diff options
Diffstat (limited to 'bin/ps/ps.1')
| -rw-r--r-- | bin/ps/ps.1 | 780 |
1 files changed, 780 insertions, 0 deletions
diff --git a/bin/ps/ps.1 b/bin/ps/ps.1 new file mode 100644 index 0000000..e00d313 --- /dev/null +++ b/bin/ps/ps.1 @@ -0,0 +1,780 @@ +.\"- +.\" Copyright (c) 1980, 1990, 1991, 1993, 1994 +.\" The Regents of the University of California. All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" 4. Neither the name of the University nor the names of its contributors +.\" may be used to endorse or promote products derived from this software +.\" without specific prior written permission. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" @(#)ps.1 8.3 (Berkeley) 4/18/94 +.\" $FreeBSD$ +.\" +.Dd December 1, 2015 +.Dt PS 1 +.Os +.Sh NAME +.Nm ps +.Nd process status +.Sh SYNOPSIS +.Nm +.Op Fl -libxo +.Op Fl aCcdefHhjlmrSTuvwXxZ +.Op Fl O Ar fmt | Fl o Ar fmt +.Op Fl G Ar gid Ns Op , Ns Ar gid Ns Ar ... +.Op Fl J Ar jid Ns Op , Ns Ar jid Ns Ar ... +.Op Fl M Ar core +.Op Fl N Ar system +.Op Fl p Ar pid Ns Op , Ns Ar pid Ns Ar ... +.Op Fl t Ar tty Ns Op , Ns Ar tty Ns Ar ... +.Op Fl U Ar user Ns Op , Ns Ar user Ns Ar ... +.Nm +.Op Fl -libxo +.Op Fl L +.Sh DESCRIPTION +The +.Nm +utility +displays a header line, followed by lines containing information about +all of your +processes that have controlling terminals. +If the +.Fl x +options is specified, +.Nm +will also display processes that do not have controlling terminals. +.Pp +A different set of processes can be selected for display by using any +combination of the +.Fl a , G , J , p , T , t , +and +.Fl U +options. +If more than one of these options are given, then +.Nm +will select all processes which are matched by at least one of the +given options. +.Pp +For the processes which have been selected for display, +.Nm +will usually display one line per process. +The +.Fl H +option may result in multiple output lines (one line per thread) for +some processes. +By default all of these output lines are sorted first by controlling +terminal, then by process ID. +The +.Fl m , r , u , +and +.Fl v +options will change the sort order. +If more than one sorting option was given, then the selected processes +will be sorted by the last sorting option which was specified. +.Pp +For the processes which have been selected for display, the information +to display is selected based on a set of keywords (see the +.Fl L , O , +and +.Fl o +options). +The default output format includes, for each process, the process' ID, +controlling terminal, state, CPU time (including both user and system time) +and associated command. +.Pp +The options are as follows: +.Bl -tag -width indent +.It Fl -libxo +Generate output via +.Xr libxo 3 +in a selection of different human and machine readable formats. +See +.Xr xo_parse_args 3 +for details on command line arguments. +.It Fl a +Display information about other users' processes as well as your own. +If the +.Va security.bsd.see_other_uids +sysctl is set to zero, this option is honored only if the UID of the user is 0. +.It Fl c +Change the +.Dq command +column output to just contain the executable name, +rather than the full command line. +.It Fl C +Change the way the CPU percentage is calculated by using a +.Dq raw +CPU calculation that ignores +.Dq resident +time (this normally has +no effect). +.It Fl d +Arrange processes into descendancy order and prefix each command with +indentation text showing sibling and parent/child relationships. +If either of the +.Fl m +and +.Fl r +options are also used, they control how sibling processes are sorted +relative to each other. +Note that this option has no effect if the +.Dq command +column is not