summaryrefslogtreecommitdiffstats
path: root/contrib/gdb/bfd/coff-h8300.c
diff options
context:
space:
mode:
Diffstat (limited to 'contrib/gdb/bfd/coff-h8300.c')
-rw-r--r--contrib/gdb/bfd/coff-h8300.c650
1 files changed, 0 insertions, 650 deletions
diff --git a/contrib/gdb/bfd/coff-h8300.c b/contrib/gdb/bfd/coff-h8300.c
deleted file mode 100644
index 48d0d5a..0000000
--- a/contrib/gdb/bfd/coff-h8300.c
+++ /dev/null
@@ -1,650 +0,0 @@
-/* BFD back-end for Hitachi H8/300 COFF binaries.
- Copyright 1990, 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
- Written by Steve Chamberlain, <sac@cygnus.com>.
-
-This file is part of BFD, the Binary File Descriptor library.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#include "bfd.h"
-#include "sysdep.h"
-#include "obstack.h"
-#include "libbfd.h"
-#include "bfdlink.h"
-#include "genlink.h"
-#include "coff/h8300.h"
-#include "coff/internal.h"
-#include "libcoff.h"
-
-#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (1)
-
-
-/* special handling for H8/300 relocs.
- We only come here for pcrel stuff and return normally if not an -r link.
- When doing -r, we can't do any arithmetic for the pcrel stuff, because
- the code in reloc.c assumes that we can manipulate the targets of
- the pcrel branches. This isn't so, since the H8/300 can do relaxing,
- which means that the gap after the instruction may not be enough to
- contain the offset required for the branch, so we have to use the only
- the addend until the final link */
-
-static bfd_reloc_status_type
-special (abfd, reloc_entry, symbol, data, input_section, output_bfd,
- error_message)
- bfd *abfd;
- arelent *reloc_entry;
- asymbol *symbol;
- PTR data;
- asection *input_section;
- bfd *output_bfd;
- char **error_message;
-{
- if (output_bfd == (bfd *) NULL)
- return bfd_reloc_continue;
-
- return bfd_reloc_ok;
-}
-
-static reloc_howto_type howto_table[] =
-{
- HOWTO (R_RELBYTE, 0, 0, 8, false, 0, complain_overflow_bitfield, special, "8", false, 0x000000ff, 0x000000ff, false),
- HOWTO (R_RELWORD, 0, 1, 16, false, 0, complain_overflow_bitfield, special, "16", false, 0x0000ffff, 0x0000ffff, false),
- HOWTO (R_RELLONG, 0, 2, 32, false, 0, complain_overflow_bitfield, special, "32", false, 0xffffffff, 0xffffffff, false),
- HOWTO (R_PCRBYTE, 0, 0, 8, true, 0, complain_overflow_signed, special, "DISP8", false, 0x000000ff, 0x000000ff, true),
- HOWTO (R_PCRWORD, 0, 1, 16, true, 0, complain_overflow_signed, special, "DISP16", false, 0x0000ffff, 0x0000ffff, true),
- HOWTO (R_PCRLONG, 0, 2, 32, true, 0, complain_overflow_signed, special, "DISP32", false, 0xffffffff, 0xffffffff, true),
- HOWTO (R_MOVB1, 0, 1, 16, false, 0, complain_overflow_bitfield, special, "16/8", false, 0x0000ffff, 0x0000ffff, false),
- HOWTO (R_MOVB2, 0, 1, 16, false, 0, complain_overflow_bitfield, special, "8/16", false, 0x0000ffff, 0x0000ffff, false),
- HOWTO (R_JMP1, 0, 1, 16, false, 0, complain_overflow_bitfield, special, "16/pcrel", false, 0x0000ffff, 0x0000ffff, false),
- HOWTO (R_JMP2, 0, 0, 8, false, 0, complain_overflow_bitfield, special, "pcrecl/16", false, 0x000000ff, 0x000000ff, false),
-
-
- HOWTO (R_JMPL1, 0, 2, 32, false, 0, complain_overflow_bitfield, special, "24/pcrell", false, 0x00ffffff, 0x00ffffff, false),
- HOWTO (R_JMPL_B8, 0, 0, 8, false, 0, complain_overflow_bitfield, special, "pc8/24", false, 0x000000ff, 0x000000ff, false),
-
- HOWTO (R_MOVLB1, 0, 1, 16, false, 0, complain_overflow_bitfield,special, "24/8", false, 0x0000ffff, 0x0000ffff, false),
