diff options
Diffstat (limited to 'contrib/gcc/config/i386/i386.h')
-rw-r--r-- | contrib/gcc/config/i386/i386.h | 1934 |
1 files changed, 1934 insertions, 0 deletions
diff --git a/contrib/gcc/config/i386/i386.h b/contrib/gcc/config/i386/i386.h new file mode 100644 index 0000000..b00b0e5 --- /dev/null +++ b/contrib/gcc/config/i386/i386.h @@ -0,0 +1,1934 @@ +/* Definitions of target machine for GNU compiler for Intel X86 + (386, 486, Pentium). + Copyright (C) 1988, 1992, 1994, 1995 Free Software Foundation, Inc. + +This file is part of GNU CC. + +GNU CC is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2, or (at your option) +any later version. + +GNU CC is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with GNU CC; see the file COPYING. If not, write to +the Free Software Foundation, 59 Temple Place - Suite 330, +Boston, MA 02111-1307, USA. */ + + +/* The purpose of this file is to define the characteristics of the i386, + independent of assembler syntax or operating system. + + Three other files build on this one to describe a specific assembler syntax: + bsd386.h, att386.h, and sun386.h. + + The actual tm.h file for a particular system should include + this file, and then the file for the appropriate assembler syntax. + + Many macros that specify assembler syntax are omitted entirely from + this file because they really belong in the files for particular + assemblers. These include AS1, AS2, AS3, RP, IP, LPREFIX, L_SIZE, + PUT_OP_SIZE, USE_STAR, ADDR_BEG, ADDR_END, PRINT_IREG, PRINT_SCALE, + PRINT_B_I_S, and many that start with ASM_ or end in ASM_OP. */ + +/* Names to predefine in the preprocessor for this target machine. */ + +#define I386 1 + +/* Stubs for half-pic support if not OSF/1 reference platform. */ + +#ifndef HALF_PIC_P +#define HALF_PIC_P() 0 +#define HALF_PIC_NUMBER_PTRS 0 +#define HALF_PIC_NUMBER_REFS 0 +#define HALF_PIC_ENCODE(DECL) +#define HALF_PIC_DECLARE(NAME) +#define HALF_PIC_INIT() error ("half-pic init called on systems that don't support it.") +#define HALF_PIC_ADDRESS_P(X) 0 +#define HALF_PIC_PTR(X) X +#define HALF_PIC_FINISH(STREAM) +#endif + +/* Run-time compilation parameters selecting different hardware subsets. */ + +extern int target_flags; + +/* Macros used in the machine description to test the flags. */ + +/* configure can arrange to make this 2, to force a 486. */ +#ifndef TARGET_CPU_DEFAULT +#define TARGET_CPU_DEFAULT 0 +#endif + +/* Masks for the -m switches */ +#define MASK_80387 000000000001 /* Hardware floating point */ +#define MASK_486 000000000002 /* 80486 specific */ +#define MASK_NOTUSED1 000000000004 /* bit not currently used */ +#define MASK_RTD 000000000010 /* Use ret that pops args */ +#define MASK_ALIGN_DOUBLE 000000000020 /* align doubles to 2 word boundary */ +#define MASK_SVR3_SHLIB 000000000040 /* Uninit locals into bss */ +#define MASK_IEEE_FP 000000000100 /* IEEE fp comparisons */ +#define MASK_FLOAT_RETURNS 000000000200 /* Return float in st(0) */ +#define MASK_NO_FANCY_MATH_387 000000000400 /* Disable sin, cos, sqrt */ + + /* Temporary codegen switches */ +#define MASK_DEBUG_ADDR 000001000000 /* Debug GO_IF_LEGITIMATE_ADDRESS */ +#define MASK_NO_WIDE_MULTIPLY 000002000000 /* Disable 32x32->64 multiplies */ +#define MASK_NO_MOVE 000004000000 /* Don't generate mem->mem */ +#define MASK_DEBUG_ARG 000010000000 /* Debug function_arg */ + +/* Use the floating point instructions */ +#define TARGET_80387 (target_flags & MASK_80387) + +/* Compile using ret insn that pops args. + This will not work unless you use prototypes at least + for all functions that can take varying numbers of args. */ +#define TARGET_RTD (target_flags & MASK_RTD) + +/* Align doubles to a two word boundary. This breaks compatibility with + the published ABI's for structures containing doubles, but produces + faster code on the pentium. */ +#define TARGET_ALIGN_DOUBLE (target_flags & MASK_ALIGN_DOUBLE) + +/* Put uninitialized locals into bss, not data. + Meaningful only on svr3. */ +#define TARGET_SVR3_SHLIB (target_flags & MASK_SVR3_SHLIB) + +/* Use IEEE floating point comparisons. These handle correctly the cases + where the result of a comparison is unordered. Normally SIGFPE is + generated in such cases, in which case this isn't needed. */ +#define TARGET_IEEE_FP (target_flags & MASK_IEEE_FP) + +/* Functions that return a floating point value may return that value + in the 387 FPU or in 386 integer registers. If set, this flag causes + the 387 to be used, which is compatible with most calling conventions. */ +#define TARGET_FLOAT_RETURNS_IN_80387 (target_flags & MASK_FLOAT_RETURNS) + +/* Disable generation of FP sin, cos and sqrt operations for 387. + This is because FreeBSD lacks these in the math-emulator-code */ +#define TARGET_NO_FANCY_MATH_387 (target_flags & MASK_NO_FANCY_MATH_387) + +/* Temporary switches for tuning code generation */ + +/* Disable 32x32->64 bit multiplies that are used for long long multiplies + and division by constants, but sometimes cause reload problems. */ +#define TARGET_NO_WIDE_MULTIPLY (target_flags & MASK_NO_WIDE_MULTIPLY) +#define TARGET_WIDE_MULTIPLY (!TARGET_NO_WIDE_MULTIPLY) + +/* Debug GO_IF_LEGITIMATE_ADDRESS */ +#define TARGET_DEBUG_ADDR (target_flags & MASK_DEBUG_ADDR) + +/* Debug FUNCTION_ARG macros */ +#define TARGET_DEBUG_ARG (target_flags & MASK_DEBUG_ARG) + +/* Hack macros for tuning code generation */ +#define TARGET_MOVE ((target_flags & MASK_NO_MOVE) == 0) /* Don't generate memory->memory */ + +/* Specific hardware switches */ +#define TARGET_486 (target_flags & MASK_486) /* 80486DX, 80486SX, 80486DX[24] */ +#define TARGET_386 (!TARGET_486) /* 80386 */ + +#define TARGET_SWITCHES \ +{ { "80387", MASK_80387 }, \ + { "no-80387", -MASK_80387 }, \ + { "hard-float", MASK_80387 }, \ + { "soft-float", -MASK_80387 }, \ + { "no-soft-float", MASK_80387 }, \ + { "386", -MASK_486 }, \ + { "no-386", MASK_486 }, \ + { "486", MASK_486 }, \ + { "no-486", -MASK_486 }, \ + { "rtd", MASK_RTD }, \ + { "no-rtd", -MASK_RTD }, \ + { "align-double", MASK_ALIGN_DOUBLE }, \ + { "no-align-double", -MASK_ALIGN_DOUBLE }, \ + { "svr3-shlib", MASK_SVR3_SHLIB }, \ + { "no-svr3-shlib", -MASK_SVR3_SHLIB }, \ + { "ieee-fp", MASK_IEEE_FP }, \ + { "no-ieee-fp", -MASK_IEEE_FP }, \ + { "fp-ret-in-387", MASK_FLOAT_RETURNS }, \ + { "no-fp-ret-in-387", -MASK_FLOAT_RETURNS }, \ + { "no-fancy-math-387", MASK_NO_FANCY_MATH_387 }, \ + { "fancy-math-387", -MASK_NO_FANCY_MATH_387 }, \ + { "no-wide-multiply", MASK_NO_WIDE_MULTIPLY }, \ + { "wide-multiply", -MASK_NO_WIDE_MULTIPLY }, \ + { "debug-addr", MASK_DEBUG_ADDR }, \ + { "no-debug-addr", -MASK_DEBUG_ADDR }, \ + { "move", -MASK_NO_MOVE }, \ + { "no-move", MASK_NO_MOVE }, \ + { "debug-arg", MASK_DEBUG_ARG }, \ + { "no-debug-arg", -MASK_DEBUG_ARG }, \ + SUBTARGET_SWITCHES \ + { "", TARGET_DEFAULT | TARGET_CPU_DEFAULT}} + +/* This macro is similar to `TARGET_SWITCHES' but defines names of + command options that have values. Its definition is an + initializer with a subgrouping for each command option. + + Each subgrouping contains a string constant, that defines the + fixed part of the option name, and the address of a variable. The + variable, type `char *', is set to the variable part of the given + option if the fixed part matches. The actual option name is made + by appending `-m' to the specified name. */ +#define TARGET_OPTIONS \ +{ { "reg-alloc=", &i386_reg_alloc_order }, \ + { "regparm=", &i386_regparm_string }, \ + { "align-loops=", &i386_align_loops_string }, \ + { "align-jumps=", &i386_align_jumps_string }, \ + { "align-functions=", &i386_align_funcs_string }, \ + SUBTARGET_OPTIONS \ +} + +/* Sometimes certain combinations of command options do not make + sense on a particular target machine. You can define a macro + `OVERRIDE_OPTIONS' to take account of this. This macro, if + defined, is executed once just after all the command options have + been parsed. + + Don't use this macro to turn on various extra optimizations for + `-O'. That is what `OPTIMIZATION_OPTIONS' is for. */ + +#define OVERRIDE_OPTIONS override_options () + +/* These are meant to be redefined in the host dependent files */ +#define SUBTARGET_SWITCHES +#define SUBTARGET_OPTIONS + + +/* target machine storage layout */ + +/* Define for XFmode extended real floating point support. + This will automatically cause REAL_ARITHMETIC to be defined. */ +#define LONG_DOUBLE_TYPE_SIZE 96 + +/* Define if you don't want extended real, but do want to use the + software floating point emulator for REAL_ARITHMETIC and + decimal <-> binary conversion. */ +/* #define REAL_ARITHMETIC */ + +/* Define this if most significant byte of a word is the lowest numbered. */ +/* That is true on the 80386. */ + +#define BITS_BIG_ENDIAN 0 + +/* Define this if most significant byte of a word is the lowest numbered. */ +/* That is not true on the 80386. */ +#define BYTES_BIG_ENDIAN 0 + +/* Define this if most significant word of a multiword number is the lowest + numbered. */ +/* Not true for 80386 */ +#define WORDS_BIG_ENDIAN 0 + +/* number of bits in an addressable storage unit */ +#define BITS_PER_UNIT 8 + +/* Width in bits of a "word", which is the contents of a machine register. + Note that this is not necessarily the width of data type `int'; + if using 16-bit ints on a 80386, this would still be 32. + But on a machine with 16-bit registers, this would be 16. */ +#define BITS_PER_WORD 32 + +/* Width of a word, in units (bytes). */ +#define UNITS_PER_WORD 4 + +/* Width in bits of a pointer. + See also the macro `Pmode' defined below. */ +#define POINTER_SIZE 32 + +/* Allocation boundary (in *bits*) for storing arguments in argument list. */ +#define PARM_BOUNDARY 32 + +/* Boundary (in *bits*) on which stack pointer should be aligned. */ +#define STACK_BOUNDARY 32 + +/* Allocation boundary (in *bits*) for the code of a function. + For i486, we get better performance by aligning to a cache + line (i.e. 16 byte) boundary. */ +#define FUNCTION_BOUNDARY (1 << (i386_align_funcs + 3)) + +/* Alignment of field after `int : 0' in a structure. */ + +#define EMPTY_FIELD_BOUNDARY 32 + +/* Minimum size in bits of the largest boundary to which any + and all fundamental data types supported by the hardware + might need to be aligned. No data type wants to be aligned + rounder than this. The i386 supports 64-bit floating point + quantities, but these can be aligned on any 32-bit boundary. + The published ABIs say that doubles should be aligned on word + boundaries, but the Pentium gets better performance with them + aligned on 64 bit boundaries. */ +#define BIGGEST_ALIGNMENT (TARGET_ALIGN_DOUBLE ? 64 : 32) + +/* Set this non-zero if move instructions will actually fail to work + when given unaligned data. */ +#define STRICT_ALIGNMENT 0 + +/* If bit field type is int, don't let it cross an int, + and give entire struct the alignment of an int. */ +/* Required on the 386 since it doesn't have bitfield insns. */ +#define PCC_BITFIELD_TYPE_MATTERS 1 + +/* Maximum power of 2 that code can be aligned to. */ +#define MAX_CODE_ALIGN 6 /* 64 byte alignment */ + +/* Align loop starts for optimal branching. */ +#define ASM_OUTPUT_LOOP_ALIGN(FILE) ASM_OUTPUT_ALIGN (FILE, i386_align_loops) + +/* This is how to align an instruction for optimal branching. + On i486 we'll get better performance by aligning on a + cache line (i.e. 16 byte) boundary. */ +#define ASM_OUTPUT_ALIGN_CODE(FILE) ASM_OUTPUT_ALIGN ((FILE), i386_align_jumps) + + +/* Standard register usage. */ + +/* This processor has special stack-like registers. See reg-stack.c + for details. */ + +#define STACK_REGS + +/* Number of actual hardware registers. + The hardware registers are assigned numbers for the compiler + from 0 to just below FIRST_PSEUDO_REGISTER. + All registers that the compiler knows about must be given numbers, + even those that are not normally considered general registers. + + In the 80386 we give the 8 general purpose registers the numbers 0-7. + We number the floating point registers 8-15. + Note that registers 0-7 can be accessed as a short or int, + while only 0-3 may be used with byte `mov' instructions. + + Reg 16 does not correspond to any hardware register, but instead + appears in the RTL as an argument pointer prior to reload, and is + eliminated during reloading in favor of either the stack or frame + pointer. */ + +#define FIRST_PSEUDO_REGISTER 17 + +/* 1 for registers that have pervasive standard uses + and are not available for the register allocator. + On the 80386, the stack pointer is such, as is the arg pointer. */ +#define FIXED_REGISTERS \ +/*ax,dx,cx,bx,si,di,bp,sp,st,st1,st2,st3,st4,st5,st6,st7,arg*/ \ +{ 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1 } + +/* 1 for registers not available across function calls. + These must include the FIXED_REGISTERS and also any + registers that can be used without being saved. + The latter must include the registers where values are returned + and the register where structure-value addresses are passed. + Aside from that, you can include as many other registers as you like. */ + +#define CALL_USED_REGISTERS \ +/*ax,dx,cx,bx,si,di,bp,sp,st,st1,st2,st3,st4,st5,st6,st7,arg*/ \ +{ 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 } + +/* Order in which to allocate registers. Each register must be + listed once, even those in FIXED_REGISTERS. List frame pointer + late and fixed registers last. Note that, in general, we prefer + registers listed in CALL_USED_REGISTERS, keeping the others + available for storage of persistent values. + + Three different versions of REG_ALLOC_ORDER have been tried: + + If the order is edx, ecx, eax, ... it produces a slightly faster compiler, + but slower code on simple functions returning values in eax. + + If the order is eax, ecx, edx, ... it causes reload to abort when compiling + perl 4.036 due to not being able to create a DImode register (to hold a 2 + word union). + + If the order is eax, edx, ecx, ... it produces better code for simple + functions, and a slightly slower compiler. Users complained about the code + generated by allocating edx first, so restore the 'natural' order of things. */ + +#define REG_ALLOC_ORDER \ +/*ax,dx,cx,bx,si,di,bp,sp,st,st1,st2,st3,st4,st5,st6,st7,arg*/ \ +{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 } + +/* A C statement (sans semicolon) to choose the order in which to + allocate hard registers for pseudo-registers local to a basic + block. + + Store the desired register order in the array `reg_alloc_order'. + Element 0 should be the register to allocate first; element 1, the + next register; and so on. + + The macro body should not assume anything about the contents of + `reg_alloc_order' before execution of the macro. + + On most machines, it is not necessary to define this macro. */ + +#define ORDER_REGS_FOR_LOCAL_ALLOC order_regs_for_local_alloc () + +/* Macro to conditionally modify fixed_regs/call_used_regs. */ +#define CONDITIONAL_REGISTER_USAGE \ + { \ + if (flag_pic) \ + { \ + fixed_regs[PIC_OFFSET_TABLE_REGNUM] = 1; \ + call_used_regs[PIC_OFFSET_TABLE_REGNUM] = 1; \ + } \ + if (! TARGET_80387 && ! TARGET_FLOAT_RETURNS_IN_80387) \ + { \ + int i; \ + HARD_REG_SET x; \ + COPY_HARD_REG_SET (x, reg_class_contents[(int)FLOAT_REGS]); \ + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++ ) \ + if (TEST_HARD_REG_BIT (x, i)) \ + fixed_regs[i] = call_used_regs[i] = 1; \ + } \ + } + +/* Return number of consecutive hard regs needed starting at reg REGNO + to hold something of mode MODE. + This is ordinarily the length in words of a value of mode MODE + but can be less for certain modes in special long registers. + + Actually there are no two word move instructions for consecutive + registers. And only registers 0-3 may have mov byte instructions + applied to them. + */ + +#define HARD_REGNO_NREGS(REGNO, MODE) \ + (FP_REGNO_P (REGNO) ? 1 \ + : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)) + +/* Value is 1 if hard register REGNO can hold a value of machine-mode MODE. + On the 80386, the first 4 cpu registers can hold any mode + while the floating point registers may hold only floating point. + Make it clear that the fp regs could not hold a 16-byte float. */ + +/* The casts to int placate a compiler on a microvax, + for cross-compiler testing. */ + +#define HARD_REGNO_MODE_OK(REGNO, MODE) \ + ((REGNO) < 2 ? 1 \ + : (REGNO) < 4 ? 1 \ + : FP_REGNO_P (REGNO) \ + ? (((int) GET_MODE_CLASS (MODE) == (int) MODE_FLOAT \ + || (int) GET_MODE_CLASS (MODE) == (int) MODE_COMPLEX_FLOAT) \ + && GET_MODE_UNIT_SIZE (MODE) <= 12) \ + : (int) (MODE) != (int) QImode) + +/* Value is 1 if it is a good idea to tie two pseudo registers + when one has mode MODE1 and one has mode MODE2. + If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2, + for any hard reg, then this must be 0 for correct output. */ + +#define MODES_TIEABLE_P(MODE1, MODE2) ((MODE1) == (MODE2)) + +/* A C expression returning the cost of moving data from a register of class + CLASS1 to one of CLASS2. + + On the i386, copying between floating-point and fixed-point + registers is expensive. */ + +#define REGISTER_MOVE_COST(CLASS1, CLASS2) \ + (((FLOAT_CLASS_P (CLASS1) && ! FLOAT_CLASS_P (CLASS2)) \ + || (! FLOAT_CLASS_P (CLASS1) && FLOAT_CLASS_P (CLASS2))) ? 