diff options
-rw-r--r-- | release/picobsd/dial/conf/PICOBSD | 80 | ||||
-rw-r--r-- | release/picobsd/isp/conf/PICOBSD | 106 | ||||
-rw-r--r-- | release/picobsd/net/conf/PICOBSD | 82 | ||||
-rw-r--r-- | release/picobsd/router/conf/PICOBSD | 82 |
4 files changed, 181 insertions, 169 deletions
diff --git a/release/picobsd/dial/conf/PICOBSD b/release/picobsd/dial/conf/PICOBSD index 574a61f..61d851f 100644 --- a/release/picobsd/dial/conf/PICOBSD +++ b/release/picobsd/dial/conf/PICOBSD @@ -1,82 +1,82 @@ # -# $Id: PICOBSD,v 1.5 1999/01/14 23:15:39 abial Exp $ +# $Id: PICOBSD,v 1.5.2.1 1999/02/07 22:19:52 abial Exp $ # -machine "i386" -cpu "I386_CPU" -cpu "I486_CPU" -cpu "I586_CPU" -cpu "I686_CPU" +machine i386 +cpu I386_CPU +cpu I486_CPU +cpu I586_CPU +cpu I686_CPU ident PICOBSD maxusers 3 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem -options FFS_ROOT -options MFS +options FFS_ROOT #FFS usable as root device [keep this!] +options MFS #Memory Filesystem options MSDOSFS #MSDOS Filesystem -options "CD9660" #ISO 9660 Filesystem -options "EXT2FS" -options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] +options CD9660 #ISO 9660 Filesystem +options EXT2FS +options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options INTRO_USERCONFIG #imply -c and parse info area #options DEVFS options PCI_QUIET options NO_SWAPPING -options NO_LKM - -config kernel root on fd0 controller isa0 controller pci0 -controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 +controller fdc0 at isa? port IO_FD1 irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 -options "CMD640" # work around CMD640 chip deficiency -controller wdc0 at isa? port "IO_WD1" bio irq 14 +controller wdc0 at isa? port IO_WD1 irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 -controller wdc1 at isa? port "IO_WD2" bio irq 15 +controller wdc1 at isa? port IO_WD2 irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 -options ATAPI #Enable ATAPI support for IDE bus -options ATAPI_STATIC #Don't do it as an LKM -device acd0 #IDE CD-ROM +device wcd0 #IDE CD-ROM -# syscons is the default console driver, resembling an SCO console +# atkbdc0 controlls both the keyboard and the PS/2 mouse +controller atkbdc0 at isa? port IO_KBD +device atkbd0 at atkbdc? irq 1 +device psm0 at atkbdc? irq 12 -controller atkbdc0 at isa? port IO_KBD tty -device atkbd0 at isa? tty irq 1 -device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts -device sc0 at isa? tty -device npx0 at isa? port IO_NPX irq 13 +# syscons is the default console driver, resembling an SCO console +device sc0 at isa? + +device npx0 at nexus? port IO_NPX irq 13 -device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 -device sio1 at isa? port "IO_COM2" tty irq 3 -device sio2 at isa? disable port "IO_COM3" tty irq 5 -device sio3 at isa? disable port "IO_COM4" tty irq 9 +device sio0 at isa? port IO_COM1 flags 0x10 irq 4 +device sio1 at isa? port IO_COM2 irq 3 +device sio2 at isa? disable port IO_COM3 irq 5 +device sio3 at isa? disable port IO_COM4 irq 9 +# +# The following Ethernet NICs are all PCI devices. +# +device de0 # DEC/Intel DC21x4x (``Tulip'') +#device de1 # DEC/Intel DC21x4x (``Tulip'') +device fxp0 # Intel EtherExpress PRO/100B (82557, 82558 + # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. -device de0 -#device de1 -device fxp0 - -device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 -device ep0 at isa? port 0x300 