summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--lib/libc/net/sctp_recvmsg.32
-rw-r--r--lib/libc/net/sctp_sendmsg.32
-rw-r--r--lib/libc/stdlib/malloc.32
-rw-r--r--lib/libc/sys/kqueue.22
-rw-r--r--lib/libc/sys/ptrace.22
-rw-r--r--lib/libcam/cam.32
-rw-r--r--lib/libgpib/gpib.32
-rw-r--r--lib/libpmc/pmc.corei7.32
-rw-r--r--lib/libpmc/pmc.mips.36
-rw-r--r--lib/libpmc/pmc.westmere.32
-rw-r--r--lib/libpmc/pmc.westmereuc.36
-rw-r--r--lib/libusb/libusb.32
-rw-r--r--lib/libutil/property.32
-rw-r--r--libexec/ypxfr/ypxfr.82
-rw-r--r--sbin/fsck/fsck.82
-rw-r--r--sbin/fsck_ffs/fsck_ffs.82
-rw-r--r--sbin/geom/class/part/gpart.82
-rw-r--r--sbin/geom/core/geom.82
-rw-r--r--sbin/ifconfig/ifconfig.84
-rw-r--r--sbin/ping6/ping6.82
-rw-r--r--sbin/sunlabel/sunlabel.82
-rw-r--r--share/man/man4/cmx.44
-rw-r--r--share/man/man4/dc.44
-rw-r--r--share/man/man4/gre.42
-rw-r--r--share/man/man4/meteor.42
-rw-r--r--share/man/man4/net80211.42
-rw-r--r--share/man/man4/ng_car.42
-rw-r--r--share/man/man4/pcii.42
-rw-r--r--share/man/man4/pcm.44
-rw-r--r--share/man/man4/sctp.42
-rw-r--r--share/man/man9/BUS_NEW_PASS.92
-rw-r--r--share/man/man9/ieee80211_vap.92
-rw-r--r--share/man/man9/rman.94
-rw-r--r--usr.bin/du/du.12
-rw-r--r--usr.bin/fstat/fstat.12
-rw-r--r--usr.bin/rwall/rwall.12
-rw-r--r--usr.sbin/bsnmpd/modules/snmp_bridge/snmp_bridge.32
-rw-r--r--usr.sbin/bsnmpd/modules/snmp_wlan/snmp_wlan.34
-rw-r--r--usr.sbin/lpr/lpr/printcap.52
-rw-r--r--usr.sbin/makefs/makefs.82
-rw-r--r--usr.sbin/mfiutil/mfiutil.82
-rw-r--r--usr.sbin/nfsd/stablerestart.52
-rw-r--r--usr.sbin/nfsuserd/nfsuserd.82
-rw-r--r--usr.sbin/ntp/doc/ntp.conf.56
-rw-r--r--usr.sbin/ntp/doc/ntpq.82
45 files changed, 57 insertions, 57 deletions
diff --git a/lib/libc/net/sctp_recvmsg.3 b/lib/libc/net/sctp_recvmsg.3
index eb043ac..8ddbeb8 100644
--- a/lib/libc/net/sctp_recvmsg.3
+++ b/lib/libc/net/sctp_recvmsg.3
@@ -88,7 +88,7 @@ will hold the address of the peer and
.Fa fromlen
will hold the length of that address.
Note that
-the address is bounded by the inital value of
+the address is bounded by the initial value of
.Fa fromlen
which is used as an in/out variable.
.Pp
diff --git a/lib/libc/net/sctp_sendmsg.3 b/lib/libc/net/sctp_sendmsg.3
index 0d5c8df..42193e2 100644
--- a/lib/libc/net/sctp_sendmsg.3
+++ b/lib/libc/net/sctp_sendmsg.3
@@ -72,7 +72,7 @@ Data sent in such an instance will result in
the data being sent on the third leg of the SCTP four-way handshake.
Note that if
the socket is a one-to-one type (SOCK_STREAM) socket then an association must
-be in existance (by use of the
+be in existence (by use of the
.Xr connect 2
system call).
Calling
diff --git a/lib/libc/stdlib/malloc.3 b/lib/libc/stdlib/malloc.3
index 9b9fe96..2f21b6a 100644
--- a/lib/libc/stdlib/malloc.3
+++ b/lib/libc/stdlib/malloc.3
@@ -415,7 +415,7 @@ Allocation requests that are more than half the quantum, but no more than the
minimum cacheline-multiple size class (see the
.Dq Q
option) are rounded up to the nearest multiple of the quantum.
