diff options
Diffstat (limited to 'contrib/binutils/gas/config/tc-sh.c')
-rw-r--r-- | contrib/binutils/gas/config/tc-sh.c | 4054 |
1 files changed, 4054 insertions, 0 deletions
diff --git a/contrib/binutils/gas/config/tc-sh.c b/contrib/binutils/gas/config/tc-sh.c new file mode 100644 index 0000000..1361cb8 --- /dev/null +++ b/contrib/binutils/gas/config/tc-sh.c @@ -0,0 +1,4054 @@ +/* tc-sh.c -- Assemble code for the Hitachi Super-H + Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 + Free Software Foundation, Inc. + + This file is part of GAS, the GNU Assembler. + + GAS is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GAS is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GAS; see the file COPYING. If not, write to + the Free Software Foundation, 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ + +/* Written By Steve Chamberlain <sac@cygnus.com> */ + +#include <stdio.h> +#include "as.h" +#include "bfd.h" +#include "subsegs.h" +#define DEFINE_TABLE +#include "opcodes/sh-opc.h" +#include "safe-ctype.h" +#include "struc-symbol.h" + +#ifdef OBJ_ELF +#include "elf/sh.h" +#endif + +#include "dwarf2dbg.h" + +typedef struct + { + sh_arg_type type; + int reg; + expressionS immediate; + } +sh_operand_info; + +const char comment_chars[] = "!"; +const char line_separator_chars[] = ";"; +const char line_comment_chars[] = "!#"; + +static void s_uses PARAMS ((int)); + +static void sh_count_relocs PARAMS ((bfd *, segT, PTR)); +static void sh_frob_section PARAMS ((bfd *, segT, PTR)); + +static void s_uacons PARAMS ((int)); +static sh_opcode_info *find_cooked_opcode PARAMS ((char **)); +static unsigned int assemble_ppi PARAMS ((char *, sh_opcode_info *)); +static void little PARAMS ((int)); +static void big PARAMS ((int)); +static int parse_reg PARAMS ((char *, int *, int *)); +static char *parse_exp PARAMS ((char *, sh_operand_info *)); +static char *parse_at PARAMS ((char *, sh_operand_info *)); +static void get_operand PARAMS ((char **, sh_operand_info *)); +static char *get_operands + PARAMS ((sh_opcode_info *, char *, sh_operand_info *)); +static sh_opcode_info *get_specific + PARAMS ((sh_opcode_info *, sh_operand_info *)); +static void insert PARAMS ((char *, int, int, sh_operand_info *)); +static void build_relax PARAMS ((sh_opcode_info *, sh_operand_info *)); +static char *insert_loop_bounds PARAMS ((char *, sh_operand_info *)); +static unsigned int build_Mytes + PARAMS ((sh_opcode_info *, sh_operand_info *)); + +#ifdef OBJ_ELF +static void sh_elf_cons PARAMS ((int)); + +inline static int sh_PIC_related_p PARAMS ((symbolS *)); +static int sh_check_fixup PARAMS ((expressionS *, bfd_reloc_code_real_type *)); +inline static char *sh_end_of_match PARAMS ((char *, char *)); + +symbolS *GOT_symbol; /* Pre-defined "_GLOBAL_OFFSET_TABLE_" */ +#endif + +static void +big (ignore) + int ignore ATTRIBUTE_UNUSED; +{ + if (! target_big_endian) + as_bad (_("directive .big encountered when option -big required")); + + /* Stop further messages. */ + target_big_endian = 1; +} + +static void +little (ignore) + int ignore ATTRIBUTE_UNUSED; +{ + if (target_big_endian) + as_bad (_("directive .little encountered when option -little required")); + + /* Stop further messages. */ + target_big_endian = 0; +} + +/* This table describes all the machine specific pseudo-ops the assembler + has to support. The fields are: + pseudo-op name without dot + function to call to execute this pseudo-op + Integer arg to pass to the function. */ + +const pseudo_typeS md_pseudo_table[] = +{ +#ifdef OBJ_ELF + {"long", sh_elf_cons, 4}, + {"int", sh_elf_cons, 4}, + {"word", sh_elf_cons, 2}, + {"short", sh_elf_cons, 2}, +#else + {"int", cons, 4}, + {"word", cons, 2}, +#endif /* OBJ_ELF */ + {"big", big, 0}, + {"form", listing_psize, 0}, + {"little", little, 0}, + {"heading", listing_title, 0}, + {"import", s_ignore, 0}, + {"page", listing_eject, 0}, + {"program", s_ignore, 0}, + {"uses", s_uses, 0}, + {"uaword", s_uacons, 2}, + {"ualong", s_uacons, 4}, + {"uaquad", s_uacons, 8}, + {"2byte", s_uacons, 2}, + {"4byte", s_uacons, 4}, + {"8byte", s_uacons, 8}, +#ifdef BFD_ASSEMBLER + {"file", dwarf2_directive_file, 0 }, + {"loc", dwarf2_directive_loc, 0 }, +#endif +#ifdef HAVE_SH64 + {"mode", s_sh64_mode, 0 }, + + /* Have the old name too. */ + {"isa", s_sh64_mode, 0 }, + + /* Assert that the right ABI is used. */ + {"abi", s_sh64_abi, 0 }, + + { "vtable_inherit", sh64_vtable_inherit, 0 }, + { "vtable_entry", sh64_vtable_entry, 0 }, +#endif /* HAVE_SH64 */ + {0, 0, 0} +}; + +/*int md_reloc_size; */ + +int sh_relax; /* set if -relax seen */ + +/* Whether -small was seen. */ + +int sh_small; + +/* Whether -dsp was seen. */ + +static int sh_dsp; + +/* The bit mask of architectures that could + accomodate the insns seen so far. */ +static int valid_arch; + +const char EXP_CHARS[] = "eE"; + +/* Chars that mean this number is a floating point constant. */ +/* As in 0f12.456 */ +/* or 0d1.2345e12 */ +const char FLT_CHARS[] = "rRsSfFdDxXpP"; + +#define C(a,b) ENCODE_RELAX(a,b) + +#define ENCODE_RELAX(what,length) (((what) << 4) + (length)) +#define GET_WHAT(x) ((x>>4)) + +/* These are the three types of relaxable instrction. */ +/* These are the types of relaxable instructions; except for END which is + a marker. */ +#define COND_JUMP 1 +#define COND_JUMP_DELAY 2 +#define UNCOND_JUMP 3 + +#ifdef HAVE_SH64 + +/* A 16-bit (times four) pc-relative operand, at most expanded to 32 bits. */ +#define SH64PCREL16_32 4 +/* A 16-bit (times four) pc-relative operand, at most expanded to 64 bits. */ +#define SH64PCREL16_64 5 + +/* Variants of the above for adjusting the insn to PTA or PTB according to + the label. */ +#define SH64PCREL16PT_32 6 +#define SH64PCREL16PT_64 7 + +/* A MOVI expansion, expanding to at most 32 or 64 bits. */ +#define MOVI_IMM_32 8 +#define MOVI_IMM_32_PCREL 9 +#define MOVI_IMM_64 10 +#define MOVI_IMM_64_PCREL 11 +#define END 12 + +#else /* HAVE_SH64 */ + +#define END 4 + +#endif /* HAVE_SH64 */ + +#define UNDEF_DISP 0 +#define COND8 1 +#define COND12 2 +#define COND32 3 +#define UNDEF_WORD_DISP 4 + +#define UNCOND12 1 +#define UNCOND32 2 + +#ifdef HAVE_SH64 +#define UNDEF_SH64PCREL 0 +#define SH64PCREL16 1 +#define SH64PCREL32 2 +#define SH64PCREL48 3 +#define SH64PCREL64 4 +#define SH64PCRELPLT 5 + +#define UNDEF_MOVI 0 +#define MOVI_16 1 +#define MOVI_32 2 +#define MOVI_48 3 +#define MOVI_64 4 +#define MOVI_PLT 5 +#define MOVI_GOTOFF 6 +#define MOVI_GOTPC 7 +#endif /* HAVE_SH64 */ + +/* Branch displacements are from the address of the branch plus + four, thus all minimum and maximum values have 4 added to them. */ +#define COND8_F 258 +#define COND8_M -252 +#define COND8_LENGTH 2 + +/* There is one extra instruction before the branch, so we must add + two more bytes to account for it. */ +#define COND12_F 4100 +#define COND12_M -4090 +#define COND12_LENGTH 6 + +#define COND12_DELAY_LENGTH 4 + +/* ??? The minimum and maximum values are wrong, but this does not matter + since this relocation type is not supported yet. */ +#define COND32_F (1<<30) +#define COND32_M -(1<<30) +#define COND32_LENGTH 14 + +#define UNCOND12_F 4098 +#define UNCOND12_M -4092 +#define UNCOND12_LENGTH 2 + +/* ??? The minimum and maximum values are wrong, but this does not matter + since this relocation type is not supported yet. */ +#define UNCOND32_F (1<<30) +#define UNCOND32_M -(1<<30) +#define UNCOND32_LENGTH 14 + +#ifdef HAVE_SH64 +/* The trivial expansion of a SH64PCREL16 relaxation is just a "PT label, + TRd" as is the current insn, so no extra length. Note that the "reach" + is calculated from the address *after* that insn, but the offset in the + insn is calculated from the beginning of the insn. We also need to + take into account the implicit 1 coded as the "A" in PTA when counting + forward. If PTB reaches an odd address, we trap that as an error + elsewhere, so we don't have to have different relaxation entries. We + don't add a one to the negative range, since PTB would then have the + farthest backward-reaching value skipped, not generated at relaxation. */ +#define SH64PCREL16_F (32767 * 4 - 4 + 1) +#define SH64PCREL16_M (-32768 * 4 - 4) +#define SH64PCREL16_LENGTH 0 + +/* The next step is to change that PT insn into + MOVI ((label - datalabel Ln) >> 16) & 65535, R25 + SHORI (label - datalabel Ln) & 65535, R25 + Ln: + PTREL R25,TRd + which means two extra insns, 8 extra bytes. This is the limit for the + 32-bit ABI. + + The expressions look a bit bad since we have to adjust this to avoid overflow on a + 32-bit host. */ +#define SH64PCREL32_F ((((long) 1 << 30) - 1) * 2 + 1 - 4) +#define SH64PCREL32_LENGTH (2 * 4) + +/* Similarly, we just change the MOVI and add a SHORI for the 48-bit + expansion. */ +#if BFD_HOST_64BIT_LONG +/* The "reach" type is long, so we can only do this for a 64-bit-long + host. */ +#define SH64PCREL32_M (((long) -1 << 30) * 2 - 4) +#define SH64PCREL48_F ((((long) 1 << 47) - 1) - 4) +#define SH64PCREL48_M (((long) -1 << 47) - 4) +#define SH64PCREL48_LENGTH (3 * 4) +#else +/* If the host does not have 64-bit longs, just make this state identical + in reach to the 32-bit state. Note that we have a slightly incorrect + reach, but the correct one above will overflow a 32-bit number. */ +#define SH64PCREL32_M (((long) -1 << 30) * 2) +#define SH64PCREL48_F SH64PCREL32_F +#define SH64PCREL48_M SH64PCREL32_M +#define SH64PCREL48_LENGTH (3 * 4) +#endif /* BFD_HOST_64BIT_LONG */ + +/* And similarly for the 64-bit expansion; a MOVI + SHORI + SHORI + SHORI + + PTREL sequence. */ +#define SH64PCREL64_LENGTH (4 * 4) + +/* For MOVI, we make the MOVI + SHORI... expansion you can see in the + SH64PCREL expansions. The PCREL one is similar, but the other has no + pc-relative reach; it must be fully expanded in + shmedia_md_estimate_size_before_relax. */ +#define MOVI_16_LENGTH 0 +#define MOVI_16_F (32767 - 4) +#define MOVI_16_M (-32768 - 4) +#define MOVI_32_LENGTH 4 +#define MOVI_32_F ((((long) 1 << 30) - 1) * 2 + 1 - 4) +#define MOVI_48_LENGTH 8 + +#if BFD_HOST_64BIT_LONG +/* The "reach" type is long, so we can only do this for a 64-bit-long + host. */ +#define MOVI_32_M (((long) -1 << 30) * 2 - 4) +#define MOVI_48_F ((((long) 1 << 47) - 1) - 4) +#define MOVI_48_M (((long) -1 << 47) - 4) +#else +/* If the host does not have 64-bit longs, just make this state identical + in reach to the 32-bit state. Note that we have a slightly incorrect + reach, but the correct one above will overflow a 32-bit number. */ +#define MOVI_32_M (((long) -1 << 30) * 2) +#define MOVI_48_F MOVI_32_F +#define MOVI_48_M MOVI_32_M +#endif /* BFD_HOST_64BIT_LONG */ + +#define MOVI_64_LENGTH 12 +#endif /* HAVE_SH64 */ + +#define EMPTY { 0, 0, 0, 0 } + +const relax_typeS md_relax_table[C (END, 0)] = { + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + EMPTY, + /* C (COND_JUMP, COND8) */ + { COND8_F, COND8_M, COND8_LENGTH, C (COND_JUMP, COND12) }, + /* C (COND_JUMP, COND12) */ + { COND12_F, COND12_M, COND12_LENGTH, C (COND_JUMP, COND32), }, + /* C (COND_JUMP, COND32) */ + { COND32_F, COND32_M, COND32_LENGTH, 0, }, + /* C (COND_JUMP, UNDEF_WORD_DISP) */ + { 0, 0, COND32_LENGTH, 0, }, + EMPTY, EMPTY, EMPTY, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + EMPTY, + /* C (COND_JUMP_DELAY, COND8) */ + { COND8_F, COND8_M, COND8_LENGTH, C (COND_JUMP_DELAY, COND12) }, + /* C (COND_JUMP_DELAY, COND12) */ + { COND12_F, COND12_M, COND12_DELAY_LENGTH, C (COND_JUMP_DELAY, COND32), }, + /* C (COND_JUMP_DELAY, COND32) */ + { COND32_F, COND32_M, COND32_LENGTH, 0, }, + /* C (COND_JUMP_DELAY, UNDEF_WORD_DISP) */ + { 0, 0, COND32_LENGTH, 0, }, + EMPTY, EMPTY, EMPTY, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + EMPTY, + /* C (UNCOND_JUMP, UNCOND12) */ + { UNCOND12_F, UNCOND12_M, UNCOND12_LENGTH, C (UNCOND_JUMP, UNCOND32), }, + /* C (UNCOND_JUMP, UNCOND32) */ + { UNCOND32_F, UNCOND32_M, UNCOND32_LENGTH, 0, }, + EMPTY, + /* C (UNCOND_JUMP, UNDEF_WORD_DISP) */ + { 0, 0, UNCOND32_LENGTH, 0, }, + EMPTY, EMPTY, EMPTY, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + +#ifdef HAVE_SH64 + /* C (SH64PCREL16_32, SH64PCREL16) */ + EMPTY, + { SH64PCREL16_F, SH64PCREL16_M, SH64PCREL16_LENGTH, C (SH64PCREL16_32, SH64PCREL32) }, + /* C (SH64PCREL16_32, SH64PCREL32) */ + { 0, 0, SH64PCREL32_LENGTH, 0 }, + EMPTY, EMPTY, + /* C (SH64PCREL16_32, SH64PCRELPLT) */ + { 0, 0, SH64PCREL32_LENGTH, 0 }, + EMPTY, EMPTY, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + /* C (SH64PCREL16_64, SH64PCREL16) */ + EMPTY, + { SH64PCREL16_F, SH64PCREL16_M, SH64PCREL16_LENGTH, C (SH64PCREL16_64, SH64PCREL32) }, + /* C (SH64PCREL16_64, SH64PCREL32) */ + { SH64PCREL32_F, SH64PCREL32_M, SH64PCREL32_LENGTH, C (SH64PCREL16_64, SH64PCREL48) }, + /* C (SH64PCREL16_64, SH64PCREL48) */ + { SH64PCREL48_F, SH64PCREL48_M, SH64PCREL48_LENGTH, C (SH64PCREL16_64, SH64PCREL64) }, + /* C (SH64PCREL16_64, SH64PCREL64) */ + { 0, 0, SH64PCREL64_LENGTH, 0 }, + /* C (SH64PCREL16_64, SH64PCRELPLT) */ + { 0, 0, SH64PCREL64_LENGTH, 0 }, + EMPTY, EMPTY, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + /* C (SH64PCREL16PT_32, SH64PCREL16) */ + EMPTY, + { SH64PCREL16_F, SH64PCREL16_M, SH64PCREL16_LENGTH, C (SH64PCREL16PT_32, SH64PCREL32) }, + /* C (SH64PCREL16PT_32, SH64PCREL32) */ + { 0, 0, SH64PCREL32_LENGTH, 0 }, + EMPTY, EMPTY, + /* C (SH64PCREL16PT_32, SH64PCRELPLT) */ + { 0, 0, SH64PCREL32_LENGTH, 0 }, + EMPTY, EMPTY, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + /* C (SH64PCREL16PT_64, SH64PCREL16) */ + EMPTY, + { SH64PCREL16_F, SH64PCREL16_M, SH64PCREL16_LENGTH, C (SH64PCREL16PT_64, SH64PCREL32) }, + /* C (SH64PCREL16PT_64, SH64PCREL32) */ + { SH64PCREL32_F, + SH64PCREL32_M, + SH64PCREL32_LENGTH, + C (SH64PCREL16PT_64, SH64PCREL48) }, + /* C (SH64PCREL16PT_64, SH64PCREL48) */ + { SH64PCREL48_F, SH64PCREL48_M, SH64PCREL48_LENGTH, C (SH64PCREL16PT_64, SH64PCREL64) }, + /* C (SH64PCREL16PT_64, SH64PCREL64) */ + { 0, 0, SH64PCREL64_LENGTH, 0 }, + /* C (SH64PCREL16PT_64, SH64PCRELPLT) */ + { 0, 0, SH64PCREL64_LENGTH, 0}, + EMPTY, EMPTY, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + /* C (MOVI_IMM_32, UNDEF_MOVI) */ + { 0, 0, MOVI_32_LENGTH, 0 }, + /* C (MOVI_IMM_32, MOVI_16) */ + { MOVI_16_F, MOVI_16_M, MOVI_16_LENGTH, C (MOVI_IMM_32, MOVI_32) }, + /* C (MOVI_IMM_32, MOVI_32) */ + { MOVI_32_F, MOVI_32_M, MOVI_32_LENGTH, 0 }, + EMPTY, EMPTY, EMPTY, + /* C (MOVI_IMM_32, MOVI_GOTOFF) */ + { 0, 0, MOVI_32_LENGTH, 0 }, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + /* C (MOVI_IMM_32_PCREL, MOVI_16) */ + EMPTY, + { MOVI_16_F, MOVI_16_M, MOVI_16_LENGTH, C (MOVI_IMM_32_PCREL, MOVI_32) }, + /* C (MOVI_IMM_32_PCREL, MOVI_32) */ + { 0, 0, MOVI_32_LENGTH, 0 }, + EMPTY, EMPTY, + /* C (MOVI_IMM_32_PCREL, MOVI_PLT) */ + { 0, 0, MOVI_32_LENGTH, 0 }, + EMPTY, + /* C (MOVI_IMM_32_PCREL, MOVI_GOTPC) */ + { 0, 0, MOVI_32_LENGTH, 0 }, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + /* C (MOVI_IMM_64, UNDEF_MOVI) */ + { 0, 0, MOVI_64_LENGTH, 0 }, + /* C (MOVI_IMM_64, MOVI_16) */ + { MOVI_16_F, MOVI_16_M, MOVI_16_LENGTH, C (MOVI_IMM_64, MOVI_32) }, + /* C (MOVI_IMM_64, MOVI_32) */ + { MOVI_32_F, MOVI_32_M, MOVI_32_LENGTH, C (MOVI_IMM_64, MOVI_48) }, + /* C (MOVI_IMM_64, MOVI_48) */ + { MOVI_48_F, MOVI_48_M, MOVI_48_LENGTH, C (MOVI_IMM_64, MOVI_64) }, + /* C (MOVI_IMM_64, MOVI_64) */ + { 0, 0, MOVI_64_LENGTH, 0 }, + EMPTY, + /* C (MOVI_IMM_64, MOVI_GOTOFF) */ + { 0, 0, MOVI_64_LENGTH, 0 }, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + /* C (MOVI_IMM_64_PCREL, MOVI_16) */ + EMPTY, + { MOVI_16_F, MOVI_16_M, MOVI_16_LENGTH, C (MOVI_IMM_64_PCREL, MOVI_32) }, + /* C (MOVI_IMM_64_PCREL, MOVI_32) */ + { MOVI_32_F, MOVI_32_M, MOVI_32_LENGTH, C (MOVI_IMM_64_PCREL, MOVI_48) }, + /* C (MOVI_IMM_64_PCREL, MOVI_48) */ + { MOVI_48_F, MOVI_48_M, MOVI_48_LENGTH, C (MOVI_IMM_64_PCREL, MOVI_64) }, + /* C (MOVI_IMM_64_PCREL, MOVI_64) */ + { 0, 0, MOVI_64_LENGTH, 0 }, + /* C (MOVI_IMM_64_PCREL, MOVI_PLT) */ + { 0, 0, MOVI_64_LENGTH, 0 }, + EMPTY, + /* C (MOVI_IMM_64_PCREL, MOVI_GOTPC) */ + { 0, 0, MOVI_64_LENGTH, 0 }, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + +#endif /* HAVE_SH64 */ + +}; + +#undef EMPTY + +static struct hash_control *opcode_hash_control; /* Opcode mnemonics */ + + +#ifdef OBJ_ELF +/* Determinet whether the symbol needs any kind of PIC relocation. */ + +inline static int +sh_PIC_related_p (sym) + symbolS *sym; +{ + expressionS *exp; + + if (! sym) + return 0; + + if (sym == GOT_symbol) + return 1; + +#ifdef HAVE_SH64 + if (sh_PIC_related_p (*symbol_get_tc (sym))) + return 1; +#endif + + exp = symbol_get_value_expression (sym); + + return (exp->X_op == O_PIC_reloc + || sh_PIC_related_p (exp->X_add_symbol) + || sh_PIC_related_p (exp->X_op_symbol)); +} + +/* Determine the relocation type to be used to represent the + expression, that may be rearranged. */ + +static int +sh_check_fixup (main_exp, r_type_p) + expressionS *main_exp; + bfd_reloc_code_real_type *r_type_p; +{ + expressionS *exp = main_exp; + + /* This is here for backward-compatibility only. GCC used to generated: + + f@PLT + . - (.LPCS# + 2) + + but we'd rather be able to handle this as a PIC-related reference + plus/minus a symbol. However, gas' parser gives us: + + O_subtract (O_add (f@PLT, .), .LPCS#+2) + + so we attempt to transform this into: + + O_subtract (f@PLT, O_subtract (.LPCS#+2, .)) + + which we can handle simply below. */ + if (exp->X_op == O_subtract) + { + if (sh_PIC_related_p (exp->X_op_symbol)) + return 1; + + exp = symbol_get_value_expression (exp->X_add_symbol); + + if (exp && sh_PIC_related_p (exp->X_op_symbol)) + return 1; + + if (exp && exp->X_op == O_add + && sh_PIC_related_p (exp->X_add_symbol)) + { + symbolS *sym = exp->X_add_symbol; + + exp->X_op = O_subtract; + exp->X_add_symbol = main_exp->X_op_symbol; + + main_exp->X_op_symbol = main_exp->X_add_symbol; + main_exp->X_add_symbol = sym; + + main_exp->X_add_number += exp->X_add_number; + exp->X_add_number = 0; + } + + exp = main_exp; + } + else if (exp->X_op == O_add && sh_PIC_related_p (exp->X_op_symbol)) + return 1; + + if (exp->X_op == O_symbol || exp->X_op == O_add || exp->X_op == O_subtract) + { +#ifdef HAVE_SH64 + if (exp->X_add_symbol + && (exp->X_add_symbol == GOT_symbol + || (GOT_symbol + && *symbol_get_tc (exp->X_add_symbol) == GOT_symbol))) + { + switch (*r_type_p) + { + case BFD_RELOC_SH_IMM_LOW16: + *r_type_p = BFD_RELOC_SH_GOTPC_LOW16; + break; + + case BFD_RELOC_SH_IMM_MEDLOW16: + *r_type_p = BFD_RELOC_SH_GOTPC_MEDLOW16; + break; + + case BFD_RELOC_SH_IMM_MEDHI16: + *r_type_p = BFD_RELOC_SH_GOTPC_MEDHI16; + break; + + case BFD_RELOC_SH_IMM_HI16: + *r_type_p = BFD_RELOC_SH_GOTPC_HI16; + break; + + case BFD_RELOC_NONE: + case BFD_RELOC_UNUSED: + *r_type_p = BFD_RELOC_SH_GOTPC; + break; + + default: + abort (); + } + return 0; + } +#else + if (exp->X_add_symbol && exp->X_add_symbol == GOT_symbol) + { + *r_type_p = BFD_RELOC_SH_GOTPC; + return 0; + } +#endif + exp = symbol_get_value_expression (exp->X_add_symbol); + if (! exp) + return 0; + } + + if (exp->X_op == O_PIC_reloc) + { +#ifdef HAVE_SH64 + switch (*r_type_p) + { + case BFD_RELOC_NONE: + case BFD_RELOC_UNUSED: + *r_type_p = exp->X_md; + break; + + case BFD_RELOC_SH_IMM_LOW16: + switch (exp->X_md) + { + case BFD_RELOC_32_GOTOFF: + *r_type_p = BFD_RELOC_SH_GOTOFF_LOW16; + break; + + case BFD_RELOC_SH_GOTPLT32: + *r_type_p = BFD_RELOC_SH_GOTPLT_LOW16; + break; + + case BFD_RELOC_32_GOT_PCREL: + *r_type_p = BFD_RELOC_SH_GOT_LOW16; + break; + + case BFD_RELOC_32_PLT_PCREL: + *r_type_p = BFD_RELOC_SH_PLT_LOW16; + break; + + default: + abort (); + } + break; + + case BFD_RELOC_SH_IMM_MEDLOW16: + switch (exp->X_md) + { + case BFD_RELOC_32_GOTOFF: + *r_type_p = BFD_RELOC_SH_GOTOFF_MEDLOW16; + break; + + case BFD_RELOC_SH_GOTPLT32: + *r_type_p = BFD_RELOC_SH_GOTPLT_MEDLOW16; + break; + + case BFD_RELOC_32_GOT_PCREL: + *r_type_p = BFD_RELOC_SH_GOT_MEDLOW16; + break; + + case BFD_RELOC_32_PLT_PCREL: + *r_type_p = BFD_RELOC_SH_PLT_MEDLOW16; + break; + + default: + abort (); + } + break; + + case BFD_RELOC_SH_IMM_MEDHI16: + switch (exp->X_md) + { + case BFD_RELOC_32_GOTOFF: + *r_type_p = BFD_RELOC_SH_GOTOFF_MEDHI16; + break; + + case BFD_RELOC_SH_GOTPLT32: + *r_type_p = BFD_RELOC_SH_GOTPLT_MEDHI16; + break; + + case BFD_RELOC_32_GOT_PCREL: + *r_type_p = BFD_RELOC_SH_GOT_MEDHI16; + break; + + case BFD_RELOC_32_PLT_PCREL: + *r_type_p = BFD_RELOC_SH_PLT_MEDHI16; + break; + + default: + abort (); + } + break; + + case BFD_RELOC_SH_IMM_HI16: + switch (exp->X_md) + { + case BFD_RELOC_32_GOTOFF: + *r_type_p = BFD_RELOC_SH_GOTOFF_HI16; + break; + + case BFD_RELOC_SH_GOTPLT32: + *r_type_p = BFD_RELOC_SH_GOTPLT_HI16; + break; + + case BFD_RELOC_32_GOT_PCREL: + *r_type_p = BFD_RELOC_SH_GOT_HI16; + break; + + case BFD_RELOC_32_PLT_PCREL: + *r_type_p = BFD_RELOC_SH_PLT_HI16; + break; + + default: + abort (); + } + break; + + default: + abort (); + } +#else + *r_type_p = exp->X_md; +#endif + if (exp == main_exp) + exp->X_op = O_symbol; + else + { + main_exp->X_add_symbol = exp->X_add_symbol; + main_exp->X_add_number += exp->X_add_number; + } + } + else + return (sh_PIC_related_p (exp->X_add_symbol) + || sh_PIC_related_p (exp->X_op_symbol)); + + return 0; +} + +/* Add expression EXP of SIZE bytes to offset OFF of fragment FRAG. */ + +void +sh_cons_fix_new (frag, off, size, exp) + fragS *frag; + int off, size; + expressionS *exp; +{ + bfd_reloc_code_real_type r_type = BFD_RELOC_UNUSED; + + if (sh_check_fixup (exp, &r_type)) + as_bad (_("Invalid PIC expression.")); + + if (r_type == BFD_RELOC_UNUSED) + switch (size) + { + case 1: + r_type = BFD_RELOC_8; + break; + + case 2: + r_type = BFD_RELOC_16; + break; + + case 4: + r_type = BFD_RELOC_32; + break; + +#ifdef HAVE_SH64 + case 8: + r_type = BFD_RELOC_64; + break; +#endif + + default: + goto error; + } + else if (size != 4) + { + error: + as_bad (_("unsupported BFD relocation size %u"), size); + r_type = BFD_RELOC_UNUSED; + } + + fix_new_exp (frag, off, size, exp, 0, r_type); +} + +/* The regular cons() function, that reads constants, doesn't support + suffixes such as @GOT, @GOTOFF and @PLT, that generate + machine-specific relocation types. So we must define it here. */ +/* Clobbers input_line_pointer, checks end-of-line. */ +static void +sh_elf_cons (nbytes) + register int nbytes; /* 1=.byte, 2=.word, 4=.long */ +{ + expressionS exp; + +#ifdef HAVE_SH64 + + /* Update existing range to include a previous insn, if there was one. */ + sh64_update_contents_mark (true); + + /* We need to make sure the contents type is set to data. */ + sh64_flag_output (); + +#endif /* HAVE_SH64 */ + + if (is_it_end_of_statement ()) + { + demand_empty_rest_of_line (); + return; + } + + do + { + expression (&exp); + emit_expr (&exp, (unsigned int) nbytes); + } + while (*input_line_pointer++ == ','); + + input_line_pointer--; /* Put terminator back into stream. */ + if (*input_line_pointer == '#' || *input_line_pointer == '!') + { + while (! is_end_of_line[(unsigned char) *input_line_pointer++]); + } + else + demand_empty_rest_of_line (); +} +#endif /* OBJ_ELF */ + + +/* This function is called once, at assembler startup time. This should + set up all the tables, etc that the MD part of the assembler needs. */ + +void +md_begin () +{ + sh_opcode_info *opcode; + char *prev_name = ""; + int target_arch; + + target_arch = arch_sh1_up & ~(sh_dsp ? arch_sh3e_up : arch_sh_dsp_up); + valid_arch = target_arch; + +#ifdef HAVE_SH64 + shmedia_md_begin (); +#endif + + opcode_hash_control = hash_new (); + + /* Insert unique names into hash table. */ + for (opcode = sh_table; opcode->name; opcode++) + { + if (strcmp (prev_name, opcode->name)) + { + if (! (opcode->arch & target_arch)) + continue; + prev_name = opcode->name; + hash_insert (opcode_hash_control, opcode->name, (char *) opcode); + } + else + { + /* Make all the opcodes with the same name point to the same + string. */ + opcode->name = prev_name; + } + } +} + +static int reg_m; +static int reg_n; +static int reg_x, reg_y; +static int reg_efg; +static int reg_b; + +#define IDENT_CHAR(c) (ISALNUM (c) || (c) == '_') + +/* Try to parse a reg name. Return the number of chars consumed. */ + +static int +parse_reg (src, mode, reg) + char *src; + int *mode; + int *reg; +{ + char l0 = TOLOWER (src[0]); + char l1 = l0 ? TOLOWER (src[1]) : 0; + + /* We use ! IDENT_CHAR for the next character after the register name, to + make