diff options
Diffstat (limited to 'contrib/binutils/Makefile.in')
-rw-r--r-- | contrib/binutils/Makefile.in | 217 |
1 files changed, 187 insertions, 30 deletions
diff --git a/contrib/binutils/Makefile.in b/contrib/binutils/Makefile.in index d4ae7e9..e48d98a 100644 --- a/contrib/binutils/Makefile.in +++ b/contrib/binutils/Makefile.in @@ -141,9 +141,13 @@ M4 = `if [ -f $$r/m4/m4 ] ; \ then echo $$r/m4/m4 ; \ else echo ${DEFAULT_M4} ; fi` +# For an installed makeinfo, we require it to be from texinfo 4 or +# higher, else we use the "missing" dummy. MAKEINFO = `if [ -f $$r/texinfo/makeinfo/Makefile ] ; \ then echo $$r/texinfo/makeinfo/makeinfo ; \ - else echo makeinfo ; fi` + else if (makeinfo --version \ + | egrep 'texinfo[^0-9]*([1-3][0-9]|[4-9])') >/dev/null 2>&1; \ + then echo makeinfo; else echo $$s/missing makeinfo; fi; fi` # This just becomes part of the MAKEINFO definition passed down to # sub-makes. It lets flags be given on the command line while still @@ -175,8 +179,16 @@ TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib libio librx libstd # Changed by configure to $(target_alias) if cross. TARGET_SUBDIR = . -# This is set by the configure script to the arguments passed to configure. -CONFIG_ARGUMENTS = +BUILD_CONFIGDIRS = libiberty +BUILD_SUBDIR = . + +# This is set by the configure script to the arguments to use when configuring +# directories built for the target. +TARGET_CONFIGARGS = + +# This is set by the configure script to the arguments to use when configuring +# directories built for the build system. +BUILD_CONFIGARGS = # This is set by configure to REALLY_SET_LIB_PATH if --enable-shared # was used. @@ -220,6 +232,7 @@ FLAGS_FOR_TARGET = CC_FOR_TARGET = CHILL_FOR_TARGET = CXX_FOR_TARGET = +CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = # If GCC_FOR_TARGET is not overriden on the command line, then this # variable is passed down to the gcc Makefile, where it is used to @@ -230,8 +243,10 @@ GCC_FOR_TARGET = $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET) AS_FOR_TARGET = ` \ if [ -f $$r/gas/as-new ] ; then \ echo $$r/gas/as-new ; \ + elif [ -f $$r/gcc/xgcc ]; then \ + $(CC_FOR_TARGET) -print-prog-name=as ; \ else \ - if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ + if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ echo $(AS); \ else \ t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \ @@ -241,8 +256,10 @@ AS_FOR_TARGET = ` \ LD_FOR_TARGET = ` \ if [ -f $$r/ld/ld-new ] ; then \ echo $$r/ld/ld-new ; \ + elif [ -f $$r/gcc/xgcc ]; then \ + $(CC_FOR_TARGET) -print-prog-name=ld ; \ else \ - if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ + if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ echo $(LD); \ else \ t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \ @@ -253,7 +270,7 @@ DLLTOOL_FOR_TARGET = ` \ if [ -f $$r/binutils/dlltool ] ; then \ echo $$r/binutils/dlltool ; \ else \ - if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ + if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ echo $(DLLTOOL); \ else \ t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \ @@ -264,7 +281,7 @@ WINDRES_FOR_TARGET = ` \ if [ -f $$r/binutils/windres ] ; then \ echo $$r/binutils/windres ; \ else \ - if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ + if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ echo $(WINDRES); \ else \ t='$(program_transform_name)'; echo windres | sed -e 's/x/x/' $$t ; \ @@ -275,7 +292,7 @@ AR_FOR_TARGET = ` \ if [ -f $$r/binutils/ar ] ; then \ echo $$r/binutils/ar ; \ else \ - if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ + if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ echo $(AR); \ else \ t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \ @@ -286,8 +303,12 @@ RANLIB_FOR_TARGET = ` \ if [ -f $$r/binutils/ranlib ] ; then \ echo $$r/binutils/ranlib ; \ else \ - if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ - echo $(RANLIB); \ + if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ + if [ x'$(RANLIB)' != x ]; then \ + echo $(RANLIB); \ + else \ + echo ranlib; \ + fi; \ else \ t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \ fi; \ @@ -296,8 +317,10 @@ RANLIB_FOR_TARGET = ` \ NM_FOR_TARGET = ` \ if [ -f $$r/binutils/nm-new ] ; then \ echo $$r/binutils/nm-new ; \ + elif [ -f $$r/gcc/xgcc ]; then \ + $(CC_FOR_TARGET) -print-prog-name=nm ; \ else \ - if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ + if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ echo $(NM); \ else \ t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \ @@ -385,6 +408,14 @@ BASE_FLAGS_TO_PASS = \ "target_alias=$(target_alias)" \ "libsubdir=$(libsubdir)" +# For