-Allocation requests that are more than the minumum cacheline-multiple size
+Allocation requests that are more than the minimum cacheline-multiple size
class, but no more than the minimum subpage-multiple size class (see the
.Dq C
option) are rounded up to the nearest multiple of the cacheline size (64).
diff --git a/lib/libc/sys/kqueue.2 b/lib/libc/sys/kqueue.2
index 326632d..74cd72a 100644
--- a/lib/libc/sys/kqueue.2
+++ b/lib/libc/sys/kqueue.2
@@ -445,7 +445,7 @@ contains the events which triggered the filter.
.It Dv EVFILT_USER
Establishes a user event identified by
.Va ident
-which is not assosicated with any kernel mechanism but is triggered by
+which is not associated with any kernel mechanism but is triggered by
user level code.
The lower 24 bits of the
.Va fflags
diff --git a/lib/libc/sys/ptrace.2 b/lib/libc/sys/ptrace.2
index 26a55d6..f40574b 100644
--- a/lib/libc/sys/ptrace.2
+++ b/lib/libc/sys/ptrace.2
@@ -335,7 +335,7 @@ and/or memory.
When
.Dv PL_FLAG_SCX
is set, this flag may be additionally specified to inform that the
-program being executed by debuggee process has been changed by succesful
+program being executed by debuggee process has been changed by successful
execution of a system call from the
.Fn execve 2
family.
diff --git a/lib/libcam/cam.3 b/lib/libcam/cam.3
index 3a857b2..25328c2 100644
--- a/lib/libcam/cam.3
+++ b/lib/libcam/cam.3
@@ -382,7 +382,7 @@ returns an allocated and partially initialized CCB, or NULL if allocation
of the CCB failed.
.Pp
.Fn cam_send_ccb
-returns a value of -1 if an error occured, and
+returns a value of -1 if an error occurred, and
.Va errno
is set to indicate the error.
.Pp
diff --git a/lib/libgpib/gpib.3 b/lib/libgpib/gpib.3
index a57d3a4..2b9072e 100644
--- a/lib/libgpib/gpib.3
+++ b/lib/libgpib/gpib.3
@@ -258,7 +258,7 @@ Device requests service
.It SPOLL
Serial Poll
.It EVENT
-Event occured
+Event occurred
.It CMPL
I/O complete
.It LOK
diff --git a/lib/libpmc/pmc.corei7.3 b/lib/libpmc/pmc.corei7.3
index e1cf602..ba973b7 100644
--- a/lib/libpmc/pmc.corei7.3
+++ b/lib/libpmc/pmc.corei7.3
@@ -833,7 +833,7 @@ Counts mispredicted indirect branches that have a rear return mnemonic.
Counts mispredicted non-indirect near calls executed, (should always be 0).
.It Li BR_MISP_EXEC.INDIRECT_NEAR_CALL
.Pq Event 89H , Umask 20H
-Counts mispredicted indirect near calls exeucted, including both register
+Counts mispredicted indirect near calls executed, including both register
and memory indirect.
.It Li BR_MISP_EXEC.NEAR_CALLS
.Pq Event 89H , Umask 30H
diff --git a/lib/libpmc/pmc.mips.3 b/lib/libpmc/pmc.mips.3
index 3fe6825..194838e 100644
--- a/lib/libpmc/pmc.mips.3
+++ b/lib/libpmc/pmc.mips.3
@@ -153,7 +153,7 @@ Floating point instructions completed.
Integer and co-processor loads completed.
.It Li STORE_COMPLETED
.Pq Event 15, Counter 1
-Integer and co-porocessor stores completed.
+Integer and co-processor stores completed.
.It Li BARRIER_COMPLETED
.Pq Event 16, Counter 0
Direct jump (and link) instructions completed.
@@ -225,10 +225,10 @@ valid instruction to the ALU.
Counts the number of cycles where the ALU pipeline cannot advance.
.It Li UNCACHED_LOAD
.Pq Event 33, Counter 0
-Counts uncached and uncached acclerated loads.
+Counts uncached and uncached accelerated loads.
