diff options
28 files changed, 199 insertions, 199 deletions
diff --git a/share/doc/FAQ/freebsd-faq.sgml b/share/doc/FAQ/freebsd-faq.sgml index 1308db1..96bcb3f 100644 --- a/share/doc/FAQ/freebsd-faq.sgml +++ b/share/doc/FAQ/freebsd-faq.sgml @@ -4,7 +4,7 @@ <title>Frequently Asked Questions for FreeBSD 2.X <author>The FreeBSD FAQ Team, <tt/FAQ@FreeBSD.ORG/ -<date> $Id: freebsd-faq.sgml,v 1.30 1996/01/27 15:57:07 roberto Exp $ +<date> $Id: freebsd-faq.sgml,v 1.31 1996/01/28 16:59:05 jfieber Exp $ <abstract> This is the FAQ for FreeBSD systems version 2.X All entries are assumed to be relevant to FreeBSD 2.0.5+, unless otherwise noted. @@ -161,7 +161,7 @@ Any entries with a <XXX> are under construction. domain. <tag/users-groups/ This is the mailing list for the coordinators from each of the local area Users Groups to - dicuss matters with each other and a designated individual + discuss matters with each other and a designated individual from the Core Team. This mail list should be limited to meeting synopsis and coordination of projects that span User Groups @@ -184,7 +184,7 @@ Any entries with a <XXX> are under construction. To unsubscribe, it is as easy. Just remember to send your request to <url url="mailto:Majordomo@FreeBSD.ORG" name="The mail administrator"> - <bf/not/ to the list itself. The last thing the subscribred + <bf/not/ to the list itself. The last thing the subscribed users want to see is administrative requests... <sect1> @@ -320,7 +320,7 @@ Any entries with a <XXX> are under construction. strings attached, though at least on the side of enforced access rather than the usual opposite. Due to the additional complexities that can evolve in the commercial use of GPL software, - we do, however, endevor to replace such software with submissions + we do, however, endeavor to replace such software with submissions under the more relaxed BSD copyright whenever possible. <sect> @@ -373,7 +373,7 @@ Any entries with a <XXX> are under construction. with the ``upgrade'' option of the 2.1.0 installation program. After the installation, if you build a custom kernel, it will run - in 4 MB. Someone has even succeded in booting with 2 MB (the + in 4 MB. Someone has even succeeded in booting with 2 MB (the system was almost unusable though :-)) <sect1> @@ -803,7 +803,7 @@ sea32550N|Seagate 32550N:\ <itemize> <item>AST/4 in shared IRQ mode, <item>ARNET 8 port in shared IRQ mode, - <item>BOCA 4/8/16 port cards inshared IRQ mode, + <item>BOCA 4/8/16 port cards in shared IRQ mode, <item>Cyclades 8/16 port <Alpha>, <item>Cronyx/Sigfgma multiport sync/async, <item>RISCom/8 multiport card, @@ -813,7 +813,7 @@ sea32550N|Seagate 32550N:\ Some unnamed clone cards have also been known to work, especially those that claim to be AST compatible. - A Dibiboard driver is currently in alpha stage. If you want to + A Digiboard driver is currently in alpha stage. If you want to test it, take the file in <url url="ftp://freefall.FreeBSD.ORG/pub/incoming" name="the incoming directory"> @@ -940,13 +940,13 @@ options PSM_NO_RESET #don't reset mouse hardware (some laptops) Fujitsu MB86960A/MB86965A Ethernet cards </descrip> - <bf/NOTE/ PCMCIA ethernet cards from IBM and National + <bf/NOTE/ PCMCIA Ethernet cards from IBM and National Semiconductor. <bf/NOTE/ Drivers marked with (*) are known to have problems. <bf/NOTE/ We also support TCP/IP over parallel lines. At this point - we are incompatiable with other versions, but we hope to correct + we are incompatible with other versions, but we hope to correct this in the near future. <sect1> @@ -972,7 +972,7 @@ options PSM_NO_RESET #don't reset mouse hardware (some laptops) <descrip> <tag><tt/b004.c/</tag> - Driver for B004 compatiable Transputer boards <newline> + Driver for B004 compatible Transputer boards <newline> <tag>``ctx'' driver</tag> Driver for CORTEX-I Frame grabber <newline> <tag>``gp'' driver</tag> @@ -1073,7 +1073,7 @@ options PSM_NO_RESET #don't reset mouse hardware (some laptops) <heading>Are there any Database systems for FreeBSD?</heading> <p> Yes! Conetic Software Systems has ported their C/base and C/books - datebase systems to FreeBSD 2.0.5 and higher. + database systems to FreeBSD 2.0.5 and higher. <descrip> <tag/For more information/ @@ -1149,7 +1149,7 @@ options PSM_NO_RESET #don't reset mouse hardware (some laptops) Yes. We support the concept of a ``package'', which is essentially a gzipped binary distribution with a little extra intelligence embedded in it for doing any custom installation - work required. Packages can also be installed or deinstalled + work required. Packages can also be installed or uninstalled again easily without having to know the gory details. CDROM people will have a <tt>packages/</tt> directory on their CD, others can get the currently available packages from: @@ -1393,7 +1393,7 @@ crw-rw-rw- 1 root wheel 41, 1 Oct 15 22:14 spx <p> Read this: <url url="http://www.freebsd.org/How/handbook/current.html" - name="Handook's section of FreeBSD-CURRENT"> + name="Handbook's section of FreeBSD-CURRENT"> it will tell you all you need to know. <sect1> @@ -1404,13 +1404,13 @@ crw-rw-rw- 1 root wheel 41, 1 Oct 15 22:14 spx for keeping their development trees in sync. We use it to keep remote sites in sync with our central development sources. - Unless you have direct internet connectivity, and don't care too + Unless you have direct Internet connectivity, and don't care too much about the cost/duration of the sessions, you shouldn't use sup. For those ``low/expensive-bandwidth'' applications, we have developed <tt/CTM/, see the section <ref id="ctm" name="on CTM"> for more about that. - To use it, you need to have direct internet connectivity (not + To use it, you need to have direct Internet connectivity (not just mail or news). First, pick up the <tt/sup.tgz/ package from: @@ -1433,7 +1433,7 @@ crw-rw-rw- 1 root wheel 41, 1 Oct 15 22:14 spx which are a set of supfiles for supping from <tt/FreeBSD.ORG/. <sect1> - <heading>Has anyone done any temperature testing while running FreeBSD? I know linux runs cooler than dos, but have never seen a mention of FreeBSD. It seems to run really hot</heading> + <heading>Has anyone done any temperature testing while running FreeBSD? I know Linux runs cooler than dos, but have never seen a mention of FreeBSD. It seems to run really hot</heading> <p> No, but we have done numerous taste tests on blindfolded volunteers who have also had 250 micrograms of LSD-25 @@ -1448,7 +1448,7 @@ crw-rw-rw- 1 root wheel 41, 1 Oct 15 22:14 spx funny old business we're in! Seriously, Linux use the ``<tt/HALT/'' instruction when the - system is idle thus lowering its energy comsumption and therefore + system is idle thus lowering its energy consumption and therefore the heat it generates. <sect1> @@ -1523,7 +1523,7 @@ crw-rw-rw- 1 root wheel 41, 1 Oct 15 22:14 spx <p> Newer BSD based systems have a ``<tt/-b/'' option to split that - allows them to split files on arbitary byte bondaries. + allows them to split files on arbitrary byte boundaries. Here is an example from <tt>/usr/src/Makefile</tt>. @@ -1542,10 +1542,10 @@ crw-rw-rw- 1 root wheel 41, 1 Oct 15 22:14 spx <sect1> <heading>I've got this neato kernel extension I just know everyone will will want. How do I get it included into the distribution?</heading> <p> - Please take a look at the FAQ for submiting code to FreeBSD at: + Please take a look at the FAQ for submitting code to FreeBSD at: <url url="http://www.FreeBSD.ORG/How/handbook/submitters.html" - name="Handbbook's section on how to submit code">. + name="Handbook's section on how to submit code">. And thanks for the thought. @@ -1620,11 +1620,11 @@ crw-rw-rw- 1 root wheel 41, 1 Oct 15 22:14 spx helpful in configuring the new one. <sect1> - <heading>I don't understand, I have removed <tt/npx0/ from my kernel configuration file as I don't have a mathematic coprocessor but it keeps bombing saying that <tt/_hw_float/ is missing.</heading> + <heading>I don't understand, I have removed <tt/npx0/ from my kernel configuration file as I don't have a mathematic co-processor but it keeps bombing saying that <tt/_hw_float/ is missing.