"); entry_pt = (int) bfd_get_start_address (exec_bfd); check_open (); @@ -924,7 +918,7 @@ hms_fetch_register (dummy) int s; int gottok; - unsigned LONGEST reg[NUM_REGS]; + ULONGEST reg[NUM_REGS]; check_open (); @@ -1327,33 +1321,75 @@ hms_open (name, from_tty) /* Define the target subroutine names */ -struct target_ops hms_ops = +struct target_ops hms_ops ; + +static void +init_hms_ops(void) { - "hms", "Remote HMS monitor", - "Use the H8 evaluation board running the HMS monitor connected\n\ -by a serial line.", - - hms_open, hms_close, - 0, hms_detach, hms_resume, hms_wait, /* attach */ - hms_fetch_register, hms_store_register, - hms_prepare_to_store, - hms_xfer_inferior_memory, - hms_files_info, - hms_insert_breakpoint, hms_remove_breakpoint, /* Breakpoints */ - 0, 0, 0, 0, 0, /* Terminal handling */ - hms_kill, /* FIXME, kill */ - generic_load, - 0, /* lookup_symbol */ - hms_create_inferior, /* create_inferior */ - hms_mourn, /* mourn_inferior FIXME */ - 0, /* can_run */ - 0, /* notice_signals */ - 0, /* to_thread_alive */ - 0, /* to_stop */ - process_stratum, 0, /* next */ - 1, 1, 1, 1, 1, /* all mem, mem, stack, regs, exec */ - 0, 0, /* Section pointers */ - OPS_MAGIC, /* Always the last thing */ + hms_ops.to_shortname = "hms"; + hms_ops.to_longname = "Remote HMS monitor"; + hms_ops.to_doc = "Use the H8 evaluation board running the HMS monitor connected\n\ +by a serial line."; + hms_ops.to_open = hms_open; + hms_ops.to_close = hms_close; + hms_ops.to_attach = 0; + hms_ops.to_post_attach = NULL; + hms_ops.to_require_attach = NULL; + hms_ops.to_detach = hms_detach; + hms_ops.to_require_detach = NULL; + hms_ops.to_resume = hms_resume; + hms_ops.to_wait = hms_wait; + hms_ops.to_post_wait = NULL; + hms_ops.to_fetch_registers = hms_fetch_register; + hms_ops.to_store_registers = hms_store_register; + hms_ops.to_prepare_to_store = hms_prepare_to_store; + hms_ops.to_xfer_memory = hms_xfer_inferior_memory; + hms_ops.to_files_info = hms_files_info; + hms_ops.to_insert_breakpoint = hms_insert_breakpoint; + hms_ops.to_remove_breakpoint = hms_remove_breakpoint; + hms_ops.to_terminal_init = 0; + hms_ops.to_terminal_inferior = 0; + hms_ops.to_terminal_ours_for_output = 0; + hms_ops.to_terminal_ours = 0; + hms_ops.to_terminal_info = 0; + hms_ops.to_kill = hms_kill; + hms_ops.to_load = generic_load; + hms_ops.to_lookup_symbol = 0; + hms_ops.to_create_inferior = hms_create_inferior; + hms_ops.to_post_startup_inferior = NULL; + hms_ops.to_acknowledge_created_inferior = NULL; + hms_ops.to_clone_and_follow_inferior = NULL; + hms_ops.to_post_follow_inferior_by_clone = NULL; + hms_ops.to_insert_fork_catchpoint = NULL; + hms_ops.to_remove_fork_catchpoint = NULL; + hms_ops.to_insert_vfork_catchpoint = NULL; + hms_ops.to_remove_vfork_catchpoint = NULL; + hms_ops.to_has_forked = NULL; + hms_ops.to_has_vforked = NULL; + hms_ops.to_can_follow_vfork_prior_to_exec = NULL; + hms_ops.to_post_follow_vfork = NULL; + hms_ops.to_insert_exec_catchpoint = NULL; + hms_ops.to_remove_exec_catchpoint = NULL; + hms_ops.to_has_execd = NULL; + hms_ops.to_reported_exec_events_per_exec_call = NULL; + hms_ops.to_has_exited = NULL; + hms_ops.to_mourn_inferior = hms_mourn; + hms_ops.to_can_run = 0; + hms_ops.to_notice_signals = 0; + hms_ops.to_thread_alive = 0; + hms_ops.to_stop = 0; + hms_ops.to_pid_to_exec_file = NULL; + hms_ops.to_core_file_to_sym_file = NULL; + hms_ops.to_stratum = process_stratum; + hms_ops.DONT_USE = 0; + hms_ops.to_has_all_memory = 1; + hms_ops.to_has_memory = 1; + hms_ops.to_has_stack = 1; + hms_ops.to_has_registers = 1; + hms_ops.to_has_execution = 1; + hms_ops.to_sections = 0; + hms_ops.to_sections_end = 0; + hms_ops.to_magic = OPS_MAGIC; }; hms_quiet () /* FIXME - this routine can be removed after Dec '94 */ @@ -1442,6 +1478,7 @@ remove_commands () void _initialize_remote_hms () { + init_hms_ops() ; add_target (&hms_ops); add_com ("hms <command>", class_obscure, hms_com, |
