diff options
Diffstat (limited to 'cddl/contrib/opensolaris/cmd/zpool/zpool_vdev.c')
| -rw-r--r-- | cddl/contrib/opensolaris/cmd/zpool/zpool_vdev.c | 1127 |
1 files changed, 1127 insertions, 0 deletions
diff --git a/cddl/contrib/opensolaris/cmd/zpool/zpool_vdev.c b/cddl/contrib/opensolaris/cmd/zpool/zpool_vdev.c new file mode 100644 index 0000000..35a636c --- /dev/null +++ b/cddl/contrib/opensolaris/cmd/zpool/zpool_vdev.c @@ -0,0 +1,1127 @@ +/* + * CDDL HEADER START + * + * The contents of this file are subject to the terms of the + * Common Development and Distribution License (the "License"). + * You may not use this file except in compliance with the License. + * + * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE + * or http://www.opensolaris.org/os/licensing. + * See the License for the specific language governing permissions + * and limitations under the License. + * + * When distributing Covered Code, include this CDDL HEADER in each + * file and include the License file at usr/src/OPENSOLARIS.LICENSE. + * If applicable, add the following below this CDDL HEADER, with the + * fields enclosed by brackets "[]" replaced with your own identifying + * information: Portions Copyright [yyyy] [name of copyright owner] + * + * CDDL HEADER END + */ + +/* + * Copyright 2008 Sun Microsystems, Inc. All rights reserved. + * Use is subject to license terms. + */ + +/* + * Functions to convert between a list of vdevs and an nvlist representing the + * configuration. Each entry in the list can be one of: + * + * Device vdevs + * disk=(path=..., devid=...) + * file=(path=...) + * + * Group vdevs + * raidz[1|2]=(...) + * mirror=(...) + * + * Hot spares + * + * While the underlying implementation supports it, group vdevs cannot contain + * other group vdevs. All userland verification of devices is contained within + * this file. If successful, the nvlist returned can be passed directly to the + * kernel; we've done as much verification as possible in userland. + * + * Hot spares are a special case, and passed down as an array of disk vdevs, at + * the same level as the root of the vdev tree. + * + * The only function exported by this file is 'make_root_vdev'. The + * function performs several passes: + * + * 1. Construct the vdev specification. Performs syntax validation and + * makes sure each device is valid. + * 2. Check for devices in use. Using libdiskmgt, makes sure that no + * devices are also in use. Some can be overridden using the 'force' + * flag, others cannot. + * 3. Check for replication errors if the 'force' flag is not specified. + * validates that the replication level is consistent across the + * entire pool. + * 4. Call libzfs to label any whole disks with an EFI label. + */ + +#include <assert.h> +#include <devid.h> +#include <errno.h> +#include <fcntl.h> +#include <libintl.h> +#include <libnvpair.h> +#include <stdio.h> +#include <string.h> +#include <unistd.h> +#include <paths.h> +#include <sys/stat.h> +#include <sys/disk.h> +#include <sys/mntent.h> +#include <libgeom.h> + +#include "zpool_util.h" + +/* + * For any given vdev specification, we can have multiple errors. The + * vdev_error() function keeps track of whether we have seen an error yet, and + * prints out a header if its the first error we've seen. + */ +boolean_t error_seen; +boolean_t is_force; + +/*PRINTFLIKE1*/ +static void +vdev_error(const char *fmt, ...) +{ + va_list ap; + + if (!error_seen) { + (void) fprintf(stderr, gettext("invalid vdev specification\n")); + if (!is_force) + (void) fprintf(stderr, gettext("use '-f' to override " + "the