net irq 10 -device ie0 at isa? port 0x300 net irq 5 iomem 0xd0000 -device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 -device lnc0 at isa? port 0x300 net irq 10 + +device ed0 at isa? port 0x280 irq 5 iomem 0xd8000 +device ep0 at isa? port 0x300 irq 10 +device ie0 at isa? port 0x300 irq 5 iomem 0xd0000 +device le0 at isa? port 0x300 irq 5 iomem 0xd0000 +device lnc0 at isa? port 0x300 irq 10 pseudo-device loop pseudo-device ether diff --git a/release/picobsd/isp/conf/PICOBSD b/release/picobsd/isp/conf/PICOBSD index 36b13f9..f8e9568 100644 --- a/release/picobsd/isp/conf/PICOBSD +++ b/release/picobsd/isp/conf/PICOBSD @@ -1,26 +1,26 @@ # -# $Id: PICOBSD,v 1.9 1999/02/10 02:26:04 des Exp $ +# $Id: PICOBSD,v 1.8.2.2 1999/02/15 02:49:12 des Exp $ # -machine "i386" -cpu "I386_CPU" -cpu "I486_CPU" -cpu "I586_CPU" -cpu "I686_CPU" +machine i386 +cpu I386_CPU +cpu I486_CPU +cpu I586_CPU +cpu I686_CPU ident PICOBSD maxusers 20 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem -options FFS_ROOT +options FFS_ROOT #FFS usable as root device [keep this!] options NFS #Network Filesystem #options BOOTP -options MFS +options MFS #Memory Filesystem options MSDOSFS #MSDOS Filesystem -options "CD9660" #ISO 9660 Filesystem +options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem -options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] +options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options USERCONFIG #boot -c editor options INTRO_USERCONFIG #imply -c and parse info area options VISUAL_USERCONFIG #visual boot -c editor @@ -29,46 +29,42 @@ options IPFIREWALL_DEFAULT_TO_ACCEPT options IPDIVERT #options DEVFS options PCI_QUIET -options NO_LKM # Support for bridging and bandwidth limiting #options DUMMYNET #options BRIDGE -config kernel root on fd0a - controller isa0 controller pci0 -controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 +controller fdc0 at isa? port IO_FD1 irq 6 drq 2 disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 -options "CMD640" # work around CMD640 chip deficiency -controller wdc0 at isa? port "IO_WD1" bio irq 14 +controller wdc0 at isa? port IO_WD1 irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 -controller wdc1 at isa? port "IO_WD2" bio irq 15 +controller wdc1 at isa? port IO_WD2 irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 -options ATAPI #Enable ATAPI support for IDE bus -options ATAPI_STATIC #Don't do it as an LKM -device acd0 #IDE CD-ROM +device wcd0 #IDE CD-ROM -# syscons is the default console driver, resembling an SCO console +# atkbdc0 controlls both the keyboard and the PS/2 mouse +controller atkbdc0 at isa? port IO_KBD +device atkbd0 at atkbdc? irq 1 -controller atkbdc0 at isa? port IO_KBD tty -device atkbd0 at isa? tty irq 1 device vga0 at isa? port ? conflicts -device sc0 at isa? tty -device npx0 at isa? port IO_NPX irq 13 +# syscons is the default console driver, resembling an SCO console +device sc0 at isa? + +device npx0 at nexus? port IO_NPX irq 13 -device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 -device sio1 at isa? port "IO_COM2" tty irq 3 -device sio2 at isa? port "IO_COM3" tty irq 5 -device sio3 at isa? port "IO_COM4" tty irq 9 +device sio0 at isa? port IO_COM1 flags 0x10 irq 4 +device sio1 at isa? port IO_COM2 irq 3 +device sio2 at isa? port IO_COM3 irq 5 +device sio3 at isa? port IO_COM4 irq 9 # Support for multiport serial cards @@ -76,17 +72,17 @@ options