the last column displayed. +.It Fl e +Display the environment as well. +.It Fl f +Show command-line and environment information about swapped out processes. +This option is honored only if the UID of the user is 0. +.It Fl G +Display information about processes which are running with the specified +real group IDs. +.It Fl H +Show all of the +.Em kernel visible +threads associated with each process. +Depending on the threading package that +is in use, this may show only the process, only the kernel scheduled entities, +or all of the process threads. +.It Fl h +Repeat the information header as often as necessary to guarantee one +header per page of information. +.It Fl j +Print information associated with the following keywords: +.Cm user , pid , ppid , pgid , sid , jobc , state , tt , time , +and +.Cm command . +.It Fl J +Display information about processes which match the specified jail IDs. +This may be either the +.Cm jid +or +.Cm name +of the jail. +Use +.Fl J +.Sy 0 +to display only host processes. +This flag implies +.Fl x +by default. +.It Fl L +List the set of keywords available for the +.Fl O +and +.Fl o +options. +.It Fl l +Display information associated with the following keywords: +.Cm uid , pid , ppid , cpu , pri , nice , vsz , rss , mwchan , state , +.Cm tt , time , +and +.Cm command . +.It Fl M +Extract values associated with the name list from the specified core +instead of the currently running system. +.It Fl m +Sort by memory usage, instead of the combination of controlling +terminal and process ID. +.It Fl N +Extract the name list from the specified system instead of the default, +which is the kernel image the system has booted from. +.It Fl O +Add the information associated with the space or comma separated list +of keywords specified, after the process ID, +in the default information +display. +Keywords may be appended with an equals +.Pq Ql = +sign and a string. +This causes the printed header to use the specified string instead of +the standard header. +.It Fl o +Display information associated with the space or comma separated +list of keywords specified. +The last keyword in the list may be appended with an equals +.Pq Ql = +sign and a string that spans the rest of the argument, and can contain +space and comma characters. +This causes the printed header to use the specified string instead of +the standard header. +Multiple keywords may also be given in the form of more than one +.Fl o +option. +So the header texts for multiple keywords can be changed. +If all keywords have empty header texts, no header line is written. +.It Fl p +Display information about processes which match the specified process IDs. +.It Fl r +Sort by current CPU usage, instead of the combination of controlling +terminal and process ID. +.It Fl S +Change the way the process times, namely cputime, systime, and usertime, +are calculated by summing all exited children to their parent process. +.It Fl T +Display information about processes attached to the device associated +with the standard input. +.It Fl t +Display information about processes attached to the specified terminal +devices. +Full pathnames, as well as abbreviations (see explanation of the +.Cm tt +keyword) can be specified. +.It Fl U +Display the processes belonging to the specified usernames. +.It Fl u +Display information associated with the following keywords: +.Cm user , pid , %cpu , %mem , vsz , rss , tt , state , start , time , +and +.Cm command . +The +.Fl u +option implies the +.Fl r +option. +.It Fl v +Display information associated with the following keywords: +.Cm pid , state , time , sl , re , pagein , vsz , rss , lim , tsiz , +.Cm %cpu , %mem , +and +.Cm