</heading> <p> The <tt/npx0/ is <bf/MANDATORY/. Even if you don't have a - mathematic coprocessor, you <bf/must/ include the <tt/npx0/ + mathematic co-processor, you <bf/must/ include the <tt/npx0/ device. <sect1> @@ -1675,7 +1675,7 @@ disk fd1 at fdc0 drive 1 write to through a special program to manage it called ``<tt/ft/'' - see the man page on <tt/ft/ for further details. Versions previous to <tt/-current/ also had some trouble dealing - wiht bad tape media; if you have trouble where <tt/ft/ seems to + with bad tape media; if you have trouble where <tt/ft/ seems to go back and forth over the same spot, try grabbing the latest version of <tt/ft/ from <tt>/usr/src/sbin/ft</tt> in <tt/-current/ and try that. @@ -1725,7 +1725,7 @@ disk fd1 at fdc0 drive 1 <p> The panic indicates that the system ran out of virtual memory for network buffers (specifically, mbuf clusters). You can increase - the amount of VM avaliable for mbuf clusters by adding: + the amount of VM available for mbuf clusters by adding: <code> options "NMBCLUSTERS=<n>" @@ -1786,7 +1786,7 @@ disk fd1 at fdc0 drive 1 put additional services like <tt/INN/ or a <tt/http/ server. The <tt>/etc/rc.serial</tt> is for serial port initialization - (e.g. locking the port characterictics, and so on.). + (e.g. locking the port characteristics, and so on.). The <tt>/etc/rc.i386</tt> is for Intel-specifics setting like the iBCS2 emulation. @@ -2010,7 +2010,7 @@ disk fd1 at fdc0 drive 1 <p> Some versions of the Linux NFS code only accept mount requests - from a priviledged port; try + from a privileged port; try <verb> mount -o -P linuxbox:/blah /mnt </verb> @@ -2019,14 +2019,14 @@ disk fd1 at fdc0 drive 1 <p> Sun workstations running SunOS 4.X only accept mount requests - from a priviledged port; try + from a privileged port; try <verb> mount -o -P sunbox:/blah /mnt </verb> - <sect1><heading>I'm having problems with my NeXTStep machines and other FreeBSD ones accross PPP</heading> + <sect1><heading>I'm having problems with my NeXTStep machines and other FreeBSD ones across PPP</heading> <p> - Try disabling the TCP extentions in <tt>/etc/sysconfig</tt> by + Try disabling the TCP extensions in <tt>/etc/sysconfig</tt> by changing the following variable to NO: <verb> tcp_extensions=NO @@ -2228,7 +2228,7 @@ Zynx ZX342 <heading>How can I enable dialup logins on my modem?</heading> <p> So you want to become an Internet service provider, eh? First, - you'll need one or more modems that can autoanswer. Your modem + you'll need one or more modems that can auto-answer. Your modem will need to assert carrier-detect when it detects a carrier and not assert it all the time. It will need to hang up the phone and reset itself when the data terminal ready (<tt/DTR/) line diff --git a/share/doc/handbook/authors.sgml b/share/doc/handbook/authors.sgml index 26f5dc5..ad5dce1 100644 --- a/share/doc/handbook/authors.sgml +++ b/share/doc/handbook/authors.sgml @@ -1,8 +1,8 @@ -<!-- $Id: authors.sgml,v 1.14 1996/01/03 12:59:37 gclarkii Exp $ --> +<!-- $Id: authors.sgml,v 1.15 1996/01/20 16:19:17 jfieber Exp $ --> <!-- The FreeBSD Documentation Project --> <!-- -Names and email address of contributing authors and CVS commiters. Use these +Names and email address of contributing authors and CVS committers. Use these entities when referencing people. Please not the use of single and double quotes. --> diff --git a/share/doc/handbook/booting.sgml b/share/doc/handbook/booting.sgml index 475fac0..9c36d59 100644 --- a/share/doc/handbook/booting.sgml +++ b/share/doc/handbook/booting.sgml @@ -3,7 +3,7 @@ This conversion has been made by Ollivier Robert. - $Id: booting.sgml,v 1.7 1995/10/07 04:31:15 jfieber Exp $ + $Id: booting.sgml,v 1.8 1995/10/22 00:41:56 jfieber Exp $ <!DOCTYPE linuxdoc PUBLIC "-//FreeBSD//DTD linuxdoc//EN"> @@ -52,7 +52,7 @@ Dosboot was written by DI. Christian Gusenbauer, and is unfortunately at this time one of the few pieces of code that isn't compilable under FreeBSD itself because it is written for - MicroSoft compilers. + Microsoft compilers. Dosboot will boot the kernel from a MS-DOS file or from a FreeBSD filesystem partition on the disk. It attempts to negotiate with @@ -62,7 +62,7 @@ <tag>Netboot</tag> - Netboot will try to find a supported ethernet card, and use + Netboot will try to find a supported Ethernet card, and use BOOTP, TFTP and NFS to find a kernel file to boot. </descrip> @@ -73,13 +73,13 @@ will initialize itself, trying to determine what hardware is present and so on, and then it needs to find a root filesystem. - Presently we support the following types of rootfilesystems: + Presently we support the following types of root filesystems: <descrip> <tag>UFS</tag> This is the most normal type of root filesystem. It can reside on - a floppy or on harddisk. + a floppy or on hard disk. <tag>MSDOS</tag> @@ -108,7 +108,7 @@ <p> To get the user-land going, when the kernel has finished initialization, it will create a process with ``<tt/pid == 1/'' and execute - a program on the rootfilesystem, this program is normally + a program on the root filesystem, this program is normally ``<tt>/sbin/init</tt>''. You can substitute any program for /sbin/init, as long as you keep @@ -152,7 +152,7 @@ <tag/C -- Start an X-server/ - Now you have an Xterminal, which is better than that dingy + Now you have an X-terminal, which is better than that dingy X-under-windows-so-slow-you-can-see-what-it-does thing that your boss insist is better than forking our money on HW. diff --git a/share/doc/handbook/contrib.sgml b/share/doc/handbook/contrib.sgml index e5ef0f8..a0c8f8d 100644 --- a/share/doc/handbook/contrib.sgml +++ b/share/doc/handbook/contrib.sgml @@ -1,4 +1,4 @@ -<!-- $Id: contrib.sgml,v 1.45 1996/01/15 23:57:59 asami Exp $ --> +<!-- $Id: contrib.sgml,v 1.46 1996/01/25 05:35:31 asami Exp $ --> <!-- The FreeBSD Documentation Project --> <chapt><heading>FreeBSD contributor list<label id="contrib"></heading> @@ -8,7 +8,7 @@ <p>This software was originally derived from William F. Jolitz's 386BSD release 0.1, though almost none of the original 386BSD specific code remains. This software has - been essentially reimplemented from the 4.4 BSD Lite + been essentially re-implemented from the 4.4 BSD Lite release provided by the Computer Science Research Group (CSRG) at the University of California, Berkeley and associated academic contributors. @@ -31,7 +31,7 @@ their support. TRW Financial Systems, Inc. provided 130 PCs, three 68 GB - fileservers, twelve ethernets, two routers and an ATM + fileservers, twelve Ethernets, two routers and an ATM switch for debugging the diskless code. They also keep a couple of FreeBSD hackers alive and busy. Thanks! @@ -70,7 +70,7 @@ <sect><heading>The FreeBSD Developers</heading> - <p>These are the people who have commit privs and do the work on + <p>These are the people who have commit privileges and do the work on FreeBSD source tree. All core team members are also developers. <itemize> diff --git a/share/doc/handbook/ctm.sgml b/share/doc/handbook/ctm.sgml index 0a036b3..41ce604 100644 --- a/share/doc/handbook/ctm.sgml +++ b/share/doc/handbook/ctm.sgml @@ -1,9 +1,9 @@ <!-- # This is the sgml version of the ctm.FAQ file. # -# Converted by Ollivier RObert <roberto@FreeBSD.ORG> +# Converted by Ollivier Robert <roberto@FreeBSD.ORG> # -# $Id: ctm.sgml,v 1.4 1995/08/29 01:42:33 jfieber Exp $ +# $Id: ctm.sgml,v 1.5 1995/10/16 09:11:22 jkh Exp $ # # ---------------------------------------------------------------------------- # "THE BEER-WARE LICENSE" (Revision 42): @@ -97,7 +97,7 @@ Megabytes of <tt/gzip/'ed data is common for a base delta. If you do have the 2.0-RELEASE <tt/srcdist/, you can instead - retreive the <tt/src-cur.0372R20.gz/ file, it's only 4Mb and it + retrieve the <tt/src-cur.0372R20.gz/ file, it's only 4Mb and it will take you to current from the 2.0-RELEASE sources. Once you've picked a base delta to start from, you will also need @@ -110,7 +110,7 @@ ctm -v -v /where/you/store/your/deltas/src-cur.* </verb> <tt/CTM/ understands deltas which have been put through <tt/gzip/, - so you don't need to gunzip them first, this saves diskspace. + so you don't need to gunzip them first, this saves disk space. Unless it feels very secure about the entire process, <tt/CTM/ will not touch your tree. To verify a delta you can also use the @@ -125,7 +125,7 @@ interface'' portions, as I have realized that I can't make up my mind on what options should do what, how and when... - That's really all there is to it. Everytime you get a new delta, + That's really all there is to it. Every time you get a new delta, just run it through <tt/CTM/ to keep your sources up to date. Don't remove the deltas if they are hard to download again. You @@ -176,7 +176,7 @@ but interest has not been all that high yet. Tell me if you want an email list for that too and we'll consider setting it up. - If you have commit priviledges or are similary authorized by the + If you have commit privileges or are similarly authorized by the FreeBSD core team, you can also get access to the CVS repository tree by the same means. Contact &a.phk; for details. diff --git a/share/doc/handbook/current.sgml b/share/doc/handbook/current.sgml index c440009..54a3fd8 100644 --- a/share/doc/handbook/current.sgml +++ b/share/doc/handbook/current.sgml @@ -1,4 +1,4 @@ -<!-- $Id: current.sgml,v 1.6 1995/10/16 09:01:52 jkh Exp $ --> +<!-- $Id: current.sgml,v 1.7 1995/12/11 15:09:10 jkh Exp $ --> <!-- The FreeBSD Documentation Project --> @@ -10,7 +10,7 @@ THE FREEBSD CURRENT POLICY -Last updated: $Date: 1995/10/16 09:01:52 $ +Last updated: $Date: 1995/12/11 15:09:10 $ This document attempts to explain the rationale behind FreeBSD-current, what you should expect should you decide to run it, @@ -25,7 +25,7 @@ snapshot of the working sources for FreeBSD. These include work in progress, experimental changes and transitional mechanisms that may or may not be present in the next official release of the software. While many of us compile almost daily from FreeBSD-current sources, -there are periods of time when the sources are literally uncompilable. +there are periods of time when the sources are literally un-compilable. These problems are generally resolved as expeditiously as possible, but whether or not FreeBSD-current sources bring disaster or greatly desired functionality can literally be a matter of which part of any diff --git a/share/doc/handbook/dialup.sgml b/share/doc/handbook/dialup.sgml index ddd6269..8d1812a 100644 --- a/share/doc/handbook/dialup.sgml +++ b/share/doc/handbook/dialup.sgml @@ -1,6 +1,6 @@ <!