diff options
Diffstat (limited to 'contrib/binutils/ld/scripttempl')
| -rw-r--r-- | contrib/binutils/ld/scripttempl/elf.sc | 52 | ||||
| -rw-r--r-- | contrib/binutils/ld/scripttempl/elf32cr16.sc | 175 | ||||
| -rw-r--r-- | contrib/binutils/ld/scripttempl/mep.sc | 446 | ||||
| -rw-r--r-- | contrib/binutils/ld/scripttempl/pep.sc | 272 |
4 files changed, 927 insertions, 18 deletions
diff --git a/contrib/binutils/ld/scripttempl/elf.sc b/contrib/binutils/ld/scripttempl/elf.sc index ac0c725..205d162 100644 --- a/contrib/binutils/ld/scripttempl/elf.sc +++ b/contrib/binutils/ld/scripttempl/elf.sc @@ -14,6 +14,8 @@ # (e.g., .PARISC.global) # OTHER_RELRO_SECTIONS - other than .data.rel.ro ... # (e.g. PPC32 .fixup, .got[12]) +# OTHER_BSS_SECTIONS - other than .bss .sbss ... +# ATTRS_SECTIONS - at the end # OTHER_SECTIONS - at the end # EXECUTABLE_SYMBOLS - symbols that must be defined for an # executable (e.g., _DYNAMIC_LINK) @@ -52,6 +54,7 @@ # so that .got can be in the RELRO area. It should be set to # the number of bytes in the beginning of .got.plt which can be # in the RELRO area as well. +# USER_LABEL_PREFIX - prefix to add to user-visible symbols. # # When adding sections, do note that the names of some sections are used # when specifying the start address of the next. @@ -94,6 +97,7 @@ test -z "${ETEXT_NAME}" && ETEXT_NAME=etext test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE="" test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE="" test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT +test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }" DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))" DATA_SEGMENT_RELRO_END="" DATA_SEGMENT_END="" @@ -102,7 +106,9 @@ if test -n "${COMMONPAGESIZE}"; then DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);" DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);" fi -INTERP=".interp ${RELOCATING-0} : { *(.interp) }" +if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then + INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp) }" +fi if test -z "$PLT"; then PLT=".plt ${RELOCATING-0} : { *(.plt) }" fi @@ -173,13 +179,15 @@ test "${LARGE_SECTIONS}" = "yes" && REL_LARGE=" .rela.lbss ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) } .rel.lrodata ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) } .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }" -test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS=" +test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS=" + ${OTHER_BSS_SECTIONS} .lbss ${RELOCATING-0} : { *(.dynlbss) *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*}) *(LARGE_COMMON) - } + }" +test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS=" .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} : { *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*}) @@ -202,14 +210,15 @@ CTOR=".ctors ${CONSTRUCTING-0} : doesn't matter which directory crtbegin.o is in. */ - KEEP (*crtbegin*.o(.ctors)) + KEEP (*crtbegin.o(.ctors)) + KEEP (*crtbegin?.o(.ctors)) /* We don't want to include the .ctor section from the crtend.o file until after the sorted ctors. The .ctor section from the crtend file contains the end of ctors marker and it must be last */ - KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors)) KEEP (*(SORT(.ctors.*))) KEEP (*(.ctors)) ${CONSTRUCTING+${CTOR_END}} @@ -217,8 +226,9 @@ CTOR=".ctors ${CONSTRUCTING-0} : DTOR=".dtors ${CONSTRUCTING-0} : { ${CONSTRUCTING+${DTOR_START}} - KEEP (*crtbegin*.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors)) + KEEP (*crtbegin.o(.dtors)) + KEEP (*crtbegin?.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors)) KEEP (*(SORT(.dtors.