command . +The +.Fl v +option implies the +.Fl m +option. +.It Fl w +Use 132 columns to display information, instead of the default which +is your window size. +If the +.Fl w +option is specified more than once, +.Nm +will use as many columns as necessary without regard for your window size. +Note that this option has no effect if the +.Dq command +column is not the last column displayed. +.It Fl X +When displaying processes matched by other options, skip any processes +which do not have a controlling terminal. +This is the default behaviour. +.It Fl x +When displaying processes matched by other options, include processes +which do not have a controlling terminal. +This is the opposite of the +.Fl X +option. +If both +.Fl X +and +.Fl x +are specified in the same command, then +.Nm +will use the one which was specified last. +.It Fl Z +Add +.Xr mac 4 +label to the list of keywords for which +.Nm +will display information. +.El +.Pp +A complete list of the available keywords are listed below. +Some of these keywords are further specified as follows: +.Bl -tag -width lockname +.It Cm %cpu +The CPU utilization of the process; this is a decaying average over up to +a minute of previous (real) time. +Since the time base over which this is computed varies (since processes may +be very young) it is possible for the sum of all +.Cm %cpu +fields to exceed 100%. +.It Cm %mem +The percentage of real memory used by this process. +.It Cm class +Login class associated with the process. +.It Cm flags +The flags associated with the process as in +the include file +.In sys/proc.h : +.Bl -column P_SINGLE_BOUNDARY 0x40000000 +.It Dv "P_ADVLOCK" Ta No "0x00001" Ta "Process may hold a POSIX advisory lock" +.It Dv "P_CONTROLT" Ta No "0x00002" Ta "Has a controlling terminal" +.It Dv "P_KTHREAD" Ta No "0x00004" Ta "Kernel thread" +.It Dv "P_FOLLOWFORK" Ta No "0x00008" Ta "Attach debugger to new children" +.It Dv "P_PPWAIT" Ta No "0x00010" Ta "Parent is waiting for child to exec/exit" +.It Dv "P_PROFIL" Ta No "0x00020" Ta "Has started profiling" +.It Dv "P_STOPPROF" Ta No "0x00040" Ta "Has thread in requesting to stop prof" +.It Dv "P_HADTHREADS" Ta No "0x00080" Ta "Has had threads (no cleanup shortcuts)" +.It Dv "P_SUGID" Ta No "0x00100" Ta "Had set id privileges since last exec" +.It Dv "P_SYSTEM" Ta No "0x00200" Ta "System proc: no sigs, stats or swapping" +.It Dv "P_SINGLE_EXIT" Ta No "0x00400" Ta "Threads suspending should exit, not wait" +.It Dv "P_TRACED" Ta No "0x00800" Ta "Debugged process being traced" +.It Dv "P_WAITED" Ta No "0x01000" Ta "Someone is waiting for us" +.It Dv "P_WEXIT" Ta No "0x02000" Ta "Working on exiting" +.It Dv "P_EXEC" Ta No "0x04000" Ta "Process called exec" +.It Dv "P_WKILLED" Ta No "0x08000" Ta "Killed, shall go to kernel/user boundary ASAP" +.It Dv "P_CONTINUED" Ta No "0x10000" Ta "Proc has continued from a stopped state" +.It Dv "P_STOPPED_SIG" Ta No "0x20000" Ta "Stopped due to SIGSTOP/SIGTSTP" +.It Dv "P_STOPPED_TRACE" Ta No "0x40000" Ta "Stopped because of tracing" +.It Dv "P_STOPPED_SINGLE" Ta No "0x80000" Ta "Only one thread can continue" +.It Dv "P_PROTECTED" Ta No "0x100000" Ta "Do not kill on memory overcommit" +.It Dv "P_SIGEVENT" Ta No "0x200000" Ta "Process pending signals changed" +.It Dv "P_SINGLE_BOUNDARY" Ta No "0x400000" Ta "Threads should suspend at user boundary" +.It Dv "P_HWPMC" Ta No "0x800000" Ta "Process is using HWPMCs" +.It Dv "P_JAILED" Ta No "0x1000000" Ta "Process is in jail" +.It Dv "P_TOTAL_STOP" Ta No "0x2000000" Ta "Stopped for system suspend" +.It Dv "P_INEXEC" Ta No "0x4000000" Ta "Process is in execve()" +.It Dv "P_STATCHILD" Ta No "0x8000000" Ta "Child process stopped or exited" +.It