- HOWTO (R_MOVLB2, 0, 1, 16, false, 0, complain_overflow_bitfield, special, "8/24", false, 0x0000ffff, 0x0000ffff, false),
-
- /* An indirect reference to a function. This causes the function's address
- to be added to the function vector in lo-mem and puts the address of
- the function vector's entry in the jsr instruction. */
- HOWTO (R_MEM_INDIRECT, 0, 0, 8, false, 0, complain_overflow_bitfield, special, "8/indirect", false, 0x000000ff, 0x000000ff, false),
-
-};
-
-
-/* Turn a howto into a reloc number */
-
-#define SELECT_RELOC(x,howto) \
- { x.r_type = select_reloc(howto); }
-
-#define BADMAG(x) (H8300BADMAG(x)&& H8300HBADMAG(x))
-#define H8300 1 /* Customize coffcode.h */
-#define __A_MAGIC_SET__
-
-
-
-/* Code to swap in the reloc */
-#define SWAP_IN_RELOC_OFFSET bfd_h_get_32
-#define SWAP_OUT_RELOC_OFFSET bfd_h_put_32
-#define SWAP_OUT_RELOC_EXTRA(abfd, src, dst) \
- dst->r_stuff[0] = 'S'; \
- dst->r_stuff[1] = 'C';
-
-
-static int
-select_reloc (howto)
- reloc_howto_type *howto;
-{
- return howto->type;
-}
-
-/* Code to turn a r_type into a howto ptr, uses the above howto table
- */
-
-static void
-rtype2howto (internal, dst)
- arelent *internal;
- struct internal_reloc *dst;
-{
- switch (dst->r_type)
- {
- case R_RELBYTE:
- internal->howto = howto_table + 0;
- break;
- case R_RELWORD:
- internal->howto = howto_table + 1;
- break;
- case R_RELLONG:
- internal->howto = howto_table + 2;
- break;
- case R_PCRBYTE:
- internal->howto = howto_table + 3;
- break;
- case R_PCRWORD:
- internal->howto = howto_table + 4;
- break;
- case R_PCRLONG:
- internal->howto = howto_table + 5;
- break;
- case R_MOVB1:
- internal->howto = howto_table + 6;
- break;
- case R_MOVB2:
- internal->howto = howto_table + 7;
- break;
- case R_JMP1:
- internal->howto = howto_table + 8;
- break;
- case R_JMP2:
- internal->howto = howto_table + 9;
- break;
- case R_JMPL1:
- internal->howto = howto_table + 10;
- break;
- case R_JMPL_B8:
- internal->howto = howto_table + 11;
- break;
- case R_MOVLB1:
- internal->howto = howto_table + 12;
- break;
- case R_MOVLB2:
- internal->howto = howto_table + 13;
- break;
- case R_MEM_INDIRECT:
- internal->howto = howto_table + 14;
- break;
- default:
- abort ();
- break;
- }
-}
-
-#define RTYPE2HOWTO(internal, relocentry) rtype2howto(internal,relocentry)
-
-
-/* Perform any necessaru magic to the addend in a reloc entry */
-
-
-#define CALC_ADDEND(abfd, symbol, ext_reloc, cache_ptr) \
- cache_ptr->addend = ext_reloc.r_offset;
-
-
-#define RELOC_PROCESSING(relent,reloc,symbols,abfd,section) \
- reloc_processing(relent, reloc, symbols, abfd, section)
-
-static void
-reloc_processing (relent, reloc, symbols, abfd, section)
- arelent * relent;
- struct internal_reloc *reloc;
- asymbol ** symbols;
- bfd * abfd;
- asection * section;
-{
- relent->address = reloc->r_vaddr;
- rtype2howto (relent, reloc);
-
- if (((int) reloc->r_symndx) > 0)
- {
- relent->sym_ptr_ptr = symbols + obj_convert (abfd)[reloc->r_symndx];
- }
- else
- {
- relent->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
- }
-
-
-
- relent->addend = reloc->r_offset;
-
- relent->address -= section->vma;
- /* relent->section = 0;*/
-}
-
-
-static int
-h8300_reloc16_estimate(abfd, input_section, reloc, shrink, link_info)
- bfd *abfd;
- asection *input_section;
- arelent *reloc;
- unsigned int shrink;
- struct bfd_link_info *link_info;
-{
- bfd_vma value;
- bfd_vma dot;
- bfd_vma gap;
-
- /* The address of the thing to be relocated will have moved back by