sure that we won't accidentally recognize a symbol name such as + 'sram' or sr_ram as being a reference to the register 'sr'. */ + + if (l0 == 'r') + { + if (l1 == '1') + { + if (src[2] >= '0' && src[2] <= '5' + && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = A_REG_N; + *reg = 10 + src[2] - '0'; + return 3; + } + } + if (l1 >= '0' && l1 <= '9' + && ! IDENT_CHAR ((unsigned char) src[2])) + { + *mode = A_REG_N; + *reg = (l1 - '0'); + return 2; + } + if (l1 >= '0' && l1 <= '7' && strncasecmp (&src[2], "_bank", 5) == 0 + && ! IDENT_CHAR ((unsigned char) src[7])) + { + *mode = A_REG_B; + *reg = (l1 - '0'); + return 7; + } + + if (l1 == 'e' && ! IDENT_CHAR ((unsigned char) src[2])) + { + *mode = A_RE; + return 2; + } + if (l1 == 's' && ! IDENT_CHAR ((unsigned char) src[2])) + { + *mode = A_RS; + return 2; + } + } + + if (l0 == 'a') + { + if (l1 == '0') + { + if (! IDENT_CHAR ((unsigned char) src[2])) + { + *mode = DSP_REG_N; + *reg = A_A0_NUM; + return 2; + } + if (TOLOWER (src[2]) == 'g' && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = DSP_REG_N; + *reg = A_A0G_NUM; + return 3; + } + } + if (l1 == '1') + { + if (! IDENT_CHAR ((unsigned char) src[2])) + { + *mode = DSP_REG_N; + *reg = A_A1_NUM; + return 2; + } + if (TOLOWER (src[2]) == 'g' && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = DSP_REG_N; + *reg = A_A1G_NUM; + return 3; + } + } + + if (l1 == 'x' && src[2] >= '0' && src[2] <= '1' + && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = A_REG_N; + *reg = 4 + (l1 - '0'); + return 3; + } + if (l1 == 'y' && src[2] >= '0' && src[2] <= '1' + && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = A_REG_N; + *reg = 6 + (l1 - '0'); + return 3; + } + if (l1 == 's' && src[2] >= '0' && src[2] <= '3' + && ! IDENT_CHAR ((unsigned char) src[3])) + { + int n = l1 - '0'; + + *mode = A_REG_N; + *reg = n | ((~n & 2) << 1); + return 3; + } + } + + if (l0 == 'i' && l1 && ! IDENT_CHAR ((unsigned char) src[2])) + { + if (l1 == 's') + { + *mode = A_REG_N; + *reg = 8; + return 2; + } + if (l1 == 'x') + { + *mode = A_REG_N; + *reg = 8; + return 2; + } + if (l1 == 'y') + { + *mode = A_REG_N; + *reg = 9; + return 2; + } + } + + if (l0 == 'x' && l1 >= '0' && l1 <= '1' + && ! IDENT_CHAR ((unsigned char) src[2])) + { + *mode = DSP_REG_N; + *reg = A_X0_NUM + l1 - '0'; + return 2; + } + + if (l0 == 'y' && l1 >= '0' && l1 <= '1' + && ! IDENT_CHAR ((unsigned char) src[2])) + { + *mode = DSP_REG_N; + *reg = A_Y0_NUM + l1 - '0'; + return 2; + } + + if (l0 == 'm' && l1 >= '0' && l1 <= '1' + && ! IDENT_CHAR ((unsigned char) src[2])) + { + *mode = DSP_REG_N; + *reg = l1 == '0' ? A_M0_NUM : A_M1_NUM; + return 2; + } + + if (l0 == 's' + && l1 == 's' + && TOLOWER (src[2]) == 'r' && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = A_SSR; + return 3; + } + + if (l0 == 's' && l1 == 'p' && TOLOWER (src[2]) == 'c' + && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = A_SPC; + return 3; + } + + if (l0 == 's' && l1 == 'g' && TOLOWER (src[2]) == 'r' + && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = A_SGR; + return 3; + } + + if (l0 == 'd' && l1 == 's' && TOLOWER (src[2]) == 'r' + && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = A_DSR; + return 3; + } + + if (l0 == 'd' && l1 == 'b' && TOLOWER (src[2]) == 'r' + && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = A_DBR; + return 3; + } + + if (l0 == 's' && l1 == 'r' && ! IDENT_CHAR ((unsigned char) src[2])) + { + *mode = A_SR; + return 2; + } + + if (l0 == 's' && l1 == 'p' && ! IDENT_CHAR ((unsigned char) src[2])) + { + *mode = A_REG_N; + *reg = 15; + return 2; + } + + if (l0 == 'p' && l1 == 'r' && ! IDENT_CHAR ((unsigned char) src[2])) + { + *mode = A_PR; + return 2; + } + if (l0 == 'p' && l1 == 'c' && ! IDENT_CHAR ((unsigned char) src[2])) + { + /* Don't use A_DISP_PC here - that would accept stuff like 'mova pc,r0' + and use an uninitialized immediate. */ + *mode = A_PC; + return 2; + } + if (l0 == 'g' && l1 == 'b' && TOLOWER (src[2]) == 'r' + && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = A_GBR; + return 3; + } + if (l0 == 'v' && l1 == 'b' && TOLOWER (src[2]) == 'r' + && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = A_VBR; + return 3; + } + + if (l0 == 'm' && l1 == 'a' && TOLOWER (src[2]) == 'c' + && ! IDENT_CHAR ((unsigned char) src[4])) + { + if (TOLOWER (src[3]) == 'l') + { + *mode = A_MACL; + return 4; + } + if (TOLOWER (src[3]) == 'h') + { + *mode = A_MACH; + return 4; + } + } + if (l0 == 'm' && l1 == 'o' && TOLOWER (src[2]) == 'd' + && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = A_MOD; + return 3; + } + if (l0 == 'f' && l1 == 'r') + { + if (src[2] == '1') + { + if (src[3] >= '0' && src[3] <= '5' + && ! IDENT_CHAR ((unsigned char) src[4])) + { + *mode = F_REG_N; + *reg = 10 + src[3] - '0'; + return 4; + } + } + if (src[2] >= '0' && src[2] <= '9' + && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = F_REG_N; + *reg = (src[2] - '0'); + return 3; + } + } + if (l0 == 'd' && l1 == 'r') + { + if (src[2] == '1') + { + if (src[3] >= '0' && src[3] <= '4' && ! ((src[3] - '0') & 1) + && ! IDENT_CHAR ((unsigned char) src[4])) + { + *mode = D_REG_N; + *reg = 10 + src[3] - '0'; + return 4; + } + } + if (src[2] >= '0' && src[2] <= '8' && ! ((src[2] - '0') & 1) + && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = D_REG_N; + *reg = (src[2] - '0'); + return 3; + } + } + if (l0 == 'x' && l1 == 'd') + { + if (src[2] == '1') + { + if (src[3] >= '0' && src[3] <= '4' && ! ((src[3] - '0') & 1) + && ! IDENT_CHAR ((unsigned char) src[4])) + { + *mode = X_REG_N; + *reg = 11 + src[3] - '0'; + return 4; + } + } + if (src[2] >= '0' && src[2] <= '8' && ! ((src[2] - '0') & 1) + && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = X_REG_N; + *reg = (src[2] - '0') + 1; + return 3; + } + } + if (l0 == 'f' && l1 == 'v') + { + if (src[2] == '1'&& src[3] == '2' && ! IDENT_CHAR ((unsigned char) src[4])) + { + *mode = V_REG_N; + *reg = 12; + return 4; + } + if ((src[2] == '0' || src[2] == '4' || src[2] == '8') + && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = V_REG_N; + *reg = (src[2] - '0'); + return 3; + } + } + if (l0 == 'f' && l1 == 'p' && TOLOWER (src[2]) == 'u' + && TOLOWER (src[3]) == 'l' + && ! IDENT_CHAR ((unsigned char) src[4])) + { + *mode = FPUL_N; + return 4; + } + + if (l0 == 'f' && l1 == 'p' && TOLOWER (src[2]) == 's' + && TOLOWER (src[3]) == 'c' + && TOLOWER (src[4]) == 'r' && ! IDENT_CHAR ((unsigned char) src[5])) + { + *mode = FPSCR_N; + return 5; + } + + if (l0 == 'x' && l1 == 'm' && TOLOWER (src[2]) == 't' + && TOLOWER (src[3]) == 'r' + && TOLOWER (src[4]) == 'x' && ! IDENT_CHAR ((unsigned char) src[5])) + { + *mode = XMTRX_M4; + return 5; + } + + return 0; +} + +static char * +parse_exp (s, op) + char *s; + sh_operand_info *op; +{ + char *save; + char *new; + + save = input_line_pointer; + input_line_pointer = s; + expression (&op->immediate); + if (op->immediate.X_op == O_absent) + as_bad (_("missing operand")); +#ifdef OBJ_ELF + else if (op->immediate.X_op == O_PIC_reloc + || sh_PIC_related_p (op->immediate.X_add_symbol) + || sh_PIC_related_p (op->immediate.X_op_symbol)) + as_bad (_("misplaced PIC operand")); +#endif + new = input_line_pointer; + input_line_pointer = save; + return new; +} + +/* The many forms of operand: + + Rn Register direct + @Rn Register indirect + @Rn+ Autoincrement + @-Rn Autodecrement + @(disp:4,Rn) + @(disp:8,GBR) + @(disp:8,PC) + + @(R0,Rn) + @(R0,GBR) + + disp:8 + disp:12 + #imm8 + pr, gbr, vbr, macl, mach + */ + +static char * +parse_at (src, op) + char *src; + sh_operand_info *op; +{ + int len; + int mode; + src++; + if (src[0] == '-') + { + /* Must be predecrement. */ + src++; + + len = parse_reg (src, &mode, &(op->reg)); + if (mode != A_REG_N) + as_bad (_("illegal register after @-")); + + op->type = A_DEC_N; + src += len; + } + else if (src[0] == '(') + { + /* Could be @(disp, rn), @(disp, gbr), @(disp, pc), @(r0, gbr) or + @(r0, rn). */ + src++; + len = parse_reg (src, &mode, &(op->reg)); + if (len && mode == A_REG_N) + { + src += len; + if (op->reg != 0) + { + as_bad (_("must be @(r0,...)")); + } + if (src[0] == ',') + { + src++; + /* Now can be rn or gbr. */ + len = parse_reg (src, &mode, &(op->reg)); + } + else + { + len = 0; + } + if (len) + { + if (mode == A_GBR) + { + op->type = A_R0_GBR; + } + else if (mode == A_REG_N) + { + op->type = A_IND_R0_REG_N; + } + else + { + as_bad (_("syntax error in @(r0,...)")); + } + } + else + { + as_bad (_("syntax error in @(r0...)")); + } + } + else + { + /* Must be an @(disp,.. thing). */ + src = parse_exp (src, op); + if (src[0] == ',') + src++; + /* Now can be rn, gbr or pc. */ + len = parse_reg (src, &mode, &op->reg); + if (len) + { + if (mode == A_REG_N) + { + op->type = A_DISP_REG_N; + } + else if (mode == A_GBR) + { + op->type = A_DISP_GBR; + } + else if (mode == A_PC) + { + /* We want @(expr, pc) to uniformly address . + expr, + no matter if expr is a constant, or a more complex + expression, e.g. sym-. or sym1-sym2. + However, we also used to accept @(sym,pc) + as adressing sym, i.e. meaning the same as plain sym. + Some existing code does use the @(sym,pc) syntax, so + we give it the old semantics for now, but warn about + its use, so that users have some time to fix their code. + + Note that due to this backward compatibility hack, + we'll get unexpected results when @(offset, pc) is used, + and offset is a symbol that is set later to an an address + difference, or an external symbol that is set to an + address difference in another source file, so we want to + eventually remove it. */ + if (op->immediate.X_op == O_symbol) + { + op->type = A_DISP_PC; + as_warn (_("Deprecated syntax.")); + } + else + { + op->type = A_DISP_PC_ABS; + /* Such operands don't get corrected for PC==.+4, so + make the correction here. */ + op->immediate.X_add_number -= 4; + } + } + else + { + as_bad (_("syntax error in @(disp,[Rn, gbr, pc])")); + } + } + else + { + as_bad (_("syntax error in @(disp,[Rn, gbr, pc])")); + } + } + src += len; + if (src[0] != ')') + as_bad (_("expecting )")); + else + src++; + } + else + { + src += parse_reg (src, &mode, &(op->reg)); + if (mode != A_REG_N) + as_bad (_("illegal register after @")); + + if (src[0] == '+') + { + char l0, l1; + + src++; + l0 = TOLOWER (src[0]); + l1 = TOLOWER (src[1]); + + if ((l0 == 'r' && l1 == '8') + || (l0 == 'i' && (l1 == 'x' || l1 == 's'))) + { + src += 2; + op->type = A_PMOD_N; + } + else if ( (l0 == 'r' && l1 == '9') + || (l0 == 'i' && l1 == 'y')) + { + src += 2; + op->type = A_PMODY_N; + } + else + op->type = A_INC_N; + } + else + op->type = A_IND_N; + } + return src; +} + +static void +get_operand (ptr, op) + char **ptr; + sh_operand_info *op; +{ + char *src = *ptr; + int mode = -1; + unsigned int len; + + if (src[0] == '#') + { + src++; + *ptr = parse_exp (src, op); + op->type = A_IMM; + return; + } + + else if (src[0] == '@') + { + *ptr = parse_at (src, op); + return; + } + len = parse_reg (src, &mode, &(op->reg)); + if (len) + { + *ptr = src + len; + op->type = mode; + return; + } + else + { + /* Not a reg, the only thing left is a displacement. */ + *ptr = parse_exp (src, op); + op->type = A_DISP_PC; + return; + } +} + +static char * +get_operands (info, args, operand) + sh_opcode_info *info; + char *args; + sh_operand_info *operand; +{ + char *ptr = args; + if (info->arg[0]) + { + /* The pre-processor will eliminate whitespace in front of '@' + after the first argument; we may be called multiple times + from assemble_ppi, so don't insist on finding whitespace here. */ + if (*ptr == ' ') + ptr++; + + get_operand (&ptr, operand + 0); + if (info->arg[1]) + { + if (*ptr == ',') + { + ptr++; + } + get_operand (&ptr, operand + 1); + /* ??? Hack: psha/pshl have a varying operand number depending on + the type of the first operand. We handle this by having the + three-operand version first and reducing the number of operands + parsed to two if we see that the first operand is an immediate. + This works because no insn with three operands has an immediate + as first operand. */ + if (info->arg[2] && operand[0].type != A_IMM) + { + if (*ptr == ',') + { + ptr++; + } + get_operand (&ptr, operand + 2); + } + else + { + operand[2].type = 0; + } + } + else + { + operand[1].type = 0; + operand[2].type = 0; + } + } + else + { + operand[0].type = 0; + operand[1].type = 0; + operand[2].type = 0; + } + return ptr; +} + +/* Passed a pointer to a list of opcodes which use different + addressing modes, return the opcode which matches the opcodes + provided. */ + +static sh_opcode_info * +get_specific (opcode, operands) + sh_opcode_info *opcode; + sh_operand_info *operands; +{ + sh_opcode_info *this_try = opcode; + char *name = opcode->name; + int n = 0; + + while (opcode->name) + { + this_try = opcode++; + if (this_try->name != name) + { + /* We've looked so far down the table that we've run out of + opcodes with the same name. */ + return 0; + } + + /* Look at both operands needed by the opcodes and provided by + the user - since an arg test will often fail on the same arg + again and again, we'll try and test the last failing arg the + first on each opcode try. */ + for (n = 0; this_try->arg[n]; n++) + { + sh_operand_info *user = operands + n; + sh_arg_type arg = this_try->arg[n]; + + switch (arg) + { + case A_DISP_PC: + if (user->type == A_DISP_PC_ABS) + break; + /* Fall through. */ + case A_IMM: + case A_BDISP12: + case A_BDISP8: + case A_DISP_GBR: + case A_MACH: + case A_PR: + case A_MACL: + if (user->type != arg) + goto fail; + break; + case A_R0: + /* opcode needs r0 */ + if (user->type != A_REG_N || user->reg != 0) + goto fail; + break; + case A_R0_GBR: + if (user->type != A_R0_GBR || user->reg != 0) + goto fail; + break; + case F_FR0: + if (user->type != F_REG_N || user->reg != 0) + goto fail; + break; + + case A_REG_N: + case A_INC_N: + case A_DEC_N: + case A_IND_N: + case A_IND_R0_REG_N: + case A_DISP_REG_N: + case F_REG_N: + case D_REG_N: + case X_REG_N: + case V_REG_N: + case FPUL_N: + case FPSCR_N: + case A_PMOD_N: + case A_PMODY_N: + case DSP_REG_N: + /* Opcode needs rn */ + if (user->type != arg) + goto fail; + reg_n = user->reg; + break; + case DX_REG_N: + if (user->type != D_REG_N && user->type != X_REG_N) + goto fail; + reg_n = user->reg; + break; + case A_GBR: + case A_SR: + case A_VBR: + case A_DSR: + case A_MOD: + case A_RE: + case A_RS: + case A_SSR: + case A_SPC: + case A_SGR: + case A_DBR: + if (user->type != arg) + goto fail; + break; + + case A_REG_B: + if (user->type != arg) + goto fail; + reg_b = user->reg; + break; + + case A_REG_M: + case A_INC_M: + case A_DEC_M: + case A_IND_M: + case A_IND_R0_REG_M: + case A_DISP_REG_M: + case DSP_REG_M: + /* Opcode needs rn */ + if (user->type != arg - A_REG_M + A_REG_N) + goto fail; + reg_m = user->reg; + break; + + case DSP_REG_X: + if (user->type != DSP_REG_N) + goto fail; + switch (user->reg) + { + case A_X0_NUM: + reg_x = 0; + break; + case A_X1_NUM: + reg_x = 1; + break; + case A_A0_NUM: + reg_x = 2; + break; + case A_A1_NUM: + reg_x = 3; + break; + default: + goto fail; + } + break; + + case DSP_REG_Y: + if (user->type != DSP_REG_N) + goto fail; + switch (user->reg) + { + case A_Y0_NUM: + reg_y = 0; + break; + case A_Y1_NUM: + reg_y = 1; + break; + case A_M0_NUM: + reg_y = 2; + break; + case A_M1_NUM: + reg_y = 3; + break; + default: + goto fail; + } + break; + + case DSP_REG_E: + if (user->type != DSP_REG_N) + goto fail; + switch (user->reg) + { + case A_X0_NUM: + reg_efg = 0 << 10; + break; + case A_X1_NUM: + reg_efg = 1 << 10; + break; + case A_Y0_NUM: + reg_efg = 2 << 10; + break; + case A_A1_NUM: + reg_efg = 3 << 10; + break; + default: + goto fail; + } + break; + + case DSP_REG_F: + if (user->type != DSP_REG_N) + goto fail; + switch (user->reg) + { + case A_Y0_NUM: + reg_efg |= 0 << 8; + break; + case A_Y1_NUM: + reg_efg |= 1 << 8; + break; + case A_X0_NUM: + reg_efg |= 2 << 8; + break; + case A_A1_NUM: + reg_efg |= 3 << 8; + break; + default: + goto fail; + } + break; + + case DSP_REG_G: + if (user->type != DSP_REG_N) + goto fail; + switch (user->reg) + { + case A_M0_NUM: + reg_efg |= 0 << 2; + break; + case A_M1_NUM: + reg_efg |= 1 << 2; + break; + case A_A0_NUM: + reg_efg |= 2 << 2; + break; + case A_A1_NUM: + reg_efg |= 3 << 2; + break; + default: + goto fail; + } + break; + + case A_A0: + if (user->type != DSP_REG_N || user->reg != A_A0_NUM) + goto fail; + break; + case A_X0: + if (user->type != DSP_REG_N || user->reg != A_X0_NUM) + goto fail; + break; + case A_X1: + if (user->type != DSP_REG_N || user->reg != A_X1_NUM) + goto fail; + break; + case A_Y0: + if (user->type != DSP_REG_N || user->reg != A_Y0_NUM) + goto fail; + break; + case A_Y1: + if (user->type != DSP_REG_N || user->reg != A_Y1_NUM) + goto fail; + break; + + case F_REG_M: + case D_REG_M: + case X_REG_M: + case V_REG_M: + case FPUL_M: + case FPSCR_M: + /* Opcode needs rn */ + if (user->type != arg - F_REG_M + F_REG_N) + goto fail; + reg_m = user->reg; + break; + case DX_REG_M: + if (user->type != D_REG_N && user->type != X_REG_N) + goto fail; + reg_m = user->reg; + break; + case XMTRX_M4: + if (user->type != XMTRX_M4) + goto fail; + reg_m = 4; + break; + + default: + printf (_("unhandled %d\n"), arg); + goto fail; + } + } + if ( !(valid_arch & this_try->arch)) + goto fail; + valid_arch &= this_try->arch; + return this_try; + fail: + ; + } + + return 0; +} + +static void +insert (where, how, pcrel, op) + char *where; + int how; + int pcrel; + sh_operand_info *op; +{ + fix_new_exp (frag_now, + where - frag_now->fr_literal, + 2, + &op->immediate, + pcrel, + how); +} + +static void +build_relax (opcode, op) + sh_opcode_info *opcode; + sh_operand_info *op; +{ + int high_byte = target_big_endian ? 0 : 1; + char *p; + + if (opcode->arg[0] == A_BDISP8) + { + int what = (opcode->nibbles[1] & 4) ? COND_JUMP_DELAY : COND_JUMP; + p = frag_var (rs_machine_dependent, + md_relax_table[C (what, COND32)].rlx_length, + md_relax_table[C (what, COND8)].rlx_length, + C (what, 0), + op->immediate.X_add_symbol, + op->immediate.X_add_number, + 0); + p[high_byte] = (opcode->nibbles[0] << 4) | (opcode->nibbles[1]); + } + else if (opcode->arg[0] == A_BDISP12) + { + p = frag_var (rs_machine_dependent, + md_relax_table[C (UNCOND_JUMP, UNCOND32)].rlx_length, + md_relax_table[C (UNCOND_JUMP, UNCOND12)].rlx_length, + C (UNCOND_JUMP, 0), + op->immediate.X_add_symbol, + op->immediate.X_add_number, + 0); + p[high_byte] = (opcode->nibbles[0] << 4); + } + +} + +/* Insert ldrs & ldre with fancy relocations that relaxation can recognize. */ + +static char * +insert_loop_bounds (output, operand) + char *output; + sh_operand_info *operand; +{ + char *name; + symbolS *end_sym; + + /* Since the low byte of the opcode will be overwritten by the reloc, we + can just stash the high byte into both bytes and ignore endianness. */ + output[0] = 0x8c; + output[1] = 0x8c; + insert (output, BFD_RELOC_SH_LOOP_START, 1, operand); + insert (output, BFD_RELOC_SH_LOOP_END, 1, operand + 1); + + if (sh_relax) + { + static int count = 0; + + /* If the last loop insn is a two-byte-insn, it is in danger of being + swapped with the insn after it. To prevent this, create a new + symbol - complete with SH_LABEL reloc - after the last loop insn. + If the last loop insn is four bytes long, the symbol will be + right in the middle, but four byte insns are not swapped anyways. */ + /* A REPEAT takes 6 bytes. The SH has a 32 bit address space. + Hence a 9 digit number should be enough to count all REPEATs. */ + name = alloca (11); + sprintf (name, "_R%x", count++ & 0x3fffffff); + end_sym = symbol_new (name, undefined_section, 0, &zero_address_frag); + /* Make this a local symbol. */ +#ifdef OBJ_COFF + SF_SET_LOCAL (end_sym); +#endif /* OBJ_COFF */ + symbol_table_insert (end_sym); + end_sym->sy_value = operand[1].immediate; + end_sym->sy_value.X_add_number += 2; + fix_new (frag_now, frag_now_fix (), 2, end_sym, 0, 1, BFD_RELOC_SH_LABEL); + } + + output = frag_more (2); + output[0] = 0x8e; + output[1] = 0x8e; + insert (output, BFD_RELOC_SH_LOOP_START, 1, operand); + insert (output, BFD_RELOC_SH_LOOP_END, 1, operand + 1); + + return frag_more (2); +} + +/* Now we know what sort of opcodes it is, let's build the bytes. */ + +static unsigned int +build_Mytes (opcode, operand) + sh_opcode_info *opcode; + sh_operand_info *operand; +{ + int index; + char nbuf[4]; + char *output = frag_more (2); + unsigned int size = 2; + int low_byte = target_big_endian ? 1 : 0; + nbuf[0] = 0; + nbuf[1] = 0; + nbuf[2] = 0; + nbuf[3] = 0; + + for (index = 0; index < 4; index++) + { + sh_nibble_type i = opcode->nibbles[index]; + if (i < 16) + { + nbuf[index] = i; + } + else + { + switch (i) + { + case REG_N: + nbuf[index] = reg_n; + break; + case REG_M: + nbuf[index] = reg_m; + break; + case SDT_REG_N: + if (reg_n < 2 || reg_n > 5) + as_bad (_("Invalid register: 'r%d'"), reg_n); + nbuf[index] = (reg_n & 3) | 4; + break; + case REG_NM: + nbuf[index] = reg_n | (reg_m >> 2); + break; + case REG_B: + nbuf[index] = reg_b | 0x08; + break; + case IMM0_4BY4: + insert (output + low_byte, BFD_RELOC_SH_IMM4BY4, 0, operand); + break; + case IMM0_4BY2: + insert (output + low_byte, BFD_RELOC_SH_IMM4BY2, 0, operand); + break; + case IMM0_4: + insert (output + low_byte, BFD_RELOC_SH_IMM4, 0, operand); + break; + case IMM1_4BY4: + insert (output + low_byte, BFD_RELOC_SH_IMM4BY4, 0, operand + 1); + break; + case IMM1_4BY2: + insert (output + low_byte, BFD_RELOC_SH_IMM4BY2, 0, operand + 1); + break; + case IMM1_4: + insert (output + low_byte, BFD_RELOC_SH_IMM4, 0, operand + 1); + break; + case IMM0_8BY4: + insert (output + low_byte, BFD_RELOC_SH_IMM8BY4, 0, operand); + break; + case IMM0_8BY2: + insert (output + low_byte, BFD_RELOC_SH_IMM8BY2, 0, operand); + break; + case IMM0_8: + insert (output + low_byte, BFD_RELOC_SH_IMM8, 0, operand); + break; + case IMM1_8BY4: + insert (output + low_byte, BFD_RELOC_SH_IMM8BY4, 0, operand + 1); + break; + case IMM1_8BY2: + insert (output + low_byte, BFD_RELOC_SH_IMM8BY2, 0, operand + 1); + break; + case IMM1_8: + insert (output + low_byte, BFD_RELOC_SH_IMM8, 0, operand + 1); + break; + case PCRELIMM_8BY4: + insert (output, BFD_RELOC_SH_PCRELIMM8BY4, + operand->type != A_DISP_PC_ABS, operand); + break; + case PCRELIMM_8BY2: + insert (output, BFD_RELOC_SH_PCRELIMM8BY2, + operand->type != A_DISP_PC_ABS, operand); + break; + case REPEAT: + output = insert_loop_bounds (output, operand); + nbuf[index] = opcode->nibbles[3]; + operand += 2; + break; + default: + printf (_("failed for %d\n"), i); + } + } + } + if (!target_big_endian) + { + output[1] = (nbuf[0] << 4) | (nbuf[1]); + output[0] = (nbuf[2] << 4) | (nbuf[3]); + } + else + { + output[0] = (nbuf[0] << 4) | (nbuf[1]); + output[1] = (nbuf[2] << 4) | (nbuf[3]); + } + return size; +} + +/* Find an opcode at the start of *STR_P in the hash table, and set + *STR_P to the first character after the last one read. */ + +static sh_opcode_info * +find_cooked_opcode (str_p) + char **str_p; +{ + char *str = *str_p; + unsigned char *op_start; + unsigned char *op_end; + char name[20]; + int nlen = 0; + + /* Drop leading whitespace. */ + while (*str == ' ') + str++; + + /* Find the op code end. + The pre-processor will eliminate whitespace in front of + any '@' after the first argument; we may be called from + assemble_ppi, so the opcode might be terminated by an '@'. */ + for (op_start = op_end = (unsigned char *) (str); + *op_end + && nlen < 20 + && !is_end_of_line[*op_end] && *op_end != ' ' && *op_end != '@'; + op_end++) + { + unsigned char c = op_start[nlen]; + + /* The machine independent code will convert CMP/EQ into cmp/EQ + because it thinks the '/' is the end of the symbol. Moreover, + all but the first sub-insn is a parallel processing insn won't + be capitalized. Instead of hacking up the machine independent + code, we just deal with it here. */ + c = TOLOWER (c); + name[nlen] = c; + nlen++; + } + + name[nlen] = 0; + *str_p = op_end; + + if (nlen == 0) + as_bad (_("can't find opcode ")); + + return (sh_opcode_info *) hash_find (opcode_hash_control, name); +} + +/* Assemble a parallel processing insn. */ +#define DDT_BASE 0xf000 /* Base value for double data transfer insns */ + +static unsigned int +assemble_ppi (op_end, opcode) + char *op_end; + sh_opcode_info *opcode; +{ + int movx = 0; + int movy = 0; + int cond = 0; + int field_b = 0; + char *output; + int move_code; + unsigned int size; + + for (;;) + { + sh_operand_info operand[3]; + + /* Some insn ignore one or more register fields, e.g. psts machl,a0. + Make sure we encode a defined insn pattern. */ + reg_x = 0; + reg_y = 0; + reg_n = 0; + + if (opcode->arg[0] != A_END) + op_end = get_operands (opcode, op_end, operand); + opcode = get_specific (opcode, operand); + if (opcode == 0) + { + /* Couldn't find an opcode which matched the operands. */ + char *where = frag_more (2); + size = 2; + + where[0] = 0x0; + where[1] = 0x0; + as_bad (_("invalid operands for opcode")); + return size; + } + + if (opcode->nibbles[0] != PPI) + as_bad (_("insn can't be combined with parallel processing insn")); + + switch (opcode->nibbles[1]) + { + + case NOPX: + if (movx) + as_bad (_("multiple movx specifications")); + movx = DDT_BASE; + break; + case NOPY: + if (movy) + as_bad (_("multiple movy specifications")); + movy = DDT_BASE; + break; + + case MOVX: + if (movx) + as_bad (_("multiple movx specifications")); + if (reg_n < 4 || reg_n > 5) + as_bad (_("invalid movx address register")); + if (opcode->nibbles[2] & 8) + { + if (reg_m == A_A1_NUM) + movx = 1 << 7; + else if (reg_m != A_A0_NUM) + as_bad (_("invalid movx dsp register")); + } + else + { + if (reg_x > 1) + as_bad (_("invalid movx dsp register")); + movx = reg_x << 7; + } + movx += ((reg_n - 4) << 9) + (opcode->nibbles[2] << 2) + DDT_BASE; + break; + + case MOVY: + if (movy) + as_bad (_("multiple movy specifications")); + if (opcode->nibbles[2] & 8) + { + /* Bit 3 in nibbles[2] is intended for bit 4 of the opcode, + so add 8 more. */ + movy = 8; + if (reg_m == A_A1_NUM) + movy += 1 << 6; + else if (reg_m != A_A0_NUM) + as_bad (_("invalid movy dsp register")); + } + else + { + if (reg_y > 1) + as_bad (_("invalid movy dsp register")); + movy = reg_y << 6; + } + if (reg_n < 6 || reg_n > 7) + as_bad (_("invalid movy address register")); + movy += ((reg_n - 6) << 8) + opcode->nibbles[2] + DDT_BASE; + break; + + case PSH: + if (operand[0].immediate.X_op != O_constant) + as_bad (_("dsp immediate shift value not constant")); + field_b = ((opcode->nibbles[2] << 12) + | (operand[0].immediate.X_add_number & 127) << 4 + | reg_n); + break; + case PPI3: + if (field_b) + as_bad (_("multiple parallel processing specifications")); + field_b = ((opcode->nibbles[2] << 12) + (opcode->nibbles[3] << 8) + + (reg_x << 6) + (reg_y << 4) + reg_n); + break; + case PDC: + if (cond) + as_bad (_("multiple condition specifications")); + cond = opcode->nibbles[2] << 8; + if (*op_end) + goto skip_cond_check; + break; + case PPIC: + if (field_b) + as_bad (_("multiple parallel processing specifications")); + field_b = ((opcode->nibbles[2] << 12) + (opcode->nibbles[3] << 8) + + cond + (reg_x << 6) + (reg_y << 4) + reg_n); + cond = 0; + break; + case PMUL: + if (field_b) + { + if ((field_b & 0xef00) != 0xa100) + as_bad (_("insn cannot be combined with pmuls")); + field_b -= 0x8100; + switch (field_b & 0xf) + { + case A_X0_NUM: + field_b += 0 - A_X0_NUM; + break; + case A_Y0_NUM: + field_b += 1 - A_Y0_NUM; + break; + case A_A0_NUM: + field_b += 2 - A_A0_NUM; + break; + case A_A1_NUM: + field_b += 3 - A_A1_NUM; + break; + default: + as_bad (_("bad padd / psub pmuls output operand")); + } + /* Generate warning if the destination register for padd / psub + and pmuls is the same ( only for A0 or A1 ). + If the last nibble is 1010 then A0 is used in both + padd / psub and pmuls. If it is 1111 then A1 is used + as destination register in both padd / psub and pmuls. */ + + if ((((field_b | reg_efg) & 0x000F) == 0x000A) + || (((field_b | reg_efg) & 0x000F) == 0x000F)) + as_warn (_("destination register is same for parallel insns")); + } + field_b += 0x4000 + reg_efg; + break; + default: + abort (); + } + if (cond) + { + as_bad (_("condition not followed by conditionalizable insn")); + cond = 0; + } + if (! *op_end) + break; + skip_cond_check: + opcode = find_cooked_opcode (&op_end); + if (opcode == NULL) + { + (as_bad + (_("unrecognized characters at end of parallel processing insn"))); + break; + } + } + + move_code = movx | movy; + if (field_b) + { + /* Parallel processing insn. */ + unsigned long ppi_code = (movx | movy | 0xf800) << 16 | field_b; + + output = frag_more (4); + size = 4; + if (! target_big_endian) + { + output[3] = ppi_code >> 8; + output[2] = ppi_code; + } + else + { + output[2] = ppi_code >> 8; + output[3] = ppi_code; + } + move_code |= 0xf800; + } + else + { + /* Just a double data transfer. */ + output = frag_more (2); + size = 2; + } + if (! target_big_endian) + { + output[1] = move_code >> 8; + output[0] = move_code; + } + else + { + output[0] = move_code >> 8; + output[1] = move_code; + } + return size; +} + +/* This is the guts of the machine-dependent assembler. STR points to a + machine dependent instruction. This function is supposed to emit + the frags/bytes it assembles to. */ + +void +md_assemble (str) + char *str; +{ + unsigned char *op_end; + sh_operand_info operand[3]; + sh_opcode_info *opcode; + unsigned int size = 0; + +#ifdef HAVE_SH64 + if (sh64_isa_mode == sh64_isa_shmedia) + { + shmedia_md_assemble (str); + return; + } + else + { + /* If we've seen pseudo-directives, make sure any emitted data or + frags are marked as data. */ + if (seen_insn == false) + { + sh64_update_contents_mark (true); + sh64_set_contents_type (CRT_SH5_ISA16); + } + + seen_insn = true; + } +#endif /* HAVE_SH64 */ + + opcode = find_cooked_opcode (&str); + op_end = str; + + if (opcode == NULL) + { + as_bad (_("unknown opcode")); + return; + } + + if (sh_relax + && ! seg_info (now_seg)->tc_segment_info_data.in_code) + { + /* Output a CODE reloc to tell the linker that the following + bytes are instructions, not data. */ + fix_new (frag_now, frag_now_fix (), 2, &abs_symbol, 0, 0, + BFD_RELOC_SH_CODE); + seg_info (now_seg)->tc_segment_info_data.in_code = 1; + } + + if (opcode->nibbles[0] == PPI) + { + size = assemble_ppi (op_end, opcode); + } + else + { + if (opcode->arg[0] == A_BDISP12 + || opcode->arg[0] == A_BDISP8) + { + parse_exp (op_end + 1, &operand[0]); + build_relax (opcode, &operand[0]); + } + else + { + if (opcode->arg[0] == A_END) + { + /* Ignore trailing whitespace. If there is any, it has already + been compressed to a single space. */ + if (*op_end == ' ') + op_end++; + } + else + { + op_end = get_operands (opcode, op_end, operand); + } + opcode = get_specific (opcode, operand); + + if (opcode == 0) + { + /* Couldn't find an opcode which matched the operands. */ + char *where = frag_more (2); + size = 2; + + where[0] = 0x0; + where[1] = 0x0; + as_bad (_("invalid operands for opcode")); + } + else + { + if (*op_end) + as_bad (_("excess operands: '%s'"), op_end); + + size = build_Mytes (opcode, operand); + } + } + } + +#ifdef BFD_ASSEMBLER + dwarf2_emit_insn (size); +#endif +} + +/* This routine is called each time a label definition is seen. It + emits a BFD_RELOC_SH_LABEL reloc if necessary. */ + +void +sh_frob_label () +{ + static fragS *last_label_frag; + static int last_label_offset; + + if (sh_relax + && seg_info (now_seg)->tc_segment_info_data.in_code) + { + int offset; + + offset = frag_now_fix (); + if (frag_now != last_label_frag + || offset != last_label_offset) + { + fix_new (frag_now, offset, 2, &abs_symbol, 0, 0, BFD_RELOC_SH_LABEL); + last_label_frag = frag_now; + last_label_offset = offset; + } + } +} + +/* This routine is called when the assembler is about to output some + data. It emits a BFD_RELOC_SH_DATA reloc if necessary. */ + +void +sh_flush_pending_output () +{ + if (sh_relax + && seg_info (now_seg)->tc_segment_info_data.in_code) + { + fix_new (frag_now, frag_now_fix (), 2, &abs_symbol, 0, 0, + BFD_RELOC_SH_DATA); + seg_info (now_seg)->tc_segment_info_data.in_code = 0; + } +} + +symbolS * +md_undefined_symbol (name) + char *name ATTRIBUTE_UNUSED; +{ + return 0; +} + +#ifdef OBJ_COFF +#ifndef BFD_ASSEMBLER + +void +tc_crawl_symbol_chain (headers) + object_headers *headers ATTRIBUTE_UNUSED; +{ + printf (_("call to tc_crawl_symbol_chain \n")); +} + +void +tc_headers_hook (headers) + object_headers *headers ATTRIBUTE_UNUSED; +{ + printf (_("call to tc_headers_hook \n")); +} + +#endif +#endif + +/* Various routines to kill one day. */ +/* Equal to MAX_PRECISION in atof-ieee.c. */ +#define MAX_LITTLENUMS 6 + +/* Turn a string in input_line_pointer into a floating point constant + of type TYPE, and store the appropriate bytes in *LITP. The number + of LITTLENUMS emitted is stored in *SIZEP . An error message is + returned, or NULL on OK. */ + +char * +md_atof (type, litP, sizeP) + int type; + char *litP; + int *sizeP; +{ + int prec; + LITTLENUM_TYPE words[4]; + char *t; + int i; + + switch (type) + { + case 'f': + prec = 2; + break; + + case 'd': + prec = 4; + break; + + default: + *sizeP = 0; + return _("bad call to md_atof"); + } + + t = atof_ieee (input_line_pointer, type, words); + if (t) + input_line_pointer = t; + + *sizeP = prec * 2; + + if (! target_big_endian) + { + for (i = prec - 1; i >= 0; i--) + { + md_number_to_chars (litP, (valueT) words[i], 2); + litP += 2; + } + } + else + { + for (i = 0; i < prec; i++) + { + md_number_to_chars (litP, (valueT) words[i], 2); + litP += 2; + } + } + + return NULL; +} + +/* Handle the .uses pseudo-op. This pseudo-op is used just before a + call instruction. It refers to a label of the instruction which + loads the register which the call uses. We use it to generate a + special reloc for the linker. */ + +static void +s_uses (ignore) + int ignore ATTRIBUTE_UNUSED; +{ + expressionS ex; + + if (! sh_relax) + as_warn (_(".uses pseudo-op seen when not relaxing")); + + expression (&ex); + + if (ex.X_op != O_symbol || ex.X_add_number != 0) + { + as_bad (_("bad .uses format")); + ignore_rest_of_line (); + return; + } + + fix_new_exp (frag_now, frag_now_fix (), 2, &ex, 1, BFD_RELOC_SH_USES); + + demand_empty_rest_of_line (); +} + +const char *md_shortopts = ""; +struct option md_longopts[] = +{ +#define OPTION_RELAX (OPTION_MD_BASE) +#define OPTION_BIG (OPTION_MD_BASE + 1) +#define OPTION_LITTLE (OPTION_BIG + 1) +#define OPTION_SMALL (OPTION_LITTLE + 1) +#define OPTION_DSP (OPTION_SMALL + 1) + + {"relax", no_argument, NULL, OPTION_RELAX}, + {"big", no_argument, NULL, OPTION_BIG}, + {"little", no_argument, NULL, OPTION_LITTLE}, + {"small", no_argument, NULL, OPTION_SMALL}, + {"dsp", no_argument, NULL, OPTION_DSP}, +#ifdef HAVE_SH64 +#define OPTION_ISA (OPTION_DSP + 1) +#define OPTION_ABI (OPTION_ISA + 1) +#define OPTION_NO_MIX (OPTION_ABI + 1) +#define OPTION_SHCOMPACT_CONST_CRANGE (OPTION_NO_MIX + 1) +#define OPTION_NO_EXPAND (OPTION_SHCOMPACT_CONST_CRANGE + 1) +#define OPTION_PT32 (OPTION_NO_EXPAND + 1) + {"isa", required_argument, NULL, OPTION_ISA}, + {"abi", required_argument, NULL, OPTION_ABI}, + {"no-mix", no_argument, NULL, OPTION_NO_MIX}, + {"shcompact-const-crange", no_argument, NULL, OPTION_SHCOMPACT_CONST_CRANGE}, + {"no-expand", no_argument, NULL, OPTION_NO_EXPAND}, + {"expand-pt32", no_argument, NULL, OPTION_PT32}, +#endif /* HAVE_SH64 */ + + {NULL, no_argument, NULL, 0} +}; +size_t md_longopts_size = sizeof (md_longopts); + +int +md_parse_option (c, arg) + int c; + char *arg ATTRIBUTE_UNUSED; +{ + switch (c) + { + case OPTION_RELAX: + sh_relax = 1; + break; + + case OPTION_BIG: + target_big_endian = 1; + break; + + case OPTION_LITTLE: + target_big_endian = 0; + break; + + case OPTION_SMALL: + sh_small = 1; + break; + + case OPTION_DSP: + sh_dsp = 1; + break; + +#ifdef HAVE_SH64 + case OPTION_ISA: + if (strcasecmp (arg, "shmedia") == 0) + { + if (sh64_isa_mode == sh64_isa_shcompact) + as_bad (_("Invalid combination: --isa=SHcompact with --isa=SHmedia")); + sh64_isa_mode = sh64_isa_shmedia; + } + else if (strcasecmp (arg, "shcompact") == 0) + { + if (sh64_isa_mode == sh64_isa_shmedia) + as_bad (_("Invalid combination: --isa=SHmedia with --isa=SHcompact")); + if (sh64_abi == sh64_abi_64) + as_bad (_("Invalid combination: --abi=64 with --isa=SHcompact")); + sh64_isa_mode = sh64_isa_shcompact; + } + else + as_bad ("Invalid argument to --isa option: %s", arg); + break; + + case OPTION_ABI: + if (strcmp (arg, "32") == 0) + { + if (sh64_abi == sh64_abi_64) + as_bad (_("Invalid combination: --abi=32 with --abi=64")); + sh64_abi = sh64_abi_32; + } + else if (strcmp (arg, "64") == 0) + { + if (sh64_abi == sh64_abi_32) + as_bad (_("Invalid combination: --abi=64 with --abi=32")); + if (sh64_isa_mode == sh64_isa_shcompact) + as_bad (_("Invalid combination: --isa=SHcompact with --abi=64")); + sh64_abi = sh64_abi_64; + } + else + as_bad ("Invalid argument to --abi option: %s", arg); + break; + + case OPTION_NO_MIX: + sh64_mix = false; + break; + + case OPTION_SHCOMPACT_CONST_CRANGE: + sh64_shcompact_const_crange = true; + break; + + case OPTION_NO_EXPAND: + sh64_expand = false; + break; + + case OPTION_PT32: + sh64_pt32 = true; + break; +#endif /* HAVE_SH64 */ + + default: + return 0; + } + + return 1; +} + +void +md_show_usage (stream) + FILE *stream; +{ + fprintf (stream, _("\ +SH options:\n\ +-little generate little endian code\n\ +-big generate big endian code\n\ +-relax alter jump instructions for long displacements\n\ +-small align sections to 4 byte boundaries, not 16\n\ +-dsp enable sh-dsp insns, and disable sh3e / sh4 insns.