.It Li UNCACHED_STORE
.Pq Event 33, Counter 1
-Counts uncached and uncached acclerated stores.
+Counts uncached and uncached accelerated stores.
.It Li CP2_REG_TO_REG_COMPLETED
.Pq Event 35, Counter 0
Co-processor 2 register to register instructions completed.
diff --git a/lib/libpmc/pmc.westmere.3 b/lib/libpmc/pmc.westmere.3
index 267ac48..af7838f 100644
--- a/lib/libpmc/pmc.westmere.3
+++ b/lib/libpmc/pmc.westmere.3
@@ -775,7 +775,7 @@ Counts mispredicted indirect branches that have a rear return mnemonic.
Counts mispredicted non-indirect near calls executed, (should always be 0).
.It Li BR_MISP_EXEC.INDIRECT_NEAR_CALL
.Pq Event 89H , Umask 20H
-Counts mispredicted indirect near calls exeucted, including both register
+Counts mispredicted indirect near calls executed, including both register
and memory indirect.
.It Li BR_MISP_EXEC.NEAR_CALLS
.Pq Event 89H , Umask 30H
diff --git a/lib/libpmc/pmc.westmereuc.3 b/lib/libpmc/pmc.westmereuc.3
index 6365044..d8a4cef 100644
--- a/lib/libpmc/pmc.westmereuc.3
+++ b/lib/libpmc/pmc.westmereuc.3
@@ -715,7 +715,7 @@ qualified by mask value written to MSR 396H. The following mask values are
supported:
0: NONE 40000000_00000000H:RSPFWDI 40001A00_00000000H:RSPFWDS
40001D00_00000000H:RSPIWB
-Match opcode/addres s by writing MSR 396H with mask supported mask value
+Match opcode/address by writing MSR 396H with mask supported mask value
.It Li ADDR_OPCODE_MATCH.REMOTE
.Pq Event 35H , Umask 02H
Counts number of requests from the remote socket, address/opcode of request
@@ -723,7 +723,7 @@ is qualified by mask value written to MSR 396H. The following mask values
are supported:
0: NONE 40000000_00000000H:RSPFWDI 40001A00_00000000H:RSPFWDS
40001D00_00000000H:RSPIWB
-Match opcode/addres s by writing MSR 396H with mask supported mask value
+Match opcode/address by writing MSR 396H with mask supported mask value
.It Li ADDR_OPCODE_MATCH.LOCAL
.Pq Event 35H , Umask 04H
Counts number of requests from the local socket, address/opcode of request
@@ -731,7 +731,7 @@ is qualified by mask value written to MSR 396H. The following mask values
are supported:
0: NONE 40000000_00000000H:RSPFWDI 40001A00_00000000H:RSPFWDS
40001D00_00000000H:RSPIWB
-Match opcode/addres s by writing MSR 396H with mask supported mask value
+Match opcode/address by writing MSR 396H with mask supported mask value
.It Li QPI_TX_STALLED_SINGLE_FLIT.HOME.LINK_0
.Pq Event 40H , Umask 01H
Counts cycles the Quickpath outbound link 0 HOME virtual channel is stalled
diff --git a/lib/libusb/libusb.3 b/lib/libusb/libusb.3
index 6694fa5..b7967d5 100644
--- a/lib/libusb/libusb.3
+++ b/lib/libusb/libusb.3
@@ -144,7 +144,7 @@ disconnected and a LIBUSB_ERROR code on error.
.
.Ft libusb_device_handle *
.Fn libusb_open_device_with_vid_pid "libusb_context *ctx" "uint16_t vid" "uint16_t pid"
-Conveniance function to open a device with is
+Convenience function to open a device with is
.Fa vid
and
.Fa pid.
diff --git a/lib/libutil/property.3 b/lib/libutil/property.3
index 353f9d6..b363089 100644
--- a/lib/libutil/property.3
+++ b/lib/libutil/property.3
@@ -85,7 +85,7 @@ where
is an alphanumeric string (and any punctuation not including the `=' character)
and
.Fa value
-is an arbitary string of text terminated by a newline character.
+is an arbitrary string of text terminated by a newline character.
If newlines
are desired, the entire value should be enclosed in { } (curly-bracket)
characters.
diff --git a/libexec/ypxfr/ypxfr.8 b/libexec/ypxfr/ypxfr.8
index 462c452..8985bcb 100644
--- a/libexec/ypxfr/ypxfr.8
+++ b/libexec/ypxfr/ypxfr.8
@@ -90,7 +90,7 @@ and fills it with the contents of
.Ar mapname
as supplied by the specified
.Ar source host .