*))) KEEP (*(.dtors)) ${CONSTRUCTING+${DTOR_END}} @@ -256,10 +266,10 @@ SECTIONS ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}} ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}} ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}} - ${CREATE_SHLIB-${INTERP}} ${INITIAL_READONLY_SECTIONS} ${TEXT_DYNAMIC+${DYNAMIC}} .hash ${RELOCATING-0} : { *(.hash) } + .gnu.hash ${RELOCATING-0} : { *(.gnu.hash) } .dynsym ${RELOCATING-0} : { *(.dynsym) } .dynstr ${RELOCATING-0} : { *(.dynstr) } .gnu.version ${RELOCATING-0} : { *(.gnu.version) } @@ -378,23 +388,23 @@ cat <<EOF .preinit_array ${RELOCATING-0} : { - ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_start = .);}} + ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}} KEEP (*(.preinit_array)) - ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_end = .);}} + ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}} } .init_array ${RELOCATING-0} : { - ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_start = .);}} + ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}} KEEP (*(SORT(.init_array.*))) KEEP (*(.init_array)) - ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_end = .);}} + ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}} } .fini_array ${RELOCATING-0} : { - ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_start = .);}} + ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}} KEEP (*(.fini_array)) KEEP (*(SORT(.fini_array.*))) - ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_end = .);}} + ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}} } ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}} ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}} @@ -416,7 +426,7 @@ cat <<EOF { ${RELOCATING+${DATA_START_SYMBOLS}} *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*}) - KEEP (*(.gnu.linkonce.d.*personality*)) + ${RELOCATING+KEEP (*(.gnu.linkonce.d.*personality*))} ${CONSTRUCTING+SORT(CONSTRUCTORS)} } .data1 ${RELOCATING-0} : { *(.data1) } @@ -430,7 +440,7 @@ cat <<EOF ${SDATA_GOT+${OTHER_GOT_SECTIONS}} ${SDATA} ${OTHER_SDATA_SECTIONS} - ${RELOCATING+${DATA_END_SYMBOLS-_edata = .; PROVIDE (edata = .);}} + ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}} ${RELOCATING+__bss_start = .;} ${RELOCATING+${OTHER_BSS_SYMBOLS}} ${SBSS} @@ -447,12 +457,13 @@ cat <<EOF pad the .data section. */ ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);} } + ${OTHER_BSS_SECTIONS} ${RELOCATING+${OTHER_BSS_END_SYMBOLS}} ${RELOCATING+. = ALIGN(${ALIGNMENT});} ${LARGE_SECTIONS} ${RELOCATING+. = ALIGN(${ALIGNMENT});} ${RELOCATING+${OTHER_END_SYMBOLS}} - ${RELOCATING+${END_SYMBOLS-_end = .; PROVIDE (end = .);}} + ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}} ${RELOCATING+${DATA_SEGMENT_END}} /* Stabs debugging sections. */ @@ -482,7 +493,7 @@ cat <<EOF .debug_pubnames 0 : { *(.debug_pubnames) } /* DWARF 2 */ - .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_info 0 : { *(.debug_info${RELOCATING+ .gnu.linkonce.wi.*}) } .debug_abbrev 0 : { *(.debug_abbrev) } .debug_line 0 : { *(.debug_line) } .debug_frame 0 : { *(.debug_frame) } @@ -496,10 +507,15 @@ cat <<EOF .debug_typenames 0 : { *(.debug_typenames) } .debug_varnames 0 : { *(.debug_varnames) } + /* DWARF 3 */ + .debug_pubtypes 0 : { *(.debug_pubtypes) } + .debug_ranges 0 : { *(.debug_ranges) } + ${TINY_DATA_SECTION} ${TINY_BSS_SECTION} ${STACK_ADDR+${STACK}} + ${ATTRS_SECTIONS} ${OTHER_SECTIONS} ${RELOCATING+${OTHER_SYMBOLS}} ${RELOCATING+${STACKNOTE}} diff --git a/contrib/binutils/ld/scripttempl/elf32cr16.sc b/contrib/binutils/ld/scripttempl/elf32cr16.sc new file mode 100644 index 0000000..2e62fa2 --- /dev/null +++ b/contrib/binutils/ld/scripttempl/elf32cr16.sc @@ -0,0 +1,175 @@ +# Linker Script for National Semiconductor's CR16-ELF32. + +# The next line should be uncommented if it is desired to link +# without libstart.o and directly enter main. + +# ENTRY=_main + +test -z "$ENTRY" && ENTRY=_start +cat <<EOF + +/* Example Linker Script for linking NS CR16 elf32 files. */ + +/* The next line forces the entry point (${ENTRY} in this script) + to be entered in the output file as an undefined symbol. + It is needed in case the entry point is not called explicitly + (which is the usual case) AND is in an archive. */ + +OUTPUT_FORMAT("${OUTPUT_FORMAT}") +OUTPUT_ARCH(${ARCH}) +EXTERN(${ENTRY}) +ENTRY(${ENTRY}) + +/* Define memory regions. */ +MEMORY +{ + rom : ORIGIN = 0x2, LENGTH = 3M + ram : ORIGIN = 4M, LENGTH = 10M +} + +/* Many sections come in three flavours. There is the 'real' section, + like ".data". Then there are the per-procedure