\n")); +#ifdef HAVE_SH64 + fprintf (stream, _("\ +-isa=[shmedia set default instruction set for SH64\n\ + | SHmedia\n\ + | shcompact\n\ + | SHcompact]\n\ +-abi=[32|64] set size of expanded SHmedia operands and object\n\ + file type\n\ +-shcompact-const-crange emit code-range descriptors for constants in\n\ + SHcompact code sections\n\ +-no-mix disallow SHmedia code in the same section as\n\ + constants and SHcompact code\n\ +-no-expand do not expand MOVI, PT, PTA or PTB instructions\n\ +-expand-pt32 with -abi=64, expand PT, PTA and PTB instructions\n\ + to 32 bits only")); +#endif /* HAVE_SH64 */ +} + +/* This struct is used to pass arguments to sh_count_relocs through + bfd_map_over_sections. */ + +struct sh_count_relocs +{ + /* Symbol we are looking for. */ + symbolS *sym; + /* Count of relocs found. */ + int count; +}; + +/* Count the number of fixups in a section which refer to a particular + symbol. When using BFD_ASSEMBLER, this is called via + bfd_map_over_sections. */ + +static void +sh_count_relocs (abfd, sec, data) + bfd *abfd ATTRIBUTE_UNUSED; + segT sec; + PTR data; +{ + struct sh_count_relocs *info = (struct sh_count_relocs *) data; + segment_info_type *seginfo; + symbolS *sym; + fixS *fix; + + seginfo = seg_info (sec); + if (seginfo == NULL) + return; + + sym = info->sym; + for (fix = seginfo->fix_root; fix != NULL; fix = fix->fx_next) + { + if (fix->fx_addsy == sym) + { + ++info->count; + fix->fx_tcbit = 1; + } + } +} + +/* Handle the count relocs for a particular section. When using + BFD_ASSEMBLER, this is called via bfd_map_over_sections. */ + +static void +sh_frob_section (abfd, sec, ignore) + bfd *abfd ATTRIBUTE_UNUSED; + segT sec; + PTR ignore ATTRIBUTE_UNUSED; +{ + segment_info_type *seginfo; + fixS *fix; + + seginfo = seg_info (sec); + if (seginfo == NULL) + return; + + for (fix = seginfo->fix_root; fix != NULL; fix = fix->fx_next) + { + symbolS *sym; + bfd_vma val; + fixS *fscan; + struct sh_count_relocs info; + + if (fix->fx_r_type != BFD_RELOC_SH_USES) + continue; + + /* The BFD_RELOC_SH_USES reloc should refer to a defined local + symbol in the same section. */ + sym = fix->fx_addsy; + if (sym == NULL + || fix->fx_subsy != NULL + || fix->fx_addnumber != 0 + || S_GET_SEGMENT (sym) != sec +#if ! defined (BFD_ASSEMBLER) && defined (OBJ_COFF) + || S_GET_STORAGE_CLASS (sym) == C_EXT +#endif + || S_IS_EXTERNAL (sym)) + { + as_warn_where (fix->fx_file, fix->fx_line, + _(".uses does not refer to a local symbol in the same section")); + continue; + } + + /* Look through the fixups again, this time looking for one + at the same location as sym. */ + val = S_GET_VALUE (sym); + for (fscan = seginfo->fix_root; + fscan != NULL; + fscan = fscan->fx_next) + if (val == fscan->fx_frag->fr_address + fscan->fx_where + && fscan->fx_r_type != BFD_RELOC_SH_ALIGN + && fscan->fx_r_type != BFD_RELOC_SH_CODE + && fscan->fx_r_type != BFD_RELOC_SH_DATA + && fscan->fx_r_type != BFD_RELOC_SH_LABEL) + break; + if (fscan == NULL) + { + as_warn_where (fix->fx_file, fix->fx_line, + _("can't find fixup pointed to by .uses")); + continue; + } + + if (fscan->fx_tcbit) + { + /* We've already done this one. */ + continue; + } + + /* The variable fscan should also be a fixup to a local symbol + in the same section. */ + sym = fscan->fx_addsy; + if (sym == NULL + || fscan->fx_subsy != NULL + || fscan->fx_addnumber != 0 + || S_GET_SEGMENT (sym) != sec +#if ! defined (BFD_ASSEMBLER) && defined (OBJ_COFF) + || S_GET_STORAGE_CLASS (sym) == C_EXT +#endif + || S_IS_EXTERNAL (sym)) + { + as_warn_where (fix->fx_file, fix->fx_line, + _(".uses target does not refer to a local symbol in the same section")); + continue; + } + + /* Now we look through all the fixups of all the sections, + counting the number of times we find a reference to sym. */ + info.sym = sym; + info.count = 0; +#ifdef BFD_ASSEMBLER + bfd_map_over_sections (stdoutput, sh_count_relocs, (PTR) &info); +#else + { + int iscan; + + for (iscan = SEG_E0; iscan < SEG_UNKNOWN; iscan++) + sh_count_relocs ((bfd *) NULL, iscan, (PTR) &info); + } +#endif + + if (info.count < 1) + abort (); + + /* Generate a BFD_RELOC_SH_COUNT fixup at the location of sym. + We have already adjusted the value of sym to include the + fragment address, so we undo that adjustment here. */ + subseg_change (sec, 0); + fix_new (fscan->fx_frag, + S_GET_VALUE (sym) - fscan->fx_frag->fr_address, + 4, &abs_symbol, info.count, 0, BFD_RELOC_SH_COUNT); + } +} + +/* This function is called after the symbol table has been completed, + but before the relocs or section contents have been written out. + If we have seen any .uses pseudo-ops, they point to an instruction + which loads a register with the address of a function. We look + through the fixups to find where the function address is being + loaded from. We then generate a COUNT reloc giving the number of + times that function address is referred to. The linker uses this + information when doing relaxing, to decide when it can eliminate + the stored function address entirely. */ + +void +sh_frob_file () +{ +#ifdef HAVE_SH64 + shmedia_frob_file_before_adjust (); +#endif + + if (! sh_relax) + return; + +#ifdef BFD_ASSEMBLER + bfd_map_over_sections (stdoutput, sh_frob_section, (PTR) NULL); +#else + { + int iseg; + + for (iseg = SEG_E0; iseg < SEG_UNKNOWN; iseg++) + sh_frob_section ((bfd *) NULL, iseg, (PTR) NULL); + } +#endif +} + +/* Called after relaxing. Set the correct sizes of the fragments, and + create relocs so that md_apply_fix3 will fill in the correct values. */ + +void +md_convert_frag (headers, seg, fragP) +#ifdef BFD_ASSEMBLER + bfd *headers ATTRIBUTE_UNUSED; +#else + object_headers *headers ATTRIBUTE_UNUSED; +#endif + segT seg; + fragS *fragP; +{ + int donerelax = 0; + + switch (fragP->fr_subtype) + { + case C (COND_JUMP, COND8): + case C (COND_JUMP_DELAY, COND8): + subseg_change (seg, 0); + fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset, + 1, BFD_RELOC_SH_PCDISP8BY2); + fragP->fr_fix += 2; + fragP->fr_var = 0; + break; + + case C (UNCOND_JUMP, UNCOND12): + subseg_change (seg, 0); + fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset, + 1, BFD_RELOC_SH_PCDISP12BY2); + fragP->fr_fix += 2; + fragP->fr_var = 0; + break; + + case C (UNCOND_JUMP, UNCOND32): + case C (UNCOND_JUMP, UNDEF_WORD_DISP): + if (fragP->fr_symbol == NULL) + as_bad_where (fragP->fr_file, fragP->fr_line, + _("displacement overflows 12-bit field")); + else if (S_IS_DEFINED (fragP->fr_symbol)) + as_bad_where (fragP->fr_file, fragP->fr_line, + _("displacement to defined symbol %s overflows 12-bit field"), + S_GET_NAME (fragP->fr_symbol)); + else + as_bad_where (fragP->fr_file, fragP->fr_line, + _("displacement to undefined symbol %s overflows 12-bit field"), + S_GET_NAME (fragP->fr_symbol)); + /* Stabilize this frag, so we don't trip an assert. */ + fragP->fr_fix += fragP->fr_var; + fragP->fr_var = 0; + break; + + case C (COND_JUMP, COND12): + case C (COND_JUMP_DELAY, COND12): + /* A bcond won't fit, so turn it into a b!cond; bra disp; nop. */ + /* I found that a relax failure for gcc.c-torture/execute/930628-1.c + was due to gas incorrectly relaxing an out-of-range conditional + branch with delay slot. It turned: + bf.s L6 (slot mov.l r12,@(44,r0)) + into: + +2c: 8f 01 a0 8b bf.s 32 <_main+32> (slot bra L6) +30: 00 09 nop +32: 10 cb mov.l r12,@(44,r0) + Therefore, branches with delay slots have to be handled + differently from ones without delay slots. */ + { + unsigned char *buffer = + (unsigned char *) (fragP->fr_fix + fragP->fr_literal); + int highbyte = target_big_endian ? 0 : 1; + int lowbyte = target_big_endian ? 1 : 0; + int delay = fragP->fr_subtype == C (COND_JUMP_DELAY, COND12); + + /* Toggle the true/false bit of the bcond. */ + buffer[highbyte] ^= 0x2; + + /* If this is a delayed branch, we may not put the bra in the + slot. So we change it to a non-delayed branch, like that: + b! cond slot_label; bra disp; slot_label: slot_insn + ??? We should try if swapping the conditional branch and + its delay-slot insn already makes the branch reach. */ + + /* Build a relocation to six / four bytes farther on. */ + subseg_change (seg, 0); + fix_new (fragP, fragP->fr_fix, 2, +#ifdef BFD_ASSEMBLER + section_symbol (seg), +#else + seg_info (seg)->dot, +#endif + fragP->fr_address + fragP->fr_fix + (delay ? 4 : 6), + 1, BFD_RELOC_SH_PCDISP8BY2); + + /* Set up a jump instruction. */ + buffer[highbyte + 2] = 0xa0; + buffer[lowbyte + 2] = 0; + fix_new (fragP, fragP->fr_fix + 2, 2, fragP->fr_symbol, + fragP->fr_offset, 1, BFD_RELOC_SH_PCDISP12BY2); + + if (delay) + { + buffer[highbyte] &= ~0x4; /* Removes delay slot from branch. */ + fragP->fr_fix += 4; + } + else + { + /* Fill in a NOP instruction. */ + buffer[highbyte + 4] = 0x0; + buffer[lowbyte + 4] = 0x9; + + fragP->fr_fix += 6; + } + fragP->fr_var = 0; + donerelax = 1; + } + break; + + case C (COND_JUMP, COND32): + case C (COND_JUMP_DELAY, COND32): + case C (COND_JUMP, UNDEF_WORD_DISP): + case C (COND_JUMP_DELAY, UNDEF_WORD_DISP): + if (fragP->fr_symbol == NULL) + as_bad_where (fragP->fr_file, fragP->fr_line, + _("displacement overflows 8-bit field")); + else if (S_IS_DEFINED (fragP->fr_symbol)) + as_bad_where (fragP->fr_file, fragP->fr_line, + _("displacement to defined symbol %s overflows 8-bit field"), + S_GET_NAME (fragP->fr_symbol)); + else + as_bad_where (fragP->fr_file, fragP->fr_line, + _("displacement to undefined symbol %s overflows 8-bit field "), + S_GET_NAME (fragP->fr_symbol)); + /* Stabilize this frag, so we don't trip an assert. */ + fragP->fr_fix += fragP->fr_var; + fragP->fr_var = 0; + break; + + default: +#ifdef HAVE_SH64 + shmedia_md_convert_frag (headers, seg, fragP, true); +#else + abort (); +#endif + } + + if (donerelax && !sh_relax) + as_warn_where (fragP->fr_file, fragP->fr_line, + _("overflow in branch to %s; converted into longer instruction sequence"), + (fragP->fr_symbol != NULL + ? S_GET_NAME (fragP->fr_symbol) + : "")); +} + +valueT +md_section_align (seg, size) + segT seg ATTRIBUTE_UNUSED; + valueT size; +{ +#ifdef BFD_ASSEMBLER +#ifdef OBJ_ELF + return size; +#else /* ! OBJ_ELF */ + return ((size + (1 << bfd_get_section_alignment (stdoutput, seg)) - 1) + & (-1 << bfd_get_section_alignment (stdoutput, seg))); +#endif /* ! OBJ_ELF */ +#else /* ! BFD_ASSEMBLER */ + return ((size + (1 << section_alignment[(int) seg]) - 1) + & (-1 << section_alignment[(int) seg])); +#endif /* ! BFD_ASSEMBLER */ +} + +/* This static variable is set by s_uacons to tell sh_cons_align that + the expession does not need to be aligned. */ + +static int sh_no_align_cons = 0; + +/* This handles the unaligned space allocation pseudo-ops, such as + .uaword. .uaword is just like .word, but the value does not need + to be aligned. */ + +static void +s_uacons (bytes) + int bytes; +{ + /* Tell sh_cons_align not to align this value. */ + sh_no_align_cons = 1; + cons (bytes); +} + +/* If a .word, et. al., pseud-op is seen, warn if the value is not + aligned correctly. Note that this can cause warnings to be issued + when assembling initialized structured