-- This is an SGML document in the linuxdoc DTD of the Tutorial for Configuring a FreeBSD for Dialup Services by Guy Helmer. - $Id: dialup.sgml,v 1.3 1995/08/29 01:42:35 jfieber Exp $ + $Id: dialup.sgml,v 1.4 1995/12/04 17:58:37 jfieber Exp $ <!DOCTYPE linuxdoc PUBLIC "-//Linux//DTD linuxdoc//EN"> @@ -290,7 +290,7 @@ version 1.1.5 and higher, there are also initialization devices (<tt>/dev/ttyld?</tt> and <tt>/dev/cual0?</tt>). The initialization devices are used to initialize communications port parameters each time a port is opened, such as <tt>crtscts</tt> for modems which use -<tt>CTS/RTS</tt> signalling for flow control. The locking devices are +<tt>CTS/RTS</tt> signaling for flow control. The locking devices are used to lock flags on ports to prevent users or programs changing certain parameters; see the manual pages <tt/termios(4)/, <tt/sio(4)/, and <tt/stty(1)/ for information on the terminal settings, locking @@ -440,7 +440,7 @@ parity; otherwise, the default is 7 bits, even parity. The example above starts the communications rate at 19.2 Kbps (for a V.32bis connection), then cycles through 9600 bps (for V.32), 2400 -bps, 1200 bps, 300 bps, and back to 19.2 Kbps. Communcations rate +bps, 1200 bps, 300 bps, and back to 19.2 Kbps. Communications rate cycling is implemented with the <tt/nx=/ (<bf/next table/) capability. Each of the lines uses a <tt/tc=/ (<bf/table continuation/) entry to pick up the rest of the ``standard'' settings for a particular data @@ -519,7 +519,7 @@ kill -1 1 to send the signal. If this is your first time setting up the system, though, you may want to wait until your modem(s) are properly -configured and connected before signalling <tt/init/. +configured and connected before signaling <tt/init/. <sect3><heading>Locked-Speed Config</heading> <p> @@ -774,7 +774,7 @@ If you still can't get a <tt/login:/ prompt, check <item> The initial capability name specified in <tt>/etc/ttys</tt> for the line matches a name of a capability in <tt>/etc/gettytab</tt> -<item> Each <tt/nx=/ entry matches another <tt/gettytab/ capabilty +<item> Each <tt/nx=/ entry matches another <tt/gettytab/ capability name <item> Each <tt/tc=/ entry matches another <tt/gettytab/ capability @@ -795,7 +795,7 @@ url="mailto:questions@freebsd.org" name="questions@FreeBSD.ORG"></tt> describing your modem and your problem, and the good folks on the list will try to help. -<sect1><heading>Acknowledgements</heading> +<sect1><heading>Acknowledgments</heading> <p> Thanks to these people for comments and advice: diff --git a/share/doc/handbook/diskless.sgml b/share/doc/handbook/diskless.sgml index 27f5912..f26eedd 100644 --- a/share/doc/handbook/diskless.sgml +++ b/share/doc/handbook/diskless.sgml @@ -1,4 +1,4 @@ -<!-- $Id: diskless.sgml,v 1.1.1.1 1995/04/28 16:19:59 jfieber Exp $ --> +<!-- $Id: diskless.sgml,v 1.2 1995/06/30 17:37:35 jfieber Exp $ --> <!-- The FreeBSD Documentation Project --> <sect><heading>Diskless operation<label id="diskless"></heading> @@ -28,7 +28,7 @@ <itemize> <item>HP9000/8xx running HP-UX 9.04 or later (pre 9.04 doesn't work)</item> - <item>Sun/Solaries 2.3. (you may need to get + <item>Sun/Solaris 2.3. (you may need to get bootp)</item> </itemize> @@ -61,8 +61,8 @@ server <X.X.X.X> - print/set bootp/tftp server address netmask <X.X.X.X> - print/set netmask hostname <name> - print/set hostname kernel <name> - print/set kernel name -rootfs <ip:/fs> - print/set rootfilesystem -swapfs <ip:/fs> - print/set swapfilesystem +rootfs <ip:/fs> - print/set root filesystem +swapfs <ip:/fs> - print/set swap filesystem swapsize <size> - set diskless swapsize in Kbytes diskboot - boot from disk autoboot - continue boot process diff --git a/share/doc/handbook/dma.sgml b/share/doc/handbook/dma.sgml index 1ae7566..249217e 100644 --- a/share/doc/handbook/dma.sgml +++ b/share/doc/handbook/dma.sgml @@ -1,4 +1,4 @@ -<!-- $Id: dma.sgml,v 1.1.2.2 1995/11/01 16:40:14 jfieber Exp $ --> +<!-- $Id: dma.sgml,v 1.2 1995/11/20 01:10:12 jfieber Exp $ --> <!-- The FreeBSD Documentation Project --> <!-- @@ -386,7 +386,7 @@ un-masked. That DMA channel is now considered to be ``armed'', and will respond when DRQ is asserted. - Refer to a hardware databook for precise programming + Refer to a hardware data book for precise programming details for the 8237. You will also need to refer to the I/O port map for the PC system. This map describes where the DMA and Page Register ports are located. A complete diff --git a/share/doc/handbook/eresources.sgml b/share/doc/handbook/eresources.sgml index d26bf3f..59fd6eb 100644 --- a/share/doc/handbook/eresources.sgml +++ b/share/doc/handbook/eresources.sgml @@ -1,4 +1,4 @@ -<!-- $Id: eresources.sgml,v 1.17 1995/12/11 15:09:12 jkh Exp $ --> +<!-- $Id: eresources.sgml,v 1.18 1996/01/16 14:53:09 jfieber Exp $ --> <!-- The FreeBSD Documentation Project --> <chapt> @@ -244,7 +244,7 @@ development for the future releases. <tag/FREEBSD-ISP/ <em>Issues for Internet Service Providers</em><newline> This mailing list is for discussing topics relevant to Internet -Serivce Providers (ISPs) using FreeBSD. +Service Providers (ISPs) using FreeBSD. <tag/FREEBSD-MULTIMEDIA/ <em>Multimedia discussions</em><newline> This is a forum about multimedia applications using FreeBSD. diff --git a/share/doc/handbook/esdi.sgml b/share/doc/handbook/esdi.sgml index cf0473e..0950003 100644 --- a/share/doc/handbook/esdi.sgml +++ b/share/doc/handbook/esdi.sgml @@ -1,4 +1,4 @@ -<!-- $Id: esdi.sgml,v 1.3 1995/11/25 20:00:45 jkh Exp $ --> +<!-- $Id: esdi.sgml,v 1.4 1995/12/04 17:58:38 jfieber Exp $ --> <!-- The FreeBSD Documentation Project --> <!-- @@ -12,7 +12,7 @@ This document describes the use of ESDI disks in combination with the FreeBSD operating system. Contrary to popular belief, this is possible and people are using ESDI based - systems succesfully! This document tries to explain you + systems successfully! This document tries to explain you how to do this. If you find something missing, plain wrong or have useful @@ -36,7 +36,7 @@ Secondly some higher level commands are added, making the ESDI interface somewhat 'smarter' to the operating system driver writers. It is by no means as smart as SCSI by the way. ESDI - is standardised by ANSI. + is standardized by ANSI. Capacities of the drives are boosted by putting more sectors on each track. Typical is 35 sectors per track, high capacity @@ -51,13 +51,13 @@ <sect3><heading>Physical connections</heading> <p> The ESDI interface uses two cables connected to each drive. - One cable is a 34 pin flatcable edge connector that carries + One cable is a 34 pin flat cable edge connector that carries the command and status signals from the controller to the - drive and viceversa. The command cable is daisy chained + drive and vice-versa. The command cable is daisy chained between all the drives. So, it forms a bus onto which all drives are connected. - The second cable is a a 20 pin flatcable edge connector that + The second cable is a a 20 pin flat cable edge connector that carries the data to and from the drive. This cable is radially connected, so each drive has it's own direct connection to the controller. @@ -89,7 +89,7 @@ is not used. So, one and <it>only</it> one drive, the one at - the fartest end of the command + the farthest end of the command cable has it's terminator installed/enabled. The controller automatically terminates the other end of the cable. Please note that this implies that the controller must be @@ -111,7 +111,7 @@ <sect3><heading>ESDI speed variants</heading> <p> - As briefly mentioned before, ESDI comes in two speed flavours. + As briefly mentioned before, ESDI comes in two speed flavors. The older drives and controllers use a 10 Mbits/second data transfer rate. Newer stuff uses 15 Mbits/second. @@ -132,7 +132,7 @@ In my case, the controller could not handle this number of sectors. It proved to work well except that it only used 35 sectors on each track. This meant losing a - lot of diskspace. + lot of disk space. Once again, check the documentation of your hardware for more info. Going out-of-spec like in the example might @@ -195,7 +195,7 @@ <p> Translations, although not exclusively a ESDI-only problem, might give you real trouble. - Translations come in multiple flavours. Most of them + Translations come in multiple flavors. Most of them have in common that they attempt to work around the limitations posed upon disk geometries by the original IBM PC/AT design (thanks IBM!). @@ -236,7 +236,7 @@ type (but there are probably more like this) offer the option to logically split a drive in multiple partitions as a BIOS option. I had select 1 drive == 1 partition because this - controller wrote this info onto the disk. On powerup it + controller wrote this info onto the disk. On power-up it read the info and presented itself to the system based on