following errors:\n")); + else + (void) fprintf(stderr, gettext("the following errors " + "must be manually repaired:\n")); + error_seen = B_TRUE; + } + + va_start(ap, fmt); + (void) vfprintf(stderr, fmt, ap); + va_end(ap); +} + +/* + * Check that a file is valid. All we can do in this case is check that it's + * not in use by another pool, and not in use by swap. + */ +static int +check_file(const char *file, boolean_t force, boolean_t isspare) +{ + char *name; + int fd; + int ret = 0; + int err; + pool_state_t state; + boolean_t inuse; + +#if 0 + if (dm_inuse_swap(file, &err)) { + if (err) + libdiskmgt_error(err); + else + vdev_error(gettext("%s is currently used by swap. " + "Please see swap(1M).\n"), file); + return (-1); + } +#endif + + if ((fd = open(file, O_RDONLY)) < 0) + return (0); + + if (zpool_in_use(g_zfs, fd, &state, &name, &inuse) == 0 && inuse) { + const char *desc; + + switch (state) { + case POOL_STATE_ACTIVE: + desc = gettext("active"); + break; + + case POOL_STATE_EXPORTED: + desc = gettext("exported"); + break; + + case POOL_STATE_POTENTIALLY_ACTIVE: + desc = gettext("potentially active"); + break; + + default: + desc = gettext("unknown"); + break; + } + + /* + * Allow hot spares to be shared between pools. + */ + if (state == POOL_STATE_SPARE && isspare) + return (0); + + if (state == POOL_STATE_ACTIVE || + state == POOL_STATE_SPARE || !force) { + switch (state) { + case POOL_STATE_SPARE: + vdev_error(gettext("%s is reserved as a hot " + "spare for pool %s\n"), file, name); + break; + default: + vdev_error(gettext("%s is part of %s pool " + "'%s'\n"), file, desc, name); + break; + } + ret = -1; + } + + free(name); + } + + (void) close(fd); + return (ret); +} + +static int +check_provider(const char *name, boolean_t force, boolean_t isspare) +{ + char path[MAXPATHLEN]; + + if (strncmp(name, _PATH_DEV, sizeof(_PATH_DEV) - 1) != 0) + snprintf(path, sizeof(path), "%s%s", _PATH_DEV, name); + else + strlcpy(path, name, sizeof(path)); + + return (check_file(path, force, isspare)); +} + +/* + * By "whole disk" we mean an entire physical disk (something we can + * label, toggle the write cache on, etc.) as opposed to the full + * capacity of a pseudo-device such as lofi or did. We act as if we + * are labeling the disk, which should be a pretty good test of whether + * it's a viable device or not. Returns B_TRUE if it is and B_FALSE if + * it isn't. + */ +static boolean_t +is_whole_disk(const char *name) +{ + int fd; + + fd = g_open(name, 0); + if (fd >= 0) { + g_close(fd); + return (B_TRUE); + } + return (B_FALSE); +} + +/* + * Create a leaf vdev. Determine if this is a GEOM provider. + * Valid forms for a leaf vdev are: + * + * /dev/xxx Complete path to a GEOM provider + * xxx Shorthand for /dev/xxx + */ +static nvlist_t * +make_leaf_vdev(const char *arg, uint64_t is_log) +{ + char path[MAXPATHLEN]; + struct stat64 statbuf; + nvlist_t *vdev = NULL; + char *type = NULL; + boolean_t wholedisk = B_FALSE; + + /* + * Determine what type of vdev this is, and put the full path into + * 'path'. We detect whether this is a device of file afterwards by + * checking the st_mode of the file. + */ + if (arg[0] == '/') { + /* + * Complete device or file path. Exact type is determined by + * examining the file descriptor afterwards. + */ + wholedisk = is_whole_disk(arg); + if (!wholedisk && (stat64(arg, &statbuf) != 0)) { + (void) fprintf(stderr, + gettext("cannot open '%s': %s\n"), + arg, strerror(errno)); + return (NULL); + } + + (void) strlcpy(path, arg, sizeof (path)); + } else { + /* + * This may be a short path for a