or per-variable + sections, generated by -ffunction-sections and -fdata-sections in GCC, + and useful for --gc-sections, which for a variable "foo" might be + ".data.foo". Then there are the linkonce sections, for which the linker + eliminates duplicates, which are named like ".gnu.linkonce.d.foo". + The exact correspondences are: + + Section Linkonce section + .text .gnu.linkonce.t.foo + .rdata .gnu.linkonce.r.foo + .data .gnu.linkonce.d.foo + .bss .gnu.linkonce.b.foo + .debug_info .gnu.linkonce.wi.foo */ + +SECTIONS +{ + .init : + { + __INIT_START = .; + KEEP (*(.init)) + __INIT_END = .; + } > rom + + .fini : + { + __FINI_START = .; + KEEP (*(.fini)) + __FINI_END = .; + } > rom + + .jcr : + { + KEEP (*(.jcr)) + } > rom + + .text : + { + __TEXT_START = .; + *(.text) *(.text.*) *(.gnu.linkonce.t.*) + __TEXT_END = .; + } > rom + + .rdata : + { + __RDATA_START = .; + *(.rdata_4) *(.rdata_2) *(.rdata_1) *(.rdata.*) *(.gnu.linkonce.r.*) *(.rodata*) + __RDATA_END = .; + } > rom + + .ctor ALIGN(4) : + { + __CTOR_START = .; + /* The compiler uses crtbegin.o to find the start + of the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + + KEEP (*crtbegin*.o(.ctors)) + + /* We don't want to include the .ctor section from + the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + + KEEP (*(EXCLUDE_FILE (*crtend*.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + __CTOR_END = .; + } > rom + + .dtor ALIGN(4) : + { + __DTOR_START = .; + KEEP (*crtbegin*.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend*.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + __DTOR_END = .; + } > rom + + .data : + { + __DATA_START = .; + *(.data_4) *(.data_2) *(.data_1) *(.data) *(.data.*) *(.gnu.linkonce.d.*) + __DATA_END = .; + } > ram AT > rom + + .bss (NOLOAD) : + { + __BSS_START = .; + *(.bss_4) *(.bss_2) *(.bss_1) *(.bss) *(COMMON) *(.bss.*) *(.gnu.linkonce.b.*) + __BSS_END = .; + } > ram + +/* You may change the sizes of the following sections to fit the actual + size your program requires. + + The heap and stack are aligned to the bus width, as a speed optimization + for accessing data located there. */ + + .heap : + { + . = ALIGN(4); + __HEAP_START = .; + . += 0x2000; __HEAP_MAX = .; + } > ram + + .stack : + { + . = ALIGN(4); + . += 0x6000; + __STACK_START = .; + } > ram + + .istack : + { + . = ALIGN(4); + . += 0x100; + __ISTACK_START = .; + } > ram + + .comment 0 : { *(.comment) } + + /* DWARF debug sections. + Symbols in the DWARF debugging sections are relative to the beginning + of the section so we begin them at 0. */ + + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } +} + +__DATA_IMAGE_START = LOADADDR(.data); +EOF diff --git a/contrib/binutils/ld/scripttempl/mep.sc b/contrib/binutils/ld/scripttempl/mep.sc new file mode 100644 index 0000000..0d459c6 --- /dev/null +++ b/contrib/binutils/ld/scripttempl/mep.sc @@ -0,0 +1,446 @@ +# +# Unusual variables checked by this code: +# NOP - four byte opcode for no-op (defaults to 0) +# NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not +# empty. +# SMALL_DATA_CTOR - .ctors contains small data. +# SMALL_DATA_DTOR - .dtors contains small data. +# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start +# INITIAL_READONLY_SECTIONS - at start of text segment +# OTHER_READONLY_SECTIONS - other than .text .init .rodata ... +# (e.g., .PARISC.milli) +# OTHER_TEXT_SECTIONS - these get put in .text when relocating +# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ... +# (e.g., .PARISC.global) +# OTHER_RELRO_SECTIONS - other than .data.rel.ro ... +# (e.g. PPC32 .fixup, .got[12]) +# OTHER_BSS_SECTIONS - other than .bss .sbss ... +# OTHER_SECTIONS - at the end +# EXECUTABLE_SYMBOLS - symbols that must be defined for an +# executable (e.g., _DYNAMIC_LINK) +# TEXT_START_ADDR - the first byte of the text segment, after any +# headers. +# TEXT_BASE_ADDRESS - the first byte of the text segment. +# TEXT_START_SYMBOLS - symbols that appear at the start of the +# .text section. +# DATA_START_SYMBOLS - symbols that appear at the start of the +# .data section. +# OTHER_GOT_SYMBOLS - symbols defined just before .got. +# OTHER_GOT_SECTIONS - sections just after .got. +# OTHER_SDATA_SECTIONS - sections just after .sdata. +# OTHER_BSS_SYMBOLS - symbols that appear at the start of the +# .bss section besides __bss_start. +# DATA_PLT - .plt should be in data segment, not text segment. +# PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement. +# BSS_PLT - .plt should be in bss segment +# TEXT_DYNAMIC - .dynamic in text segment, not data segment. +# EMBEDDED - whether this is for an embedded system. +# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set +# start address of shared library. +# INPUT_FILES - INPUT command of files to always include +# WRITABLE_RODATA - if set, the .rodata section should be writable +# INIT_START, INIT_END - statements just before and just after +# combination of .init sections. +# FINI_START, FINI_END - statements just before and just after +# combination of .fini sections. +# STACK_ADDR - start of a .stack section. +# OTHER_END_SYMBOLS - symbols to place right at the end of the script. +# SEPARATE_GOTPLT - if set, .got.plt should be separate output section, +# so that .got can be in the RELRO area. It should be set to +# the number of bytes in the beginning of .got.plt which can be +# in the RELRO area as well. +# +# When adding sections, do note that the names of some sections are used +# when specifying the start address of the next. +# + +# Many sections come in three flavours. There is the 'real' section, +# like ".data". Then there are the per-procedure or per-variable +# sections, generated by -ffunction-sections and -fdata-sections in GCC, +# and useful for --gc-sections, which for a variable "foo" might be +# ".data.foo". Then there are the linkonce sections, for which the linker +# eliminates duplicates, which are named like ".gnu.linkonce.d.foo". +# The exact correspondences are: +# +# Section Linkonce section +# .text .gnu.linkonce.t.foo +# .rodata .gnu.linkonce.r.foo +# .data .gnu.linkonce.d.foo +# .bss .gnu.linkonce.b.foo +# .sdata .gnu.linkonce.s.foo +# .sbss .gnu.linkonce.sb.foo +# .sdata2 .gnu.linkonce.s2.foo +# .sbss2 .gnu.linkonce.sb2.foo +# .debug_info .gnu.linkonce.wi.foo +# .tdata .gnu.linkonce.td.foo +# .tbss .gnu.linkonce.tb.foo +# +# Each of these can also have corresponding .rel.* and .rela.* sections. + +test -z "$ENTRY" && ENTRY=_start +test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT} +test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT} +if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi +test -z "${ELFSIZE}" && ELFSIZE=32 +test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8" +test "$LD_FLAG" = "N" && DATA_ADDR=. +test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE="" +test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE="" +test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT +DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))" +DATA_SEGMENT_RELRO_END="" +DATA_SEGMENT_RELRO_GOTPLT_END="" +DATA_SEGMENT_END="" +if test -n "${COMMONPAGESIZE}"; then + DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})" + DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);" + if test -n "${SEPARATE_GOTPLT}"; then + DATA_SEGMENT_RELRO_GOTPLT_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT}, .);" + else + DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (0, .);" + fi +fi +INTERP=".interp ${RELOCATING-0} : { *(.interp) }" +PLT=".plt ${RELOCATING-0} : { *(.plt) }" +if test -z "$GOT"; then + if test -z "$SEPARATE_GOTPLT"; then + GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) }" + else + GOT=".got ${RELOCATING-0} : { *(.got) }" + GOTPLT="${RELOCATING+${DATA_SEGMENT_RELRO_GOTPLT_END}} + .got.plt ${RELOCATING-0} : { *(.got.plt) }" + fi +fi +DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }" +RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }" +DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro*) }" +STACKNOTE="/DISCARD/ : { *(.note.GNU-stack) }" +if test -z "${NO_SMALL_DATA}"; then + SBSS=".sbss ${RELOCATING-0} : + { + ${RELOCATING+PROVIDE (__sbss_start = .);} + ${RELOCATING+PROVIDE (___sbss_start = .);} + ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)} + *(.dynsbss) + *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*}) + *(.scommon) + ${RELOCATING+PROVIDE (__sbss_end = .);} + ${RELOCATING+PROVIDE (___sbss_end = .);} + }" + SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }" + SDATA="/* We want the small data sections together, so single-instruction offsets + can access them all, and initialized data all before uninitialized, so + we can shorten the on-disk segment size. */ + .sdata ${RELOCATING-0} : + { + ${RELOCATING+${SDATA_START_SYMBOLS}} + ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)} + *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*}) + }" + SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }" + REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) } + .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }" + REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) } + .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }" + REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) } + .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }" + REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) } + .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }" +else + NO_SMALL_DATA=" " +fi +test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" " +CTOR=".ctors ${CONSTRUCTING-0} : + { + ${CONSTRUCTING+${CTOR_START}} + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + + KEEP (*crtbegin*.o(.ctors)) + + /* We don't want to include the .ctor section from + from the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + + KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + ${CONSTRUCTING+${CTOR_END}} + }" +DTOR=".dtors ${CONSTRUCTING-0} : + { + ${CONSTRUCTING+${DTOR_START}} + KEEP (*crtbegin*.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + ${CONSTRUCTING+${DTOR_END}} + }" +STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} : + { + ${RELOCATING+_stack = .;} + *(.stack) + }" + +# if this is for an embedded system, don't add SIZEOF_HEADERS. +if [ -z "$EMBEDDED" ]; then + test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS" +else + test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}" +fi + +cat <<EOF +OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}", + "${LITTLE_OUTPUT_FORMAT}") +OUTPUT_ARCH(${OUTPUT_ARCH}) +ENTRY(${ENTRY}) + +${RELOCATING+${LIB_SEARCH_DIRS}} +${RELOCATING+/* Do we need any of these for elf? + __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */} +${RELOCATING+${EXECUTABLE_SYMBOLS}} +${RELOCATING+${INPUT_FILES}} +${RELOCATING- /* For some reason, the Solaris linker makes bad executables + if gld -r is used and the intermediate file has sections starting + at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld + bug. But for now assigning the zero vmas works. */} + +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}} + ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}} + ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}} + ${CREATE_SHLIB-${INTERP}} + ${INITIAL_READONLY_SECTIONS} + ${TEXT_DYNAMIC+${DYNAMIC}} + .hash ${RELOCATING-0} : { *(.hash) } + .dynsym ${RELOCATING-0} : { *(.dynsym) } + .dynstr ${RELOCATING-0} : { *(.dynstr) } + .gnu.version ${RELOCATING-0} : { *(.gnu.version) } + .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) } + .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) } + +EOF +if [ "x$COMBRELOC" = x ]; then + COMBRELOCCAT=cat +else + COMBRELOCCAT="cat > $COMBRELOC" +fi +eval $COMBRELOCCAT <<EOF + .rel.init ${RELOCATING-0} : { *(.rel.init) } + .rela.init ${RELOCATING-0} : { *(.rela.init) } + .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) } + .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) } + .rel.fini ${RELOCATING-0} : { *(.rel.fini) } + .rela.fini ${RELOCATING-0} : { *(.rela.fini) } + .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) } + .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) } + ${OTHER_READONLY_RELOC_SECTIONS} + .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) } + .rela.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) } + .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) } + .