3 files changed, 47 insertions, 33 deletions
diff --git a/sbin/iscontrol/iscontrol.8 b/sbin/iscontrol/iscontrol.8
index f9a3dd1..4ae0d3f 100644
--- a/sbin/iscontrol/iscontrol.8
+++ b/sbin/iscontrol/iscontrol.8
@@ -45,14 +45,15 @@ use of the SCSI protocol over TCP/IP networks,
 the
 .Nm
 program is the userland side of an iSCSI session, see
-iscsi_initiator(4).
+.Xr iscsi_initiator 4 .
 It has 2 modes of operation, if -d (discovery session) is specified,
 it will print out the
 .Em target names
 returned by the target and exit.
-In the second mode, it will, after a succesful login/negotiation, run
+In the second mode, it will, after a successful login/negotiation, run
 in daemon mode, monitoring the connection, and will try to reconnect
-in case of a network/target failure. It will terminate/logout the session
+in case of a network/target failure.
+It will terminate/logout the session
 when a SIGHUP signal is received.
 The flags are as follows:
 .Bl -tag -width variable=value
@@ -65,17 +66,21 @@ and exit.
 .It Fl c Ar file
 a file containing configuration
 .Em key-options ,
-see iscsi.conf(5)
+see
+.Xr iscsi.conf 5
 .It Fl n Ar nickname
 if
 .Sy -c file
 is specified, then search for the block named
 .Em nickname
-in that file, see iscsi.conf(5)
+in that file, see
+.Xr iscsi.conf 5
 .It Fl t Ar target
 is the target's IP address or name
 .It Ar variable Ns = Ns Ar value
-see iscsi.conf(5) for the complete list of variables/options and their
+see
+.Xr iscsi.conf 5
+for the complete list of variables/options and their
 possible values.
 .El
 .Sh EXAMPLES
@@ -87,21 +92,23 @@ with the target and
 print to stdout the list of available targetnames/targetadresses.
 Note: this listing does not necessarily mean availability, since
 depending on the target configuration, a discovery session might
-not need login/access permition, but a 
+not need login/access permission, but a 
 .Em full session
 certainly does.
 .sp
 .Dl iscontrol -c /etc/iscsi.conf -n myiscsi
 .Pp
-will read options from file /etc/iscsi.conf, use the targetaddress
+will read options from
+.Pa /etc/iscsi.conf ,
+use the targetaddress
 found in the block nicknamed myiscsi, login and negotiate
 whatever options are specified, and start an iscsi-session.
 .Sh SEE ALSO
+.Xr da 4 ,
 .Xr iscsi_initiator 4 ,
+.Xr sa 4 ,
 .Xr iscsi.conf 5 ,
-.Xr camcontrol 8 ,
-.Xr da 4 ,
-.Xr sa 4
+.Xr camcontrol 8
 .Sh STANDARDS
 RFC 3720
 .\"Sh HISTORY
@@ -110,7 +117,7 @@ RFC 3720
 should probably load the iscsi_initiator module if needed.
 .br
 Not all functions/specifications have been implemented yet, noticeably
-missing are the Task Management Funtions.
+missing are the Task Management Functions.
 The error recovery, though not
 .Em fully compliant
 does a brave effort to recover from network disconnects.
diff --git a/sbin/iscontrol/iscsi.conf.5 b/sbin/iscontrol/iscsi.conf.5
index a8d558a..3388746 100644
--- a/sbin/iscontrol/iscsi.conf.5
+++ b/sbin/iscontrol/iscsi.conf.5
@@ -35,7 +35,8 @@ The file
 .Nm ,
 is read by the
 .Xr iscontrol 8
-program, it contains declarations and parameter/key-options.
+program.
+It contains declarations and parameter/key-options.
 The syntax is very simple,
 .D1 Li variable = value;
 and they can be grouped via a 
@@ -55,13 +56,16 @@ The following are specified in the iSCSI RFC 3720,
 for a full description see sections 11/12 of the RFC.
 .Bl -tag -width MaxConnections
 .It Cm AuthMethod
-current only supported authentication method is CHAP, with
-digest either MD5 or SHA. Default is none.