COM_MULTIPORT # AST -device sio4 at isa? port 0x2a0 tty flags 0x701 -device sio5 at isa? port 0x2a8 tty flags 0x701 -device sio6 at isa? port 0x2b0 tty flags 0x701 -device sio7 at isa? port 0x2b8 tty flags 0x701 irq 12 +device sio4 at isa? port 0x2a0 flags 0x701 +device sio5 at isa? port 0x2a8 flags 0x701 +device sio6 at isa? port 0x2b0 flags 0x701 +device sio7 at isa? port 0x2b8 flags 0x701 irq 12 # Boca Board. You must configure the ports above with -c to change the flags. -device sio8 at isa? port 0x120 tty flags 0xb05 -device sio9 at isa? port 0x128 tty flags 0xb05 -device sio10 at isa? port 0x130 tty flags 0xb05 -device sio11 at isa? port 0x138 tty flags 0xb05 irq 12 +device sio8 at isa? port 0x120 flags 0xb05 +device sio9 at isa? port 0x128 flags 0xb05 +device sio10 at isa? port 0x130 flags 0xb05 +device sio11 at isa? port 0x138 flags 0xb05 irq 12 # Hayes ESP boards @@ -97,28 +93,36 @@ options COM_ESP device rp0 device rp1 # The ISA versions -device rp0 at isa? port 0x100 tty -device rp1 at isa? port 0x180 tty +device rp0 at isa? port 0x100 +device rp1 at isa? port 0x180 # Cyclades Cyclom-Y serial driver -device cy0 at isa? tty irq 10 iomem 0xd4000 iosiz 0x2000 -device cy1 at isa? tty irq 11 iomem 0xd6000 iosiz 0x2000 +device cy0 at isa? irq 10 iomem 0xd4000 iosiz 0x2000 +device cy1 at isa? irq 11 iomem 0xd6000 iosiz 0x2000 -device lpt0 at isa? port? tty irq 7 +device ppc0 at isa? port? flags 0x40 irq 7 +controller ppbus0 +device lpt0 at ppbus? +device plip0 at ppbus? +device ppi0 at ppbus? + +# +# The following Ethernet NICs are all PCI devices. +# +device de0 # DEC/Intel DC21x4x (``Tulip'') +device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. -device de0 -device fxp0 - -device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 -device ed1 at isa? port 0x300 net irq 5 iomem 0xd0000 -device ep0 at isa? port 0x300 net irq 10 -device ep1 at isa? port 0x280 net irq 5 -device ie0 at isa? port 0x300 net irq 5 iomem 0xd0000 -device lnc0 at isa? port 0x300 net irq 10 drq 0 + +device ed0 at isa? port 0x280 irq 5 iomem 0xd8000 +device ed1 at isa? port 0x300 irq 5 iomem 0xd0000 +device ep0 at isa? port 0x300 irq 10 +device ep1 at isa? port 0x280 irq 5 +device ie0 at isa? port 0x300 irq 5 iomem 0xd0000 +device lnc0 at isa? port 0x300 irq 10 drq 0 pseudo-device loop pseudo-device ether diff --git a/release/picobsd/net/conf/PICOBSD b/release/picobsd/net/conf/PICOBSD index 8c56b28..47b250c 100644 --- a/release/picobsd/net/conf/PICOBSD +++ b/release/picobsd/net/conf/PICOBSD @@ -1,24 +1,24 @@ # -# $Id: PICOBSD,v 1.9 1999/02/10 02:26:04 des Exp $ +# $Id: PICOBSD,v 1.8.2.2 1999/02/15 02:49:24 des Exp $ # -machine "i386" -cpu "I386_CPU" -cpu "I486_CPU" -cpu "I586_CPU" -cpu "I686_CPU" +machine i386 +cpu I386_CPU +cpu I486_CPU +cpu I586_CPU +cpu I686_CPU ident PICOBSD maxusers 10 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem -options FFS_ROOT +options FFS_ROOT #FFS usable as root device [keep this!] options NFS #Network Filesystem -options MFS +options MFS #Memory Filesystem options MSDOSFS #MSDOS Filesystem -options "CD9660" #ISO 9660 Filesystem -options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] +options CD9660 #ISO 9660 Filesystem +options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options USERCONFIG #boot -c editor options INTRO_USERCONFIG #imply -c and parse info area options VISUAL_USERCONFIG #visual boot -c editor @@ -26,63 +26,67 @@ options IPFIREWALL options IPFIREWALL_DEFAULT_TO_ACCEPT options IPDIVERT options PCI_QUIET -options NO_LKM #options DEVFS # Support for bridging and bandwidth limiting #options DUMMYNET #options BRIDGE -config kernel root on fd0a - controller isa0 controller pci0 -controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 +controller fdc0 at isa? port IO_FD1 irq 6 drq 2 disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 -options "CMD640" # work around CMD640 chip deficiency -controller wdc0 at isa? port "IO_WD1" bio irq 14 +controller wdc0 at isa? port IO_WD1 irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 -controller wdc1 at isa? port "IO_WD2" bio irq 15 +controller wdc1 at isa? port IO_WD2 irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 -options ATAPI #Enable ATAPI support for IDE bus -options ATAPI_STATIC #Don't do it as an LKM -device acd0 #IDE CD-ROM +device wcd0 #IDE CD-ROM -# syscons is the default console driver, resembling an SCO console +# atkbdc0 controlls both the keyboard and the PS/2 mouse +controller atkbdc0 at isa? port IO_KBD +device atkbd0 at atkbdc? irq 1 -controller atkbdc0 at isa? port IO_KBD tty -device atkbd0 at isa? tty irq 1 device vga0 at isa? port ? conflicts -device sc0 at isa? tty -device npx0 at isa? port IO_NPX irq 13 +# syscons is the default console driver, resembling an SCO console +device sc0 at isa? + +device npx0 at nexus? port IO_NPX irq 13 -device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 -device sio1 at isa? port "IO_COM2" tty irq 3 -device sio2 at isa? disable port "IO_COM3" tty irq 5 -device sio3 at isa? disable port "IO_COM4" tty irq 9 +device sio0 at isa? port IO_COM1 flags 0x10 irq 4 +device sio1 at isa? port IO_COM2 irq 3 +device sio2 at isa? disable port IO_COM3 irq 5 +device sio3 at isa? disable port IO_COM4 irq 9 -device lpt0 at isa? port? tty irq 7 +device ppc0 at isa? port? flags 0x40 irq 7 +controller ppbus0 +device lpt0 at ppbus? +device plip0 at ppbus? +device ppi0 at ppbus? + +# +# The following Ethernet NICs are all PCI devices. +# +device de0 # DEC/Intel DC21x4x (``Tulip'') +device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. -device de0 -device fxp0 - -device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 -device ed1 at isa? port 0x300 net irq 10 iomem 0xd0000 -device ep0 at isa? port 0x300 net irq 10 -device ep1 at isa? port 0x280 net irq 5 -device ie0 at isa? port 0x300 net irq 5 iomem 0xd0000 -device ie1 at isa? port 0x360 net irq 7 iomem 0xd0000 + +device ed0 at isa? port 0x280 irq 5 iomem 0xd8000 +device ed1 at isa? port 0x300 irq 10 iomem 0xd0000 +device ep0 at isa? port 0x300 irq 10 +device ep1 at isa? port 0x280 irq 5 +device ie0 at isa? port 0x300 irq 5 iomem 0xd0000 +device ie1 at isa? port 0x360 irq 7 iomem 0xd0000 pseudo-device loop pseudo-device ether diff --git a/release/picobsd/router/conf/PICOBSD b/release/picobsd/router/conf/PICOBSD index f900120..ead218c 100644 --- a/release/picobsd/router/conf/PICOBSD +++ b/release/picobsd/router/conf/PICOBSD @@ -1,25 +1,25 @@ # -# $Id: PICOBSD,v 1.12 1999/02/10 02:26:04 des Exp $ +# $Id: PICOBSD,v 1.11.2.2 1999/02/15 02:49:31 des Exp $ # -machine "i386" -cpu "I386_CPU" -cpu "I486_CPU" -cpu "I586_CPU" -cpu "I686_CPU" +machine i386 +cpu I386_CPU +cpu I486_CPU +cpu I586_CPU +cpu I686_CPU ident PICOBSD maxusers 10 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem -options FFS_ROOT +options FFS_ROOT #FFS usable as root device [keep this!] #options NFS #Network Filesystem -options MFS +options MFS #Memory Filesystem #options MSDOSFS #MSDOS Filesystem -#options "CD9660" #ISO 9660 Filesystem +#options CD9660 #ISO 9660 Filesystem #options PROCFS #Process filesystem -options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] +options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options USERCONFIG #boot -c editor #options USERCONFIG_BOOT #imply -c and parse info area #options VISUAL_USERCONFIG #visual boot -c editor @@ -28,63 +28,67 @@ options IPFIREWALL_DEFAULT_TO_ACCEPT options IPDIVERT options PCI_QUIET #options DEVFS -options NO_LKM options NO_SWAPPING # Support for bridging and bandwidth limiting #options DUMMYNET #options BRIDGE -config kernel root on fd0a - controller isa0 controller pci0 -controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 +controller fdc0 at isa? port IO_FD1 irq 6 drq 2 disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 -#options "CMD640" # work around CMD640 chip deficiency -#controller wdc0 at isa? port "IO_WD1" bio irq 14 +#controller wdc0 at isa? port IO_WD1 irq 14 #disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 -#controller wdc1 at isa? port "IO_WD2" bio irq 15 +#controller wdc1 at isa? port IO_WD2 irq 15 #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 -#options ATAPI #Enable ATAPI support for IDE bus -#options ATAPI_STATIC #Don't do it as an LKM -#device acd0 #IDE CD-ROM +#device wcd0 #IDE CD-ROM -# syscons is the default console driver, resembling an SCO console +# atkbdc0 controlls both the keyboard and the PS/2 mouse +controller atkbdc0 at isa? port IO_KBD +device atkbd0 at atkbdc? irq 1 -controller atkbdc0 at isa? port IO_KBD tty -device atkbd0 at isa? tty irq 1 device vga0 at isa? port ? conflicts -device sc0 at isa? tty -device npx0 at isa? port IO_NPX irq 13 +# syscons is the default console driver, resembling an SCO console +device sc0 at isa? + +device npx0 at nexus? port IO_NPX irq 13 -device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 -device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr -device sio2 at isa? disable port "IO_COM3" tty irq 5 -device sio3 at isa? disable port "IO_COM4" tty irq 9 +device sio0 at isa? port IO_COM1 flags 0x10 irq 4 +device sio1 at isa? port IO_COM2 irq 3 +device sio2 at isa? disable port IO_COM3 irq 5 +device sio3 at isa? disable port IO_COM4 irq 9 -#device lpt0 at isa? port? tty irq 7 +#device ppc0 at isa? port? flags 0x40 irq 7 +#controller ppbus0 +#device lpt0 at ppbus? +#device plip0 at ppbus? +#device ppi0 at ppbus? + +# +# The following Ethernet NICs are all PCI devices. +# +device de0 # DEC/Intel DC21x4x (``Tulip'') +device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. -device de0 -device fxp0 - -device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 -device ed1 at isa? port 0x300 net irq 10 iomem 0xd0000 -device ep0 at isa? port 0x300 net irq 10 -device ep1 at isa? port 0x280 net irq 5 -device ie0 at isa? port 0x300 net irq 5 iomem 0xd0000 -device ie1 at isa? port 0x360 net irq 7 iomem 0xd0000 + +device ed0 at isa? port 0x280 irq 5 iomem 0xd8000 +device ed1 at isa? port 0x300 irq 10 iomem 0xd0000 +device ep0 at isa? port 0x300 irq 10 +device ep1 at isa? port 0x280 irq 5 +device ie0 at isa? port 0x300 irq 5 iomem 0xd0000 +device ie1 at isa? port 0x360 irq 7 iomem 0xd0000 pseudo-device loop pseudo-device ether |