10 \ + : 2) + +/* Specify the registers used for certain standard purposes. + The values of these macros are register numbers. */ + +/* on the 386 the pc register is %eip, and is not usable as a general + register. The ordinary mov instructions won't work */ +/* #define PC_REGNUM */ + +/* Register to use for pushing function arguments. */ +#define STACK_POINTER_REGNUM 7 + +/* Base register for access to local variables of the function. */ +#define FRAME_POINTER_REGNUM 6 + +/* First floating point reg */ +#define FIRST_FLOAT_REG 8 + +/* First & last stack-like regs */ +#define FIRST_STACK_REG FIRST_FLOAT_REG +#define LAST_STACK_REG (FIRST_FLOAT_REG + 7) + +/* Value should be nonzero if functions must have frame pointers. + Zero means the frame pointer need not be set up (and parms + may be accessed via the stack pointer) in functions that seem suitable. + This is computed in `reload', in reload1.c. */ +#define FRAME_POINTER_REQUIRED 0 + +/* Base register for access to arguments of the function. */ +#define ARG_POINTER_REGNUM 16 + +/* Register in which static-chain is passed to a function. */ +#define STATIC_CHAIN_REGNUM 2 + +/* Register to hold the addressing base for position independent + code access to data items. */ +#define PIC_OFFSET_TABLE_REGNUM 3 + +/* Register in which address to store a structure value + arrives in the function. On the 386, the prologue + copies this from the stack to register %eax. */ +#define STRUCT_VALUE_INCOMING 0 + +/* Place in which caller passes the structure value address. + 0 means push the value on the stack like an argument. */ +#define STRUCT_VALUE 0 + +/* A C expression which can inhibit the returning of certain function + values in registers, based on the type of value. A nonzero value + says to return the function value in memory, just as large + structures are always returned. Here TYPE will be a C expression + of type `tree', representing the data type of the value. + + Note that values of mode `BLKmode' must be explicitly handled by + this macro. Also, the option `-fpcc-struct-return' takes effect + regardless of this macro. On most systems, it is possible to + leave the macro undefined; this causes a default definition to be + used, whose value is the constant 1 for `BLKmode' values, and 0 + otherwise. + + Do not use this macro to indicate that structures and unions + should always be returned in memory. You should instead use + `DEFAULT_PCC_STRUCT_RETURN' to indicate this. */ + +#define RETURN_IN_MEMORY(TYPE) \ + ((TYPE_MODE (TYPE) == BLKmode) || int_size_in_bytes (TYPE) > 12) + + +/* Define the classes of registers for register constraints in the + machine description. Also define ranges of constants. + + One of the classes must always be named ALL_REGS and include all hard regs. + If there is more than one class, another class must be named NO_REGS + and contain no registers. + + The name GENERAL_REGS must be the name of a class (or an alias for + another name such as ALL_REGS). This is the class of registers + that is allowed by "g" or "r" in a register constraint. + Also, registers outside this class are allocated only when + instructions express preferences for them. + + The classes must be numbered in nondecreasing order; that is, + a larger-numbered class must never be contained completely + in a smaller-numbered class. + + For any two classes, it is very desirable that there be another + class that represents their union. + + It might seem that class BREG is unnecessary, since no useful 386 + opcode needs reg %ebx. But some systems pass args to the OS in ebx, + and the "b" register constraint is useful in asms for syscalls. */ + +enum reg_class +{ + NO_REGS, + AREG, DREG, CREG, BREG, + AD_REGS, /* %eax/%edx for DImode */ + Q_REGS, /* %eax %ebx %ecx %edx */ + SIREG, DIREG, + INDEX_REGS, /* %eax %ebx %ecx %edx %esi %edi %ebp */ + GENERAL_REGS, /* %eax %ebx %ecx %edx %esi %edi %ebp %esp */ + FP_TOP_REG, FP_SECOND_REG, /* %st(0) %st(1) */ + FLOAT_REGS, + ALL_REGS, LIM_REG_CLASSES +}; + +#define N_REG_CLASSES (int) LIM_REG_CLASSES + +#define FLOAT_CLASS_P(CLASS) (reg_class_subset_p (CLASS, FLOAT_REGS)) + +/* Give names of register classes as strings for dump file. */ + +#define REG_CLASS_NAMES \ +{ "NO_REGS", \ + "AREG", "DREG", "CREG", "BREG", \ + "AD_REGS", \ + "Q_REGS", \ + "SIREG", "DIREG", \ + "INDEX_REGS", \ + "GENERAL_REGS", \ + "FP_TOP_REG", "FP_SECOND_REG", \ + "FLOAT_REGS", \ + "ALL_REGS" } + +/* Define which registers fit in which classes. + This is an initializer for a vector of HARD_REG_SET + of length N_REG_CLASSES. */ + +#define REG_CLASS_CONTENTS \ +{ 0, \ + 0x1, 0x2, 0x4, 0x8, /* AREG, DREG, CREG, BREG */ \ + 0x3, /* AD_REGS */ \ + 0xf, /* Q_REGS */ \ + 0x10, 0x20, /* SIREG, DIREG */ \ + 0x07f, /* INDEX_REGS */ \ + 0x100ff, /* GENERAL_REGS */ \ + 0x0100, 0x0200, /* FP_TOP_REG, FP_SECOND_REG */ \ + 0xff00, /* FLOAT_REGS */ \ + 0x1ffff } + +/* The same information, inverted: + Return the class number of the smallest class containing + reg number REGNO. This could be a conditional expression + or could index an array. */ + +#define REGNO_REG_CLASS(REGNO) (regclass_map[REGNO]) + +/* When defined, the compiler allows registers explicitly used in the + rtl to be used as spill registers but prevents the compiler from + extending the lifetime of these registers. */ + +#define SMALL_REGISTER_CLASSES + +#define QI_REG_P(X) \ + (REG_P (X) && REGNO (X) < 4) +#define NON_QI_REG_P(X) \ + (REG_P (X) && REGNO (X) >= 4 && REGNO (X) < FIRST_PSEUDO_REGISTER) + +#define FP_REG_P(X) (REG_P (X) && FP_REGNO_P (REGNO (X))) +#define FP_REGNO_P(n) ((n) >= FIRST_STACK_REG && (n) <= LAST_STACK_REG) + +#define STACK_REG_P(xop) (REG_P (xop) && \ + REGNO (xop) >= FIRST_STACK_REG && \ + REGNO (xop) <= LAST_STACK_REG) + +#define NON_STACK_REG_P(xop) (REG_P (xop) && ! STACK_REG_P (xop)) + +#define STACK_TOP_P(xop) (REG_P (xop) && REGNO (xop) == FIRST_STACK_REG) + +/* Try to maintain the accuracy of the death notes for regs satisfying the + following. Important for stack like regs, to know when to pop. */ + +/* #define PRESERVE_DEATH_INFO_REGNO_P(x) FP_REGNO_P(x) */ + +/* 1 if register REGNO can magically overlap other regs. + Note that nonzero values work only in very special circumstances. */ + +/* #define OVERLAPPING_REGNO_P(REGNO) FP_REGNO_P (REGNO) */ + +/* The class value for index registers, and the one for base regs. */ + +#define INDEX_REG_CLASS INDEX_REGS +#define BASE_REG_CLASS GENERAL_REGS + +/* Get reg_class from a letter such as appears in the machine description. */ + +#define REG_CLASS_FROM_LETTER(C) \ + ((C) == 'r' ? GENERAL_REGS : \ + (C) == 'q' ? Q_REGS : \ + (C) == 'f' ? (TARGET_80387 || TARGET_FLOAT_RETURNS_IN_80387 \ + ? FLOAT_REGS \ + : NO_REGS) : \ + (C) == 't' ? (TARGET_80387 || TARGET_FLOAT_RETURNS_IN_80387 \ + ? FP_TOP_REG \ + : NO_REGS) : \ + (C) == 'u' ? (TARGET_80387 || TARGET_FLOAT_RETURNS_IN_80387 \ + ? FP_SECOND_REG \ + : NO_REGS) : \ + (C) == 'a' ? AREG : \ + (C) == 'b' ? BREG : \ + (C) == 'c' ? CREG : \ + (C) == 'd' ? DREG : \ + (C) == 'A' ? AD_REGS : \ + (C) == 'D' ? DIREG : \ + (C) == 'S' ? SIREG : NO_REGS) + +/* The letters I, J, K, L and M in a register constraint string + can be used to stand for particular ranges of immediate operands. + This macro defines what the ranges are. + C is the letter, and VALUE is a constant value. + Return 1 if VALUE is in the range specified by C. + + I is for non-DImode shifts. + J is for DImode shifts. + K and L are for an `andsi' optimization. + M is for shifts that can be executed by the "lea" opcode. + */ + +#define CONST_OK_FOR_LETTER_P(VALUE, C) \ + ((C) == 'I' ? (VALUE) >= 0 && (VALUE) <= 31 : \ + (C) == 'J' ? (VALUE) >= 0 && (VALUE) <= 63 : \ + (C) == 'K' ? (VALUE) == 0xff : \ + (C) == 'L' ? (VALUE) == 0xffff : \ + (C) == 'M' ? (VALUE) >= 0 && (VALUE) <= 3 : \ + (C) == 'N' ? (VALUE) >= 0 && (VALUE) <= 255 :\ + 0) + +/* Similar, but for floating constants, and defining letters G and H. + Here VALUE is the CONST_DOUBLE rtx itself. We allow constants even if + TARGET_387 isn't set, because the stack register converter may need to + load 0.0 into the function value register. */ + +#define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \ + ((C) == 'G' ? standard_80387_constant_p (VALUE) : 0) + +/* Place additional restrictions on the register class to use when it + is necessary to be able to hold a value of mode MODE in a reload + register for which class CLASS would ordinarily be used. */ + +#define LIMIT_RELOAD_CLASS(MODE, CLASS) \ + ((MODE) == QImode && ((CLASS) == ALL_REGS || (CLASS) == GENERAL_REGS) \ + ? Q_REGS : (CLASS)) + +/* Given an rtx X being reloaded into a reg required to be + in class CLASS, return the class of reg to actually use. + In general this is just CLASS; but on some machines + in some cases it is preferable to use a more restrictive class. + On the 80386 series, we prevent floating constants from being + reloaded into floating registers (since no move-insn can do that) + and we ensure that QImodes aren't reloaded into the esi or edi reg. */ + +/* Put float CONST_DOUBLE in the constant pool instead of fp regs. + QImode must go into class Q_REGS. + Narrow ALL_REGS to GENERAL_REGS. This supports allowing movsf and + movdf to do mem-to-mem moves through integer regs. */ + +#define PREFERRED_RELOAD_CLASS(X,CLASS) \ + (GET_CODE (X) == CONST_DOUBLE && GET_MODE (X) != VOIDmode ? NO_REGS \ + : GET_MODE (X) == QImode && ! reg_class_subset_p (CLASS, Q_REGS) ? Q_REGS \ + : ((CLASS) == ALL_REGS \ + && GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT) ? GENERAL_REGS \ + : (CLASS)) + +/* If we are copying between general and FP registers, we need a memory + location. */ + +#define SECONDARY_MEMORY_NEEDED(CLASS1,CLASS2,MODE) \ + ((FLOAT_CLASS_P (CLASS1) && ! FLOAT_CLASS_P (CLASS2)) \ + || (! FLOAT_CLASS_P (CLASS1) && FLOAT_CLASS_P (CLASS2))) + +/* Return the maximum number of consecutive registers + needed to represent mode MODE in a register of class CLASS. */ +/* On the 80386, this is the size of MODE in words, + except in the FP regs, where a single reg is always enough. */ +#define CLASS_MAX_NREGS(CLASS, MODE) \ + (FLOAT_CLASS_P (CLASS) ? 