which were declared with the + packed attribute. FIXME: Perhaps we should require an option to + enable this warning? */ + +void +sh_cons_align (nbytes) + int nbytes; +{ + int nalign; + char *p; + + if (sh_no_align_cons) + { + /* This is an unaligned pseudo-op. */ + sh_no_align_cons = 0; + return; + } + + nalign = 0; + while ((nbytes & 1) == 0) + { + ++nalign; + nbytes >>= 1; + } + + if (nalign == 0) + return; + + if (now_seg == absolute_section) + { + if ((abs_section_offset & ((1 << nalign) - 1)) != 0) + as_warn (_("misaligned data")); + return; + } + + p = frag_var (rs_align_test, 1, 1, (relax_substateT) 0, + (symbolS *) NULL, (offsetT) nalign, (char *) NULL); + + record_alignment (now_seg, nalign); +} + +/* When relaxing, we need to output a reloc for any .align directive + that requests alignment to a four byte boundary or larger. This is + also where we check for misaligned data. */ + +void +sh_handle_align (frag) + fragS *frag; +{ + int bytes = frag->fr_next->fr_address - frag->fr_address - frag->fr_fix; + + if (frag->fr_type == rs_align_code) + { + static const unsigned char big_nop_pattern[] = { 0x00, 0x09 }; + static const unsigned char little_nop_pattern[] = { 0x09, 0x00 }; + + char *p = frag->fr_literal + frag->fr_fix; + + if (bytes & 1) + { + *p++ = 0; + bytes--; + frag->fr_fix += 1; + } + + if (target_big_endian) + { + memcpy (p, big_nop_pattern, sizeof big_nop_pattern); + frag->fr_var = sizeof big_nop_pattern; + } + else + { + memcpy (p, little_nop_pattern, sizeof little_nop_pattern); + frag->fr_var = sizeof little_nop_pattern; + } + } + else if (frag->fr_type == rs_align_test) + { + if (bytes != 0) + as_warn_where (frag->fr_file, frag->fr_line, _("misaligned data")); + } + + if (sh_relax + && (frag->fr_type == rs_align + || frag->fr_type == rs_align_code) + && frag->fr_address + frag->fr_fix > 0 + && frag->fr_offset > 1 + && now_seg != bss_section) + fix_new (frag, frag->fr_fix, 2, &abs_symbol, frag->fr_offset, 0, + BFD_RELOC_SH_ALIGN); +} + +/* This macro decides whether a particular reloc is an entry in a + switch table. It is used when relaxing, because the linker needs + to know about all such entries so that it can adjust them if + necessary. */ + +#ifdef BFD_ASSEMBLER +#define SWITCH_TABLE_CONS(fix) (0) +#else +#define SWITCH_TABLE_CONS(fix) \ + ((fix)->fx_r_type == 0 \ + && ((fix)->fx_size == 2 \ + || (fix)->fx_size == 1 \ + || (fix)->fx_size == 4)) +#endif + +#define SWITCH_TABLE(fix) \ + ((fix)->fx_addsy != NULL \ + && (fix)->fx_subsy != NULL \ + && S_GET_SEGMENT ((fix)->fx_addsy) == text_section \ + && S_GET_SEGMENT ((fix)->fx_subsy) == text_section \ + && ((fix)->fx_r_type == BFD_RELOC_32 \ + || (fix)->fx_r_type == BFD_RELOC_16 \ + || (fix)->fx_r_type == BFD_RELOC_8 \ + || SWITCH_TABLE_CONS (fix))) + +/* See whether we need to force a relocation into the output file. + This is used to force out switch and PC relative relocations when + relaxing. */ + +int +sh_force_relocation (fix) + fixS *fix; +{ + + if (fix->fx_r_type == BFD_RELOC_VTABLE_INHERIT + || fix->fx_r_type == BFD_RELOC_VTABLE_ENTRY + || fix->fx_r_type == BFD_RELOC_SH_LOOP_START + || fix->fx_r_type == BFD_RELOC_SH_LOOP_END) + return 1; + + if (! sh_relax) + return 0; + + return (fix->fx_pcrel + || SWITCH_TABLE (fix) + || fix->fx_r_type == BFD_RELOC_SH_COUNT + || fix->fx_r_type == BFD_RELOC_SH_ALIGN + || fix->fx_r_type == BFD_RELOC_SH_CODE + || fix->fx_r_type == BFD_RELOC_SH_DATA +#ifdef HAVE_SH64 + || fix->fx_r_type == BFD_RELOC_SH_SHMEDIA_CODE +#endif + || fix->fx_r_type == BFD_RELOC_SH_LABEL); +} + +#ifdef OBJ_ELF +boolean +sh_fix_adjustable (fixP) + fixS *fixP; +{ + + if (fixP->fx_addsy == NULL) + return 1; + + if (fixP->fx_r_type == BFD_RELOC_SH_PCDISP8BY2 + || fixP->fx_r_type == BFD_RELOC_SH_PCDISP12BY2 + || fixP->fx_r_type == BFD_RELOC_SH_PCRELIMM8BY2 + || fixP->fx_r_type == BFD_RELOC_SH_PCRELIMM8BY4 + || fixP->fx_r_type == BFD_RELOC_8_PCREL + || fixP->fx_r_type == BFD_RELOC_SH_SWITCH16 + || fixP->fx_r_type == BFD_RELOC_SH_SWITCH32) + return 1; + + if (! TC_RELOC_RTSYM_LOC_FIXUP (fixP) + || fixP->fx_r_type == BFD_RELOC_RVA) + return 0; + + /* We need the symbol name for the VTABLE entries */ + if (fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT + || fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY) + return 0; + + return 1; +} + +void +sh_elf_final_processing () +{ + int val; + + /* Set file-specific flags to indicate if this code needs + a processor with the sh-dsp / sh3e ISA to execute. */ +#ifdef HAVE_SH64 + /* SH5 and above don't know about the valid_arch arch_sh* bits defined + in sh-opc.h, so check SH64 mode before checking valid_arch. */ + if (sh64_isa_mode != sh64_isa_unspecified) + val = EF_SH5; + else +#endif /* HAVE_SH64 */ + if (valid_arch & arch_sh1) + val = EF_SH1; + else if (valid_arch & arch_sh2) + val = EF_SH2; + else if (valid_arch & arch_sh_dsp) + val = EF_SH_DSP; + else if (valid_arch & arch_sh3) + val = EF_SH3; + else if (valid_arch & arch_sh3_dsp) + val = EF_SH_DSP; + else if (valid_arch & arch_sh3e) + val = EF_SH3E; + else if (valid_arch & arch_sh4) + val = EF_SH4; + else + abort (); + + elf_elfheader (stdoutput)->e_flags &= ~EF_SH_MACH_MASK; + elf_elfheader (stdoutput)->e_flags |= val; +} +#endif + +/* Apply a fixup to the object file. */ + +void +md_apply_fix3 (fixP, valP, seg) + fixS * fixP; + valueT * valP; + segT seg ATTRIBUTE_UNUSED; +{ + char *buf = fixP->fx_where + fixP->fx_frag->fr_literal; + int lowbyte = target_big_endian ? 1 : 0; + int highbyte = target_big_endian ? 0 : 1; + long val = (long) *valP; + long max, min; + int shift; + +#ifdef BFD_ASSEMBLER + /* A difference between two symbols, the second of which is in the + current section, is transformed in a PC-relative relocation to + the other symbol. We have to adjust the relocation type here. */ + if (fixP->fx_pcrel) + { + switch (fixP->fx_r_type) + { + default: + break; + + case BFD_RELOC_32: + fixP->fx_r_type = BFD_RELOC_32_PCREL; + break; + + /* Currently, we only support 32-bit PCREL relocations. + We'd need a new reloc type to handle 16_PCREL, and + 8_PCREL is already taken for R_SH_SWITCH8, which + apparently does something completely different than what + we need. FIXME. */ + case BFD_RELOC_16: + bfd_set_error (bfd_error_bad_value); + return; + + case BFD_RELOC_8: + bfd_set_error (bfd_error_bad_value); + return; + } + } + + /* The function adjust_reloc_syms won't convert a reloc against a weak + symbol into a reloc against a section, but bfd_install_relocation + will screw up if the symbol is defined, so we have to adjust val here + to avoid the screw up later. + + For ordinary relocs, this does not happen for ELF, since for ELF, + bfd_install_relocation uses the "special function" field of the + howto, and does not execute the code that needs to be undone, as long + as the special function does not return bfd_reloc_continue. + It can happen for GOT- and PLT-type relocs the way they are + described in elf32-sh.c as they use bfd_elf_generic_reloc, but it + doesn't matter here since those relocs don't use VAL; see below. */ + if (OUTPUT_FLAVOR != bfd_target_elf_flavour + && fixP->fx_addsy != NULL + && S_IS_WEAK (fixP->fx_addsy)) + val -= S_GET_VALUE (fixP->fx_addsy); +#endif + +#ifndef BFD_ASSEMBLER + if (fixP->fx_r_type == 0) + { + if (fixP->fx_size == 2) + fixP->fx_r_type = BFD_RELOC_16; + else if (fixP->fx_size == 4) + fixP->fx_r_type = BFD_RELOC_32; + else if (fixP->fx_size == 1) + fixP->fx_r_type = BFD_RELOC_8; + else + abort (); + } +#endif + + max = min = 0; + shift = 0; + switch (fixP->fx_r_type) + { + case BFD_RELOC_SH_IMM4: + max = 0xf; + *buf = (*buf & 0xf0) | (val & 0xf); + break; + + case BFD_RELOC_SH_IMM4BY2: + max = 0xf; + shift = 1; + *buf = (*buf & 0xf0) | ((val >> 1) & 0xf); + break; + + case BFD_RELOC_SH_IMM4BY4: + max = 0xf; + shift = 2; + *buf = (*buf & 0xf0) | ((val >> 2) & 0xf); + break; + + case BFD_RELOC_SH_IMM8BY2: + max = 0xff; + shift = 1; + *buf = val >> 1; + break; + + case BFD_RELOC_SH_IMM8BY4: + max = 0xff; + shift = 2; + *buf = val >> 2; + break; + + case BFD_RELOC_8: + case BFD_RELOC_SH_IMM8: + /* Sometimes the 8 bit value is sign extended (e.g., add) and + sometimes it is not (e.g., and). We permit any 8 bit value. + Note that adding further restrictions may invalidate + reasonable looking assembly code, such as ``and -0x1,r0''. */ + max = 0xff; + min = -0xff; + *buf++ = val; + break; + + case BFD_RELOC_SH_PCRELIMM8BY4: + /* The lower two bits of the PC are cleared before the + displacement is added in. We can assume that the destination + is on a 4 byte bounday. If this instruction is also on a 4 + byte boundary, then we want + (target - here) / 4 + and target - here is a multiple of 4. + Otherwise, we are on a 2 byte boundary, and we want + (target - (here - 2)) / 4 + and target - here is not a multiple of 4. Computing + (target - (here - 2)) / 4 == (target - here + 2) / 4 + works for both cases, since in the first case the addition of + 2 will be removed by the division. target - here is in the + variable val. */ + val = (val + 2) / 4; + if (val & ~0xff) + as_bad_where (fixP->fx_file, fixP->fx_line, _("pcrel too far")); + buf[lowbyte] = val; + break; + + case BFD_RELOC_SH_PCRELIMM8BY2: + val /= 2; + if (val & ~0xff) + as_bad_where (fixP->fx_file, fixP->fx_line, _("pcrel too far")); + buf[lowbyte] = val; + break; + + case BFD_RELOC_SH_PCDISP8BY2: + val /= 2; + if (val < -0x80 || val > 0x7f) + as_bad_where (fixP->fx_file, fixP->fx_line, _("pcrel too far")); + buf[lowbyte] = val; + break; + + case BFD_RELOC_SH_PCDISP12BY2: + val /= 2; + if (val < -0x800 || val > 0x7ff) + as_bad_where (fixP->fx_file, fixP->fx_line, _("pcrel too far")); + buf[lowbyte] = val & 0xff; + buf[highbyte] |= (val >> 8) & 0xf; + break; + + case BFD_RELOC_32: + case BFD_RELOC_32_PCREL: + md_number_to_chars (buf, val, 4); + break; + + case BFD_RELOC_16: + md_number_to_chars (buf, val, 2); + break; + + case BFD_RELOC_SH_USES: + /* Pass the value into sh_coff_reloc_mangle. */ + fixP->fx_addnumber = val; + break; + + case BFD_RELOC_SH_COUNT: + case BFD_RELOC_SH_ALIGN: + case BFD_RELOC_SH_CODE: + case BFD_RELOC_SH_DATA: + case BFD_RELOC_SH_LABEL: + /* Nothing to do here. */ + break; + + case BFD_RELOC_SH_LOOP_START: + case BFD_RELOC_SH_LOOP_END: + + case BFD_RELOC_VTABLE_INHERIT: + case BFD_RELOC_VTABLE_ENTRY: + fixP->fx_done = 0; + return; + +#ifdef OBJ_ELF + case BFD_RELOC_32_PLT_PCREL: + /* Make the jump instruction point to the address of the operand. At + runtime we merely add the offset to the actual PLT entry. */ + * valP = 0xfffffffc; + val = fixP->fx_addnumber; + if (fixP->fx_subsy) + val -= S_GET_VALUE (fixP->fx_subsy); + md_number_to_chars (buf, val, 4); + break; + + case BFD_RELOC_SH_GOTPC: + /* This is tough to explain. We end up with this one if we have + operands that look like "_GLOBAL_OFFSET_TABLE_+[.-.L284]". + The goal here is to obtain the absolute address of the GOT, + and it is strongly preferable from a performance point of + view to avoid using a runtime relocation for this. There are + cases where you have something like: + + .long _GLOBAL_OFFSET_TABLE_+[.