the info from the disk. @@ -248,7 +248,7 @@ (logically of course) of the bad one. In most cases the remapping is done by using N-1 sectors on - each track for actual datastorage, and sector N itself is + each track for actual data storage, and sector N itself is the spare sector. N is the total number of sectors physically available on the track. The idea behind this is that the operating system sees @@ -277,7 +277,7 @@ numbers to the end of the FreeBSD slice. When the disk is in operation, the disk accesses are checked - against the table read from the disk. Whenever a blocknumber + against the table read from the disk. Whenever a block number is requested that is in the bad144 list, a replacement block (also from the end of the FreeBSD slice) is used. In this way, the bad144 replacement scheme presents 'perfect' @@ -340,7 +340,7 @@ disk wd3 at wdc1 drive 1 <p> <sect3><heading>Adaptec 2320 controllers</heading> <p> - I succesfully installed FreeBSD onto a ESDI disk controlled by a + I successfully installed FreeBSD onto a ESDI disk controlled by a ACB-2320. No other operating system was present on the disk. To do so I low level formatted the disk using NEFMT.EXE @@ -351,7 +351,7 @@ disk wd3 at wdc1 drive 1 BIOS to allow the BIOS to boot it. Before using NEFMT.EXE I tried to format the disk using the - ACB-2320 BIOS builtin formatter. This proved to be a showstopper, + ACB-2320 BIOS builtin formatter. This proved to be a show stopper, because it didn't give me an option to disable spare sectoring. With spare sectoring enabled the FreeBSD installation process broke down on the bad144 run. @@ -372,7 +372,7 @@ disk wd3 at wdc1 drive 1 <sect3><heading>Western Digital WD1007 controllers</heading> <p> - I succesfully installed FreeBSD onto a ESDI disk controlled by a + I successfully installed FreeBSD onto a ESDI disk controlled by a WD1007 controller. To be precise, it was a WD1007-WA2. Other variations of the WD1007 do exist. diff --git a/share/doc/handbook/firewalls.sgml b/share/doc/handbook/firewalls.sgml index ee89043..4436edd 100644 --- a/share/doc/handbook/firewalls.sgml +++ b/share/doc/handbook/firewalls.sgml @@ -1,4 +1,4 @@ -<!-- $Id: firewalls.sgml,v 1.1 1995/10/14 21:49:45 jfieber Exp $ --> +<!-- $Id: firewalls.sgml,v 1.2 1995/11/01 00:42:17 gpalmer Exp $ --> <!-- The FreeBSD Documentation Project --> <sect><heading>Firewalls<label id="firewalls"></heading> @@ -9,7 +9,7 @@ Firewalls are an area of increasing interest for people who are connected to the Internet, and are even finding applications on private networks to provide enhanced security. This section will hopefully explain what firewalls are, how to use them, and how to use -the facilities provided in the FreeBSD kernel to impliment them. +the facilities provided in the FreeBSD kernel to implement them. <quote><bf>Note</bf>: People often think that having a firewall between your companies internal network and the ``Big Bad Internet'' will @@ -41,7 +41,7 @@ generally more secure than normal authentication mechanisms. <p>FreeBSD comes with a kernel packet filter (known as <tt>IPFW</tt>), which is what the rest of this section will concentrate on. Proxy servers can be built on FreeBSD from third party software, but there -is such a vareity of proxy servers available that it would be +is such a variety of proxy servers available that it would be impossible to cover them in this document. <sect2><heading>Packet filtering routers<label id="firewalls:packet_filters"></heading> @@ -234,12 +234,12 @@ For the accounting chain, valid <em>actions</em> are: <tag/single/Count packets matching the address specifier. <tag/bidirectional/Count packets matching the address specifier, and -also packets travelling in the opposite direction (i.e. those going +also packets traveling in the opposite direction (i.e. those going from ``destination'' to ``source''). </descrip> -<p>Each <em>action</em> will be recognized by the shortest unambigious +<p>Each <em>action</em> will be recognized by the shortest unambiguous prefix. The <em>protocols</em> which can be specified are: @@ -341,7 +341,7 @@ form. The valid <em>commands</em> are: <descrip> <tag/list/List the chain rule entries. Unless the <bf>-s</bf> flag is -given, the format is compatable with the command line syntax. +given, the format is compatible with the command line syntax. <tag/flush/Flush the chain rule entries. @@ -436,7 +436,7 @@ possible attacks and also modification of the firewall rules if your requirements alter. <quote><bf>Note:</BF> If you use the logging versions of the -<bf>accept</bf> command, it can generate <em>large</em> ammounts +<bf>accept</bf> command, it can generate <em>large</em> amounts of log data as one log line will be generated for every packet that passes through the firewall, so large ftp/http transfers, etc, will really slow the system down. It also increases the @@ -469,14 +469,14 @@ will allow the script to be fed into /bin/sh and reload the rules into the kernel. Perhaps not the most efficient way, but it works. <p>The next problem is what your firewall should actually <bf>DO</bf>! -This is largely dependant on what access to your network you want to +This is largely dependent on what access to your network you want to allow from the outside, and how much access to the outside world you want to allow from the inside. Some general rules are: <itemize> <item>Block all incoming access to ports below 1000 for TCP. This is -where most of the security sensitive services are, like finger, smtp +where most of the security sensitive services are, like finger, SMTP (mail) and telnet. <item>Block incoming SYN connections to ports between 1001 and 1024 @@ -488,7 +488,7 @@ outside, then extend the above suggestion to cover ports 1-1024. useful services that travel over UDP, and what useful traffic there is is normally a security threat (e.g. Suns RPC and NFS protocols). This has its disadvantages also, since UDP is a connectionless protocol, -denying incoming UDP traffic also blocks the replies to outoing UDP +denying incoming UDP traffic also blocks the replies to outgoing UDP traffic. This can cause a problem for people (on the inside) using external archie (prospero) servers. If you want to allow access to archie, you'll have to allow packets coming from ports 191 and 1525 @@ -497,7 +497,7 @@ you may consider allowing through, which comes from port 123. <item>Block traffic to port 6000 from the outside. Port 6000 is the port used for access to X11 servers, and can be a security threat -(especially if people are in the habbit of doing <tt>xhost +</tt> on +(especially if people are in the habit of doing <tt>xhost +</tt> on their workstations). X11 can actually use a range of ports starting at 6000, the upper limit being how many X displays you can run on the machine. The upper limit as defined by RFC 1700 (Assigned Numbers) is @@ -509,7 +509,7 @@ normally fall outside the 1-1024 range specified above. </itemize> -<p>Of course, if you want to make sure that no un-authorised traffic +<p>Of course, if you want to make sure that no un-authorized traffic gets through the firewall, change the default policy to ``deny''. This will mean that any traffic which is allowed through has to be specified explicitly in an ``accept'' or ``allow'' filter rule. Which diff --git a/share/doc/handbook/handbook.sgml b/share/doc/handbook/handbook.sgml index 1d41b81..c3fcada 100644 --- a/share/doc/handbook/handbook.sgml +++ b/share/doc/handbook/handbook.sgml @@ -1,4 +1,4 @@ -<!-- $Id: handbook.sgml,v 1.37 1995/12/07 13:22:14 jkh Exp $ --> +<!-- $Id: handbook.sgml,v 1.38 1995/12/21 17:16:29 jfieber Exp $ --> <!-- The FreeBSD Documentation Project --> <!DOCTYPE linuxdoc PUBLIC "-//FreeBSD//DTD linuxdoc//EN" [ @@ -103,9 +103,9 @@ Web server">. <chapt><heading>PPP and SLIP</heading> - <p>If your connection to the internet is through a modem, or + <p>If your connection to the Internet is through a modem, or you wish to provide other people with dialup connections to - the internet using FreeBSD, you have the option of using PPP + the Internet using FreeBSD, you have the option of using PPP or SLIP. Furthermore, two varieties of PPP are provided: <em>user</em> (sometimes referred to as iijppp) and <em>kernel</em>. The procedures for configuring both types diff --git a/share/doc/handbook/history.sgml b/share/doc/handbook/history.sgml index f0a6cc3..7b250b4 100644 --- a/share/doc/handbook/history.sgml +++ b/share/doc/handbook/history.sgml @@ -1,4 +1,4 @@ -<!-- $Id: history.sgml,v 1.11 1995/11/24 07:55:26 jkh Exp $ --> +<!-- $Id: history.sgml,v 1.12 1995/12/29 01:27:38 jkh Exp $ --> <!-- The FreeBSD Documentation Project --> <sect><heading>A brief history of FreeBSD<label id="history"></heading> @@ -105,7 +105,7 @@ contrary, and anyone is free to contribute code or ideas. Once a contributor has established a reasonable track record for reliability, we generally, in fact, give them write access to the project's CVS repository, where their changes can propagate automatically to other users of FreeBSD. Our -centralised development model is designed for the convenience of the +centralized development model is designed for the convenience of the <em>users</em> of FreeBSD, who are thereby provided with an easy way of tracking one central code base, not to keep potential contributors out! Individuals who've shown a consistent and significant dedication to the project diff --git a/share/doc/handbook/hw.sgml b/share/doc/handbook/hw.sgml index db3427e..ab36834 100644 --- a/share/doc/handbook/hw.sgml +++ b/share/doc/handbook/hw.sgml @@ -1,4 +1,4 @@ -<!