1 : \ + ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)) + +/* A C expression whose value is nonzero if pseudos that have been + assigned to registers of class CLASS would likely be spilled + because registers of CLASS are needed for spill registers. + + The default value of this macro returns 1 if CLASS has exactly one + register and zero otherwise. On most machines, this default + should be used. Only define this macro to some other expression + if pseudo allocated by `local-alloc.c' end up in memory because + their hard registers were needed for spill registers. If this + macro returns nonzero for those classes, those pseudos will only + be allocated by `global.c', which knows how to reallocate the + pseudo to another register. If there would not be another + register available for reallocation, you should not change the + definition of this macro since the only effect of such a + definition would be to slow down register allocation. */ + +#define CLASS_LIKELY_SPILLED_P(CLASS) \ + (((CLASS) == AREG) \ + || ((CLASS) == DREG) \ + || ((CLASS) == CREG) \ + || ((CLASS) == BREG) \ + || ((CLASS) == AD_REGS) \ + || ((CLASS) == SIREG) \ + || ((CLASS) == DIREG)) + + +/* Stack layout; function entry, exit and calling. */ + +/* Define this if pushing a word on the stack + makes the stack pointer a smaller address. */ +#define STACK_GROWS_DOWNWARD + +/* Define this if the nominal address of the stack frame + is at the high-address end of the local variables; + that is, each additional local variable allocated + goes at a more negative offset in the frame. */ +#define FRAME_GROWS_DOWNWARD + +/* Offset within stack frame to start allocating local variables at. + If FRAME_GROWS_DOWNWARD, this is the offset to the END of the + first local allocated. Otherwise, it is the offset to the BEGINNING + of the first local allocated. */ +#define STARTING_FRAME_OFFSET 0 + +/* If we generate an insn to push BYTES bytes, + this says how many the stack pointer really advances by. + On 386 pushw decrements by exactly 2 no matter what the position was. + On the 386 there is no pushb; we use pushw instead, and this + has the effect of rounding up to 2. */ + +#define PUSH_ROUNDING(BYTES) (((BYTES) + 1) & (-2)) + +/* Offset of first parameter from the argument pointer register value. */ +#define FIRST_PARM_OFFSET(FNDECL) 0 + +/* Value is the number of bytes of arguments automatically + popped when returning from a subroutine call. + FUNDECL is the declaration node of the function (as a tree), + FUNTYPE is the data type of the function (as a tree), + or for a library call it is an identifier node for the subroutine name. + SIZE is the number of bytes of arguments passed on the stack. + + On the 80386, the RTD insn may be used to pop them if the number + of args is fixed, but if the number is variable then the caller + must pop them all. RTD can't be used for library calls now + because the library is compiled with the Unix compiler. + Use of RTD is a selectable option, since it is incompatible with + standard Unix calling sequences. If the option is not selected, + the caller must always pop the args. + + The attribute stdcall is equivalent to RTD on a per module basis. */ + +#define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) \ + (i386_return_pops_args (FUNDECL, FUNTYPE, SIZE)) + +/* Define how to find the value returned by a function. + VALTYPE is the data type of the value (as a tree). + If the precise function being called is known, FUNC is its FUNCTION_DECL; + otherwise, FUNC is 0. */ +#define FUNCTION_VALUE(VALTYPE, FUNC) \ + gen_rtx (REG, TYPE_MODE (VALTYPE), \ + VALUE_REGNO (TYPE_MODE (VALTYPE))) + +/* Define how to find the value returned by a library function + assuming the value has mode MODE. */ + +#define LIBCALL_VALUE(MODE) \ + gen_rtx (REG, MODE, VALUE_REGNO (MODE)) + +/* Define the size of the result block used for communication between + untyped_call and untyped_return. The block contains a DImode value + followed by the block used by fnsave and frstor. */ + +#define APPLY_RESULT_SIZE (8+108) + +/* 1 if N is a possible register number for function argument passing. */ +#define FUNCTION_ARG_REGNO_P(N) ((N) >= 0 && (N) < REGPARM_MAX) + +/* Define a data type for recording info about an argument list + during the scan of that argument list. This data type should + hold all necessary information about the function itself + and about the args processed so far, enough to enable macros + such as FUNCTION_ARG to determine where the next arg should go. */ + +typedef struct i386_args { + int words; /* # words passed so far */ + int nregs; /* # registers available for passing */ + int regno; /* next available register number */ +} CUMULATIVE_ARGS; + +/* Initialize a variable CUM of type CUMULATIVE_ARGS + for a call to a function whose data type is FNTYPE. + For a library call, FNTYPE is 0. */ + +#define INIT_CUMULATIVE_ARGS(CUM,FNTYPE,LIBNAME) \ + (init_cumulative_args (&CUM, FNTYPE, LIBNAME)) + +/* Update the data in CUM to advance over an argument + of mode MODE and data type TYPE. + (TYPE is null for libcalls where that information may not be available.) */ + +#define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \ + (function_arg_advance (&CUM, MODE, TYPE, NAMED)) + +/* Define where to put the arguments to a function. + Value is zero to push the argument on the stack, + or a hard register in which to store the argument. + + MODE is the argument's machine mode. + TYPE is the data type of the argument (as a tree). + This is null for libcalls where that information may + not be available. + CUM is a variable of type CUMULATIVE_ARGS which gives info about + the preceding args and about the function being called. + NAMED is nonzero if this argument is a named parameter + (otherwise it is an extra parameter matching an ellipsis). */ + +#define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \ + (function_arg (&CUM, MODE, TYPE, NAMED)) + +/* For an arg passed partly in registers and partly in memory, + this is the number of registers used. + For args passed entirely in registers or entirely in memory, zero. */ + +#define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) \ + (function_arg_partial_nregs (&CUM, MODE, TYPE, NAMED)) + +/* This macro generates the assembly code for function entry. + FILE is a stdio stream to output the code to. + SIZE is an int: how many units of temporary storage to allocate. + Refer to the array `regs_ever_live' to determine which registers + to save; `regs_ever_live[I]' is nonzero if register number I + is ever used in the function. This macro is responsible for + knowing which registers should not be saved even if used. */ + +#define FUNCTION_PROLOGUE(FILE, SIZE) \ + function_prologue (FILE, SIZE) + +/* Output assembler code to FILE to increment profiler label # LABELNO + for profiling a function entry. */ + +#define FUNCTION_PROFILER(FILE, LABELNO) \ +{ \ + if (flag_pic) \ + { \ + fprintf (FILE, "\tleal %sP%d@GOTOFF(%%ebx),%%edx\n", \ + LPREFIX, (LABELNO)); \ + fprintf (FILE, "\tcall *_mcount@GOT(%%ebx)\n"); \ + } \ + else \ + { \ + fprintf (FILE, "\tmovl $%sP%d,%%edx\n", LPREFIX, (LABELNO)); \ + fprintf (FILE, "\tcall _mcount\n"); \ + } \ +} + +/* A C statement or compound statement to output to FILE some + assembler code to initialize basic-block profiling for the current + object module. This code should call the subroutine + `__bb_init_func' once per object module, passing it as its sole + argument the address of a block allocated in the object module. + + The name of the block is a local symbol made with this statement: + + ASM_GENERATE_INTERNAL_LABEL (BUFFER, "LPBX", 0); + + Of course, since you are writing the definition of + `ASM_GENERATE_INTERNAL_LABEL' as well as that of this macro, you + can take a short cut in the definition of this macro and use the + name that you know will result. + + The first word of this block is a flag which will be nonzero if the + object module has already been initialized. So test this word + first, and do not call `__bb_init_func' if the flag is nonzero. */ + +#undef FUNCTION_BLOCK_PROFILER +#define FUNCTION_BLOCK_PROFILER(STREAM, LABELNO) \ +do \ + { \ + static int num_func = 0; \ + rtx xops[8]; \ + char block_table[80], false_label[80]; \ + \ + ASM_GENERATE_INTERNAL_LABEL (block_table, "LPBX", 0); \ + ASM_GENERATE_INTERNAL_LABEL (false_label, "LPBZ", num_func); \ + \ + xops[0] = const0_rtx; \ + xops[1] = gen_rtx (SYMBOL_REF, VOIDmode, block_table); \ + xops[2] = gen_rtx (MEM, Pmode, gen_rtx (SYMBOL_REF, VOIDmode, false_label)); \ + xops[3] = gen_rtx (MEM, Pmode, gen_rtx (SYMBOL_REF, VOIDmode, "__bb_init_func")); \ + xops[4] = gen_rtx (MEM, Pmode, xops[1]); \ + xops[5] = stack_pointer_rtx; \ + xops[6] = GEN_INT (4); \ + xops[7] = gen_rtx (REG, Pmode, 0); /* eax */ \ + \ + CONSTANT_POOL_ADDRESS_P (xops[1]) = TRUE; \ + CONSTANT_POOL_ADDRESS_P (xops[2]) = TRUE; \ + \ + output_asm_insn (AS2(cmp%L4,%0,%4), xops); \ + output_asm_insn (AS1(jne,%2), xops); \ + \ + if (!flag_pic) \ + output_asm_insn (AS1(push%L1,%1), xops); \ + else \ + { \ + output_asm_insn (AS2 (lea%L7,%a1,%7), xops); \ + output_asm_insn (AS1 (push%L7,%7), xops); \ + } \ + \ + output_asm_insn (AS1(call,%P3), xops); \ + output_asm_insn (AS2(add%L0,%6,%5), xops); \ + ASM_OUTPUT_INTERNAL_LABEL (STREAM, "LPBZ", num_func); \ + num_func++; \ + } \ +while (0) + + +/* A C statement or compound statement to increment the count + associated with the basic block number BLOCKNO. Basic blocks are + numbered separately from zero within each compilation. The count + associated with block number BLOCKNO is at index BLOCKNO in a + vector of words; the name of this array is a local symbol made + with this statement: + + ASM_GENERATE_INTERNAL_LABEL (BUFFER, "LPBX", 2); + + Of course, since you are writing the definition of + `ASM_GENERATE_INTERNAL_LABEL' as well as that of this macro, you + can take a short cut in the definition of this macro and use the + name that you know will result. */ + +#define BLOCK_PROFILER(STREAM, BLOCKNO) \ +do \ + { \ + rtx xops[1], cnt_rtx; \ + char counts[80]; \ + \ + ASM_GENERATE_INTERNAL_LABEL (counts, "LPBX", 2); \ + cnt_rtx = gen_rtx (SYMBOL_REF, VOIDmode, counts); \ + SYMBOL_REF_FLAG (cnt_rtx) = TRUE; \ + \ + if (BLOCKNO) \ + cnt_rtx = plus_constant (cnt_rtx, (BLOCKNO)*4); \ + \ + if (flag_pic) \ + cnt_rtx = gen_rtx (PLUS, Pmode, pic_offset_table_rtx, cnt_rtx); \ + \ + xops[0] = gen_rtx (MEM, SImode, cnt_rtx); \ + output_asm_insn (AS1(inc%L0,%0), xops); \ + } \ +while (0) + +/* EXIT_IGNORE_STACK should be nonzero if, when returning from a function, + the stack pointer does not matter. The value is tested only in + functions that have frame pointers. + No definition is equivalent to always zero. */ +/* Note on the 386 it might be more efficient not to define this since + we have to restore it ourselves from the frame pointer, in order to + use pop */ + +#define EXIT_IGNORE_STACK 1 + +/* This macro generates the assembly code for function exit, + on machines that need it. If FUNCTION_EPILOGUE is not defined + then individual return instructions are generated for each + return statement. Args are same as for FUNCTION_PROLOGUE. + + The function epilogue should not depend on the current stack pointer! + It should use the frame pointer only. This is mandatory because + of alloca; we also take advantage of it to omit stack adjustments + before returning. + + If the last non-note insn in the function is a BARRIER, then there + is no need to emit a function prologue, because control does not fall + off the end. This happens if the function ends in an "exit" call, or + if a `return' insn is emitted directly into the function. */ + +#define FUNCTION_EPILOGUE(FILE, SIZE) \ +do { \ + rtx last = get_last_insn (); \ + if (last && GET_CODE (last) == NOTE) \ + last = prev_nonnote_insn (last); \ + if (! last || GET_CODE (last) != BARRIER) \ + function_epilogue (FILE, SIZE); \ +} while (0) + +/* Output assembler code for a block containing the constant parts + of a trampoline, leaving space for the variable parts. */ + +/* On the 386, the trampoline contains three instructions: + mov #STATIC,ecx + mov #FUNCTION,eax + jmp @eax */ +#define TRAMPOLINE_TEMPLATE(FILE) \ +{ \ + ASM_OUTPUT_CHAR (FILE, GEN_INT (0xb9)); \ + ASM_OUTPUT_SHORT (FILE, const0_rtx); \ + ASM_OUTPUT_SHORT (FILE, const0_rtx); \ + ASM_OUTPUT_CHAR (FILE, GEN_INT (0xb8)); \ + ASM_OUTPUT_SHORT (FILE, const0_rtx); \ + ASM_OUTPUT_SHORT (FILE, const0_rtx); \ + ASM_OUTPUT_CHAR (FILE, GEN_INT (0xff)); \ + ASM_OUTPUT_CHAR (FILE, GEN_INT (0xe0)); \ +} + +/* Length in units of the trampoline for entering a nested function. */ + +#define TRAMPOLINE_SIZE 12 + +/* Emit RTL insns to initialize the variable parts of a trampoline. + FNADDR is an RTX for the address of the function's pure code. + CXT is an RTX for the static chain value for the function. */ + +#define INITIALIZE_TRAMPOLINE(TRAMP, FNADDR, CXT) \ +{ \ + emit_move_insn (gen_rtx (MEM, SImode, plus_constant (TRAMP, 1)), CXT); \ + emit_move_insn (gen_rtx (MEM, SImode, plus_constant (TRAMP, 6)), FNADDR); \ +} + +/* Definitions for register eliminations. + + This is an array of structures. Each structure initializes one pair + of eliminable registers. The "from" register number is given first, + followed by "to". Eliminations of the same "from" register are listed + in order of preference. + + We have two registers that can be eliminated on the i386. First, the + frame pointer register can often be eliminated in favor of the stack + pointer register. Secondly, the argument pointer register can always be + eliminated; it is replaced with either the stack or frame pointer. */ + +#define ELIMINABLE_REGS \ +{{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ + { ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \ + { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}} + +/* Given FROM and TO register numbers, say whether this elimination is allowed. + Frame pointer elimination is automatically handled. + + For the i386, if frame pointer elimination is being done, we would like to + convert ap into sp, not fp. + + All other eliminations are valid. */ + +#define CAN_ELIMINATE(FROM, TO) \ + ((FROM) == ARG_POINTER_REGNUM && (TO) == STACK_POINTER_REGNUM \ + ? ! frame_pointer_needed \ + : 1) + +/* Define the offset between two registers, one to be eliminated, and the other + its replacement, at the start of a routine. */ + +#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \ +{ \ + if ((FROM) == ARG_POINTER_REGNUM && (TO) == FRAME_POINTER_REGNUM) \ + (OFFSET) = 8; /* Skip saved PC and previous frame pointer */ \ + else \ + { \ + int regno; \ + int offset = 0; \ + \ + for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) \ + if ((regs_ever_live[regno] && ! call_used_regs[regno]) \ + || (current_function_uses_pic_offset_table \ + && regno == PIC_OFFSET_TABLE_REGNUM)) \ + offset += 4; \ + \ + (OFFSET) = offset + get_frame_size (); \ + \ + if ((FROM) == ARG_POINTER_REGNUM && (TO) == STACK_POINTER_REGNUM) \ + (OFFSET) += 4; /* Skip saved PC */ \ + } \ +} + +/* Addressing modes, and classification of registers for them. */ + +/* #define HAVE_POST_INCREMENT */ +/* #define HAVE_POST_DECREMENT */ + +/* #define HAVE_PRE_DECREMENT */ +/* #define HAVE_PRE_INCREMENT */ + +/* Macros to check register numbers against specific register classes. */ + +/* These assume that REGNO is a hard or pseudo reg number. + They give nonzero only if REGNO is a hard reg of the suitable class + or a pseudo reg currently allocated to a suitable hard reg. + Since they use reg_renumber, they are safe only once reg_renumber + has been allocated, which happens in local-alloc.c. */ + +#define REGNO_OK_FOR_INDEX_P(REGNO) \ + ((REGNO) < STACK_POINTER_REGNUM \ + || (unsigned) reg_renumber[REGNO] < STACK_POINTER_REGNUM) + +#define REGNO_OK_FOR_BASE_P(REGNO) \ + ((REGNO) <= STACK_POINTER_REGNUM \ + || (REGNO) == ARG_POINTER_REGNUM \ + || (unsigned) reg_renumber[REGNO] <= STACK_POINTER_REGNUM) + +#define REGNO_OK_FOR_SIREG_P(REGNO) ((REGNO) == 4 || reg_renumber[REGNO] == 4) +#define REGNO_OK_FOR_DIREG_P(REGNO) ((REGNO) == 5 || reg_renumber[REGNO] == 5) + +/* The macros REG_OK_FOR..._P assume that the arg is a REG rtx + and check its validity for a certain class. + We have two alternate definitions for each of them. + The usual definition accepts all pseudo regs; the other rejects + them unless they have been allocated suitable hard regs. + The symbol REG_OK_STRICT causes the latter definition to be used. + + Most source files want to accept pseudo regs in the hope that + they will get allocated to the class that the insn wants them to be in. + Source files for reload pass need to be strict. + After reload, it makes no difference, since pseudo regs have + been eliminated by then. */ + + +/* Non strict versions, pseudos are ok */ +#define REG_OK_FOR_INDEX_NONSTRICT_P(X) \ + (REGNO (X) < STACK_POINTER_REGNUM \ + || REGNO (X) >= FIRST_PSEUDO_REGISTER) + +#define REG_OK_FOR_BASE_NONSTRICT_P(X) \ + (REGNO (X) <= STACK_POINTER_REGNUM \ + || REGNO (X) == ARG_POINTER_REGNUM \ + || REGNO (X) >= FIRST_PSEUDO_REGISTER) + +#define REG_OK_FOR_STRREG_NONSTRICT_P(X) \ + (REGNO (X) == 4 || REGNO (X) == 5 || REGNO (X) >= FIRST_PSEUDO_REGISTER) + +/* Strict versions, hard registers only */ +#define REG_OK_FOR_INDEX_STRICT_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X)) +#define