summaryrefslogtreecommitdiffstats
path: root/bpf-ipf.h
diff options
context:
space:
mode:
Diffstat (limited to 'bpf-ipf.h')
-rw-r--r--bpf-ipf.h450
1 files changed, 450 insertions, 0 deletions
diff --git a/bpf-ipf.h b/bpf-ipf.h
new file mode 100644
index 0000000..544455e
--- /dev/null
+++ b/bpf-ipf.h
@@ -0,0 +1,450 @@
+/*-
+ * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
+ * The Regents of the University of California. All rights reserved.
+ *
+ * This code is derived from the Stanford/CMU enet packet filter,
+ * (net/enet.c) distributed as part of 4.3BSD, and code contributed
+ * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
+ * Berkeley Laboratory.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the University of
+ * California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @(#)bpf.h 7.1 (Berkeley) 5/7/91
+ *
+ * @(#) $Header: /devel/CVS/IP-Filter/bpf-ipf.h,v 2.1 2002/10/26 12:14:26 darrenr Exp $ (LBL)
+ */
+
+#ifndef BPF_MAJOR_VERSION
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* BSD style release date */
+#define BPF_RELEASE 199606
+
+typedef int bpf_int32;
+typedef u_int bpf_u_int32;
+
+/*
+ * Alignment macros. BPF_WORDALIGN rounds up to the next
+ * even multiple of BPF_ALIGNMENT.
+ */
+#ifndef __NetBSD__
+#define BPF_ALIGNMENT sizeof(bpf_int32)
+#else
+#define BPF_ALIGNMENT sizeof(long)
+#endif
+#define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1))
+
+#define BPF_MAXINSNS 512
+#define BPF_MAXBUFSIZE 0x8000
+#define BPF_MINBUFSIZE 32
+
+/*
+ * Structure for BIOCSETF.
+ */
+struct bpf_program {
+ u_int bf_len;
+ struct bpf_insn *bf_insns;
+};
+
+/*
+ * Struct returned by BIOCGSTATS.
+ */
+struct bpf_stat {
+ u_int bs_recv; /* number of packets received */
+ u_int bs_drop; /* number of packets dropped */
+};
+
+/*
+ * Struct return by BIOCVERSION. This represents the version number of
+ * the filter language described by the instruction encodings below.
+ * bpf understands a program iff kernel_major == filter_major &&
+ * kernel_minor >= filter_minor, that is, if the value returned by the
+ * running kernel has the same major number and a minor number equal
+ * equal to or less than the filter being downloaded. Otherwise, the
+ * results are undefined, meaning an error may be returned or packets
+ * may be accepted haphazardly.
+ * It has nothing to do with the source code version.
+ */
+struct bpf_version {
+ u_short bv_major;
+ u_short bv_minor;
+};
+/* Current version number of filter architecture. */
+#define BPF_MAJOR_VERSION 1
+#define BPF_MINOR_VERSION 1
+
+/*
+ * BPF ioctls
+ *
+ * The first set is for compatibility with Sun's pcc style
+ * header files. If your using gcc, we assume that you
+ * have run fixincludes so the latter set should work.