-- $Id: hw.sgml,v 1.10 1995/12/03 00:17:57 jkh Exp $ --> +<!-- $Id: hw.sgml,v 1.11 1995/12/11 15:09:13 jkh Exp $ --> <!-- The FreeBSD Documentation Project --> <!-- @@ -10,7 +10,7 @@ <p>Issues of hardware compatibility are among the most troublesome in the computer industry today and FreeBSD is by no means immune to trouble. In this respect, FreeBSD's - advantage of being able to run on inexpensive commidity PC + advantage of being able to run on inexpensive commodity PC hardware is also its liability when it comes to support for the amazing variety of components on the market. While it would be impossible to provide a exhaustive listing of @@ -77,7 +77,7 @@ Slippery when wet. Beware of dog. but would welcome any reports on its performance. <sect2><heading>Disk drives</heading> - <p>In this particular game of russian roulette, I'll make few specific + <p>In this particular game of Russian roulette, I'll make few specific recommendations except to say "SCSI over IDE whenever you can afford it." Even in small desktop configurations, SCSI often makes more sense since it allows you to migrate drives from server to desktop as falling drive @@ -113,7 +113,7 @@ Slippery when wet. Beware of dog. <p>I can recommend the <htmlurl url="http://www.smc.com/" name="SMC"> Ultra 16 controller for any ISA application and the SMC EtherPower or Compex ENET32 cards for any serious PCI based networking. Both of - the PCI cards are based around DEC's DC21041 ethernet controller + the PCI cards are based around DEC's DC21041 Ethernet controller chip and other cards using it, such as the Zynx ZX342 or DEC DE435, will generally work as well. @@ -238,7 +238,7 @@ device sio11 at isa? port 0x138 tty flags 0xb05 irq 9 vector siointr 1995.</em> The procedures to make a Boca 16 pord board with - FreeBSD are pretty straighforward, but you will need + FreeBSD are pretty straightforward, but you will need a couple things to make it work: <enum> @@ -264,7 +264,7 @@ device sio11 at isa? port 0x138 tty flags 0xb05 irq 9 vector siointr If you do not already have a custom kernel configuration file set up, refer to <ref id="kernelconfig" name="Kernel Configuration"> for - general procedurs. The following are the specifics + general procedures. The following are the specifics for the Boca 16 board and assume you are using the kernel name MYKERNEL and editing with vi. @@ -285,7 +285,7 @@ to the config file. The following example is for a Boca Board with an interrupt of 3, and a base IO address 100h. The - IO address for Each port is +8 hexidecimal from + IO address for Each port is +8 hexadecimal from the previous port, thus the 100h, 108h, 110h... addresses. @@ -370,7 +370,7 @@ sio16: type 16550A (multiport master) > more</tt> will show you the boot messages.</item> - <item>Next, apprepriate entries in <tt>/dev</tt> for the devices + <item>Next, appropriate entries in <tt>/dev</tt> for the devices must be made using the <tt>/dev/MAKEDEV</tt> script. After becoming root: <tscreen> diff --git a/share/doc/handbook/install.sgml b/share/doc/handbook/install.sgml index ea6223a..e4ba3dc 100644 --- a/share/doc/handbook/install.sgml +++ b/share/doc/handbook/install.sgml @@ -1,4 +1,4 @@ -<!-- $Id: install.sgml,v 1.20 1995/12/04 17:58:40 jfieber Exp $ --> +<!-- $Id: install.sgml,v 1.21 1995/12/21 16:10:22 jfieber Exp $ --> <!-- The FreeBSD Documentation Project --> <!-- @@ -35,7 +35,7 @@ configurations"> section of this installation guide to be sure that your hardware is supported by FreeBSD. It may be helpful to make a list of any special cards you - have installed, such as SCSI controllers, ethernet + have installed, such as SCSI controllers, Ethernet adapters or sound cards. This list should include relevant configuration parameters such as interrupts (IRQ) and IO port addresses. </item> @@ -160,7 +160,7 @@ Boot: To run the X-window system, eight megabytes of RAM is the recommended minimum. - Following is a list of all disk controllers and ethernet + Following is a list of all disk controllers and Ethernet cards currently known to work with FreeBSD. Other configurations may very well work, and we have simply not received any indication of this. @@ -230,7 +230,7 @@ Boot: time: <itemize> - <item>Soundblaster SCSI and ProAudio Spectrum SCSI (<tt>cd</tt>) + <item>SoundBlaster SCSI and ProAudio Spectrum SCSI (<tt>cd</tt>) <item>Mitsumi (all models) proprietary interface (<tt>mcd</tt>) <item>Matsushita/Panasonic (Creative) CR-562/CR-563 proprietary interface (<tt>matcd</tt>) @@ -247,7 +247,7 @@ Boot: <item>Allied-Telesis AT1700 and RE2000 cards - <item>SMC Elite 16 WD8013 ethernet interface, and + <item>SMC Elite 16 WD8013 Ethernet interface, and most other WD8003E, WD8003EBT, WD8003W, WD8013W, WD8003S, WD8003SBT and WD8013EBT based clones. SMC Elite Ultra is also supported. @@ -297,7 +297,7 @@ Boot: Semiconductor are also supported. </itemize> - <p><em>Note:</em> FreeBSD does not currently suppport + <p><em>Note:</em> FreeBSD does not currently support PnP (plug-n-play) features present on some ethernet cards. If your card has PnP and is giving you problems, try disabling its PnP features. @@ -717,11 +717,11 @@ ftp://foo.bar.com:1234/pub/FreeBSD <item>Select a Custom or Express install, depending on whether or not you would like the installation to give you a high degree of control over each step of the - installation or simply lead you through it, chosing + installation or simply lead you through it, choosing reasonable defaults when possible. See details on both installation types below. - <item>The Configure menu choice allows you to furthur + <item>The Configure menu choice allows you to further configure your FreeBSD installation by giving you menu-driven access to various system defaults. Some items, like networking, may be especially important @@ -771,7 +771,7 @@ ftp://foo.bar.com:1234/pub/FreeBSD your disk so far, nor will it until you give the final confirmation). All new or changed partition information will be written out, file systems will - be created and/or non-destructively labelled + be created and/or non-destructively labeled (depending on how you set their newfs flags in the Label Editor) and all selected distributions will be extracted. @@ -796,7 +796,7 @@ ftp://foo.bar.com:1234/pub/FreeBSD altering your system <em>except</em> for ``Commit'', which will perform any requests to alter your system you may have made. Some of the menu options will also - have direct `Write' commands available for commiting an + have direct `Write' commands available for committing an operation immediately, but they should only be used if you are absolutely sure it is necessary. It is generally better to make your changes and then commit them all at diff --git a/share/doc/handbook/kernelconfig.sgml b/share/doc/handbook/kernelconfig.sgml index bc26d37..86fda45 100644 --- a/share/doc/handbook/kernelconfig.sgml +++ b/share/doc/handbook/kernelconfig.sgml @@ -1,4 +1,4 @@ -<!-- $Id: kernelconfig.sgml,v 1.6 1996/01/20 06:11:35 nate Exp $ --> +<!-- $Id: kernelconfig.sgml,v 1.7 1996/01/20 06:28:11 nate Exp $ --> <!-- The FreeBSD Documentation Project --> <!-- <!DOCTYPE linuxdoc PUBLIC '-//FreeBSD//DTD linuxdoc//EN'> --> <chapt><heading>Configuring the FreeBSD Kernel<label id="kernelconfig"></heading> @@ -274,15 +274,15 @@ <tag>options MATH_EMULATE</tag> <p>This line allows the kernel to simulate a math - coprocessor if your computer does not have one (386 + co-processor if your computer does not have one (386 or 486SX). If you have a Pentium, a 486DX, or a 386 or 486SX with a separate 387 or 487 chip, you can comment this line out. - <quote><em>Note:</em> The normal math coprocessor + <quote><em>Note:</em> The normal math co-processor emulation routines that come with FreeBSD are <em>not</em> very accurate. If you do not have a - math coprocessor, and you need the best accuracy, + math co-processor, and you need the best accuracy, I recommend that you change this option to <tt>GPL_MATH_EMULATE</tt> to use the superior GNU math support, which is not included by default @@ -297,7 +297,7 @@ <tag>options BOUNCE_BUFFERS</tag> <p>ISA devices and EISA devices operating in an ISA - compatibilty mode can only perform DMA (Direct + compatibility mode can only perform DMA (Direct Memory Access) to memory below 16 megabytes. This option enables such devices to work in systems with more than 16 megabytes of memory. @@ -517,7 +517,7 @@ drivers are for the so-called <em>proprietary</em> CD-ROM drives. These drives have their own controller card or might plug into a sound card - such as the Soundblaster 16. They are <em>not</em> + such as the SoundBlaster 16. They are <em>not</em> IDE or SCSI. Most older single-speed and double-speed CD-ROMs use these interfaces, while newer quad-speeds are likely to be <ref @@ -538,7 +538,7 @@ <tag>controller matcd0 at isa? port ? bio</tag> <p>Matsushita/Panasonic CD-ROM (sold by Creative - Labs for Soundblaster). + Labs for SoundBlaster). </descrip> @@ -949,7 +949,7 @@ <p>SoundBlaster digital audio. - <quote><em/Note:/ If your Soundblaster is on a + <quote><em/Note:/ If your SoundBlaster is on a different IRQ (such as 5), change <tt>irq 7</tt> to, for example, <tt>irq 5</tt> and remove the <tt>conflicts</tt> keyword. Also, you must add diff --git a/share/doc/handbook/kerneldebug.sgml b/share/doc/handbook/kerneldebug.sgml index 7996c89..24744b8 100644 --- a/share/doc/handbook/kerneldebug.sgml +++ b/share/doc/handbook/kerneldebug.sgml @@ -1,4 +1,4 @@ -<!