+currently only supported authentication method is CHAP, with
+digest either MD5 or SHA.
+Default is none.
 .It Cm HeaderDigest
 a 
 .Em digest
 is calculated on the header of all iSCSI PDUs, and
-checked. Only CRC32C is implemented. Default is none.
+checked.
+Only CRC32C is implemented.
+Default is none.
 .It Cm DataDigest
 same as for HeaderDigest, but on the data part of the iSCSI PDU.
 .It Cm MaxConnections
@@ -118,7 +122,7 @@ option.
 .It Cm ErrorRecoveryLevel
 Only level 0 is supported.
 .It Cm SessionType
-either Discovery  or Normal, default is Normal, see the
+either Discovery or Normal, default is Normal, see the
 .Fl d
 flag of
 .Cm iscontrol .
@@ -128,7 +132,7 @@ The following are not specified in the
 .Sy RFC 3720
 .Bl -tag -width sockbufsize
 .It Cm port
-The iscsi port used by the iscsi protocol, defaults to 3260.
+The iSCSI port used by the iSCSI protocol, defaults to 3260.
 .It Cm tags
 Sets the
 .Em tag opening
@@ -137,23 +141,25 @@ to the value specified.
 overrides the compiled value of
 .Sy luns ,
 see 
-.Xr iscsi_initiator 4 . This value can only be reduced.
+.Xr iscsi_initiator 4 .
+This value can only be reduced.
 .It Cm sockbufsize
 sets the receiver and transmitter socket buffer size to
 .Em size,
-in kilobites. The default is 128.
+in kilobytes.
+The default is 128.
 .El
 .sp
 If
-.Em AutheMethod
+.Em AuthMethod
 is set to
 .Cm CHAP ,
 then the following must also be set:
 .Bl -tag -width chapSecret
 .It Cm chapSecret
 this
-.Em shared-secret.
-Can be either an ascci string (e.g. hello world), a hex string (e.g
+.Em shared-secret .
+Can be either an ASCII string (e.g. hello world), a hex string (e.g
 0xababcd0987654321...), or base64 string (eg 0b...)
 .It Cm chapIName
 the chap-name, defaults to
@@ -188,7 +194,7 @@ chaptest {
 }
 .Ed
 .Sh ERRORS
-The parsing is very primitive, so don't expect - at the moment - any
+The parsing is very primitive, so do not expect - at the moment - any
 error messages.
 .Sh SEE ALSO
 .Xr iscsi_initiator 4 ,
diff --git a/share/man/man4/iscsi_initiator.4 b/share/man/man4/iscsi_initiator.4
index 5f3bf16..1697b2f 100644
--- a/share/man/man4/iscsi_initiator.4
+++ b/share/man/man4/iscsi_initiator.4
@@ -47,11 +47,12 @@ iscsi_initiator_load="YES"
 .Sh DESCRIPTION
 The
 .Nm
-implements the kernel side of the Internet ISCSI (iSCSI) network
+implements the kernel side of the Internet SCSI (iSCSI) network
 protocol standard, the user land companion is
-.Xr iscontrol 8, and permits access to remote
+.Xr iscontrol 8 ,
+and permits access to remote
 .Em virtual
-SCSI devices via the
+SCSI devices via
 .Xr cam 4 .
 .Sh SYSCTL VARIABLES
 .Bl -tag -width ".Va net.iscsi.n.targeaddress"
@@ -83,21 +84,21 @@ see
 .El
 .Sh FILES
 The 
-.NM 
+.Nm
 driver creates the following:
 .Bl -tag -width ".Pa /dev/iscsi%dxx" -compact
+.Pp
 .It Pa /dev/iscsi
-used to creat new sessions.
+used to create new sessions.
 .It Pa /dev/iscsi%d
 for each new session.
 .El
-.\" .Sh ERRORS
 .Sh SEE ALSO
-.Xr iscontrol 8 ,
 .Xr cam 4 ,
-.Xr camcontrol 8
+.Xr camcontrol 8 ,
+.Xr iscontrol 8
 .Sh STANDARDS
-ISCSI RFC 3720
+iSCSI RFC 3720
 .\" .Sh HISTORY
 .\" .Sh AUTHORS
 .Sh BUGS