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) } + .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) } + .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) } + .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) } + .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) } + .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) } + .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) } + .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) } + .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) } + .rel.got ${RELOCATING-0} : { *(.rel.got) } + .rela.got ${RELOCATING-0} : { *(.rela.got) } + ${OTHER_GOT_RELOC_SECTIONS} + ${REL_SDATA} + ${REL_SBSS} + ${REL_SDATA2} + ${REL_SBSS2} + .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) } + .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) } +EOF +if [ -n "$COMBRELOC" ]; then +cat <<EOF + .rel.dyn ${RELOCATING-0} : + { +EOF +sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC +cat <<EOF + } + .rela.dyn ${RELOCATING-0} : + { +EOF +sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC +cat <<EOF + } +EOF +fi +cat <<EOF + .rel.plt ${RELOCATING-0} : { *(.rel.plt) } + .rela.plt ${RELOCATING-0} : { *(.rela.plt) } + ${OTHER_PLT_RELOC_SECTIONS} + + .init ${RELOCATING-0} : + { + ${RELOCATING+${INIT_START}} + KEEP (*(.init)) + ${RELOCATING+${INIT_END}} + } =${NOP-0} + + ${DATA_PLT-${BSS_PLT-${PLT}}} + .text ${RELOCATING-0} : + { + ${RELOCATING+${TEXT_START_SYMBOLS}} + *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*}) + KEEP (*(.text.*personality*)) + /* .gnu.warning sections are handled specially by elf32.em. */ + *(.gnu.warning) + ${RELOCATING+${OTHER_TEXT_SECTIONS}} + } =${NOP-0} + .fini ${RELOCATING-0} : + { + ${RELOCATING+${FINI_START}} + KEEP (*(.fini)) + ${RELOCATING+${FINI_END}} + } =${NOP-0} + ${RELOCATING+PROVIDE (__etext = .);} + ${RELOCATING+PROVIDE (_etext = .);} + ${RELOCATING+PROVIDE (etext = .);} + ${WRITABLE_RODATA-${RODATA}} + .rodata1 ${RELOCATING-0} : { *(.rodata1) } + ${CREATE_SHLIB-${SDATA2}} + ${CREATE_SHLIB-${SBSS2}} + ${OTHER_READONLY_SECTIONS} + .eh_frame_hdr : { *(.eh_frame_hdr) } + .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) } + .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) } + + /* Adjust the address for the data segment. We want to adjust up to + the same address within the page on the next page up. */ + ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}} + ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} + ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} + + /* Exception handling */ + .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) } + .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) } + + /* Thread Local Storage sections */ + .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) } + .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} } + + .preinit_array ${RELOCATING-0} : { KEEP (*(.preinit_array)) } + .init_array ${RELOCATING-0} : { KEEP (*(.init_array)) } + .fini_array ${RELOCATING-0} : { KEEP (*(.fini_array)) } + + ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}} + ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}} + .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) } + + ${RELOCATING+${DATARELRO}} + ${OTHER_RELRO_SECTIONS} + ${TEXT_DYNAMIC-${DYNAMIC}} + ${NO_SMALL_DATA+${RELRO_NOW+${GOT}}} + ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}} + ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT+${GOTPLT}}}} + ${RELOCATING+${DATA_SEGMENT_RELRO_END}} + ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}} + + ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}} + + .data ${RELOCATING-0} : + { + ${RELOCATING+${DATA_START_SYMBOLS}} + *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*}) + KEEP (*(.gnu.linkonce.d.