-When the entire map has been transfered,
+When the entire map has been transferred,
.Nm
deletes the original copy of
.Ar mapname
diff --git a/sbin/fsck/fsck.8 b/sbin/fsck/fsck.8
index c7cb0a5..d3f1d4a 100644
--- a/sbin/fsck/fsck.8
+++ b/sbin/fsck/fsck.8
@@ -171,7 +171,7 @@ When running in background mode,
only one file system at a time will be checked.
Note that background
.Nm
-is limited to checking for only the most commonly occuring
+is limited to checking for only the most commonly occurring
file system abnormalities.
Under certain circumstances,
some errors can escape background
diff --git a/sbin/fsck_ffs/fsck_ffs.8 b/sbin/fsck_ffs/fsck_ffs.8
index 6a795b7..d88689b 100644
--- a/sbin/fsck_ffs/fsck_ffs.8
+++ b/sbin/fsck_ffs/fsck_ffs.8
@@ -176,7 +176,7 @@ the super block for the file system.
An alternate super block is usually located at block 32 for UFS1,
and block 160 for UFS2.
.It Fl C
-Check if file system was dismouted cleanly.
+Check if file system was dismounted cleanly.
If so, skip file system checks (like "preen").
However, if the file system was not cleanly dismounted, do full checks,
is if
diff --git a/sbin/geom/class/part/gpart.8 b/sbin/geom/class/part/gpart.8
index a633bf9..6a62618 100644
--- a/sbin/geom/class/part/gpart.8
+++ b/sbin/geom/class/part/gpart.8
@@ -177,7 +177,7 @@ option. SI unit suffixes are allowed. One or both
.Fl b
and
.Fl s
-options can be ommitted. If so they are automatically calculated.
+options can be omitted. If so they are automatically calculated.
The type of the partition is given by the
.Fl t Ar type
option.
diff --git a/sbin/geom/core/geom.8 b/sbin/geom/core/geom.8
index 7950468..8c35aa3 100644
--- a/sbin/geom/core/geom.8
+++ b/sbin/geom/core/geom.8
@@ -57,7 +57,7 @@ The
utility is used to control various GEOM classes.
A class has to be aware of
.Xr geom 8
-comunication methods, but there are also some standard commands
+communication methods, but there are also some standard commands
which can be used for existing
.Xr geom 8
unaware classes.
diff --git a/sbin/ifconfig/ifconfig.8 b/sbin/ifconfig/ifconfig.8
index 614302f..e3a5a94 100644
--- a/sbin/ifconfig/ifconfig.8
+++ b/sbin/ifconfig/ifconfig.8
@@ -604,7 +604,7 @@ If the interface was reset when previously marked down,
the hardware will be re-initialized.
.El
.Pp
-The following parameters are for ICMPv6 Neightbor Discovery Protocol.
+The following parameters are for ICMPv6 Neighbor Discovery Protocol.
Note that the address family keyword
.Dq Li inet6
is needed for them:
@@ -645,7 +645,7 @@ Set a flag to enable Neighbor Unreachability Detection.
Clear a flag
.Cm nud .
.It Cm prefer_source
-Set a flag to prefer addesses on the interface as candidates of the
+Set a flag to prefer addresses on the interface as candidates of the
source address for outgoing packets.
.It Cm -prefer_source
Clear a flag
diff --git a/sbin/ping6/ping6.8 b/sbin/ping6/ping6.8
index 3298dea..fd6e63a 100644
--- a/sbin/ping6/ping6.8
+++ b/sbin/ping6/ping6.8
@@ -429,7 +429,7 @@ The
utility returns 0 on success (the host is alive),
2 if the transmission was successful but no responses were received,
any other non-zero value if the arguments are incorrect or
-another error has occured.
+another error has occurred.