device, or it could be total + * gibberish. Check to see if it's a known device in + * /dev/dsk/. As part of this check, see if we've been given a + * an entire disk (minus the slice number). + */ + if (strncmp(arg, _PATH_DEV, sizeof(_PATH_DEV) - 1) == 0) + strlcpy(path, arg, sizeof (path)); + else + snprintf(path, sizeof (path), "%s%s", _PATH_DEV, arg); + wholedisk = is_whole_disk(path); + if (!wholedisk && (stat64(path, &statbuf) != 0)) { + /* + * If we got ENOENT, then the user gave us + * gibberish, so try to direct them with a + * reasonable error message. Otherwise, + * regurgitate strerror() since it's the best we + * can do. + */ + if (errno == ENOENT) { + (void) fprintf(stderr, + gettext("cannot open '%s': no such " + "GEOM provider\n"), arg); + (void) fprintf(stderr, + gettext("must be a full path or " + "shorthand device name\n")); + return (NULL); + } else { + (void) fprintf(stderr, + gettext("cannot open '%s': %s\n"), + path, strerror(errno)); + return (NULL); + } + } + } + + /* + * Determine whether this is a device or a file. + */ + if (wholedisk) { + type = VDEV_TYPE_DISK; + } else if (S_ISREG(statbuf.st_mode)) { + type = VDEV_TYPE_FILE; + } else { + (void) fprintf(stderr, gettext("cannot use '%s': must be a " + "GEOM provider or regular file\n"), path); + return (NULL); + } + + /* + * Finally, we have the complete device or file, and we know that it is + * acceptable to use. Construct the nvlist to describe this vdev. All + * vdevs have a 'path' element, and devices also have a 'devid' element. + */ + verify(nvlist_alloc(&vdev, NV_UNIQUE_NAME, 0) == 0); + verify(nvlist_add_string(vdev, ZPOOL_CONFIG_PATH, path) == 0); + verify(nvlist_add_string(vdev, ZPOOL_CONFIG_TYPE, type) == 0); + verify(nvlist_add_uint64(vdev, ZPOOL_CONFIG_IS_LOG, is_log) == 0); + if (strcmp(type, VDEV_TYPE_DISK) == 0) + verify(nvlist_add_uint64(vdev, ZPOOL_CONFIG_WHOLE_DISK, + (uint64_t)B_FALSE) == 0); + + /* + * For a whole disk, defer getting its devid until after labeling it. + */ + if (1 || (S_ISBLK(statbuf.st_mode) && !wholedisk)) { + /* + * Get the devid for the device. + */ + int fd; + ddi_devid_t devid; + char *minor = NULL, *devid_str = NULL; + + if ((fd = open(path, O_RDONLY)) < 0) { + (void) fprintf(stderr, gettext("cannot open '%s': " + "%s\n"), path, strerror(errno)); + nvlist_free(vdev); + return (NULL); + } + + if (devid_get(fd, &devid) == 0) { + if (devid_get_minor_name(fd, &minor) == 0 && + (devid_str = devid_str_encode(devid, minor)) != + NULL) { + verify(nvlist_add_string(vdev, + ZPOOL_CONFIG_DEVID, devid_str) == 0); + } + if (devid_str != NULL) + devid_str_free(devid_str); + if (minor != NULL) + devid_str_free(minor); + devid_free(devid); + } + + (void) close(fd); + } + + return (vdev); +} + +/* + * Go through and verify the replication level of the pool is consistent. + * Performs the following checks: + * + * For the new spec, verifies that devices in mirrors and raidz are the + * same size. + * + * If the current configuration already has inconsistent replication + * levels, ignore any other potential problems in the new spec. + * + * Otherwise, make sure that the current spec (if there is one) and the new + * spec have consistent replication levels. + */ +typedef struct replication_level { + char *zprl_type; + uint64_t zprl_children; + uint64_t zprl_parity; +} replication_level_t; + +#define ZPOOL_FUZZ (16 * 1024 * 1024) + +/* + * Given a list of toplevel vdevs, return the current replication level. If + * the config is inconsistent, then NULL is returned. If 'fatal' is set, then + * an error message will be