diff options
Diffstat (limited to 'contrib/binutils/include/xregex2.h')
| -rw-r--r-- | contrib/binutils/include/xregex2.h | 571 |
1 files changed, 0 insertions, 571 deletions
diff --git a/contrib/binutils/include/xregex2.h b/contrib/binutils/include/xregex2.h deleted file mode 100644 index 2991daf..0000000 --- a/contrib/binutils/include/xregex2.h +++ /dev/null @@ -1,571 +0,0 @@ -/* Definitions for data structures and routines for the regular - expression library, version 0.12. - Copyright (C) 1985,1989-1993,1995-1998, 2000 Free Software Foundation, Inc. - This file is part of the GNU C Library. Its master source is NOT part of - the C library, however. The master source lives in /gd/gnu/lib. - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with the GNU C Library; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA - 02111-1307 USA. */ - -#ifndef _REGEX_H -#define _REGEX_H 1 - -/* Allow the use in C++ code. */ -#ifdef __cplusplus -extern "C" { -#endif - -/* POSIX says that <sys/types.h> must be included (by the caller) before - <regex.h>. */ - -#if !defined _POSIX_C_SOURCE && !defined _POSIX_SOURCE && defined VMS -/* VMS doesn't have `size_t' in <sys/types.h>, even though POSIX says it - should be there. */ -# include <stddef.h> -#endif - -/* The following two types have to be signed and unsigned integer type - wide enough to hold a value of a pointer. For most ANSI compilers - ptrdiff_t and size_t should be likely OK. Still size of these two - types is 2 for Microsoft C. Ugh... */ -typedef long int s_reg_t; -typedef unsigned long int active_reg_t; - -/* The following bits are used to determine the regexp syntax we - recognize. The set/not-set meanings are chosen so that Emacs syntax - remains the value 0. The bits are given in alphabetical order, and - the definitions shifted by one from the previous bit; thus, when we - add or remove a bit, only one other definition need change. */ -typedef unsigned long int reg_syntax_t; - -/* If this bit is not set, then \ inside a bracket expression is literal. - If set, then such a \ quotes the following character. */ -#define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1) - -/* If this bit is not set, then + and ? are operators, and \+ and \? are - literals. - If set, then \+ and \? are operators and + and ? are literals. */ -#define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1) - -/* If this bit is set, then character classes are supported. They are: - [:alpha:], [:upper:], [:lower:], [:digit:], [:alnum:], [:xdigit:], - [:space:], [:print:], [:punct:], [:graph:], and [:cntrl:]. - If not set, then character classes are not supported. */ -#define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1) - -/* If this bit is set, then ^ and $ are always anchors (outside bracket - expressions, of course). - If this bit is not set, then it depends: - ^ is an anchor if it is at the beginning of a regular - expression or after an open-group or an alternation operator; - $ is an anchor if it is at the end of a regular expression, or - before a close-group or an alternation operator. - - This bit could be (re)combined with RE_CONTEXT_INDEP_OPS, because - POSIX draft 11.2 says that * etc. in leading positions is undefined. - We already implemented a previous draft which made those constructs - invalid, though, so we haven't changed the code back. */ -#define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1) - -/* If this bit is set, then special characters are always special - regardless of where they are in the pattern. - If this bit is not set, then special characters are special only in - some contexts; otherwise they are ordinary. Specifically, - * + ? and intervals are only special when not after the beginning, - open-group, or alternation operator. */ -#define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1) - -/* If this bit is set, then *, +, ?, and { cannot be first in an re or - immediately after an alternation or begin-group operator. */ -#define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1) - -/* If this bit is set, then . matches newline. - If not set, then it doesn't. */ -#define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1) - -/* If this bit is set, then . doesn't match NUL. - If not set, then it does. */ -#define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1) - -/* If this bit is set, nonmatching lists [^...] do not match newline. - If not set, they do. */ -#define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1) - -/* If this bit is set, either \{...