-.L66] + + and here no correction would be required. Internally in the + assembler we treat operands of this form as not being pcrel + since the '.' is explicitly mentioned, and I wonder whether + it would simplify matters to do it this way. Who knows. In + earlier versions of the PIC patches, the pcrel_adjust field + was used to store the correction, but since the expression is + not pcrel, I felt it would be confusing to do it this way. */ + * valP -= 1; + md_number_to_chars (buf, val, 4); + break; + + case BFD_RELOC_32_GOT_PCREL: + case BFD_RELOC_SH_GOTPLT32: + * valP = 0; /* Fully resolved at runtime. No addend. */ + md_number_to_chars (buf, 0, 4); + break; + + case BFD_RELOC_32_GOTOFF: + md_number_to_chars (buf, val, 4); + break; +#endif + + default: +#ifdef HAVE_SH64 + shmedia_md_apply_fix3 (fixP, valP); + return; +#else + abort (); +#endif + } + + if (shift != 0) + { + if ((val & ((1 << shift) - 1)) != 0) + as_bad_where (fixP->fx_file, fixP->fx_line, _("misaligned offset")); + if (val >= 0) + val >>= shift; + else + val = ((val >> shift) + | ((long) -1 & ~ ((long) -1 >> shift))); + } + if (max != 0 && (val < min || val > max)) + as_bad_where (fixP->fx_file, fixP->fx_line, _("offset out of range")); + + if (fixP->fx_addsy == NULL && fixP->fx_pcrel == 0) + fixP->fx_done = 1; +} + +/* Called just before address relaxation. Return the length + by which a fragment must grow to reach it's destination. */ + +int +md_estimate_size_before_relax (fragP, segment_type) + register fragS *fragP; + register segT segment_type; +{ + int what; + + switch (fragP->fr_subtype) + { + default: +#ifdef HAVE_SH64 + return shmedia_md_estimate_size_before_relax (fragP, segment_type); +#else + abort (); +#endif + + + case C (UNCOND_JUMP, UNDEF_DISP): + /* Used to be a branch to somewhere which was unknown. */ + if (!fragP->fr_symbol) + { + fragP->fr_subtype = C (UNCOND_JUMP, UNCOND12); + } + else if (S_GET_SEGMENT (fragP->fr_symbol) == segment_type) + { + fragP->fr_subtype = C (UNCOND_JUMP, UNCOND12); + } + else + { + fragP->fr_subtype = C (UNCOND_JUMP, UNDEF_WORD_DISP); + } + break; + + case C (COND_JUMP, UNDEF_DISP): + case C (COND_JUMP_DELAY, UNDEF_DISP): + what = GET_WHAT (fragP->fr_subtype); + /* Used to be a branch to somewhere which was unknown. */ + if (fragP->fr_symbol + && S_GET_SEGMENT (fragP->fr_symbol) == segment_type) + { + /* Got a symbol and it's defined in this segment, become byte + sized - maybe it will fix up. */ + fragP->fr_subtype = C (what, COND8); + } + else if (fragP->fr_symbol) + { + /* Its got a segment, but its not ours, so it will always be long. */ + fragP->fr_subtype = C (what, UNDEF_WORD_DISP); + } + else + { + /* We know the abs value. */ + fragP->fr_subtype = C (what, COND8); + } + break; + + case C (UNCOND_JUMP, UNCOND12): + case C (UNCOND_JUMP, UNCOND32): + case C (UNCOND_JUMP, UNDEF_WORD_DISP): + case C (COND_JUMP, COND8): + case C (COND_JUMP, COND12): + case C (COND_JUMP, COND32): + case C (COND_JUMP, UNDEF_WORD_DISP): + case C (COND_JUMP_DELAY, COND8): + case C (COND_JUMP_DELAY, COND12): + case C (COND_JUMP_DELAY, COND32): + case C (COND_JUMP_DELAY, UNDEF_WORD_DISP): + /* When relaxing a section for the second time, we don't need to + do anything besides return the current size. */ + break; + } + + fragP->fr_var = md_relax_table[fragP->fr_subtype].rlx_length; + return fragP->fr_var; +} + +/* Put number into target byte order. */ + +void +md_number_to_chars (ptr, use, nbytes) + char *ptr; + valueT use; + int nbytes; +{ +#ifdef HAVE_SH64 + /* We might need to set the contents type to data. */ + sh64_flag_output (); +#endif + + if (! target_big_endian) + number_to_chars_littleendian (ptr, use, nbytes); + else + number_to_chars_bigendian (ptr, use, nbytes); +} + +/* This version is used in obj-coff.c when not using BFD_ASSEMBLER. + eg for the sh-hms target. */ + +long +md_pcrel_from (fixP) + fixS *fixP; +{ + return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address + 2; +} + +long +md_pcrel_from_section (fixP, sec) + fixS *fixP; + segT sec; +{ + if (fixP->fx_addsy != (symbolS *) NULL + && (! S_IS_DEFINED (fixP->fx_addsy) + || S_IS_EXTERN (fixP->fx_addsy) + || S_IS_WEAK (fixP->fx_addsy) + || S_GET_SEGMENT (fixP->fx_addsy) != sec)) + { + /* The symbol is undefined (or is defined but not in this section, + or we're not sure about it being the final definition). Let the + linker figure it out. We need to adjust the subtraction of a + symbol to the position of the relocated data, though. */ + return fixP->fx_subsy ? fixP->fx_where + fixP->fx_frag->fr_address : 0; + } + + return md_pcrel_from (fixP); +} + +#ifdef OBJ_COFF + +int +tc_coff_sizemachdep (frag) + fragS *frag; +{ + return md_relax_table[frag->fr_subtype].rlx_length; +} + +#endif /* OBJ_COFF */ + +#ifndef BFD_ASSEMBLER +#ifdef OBJ_COFF + +/* Map BFD relocs to SH COFF relocs. */ + +struct reloc_map +{ + bfd_reloc_code_real_type bfd_reloc; + int sh_reloc; +}; + +static const struct reloc_map coff_reloc_map[] = +{ + { BFD_RELOC_32, R_SH_IMM32 }, + { BFD_RELOC_16, R_SH_IMM16 }, + { BFD_RELOC_8, R_SH_IMM8 }, + { BFD_RELOC_SH_PCDISP8BY2, R_SH_PCDISP8BY2 }, + { BFD_RELOC_SH_PCDISP12BY2, R_SH_PCDISP }, + { BFD_RELOC_SH_IMM4, R_SH_IMM4 }, + { BFD_RELOC_SH_IMM4BY2, R_SH_IMM4BY2 }, + { BFD_RELOC_SH_IMM4BY4, R_SH_IMM4BY4 }, + { BFD_RELOC_SH_IMM8, R_SH_IMM8 }, + { BFD_RELOC_SH_IMM8BY2, R_SH_IMM8BY2 }, + { BFD_RELOC_SH_IMM8BY4, R_SH_IMM8BY4 }, + { BFD_RELOC_SH_PCRELIMM8BY2, R_SH_PCRELIMM8BY2 }, + { BFD_RELOC_SH_PCRELIMM8BY4, R_SH_PCRELIMM8BY4 }, + { BFD_RELOC_8_PCREL, R_SH_SWITCH8 }, + { BFD_RELOC_SH_SWITCH16, R_SH_SWITCH16 }, + { BFD_RELOC_SH_SWITCH32, R_SH_SWITCH32 }, + { BFD_RELOC_SH_USES, R_SH_USES }, + { BFD_RELOC_SH_COUNT, R_SH_COUNT }, + { BFD_RELOC_SH_ALIGN, R_SH_ALIGN }, + { BFD_RELOC_SH_CODE, R_SH_CODE }, + { BFD_RELOC_SH_DATA, R_SH_DATA }, + { BFD_RELOC_SH_LABEL, R_SH_LABEL }, + { BFD_RELOC_UNUSED, 0 } +}; + +/* Adjust a reloc for the SH. This is similar to the generic code, + but does some minor tweaking. */ + +void +sh_coff_reloc_mangle (seg, fix, intr, paddr) + segment_info_type *seg; + fixS *fix; + struct internal_reloc *intr; + unsigned int paddr; +{ + symbolS *symbol_ptr = fix->fx_addsy; + symbolS *dot; + + intr->r_vaddr = paddr + fix->fx_frag->fr_address + fix->fx_where; + + if (! SWITCH_TABLE (fix)) + { + const struct reloc_map *rm; + + for (rm = coff_reloc_map; rm->bfd_reloc != BFD_RELOC_UNUSED; rm++) + if (rm->bfd_reloc == (bfd_reloc_code_real_type) fix->fx_r_type) + break; + if (rm->bfd_reloc == BFD_RELOC_UNUSED) + as_bad_where (fix->fx_file, fix->fx_line, + _("Can not represent %s relocation in this object file format"), + bfd_get_reloc_code_name (fix->fx_r_type)); + intr->r_type = rm->sh_reloc; + intr->r_offset = 0; + } + else + { + know (sh_relax); + + if (fix->fx_r_type == BFD_RELOC_16) + intr->r_type = R_SH_SWITCH16; + else if (fix->fx_r_type == BFD_RELOC_8) + intr->r_type = R_SH_SWITCH8; + else if (fix->fx_r_type == BFD_RELOC_32) + intr->r_type = R_SH_SWITCH32; + else + abort (); + + /* For a switch reloc, we set r_offset to the difference between + the reloc address and the subtrahend. When the linker is + doing relaxing, it can use the determine the starting and + ending points of the switch difference expression. */ + intr->r_offset = intr->r_vaddr - S_GET_VALUE (fix->fx_subsy); + } + + /* PC relative relocs are always against the current section. */ + if (symbol_ptr == NULL) + { + switch (fix->fx_r_type) + { + case BFD_RELOC_SH_PCRELIMM8BY2: + case BFD_RELOC_SH_PCRELIMM8BY4: + case BFD_RELOC_SH_PCDISP8BY2: + case BFD_RELOC_SH_PCDISP12BY2: + case BFD_RELOC_SH_USES: + symbol_ptr = seg->dot; + break; + default: + break; + } + } + + if (fix->fx_r_type == BFD_RELOC_SH_USES) + { + /* We can't store the offset in the object file, since this + reloc does not take up any space, so we store it in r_offset. + The fx_addnumber field was set in md_apply_fix3. */ + intr->r_offset = fix->fx_addnumber; + } + else if (fix->fx_r_type == BFD_RELOC_SH_COUNT) + { + /* We can't store the count in the object file, since this reloc + does not take up any space, so we store it in r_offset. The + fx_offset field was set when the fixup was created in + sh_coff_frob_file. */ + intr->r_offset = fix->fx_offset; + /* This reloc is always absolute. */ + symbol_ptr = NULL; + } + else if (fix->fx_r_type == BFD_RELOC_SH_ALIGN) + { + /* Store the alignment in the r_offset field. */ + intr->r_offset = fix->fx_offset; + /* This reloc is always absolute. */ + symbol_ptr = NULL; + } + else if (fix->fx_r_type == BFD_RELOC_SH_CODE + || fix->fx_r_type == BFD_RELOC_SH_DATA + || fix->fx_r_type == BFD_RELOC_SH_LABEL) + { + /* These relocs are always absolute. */ + symbol_ptr = NULL; + } + + /* Turn the segment of the symbol into an offset. */ + if (symbol_ptr != NULL) + { + dot = segment_info[S_GET_SEGMENT (symbol_ptr)].dot; + if (dot != NULL) + intr->r_symndx = dot->sy_number; + else + intr->r_symndx = symbol_ptr->sy_number; + } + else + intr->r_symndx = -1; +} + +#endif /* OBJ_COFF */ +#endif /* ! BFD_ASSEMBLER */ + +#ifdef BFD_ASSEMBLER + +/* Create a reloc. */ + +arelent * +tc_gen_reloc (section, fixp) + asection *section ATTRIBUTE_UNUSED; + fixS *fixp; +{ + arelent *rel; + bfd_reloc_code_real_type r_type; + + rel = (arelent *) xmalloc (sizeof (arelent)); + rel->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *)); + *rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy); + rel->address = fixp->fx_frag->fr_address + fixp->fx_where; + + if (fixp->fx_subsy + && S_GET_SEGMENT (fixp->fx_subsy) == absolute_section) + { + fixp->fx_addnumber -= S_GET_VALUE (fixp->fx_subsy); + fixp->fx_subsy = 0; + } + + r_type = fixp->fx_r_type; + + if (SWITCH_TABLE (fixp)) + { + rel->addend = rel->address - S_GET_VALUE (fixp->fx_subsy); + if (r_type == BFD_RELOC_16) + r_type = BFD_RELOC_SH_SWITCH16; + else if (r_type == BFD_RELOC_8) + r_type = BFD_RELOC_8_PCREL; + else if (r_type == BFD_RELOC_32) + r_type = BFD_RELOC_SH_SWITCH32; + else + abort (); + } + else if (r_type == BFD_RELOC_SH_USES) + rel->addend = fixp->fx_addnumber; + else if (r_type == BFD_RELOC_SH_COUNT) + rel->addend = fixp->fx_offset; + else if (r_type == BFD_RELOC_SH_ALIGN) + rel->addend = fixp->fx_offset; + else if (r_type == BFD_RELOC_VTABLE_INHERIT + || r_type == BFD_RELOC_VTABLE_ENTRY) + rel->addend = fixp->fx_offset; + else if (r_type == BFD_RELOC_SH_LOOP_START + || r_type == BFD_RELOC_SH_LOOP_END) + rel->addend = fixp->fx_offset; + else if (r_type == BFD_RELOC_SH_LABEL && fixp->fx_pcrel) + { + rel->addend = 0; + rel->address = rel->addend = fixp->fx_offset; + } +#ifdef HAVE_SH64 + else if (shmedia_init_reloc (rel, fixp)) + ; +#endif + else if (fixp->fx_pcrel) + rel->addend = fixp->fx_addnumber; + else if (r_type == BFD_RELOC_32 || r_type == BFD_RELOC_32_GOTOFF) + rel->addend = fixp->fx_addnumber; + else + rel->addend = 0; + + rel->howto = bfd_reloc_type_lookup (stdoutput, r_type); + if (rel->howto == NULL || fixp->fx_subsy) + { + as_bad_where (fixp->fx_file, fixp->fx_line, + _("Cannot represent relocation type %s"), + bfd_get_reloc_code_name (r_type)); + /* Set howto to a garbage value so that we can keep going. */ + rel->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32); + assert (rel->howto != NULL); + } + + return rel; +} + +#ifdef OBJ_ELF +inline static char * +sh_end_of_match (cont, what) + char *cont, *what; +{ + int len = strlen (what); + + if (strncasecmp (cont, what, strlen (what)) == 0 + && ! is_part_of_name (cont[len])) + return cont + len; + + return NULL; +} + +int +sh_parse_name (name, exprP, nextcharP) + char const *name; + expressionS *exprP; + char *nextcharP; +{ + char *next = input_line_pointer; + char *next_end; + int reloc_type; + segT segment; + + exprP->X_op_symbol = NULL; + + if (strcmp (name, GLOBAL_OFFSET_TABLE_NAME) == 0) + { + if (! GOT_symbol) + GOT_symbol = symbol_find_or_make (name); + + exprP->X_add_symbol = GOT_symbol; + no_suffix: + /* If we have an absolute symbol or a reg, then we know its + value now. */ + segment = S_GET_SEGMENT (exprP->X_add_symbol); + if (segment == absolute_section) + { + exprP->X_op = O_constant; + exprP->X_add_number = S_GET_VALUE (exprP->X_add_symbol); + exprP->X_add_symbol = NULL; + } + else if (segment == reg_section) + { + exprP->X_op = O_register; + exprP->X_add_number = S_GET_VALUE (exprP->X_add_symbol); + exprP->X_add_symbol = NULL; + } + else + { + exprP->X_op = O_symbol; + exprP->X_add_number = 0; + } + + return 1; + } + + exprP->X_add_symbol = symbol_find_or_make (name); + + if (*nextcharP != '@') + goto no_suffix; + else if ((next_end = sh_end_of_match (next + 1, "GOTOFF"))) + reloc_type = BFD_RELOC_32_GOTOFF; + else if ((next_end = sh_end_of_match (next + 1, "GOTPLT"))) + reloc_type = BFD_RELOC_SH_GOTPLT32; + else if ((next_end = sh_end_of_match (next + 1, "GOT"))) + reloc_type = BFD_RELOC_32_GOT_PCREL; + else if ((next_end = sh_end_of_match (next + 1, "PLT"))) + reloc_type = BFD_RELOC_32_PLT_PCREL; + else + goto no_suffix; + + *input_line_pointer = *nextcharP; + input_line_pointer = next_end; + *nextcharP = *input_line_pointer; + *input_line_pointer = '\0'; + + exprP->X_op = O_PIC_reloc; + exprP->X_add_number = 0; + exprP->X_md = reloc_type; + + return 1; +} +#endif +#endif /* BFD_ASSEMBLER */ |