Dv "P_INMEM" Ta No "0x10000000" Ta "Loaded into memory" +.It Dv "P_SWAPPINGOUT" Ta No "0x20000000" Ta "Process is being swapped out" +.It Dv "P_SWAPPINGIN" Ta No "0x40000000" Ta "Process is being swapped in" +.It Dv "P_PPTRACE" Ta No "0x80000000" Ta "Vforked child issued ptrace(PT_TRACEME)" +.El +.It Cm flags2 +The flags kept in +.Va p_flag2 +associated with the process as in +the include file +.In sys/proc.h : +.Bl -column P2_INHERIT_PROTECTED 0x00000001 +.It Dv "P2_INHERIT_PROTECTED" Ta No "0x00000001" Ta "New children get P_PROTECTED" +.It Dv "P2_NOTRACE" Ta No "0x00000002" Ta "No ptrace(2) attach or coredumps" +.It Dv "P2_NOTRACE_EXEC" Ta No "0x00000004" Ta "Keep P2_NOPTRACE on exec(2)" +.It Dv "P2_AST_SU" Ta No "0x00000008" Ta "Handles SU ast for kthreads" +.El +.It Cm label +The MAC label of the process. +.It Cm lim +The soft limit on memory used, specified via a call to +.Xr setrlimit 2 . +.It Cm lstart +The exact time the command started, using the +.Ql %c +format described in +.Xr strftime 3 . +.It Cm lockname +The name of the lock that the process is currently blocked on. +If the name is invalid or unknown, then +.Dq ???\& +is displayed. +.It Cm logname +The login name associated with the session the process is in (see +.Xr getlogin 2 ) . +.It Cm mwchan +The event name if the process is blocked normally, or the lock name if +the process is blocked on a lock. +See the wchan and lockname keywords +for details. +.It Cm nice +The process scheduling increment (see +.Xr setpriority 2 ) . +.It Cm rss +the real memory (resident set) size of the process (in 1024 byte units). +.It Cm start +The time the command started. +If the command started less than 24 hours ago, the start time is +displayed using the +.Dq Li %H:%M +format described in +.Xr strftime 3 . +If the command started less than 7 days ago, the start time is +displayed using the +.Dq Li %a%H +format. +Otherwise, the start time is displayed using the +.Dq Li %e%b%y +format. +.It Cm state +The state is given by a sequence of characters, for example, +.Dq Li RWNA . +The first character indicates the run state of the process: +.Pp +.Bl -tag -width indent -compact +.It Li D +Marks a process in disk (or other short term, uninterruptible) wait. +.It Li I +Marks a process that is idle (sleeping for longer than about 20 seconds). +.It Li L +Marks a process that is waiting to acquire a lock. +.It Li R +Marks a runnable process. +.It Li S +Marks a process that is sleeping for less than about 20 seconds. +.It Li T +Marks a stopped process. +.It Li W +Marks an idle interrupt thread. +.It Li Z +Marks a dead process (a +.Dq zombie ) . +.El +.Pp +Additional characters after these, if any, indicate additional state +information: +.Pp +.Bl -tag -width indent -compact +.It Li + +The process is in the foreground process group of its control terminal. +.It Li < +The process has raised CPU scheduling priority. +.It Li E +The process is trying to exit. +.It Li J +Marks a process which is in +.Xr jail 2 . +The hostname of the prison can be found in +.Pa /proc/ Ns Ao Ar pid Ac Ns Pa /status . +.It Li L +The process has pages locked in core (for example, for raw +.Tn I/O ) . +.It Li N +The process has reduced CPU scheduling priority (see +.Xr setpriority 2 ) . +.It Li s +The process is a session leader. +.It Li V +The process' parent is suspended during a +.Xr vfork 2 , +waiting for the process to exec or exit. +.It Li W +The process is swapped out. +.It Li X +The process is being traced or debugged. +.El +.It Cm tt +An abbreviation for the pathname of the controlling terminal, if any. +The abbreviation consists of the three letters following +.Pa /dev/tty , +or, for pseudo-terminals, the