- the size of the shrink - but we don't change reloc->address here,
- since we need it to know where the relocation lives in the source
- uncooked section */
-
- /* reloc->address -= shrink; conceptual */
-
- bfd_vma address = reloc->address - shrink;
-
-
- switch (reloc->howto->type)
- {
- case R_MOVB2:
- case R_JMP2:
- shrink+=2;
- break;
-
- /* Thing is a move one byte */
- case R_MOVB1:
- value = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
-
- if (value >= 0xff00)
- {
-
- /* Change the reloc type from 16bit, possible 8 to 8bit
- possible 16 */
- reloc->howto = reloc->howto + 1;
- /* The place to relc moves back by one */
- /* This will be two bytes smaller in the long run */
- shrink +=2 ;
- bfd_perform_slip(abfd, 2, input_section, address);
- }
-
- break;
- /* This is the 24 bit branch which could become an 8 bitter,
- the relocation points to the first byte of the insn, not the
- actual data */
-
- case R_JMPL1:
- value = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
-
- dot = input_section->output_section->vma +
- input_section->output_offset + address;
-
- /* See if the address we're looking at within 127 bytes of where
- we are, if so then we can use a small branch rather than the
- jump we were going to */
-
- gap = value - dot ;
-
- if (-120 < (long)gap && (long)gap < 120 )
- {
-
- /* Change the reloc type from 24bit, possible 8 to 8bit
- possible 32 */
- reloc->howto = reloc->howto + 1;
- /* This will be two bytes smaller in the long run */
- shrink +=2 ;
- bfd_perform_slip(abfd, 2, input_section, address);
- }
- break;
-
- case R_JMP1:
-
- value = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
-
- dot = input_section->output_section->vma +
- input_section->output_offset + address;
-
- /* See if the address we're looking at within 127 bytes of where
- we are, if so then we can use a small branch rather than the
- jump we were going to */
-
- gap = value - (dot - shrink);
-
-
- if (-120 < (long)gap && (long)gap < 120 )
- {
-
- /* Change the reloc type from 16bit, possible 8 to 8bit
- possible 16 */
- reloc->howto = reloc->howto + 1;
- /* The place to relc moves back by one */
-
- /* This will be two bytes smaller in the long run */
- shrink +=2 ;
- bfd_perform_slip(abfd, 2, input_section, address);
- }
- break;
- }
-
-
- return shrink;
-}
-
-
-/* First phase of a relaxing link */
-
-/* Reloc types
- large small
- R_MOVB1 R_MOVB2 mov.b with 16bit or 8 bit address
- R_JMP1 R_JMP2 jmp or pcrel branch
- R_JMPL1 R_JMPL_B8 24jmp or pcrel branch
- R_MOVLB1 R_MOVLB2 24 or 8 bit reloc for mov.b
-
-*/
-
-static void
-h8300_reloc16_extra_cases (abfd, link_info, link_order, reloc, data, src_ptr,
- dst_ptr)
- bfd *abfd;
- struct bfd_link_info *link_info;
- struct bfd_link_order *link_order;
- arelent *reloc;
- bfd_byte *data;
- unsigned int *src_ptr;
- unsigned int *dst_ptr;
-{
- unsigned int src_address = *src_ptr;
- unsigned int dst_address = *dst_ptr;
- asection *input_section = link_order->u.indirect.section;
-
- switch (reloc->howto->type)
- {
- /* A 24 bit branch which could be a 8 bit pcrel, really pointing to
- the byte before the 24bit hole, so we can treat it as a 32bit pointer */
- case R_PCRBYTE:
- {
- bfd_vma dot = link_order->offset
- + dst_address
- + link_order->u.indirect.section->output_section->vma;
- int gap = (bfd_coff_reloc16_get_value (reloc, link_info, input_section)
- - dot);
- if (gap > 127 || gap < -128)
- {
- if (! ((*link_info->callbacks->reloc_overflow)