REG_OK_FOR_BASE_STRICT_P(X) REGNO_OK_FOR_BASE_P (REGNO (X)) +#define REG_OK_FOR_STRREG_STRICT_P(X) \ + (REGNO_OK_FOR_DIREG_P (REGNO (X)) || REGNO_OK_FOR_SIREG_P (REGNO (X))) + +#ifndef REG_OK_STRICT +#define REG_OK_FOR_INDEX_P(X) REG_OK_FOR_INDEX_NONSTRICT_P(X) +#define REG_OK_FOR_BASE_P(X) REG_OK_FOR_BASE_NONSTRICT_P(X) +#define REG_OK_FOR_STRREG_P(X) REG_OK_FOR_STRREG_NONSTRICT_P(X) + +#else +#define REG_OK_FOR_INDEX_P(X) REG_OK_FOR_INDEX_STRICT_P(X) +#define REG_OK_FOR_BASE_P(X) REG_OK_FOR_BASE_STRICT_P(X) +#define REG_OK_FOR_STRREG_P(X) REG_OK_FOR_STRREG_STRICT_P(X) +#endif + +/* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression + that is a valid memory address for an instruction. + The MODE argument is the machine mode for the MEM expression + that wants to use this address. + + The other macros defined here are used only in GO_IF_LEGITIMATE_ADDRESS, + except for CONSTANT_ADDRESS_P which is usually machine-independent. + + See legitimize_pic_address in i386.c for details as to what + constitutes a legitimate address when -fpic is used. */ + +#define MAX_REGS_PER_ADDRESS 2 + +#define CONSTANT_ADDRESS_P(X) \ + (GET_CODE (X) == LABEL_REF || GET_CODE (X) == SYMBOL_REF \ + || GET_CODE (X) == CONST_INT || GET_CODE (X) == CONST \ + || GET_CODE (X) == HIGH) + +/* Nonzero if the constant value X is a legitimate general operand. + It is given that X satisfies CONSTANT_P or is a CONST_DOUBLE. */ + +#define LEGITIMATE_CONSTANT_P(X) 1 + +#ifdef REG_OK_STRICT +#define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \ +{ \ + if (legitimate_address_p (MODE, X, 1)) \ + goto ADDR; \ +} + +#else +#define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \ +{ \ + if (legitimate_address_p (MODE, X, 0)) \ + goto ADDR; \ +} + +#endif + +/* Try machine-dependent ways of modifying an illegitimate address + to be legitimate. If we find one, return the new, valid address. + This macro is used in only one place: `memory_address' in explow.c. + + OLDX is the address as it was before break_out_memory_refs was called. + In some cases it is useful to look at this to decide what needs to be done. + + MODE and WIN are passed so that this macro can use + GO_IF_LEGITIMATE_ADDRESS. + + It is always safe for this macro to do nothing. It exists to recognize + opportunities to optimize the output. + + For the 80386, we handle X+REG by loading X into a register R and + using R+REG. R will go in a general reg and indexing will be used. + However, if REG is a broken-out memory address or multiplication, + nothing needs to be done because REG can certainly go in a general reg. + + When -fpic is used, special handling is needed for symbolic references. + See comments by legitimize_pic_address in i386.c for details. */ + +#define LEGITIMIZE_ADDRESS(X, OLDX, MODE, WIN) \ +{ \ + rtx orig_x = (X); \ + (X) = legitimize_address (X, OLDX, MODE); \ + if (memory_address_p (MODE, X)) \ + goto WIN; \ +} + +/* Nonzero if the constant value X is a legitimate general operand + when generating PIC code. It is given that flag_pic is on and + that X satisfies CONSTANT_P or is a CONST_DOUBLE. */ + +#define LEGITIMATE_PIC_OPERAND_P(X) \ + (! SYMBOLIC_CONST (X) \ + || (GET_CODE (X) == SYMBOL_REF && CONSTANT_POOL_ADDRESS_P (X))) + +#define SYMBOLIC_CONST(X) \ +(GET_CODE (X) == SYMBOL_REF \ + || GET_CODE (X) == LABEL_REF \ + || (GET_CODE (X) == CONST && symbolic_reference_mentioned_p (X))) + +/* Go to LABEL if ADDR (a legitimate address expression) + has an effect that depends on the machine mode it is used for. + On the 80386, only postdecrement and postincrement address depend thus + (the amount of decrement or increment being the length of the operand). */ +#define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) \ + if (GET_CODE (ADDR) == POST_INC || GET_CODE (ADDR) == POST_DEC) goto LABEL + +/* Define this macro if references to a symbol must be treated + differently depending on something about the variable or + function named by the symbol (such as what section it is in). + + On i386, if using PIC, mark a SYMBOL_REF for a non-global symbol + so that we may access it directly in the GOT. */ + +#define ENCODE_SECTION_INFO(DECL) \ +do \ + { \ + if (flag_pic) \ + { \ + rtx rtl = (TREE_CODE_CLASS (TREE_CODE (DECL)) != 'd' \ + ? TREE_CST_RTL (DECL) : DECL_RTL (DECL)); \ + SYMBOL_REF_FLAG (XEXP (rtl, 0)) \ + = (TREE_CODE_CLASS (TREE_CODE (DECL)) != 'd' \ + || ! TREE_PUBLIC (DECL)); \ + } \ + } \ +while (0) + +/* Initialize data used by insn expanders. This is called from + init_emit, once for each function, before code is generated. + For 386, clear stack slot assignments remembered from previous + functions. */ + +#define INIT_EXPANDERS clear_386_stack_locals () + +/* The `FINALIZE_PIC' macro serves as a hook to emit these special + codes once the function is being compiled into assembly code, but + not before. (It is not done before, because in the case of + compiling an inline function, it would lead to multiple PIC + prologues being included in functions which used inline functions + and were compiled to assembly language.) */ + +#define FINALIZE_PIC \ +do \ + { \ + extern int current_function_uses_pic_offset_table; \ + \ + current_function_uses_pic_offset_table |= profile_flag | profile_block_flag; \ + } \ +while (0) + + +/* If defined, a C expression whose value is nonzero if IDENTIFIER + with arguments ARGS is a valid machine specific attribute for DECL. + The attributes in ATTRIBUTES have previously been assigned to DECL. */ + +#define VALID_MACHINE_DECL_ATTRIBUTE(DECL, ATTRIBUTES, NAME, ARGS) \ + (i386_valid_decl_attribute_p (DECL, ATTRIBUTES, NAME, ARGS)) + +/* If defined, a C expression whose value is nonzero if IDENTIFIER + with arguments ARGS is a valid machine specific attribute for TYPE. + The attributes in ATTRIBUTES have previously been assigned to TYPE. */ + +#define VALID_MACHINE_TYPE_ATTRIBUTE(TYPE, ATTRIBUTES, NAME, ARGS) \ + (i386_valid_type_attribute_p (TYPE, ATTRIBUTES, NAME, ARGS)) + +/* If defined, a C expression whose value is zero if the attributes on + TYPE1 and TYPE2 are incompatible, one if they are compatible, and + two if they are nearly compatible (which causes a warning to be + generated). */ + +#define COMP_TYPE_ATTRIBUTES(TYPE1, TYPE2) \ + (i386_comp_type_attributes (TYPE1, TYPE2)) + +/* If defined, a C statement that assigns default attributes to newly + defined TYPE. */ + +/* #define SET_DEFAULT_TYPE_ATTRIBUTES (TYPE) */ + +/* Max number of args passed in registers. If this is more than 3, we will + have problems with ebx (register #4), since it is a caller save register and + is also used as the pic register in ELF. So for now, don't allow more than + 3 registers to be passed in registers. */ + +#define REGPARM_MAX 3 + + +/* Specify the machine mode that this machine uses + for the index in the tablejump instruction. */ +#define CASE_VECTOR_MODE Pmode + +/* Define this if the tablejump instruction expects the table + to contain offsets from the address of the table. + Do not define this if the table should contain absolute addresses. */ +/* #define CASE_VECTOR_PC_RELATIVE */ + +/* Specify the tree operation to be used to convert reals to integers. + This should be changed to take advantage of fist --wfs ?? + */ +#define IMPLICIT_FIX_EXPR FIX_ROUND_EXPR + +/* This is the kind of divide that is easiest to do in the general case. */ +#define EASY_DIV_EXPR TRUNC_DIV_EXPR + +/* Define this as 1 if `char' should by default be signed; else as 0. */ +#define DEFAULT_SIGNED_CHAR 1 + +/* Max number of bytes we can move from memory to memory + in one reasonably fast instruction. */ +#define MOVE_MAX 4 + +/* MOVE_RATIO is the number of move instructions that is better than a + block move. Make this large on i386, since the block move is very + inefficient with small blocks, and the hard register needs of the + block move require much reload work. */ +#define MOVE_RATIO 5 + +/* Define this if zero-extension is slow (more than one real instruction). */ +/* #define SLOW_ZERO_EXTEND */ + +/* Nonzero if access to memory by bytes is slow and undesirable. */ +#define SLOW_BYTE_ACCESS 0 + +/* Define if shifts truncate the shift count + which implies one can omit a sign-extension or zero-extension + of a shift count. */ +/* One i386, shifts do truncate the count. But bit opcodes don't. */ + +/* #define SHIFT_COUNT_TRUNCATED */ + +/* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits + is done just by pretending it is already truncated. */ +#define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1 + +/* We assume that the store-condition-codes instructions store 0 for false + and some other value for true. This is the value stored for true. */ + +#define STORE_FLAG_VALUE 1 + +/* When a prototype says `char' or `short', really pass an `int'. + (The 386 can't easily push less than an int.) */ + +#define PROMOTE_PROTOTYPES + +/* Specify the machine mode that pointers have. + After generation of rtl, the compiler makes no