.Sh EXAMPLES
Normally,
.Nm
diff --git a/sbin/sunlabel/sunlabel.8 b/sbin/sunlabel/sunlabel.8
index f577242..7e3d3f2 100644
--- a/sbin/sunlabel/sunlabel.8
+++ b/sbin/sunlabel/sunlabel.8
@@ -346,7 +346,7 @@ The following VTOC flags are known:
Optionally, both the tag and/or the flag name may be specified
numerically, using standard
.Ql C
-numerial notation (prefix
+numerical notation (prefix
.Ql 0x
for hexadecimal numbers,
.Ql 0
diff --git a/share/man/man4/cmx.4 b/share/man/man4/cmx.4
index b8db111..844e6c4 100644
--- a/share/man/man4/cmx.4
+++ b/share/man/man4/cmx.4
@@ -43,10 +43,10 @@ smartcard reader.
The driver provides a character device special file based
.Em Chip/Smart Card Interface Devices (CCID)
interface. The driver implements what the vendor calls the
-.Em Synchronious API
+.Em Synchronous API
onto the smartcard reader device.
.Pp
-Reading and writing is synchronious, meaning that a call to
+Reading and writing is synchronous, meaning that a call to
.Xr write 2
directly corresponds to a complete CCID command sent to the
device, while the following
diff --git a/share/man/man4/dc.4 b/share/man/man4/dc.4
index fa77a84..e24416c 100644
--- a/share/man/man4/dc.4
+++ b/share/man/man4/dc.4
@@ -315,7 +315,7 @@ possible transmit start threshold settings had been tried, so the
driver programmed the chip for store and forward mode.
In this mode,
the NIC will not begin transmission until the entire packet has been
-transfered into its FIFO memory.
+transferred into its FIFO memory.
.It "dc%d: chip is in D3 power state -- setting to D0"
This message applies only to adapters which support power
management.
@@ -434,7 +434,7 @@ can result in the receive filter being incorrectly programmed.
The
.Nm
driver will watch for this condition and requeue the setup frame until
-it is transfered successfully.
+it is transferred successfully.
.Pp
The ADMtek AL981 chip (and possibly the AN985 as well) has been observed
to sometimes wedge on transmit: this appears to happen when the driver
diff --git a/share/man/man4/gre.4 b/share/man/man4/gre.4
index 60bdbfb..f633e49 100644
--- a/share/man/man4/gre.4
+++ b/share/man/man4/gre.4
@@ -333,7 +333,7 @@ over the
interface itself.
.Pp
The current implementation uses the key only for outgoing packets.
-Incomming packets with a different key or without a key will be treated as if they
+Incoming packets with a different key or without a key will be treated as if they
would belong to this interface.
.Pp
RFC1701 is not fully supported, however all unsupported features have been
diff --git a/share/man/man4/meteor.4 b/share/man/man4/meteor.4
index 62ff6e9..f52d653 100644
--- a/share/man/man4/meteor.4
+++ b/share/man/man4/meteor.4
@@ -652,7 +652,7 @@ continuous capture.
The single frame capture
.Xr ioctl 2
request will return only after a
-frame has been captured and transfered to the frame buffer.
+frame has been captured and transferred to the frame buffer.
.Pp
The unsynchronized continuous capture will return immediately and
data is directly deposited into the buffer when it is available.
diff --git a/share/man/man4/net80211.4 b/share/man/man4/net80211.4
index bb6155d..6227b88 100644
--- a/share/man/man4/net80211.4
+++ b/share/man/man4/net80211.4
@@ -283,7 +283,7 @@ according to a least-congested criteria.
DFS support is mandatory for some 5Ghz frequencies in certain
locales (e.g. ETSI).
By default DFS is enabled according to the regulatory definitions
-and the curent country code, regdomain, and channel.
+and the current country code, regdomain, and channel.
.It Dv IEEE80211_IOC_DOTD
Return whether or not 802.11d support is enabled in
.Va i_val .
diff --git a/share/man/man4/ng_car.4 b/share/man/man4/ng_car.4
index 15efd10..a536fb7 100644
--- a/share/man/man4/ng_car.4
+++ b/share/man/man4/ng_car.4
@@ -30,7 +30,7 @@
.Os
.Sh NAME
.Nm ng_car
-.Nd Commited Access Rate netgraph node type
+.Nd Committed Access Rate netgraph node type
.Sh SYNOPSIS
.In netgraph/ng_car.h
.Sh DESCRIPTION
diff --git a/share/man/man4/pcii.4 b/share/man/man4/pcii.4
index d496113..3369d3f 100644
--- a/share/man/man4/pcii.4
+++ b/share/man/man4/pcii.4
@@ -46,7 +46,7 @@ driver provides support for driving an IEEE-488 bus, also called
IEC-625 (or just "IEC bus"), or HP-IB (Hewlett Packard Instrument
Bus), or GPIB (General Purpose Instrument Bus).