- (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
- reloc->howto->name, reloc->addend, input_section->owner,
- input_section, reloc->address)))
- abort ();
- }
- gap &= ~1;
- bfd_put_8 (abfd, gap, data + dst_address);
- dst_address++;
- src_address++;
-
- break;
- }
- case R_PCRWORD:
- {
- bfd_vma dot = link_order->offset
- + dst_address
- + link_order->u.indirect.section->output_section->vma;
- int gap = (bfd_coff_reloc16_get_value (reloc, link_info, input_section)
- - dot) - 1;
- if (gap > 32767 || gap < -32768)
- {
- if (! ((*link_info->callbacks->reloc_overflow)
- (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
- reloc->howto->name, reloc->addend, input_section->owner,
- input_section, reloc->address)))
- abort ();
- }
-
- bfd_put_16 (abfd, gap, data + dst_address);
- dst_address+=2;
- src_address+=2;
-
- break;
- }
-
- case R_MEM_INDIRECT: /* Temporary */
- case R_RELBYTE:
- {
- unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
- input_section);
- if (gap < 0xff
- || (gap >= 0x0000ff00
- && gap <= 0x0000ffff)
- || ( gap >= 0x00ffff00
- && gap <= 0x00ffffff)
- || ( gap >= 0xffffff00
- && gap <= 0xffffffff))
- {
- bfd_put_8 (abfd, gap, data + dst_address);
- dst_address += 1;
- src_address += 1;
- }
- else
- {
- if (! ((*link_info->callbacks->reloc_overflow)
- (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
- reloc->howto->name, reloc->addend, input_section->owner,
- input_section, reloc->address)))
- abort ();
- }
- }
- break;
- case R_JMP1:
- /* A relword which would have like to have been a pcrel */
- case R_MOVB1:
- /* A relword which would like to have been modified but
- didn't make it */
- case R_RELWORD:
- bfd_put_16 (abfd,
- bfd_coff_reloc16_get_value (reloc, link_info, input_section),
- data + dst_address);
- dst_address += 2;
- src_address += 2;
- break;
- case R_RELLONG:
- bfd_put_32 (abfd,
- bfd_coff_reloc16_get_value (reloc, link_info, input_section),
- data + dst_address);
- dst_address += 4;
- src_address += 4;
- break;
-
- case R_MOVB2:
- /* Special relaxed type, there will be a gap between where we
- get stuff from and where we put stuff to now
-
- for a mov.b @aa:16 -> mov.b @aa:8
- opcode 0x6a 0x0y offset
- -> 0x2y off
- */
- if (data[dst_address - 1] != 0x6a)
- abort ();
- switch (data[src_address] & 0xf0)
- {
- case 0x00:
- /* Src is memory */
- data[dst_address - 1] = (data[src_address] & 0xf) | 0x20;
- break;
- case 0x80:
- /* Src is reg */
- data[dst_address - 1] = (data[src_address] & 0xf) | 0x30;
- break;
- default:
- abort ();
- }
-
- /* the offset must fit ! after all, what was all the relaxing
- about ? */
-
- bfd_put_8 (abfd,
- bfd_coff_reloc16_get_value (reloc, link_info, input_section),
- data + dst_address);
-
- /* Note the magic - src goes up by two bytes, but dst by only
- one */
- dst_address += 1;
- src_address += 3;
-
- break;
-
- case R_JMP2:
-
- /* Speciial relaxed type */
- {
- bfd_vma dot = link_order->offset
- + dst_address
- + link_order->u.indirect.section->output_section->vma;
-
- int gap = (bfd_coff_reloc16_get_value (reloc, link_info, input_section)
- - dot - 1);
-
- if ((gap & ~0xff) != 0 && ((gap & 0xff00) != 0xff00))
- abort ();
-
- bfd_put_8 (abfd, gap, data + dst_address);
-
- switch (data[dst_address - 1])
- {
- case 0x5e:
- /* jsr -> bsr */
- bfd_put_8 (abfd, 0x55, data + dst_address - 1);
- break;
- case 0x5a:
- /* jmp ->bra */
- bfd_put_8 (abfd, 0x40, data + dst_address - 1);
- break;
-
- default:
- abort ();