*personality*)) + ${CONSTRUCTING+SORT(CONSTRUCTORS)} + } + .data1 ${RELOCATING-0} : { *(.data1) } + ${WRITABLE_RODATA+${RODATA}} + ${OTHER_READWRITE_SECTIONS} + ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}} + ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}} + ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}} + ${RELOCATING+${OTHER_GOT_SYMBOLS}} + ${NO_SMALL_DATA-${GOT}} + ${OTHER_GOT_SECTIONS} + ${SDATA} + ${OTHER_SDATA_SECTIONS} + ${RELOCATING+_edata = .;} + ${RELOCATING+PROVIDE (edata = .);} + ${RELOCATING+__bss_start = .;} + ${RELOCATING+${OTHER_BSS_SYMBOLS}} + ${SBSS} + ${BSS_PLT+${PLT}} + .bss ${RELOCATING-0} : + { + *(.dynbss) + *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*}) + *(COMMON) + /* Align here to ensure that the .bss section occupies space up to + _end. Align after .bss to ensure correct alignment even if the + .bss section disappears because there are no input sections. */ + ${RELOCATING+. = ALIGN(${ALIGNMENT});} + } + ${OTHER_BSS_SECTIONS} + ${RELOCATING+. = ALIGN(${ALIGNMENT});} + ${RELOCATING+_end = .;} + ${RELOCATING+${OTHER_BSS_END_SYMBOLS}} + ${RELOCATING+PROVIDE (end = .);} + ${RELOCATING+${DATA_SEGMENT_END}} + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + + .comment 0 : { *(.comment) } + + /* DWARF debug sections. + Symbols in the DWARF debugging sections are relative to the beginning + of the section so we begin them at 0. */ + + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } + + ${STACK_ADDR+${STACK}} + ${OTHER_SECTIONS} + ${RELOCATING+${OTHER_END_SYMBOLS}} + ${RELOCATING+${STACKNOTE}} +} +EOF diff --git a/contrib/binutils/ld/scripttempl/pep.sc b/contrib/binutils/ld/scripttempl/pep.sc new file mode 100644 index 0000000..edad5ee --- /dev/null +++ b/contrib/binutils/ld/scripttempl/pep.sc @@ -0,0 +1,272 @@ +# Linker script for PE. + +if test -z "${RELOCATEABLE_OUTPUT_FORMAT}"; then + RELOCATEABLE_OUTPUT_FORMAT=${OUTPUT_FORMAT} +fi + +# We can't easily and portably get an unquoted $ in a shell +# substitution, so we do this instead. +# Sorting of the .foo$* sections is required by the definition of +# grouped sections in PE. +# Sorting of the file names in R_IDATA is required by the +# current implementation of dlltool (this could probably be changed to +# use grouped sections instead). +if test "${RELOCATING}"; then + R_TEXT='*(SORT(.text$*))' + R_DATA='*(SORT(.data$*))' + R_RDATA='*(SORT(.rdata$*))' + R_IDATA=' + SORT(*)(.idata$2) + SORT(*)(.idata$3) + /* These zeroes mark the end of the import list. */ + LONG (0); LONG (0); LONG (0); LONG (0); LONG (0); + SORT(*)(.idata$4) + SORT(*)(.idata$5) + SORT(*)(.idata$6) + SORT(*)(.idata$7)' + R_CRT_XC='*(SORT(.CRT$XC*)) /* C initialization */' + R_CRT_XI='*(SORT(.CRT$XI*)) /* C++ initialization */' + R_CRT_XL='*(SORT(.CRT$XL*)) /* TLS callbacks */' + R_CRT_XP='*(SORT(.CRT$XP*)) /* Pre-termination */' + R_CRT_XT='*(SORT(.CRT$XT*)) /* Termination */' + R_TLS=' + *(.tls) + *(.tls$) + *(SORT(.tls$*))' + R_RSRC='*(SORT(.rsrc$*))' +else + R_TEXT= + R_DATA= + R_RDATA= + R_IDATA= + R_CRT= + R_RSRC= +fi + +cat <<EOF +${RELOCATING+OUTPUT_FORMAT(${OUTPUT_FORMAT})} +${RELOCATING-OUTPUT_FORMAT(${RELOCATEABLE_OUTPUT_FORMAT})} +${OUTPUT_ARCH+OUTPUT_ARCH(${OUTPUT_ARCH})} + +${LIB_SEARCH_DIRS} + +SECTIONS +{ + ${RELOCATING+/* Make the virtual address and file offset synced if the alignment is} + ${RELOCATING+ lower than the target page size. */} + ${RELOCATING+. = SIZEOF_HEADERS;} + ${RELOCATING+. = ALIGN(__section_alignment__);} + .text ${RELOCATING+ __image_base__ + ( __section_alignment__ < ${TARGET_PAGE_SIZE} ? . : __section_alignment__ )} : + { + ${RELOCATING+ *(.init)} + *(.text) + ${R_TEXT} + *(.glue_7t) + *(.glue_7) + ${CONSTRUCTING+ ___CTOR_LIST__ = .; __CTOR_LIST__ = . ; + LONG (-1);*(.ctors); *(.ctor); *(SORT(.ctors.*)); LONG (0); } + ${CONSTRUCTING+ ___DTOR_LIST__ = .; __DTOR_LIST__ = . ; + LONG (-1); *(.dtors); *(.dtor); *(SORT(.dtors.