displayed for each self-inconsistent vdev. + */ +static replication_level_t * +get_replication(nvlist_t *nvroot, boolean_t fatal) +{ + nvlist_t **top; + uint_t t, toplevels; + nvlist_t **child; + uint_t c, children; + nvlist_t *nv; + char *type; + replication_level_t lastrep, rep, *ret; + boolean_t dontreport; + + ret = safe_malloc(sizeof (replication_level_t)); + + verify(nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, + &top, &toplevels) == 0); + + lastrep.zprl_type = NULL; + for (t = 0; t < toplevels; t++) { + uint64_t is_log = B_FALSE; + + nv = top[t]; + + /* + * For separate logs we ignore the top level vdev replication + * constraints. + */ + (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_IS_LOG, &is_log); + if (is_log) + continue; + + verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, + &type) == 0); + if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, + &child, &children) != 0) { + /* + * This is a 'file' or 'disk' vdev. + */ + rep.zprl_type = type; + rep.zprl_children = 1; + rep.zprl_parity = 0; + } else { + uint64_t vdev_size; + + /* + * This is a mirror or RAID-Z vdev. Go through and make + * sure the contents are all the same (files vs. disks), + * keeping track of the number of elements in the + * process. + * + * We also check that the size of each vdev (if it can + * be determined) is the same. + */ + rep.zprl_type = type; + rep.zprl_children = 0; + + if (strcmp(type, VDEV_TYPE_RAIDZ) == 0) { + verify(nvlist_lookup_uint64(nv, + ZPOOL_CONFIG_NPARITY, + &rep.zprl_parity) == 0); + assert(rep.zprl_parity != 0); + } else { + rep.zprl_parity = 0; + } + + /* + * The 'dontreport' variable indicates that we've + * already reported an error for this spec, so don't + * bother doing it again. + */ + type = NULL; + dontreport = 0; + vdev_size = -1ULL; + for (c = 0; c < children; c++) { + nvlist_t *cnv = child[c]; + char *path; + struct stat64 statbuf; + uint64_t size = -1ULL; + char *childtype; + int fd, err; + + rep.zprl_children++; + + verify(nvlist_lookup_string(cnv, + ZPOOL_CONFIG_TYPE, &childtype) == 0); + + /* + * If this is a replacing or spare vdev, then + * get the real first child of the vdev. + */ + if (strcmp(childtype, + VDEV_TYPE_REPLACING) == 0 || + strcmp(childtype, VDEV_TYPE_SPARE) == 0) { + nvlist_t **rchild; + uint_t rchildren; + + verify(nvlist_lookup_nvlist_array(cnv, + ZPOOL_CONFIG_CHILDREN, &rchild, + &rchildren) == 0); + assert(rchildren == 2); + cnv = rchild[0]; + + verify(nvlist_lookup_string(cnv, + ZPOOL_CONFIG_TYPE, + &childtype) == 0); + } + + verify(nvlist_lookup_string(cnv, + ZPOOL_CONFIG_PATH, &path) == 0); + + /* + * If we have a raidz/mirror that combines disks + * with files, report it as an error. + */ + if (!dontreport && type != NULL && + strcmp(type, childtype) != 0) { + if (ret != NULL) + free(ret); + ret = NULL; + if (fatal) + vdev_error(gettext( + "mismatched replication " + "level: %s contains both " + "files and devices\n"), + rep.zprl_type); + else + return (NULL); + dontreport = B_TRUE; + } + + /* + * According to stat(2), the value of 'st_size' + * is undefined for block devices and character + * devices. But there is no effective way to + * determine the real size in userland. + * + * Instead, we'll take advantage of an + * implementation detail of spec_size(). If the + * device is currently open, then we (should) + * return a valid size. + * + * If we still don't get a valid size (indicated + * by a size of 0 or MAXOFFSET_T), then ignore + * this device altogether. + */ + if ((fd = open(path, O_RDONLY)) >= 0) { + err = fstat64(fd, &statbuf); + if (err == 0 && + S_ISCHR(statbuf.st_mode)) { + err = ioctl(fd, DIOCGMEDIASIZE, + &statbuf.st_size); + } + (void) close(fd); + } else { + err = stat64(path, &statbuf); + } + if (err != 0 || statbuf.st_size == 0) + continue; + + size = statbuf.st_size; + + /* + * Also make sure that devices and + * slices have a consistent size. If + * they differ by a significant amount + * (~16MB) then report an error. + */ + if (!dontreport && + (vdev_size != -1ULL && + (labs(size - vdev_size) > + ZPOOL_FUZZ))) { + if (ret != NULL) + free(ret); + ret = NULL; + if (fatal) + vdev_error(gettext( + "%s contains devices of " + "different sizes\n"), + rep.zprl_type); + else + return (NULL); + dontreport = B_TRUE; + } + + type = childtype; + vdev_size = size; + } + } + + /* + * At this point, we have the replication of the last toplevel + * vdev in 'rep'. Compare it to 'lastrep' to see if its + * different. + */ + if (lastrep.zprl_type != NULL) { + if (strcmp(lastrep.zprl_type, rep.zprl_type) != 0) { + if (ret != NULL) + free(ret); + ret = NULL; + if (fatal) + vdev_error(gettext( + "mismatched replication level: " + "both %s and %s vdevs are " + "present\n"), + lastrep.zprl_type, rep.zprl_type); + else + return (NULL); + } else if (lastrep.zprl_parity != rep.zprl_parity) { + if (ret) + free(ret); + ret = NULL; + if (fatal) + vdev_error(gettext( + "mismatched replication level: " + "both %llu and %llu device parity " + "%s vdevs are present\n"), + lastrep.zprl_parity, + rep.zprl_parity, + rep.zprl_type); + else + return (NULL); + } else if (lastrep.zprl_children != rep.zprl_children) { + if (ret) + free(ret); + ret = NULL; + if (fatal) + vdev_error(gettext( + "mismatched replication level: " + "both %llu-way and %llu-way %s " + "vdevs are present\n"), + lastrep.zprl_children, + rep.zprl_children, + rep.zprl_type); + else + return (NULL); + } + } + lastrep = rep; + } + + if (ret != NULL) + *ret = rep; + + return (ret); +} + +/* + * Check the replication level of the vdev spec against the current pool. Calls + * get_replication() to make sure the new spec is self-consistent. If the pool + * has a consistent replication level, then we ignore any errors. Otherwise, + * report any difference between the two. + */ +static int +check_replication(nvlist_t *config, nvlist_t *newroot) +{ + nvlist_t **child; + uint_t children; + replication_level_t *current = NULL, *new; + int ret; + + /* + * If we have a current pool configuration, check to see if it's + * self-consistent. If not, simply return success. + */ + if (config != NULL) { + nvlist_t *nvroot; + + verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, + &nvroot) == 0); + if ((current = get_replication(nvroot, B_FALSE)) == NULL) + return (0); + } + /* + * for spares there may be no children, and therefore no + * replication level to check + */ + if ((nvlist_lookup_nvlist_array(newroot, ZPOOL_CONFIG_CHILDREN, + &child, &children) != 0) || (children == 0)) { + free(current); + return (0); + } + + /* + * If all we have is logs then there's no replication level to check. + */ + if (num_logs(newroot) == children) { + free(current); + return (0); + } + + /* + * Get the replication level of the new vdev spec, reporting any + * inconsistencies found. + */ + if ((new = get_replication(newroot, B_TRUE)) == NULL) { + free(current); + return (-1); + } + + /* + * Check to see if the new vdev spec matches the replication level of + * the current pool. + */ + ret = 0; + if (current != NULL) { + if (strcmp(current->zprl_type, new->zprl_type) != 0) { + vdev_error(gettext( + "mismatched replication level: pool uses %s " + "and new vdev is %s\n"), + current->zprl_type, new->zprl_type); + ret = -1; + } else if (current->zprl_parity != new->zprl_parity) { + vdev_error(gettext( + "mismatched replication level: pool uses %llu " + "device parity and new vdev uses %llu\n"), + current->zprl_parity, new->zprl_parity); + ret = -1; + } else if (current->zprl_children != new->zprl_children) { + vdev_error(gettext( + "mismatched replication level: pool uses %llu-way " + "%s and new vdev uses %llu-way %s\n"), + current->zprl_children, current->zprl_type, + new->zprl_children, new->zprl_type); + ret = -1; + } + } + + free(new); + if (current != NULL) + free(current); + + return (ret); +} + +/* + * Determine if the given path is a hot spare within the given configuration. + */ +static boolean_t +is_spare(nvlist_t *config, const char *path) +{ + int fd; + pool_state_t state; + char *name = NULL; + nvlist_t *label; + uint64_t guid, spareguid; + nvlist_t *nvroot; + nvlist_t **spares; + uint_t i, nspares; + boolean_t inuse; + + if ((fd = open(path, O_RDONLY)) < 0) + return (B_FALSE); + + if (zpool_in_use(g_zfs, fd, &state, &name, &inuse) != 0 || + !inuse || + state != POOL_STATE_SPARE || + zpool_read_label(fd, &label) != 0) { + free(name); + (void) close(fd); + return (B_FALSE); + } + free(name); + + (void) close(fd); + verify(nvlist_lookup_uint64(label, ZPOOL_CONFIG_GUID, &guid) == 0); + nvlist_free(label); + + verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, + &nvroot) == 0); + if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, + &spares, &nspares) == 0) { + for (i = 0; i < nspares; i++) { + verify(nvlist_lookup_uint64(spares[i], + ZPOOL_CONFIG_GUID, &spareguid) == 0); + if (spareguid == guid) + return (B_TRUE); + } + } + + return (B_FALSE); +} + +/* + * Go through and find any devices that are in use. We rely on libdiskmgt for + * the majority of this task. + */ +static int +check_in_use(nvlist_t *config, nvlist_t *nv, int force, int isreplacing, + int isspare) +{ + nvlist_t **child; + uint_t c, children; + char *type, *path; + int ret; + char buf[MAXPATHLEN]; + uint64_t wholedisk; + + verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) == 0); + + if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, + &child, &children) != 0) { + + verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) == 0); + + /* + * As a generic check, we look to see if this is a replace of a + * hot spare within the same pool. If so, we allow it + * regardless of what libdiskmgt or zpool_in_use() says. + */ + if (isreplacing) { + (void) strlcpy(buf, path, sizeof (buf)); + if (is_spare(config, buf)) + return (0); + } + + if (strcmp(type, VDEV_TYPE_DISK) == 0) + ret = check_provider(path, force, isspare); + + if (strcmp(type, VDEV_TYPE_FILE) == 0) + ret = check_file(path, force, isspare); + + return (ret); + } + + for (c = 0; c < children; c++) + if ((ret = check_in_use(config, child[c], force, + isreplacing, B_FALSE)) != 0) + return (ret); + + if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_SPARES, + &child, &children) == 0) + for (c = 0; c < children; c++) + if ((ret = check_in_use(config, child[c], force, + isreplacing, B_TRUE)) != 0) + return (ret); + + if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_L2CACHE, + &child, &children) == 0) + for (c = 0; c < children; c++) + if ((ret = check_in_use(config, child[c], force, + isreplacing, B_FALSE)) != 0) + return (ret); + + return (0); +} + +static const char * +is_grouping(const char *type, int *mindev) +{ + if (strcmp(type, "raidz") == 0 || strcmp(type, "raidz1") == 0) { + if (mindev != NULL) + *mindev = 2; + return (VDEV_TYPE_RAIDZ); + } + + if (strcmp(type, "raidz2") == 0) { + if (mindev != NULL) + *mindev = 3; + return (VDEV_TYPE_RAIDZ); + } + + if (strcmp(type, "mirror") == 0) { + if (mindev != NULL) + *mindev = 2; + return (VDEV_TYPE_MIRROR); + } + + if (strcmp(type, "spare") == 0) { + if (mindev != NULL) + *mindev = 1; + return (VDEV_TYPE_SPARE); + } + + if (strcmp(type, "log") == 0) { + if (mindev != NULL) + *mindev = 1; + return (VDEV_TYPE_LOG); + } + + if (strcmp(type, "cache") == 0) { + if (mindev != NULL) + *mindev = 1; + return (VDEV_TYPE_L2CACHE); + } + + return (NULL); +} + +/* + * Construct a syntactically valid vdev specification, + * and ensure that all devices and files exist and can be opened. + * Note: we don't bother freeing anything in the error paths + * because the program is just going to exit anyway. + */ +nvlist_t * +construct_spec(int argc, char **argv) +{ + nvlist_t *nvroot, *nv, **top, **spares, **l2cache; + int t, toplevels, mindev, nspares, nlogs, nl2cache; + const char *type; + uint64_t is_log; + boolean_t seen_logs; + + top = NULL; + toplevels = 0; + spares = NULL; + l2cache = NULL; + nspares = 0; + nlogs = 0; + nl2cache = 0; + is_log = B_FALSE; + seen_logs = B_FALSE; + + while (argc > 0) { + nv = NULL; + + /* + * If it's a mirror or raidz, the subsequent arguments are + * its leaves -- until we encounter the next mirror or raidz. + */ + if ((type = is_grouping(argv[0], &mindev)) != NULL) { + nvlist_t **child = NULL; + int c, children = 0; + + if (strcmp(type, VDEV_TYPE_SPARE) == 0) { + if (spares != NULL) { + (void) fprintf(stderr, + gettext("invalid vdev " + "specification: 'spare' can be " + "specified only once\n")); + return (NULL); + } + is_log = B_FALSE; + } + + if (strcmp(type, VDEV_TYPE_LOG) == 0) { + if (seen_logs) { + (void) fprintf(stderr, + gettext("invalid vdev " + "specification: 'log' can be " + "specified only once\n")); + return (NULL); + } + seen_logs = B_TRUE; + is_log = B_TRUE; + argc--; + argv++; + /* + * A log is not a real grouping device. + * We just set is_log and continue. + */ + continue; + } + + if (strcmp(type, VDEV_TYPE_L2CACHE) == 0) { + if (l2cache != NULL) { + (void) fprintf(stderr, + gettext("invalid vdev " + "specification: 'cache' can be " + "specified only once\n")); + return (NULL); + } + is_log = B_FALSE; + } + + if (is_log) { + if (strcmp(type, VDEV_TYPE_MIRROR) != 0) { + (void) fprintf(stderr, + gettext("invalid vdev " + "specification: unsupported 'log' " + "device: %s\n"), type); + return (NULL); + } + nlogs++; + } + + for (c = 1; c < argc; c++) { + if (is_grouping(argv[c], NULL) != NULL) + break; + children++; + child = realloc(child, + children * sizeof (nvlist_t *)); + if (child == NULL) + zpool_no_memory(); + if ((nv = make_leaf_vdev(argv[c], B_FALSE)) + == NULL) + return (NULL); + child[children - 1] = nv; + } + + if (children < mindev) { + (void) fprintf(stderr, gettext("invalid vdev " + "specification: %s requires at least %d " + "devices\n"), argv[0], mindev); + return (NULL); + } + + argc -= c; + argv += c; + + if (strcmp(type, VDEV_TYPE_SPARE) == 0) { + spares = child; + nspares = children; + continue; + } else if (strcmp(type, VDEV_TYPE_L2CACHE) == 0) { + l2cache = child; + nl2cache = children; + continue; + } else { + verify(nvlist_alloc(&nv, NV_UNIQUE_NAME, + 0) == 0); + verify(nvlist_add_string(nv, ZPOOL_CONFIG_TYPE, + type) == 0); + verify(nvlist_add_uint64(nv, + ZPOOL_CONFIG_IS_LOG, is_log) == 0); + if (strcmp(type, VDEV_TYPE_RAIDZ) == 0) { + verify(nvlist_add_uint64(nv, + ZPOOL_CONFIG_NPARITY, + mindev - 1) == 