The driver supports National Instruments PCIIA cards (sometimes
-also refered to as PC2A) and compatibles.
+also referred to as PC2A) and compatibles.
These cards use a NEC \(mcPD7210 controller IC as the main
interface between the host computer and the instrument bus.
.Ss IO memory space layout
diff --git a/share/man/man4/pcm.4 b/share/man/man4/pcm.4
index 60d9948..1ea921d 100644
--- a/share/man/man4/pcm.4
+++ b/share/man/man4/pcm.4
@@ -167,7 +167,7 @@ There were no single standard, so much care has been taken to try
to satisfy each possible scenario, despite the fact that each
application has its own conflicting standard.
.Ss EQ
-The Parametric Software Equlizer (EQ) enables the use of
+The Parametric Software Equalizer (EQ) enables the use of
.Dq tone
controls (bass and treble).
Commonly used for ear-candy or frequency compensation due to the vast
@@ -237,7 +237,7 @@ are device specific.
.It Va hw.snd.compat_linux_mmap
Linux
.Xr mmap 2
-compatability.
+compatibility.
The following values are supported (default is 0):
.Bl -tag -width 2n
.It -1
diff --git a/share/man/man4/sctp.4 b/share/man/man4/sctp.4
index 975192c..45a2521 100644
--- a/share/man/man4/sctp.4
+++ b/share/man/man4/sctp.4
@@ -386,7 +386,7 @@ special flag
.Dv SCTP_EOR
passed in the sctp_sndrcvinfo flags field.
This effectively makes all sends part of the same message
-until the user specifices differently.
+until the user specifies differently.
This means that a caller must NOT change the stream number until
after the
.Dv SCTP_EOR
diff --git a/share/man/man9/BUS_NEW_PASS.9 b/share/man/man9/BUS_NEW_PASS.9
index 5b31c6d..4861ffd 100644
--- a/share/man/man9/BUS_NEW_PASS.9
+++ b/share/man/man9/BUS_NEW_PASS.9
@@ -45,7 +45,7 @@ method is called on each bus device to rescan the device tree when the pass
level has been changed.
This method is responsible for invoking
.Xr BUS_NEW_PASS 9
-on child bus devices to propogate the rescan to child devices.
+on child bus devices to propagate the rescan to child devices.
It is also responsible for reprobing any unattached child devices and
allowing drivers for the current pass to identify new children.
A default implementation is provided by
diff --git a/share/man/man9/ieee80211_vap.9 b/share/man/man9/ieee80211_vap.9
index c5a5c60..f5ef20b 100644
--- a/share/man/man9/ieee80211_vap.9
+++ b/share/man/man9/ieee80211_vap.9
@@ -117,7 +117,7 @@ to deactivate the vap and isolate it from activities such as requests
from user applications.
The driver can then reclaim resources held by the vap and re-enable
device operation.
-The exact procedure for quiesceing a device is unspecified but typically
+The exact procedure for quiescing a device is unspecified but typically
it involves blocking interrupts and stopping transmit and receive
processing.
.Sh MULTI-VAP OPERATION
diff --git a/share/man/man9/rman.9 b/share/man/man9/rman.9
index 43c3228..bea13a4 100644
--- a/share/man/man9/rman.9
+++ b/share/man/man9/rman.9
@@ -157,10 +157,10 @@ shall be set to a string that describes the resource to be managed.
It also initializes any mutexes associated with the structure.
If
.Fn rman_init
-fails to initalize the mutex, it will return
+fails to initialize the mutex, it will return
.Er ENOMEM ; otherwise it will return 0 and
.Fa rm
-will be initalized.
+will be initialized.
.Pp
The
.Fn rman_fini
diff --git a/usr.bin/du/du.1 b/usr.bin/du/du.1
index 8aacd81..1821975 100644
--- a/usr.bin/du/du.1
+++ b/usr.bin/du/du.1
@@ -72,7 +72,7 @@ This is different from the
.Fl k, m
options or setting
.Ev BLOCKSIZE
-and gives an estimate of how much space the examined file hierachy would
+and gives an estimate of how much space the examined file hierarchy would
require on a filesystem with the given
.Ar blocksize .