+ */
+#if (defined(sun) || defined(ibm032)) && !defined(__GNUC__)
+#define BIOCGBLEN _IOR(B,102, u_int)
+#define BIOCSBLEN _IOWR(B,102, u_int)
+#define BIOCSETF _IOW(B,103, struct bpf_program)
+#define BIOCFLUSH _IO(B,104)
+#define BIOCPROMISC _IO(B,105)
+#define BIOCGDLT _IOR(B,106, u_int)
+#define BIOCGETIF _IOR(B,107, struct ifreq)
+#define BIOCSETIF _IOW(B,108, struct ifreq)
+#define BIOCSRTIMEOUT _IOW(B,109, struct timeval)
+#define BIOCGRTIMEOUT _IOR(B,110, struct timeval)
+#define BIOCGSTATS _IOR(B,111, struct bpf_stat)
+#define BIOCIMMEDIATE _IOW(B,112, u_int)
+#define BIOCVERSION _IOR(B,113, struct bpf_version)
+#define BIOCSTCPF _IOW(B,114, struct bpf_program)
+#define BIOCSUDPF _IOW(B,115, struct bpf_program)
+#else
+#define BIOCGBLEN _IOR('B',102, u_int)
+#define BIOCSBLEN _IOWR('B',102, u_int)
+#define BIOCSETF _IOW('B',103, struct bpf_program)
+#define BIOCFLUSH _IO('B',104)
+#define BIOCPROMISC _IO('B',105)
+#define BIOCGDLT _IOR('B',106, u_int)
+#define BIOCGETIF _IOR('B',107, struct ifreq)
+#define BIOCSETIF _IOW('B',108, struct ifreq)
+#define BIOCSRTIMEOUT _IOW('B',109, struct timeval)
+#define BIOCGRTIMEOUT _IOR('B',110, struct timeval)
+#define BIOCGSTATS _IOR('B',111, struct bpf_stat)
+#define BIOCIMMEDIATE _IOW('B',112, u_int)
+#define BIOCVERSION _IOR('B',113, struct bpf_version)
+#define BIOCSTCPF _IOW('B',114, struct bpf_program)
+#define BIOCSUDPF _IOW('B',115, struct bpf_program)
+#endif
+
+/*
+ * Structure prepended to each packet.
+ */
+struct bpf_hdr {
+ struct timeval bh_tstamp; /* time stamp */
+ bpf_u_int32 bh_caplen; /* length of captured portion */
+ bpf_u_int32 bh_datalen; /* original length of packet */
+ u_short bh_hdrlen; /* length of bpf header (this struct
+ plus alignment padding) */
+};
+/*
+ * Because the structure above is not a multiple of 4 bytes, some compilers
+ * will insist on inserting padding; hence, sizeof(struct bpf_hdr) won't work.
+ * Only the kernel needs to know about it; applications use bh_hdrlen.
+ */
+#if defined(KERNEL) || defined(_KERNEL)
+#define SIZEOF_BPF_HDR 18
+#endif
+
+/*
+ * Data-link level type codes.
+ */
+
+/*
+ * These are the types that are the same on all platforms; on other
+ * platforms, a <net/bpf.h> should be supplied that defines the additional
+ * DLT_* codes appropriately for that platform (the BSDs, for example,
+ * should not just pick up this version of "bpf.h"; they should also define
+ * the additional DLT_* codes used by their kernels, as well as the values
+ * defined here - and, if the values they use for particular DLT_ types
+ * differ from those here, they should use their values, not the ones
+ * here).
+ */
+#define DLT_NULL 0 /* no link-layer encapsulation */
+#define DLT_EN10MB 1 /* Ethernet (10Mb) */
+#define DLT_EN3MB 2 /* Experimental Ethernet (3Mb) */
+#define DLT_AX25 3 /* Amateur Radio AX.25 */
+#define DLT_PRONET 4 /* Proteon ProNET Token Ring */
+#define DLT_CHAOS 5 /* Chaos */
+#define DLT_IEEE802 6 /* IEEE 802 Networks */
+#define DLT_ARCNET 7 /* ARCNET */
+#define DLT_SLIP 8 /* Serial Line IP */
+#define DLT_PPP 9 /* Point-to-point Protocol */
+#define DLT_FDDI 10 /* FDDI */
+
+/*
+ * These are values from the traditional libpcap "bpf.h".
+ * Ports of this to particular platforms should replace these definitions
+ * with the ones appropriate to that platform, if the values are
+ * different on that platform.
+ */
+#define DLT_ATM_RFC1483 11 /* LLC/SNAP encapsulated atm */
+#define DLT_RAW 12 /* raw IP */
+
+/*
+ * These are values from BSD/OS's "bpf.h".
+ * These are not the same as the values from the traditional libpcap
+ * "bpf.h"; however, these values shouldn't be generated by any
+ * OS other than BSD/OS, so the correct values to use here are the
+ * BSD/OS values.
+ *
+ * Platforms that have already assigned these values to other
+ * DLT_ codes, however, should give these codes the values
+ * from that platform, so that programs that use these codes will
+ * continue to compile - even though they won't correctly read
+ * files of these types.