-- $Id: kerneldebug.sgml,v 1.5 1995/10/22 00:42:10 jfieber Exp $ --> +<!-- $Id: kerneldebug.sgml,v 1.6 1996/01/03 11:10:30 gclarkii Exp $ --> <!-- The FreeBSD Documentation Project --> <chapt><heading>Kernel Debugging<label id="kerneldebug"></heading> @@ -330,7 +330,7 @@ <tscreen><verb> x ,10 </verb></tscreen> - Similiarly, use + Similarly, use <tscreen><verb> x/ia foofunc,10 </verb></tscreen> @@ -401,7 +401,7 @@ is the final way out of disaster and almost the same as hitting the Big Red Button. - If you nead a short command summary, simply type + If you need a short command summary, simply type <tscreen><verb> help </verb></tscreen> diff --git a/share/doc/handbook/nutshell.sgml b/share/doc/handbook/nutshell.sgml index df5998b..63b5956 100644 --- a/share/doc/handbook/nutshell.sgml +++ b/share/doc/handbook/nutshell.sgml @@ -1,4 +1,4 @@ -<!-- $Id: nutshell.sgml,v 1.6 1995/09/17 10:56:37 davidg Exp $ --> +<!-- $Id: nutshell.sgml,v 1.7 1995/12/19 09:22:23 gclarkii Exp $ --> <!-- The FreeBSD Documentation Project --> <sect><heading>FreeBSD in a nutshell<label id="nutshell"></heading> @@ -20,7 +20,7 @@ SHARED BETWEEN ALL users on the system.</item> <item>Complete <bf>TCP/IP networking</bf> including SLIP, PPP, NFS and NIS support. This means that your FreeBSD machine can - interoperate easily with other systems as well act as an enterprise + inter-operate easily with other systems as well act as an enterprise server, providing vital functions such as NFS (remote file access) and e-mail services or putting your organization on the Internet with WWW, ftp, routing and firewall (security) services.</item> diff --git a/share/doc/handbook/porting.sgml b/share/doc/handbook/porting.sgml index a9d454d..9d19d6b 100644 --- a/share/doc/handbook/porting.sgml +++ b/share/doc/handbook/porting.sgml @@ -1,4 +1,4 @@ -<!-- $Id: porting.sgml,v 1.11 1995/12/07 13:22:15 jkh Exp $ --> +<!-- $Id: porting.sgml,v 1.12 1996/01/28 16:36:24 jfieber Exp $ --> <!-- The FreeBSD Documentation Project --> <sect1><heading>Porting an existing piece of free software<label id="porting"></heading> @@ -19,7 +19,7 @@ running under FreeBSD. <p>What follows are some guidelines for creating a new port for FreeBSD 2.x . The <tt>${..}</tt> variable names you will -see in this document all refer to various user-overridable defaults +see in this document all refer to various user-overrideable defaults used (and documented) by <tt>/usr/share/mk/bsd.port.mk</tt>. Please refer to that file for more details on the inner workings of the ports collection. @@ -27,7 +27,7 @@ the ports collection. <sect2> <heading>Before Starting the Port<label id="porting:starting"></heading> - <p>Note: Only a fraction of the overridable variables are + <p>Note: Only a fraction of the overrideable variables are mentioned in this document. Most (if not all) are documented at the start of the <tt>bsd.port.mk</tt> file which can be found in <tt>/usr/share/mk</tt>. This file uses a non-standard tab @@ -99,7 +99,7 @@ the ports collection. OK to use <tt>__FreeBSD__</tt> and `<tt>#if __FreeBSD__ > 1</tt>' to detect a FreeBSD 2.x system. - If you need more granduarity in detecting FreeBSD systems since + If you need more granularity in detecting FreeBSD systems since 2.0-RELEASE you can use the following: <tscreen><verb> @@ -156,7 +156,7 @@ The pattern is the year followed by the month. # Date created: 5 December 1994 # Whom: asami # - # $Id: porting.sgml,v 1.11 1995/12/07 13:22:15 jkh Exp $ + # $Id: porting.sgml,v 1.12 1996/01/28 16:36:24 jfieber Exp $ # DISTNAME= oneko-1.1b @@ -911,7 +911,7 @@ lib/libtcl.so.7.3 person who wrote this Makefile] # Whom: Satoshi Asami <asami@FreeBSD.ORG> # - # $Id: porting.sgml,v 1.11 1995/12/07 13:22:15 jkh Exp $ + # $Id: porting.sgml,v 1.12 1996/01/28 16:36:24 jfieber Exp $ [ ^^^^ don't worry about this...it will be automatically filled in by CVS when it is committed to our repository] # diff --git a/share/doc/handbook/printing.sgml b/share/doc/handbook/printing.sgml index 93d3dfc..ba113c2 100644 --- a/share/doc/handbook/printing.sgml +++ b/share/doc/handbook/printing.sgml @@ -1,7 +1,7 @@ <!-- This is an SGML document in the linuxdoc DTD describing Printing with FreeBSD. By Sean Kelly, 1995. - $Id: printing.sgml,v 1.2 1995/10/01 22:16:19 jfieber Exp $ + $Id: printing.sgml,v 1.3 1995/12/04 17:58:47 jfieber Exp $ The FreeBSD Documentation Project @@ -399,7 +399,7 @@ cd /dev <item>The <em/interrupt-driven/ method is the default with the GENERIC kernel. With this method, the operating system uses an IRQ line to determine when - the printer's ready for data. + the printer is ready for data. <item>The <em/polled/ method directs the operating system to repeatedly ask the printer if it's ready @@ -424,7 +424,7 @@ cd /dev <tt/lpt2/ for the third port, and so on. <itemize> <item>If you want interrupt-driven mode, add the <tt/irq/ - specifer: + specifier: <tscreen> <tt>device lpt0 at isa? port? tty irq <it/N/ vector lptintr</tt> </tscreen> @@ -495,7 +495,7 @@ showpage functionality, you can intermingle plain text with its escape sequences. PostScript cannot directly print plain text, and that's the kind of printer language for - which we must make special accomodations. + which we must make special accommodations. <sect4><heading>Checking a Parallel Printer<label id="printing:checking:parallel"></heading> @@ -657,7 +657,7 @@ tip printer printer, and note it in <tt>/etc/printcap</tt> with the <tt/lp/ capability; see <ref id="printing:device" name="Identifying the Printer Device">. Also, if the - printer's on a serial port, set up the communication + printer is on a serial port, set up the communication parameters with the <tt/fs/, <tt/fc/, <tt/xs/, and <tt/xc/ capabilities; see <ref id="printing:commparam" name="Configuring Spooler Communications Parameters">. @@ -687,7 +687,7 @@ tip printer add an additional step to the simple setup outlined above: install an automatic plain-text--to--PostScript (or other printer language) conversion program. Section <ref - id="printing:advanced:if-conversion" name="Accomodating + id="printing:advanced:if-conversion" name="Accommodating Plain Text Jobs on PostScript Printers"> tells how to do this. @@ -960,7 +960,7 @@ bamboo|ps|PS|S|panasonic|Panasonic KX-P4455 PostScript v51.4:\ input to the job to print, and its standard output to the printer device specified with the <tt/lp/ capability. The filter is expected to read the job from - standard input, peform any necessary translation for the + standard input, perform any necessary translation for the printer, and write the results to standard output, which will get printed. For more information on the text filter, see section <ref id="printing:advanced:filters" @@ -1069,13 +1069,13 @@ $%&ero;'()*+,-./01234567 id="printing:troubleshooting"></heading> <p> After performing the simple test with <tt/lptest/, you - might've gotten one of the following results instead of + might have gotten one of the following results instead of the correct printout: <descrip> <tag/It worked, after awhile; or, it didn't eject a full sheet./ The printer printed the above, but it sat for awhile - and did nothing. In fact, you might've needed to + and did nothing. In fact, you might have needed to press a PRINT REMAINING or FORM FEED button on the printer to get any results to appear. @@ -1231,7 +1231,7 @@ Printer received LF Printer prints CR + LF <tag/The printer lost characters./ While printing, the printer didn't print a few - characters in each line. The problem might've + characters in each line. The problem might have gotten worse as the printer ran, losing more and more characters. @@ -1552,7 +1552,7 @@ lpr -P bamboo -d fish-report.dvi Print literal text data, including control characters. - <tag/<tt/-n// Print ditroff (device indepdendent troff) data. + <tag/<tt/-n// Print ditroff (device independent troff) data. <tag/-p/ @@ -1743,7 +1743,7 @@ lpr -#3 parser.c parser.h This command is useful while you're testing a new printer or filter installation: disable the queue and submit jobs as root. Other users won't be able to - submit jobs until you complete your testing and reenable + submit jobs until you complete your testing and re-enable the queue with the <tt/enable/ command. <tag/<tt/down <it/printer-name/ <it/message.../// @@ -1856,7 +1856,7 @@ lpr -#3 parser.c parser.h text by default. This presents a problem for PostScript (or other language-based printers) which can't directly print plain text. Section <ref - id="printing:advanced:if-conversion" name="Accomodating + id="printing:advanced:if-conversion" name="Accommodating Plain Text Jobs on PostScript Printers"> tells you what you should do to overcome this problem. I recommend reading this section if you have a PostScript printer. @@ -2099,7 +2099,7 @@ lpr -#3 parser.c parser.h You should also specify the <tt/rw/ capability; that tells LPD to open the printer in read-write mode. - If you have a parralel PostScript printer (and therefore + If you have a parallel PostScript printer (and therefore can't use two-way communication with the printer, which <tt/lprps/ needs), you can use the following shell script as the text filter: @@ -2142,7 +2142,7 @@ fi <p> PostScript is the <it/de facto/ standard for high quality typesetting and printing. PostScript is, however, an <em/expensive/ standard. Thankfully, Alladin - Enterprises has a free PostScript workalike called + Enterprises has a free PostScript work-alike called <it/Ghostscript/ that runs with FreeBSD. Ghostscript can read most PostScript files and can render their pages onto a variety of devices, including many brands of @@ -2343,7 +2343,7 @@ exec /usr/local/bin/dvips -f | /usr/local/libexec/lprps "$@" argument) on standard input, which is the job to print. It then starts the PostScript printer filter <tt/lprps/ (see section <ref id="printing:advanced:if-conversion" - name="Accomodating Plain Text Jobs on PostScript + name="Accommodating Plain Text Jobs on PostScript Printers">) with the arguments LPD passed to this script. <tt/lprps/ will use those arguments to account for the pages printed. @@ -2633,12 +2633,12 @@ exit 0 this is probably <em/not/ what you want. In almost all cases, you need a text filter. - The program <tt/lpf/, whch we introduced earlier as a text + The program <tt/lpf/, which we introduced earlier as a text filter, can also run as an output filter. If you need a quick-and-dirty output filter but don't want to write the byte detection and signal sending code, try <tt/lpf/. You can also wrap <tt/lpf/ in a shell script to handle any - intialization codes the printer might require. + initialization codes the printer might require. <sect2><heading><tt/lpf/: a Text Filter<label id="printing:advanced:lpf"></heading> @@ -3349,7 +3349,7 @@ bamboo|ps|PS|S|panasonic|Panasonic KX-P4455 PostScript v51.4:\ By using the <tt/sc/ capability, we prevent the use of <tt/lpr -#/, but that still doesn't prevent users from running <tt/lpr/ multiple times, or from submitting the - same file mutliple times in one job like this: + same file multiple times in one job like this: <tscreen><verb> lpr forsale.sign forsale.sign forsale.sign forsale.sign forsale.sign </verb></tscreen> @@ -3696,7 +3696,7 @@ total 337.00 154 $ 6.74 Compute charges with <it/price/ dollars per page or per foot instead of the price from the <tt/pc/ - capabilty in <tt>/etc/printcap</tt>, or two cents (the + capability in <tt>/etc/printcap</tt>, or two cents (the default). You can specify <it/price/ as a floating point number. @@ -3737,7 +3737,7 @@ total 337.00 154 $ 6.74 want to charge for printouts in this capability. You can override this value when you run <tt/pac/ with the <tt/-p/ option. The units for the <tt/-p/ option are in dollars, - though, not hundreths of cents. For example, + though, not hundredths of cents. For example, <tscreen><verb> pac -p1.50 </verb></tscreen> @@ -3857,7 +3857,7 @@ pac -p1.50 <sect><heading>Acknowledgments</heading> - <p> I'd like to thank the following people who've assisted in + <p> I'd like to thank the following people who have assisted in the development of this document: <descrip> diff --git a/share/doc/handbook/relnotes.sgml b/share/doc/handbook/relnotes.sgml index e205b8c..9b09846 100644 --- a/share/doc/handbook/relnotes.sgml +++ b/share/doc/handbook/relnotes.sgml @@ -1,4 +1,4 @@ -<!-- $Id: relnotes.sgml,v 1.7 1995/11/20 01:10:28 jfieber Exp $ --> +<!-- $Id: relnotes.sgml,v 1.8 1995/12/07 13:22:16 jkh Exp $ --> <!-- The FreeBSD Documentation Project --> <!-- @@ -534,7 +534,7 @@ emulator is in its early stages and has not been extensively tested, but it is functional. Most of SCO's 3.2.2 binaries work, as does an old - INFORMIX-2.10 for SCO. Further testing is nessesary + INFORMIX-2.10 for SCO. Further testing is necessary to complete this project. There is also work under way for ELF and XOUT loaders, and most of the svr4 syscall wrappers are written. @@ -554,9 +554,9 @@ you can!). The preferred method to submit bug reports from a machine - with internet mail connectivity is to use the send-pr + with Internet mail connectivity is to use the send-pr command. Bug reports will be dutifully filed by our - faithful bugfiler program and you can be sure that we'll + faithful bug-filer program and you can be sure that we'll do our best to respond to all reported bugs as soon as possible. diff --git a/share/doc/handbook/routing.sgml b/share/doc/handbook/routing.sgml index 5441cce..d108092 100644 --- a/share/doc/handbook/routing.sgml +++ b/share/doc/handbook/routing.sgml @@ -1,4 +1,4 @@ -<!-- $Id$ --> +<!-- $Id: routing.sgml,v 1.1 1995/10/07 04:31:41 jfieber Exp $ --> <!-- The FreeBSD Documentation Project --> <!-- <!DOCTYPE linuxdoc PUBLIC '-//FreeBSD//DTD linuxdoc//EN'> --> @@ -161,7 +161,7 @@ host2.foobar.com link#1 UC 0 0 ISP's Terminal Server. Your ISP has a local network at their site, which has, among other things, the server where you connect and a hardware device (T1-GW) attached - to the ISP's internet feed. + to the ISP's Internet feed. The default routes for each of your machines will be: @@ -206,12 +206,12 @@ Local1 (10.20.30.1, 10.9.9.30) --> T1-GW (10.9.9.1) networks. In one case, the machine as two ethernet cards, each - having an address on the seperate subnets. Alternately, + having an address on the separate subnets. Alternately, the machine may only have one ethernet card, and be using ifconfig aliasing. The former is used if two physically separate ethernet networks are in use, the latter if there is one physical network segment, but two logically - seperate subnets. + separate subnets. Either way, routing tables are set up so that each subnet knows that this machine is the defined gateway (inbound @@ -220,7 +220,7 @@ Local1 (10.20.30.1, 10.9.9.30) --> T1-GW (10.9.9.1) often used when we need to implement packet filtering or firewall security in either or both directions. - <sect1><heading>Routing propogation</heading> + <sect1><heading>Routing propagation</heading> <p>We have already talked about how we define our routes to the outside world, but not about how the outside world @@ -242,7 +242,7 @@ Local1 (10.20.30.1, 10.9.9.30) --> T1-GW (10.9.9.1) information) that keeps track of all assigned address-spaces, and defines their point of connection to the Internet Backbone. The ``Backbone'' are the main - trunk lines that carry internet traffic across the + trunk lines that carry Internet traffic across the country, and around the world. Each backbone machine has a copy of a master set of tables, which direct traffic for a particular network to a specific backbone carrier, @@ -252,7 +252,7 @@ Local1 (10.20.30.1, 10.9.9.30) --> T1-GW (10.9.9.1) It is the task of your service provider to advertise to the backbone sites that they are the point of connection (and thus the path inward) for your site. This is known - as route propogation. + as route propagation. <!-- <sect1><heading>Multicast Routing</heading> @@ -260,7 +260,7 @@ Local1 (10.20.30.1, 10.9.9.30) --> T1-GW (10.9.9.1) <sect1><heading>Troubleshooting</heading> - <p>Sometimes, there is a problem with routing propogation, + <p>Sometimes, there is a problem with routing propagation, and some sites are unable to connect to you. Perhaps the most useful command for trying to figure out where a routing is breaking down is the <tt>traceroute(8)</tt> diff --git a/share/doc/handbook/scsi.sgml b/share/doc/handbook/scsi.sgml index 0f0b9b4..7923747 100644 --- a/share/doc/handbook/scsi.sgml +++ b/share/doc/handbook/scsi.sgml @@ -1,4 +1,4 @@ -<!-- $Id: scsi.sgml,v 1.9 1995/11/25 20:00:49 jkh Exp $ --> +<!-- $Id: scsi.sgml,v 1.10 1995/12/04 17:58:50 jfieber Exp $ --> <!-- The FreeBSD Documentation Project --> <!-- @@ -224,7 +224,7 @@ is important to get clean signals on the bus, without reflections or ringing. If you once made a long distance telephone call on a bad line you probably know what reflections - are. With 20Mbytes/sec travelling over your SCSI bus, you + are. With 20Mbytes/sec traveling over your SCSI bus, you don't want signals echoing back. Terminators come in various incarnations, with more or less @@ -259,7 +259,7 @@ by far the most misunderstood part of SCSI. And it is by far the simplest.. The rule is: <bf>every SCSI bus has 2 (two) terminators, one at each end of the bus.