further distinction + between pointers and any other objects of this machine mode. */ +#define Pmode SImode + +/* A function address in a call instruction + is a byte address (for indexing purposes) + so give the MEM rtx a byte's mode. */ +#define FUNCTION_MODE QImode + +/* Define this if addresses of constant functions + shouldn't be put through pseudo regs where they can be cse'd. + Desirable on the 386 because a CALL with a constant address is + not much slower than one with a register address. On a 486, + it is faster to call with a constant address than indirect. */ +#define NO_FUNCTION_CSE + +/* Provide the costs of a rtl expression. This is in the body of a + switch on CODE. */ + +#define RTX_COSTS(X,CODE,OUTER_CODE) \ + case MULT: \ + return COSTS_N_INSNS (20); \ + case DIV: \ + case UDIV: \ + case MOD: \ + case UMOD: \ + return COSTS_N_INSNS (20); \ + case ASHIFTRT: \ + case LSHIFTRT: \ + case ASHIFT: \ + return (4 + rtx_cost (XEXP (X, 0), OUTER_CODE) \ + + rtx_cost (XEXP (X, 1), OUTER_CODE)); \ + case PLUS: \ + if (GET_CODE (XEXP (X, 0)) == MULT \ + && GET_CODE (XEXP (XEXP (X, 0), 1)) == CONST_INT \ + && (INTVAL (XEXP (XEXP (X, 0), 1)) == 2 \ + || INTVAL (XEXP (XEXP (X, 0), 1)) == 4 \ + || INTVAL (XEXP (XEXP (X, 0), 1)) == 8)) \ + return (2 + rtx_cost (XEXP (XEXP (X, 0), 0), OUTER_CODE) \ + + rtx_cost (XEXP (X, 1), OUTER_CODE)); \ + break; + + +/* Compute the cost of computing a constant rtl expression RTX + whose rtx-code is CODE. The body of this macro is a portion + of a switch statement. If the code is computed here, + return it with a return statement. Otherwise, break from the switch. */ + +#define CONST_COSTS(RTX,CODE,OUTER_CODE) \ + case CONST_INT: \ + case CONST: \ + case LABEL_REF: \ + case SYMBOL_REF: \ + return flag_pic && SYMBOLIC_CONST (RTX) ? 2 : 0; \ + case CONST_DOUBLE: \ + { \ + int code; \ + if (GET_MODE (RTX) == VOIDmode) \ + return 2; \ + code = standard_80387_constant_p (RTX); \ + return code == 1 ? 0 : \ + code == 2 ? 1 : \ + 2; \ + } + +/* Compute the cost of an address. This is meant to approximate the size + and/or execution delay of an insn using that address. If the cost is + approximated by the RTL complexity, including CONST_COSTS above, as + is usually the case for CISC machines, this macro should not be defined. + For aggressively RISCy machines, only one insn format is allowed, so + this macro should be a constant. The value of this macro only matters + for valid addresses. + + For i386, it is better to use a complex address than let gcc copy + the address into a reg and make a new pseudo. But not if the address + requires to two regs - that would mean more pseudos with longer + lifetimes. */ + +#define ADDRESS_COST(RTX) \ + ((CONSTANT_P (RTX) \ + || (GET_CODE (RTX) == PLUS && CONSTANT_P (XEXP (RTX, 1)) \ + && REG_P (XEXP (RTX, 0)))) ? 0 \ + : REG_P (RTX) ? 1 \ + : 2) + +/* Add any extra modes needed to represent the condition code. + + For the i386, we need separate modes when floating-point equality + comparisons are being done. */ + +#define EXTRA_CC_MODES CCFPEQmode + +/* Define the names for the modes specified above. */ +#define EXTRA_CC_NAMES "CCFPEQ" + +/* Given a comparison code (EQ, NE, etc.) and the first operand of a COMPARE, + return the mode to be used for the comparison. + + For floating-point equality comparisons, CCFPEQmode should be used. + VOIDmode should be used in all other cases. */ + +#define SELECT_CC_MODE(OP,X,Y) \ + (GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT \ + && ((OP) == EQ || (OP) == NE) ? CCFPEQmode : VOIDmode) + +/* Define the information needed to generate branch and scc insns. This is + stored from the compare operation. Note that we can't use "rtx" here + since it hasn't been defined! */ + +extern struct rtx_def *(*i386_compare_gen)(), *(*i386_compare_gen_eq)(); + +/* Tell final.c how to eliminate redundant test instructions. */ + +/* Here we define machine-dependent flags and fields in cc_status + (see `conditions.h'). */ + +/* Set if the cc value is actually in the 80387, so a floating point + conditional branch must be output. */ +#define CC_IN_80387 04000 + +/* Set if the CC value was stored in a nonstandard way, so that + the state of equality is indicated by zero in the carry bit. */ +#define CC_Z_IN_NOT_C 010000 + +/* Store in cc_status the expressions + that the condition codes will describe + after execution of an instruction whose pattern is EXP. + Do not alter them if the instruction would not alter the cc's. */ + +#define NOTICE_UPDATE_CC(EXP, INSN) \ + notice_update_cc((EXP)) + +/* Output a signed jump insn. Use template NORMAL ordinarily, or + FLOAT following a floating point comparison. + Use NO_OV following an arithmetic insn that set the cc's + before a test insn that was deleted. + NO_OV may be zero, meaning final should reinsert the test insn + because the jump cannot be handled properly without it. */ + +#define OUTPUT_JUMP(NORMAL, FLOAT, NO_OV) \ +{ \ + if (cc_prev_status.flags & CC_IN_80387) \ + return FLOAT; \ + if (cc_prev_status.flags & CC_NO_OVERFLOW) \ + return NO_OV; \ + return NORMAL; \ +} + +/* Control the assembler format that we output, to the extent + this does not vary between assemblers. */ + +/* How to refer to registers in assembler output. + This sequence is indexed by compiler's hard-register-number (see above). */ + +/* In order to refer to the first 8 regs as 32 bit regs prefix an "e" + For non floating point regs, the following are the HImode names. + + For float regs, the stack top is sometimes referred to as "%st(0)" + instead of just "%st". PRINT_REG handles this with the "y" code. */ + +#define HI_REGISTER_NAMES \ +{"ax","dx","cx","bx","si","di","bp","sp", \ + "st","st(1)","st(2)","st(3)","st(4)","st(5)","st(6)","st(7)","" } + +#define REGISTER_NAMES HI_REGISTER_NAMES + +/* Table of additional register names to use in user input. */ + +#define ADDITIONAL_REGISTER_NAMES \ +{ "eax", 0, "edx", 1, "ecx", 2, "ebx", 3, \ + "esi", 4, "edi", 5, "ebp", 6, "esp", 7, \ + "al", 0, "dl", 1, "cl", 2, "bl", 3, \ + "ah", 0, "dh", 1, "ch", 2, "bh", 3 } + +/* Note we are omitting these since currently I don't know how +to get gcc to use these, since they want the same but different +number as al, and ax. +*/ + +/* note the last four are not really qi_registers, but + the md will have to never output movb into one of them + only a movw . There is no movb into the last four regs */ + +#define QI_REGISTER_NAMES \ +{"al", "dl", "cl", "bl", "si", "di", "bp", "sp",} + +/* These parallel the array above, and can be used to access bits 8:15 + of regs 0 through 3. */ + +#define QI_HIGH_REGISTER_NAMES \ +{"ah", "dh", "ch", "bh", } + +/* How to renumber registers for dbx and gdb. */ + +/* {0,2,1,3,6,7,4,5,12,13,14,15,16,17} */ +#define DBX_REGISTER_NUMBER(n) \ +((n) == 0 ? 0 : \ + (n) == 1 ? 2 : \ + (n) == 2 ? 1 : \ + (n) == 3 ? 3 : \ + (n) == 4 ? 6 : \ + (n) == 5 ? 7 : \ + (n) == 6 ? 4 : \ + (n) == 7 ? 5 : \ + (n) + 4) + +/* This is how to output the definition of a user-level label named NAME, + such as the label on a static function or variable NAME. */ + +#define ASM_OUTPUT_LABEL(FILE,NAME) \ + (assemble_name (FILE, NAME), fputs (":\n", FILE)) + +/* This is how to output an assembler line defining a `double' constant. */ + +#define ASM_OUTPUT_DOUBLE(FILE,VALUE) \ +do { long l[2]; \ + REAL_VALUE_TO_TARGET_DOUBLE (VALUE, l); \ + if (sizeof (int) == sizeof (long)) \ + fprintf (FILE, "%s 0x%x,0x%x\n", ASM_LONG, l[0], l[1]); \ + else \ + fprintf (FILE, "%s 0x%lx,0x%lx\n", ASM_LONG, l[0], l[1]); \ + } while (0) + +/* This is how to output a `long double' extended real constant. */ + +#undef ASM_OUTPUT_LONG_DOUBLE +#define ASM_OUTPUT_LONG_DOUBLE(FILE,VALUE) \ +do { long l[3]; \ + REAL_VALUE_TO_TARGET_LONG_DOUBLE (VALUE, l); \ + if (sizeof (int) == sizeof (long)) \ + fprintf (FILE, "%s 0x%x,0x%x,0x%x\n", ASM_LONG, l[0], l[1], l[2]); \ + else \ + fprintf (FILE, "%s 0x%lx,0x%lx,0x%lx\n", ASM_LONG, l[0], l[1], l[2]); \ + } while (0) + +/* This is how to output an assembler line defining a `float' constant. */ + +#define ASM_OUTPUT_FLOAT(FILE,VALUE) \ +do { long l; \ + REAL_VALUE_TO_TARGET_SINGLE (VALUE, l); \ + if (sizeof (int) == sizeof (long)) \ + fprintf ((FILE), "%s 0x%x\n", ASM_LONG, l); \ + else \ + fprintf ((FILE), "%s 0x%lx\n", ASM_LONG, l); \ + } while (0) + +/* Store in OUTPUT a string (made with alloca) containing + an assembler-name for a local static variable named NAME. + LABELNO is an integer which is different for each call. */ + +#define ASM_FORMAT_PRIVATE_NAME(OUTPUT, NAME, LABELNO) \ +( (OUTPUT) = (char *) alloca (strlen ((NAME)) + 10), \ + sprintf ((OUTPUT), "%s.