+ */
+#ifdef __NetBSD__
+#ifndef DLT_SLIP_BSDOS
+#define DLT_SLIP_BSDOS 13 /* BSD/OS Serial Line IP */
+#define DLT_PPP_BSDOS 14 /* BSD/OS Point-to-point Protocol */
+#endif
+#else
+#define DLT_SLIP_BSDOS 15 /* BSD/OS Serial Line IP */
+#define DLT_PPP_BSDOS 16 /* BSD/OS Point-to-point Protocol */
+#endif
+
+#define DLT_ATM_CLIP 19 /* Linux Classical-IP over ATM */
+
+/*
+ * These values are defined by NetBSD; other platforms should refrain from
+ * using them for other purposes, so that NetBSD savefiles with link
+ * types of 50 or 51 can be read as this type on all platforms.
+ */
+#define DLT_PPP_SERIAL 50 /* PPP over serial with HDLC encapsulation */
+#define DLT_PPP_ETHER 51 /* PPP over Ethernet */
+
+/*
+ * Values between 100 and 103 are used in capture file headers as
+ * link-layer types corresponding to DLT_ types that differ
+ * between platforms; don't use those values for new DLT_ new types.
+ */
+
+/*
+ * This value was defined by libpcap 0.5; platforms that have defined
+ * it with a different value should define it here with that value -
+ * a link type of 104 in a save file will be mapped to DLT_C_HDLC,
+ * whatever value that happens to be, so programs will correctly
+ * handle files with that link type regardless of the value of
+ * DLT_C_HDLC.
+ *
+ * The name DLT_C_HDLC was used by BSD/OS; we use that name for source
+ * compatibility with programs written for BSD/OS.
+ *
+ * libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well,
+ * for source compatibility with programs written for libpcap 0.5.
+ */
+#define DLT_C_HDLC 104 /* Cisco HDLC */
+#define DLT_CHDLC DLT_C_HDLC
+
+#define DLT_IEEE802_11 105 /* IEEE 802.11 wireless */
+
+/*
+ * Values between 106 and 107 are used in capture file headers as
+ * link-layer types corresponding to DLT_ types that might differ
+ * between platforms; don't use those values for new DLT_ new types.
+ */
+
+/*
+ * OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except
+ * that the AF_ type in the link-layer header is in network byte order.
+ *
+ * OpenBSD defines it as 12, but that collides with DLT_RAW, so we
+ * define it as 108 here. If OpenBSD picks up this file, it should
+ * define DLT_LOOP as 12 in its version, as per the comment above -
+ * and should not use 108 as a DLT_ value.
+ */
+#define DLT_LOOP 108
+
+/*
+ * Values between 109 and 112 are used in capture file headers as
+ * link-layer types corresponding to DLT_ types that might differ
+ * between platforms; don't use those values for new DLT_ types
+ * other than the corresponding DLT_ types.
+ */
+
+/*
+ * This is for Linux cooked sockets.
+ */
+#define DLT_LINUX_SLL 113
+
+/*
+ * Apple LocalTalk hardware.
+ */
+#define DLT_LTALK 114
+
+/*
+ * Acorn Econet.
+ */
+#define DLT_ECONET 115
+
+/*
+ * Reserved for use with OpenBSD ipfilter.
+ */
+#define DLT_IPFILTER 116
+
+/*
+ * Reserved for use in capture-file headers as a link-layer type
+ * corresponding to OpenBSD DLT_PFLOG; DLT_PFLOG is 17 in OpenBSD,
+ * but that's DLT_LANE8023 in SuSE 6.3, so we can't use 17 for it
+ * in capture-file headers.
+ */
+#define DLT_PFLOG 117
+
+/*
+ * Registered for Cisco-internal use.
+ */
+#define DLT_CISCO_IOS 118
+
+/*
+ * Reserved for 802.11 cards using the Prism II chips, with a link-layer
+ * header including Prism monitor mode information plus an 802.11
+ * header.
+ */
+#define DLT_PRISM_HEADER 119
+
+/*
+ * Reserved for Aironet 802.11 cards, with an Aironet link-layer header
+ * (see Doug Ambrisko's FreeBSD patches).