Unless in
diff --git a/usr.bin/fstat/fstat.1 b/usr.bin/fstat/fstat.1
index c2cd078..ba558bd 100644
--- a/usr.bin/fstat/fstat.1
+++ b/usr.bin/fstat/fstat.1
@@ -192,7 +192,7 @@ the name printed may not be the actual
name that the process originally used to open that file.
.El
.Sh SOCKETS
-The formating of open sockets depends on the protocol domain.
+The formatting of open sockets depends on the protocol domain.
In all cases the first field is the domain name, the second field
is the socket type (stream, dgram, etc), and the third is the socket
flags field (in hex).
diff --git a/usr.bin/rwall/rwall.1 b/usr.bin/rwall/rwall.1
index 2de83d4..043a490 100644
--- a/usr.bin/rwall/rwall.1
+++ b/usr.bin/rwall/rwall.1
@@ -66,7 +66,7 @@ daemon has terminated on the remote host.
.It rwall: RPC: Port mapper failure - RPC: Timed out
The remote host is not running the portmapper (see
.Xr rpcbind 8 ) ,
-and cannot accomodate any RPC-based services.
+and cannot accommodate any RPC-based services.
The host may be down.
.El
.Sh SEE ALSO
diff --git a/usr.sbin/bsnmpd/modules/snmp_bridge/snmp_bridge.3 b/usr.sbin/bsnmpd/modules/snmp_bridge/snmp_bridge.3
index 24c8969..78d63e13 100644
--- a/usr.sbin/bsnmpd/modules/snmp_bridge/snmp_bridge.3
+++ b/usr.sbin/bsnmpd/modules/snmp_bridge/snmp_bridge.3
@@ -66,7 +66,7 @@ index and set the status of the interface to "active/up".
will attempt to destroy the bridge interface.
.El
.It Va begemotBridgeBaseSpanEnabled
-A SNMP SET operation on this object is only successfull if the corresponding
+A SNMP SET operation on this object is only successful if the corresponding
port has not been added as member of the bridge interface on the system.
.It Va begemotBridgeBasePortStatus
SNMP SET operations with the following values are allowed:
diff --git a/usr.sbin/bsnmpd/modules/snmp_wlan/snmp_wlan.3 b/usr.sbin/bsnmpd/modules/snmp_wlan/snmp_wlan.3
index 6b9e503..828a64d 100644
--- a/usr.sbin/bsnmpd/modules/snmp_wlan/snmp_wlan.3
+++ b/usr.sbin/bsnmpd/modules/snmp_wlan/snmp_wlan.3
@@ -77,7 +77,7 @@ column should be executed.
The table contains information about the hardware capabilities of the parent of
a wireless interface.
.It Va wlanIfaceConfigTable
-The table is used to get or set various configuration paremeters for a virtual
+The table is used to get or set various configuration parameters for a virtual
wireless interface. Depending on the operating mode of the interface and the
hardware capabilities of the underlying hardware interface, not all parameters
and values may be supported.
@@ -104,7 +104,7 @@ WEP configuration for the wireless interfaces on the system.
Access Control configuration for wireless interfaces operating as access points.
.It Va wlanMACAccessControlMACTable
The table with Access Control MAC entries for which the configured Access
-Control POlicy on wireless interfaces operating in Host AP mode is applied.
+Control Policy on wireless interfaces operating in Host AP mode is applied.
.Va wlanMACAccessControlMACStatus
column is used to add or delete MAC ACL entries. A set with value createAndGo(4)
will add new entry, while with value destroy(6) will delete an existing one.
diff --git a/usr.sbin/lpr/lpr/printcap.5 b/usr.sbin/lpr/lpr/printcap.5
index 1ea6fea..4434429 100644
--- a/usr.sbin/lpr/lpr/printcap.5
+++ b/usr.sbin/lpr/lpr/printcap.5
@@ -367,7 +367,7 @@ is not in use), print data will be sent directly to the given
on the given
.Em machine .
.Sh TRANSFER STATISTICS
-When a print job is transfered to a remote machine (which might be
+When a print job is transferred to a remote machine (which might be
another unix box, or may be a network printer), it may be useful
to keep statistics on each transfer.