corresponding entry in +.Pa /dev/pts . +This is followed by a +.Ql - +if the process can no longer reach that +controlling terminal (i.e., it has been revoked). +A +.Ql - +without a preceding two letter abbreviation or pseudo-terminal device number +indicates a process which never had a controlling terminal. +The full pathname of the controlling terminal is available via the +.Cm tty +keyword. +.It Cm wchan +The event (an address in the system) on which a process waits. +When printed numerically, the initial part of the address is +trimmed off and the result is printed in hex, for example, 0x80324000 prints +as 324000. +.El +.Pp +When printing using the command keyword, a process that has exited and +has a parent that has not yet waited for the process (in other words, a zombie) +is listed as +.Dq Li <defunct> , +and a process which is blocked while trying +to exit is listed as +.Dq Li <exiting> . +If the arguments cannot be located (usually because it has not been set, as is +the case of system processes and/or kernel threads) the command name is printed +within square brackets. +The +.Nm +utility first tries to obtain the arguments cached by the kernel (if they were +shorter than the value of the +.Va kern.ps_arg_cache_limit +sysctl). +The process can change the arguments shown with +.Xr setproctitle 3 . +Otherwise, +.Nm +makes an educated guess as to the file name and arguments given when the +process was created by examining memory or the swap area. +The method is inherently somewhat unreliable and in any event a process +is entitled to destroy this information. +The ucomm (accounting) keyword can, however, be depended on. +If the arguments are unavailable or do not agree with the ucomm keyword, +the value for the ucomm keyword is appended to the arguments in parentheses. +.Sh KEYWORDS +The following is a complete list of the available keywords and their +meanings. +Several of them have aliases (keywords which are synonyms). +.Pp +.Bl -tag -width ".Cm sigignore" -compact +.It Cm %cpu +percentage CPU usage (alias +.Cm pcpu ) +.It Cm %mem +percentage memory usage (alias +.Cm pmem ) +.It Cm acflag +accounting flag (alias +.Cm acflg ) +.It Cm args +command and arguments +.It Cm class +login class +.It Cm comm +command +.It Cm command +command and arguments +.It Cm cow +number of copy-on-write faults +.It Cm cpu +short-term CPU usage factor (for scheduling) +.It Cm dsiz +data size (in Kbytes) +.It Cm emul +system-call emulation environment +.It Cm etime +elapsed running time, format +.Op days- Ns +.Op hours: Ns +minutes:seconds. +.It Cm etimes +elapsed running time, in decimal integer seconds +.It Cm fib +default FIB number, see +.Xr setfib 1 +.It Cm flags +the process flags, in hexadecimal (alias +.Cm f ) +.It Cm flags2 +the additional set of process flags, in hexadecimal (alias +.Cm f2 ) +.It Cm gid +effective group ID (alias +.Cm egid ) +.It Cm group +group name (from egid) (alias +.Cm egroup ) +.It Cm inblk +total blocks read (alias +.Cm inblock ) +.It Cm jid +jail ID +.It Cm jobc +job control count +.It Cm ktrace +tracing flags +.It Cm label +MAC label +.It Cm lim +memoryuse limit +.It Cm lockname +lock currently blocked on (as a symbolic name) +.It Cm logname +login name of user who started the session +.It Cm lstart +time started +.It Cm lwp +process thread-id +.It Cm majflt +total page faults +.It Cm minflt +total page reclaims +.It Cm msgrcv +total messages received (reads from pipes/sockets) +.It Cm msgsnd +total messages sent (writes on pipes/sockets) +.It Cm mwchan +wait channel or lock currently blocked on +.It Cm nice +nice value (alias +.Cm ni ) +.It Cm nivcsw +total involuntary context switches +.It Cm nlwp +number of threads tied to a process +.It Cm nsigs +total signals taken (alias +.Cm nsignals ) +.It Cm nswap +total swaps in/out +.It Cm nvcsw +total voluntary context switches +.It Cm nwchan +wait channel (as an address) +.It Cm oublk +total blocks written (alias +.Cm oublock ) +.It Cm paddr +process pointer +.It Cm pagein +pageins (same as majflt) +.It Cm pgid +process group number +.It Cm pid +process ID +.It Cm ppid +parent process ID +.It Cm pri +scheduling priority +.It Cm re +core residency time (in seconds; 127 = infinity) +.It Cm rgid +real group ID +.It Cm rgroup +group name (from rgid) +.It Cm rss +resident set size +.It Cm rtprio +realtime priority (101 = not a realtime process) +.It Cm ruid +real user ID +.It Cm ruser +user name (from ruid) +.It Cm sid +session ID +.It Cm sig +pending signals (alias +.Cm pending ) +.It Cm sigcatch +caught signals (alias +.Cm caught ) +.It Cm sigignore +ignored signals (alias +.Cm ignored ) +.It Cm sigmask +blocked signals (alias +.Cm blocked ) +.It Cm sl +sleep time (in seconds; 127 = infinity) +.It Cm ssiz +stack size (in Kbytes) +.It Cm start +time started +.It Cm state +symbolic process state (alias +.Cm stat ) +.It Cm svgid +saved gid from a setgid executable +.It Cm svuid +saved UID from a setuid executable +.It Cm systime +accumulated system CPU time +.It Cm tdaddr +thread address +.It Cm tdev +control terminal device number +.It Cm time +accumulated CPU time, user + system (alias +.Cm cputime ) +.It Cm tpgid +control terminal process group ID +.It Cm tracer +tracer process ID +.\".It Cm trss +.\"text resident set size (in Kbytes) +.It Cm tsid +control terminal session ID +.It Cm tsiz +text size (in Kbytes) +.It Cm tt +control terminal name (two letter abbreviation) +.It Cm tty +full name of control terminal +.It Cm ucomm +name to be used for accounting +.It Cm uid +effective user ID (alias +.Cm euid ) +.It Cm upr +scheduling priority on return from system call (alias +.Cm usrpri ) +.It Cm uprocp +process pointer +.It Cm user +user name (from UID) +.It Cm usertime +accumulated user CPU time +.It Cm vsz +virtual size in Kbytes (alias +.Cm vsize ) +.It Cm wchan +wait channel (as a symbolic name) +.It Cm xstat +exit or stop status (valid only for stopped or zombie process) +.El +.Pp +Note that the +.Cm pending +column displays bitmask of signals pending in the process queue when +.Fl H +option is not specified, otherwise the per-thread queue of pending signals +is shown. +.Sh ENVIRONMENT +The following environment variables affect the execution of +.Nm : +.Bl -tag -width ".Ev COLUMNS" +.It Ev COLUMNS +If set, specifies the user's preferred output width in column positions. +By default, +.Nm +attempts to automatically determine the terminal width. +.El +.Sh FILES +.Bl -tag -width ".Pa /boot/kernel/kernel" -compact +.It Pa /boot/kernel/kernel +default system namelist +.El +.Sh EXAMPLES +Display information on all system processes: +.Pp +.Dl $ ps -auxw +.Sh SEE ALSO +.Xr kill 1 , +.Xr pgrep 1 , +.Xr pkill 1 , +.Xr procstat 1 , +.Xr w 1 , +.Xr kvm 3 , +.Xr libxo 3 , +.Xr strftime 3 , +.Xr xo_parse_args 3 , +.Xr mac 4 , +.Xr procfs 5 , +.Xr pstat 8 , +.Xr sysctl 8 , +.Xr mutex 9 +.Sh STANDARDS +For historical reasons, the +.Nm +utility under +.Fx +supports a different set of options from what is described by +.St -p1003.2 , +and what is supported on +.No non- Ns Bx +operating systems. +.Sh HISTORY +The +.Nm +command appeared in +.At v4 . +.Sh BUGS +Since +.Nm +cannot run faster than the system and is run as any other scheduled +process, the information it displays can never be exact. +.Pp +The +.Nm +utility does not correctly display argument lists containing multibyte +characters. |