+ */
+#define DLT_AIRONET_HEADER 120
+
+/*
+ * Reserved for Siemens HiPath HDLC.
+ */
+#define DLT_HHDLC 121
+
+/*
+ * Reserved for RFC 2625 IP-over-Fibre Channel, as per a request from
+ * Don Lee <donlee@cray.com>.
+ *
+ * This is not for use with raw Fibre Channel, where the link-layer
+ * header starts with a Fibre Channel frame header; it's for IP-over-FC,
+ * where the link-layer header starts with an RFC 2625 Network_Header
+ * field.
+ */
+#define DLT_IP_OVER_FC 122
+
+/*
+ * The instruction encodings.
+ */
+/* instruction classes */
+#define BPF_CLASS(code) ((code) & 0x07)
+#define BPF_LD 0x00
+#define BPF_LDX 0x01
+#define BPF_ST 0x02
+#define BPF_STX 0x03
+#define BPF_ALU 0x04
+#define BPF_JMP 0x05
+#define BPF_RET 0x06
+#define BPF_MISC 0x07
+
+/* ld/ldx fields */
+#define BPF_SIZE(code) ((code) & 0x18)
+#define BPF_W 0x00
+#define BPF_H 0x08
+#define BPF_B 0x10
+#define BPF_MODE(code) ((code) & 0xe0)
+#define BPF_IMM 0x00
+#define BPF_ABS 0x20
+#define BPF_IND 0x40
+#define BPF_MEM 0x60
+#define BPF_LEN 0x80
+#define BPF_MSH 0xa0
+
+/* alu/jmp fields */
+#define BPF_OP(code) ((code) & 0xf0)
+#define BPF_ADD 0x00
+#define BPF_SUB 0x10
+#define BPF_MUL 0x20
+#define BPF_DIV 0x30
+#define BPF_OR 0x40
+#define BPF_AND 0x50
+#define BPF_LSH 0x60
+#define BPF_RSH 0x70
+#define BPF_NEG 0x80
+#define BPF_JA 0x00
+#define BPF_JEQ 0x10
+#define BPF_JGT 0x20
+#define BPF_JGE 0x30
+#define BPF_JSET 0x40
+#define BPF_SRC(code) ((code) & 0x08)
+#define BPF_K 0x00
+#define BPF_X 0x08
+
+/* ret - BPF_K and BPF_X also apply */
+#define BPF_RVAL(code) ((code) & 0x18)
+#define BPF_A 0x10
+
+/* misc */
+#define BPF_MISCOP(code) ((code) & 0xf8)
+#define BPF_TAX 0x00
+#define BPF_TXA 0x80
+
+/*
+ * The instruction data structure.
+ */
+struct bpf_insn {
+ u_short code;
+ u_char jt;
+ u_char jf;
+ bpf_int32 k;
+};
+
+/*
+ * Macros for insn array initializers.
+ */
+#define BPF_STMT(code, k) { (u_short)(code), 0, 0, k }
+#define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k }
+
+#if defined(BSD) && (defined(KERNEL) || defined(_KERNEL))
+/*
+ * Systems based on non-BSD kernels don't have ifnet's (or they don't mean
+ * anything if it is in <net/if.h>) and won't work like this.
+ */
+# if __STDC__
+extern void bpf_tap(struct ifnet *, u_char *, u_int);
+extern void bpf_mtap(struct ifnet *, struct mbuf *);
+extern void bpfattach(struct ifnet *, u_int, u_int);
+extern void bpfilterattach(int);
+# else
+extern void bpf_tap();
+extern void bpf_mtap();
+extern void bpfattach();
+extern void bpfilterattach();
+# endif /* __STDC__ */
+#endif /* BSD && (_KERNEL || KERNEL) */
+#if __STDC__ || defined(__cplusplus)
+extern int bpf_validate(struct bpf_insn *, int);
+extern u_int bpf_filter(struct bpf_insn *, u_char *, u_int, u_int);
+#else
+extern int bpf_validate();
+extern u_int bpf_filter();
+#endif
+
+/*
+ * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST).
+ */
+#define BPF_MEMWORDS 16
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
OpenPOWER on IntegriCloud