%d", (NAME), (LABELNO))) + + + +/* This is how to output an assembler line defining an `int' constant. */ + +#define ASM_OUTPUT_INT(FILE,VALUE) \ +( fprintf (FILE, "%s ", ASM_LONG), \ + output_addr_const (FILE,(VALUE)), \ + putc('\n',FILE)) + +/* Likewise for `char' and `short' constants. */ +/* is this supposed to do align too?? */ + +#define ASM_OUTPUT_SHORT(FILE,VALUE) \ +( fprintf (FILE, "%s ", ASM_SHORT), \ + output_addr_const (FILE,(VALUE)), \ + putc('\n',FILE)) + +/* +#define ASM_OUTPUT_SHORT(FILE,VALUE) \ +( fprintf (FILE, "%s ", ASM_BYTE_OP), \ + output_addr_const (FILE,(VALUE)), \ + fputs (",", FILE), \ + output_addr_const (FILE,(VALUE)), \ + fputs (" >> 8\n",FILE)) +*/ + + +#define ASM_OUTPUT_CHAR(FILE,VALUE) \ +( fprintf (FILE, "%s ", ASM_BYTE_OP), \ + output_addr_const (FILE, (VALUE)), \ + putc ('\n', FILE)) + +/* This is how to output an assembler line for a numeric constant byte. */ + +#define ASM_OUTPUT_BYTE(FILE,VALUE) \ + fprintf ((FILE), "%s 0x%x\n", ASM_BYTE_OP, (VALUE)) + +/* This is how to output an insn to push a register on the stack. + It need not be very fast code. */ + +#define ASM_OUTPUT_REG_PUSH(FILE,REGNO) \ + fprintf (FILE, "\tpushl e%s\n", reg_names[REGNO]) + +/* This is how to output an insn to pop a register from the stack. + It need not be very fast code. */ + +#define ASM_OUTPUT_REG_POP(FILE,REGNO) \ + fprintf (FILE, "\tpopl e%s\n", reg_names[REGNO]) + +/* This is how to output an element of a case-vector that is absolute. + */ + +#define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \ + fprintf (FILE, "%s %s%d\n", ASM_LONG, LPREFIX, VALUE) + +/* This is how to output an element of a case-vector that is relative. + We don't use these on the 386 yet, because the ATT assembler can't do + forward reference the differences. + */ + +#define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, VALUE, REL) \ + fprintf (FILE, "\t.word %s%d-%s%d\n",LPREFIX, VALUE,LPREFIX, REL) + +/* Define the parentheses used to group arithmetic operations + in assembler code. */ + +#define ASM_OPEN_PAREN "" +#define ASM_CLOSE_PAREN "" + +/* Define results of standard character escape sequences. */ +#define TARGET_BELL 007 +#define TARGET_BS 010 +#define TARGET_TAB 011 +#define TARGET_NEWLINE 012 +#define TARGET_VT 013 +#define TARGET_FF 014 +#define TARGET_CR 015 + +/* Print operand X (an rtx) in assembler syntax to file FILE. + CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified. + The CODE z takes the size of operand from the following digit, and + outputs b,w,or l respectively. + + On the 80386, we use several such letters: + f -- float insn (print a CONST_DOUBLE as a float rather than in hex). + L,W,B,Q,S,T -- print the opcode suffix for specified size of operand. + R -- print the prefix for register names. + z -- print the opcode suffix for the size of the current operand. + * -- print a star (in certain assembler syntax) + w -- print the operand as if it's a "word" (HImode) even if it isn't. + b -- print the operand as if it's a byte (QImode) even if it isn't. + c -- don't print special prefixes before constant operands. */ + +#define PRINT_OPERAND_PUNCT_VALID_P(CODE) \ + ((CODE) == '*') + +/* Print the name of a register based on its machine mode and number. + If CODE is 'w', pretend the mode is HImode. + If CODE is 'b', pretend the mode is QImode. + If CODE is 'k', pretend the mode is SImode. + If CODE is 'h', pretend the reg is the `high' byte register. + If CODE is 'y', print "st(0)" instead of "st", if the reg is stack op. */ + +extern char *hi_reg_name[]; +extern char *qi_reg_name[]; +extern char *qi_high_reg_name[]; + +#define PRINT_REG(X, CODE, FILE) \ + do { if (REGNO (X) == ARG_POINTER_REGNUM) \ + abort (); \ + fprintf (FILE, "%s", RP); \ + switch ((CODE == 'w' ? 2 \ + : CODE == 'b' ? 1 \ + : CODE == 'k' ? 4 \ + : CODE == 'y' ? 3 \ + : CODE == 'h' ? 0 \ + : GET_MODE_SIZE (GET_MODE (X)))) \ + { \ + case 3: \ + if (STACK_TOP_P (X)) \ + { \ + fputs ("st(0)", FILE); \ + break; \ + } \ + case 4: \ + case 8: \ + case 12: \ + if (! FP_REG_P (X)) fputs ("e", FILE); \ + case 2: \ + fputs (hi_reg_name[REGNO (X)], FILE); \ + break; \ + case 1: \ + fputs (qi_reg_name[REGNO (X)], FILE); \ + break; \ + case 0: \ + fputs (qi_high_reg_name[REGNO (X)], FILE); \ + break; \ + } \ + } while (0) + +#define PRINT_OPERAND(FILE, X, CODE) \ + print_operand (FILE, X, CODE) + +#define PRINT_OPERAND_ADDRESS(FILE, ADDR) \ + print_operand_address (FILE, ADDR) + +/* Print the name of a register for based on its machine mode and number. + This macro is used to print debugging output. + This macro is different from PRINT_REG in that it may be used in + programs that are not linked with aux-output.o. */ + +#define DEBUG_PRINT_REG(X, CODE, FILE) \ + do { static char *hi_name[] = HI_REGISTER_NAMES; \ + static char *qi_name[] = QI_REGISTER_NAMES; \ + fprintf (FILE, "%d %s", REGNO (X), RP); \ + if (REGNO (X) == ARG_POINTER_REGNUM) \ + { fputs ("argp", FILE); break; } \ + if (STACK_TOP_P (X)) \ + { fputs ("st(0)", FILE); break; } \ + if (FP_REG_P (X)) \ + { fputs (hi_name[REGNO(X)], FILE); break; } \ + switch (GET_MODE_SIZE (GET_MODE (X))) \ + { \ + default: \ + fputs ("e", FILE); \ + case 2: \ + fputs (hi_name[REGNO (X)], FILE); \ + break; \ + case 1: \ + fputs (qi_name[REGNO (X)], FILE); \ + break; \ + } \ + } while (0) + +/* Output the prefix for an immediate operand, or for an offset operand. */ +#define PRINT_IMMED_PREFIX(FILE) fputs (IP, (FILE)) +#define PRINT_OFFSET_PREFIX(FILE) fputs (IP, (FILE)) + +/* Routines in libgcc that return floats must return them in an fp reg, + just as other functions do which return such values. + These macros make that happen. */ + +#define FLOAT_VALUE_TYPE float +#define INTIFY(FLOATVAL) FLOATVAL + +/* Nonzero if INSN magically clobbers register REGNO. */ + +/* #define INSN_CLOBBERS_REGNO_P(INSN, REGNO) \ + (FP_REGNO_P (REGNO) \ + && (GET_CODE (INSN) == JUMP_INSN || GET_CODE (INSN) == BARRIER)) +*/ + +/* a letter which is not needed by the normal asm syntax, which + we can use for operand syntax in the extended asm */ + +#define ASM_OPERAND_LETTER '#' + +#define RET return "" +#define AT_SP(mode) (gen_rtx (MEM, (mode), stack_pointer_rtx)) + +/* Functions in i386.c */ +extern void override_options (); +extern void order_regs_for_local_alloc (); +extern int i386_valid_decl_attribute_p (); +extern int i386_valid_type_attribute_p (); +extern int i386_return_pops_args (); +extern int i386_comp_type_attributes (); +extern void init_cumulative_args (); +extern void function_arg_advance (); +extern struct rtx_def *function_arg (); +extern int function_arg_partial_nregs (); +extern void output_op_from_reg (); +extern void output_to_reg (); +extern char *singlemove_string (); +extern char *output_move_double (); +extern char *output_move_memory (); +extern char *output_move_pushmem (); +extern int standard_80387_constant_p (); +extern char *output_move_const_single (); +extern int symbolic_operand (); +extern int call_insn_operand (); +extern int expander_call_insn_operand (); +extern int symbolic_reference_mentioned_p (); +extern void emit_pic_move (); +extern void function_prologue (); +extern int simple_386_epilogue (); +extern void function_epilogue (); +extern int legitimate_address_p (); +extern struct rtx_def *legitimize_pic_address (); +extern struct rtx_def *legitimize_address (); +extern void print_operand (); +extern void print_operand_address (); +extern void notice_update_cc (); +extern void split_di (); +extern int binary_387_op (); +extern int shift_op (); +extern int VOIDmode_compare_op (); +extern char *output_387_binary_op (); +extern char *output_fix_trunc (); +extern char *output_float_compare (); +extern char *output_fp_cc0_set (); +extern void save_386_machine_status (); +extern void restore_386_machine_status (); +extern void clear_386_stack_locals (); +extern struct rtx_def *assign_386_stack_local (); + +/* Variables in i386.c */ +extern char *i386_reg_alloc_order; /* register allocation order */ +extern char *i386_regparm_string; /* # registers to use to pass args */ +extern char *i386_align_loops_string; /* power of two alignment for loops */ +extern char *i386_align_jumps_string; /* power of two alignment for non-loop jumps */ +extern char *i386_align_funcs_string; /* power of two alignment for functions */ +extern int i386_regparm; /* i386_regparm_string as a number */ +extern int i386_align_loops; /* power of two alignment for loops */ +extern int i386_align_jumps; /* power of two alignment for non-loop jumps */ +extern int i386_align_funcs; /* power of two alignment for functions */ +extern char *hi_reg_name[]; /* names for 16 bit regs */ +extern char *qi_reg_name[]; /* names for 8 bit regs (low) */ +extern char *qi_high_reg_name[]; /* names for 8 bit regs (high) */ +extern enum reg_class regclass_map[]; /* smalled class containing REGNO */ +extern struct rtx_def *i386_compare_op0; /* operand 0 for comparisons */ +extern struct rtx_def *i386_compare_op1; /* operand 1 for comparisons */ + +/* External variables used */ +extern int optimize; /* optimization level */ +extern int obey_regdecls; /* TRUE if stupid register allocation */ + +/* External functions used */ +extern struct rtx_def *force_operand (); + +/* +Local variables: +version-control: t +End: +*/ |