any flags above that may contain shell code that varies from one +# target library to another. When doing recursive invocations of the +# top-level Makefile, we don't want the outer make to evaluate them, +# so we pass these variables down unchanged. They must not contain +# single nor double quotes. +RECURSE_FLAGS = \ + CXX_FOR_TARGET='$(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)' + # Flags to pass down to most sub-makes, in which we're building with # the host environment. # If any variables are added here, they must be added to do-*, below. @@ -466,6 +497,18 @@ EXTRA_GCC_FLAGS = \ GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS) # This is a list of the targets for all of the modules which are compiled +# using the build machine's native compiler. Configure edits the second +# macro for build!=host builds. +ALL_BUILD_MODULES_LIST = \ + all-build-libiberty +ALL_BUILD_MODULES = + +# This is a list of the configure targets for all of the modules which +# are compiled using the native tools. +CONFIGURE_BUILD_MODULES = \ + configure-build-libiberty + +# This is a list of the targets for all of the modules which are compiled # using $(FLAGS_TO_PASS). ALL_MODULES = \ all-apache \ @@ -931,6 +974,7 @@ CLEAN_X11_MODULES = \ # The target built for a native build. .PHONY: all.normal all.normal: \ + $(ALL_BUILD_MODULES) \ $(ALL_MODULES) \ $(ALL_X11_MODULES) \ $(ALL_TARGET_MODULES) \ @@ -964,16 +1008,15 @@ $(DO_X): case $$i in \ gcc) \ for flag in $(EXTRA_GCC_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ ;; \ *) \ for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ ;; \ esac ; \ - export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \ if (cd ./$$i; \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ @@ -990,9 +1033,8 @@ $(DO_X): for i in $(TARGET_CONFIGDIRS) -dummy-; do \ if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \ for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \ if (cd $(TARGET_SUBDIR)/$$i; \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ @@ -1174,6 +1216,106 @@ gcc-no-fixedincludes: mv gcc/tmp-include gcc/include 2>/dev/null; \ else true; fi +# This rule is used to build the modules which are built with the +# build machine's native compiler. +.PHONY: $(ALL_BUILD_MODULES) +$(ALL_BUILD_MODULES): + dir=`echo $@ | sed -e 's/all-build-//'`; \ + if [ -f ./$${dir}/Makefile ] ; then \ + r=`pwd`; export r; \ + s=`cd $(srcdir); pwd`; export s; \ + (cd $(BUILD_SUBDIR)/$${dir} && $(MAKE) all); \ + else \ + true; \ + fi + +# This rule is used to configure the modules which are built with the +# native tools. +.PHONY: $(CONFIGURE_BUILD_MODULES) +$(CONFIGURE_BUILD_MODULES): + @dir=`echo $@ | sed -e 's/configure-build-//'`; \ + if [ ! -d $(BUILD_SUBDIR) ]; then \ + true; \ + elif [ -f $(BUILD_SUBDIR)/$${dir}/Makefile ] ; then \ + true; \ + elif echo " $(BUILD_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/$${dir} ]; then \ + [ -d $(BUILD_SUBDIR)/$${dir} ] || mkdir $(BUILD_SUBDIR)/$${dir};\ + r=`pwd`; export r; \ + s=`cd $(srcdir); pwd`; export s; \ + AR="$(AR_FOR_BUILD)"; export AR; \ + AS="$(AS_FOR_BUILD)"; export AS; \ + CC="$(CC_FOR_BUILD)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \ + CXX="$(CXX_FOR_BUILD)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \ + LD="$(LD_FOR_BUILD)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \ + NM="$(NM_FOR_BUILD)"; export NM; \ + RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \ + echo Configuring in $(BUILD_SUBDIR)/$${dir}; \ + cd "$(BUILD_SUBDIR)/$${dir}" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(BUILD_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(BUILD_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/$${dir}"; \ + libsrcdir="$$s/$${dir}"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(BUILD_CONFIGARGS) $${srcdiroption} \ + --with-build-subdir="$(BUILD_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(BUILD_CONFIGARGS) $${srcdiroption} \ + --with-build-subdir="$(BUILD_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir $${dir} || true; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi + # This rule is used to build the modules which use FLAGS_TO_PASS. To # build a target all-X means to cd to X and make all. # @@ -1198,7 +1340,7 @@ $(ALL_MODULES) all-gui all-libproc: .PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES) $(NATIVE_CHECK_MODULES): - @if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ + @if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ dir=`echo $@ | sed -e 's/check-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ r=`pwd`; export r; \ @@ -1318,12 +1460,12 @@ $(CONFIGURE_TARGET_MODULES): if [ -f $${libsrcdir}/configure ] ; then \ rm -f no-such-file skip-this-dir; \ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ - $(CONFIG_ARGUMENTS) $${srcdiroption} \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ --with-target-subdir="$(TARGET_SUBDIR)"; \ else \ rm -f no-such-file skip-this-dir; \ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ - $(CONFIG_ARGUMENTS) $${srcdiroption} \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ --with-target-subdir="$(TARGET_SUBDIR)"; \ fi; \ if [ -f skip-this-dir ] ; then \ @@ -1349,7 +1491,8 @@ $(ALL_TARGET_MODULES): r=`pwd`; export r; \ s=`cd $(srcdir); pwd`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ + (cd $(TARGET_SUBDIR)/$${dir}; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ else \ true; \ fi @@ -1363,7 +1506,8 @@ $(CHECK_TARGET_MODULES): r=`pwd`; export r; \ s=`cd $(srcdir); pwd`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/$${dir};$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ + (cd $(TARGET_SUBDIR)/$${dir}; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ else \ true; \ fi @@ -1478,7 +1622,7 @@ bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean b s=`cd $(srcdir); pwd` ; export s; \ $(SET_LIB_PATH) \ echo "Building runtime libraries"; \ - $(MAKE) $(BASE_FLAGS_TO_PASS) all + $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all .PHONY: cross cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld @@ -1491,7 +1635,8 @@ cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld s=`cd $(srcdir); pwd` ; export s; \ $(SET_LIB_PATH) \ echo "Building runtime libraries"; \ - $(MAKE) $(BASE_FLAGS_TO_PASS) all LANGUAGES="c c++" + $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) \ + LANGUAGES="c c++" all .PHONY: check-gcc check-gcc: @@ -1542,6 +1687,9 @@ install-dosrel: installdirs info install-dosrel-fake: +ALL_GCC = all-gcc +ALL_GCC_C = $(ALL_GCC) all-target-newlib all-target-libgloss +ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++ all-target-libstdc++-v3 # This is a list of inter-dependencies among modules. all-apache: @@ -1578,17 +1726,14 @@ all-flex: all-libiberty all-bison all-byacc all-gas: all-libiberty all-opcodes all-bfd all-intl all-gash: all-tcl all-gawk: -ALL_GCC = all-gcc -ALL_GCC_C = $(ALL_GCC) all-target-newlib all-target-libgloss -ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++ all-target-libstdc++-v3 all-gcc: all-bison all-byacc all-binutils all-gas all-ld all-zlib all-bootstrap: all-libiberty all-texinfo all-bison all-byacc all-binutils all-gas all-ld all-zlib GDB_TK = all-tk all-tcl all-itcl all-tix all-libgui all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-bison all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK) all-gettext: all-gnuserv: -configure-target-gperf: $(ALL_GCC_C) -all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++ +configure-target-gperf: $(ALL_GCC_CXX) +all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++-v3 all-gprof: all-libiberty all-bfd all-opcodes all-intl all-grep: all-libiberty all-grez: all-libiberty all-bfd all-opcodes @@ -1611,6 +1756,9 @@ all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libib check-target-libio: all-target-libstdc++ all-libgui: all-tcl all-tk all-tcl8.1 all-tk8.1 all-itcl all-libiberty: + +all-build-libiberty: configure-build-libiberty + configure-target-libffi: $(ALL_GCC_C) all-target-libffi: configure-target-libffi configure-target-libjava: $(ALL_GCC_CXX) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi @@ -1630,7 +1778,7 @@ configure-target-libchill: $(ALL_GCC_C) all-target-libchill: configure-target-libchill all-target-libiberty configure-target-libobjc: $(ALL_GCC_C) all-target-libobjc: configure-target-libobjc all-target-libiberty -all-m4: all-libiberty +all-m4: all-libiberty all-texinfo all-make: all-libiberty all-mmalloc: configure-target-newlib: $(ALL_GCC) @@ -1743,8 +1891,12 @@ VER = ` if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \ elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \ sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \ - else \ + elif test -f $(TOOL)/version.in; then \ + head -1 $(TOOL)/version.in; \ + elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \ sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \ + else \ + echo VERSION; \ fi` PACKAGE = $(TOOL) @@ -1836,6 +1988,11 @@ do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex else true; fi chmod -R og=u . || chmod og=u `find . -print` # + # Create .gmo files from .po files. + for f in `find . -name '*.po' -type f -print`; do \ + msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \ + done + # -rm -f $(PACKAGE)-$(VER) ln -s proto-toplev $(PACKAGE)-$(VER) |