The
diff --git a/usr.sbin/makefs/makefs.8 b/usr.sbin/makefs/makefs.8
index 6c1615c..e0924d5 100644
--- a/usr.sbin/makefs/makefs.8
+++ b/usr.sbin/makefs/makefs.8
@@ -204,7 +204,7 @@ If
isn't provided, the current file flags will be used.
Missing regular file entries will be created as zero-length files.
.It Fl x
-Exclude file system nodes not explcitly listed in the specfile.
+Exclude file system nodes not explicitly listed in the specfile.
.It Fl N Ar dbdir
Use the user database text file
.Pa master.passwd
diff --git a/usr.sbin/mfiutil/mfiutil.8 b/usr.sbin/mfiutil/mfiutil.8
index 063fe03..ad48ab8 100644
--- a/usr.sbin/mfiutil/mfiutil.8
+++ b/usr.sbin/mfiutil/mfiutil.8
@@ -254,7 +254,7 @@ The default locale is
The available locales are
.Dq volume ,
.Dq drive ,
-.Dq enclousure ,
+.Dq enclosure ,
.Dq battery ,
.Dq sas ,
.Dq controller ,
diff --git a/usr.sbin/nfsd/stablerestart.5 b/usr.sbin/nfsd/stablerestart.5
index 79a8ab0..b32b985 100644
--- a/usr.sbin/nfsd/stablerestart.5
+++ b/usr.sbin/nfsd/stablerestart.5
@@ -58,7 +58,7 @@ end of the grace period.
The rest of the file are appended records, as defined by
struct nfst_rec in /usr/include/fs/nfs/nfsrvstate.h and are used
represent one of two things. There are records which indicate that a
-client successfully aquired state and records that indicate a client's state was revoked.
+client successfully acquired state and records that indicate a client's state was revoked.
State revoke records indicate that state information
for a client was discarded, due to lease expiry and an otherwise
conflicting open or lock request being made by a different client.
diff --git a/usr.sbin/nfsuserd/nfsuserd.8 b/usr.sbin/nfsuserd/nfsuserd.8
index b98c34a..04100ea 100644
--- a/usr.sbin/nfsuserd/nfsuserd.8
+++ b/usr.sbin/nfsuserd/nfsuserd.8
@@ -57,7 +57,7 @@ The following options are available:
.It Fl domain Ar domain_name
This option allows you to override the default DNS domain name, which
is acquired by taking either the suffix on the machine's hostname or,
-if that name is not a fully qualified host name, the cannonical name as
+if that name is not a fully qualified host name, the canonical name as
reported by
.Xr getaddrinfo 3 .
.It Fl usertimeout Ar minutes
diff --git a/usr.sbin/ntp/doc/ntp.conf.5 b/usr.sbin/ntp/doc/ntp.conf.5
index 264a250..a04f16e 100644
--- a/usr.sbin/ntp/doc/ntp.conf.5
+++ b/usr.sbin/ntp/doc/ntp.conf.5
@@ -317,7 +317,7 @@ the
option to a lower limit of 4 (16 s).
.It Cm noselect
Marks the server as unused, except for display purposes.
-The server is discarded by the selection algroithm.
+The server is discarded by the selection algorithm.
.It Cm prefer
Marks the server as preferred.
All other things being equal,
@@ -1405,9 +1405,9 @@ at abusive rates.
Some violations cause denied service
only for the offending packet, others cause denied service
for a timed period and others cause the denied service for
-an indefinate period.
+an indefinite period.
When a client or network is denied access
-for an indefinate period, the only way at present to remove
+for an indefinite period, the only way at present to remove
the restrictions is by restarting the server.
.Ss The Kiss-of-Death Packet
Ordinarily, packets denied service are simply dropped with no
diff --git a/usr.sbin/ntp/doc/ntpq.8 b/usr.sbin/ntp/doc/ntpq.8
index 60a5fb9..0a47c76 100644
--- a/usr.sbin/ntp/doc/ntpq.8
+++ b/usr.sbin/ntp/doc/ntpq.8
@@ -269,7 +269,7 @@ Exit
.It Ic raw
Causes all output from query commands is printed as received
from the remote server.
-The only formating/interpretation done on
+The only formatting/interpretation done on
the data is to transform nonascii data into a printable (but barely
understandable) form.
.It Ic timeout Ar milliseconds
OpenPOWER on IntegriCloud