*)); LONG (0); } + ${RELOCATING+ *(.fini)} + /* ??? Why is .gcc_exc here? */ + ${RELOCATING+ *(.gcc_exc)} + ${RELOCATING+PROVIDE (etext = .);} + *(.gcc_except_table) + } + + /* The Cygwin32 library uses a section to avoid copying certain data + on fork. This used to be named ".data$nocopy". The linker used + to include this between __data_start__ and __data_end__, but that + breaks building the cygwin32 dll. Instead, we name the section + ".data_cygwin_nocopy" and explictly include it after __data_end__. */ + + .data ${RELOCATING+BLOCK(__section_alignment__)} : + { + ${RELOCATING+__data_start__ = . ;} + *(.data) + *(.data2) + ${R_DATA} + *(.jcr) + ${RELOCATING+__data_end__ = . ;} + ${RELOCATING+*(.data_cygwin_nocopy)} + } + + .rdata ${RELOCATING+BLOCK(__section_alignment__)} : + { + *(.rdata) + ${R_RDATA} + *(.eh_frame) + ${RELOCATING+___RUNTIME_PSEUDO_RELOC_LIST__ = .;} + ${RELOCATING+__RUNTIME_PSEUDO_RELOC_LIST__ = .;} + *(.rdata_runtime_pseudo_reloc) + ${RELOCATING+___RUNTIME_PSEUDO_RELOC_LIST_END__ = .;} + ${RELOCATING+__RUNTIME_PSEUDO_RELOC_LIST_END__ = .;} + } + + .pdata ${RELOCATING+BLOCK(__section_alignment__)} : + { + *(.pdata) + } + + .bss ${RELOCATING+BLOCK(__section_alignment__)} : + { + ${RELOCATING+__bss_start__ = . ;} + *(.bss) + *(COMMON) + ${RELOCATING+__bss_end__ = . ;} + } + + .edata ${RELOCATING+BLOCK(__section_alignment__)} : + { + *(.edata) + } + + /DISCARD/ : + { + *(.debug\$S) + *(.debug\$T) + *(.debug\$F) + *(.drectve) + } + + .idata ${RELOCATING+BLOCK(__section_alignment__)} : + { + /* This cannot currently be handled with grouped sections. + See pep.em:sort_sections. */ + ${R_IDATA} + } + .CRT ${RELOCATING+BLOCK(__section_alignment__)} : + { + ${RELOCATING+___crt_xc_start__ = . ;} + ${R_CRT_XC} + ${RELOCATING+___crt_xc_end__ = . ;} + ${RELOCATING+___crt_xi_start__ = . ;} + ${R_CRT_XI} + ${RELOCATING+___crt_xi_end__ = . ;} + ${RELOCATING+___crt_xl_start__ = . ;} + ${R_CRT_XL} + /* ___crt_xl_end__ is defined in the TLS Directory support code */ + ${RELOCATING+___crt_xp_start__ = . ;} + ${R_CRT_XP} + ${RELOCATING+___crt_xp_end__ = . ;} + ${RELOCATING+___crt_xt_start__ = . ;} + ${R_CRT_XT} + ${RELOCATING+___crt_xt_end__ = . ;} + } + + .tls ${RELOCATING+BLOCK(__section_alignment__)} : + { + ${RELOCATING+___tls_start__ = . ;} + ${R_TLS} + ${RELOCATING+___tls_end__ = . ;} + } + + .endjunk ${RELOCATING+BLOCK(__section_alignment__)} : + { + /* end is deprecated, don't use it */ + ${RELOCATING+PROVIDE (end = .);} + ${RELOCATING+PROVIDE ( _end = .);} + ${RELOCATING+ __end__ = .;} + } + + .rsrc ${RELOCATING+BLOCK(__section_alignment__)} : + { + *(.rsrc) + ${R_RSRC} + } + + .reloc ${RELOCATING+BLOCK(__section_alignment__)} : + { + *(.reloc) + } + + .stab ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} : + { + *(.stab) + } + + .stabstr ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} : + { + *(.stabstr) + } + + /* DWARF debug sections. + Symbols in the DWARF debugging sections are relative to the beginning + of the section. Unlike other targets that fake this by putting the + section VMA at 0, the PE format will not allow it. */ + + /* DWARF 1.1 and DWARF 2. */ + .debug_aranges ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} : + { + *(.debug_aranges) + } + + .debug_pubnames ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} : + { + *(.debug_pubnames) + } + + /* DWARF 2. */ + .debug_info ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} : + { + *(.debug_info) *(.gnu.linkonce.wi.*) + } + + .debug_abbrev ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} : + { + *(.debug_abbrev) + } + + .debug_line ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} : + { + *(.debug_line) + } + + .debug_frame ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} : + { + *(.debug_frame) + } + + .debug_str ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} : + { + *(.debug_str) + } + + .debug_loc ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} : + { + *(.debug_loc) + } + + .debug_macinfo ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} : + { + *(.debug_macinfo) + } + + /* SGI/MIPS DWARF 2 extensions. */ + .debug_weaknames ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} : + { + *(.debug_weaknames) + } + + .debug_funcnames ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} : + { + *(.debug_funcnames) + } + + .debug_typenames ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} : + { + *(.debug_typenames) + } + + .debug_varnames ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} : + { + *(.debug_varnames) + } + + /* DWARF 3. */ + .debug_ranges ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} : + { + *(.debug_ranges) + } +} +EOF |
