diff options
| -rw-r--r-- | sys/pccard/pcic.c | 22 |
1 files changed, 22 insertions, 0 deletions
diff --git a/sys/pccard/pcic.c b/sys/pccard/pcic.c index f801e11..aaa683a 100644 --- a/sys/pccard/pcic.c +++ b/sys/pccard/pcic.c @@ -575,6 +575,28 @@ pcic_power(struct slot *slt) if ((c & PCIC_VS1STAT) == 0) slt->pwr.vcc = 33; } + if (sc->flags & PCIC_PD_POWER) { + /* + * Datasheets indicate that this is only supported on + * the CL-PD6710. However, my 6722 seems to support + * it as well. The datasheet for the '22 talks about + * the need to read this from register 0x6f.0xa (both + * slots are read from the same register). The + * datasheet is a little vauge. The '29 datasheet is + * clear and spells out the recommends way on the '22 + * is the way on the '29. Note: PCIC_MISC1_5V_DETECT + * is definitely not defined on the '29. + */ + c = sp->getb(sp, PCIC_MISC1); + if ((c & PCIC_MISC1_5V_DETECT) == 0) + slt->pwr.vcc = 33; + + /* + * Regardless of the above, setting the Auto Power Switch + * enable for the CL-PD 6722 seems to help too. + */ + reg |= PCIC_APSENA; + } /* * XXX Note: The Vpp controls varies quit a bit between bridge chips |