\} or {...} defines an - interval, depending on RE_NO_BK_BRACES. - If not set, \{, \}, {, and } are literals. */ -#define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1) - -/* If this bit is set, +, ? and | aren't recognized as operators. - If not set, they are. */ -#define RE_LIMITED_OPS (RE_INTERVALS << 1) - -/* If this bit is set, newline is an alternation operator. - If not set, newline is literal. */ -#define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1) - -/* If this bit is set, then `{...}' defines an interval, and \{ and \} - are literals. - If not set, then `\{...\}' defines an interval. */ -#define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1) - -/* If this bit is set, (...) defines a group, and \( and \) are literals. - If not set, \(...\) defines a group, and ( and ) are literals. */ -#define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1) - -/* If this bit is set, then \<digit> matches <digit>. - If not set, then \<digit> is a back-reference. */ -#define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1) - -/* If this bit is set, then | is an alternation operator, and \| is literal. - If not set, then \| is an alternation operator, and | is literal. */ -#define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1) - -/* If this bit is set, then an ending range point collating higher - than the starting range point, as in [z-a], is invalid. - If not set, then when ending range point collates higher than the - starting range point, the range is ignored. */ -#define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1) - -/* If this bit is set, then an unmatched ) is ordinary. - If not set, then an unmatched ) is invalid. */ -#define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1) - -/* If this bit is set, succeed as soon as we match the whole pattern, - without further backtracking. */ -#define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1) - -/* If this bit is set, do not process the GNU regex operators. - If not set, then the GNU regex operators are recognized. */ -#define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1) - -/* If this bit is set, turn on internal regex debugging. - If not set, and debugging was on, turn it off. - This only works if regex.c is compiled -DDEBUG. - We define this bit always, so that all that's needed to turn on - debugging is to recompile regex.c; the calling code can always have - this bit set, and it won't affect anything in the normal case. */ -#define RE_DEBUG (RE_NO_GNU_OPS << 1) - -/* If this bit is set, a syntactically invalid interval is treated as - a string of ordinary characters. For example, the ERE 'a{1' is - treated as 'a\{1'. */ -#define RE_INVALID_INTERVAL_ORD (RE_DEBUG << 1) - -/* This global variable defines the particular regexp syntax to use (for - some interfaces). When a regexp is compiled, the syntax used is - stored in the pattern buffer, so changing this does not affect - already-compiled regexps. */ -extern reg_syntax_t re_syntax_options; - -/* Define combinations of the above bits for the standard possibilities. - (The [[[ comments delimit what gets put into the Texinfo file, so - don't delete them!) */ -/* [[[begin syntaxes]]] */ -#define RE_SYNTAX_EMACS 0 - -#define RE_SYNTAX_AWK \ - (RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DOT_NOT_NULL \ - | RE_NO_BK_PARENS | RE_NO_BK_REFS \ - | RE_NO_BK_VBAR | RE_NO_EMPTY_RANGES \ - | RE_DOT_NEWLINE | RE_CONTEXT_INDEP_ANCHORS \ - | RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS) - -#define RE_SYNTAX_GNU_AWK \ - ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DEBUG) \ - & ~(RE_DOT_NOT_NULL | RE_INTERVALS | RE_CONTEXT_INDEP_OPS)) - -#define RE_SYNTAX_POSIX_AWK \ - (RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS \ - | RE_INTERVALS | RE_NO_GNU_OPS) - -#define RE_SYNTAX_GREP \ - (RE_BK_PLUS_QM | RE_CHAR_CLASSES \ - | RE_HAT_LISTS_NOT_NEWLINE | RE_INTERVALS \ - | RE_NEWLINE_ALT) - -#define RE_SYNTAX_EGREP \ - (RE_CHAR_CLASSES | RE_CONTEXT_INDEP_ANCHORS \ - | RE_CONTEXT_INDEP_OPS | RE_HAT_LISTS_NOT_NEWLINE \ - | RE_NEWLINE_ALT | RE_NO_BK_PARENS \ - | RE_NO_BK_VBAR) - -#define RE_SYNTAX_POSIX_EGREP \ - (RE_SYNTAX_EGREP | RE_INTERVALS | RE_NO_BK_BRACES \ - | RE_INVALID_INTERVAL_ORD) - -/* P1003.2/D11.2, section 4.20.7.1, lines 5078ff. */ -#define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC - -#define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC - -/* Syntax bits common to both basic and extended POSIX regex syntax. */ -#define _RE_SYNTAX_POSIX_COMMON \ - (RE_CHAR_CLASSES | RE_DOT_NEWLINE | RE_DOT_NOT_NULL \ - | RE_INTERVALS | RE_NO_EMPTY_RANGES) - -#define RE_SYNTAX_POSIX_BASIC \ - (_RE_SYNTAX_POSIX_COMMON | RE_BK_PLUS_QM) - -/* Differs from ..._POSIX_BASIC only in that RE_BK_PLUS_QM becomes - RE_LIMITED_OPS, i.e., \? \+ \| are not recognized. Actually, this - isn't minimal, since other operators, such as \`, aren't disabled. */ -#define RE_SYNTAX_POSIX_MINIMAL_BASIC \ - (_RE_SYNTAX_POSIX_COMMON | RE_LIMITED_OPS) - -#define RE_SYNTAX_POSIX_EXTENDED \ - (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \ - | RE_CONTEXT_INDEP_OPS | RE_NO_BK_BRACES \ - | RE_NO_BK_PARENS | RE_NO_BK_VBAR \ - | RE_CONTEXT_INVALID_OPS | RE_UNMATCHED_RIGHT_PAREN_ORD) - -/* Differs from ..._POSIX_EXTENDED in that RE_CONTEXT_INDEP_OPS is - removed and RE_NO_BK_REFS is added. */ -#define RE_SYNTAX_POSIX_MINIMAL_EXTENDED \ - (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \ - | RE_CONTEXT_INVALID_OPS | RE_NO_BK_BRACES \ - | RE_NO_BK_PARENS | RE_NO_BK_REFS \ - | RE_NO_BK_VBAR | RE_UNMATCHED_RIGHT_PAREN_ORD) -/* [[[end syntaxes]]] */ - -/* Maximum number of duplicates an interval can allow. Some systems - (erroneously) define this in other header files, but we want our - value, so remove any previous define. */ -#ifdef RE_DUP_MAX -# undef RE_DUP_MAX -#endif -/* If sizeof(int) == 2, then ((1 << 15) - 1) overflows. */ -#define RE_DUP_MAX (0x7fff) - - -/* POSIX `cflags' bits (i.e., information for `regcomp'). */ - -/* If this bit is set, then use extended regular expression syntax. - If not set, then use basic regular expression syntax. */ -#define REG_EXTENDED 1 - -/* If this bit is set, then ignore case when matching. - If not set, then case is significant. */ -#define REG_ICASE (REG_EXTENDED << 1) - -/* If this bit is set, then anchors do not match at newline - characters in the string. - If not set, then anchors do match at newlines. */ -#define REG_NEWLINE (REG_ICASE << 1) - -/* If this bit is set, then report only success or fail in regexec. - If not set, then returns differ between not matching and errors. */ -#define REG_NOSUB (REG_NEWLINE << 1) - - -/* POSIX `eflags' bits (i.e., information for regexec). */ - -/* If this bit is set, then the beginning-of-line operator doesn't match - the beginning of the string (presumably because it's not the - beginning of a line). - If not set, then the beginning-of-line operator does match the - beginning of the string. */ -#define REG_NOTBOL 1 - -/* Like REG_NOTBOL, except for the end-of-line. */ -#define REG_NOTEOL (1 << 1) - - -/* If any error codes are removed, changed, or added, update the - `re_error_msg' table in regex.c. */ -typedef enum -{ -#ifdef _XOPEN_SOURCE - REG_ENOSYS = -1, /* This will never happen for this implementation. */ -#endif - - REG_NOERROR = 0, /* Success. */ - REG_NOMATCH, /* Didn't find a match (for regexec). */ - - /* POSIX regcomp return error codes. (In the order listed in the - standard.) */ - REG_BADPAT, /* Invalid pattern. */ - REG_ECOLLATE, /* Not implemented. */ - REG_ECTYPE, /* Invalid character class name. */ - REG_EESCAPE, /* Trailing backslash. */ - REG_ESUBREG, /* Invalid back reference. */ - REG_EBRACK, /* Unmatched left bracket. */ - REG_EPAREN, /* Parenthesis imbalance. */ - REG_EBRACE, /* Unmatched \{. */ - REG_BADBR, /* Invalid contents of \{\}. */ - REG_ERANGE, /* Invalid range end. */ - REG_ESPACE, /* Ran out of memory. */ - REG_BADRPT, /* No preceding re for repetition op. */ - - /* Error codes we've added. */ - REG_EEND, /* Premature end. */ - REG_ESIZE, /* Compiled