</bf> So, two and not - one or three or whatever. Do yourself a favour and stick to + one or three or whatever. Do yourself a favor and stick to this rule. It will save you endless grief, because wrong termination has the potential to introduce highly mysterious bugs. @@ -456,7 +456,7 @@ asked for a geometry , it is nearly always better to supply the geometry used by the BIOS, or <em>if the BIOS is never going to know about this disk</em>, (e.g. it is not a booting disk) to supply a - ficticious geometry that is convenient. + fictitious geometry that is convenient. <sect3><heading>SCSI subsystem design</heading> <p> @@ -476,7 +476,7 @@ The multi level design allows a decoupling of low-level bit banging and more high level stuff. Adding support for another - piece of hardware is a much more managable problem. + piece of hardware is a much more manageable problem. <sect3><heading>Kernel configuration</heading> <p> @@ -554,7 +554,7 @@ device cd0 at scbus? [the first ever CDROM found, no wiring] to unit number 1. Note that <em>wired down devices need not be found</em> to get their unit number. The unit number for a wired down device - is reserved for thet device, even if it is turned off at boot + is reserved for that device, even if it is turned off at boot time. This allows the device to be turned on and brought on-line at a later time, without rebooting. Notice that a device's unit number has <em>no</em> relationship with it's target ID on @@ -706,7 +706,7 @@ options "TUNE_1542" #dynamic tune of bus DMA speed <item> Check for loose connectors and cables. <item> - Check and doublecheck the location and number of your terminators. + Check and double check the location and number of your terminators. <item> Check if your bus has at least one supplier of terminator power (especially with external terminators. diff --git a/share/doc/handbook/skey.sgml b/share/doc/handbook/skey.sgml index 865e2ca..70d14db 100644 --- a/share/doc/handbook/skey.sgml +++ b/share/doc/handbook/skey.sgml @@ -1,4 +1,4 @@ -<!-- $Id: skey.sgml,v 1.2 1995/09/26 19:12:28 wollman Exp $ --> +<!-- $Id: skey.sgml,v 1.3 1995/10/07 04:31:56 jfieber Exp $ --> <!-- The FreeBSD Documentation Project --> <!-- Copyright 1995 Massachusetts Institute of Technology @@ -146,7 +146,7 @@ command: $ keyinit -s Updating wollman: Old key: kh94741 -Reminder you need the 6 english words from the skey command. +Reminder you need the 6 English words from the skey command. Enter sequence count from 1 to 9999: 100 ) I typed this Enter new key [default kh94742]: s/key 100 kh94742 @@ -294,7 +294,7 @@ authentication. <p>The second line (`<tt/permit user/') allows the specified user to use UNIX passwords at any time. Generally speaking, this should only be used for people who are either unable to use the `<tt/key/' -program, like those with dumb terminls, or those who are uneducable. +program, like those with dumb terminals, or those who are uneducable. <p>The third line (`<tt/permit port/') allows all users logging in on the specified terminal line to use UNIX passwords; this would be used diff --git a/share/doc/handbook/slips.sgml b/share/doc/handbook/slips.sgml index 2607c92..3f6c2b9 100644 --- a/share/doc/handbook/slips.sgml +++ b/share/doc/handbook/slips.sgml @@ -12,7 +12,7 @@ Setting up FreeBSD as a SLIP Server --> <sect><heading>Setting up a SLIP server<label id="slips"></heading> -<p><em>Contribudted by &a.ghelmer;.<newline> +<p><em>Contributed by &a.ghelmer;.<newline> v1.0, 15 May 1995.</em> This document provides suggestions for setting up SLIP Server services @@ -489,7 +489,7 @@ appropriate for your system. Please see the manual page for <tt>gated</tt> for information on <tt>gated</tt>'s command-line parameters. -<sect1><heading>Acknowledgements</heading> +<sect1><heading>Acknowledgments</heading> <p> Thanks to these people for comments and advice regarding this tutorial: diff --git a/share/doc/handbook/submitters.sgml b/share/doc/handbook/submitters.sgml index db5a4e5..439d8e9 100644 --- a/share/doc/handbook/submitters.sgml +++ b/share/doc/handbook/submitters.sgml @@ -1,4 +1,4 @@ -<!-- $Id: submitters.sgml,v 1.13 1996/01/05 08:36:27 jkh Exp $ --> +<!-- $Id: submitters.sgml,v 1.14 1996/01/05 08:47:37 jkh Exp $ --> <!-- The FreeBSD Documentation Project --> <chapt><heading>Contributing to FreeBSD<label id="submitters"></heading> @@ -27,8 +27,8 @@ highly specialized types of kernel development. No matter what your skill level, there's almost certainly something you can do to help the project! -<p>Commmercial entities engaged in FreeBSD-related enterprises are -also encouraged to contact us. Need a special extention to make your +<p>Commercial entities engaged in FreeBSD-related enterprises are +also encouraged to contact us. Need a special extension to make your product work? You'll find us receptive to your requests, given that they aren't too outlandish. Working on a value-added product? Please let us know! We may be able to work cooperatively on some aspect of @@ -87,7 +87,7 @@ for V86 machines by the protected mode kernel. text areas in the default kernel executable so that that portion of the kernel address space may be recovered at a later time, after hardware specific protected mode drivers have been loaded -and activated. This includes seperation of BIOS based drivers +and activated. This includes separation of BIOS based drivers from each other, since it is better to run with a BIOS based driver in all cases than to not run at all. @@ -107,9 +107,9 @@ device space resource usage by fixed devices. Specifically, a device centric registration mechanism for timer and sound and other system critical service providers. Consider Timer2 and Timer0 and speaker services as one example of a single -monithic service provider. +monolithic service provider. -<item>A kernel exported symbol space in the kernel data space acessable +<item>A kernel exported symbol space in the kernel data space accessible by an LKM loader mechanism that does relocation and symbol space manipulation. The intent of this interface is to support the ability to demand load and unload kernel modules. @@ -145,7 +145,7 @@ preemption). somewhat handled by changing PCMCIA bridging rules and power management event handling. But there are things like detecting internal vs. external display and picking a different screen -resoloution based on that fact, not spinning down the disk if +resolution based on that fact, not spinning down the disk if the machine is in dock, and allowing dock-based cards to disappear without affecting the machines ability to boot (same issue for PCMCIA). @@ -155,7 +155,7 @@ PCMCIA). <item>A "make world" that "makes the world" (rename the current one to "make regress" if that's all it is good for). -<item>A 4M (preferrably smaller!) memory footprint. +<item>A 4M (preferably smaller!) memory footprint. </enum> @@ -340,7 +340,7 @@ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - $Id: submitters.sgml,v 1.13 1996/01/05 08:36:27 jkh Exp $ + $Id: submitters.sgml,v 1.14 1996/01/05 08:47:37 jkh Exp $ </verb></tscreen> For your convenience, a copy of this text can be found in <tt>/usr/share/examples/etc/bsd-style-copyright</tt>. @@ -392,7 +392,7 @@ this in a note accompanying your donation. Thanks! <sect2><heading>Donating hardware</heading> -<p>Donations of hardware in any of the 3 following catagories are also gladly +<p>Donations of hardware in any of the 3 following categories are also gladly accepted by the FreeBSD Project: <itemize> @@ -414,7 +414,7 @@ such items as we'll need to find a developer willing to take on the task before we can accept delivery of them. </itemize> -<sect2><heading>Donating internet access</heading> +<sect2><heading>Donating Internet access</heading> <p>We can always use new mirror sites for FTP, WWW or sup. If you'd like to be such a mirror, please contact diff --git a/share/doc/handbook/userppp.sgml b/share/doc/handbook/userppp.sgml index f874e45..69f9234 100644 --- a/share/doc/handbook/userppp.sgml +++ b/share/doc/handbook/userppp.sgml @@ -1,4 +1,4 @@ -<!-- $Id: userppp.sgml,v 1.4 1995/12/04 17:58:52 jfieber Exp $ --> +<!-- $Id: userppp.sgml,v 1.5 1995/12/06 22:01:50 jfieber Exp $ --> <!-- The FreeBSD Documentation Project --> <sect>Setting up user PPP<label id="userppp"> @@ -14,13 +14,13 @@ because I am not really much of an authority on PPP. I've got it working, and want to pass on details of what I did so that other people can get it working. But I'm not 100% clear on some - details, so I hope that by writing this and haveing others + details, so I hope that by writing this and having others flesh out some of the information I'm going to learn something as well. --> - <p>User PPP was intruduced to FreeBSD in release 2.0.5 as an - addition to the exisiting kernel implementation of PPP. So, + <p>User PPP was introduced to FreeBSD in release 2.0.5 as an + addition to the existing kernel implementation of PPP. So, what is different about this new PPP that warrants its addition? To quote from the manual page: @@ -63,7 +63,7 @@ <item>Your ISP's netmask setting - <item>IP adresses of one or more nameservers + <item>IP addresses of one or more nameservers <item>If your ISP allocates you a static IP address and/or hostname then you will need that as well. If not, you will need to know from what @@ -262,7 +262,7 @@ protocol: ppp written in the <tt>chat(8)</tt> language. <tag/Line 10:/ Sets the default timeout (in seconds) for the connection. So - the connectioned will be closed automatically after 120 seconds + the connection will be closed automatically after 120 seconds of inactivity. <tag/Line 11:/ Sets the interface addresses. The string x.x.x.x should be |