- }
- dst_address++;
- src_address += 3;
-
- break;
- }
- break;
-
- case R_JMPL_B8: /* 24 bit branch which is now 8 bits */
-
- /* Speciial relaxed type */
- {
- bfd_vma dot = link_order->offset
- + dst_address
- + link_order->u.indirect.section->output_section->vma;
-
- int gap = (bfd_coff_reloc16_get_value (reloc, link_info, input_section)
- - dot - 2);
-
- if ((gap & ~0xff) != 0 && ((gap & 0xff00) != 0xff00))
- abort ();
-
- switch (data[src_address])
- {
- case 0x5e:
- /* jsr -> bsr */
- bfd_put_8 (abfd, 0x55, data + dst_address);
- break;
- case 0x5a:
- /* jmp ->bra */
- bfd_put_8 (abfd, 0x40, data + dst_address);
- break;
-
- default:
- bfd_put_8 (abfd, 0xde, data + dst_address);
- break;
- }
-
- bfd_put_8 (abfd, gap, data + dst_address + 1);
- dst_address += 2;
- src_address += 4;
-
- break;
- }
-
- case R_JMPL1:
- {
- int v = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
- int o = bfd_get_32 (abfd, data + src_address);
- v = (v & 0x00ffffff) | (o & 0xff000000);
- bfd_put_32 (abfd, v, data + dst_address);
- dst_address += 4;
- src_address += 4;
- }
-
- break;
-
-
- /* A 24 bit mov which could be an 8 bit move, really pointing to
- the byte before the 24bit hole, so we can treat it as a 32bit pointer */
- case R_MOVLB1:
- {
- int v = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
- int o = bfd_get_32 (abfd, data + dst_address);
- v = (v & 0x00ffffff) | (o & 0xff000000);
- bfd_put_32 (abfd, v, data + dst_address);
- dst_address += 4;
- src_address += 4;
- }
-
- break;
- default:
-
- abort ();
- break;
-
- }
- *src_ptr = src_address;
- *dst_ptr = dst_address;
-
-}
-
-#define coff_reloc16_extra_cases h8300_reloc16_extra_cases
-#define coff_reloc16_estimate h8300_reloc16_estimate
-
-#define COFF_LONG_FILENAMES
-#include "coffcode.h"
-
-
-#undef coff_bfd_get_relocated_section_contents
-#undef coff_bfd_relax_section
-#define coff_bfd_get_relocated_section_contents \
- bfd_coff_reloc16_get_relocated_section_contents
-#define coff_bfd_relax_section bfd_coff_reloc16_relax_section
-
-
-
-const bfd_target h8300coff_vec =
-{
- "coff-h8300", /* name */
- bfd_target_coff_flavour,
- BFD_ENDIAN_BIG, /* data byte order is big */
- BFD_ENDIAN_BIG, /* header byte order is big */
-
- (HAS_RELOC | EXEC_P | /* object flags */
- HAS_LINENO | HAS_DEBUG |
- HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE ),
- (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
- '_', /* leading char */
- '/', /* ar_pad_char */
- 15, /* ar_max_namelen */
- bfd_getb64, bfd_getb_signed_64, bfd_putb64,
- bfd_getb32, bfd_getb_signed_32, bfd_putb32,
- bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* data */
- bfd_getb64, bfd_getb_signed_64, bfd_putb64,
- bfd_getb32, bfd_getb_signed_32, bfd_putb32,
- bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
-
- {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
- bfd_generic_archive_p, _bfd_dummy_target},
- {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */
- bfd_false},
- {bfd_false, coff_write_object_contents, /* bfd_write_contents */
- _bfd_write_archive_contents, bfd_false},
-
- BFD_JUMP_TABLE_GENERIC (coff),
- BFD_JUMP_TABLE_COPY (coff),
- BFD_JUMP_TABLE_CORE (_bfd_nocore),
- BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
- BFD_JUMP_TABLE_SYMBOLS (coff),
- BFD_JUMP_TABLE_RELOCS (coff),
- BFD_JUMP_TABLE_WRITE (coff),
- BFD_JUMP_TABLE_LINK (coff),
- BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
-
- COFF_SWAP_TABLE,
-};
OpenPOWER on IntegriCloud