pattern bigger than 2^16 bytes. */ - REG_ERPAREN /* Unmatched ) or \); not returned from regcomp. */ -} reg_errcode_t; - -/* This data structure represents a compiled pattern. Before calling - the pattern compiler, the fields `buffer', `allocated', `fastmap', - `translate', and `no_sub' can be set. After the pattern has been - compiled, the `re_nsub' field is available. All other fields are - private to the regex routines. */ - -#ifndef RE_TRANSLATE_TYPE -# define RE_TRANSLATE_TYPE char * -#endif - -struct re_pattern_buffer -{ -/* [[[begin pattern_buffer]]] */ - /* Space that holds the compiled pattern. It is declared as - `unsigned char *' because its elements are - sometimes used as array indexes. */ - unsigned char *buffer; - - /* Number of bytes to which `buffer' points. */ - unsigned long int allocated; - - /* Number of bytes actually used in `buffer'. */ - unsigned long int used; - - /* Syntax setting with which the pattern was compiled. */ - reg_syntax_t syntax; - - /* Pointer to a fastmap, if any, otherwise zero. re_search uses - the fastmap, if there is one, to skip over impossible - starting points for matches. */ - char *fastmap; - - /* Either a translate table to apply to all characters before - comparing them, or zero for no translation. The translation - is applied to a pattern when it is compiled and to a string - when it is matched. */ - RE_TRANSLATE_TYPE translate; - - /* Number of subexpressions found by the compiler. */ - size_t re_nsub; - - /* Zero if this pattern cannot match the empty string, one else. - Well, in truth it's used only in `re_search_2', to see - whether or not we should use the fastmap, so we don't set - this absolutely perfectly; see `re_compile_fastmap' (the - `duplicate' case). */ - unsigned can_be_null : 1; - - /* If REGS_UNALLOCATED, allocate space in the `regs' structure - for `max (RE_NREGS, re_nsub + 1)' groups. - If REGS_REALLOCATE, reallocate space if necessary. - If REGS_FIXED, use what's there. */ -#define REGS_UNALLOCATED 0 -#define REGS_REALLOCATE 1 -#define REGS_FIXED 2 - unsigned regs_allocated : 2; - - /* Set to zero when `regex_compile' compiles a pattern; set to one - by `re_compile_fastmap' if it updates the fastmap. */ - unsigned fastmap_accurate : 1; - - /* If set, `re_match_2' does not return information about - subexpressions. */ - unsigned no_sub : 1; - - /* If set, a beginning-of-line anchor doesn't match at the - beginning of the string. */ - unsigned not_bol : 1; - - /* Similarly for an end-of-line anchor. */ - unsigned not_eol : 1; - - /* If true, an anchor at a newline matches. */ - unsigned newline_anchor : 1; - -/* [[[end pattern_buffer]]] */ -}; - -typedef struct re_pattern_buffer regex_t; - -/* Type for byte offsets within the string. POSIX mandates this. */ -typedef int regoff_t; - - -/* This is the structure we store register match data in. See - regex.texinfo for a full description of what registers match. */ -struct re_registers -{ - unsigned num_regs; - regoff_t *start; - regoff_t *end; -}; - - -/* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer, - `re_match_2' returns information about at least this many registers - the first time a `regs' structure is passed. */ -#ifndef RE_NREGS -# define RE_NREGS 30 -#endif - - -/* POSIX specification for registers. Aside from the different names than - `re_registers', POSIX uses an array of structures, instead of a - structure of arrays. */ -typedef struct -{ - regoff_t rm_so; /* Byte offset from string's start to substring's start. */ - regoff_t rm_eo; /* Byte offset from string's start to substring's end. */ -} regmatch_t; - -/* Declarations for routines. */ - -/* To avoid duplicating every routine declaration -- once with a - prototype (if we are ANSI), and once without (if we aren't) -- we - use the following macro to declare argument types. This - unfortunately clutters up the declarations a bit, but I think it's - worth it. */ - -#if __STDC__ - -# define _RE_ARGS(args) args - -#else /* not __STDC__ */ - -# define _RE_ARGS(args) () - -#endif /* not __STDC__ */ - -/* Sets the current default syntax to SYNTAX, and return the old syntax. - You can also simply assign to the `re_syntax_options' variable. */ -extern reg_syntax_t re_set_syntax _RE_ARGS ((reg_syntax_t syntax)); - -/* Compile the regular expression PATTERN, with length LENGTH - and syntax given by the global `re_syntax_options', into the buffer - BUFFER. Return NULL if successful, and an error string if not. */ -extern const char *re_compile_pattern - _RE_ARGS ((const char *pattern, size_t length, - struct re_pattern_buffer *buffer)); - - -/* Compile a fastmap for the compiled pattern in BUFFER; used to - accelerate searches. Return 0 if successful and -2 if was an - internal error. */ -extern int re_compile_fastmap _RE_ARGS ((struct re_pattern_buffer *buffer)); - - -/* Search in the string STRING (with length LENGTH) for the pattern - compiled into BUFFER. Start searching at position START, for RANGE - characters. Return the starting position of the match, -1 for no - match, or -2 for an internal error. Also return register - information in REGS (if REGS and BUFFER->no_sub are nonzero). */ -extern int re_search - _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string, - int length, int start, int range, struct re_registers *regs)); - - -/* Like `re_search', but search in the concatenation of STRING1 and - STRING2. Also, stop searching at index START + STOP. */ -extern int re_search_2 - _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1, - int length1, const char *string2, int length2, - int start, int range, struct re_registers *regs, int stop)); - - -/* Like `re_search', but return how many characters in STRING the regexp - in BUFFER matched, starting at position START. */ -extern int re_match - _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string, - int length, int start, struct re_registers *regs)); - - -/* Relates to `re_match' as `re_search_2' relates to `re_search'. */ -extern int re_match_2 - _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1, - int length1, const char *string2, int length2, - int start, struct re_registers *regs, int stop)); - - -/* Set REGS to hold NUM_REGS registers, storing them in STARTS and - ENDS. Subsequent matches using BUFFER and REGS will use this memory - for recording register information. STARTS and ENDS must be - allocated with malloc, and must each be at least `NUM_REGS * sizeof - (regoff_t)' bytes long. - - If NUM_REGS == 0, then subsequent matches should allocate their own - register data. - - Unless this function is called, the first search or match using - PATTERN_BUFFER will allocate its own register data, without - freeing the old data. */ -extern void re_set_registers - _RE_ARGS ((struct re_pattern_buffer *buffer, struct re_registers *regs, - unsigned num_regs, regoff_t *starts, regoff_t *ends)); - -#if defined _REGEX_RE_COMP || defined _LIBC -# ifndef _CRAY -/* 4.2 bsd compatibility. */ -extern char *re_comp _RE_ARGS ((const char *)); -extern int re_exec _RE_ARGS ((const char *)); -# endif -#endif - -/* GCC 2.95 and later have "__restrict"; C99 compilers have - "restrict", and "configure" may have defined "restrict". */ -#ifndef __restrict -# if ! (2 < __GNUC__ || (2 == __GNUC__ && 95 <= __GNUC_MINOR__)) -# if defined restrict || 199901L <= __STDC_VERSION__ -# define __restrict restrict -# else -# define __restrict -# endif -# endif -#endif - -/* GCC 3.1 and later support declaring arrays as non-overlapping - using the syntax array_name[restrict] */ -#ifndef __restrict_arr -# if ! (3 < __GNUC__ || (3 == __GNUC__ && 1 <= __GNUC_MINOR__)) || defined (__GNUG__) -# define __restrict_arr -# else -# define __restrict_arr __restrict -# endif -#endif - -/* POSIX compatibility. */ -extern int regcomp _RE_ARGS ((regex_t *__restrict __preg, - const char *__restrict __pattern, - int __cflags)); - -extern int regexec _RE_ARGS ((const regex_t *__restrict __preg, - const char *__restrict __string, size_t __nmatch, - regmatch_t __pmatch[__restrict_arr], - int __eflags)); - -extern size_t regerror _RE_ARGS ((int __errcode, const regex_t *__preg, - char *__errbuf, size_t __errbuf_size)); - -extern void regfree _RE_ARGS ((regex_t *__preg)); - - -#ifdef __cplusplus -} -#endif /* C++ */ - -#endif /* regex.h */ - -/* -Local variables: -make-backup-files: t -version-control: t -trim-versions-without-asking: nil -End: -*/ |