0); + } + verify(nvlist_add_nvlist_array(nv, + ZPOOL_CONFIG_CHILDREN, child, + children) == 0); + + for (c = 0; c < children; c++) + nvlist_free(child[c]); + free(child); + } + } else { + /* + * We have a device. Pass off to make_leaf_vdev() to + * construct the appropriate nvlist describing the vdev. + */ + if ((nv = make_leaf_vdev(argv[0], is_log)) == NULL) + return (NULL); + if (is_log) + nlogs++; + argc--; + argv++; + } + + toplevels++; + top = realloc(top, toplevels * sizeof (nvlist_t *)); + if (top == NULL) + zpool_no_memory(); + top[toplevels - 1] = nv; + } + + if (toplevels == 0 && nspares == 0 && nl2cache == 0) { + (void) fprintf(stderr, gettext("invalid vdev " + "specification: at least one toplevel vdev must be " + "specified\n")); + return (NULL); + } + + if (seen_logs && nlogs == 0) { + (void) fprintf(stderr, gettext("invalid vdev specification: " + "log requires at least 1 device\n")); + return (NULL); + } + + /* + * Finally, create nvroot and add all top-level vdevs to it. + */ + verify(nvlist_alloc(&nvroot, NV_UNIQUE_NAME, 0) == 0); + verify(nvlist_add_string(nvroot, ZPOOL_CONFIG_TYPE, + VDEV_TYPE_ROOT) == 0); + verify(nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, + top, toplevels) == 0); + if (nspares != 0) + verify(nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, + spares, nspares) == 0); + if (nl2cache != 0) + verify(nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE, + l2cache, nl2cache) == 0); + + for (t = 0; t < toplevels; t++) + nvlist_free(top[t]); + for (t = 0; t < nspares; t++) + nvlist_free(spares[t]); + for (t = 0; t < nl2cache; t++) + nvlist_free(l2cache[t]); + if (spares) + free(spares); + if (l2cache) + free(l2cache); + free(top); + + return (nvroot); +} + + +/* + * Get and validate the contents of the given vdev specification. This ensures + * that the nvlist returned is well-formed, that all the devices exist, and that + * they are not currently in use by any other known consumer. The 'poolconfig' + * parameter is the current configuration of the pool when adding devices + * existing pool, and is used to perform additional checks, such as changing the + * replication level of the pool. It can be 'NULL' to indicate that this is a + * new pool. The 'force' flag controls whether devices should be forcefully + * added, even if they appear in use. + */ +nvlist_t * +make_root_vdev(zpool_handle_t *zhp, int force, int check_rep, + boolean_t isreplacing, boolean_t dryrun, int argc, char **argv) +{ + nvlist_t *newroot; + nvlist_t *poolconfig = NULL; + is_force = force; + + /* + * Construct the vdev specification. If this is successful, we know + * that we have a valid specification, and that all devices can be + * opened. + */ + if ((newroot = construct_spec(argc, argv)) == NULL) + return (NULL); + + if (zhp && ((poolconfig = zpool_get_config(zhp, NULL)) == NULL)) + return (NULL); + + /* + * Validate each device to make sure that its not shared with another + * subsystem. We do this even if 'force' is set, because there are some + * uses (such as a dedicated dump device) that even '-f' cannot + * override. + */ + if (check_in_use(poolconfig, newroot, force, isreplacing, + B_FALSE) != 0) { + nvlist_free(newroot); + return (NULL); + } + + /* + * Check the replication level of the given vdevs and report any errors + * found. We include the existing pool spec, if any, as we need to + * catch changes against the existing replication level. + */ + if (check_rep && check_replication(poolconfig, newroot) != 0) { + nvlist_free(newroot); + return (NULL); + } + + return (newroot); +} |
