diff options
| -rw-r--r-- | ObsoleteFiles.inc | 3 | ||||
| -rw-r--r-- | share/man/man4/Makefile | 2 | ||||
| -rw-r--r-- | share/man/man4/oldcard.4 | 244 |
3 files changed, 3 insertions, 246 deletions
diff --git a/ObsoleteFiles.inc b/ObsoleteFiles.inc index 11018d9..ada804c 100644 --- a/ObsoleteFiles.inc +++ b/ObsoleteFiles.inc @@ -14,6 +14,9 @@ # The file is partitioned: OLD_FILES first, then OLD_LIBS and OLD_DIRS last. # +# 20080126: oldcard.4 removal +OLD_FILES+=usr/share/man/man4/card.4.gz +OLD_FILES+=usr/share/man/man4/oldcard.4.gz # 20080122: Removed from the tree OLD_FILES+=usr/share/man/man9/BUF_REFCNT.9.gz # 20080108: Moved to section 2 diff --git a/share/man/man4/Makefile b/share/man/man4/Makefile index cd81b1f..31e23c0 100644 --- a/share/man/man4/Makefile +++ b/share/man/man4/Makefile @@ -253,7 +253,6 @@ MAN= aac.4 \ ${_nve.4} \ ${_nxge.4} \ ohci.4 \ - oldcard.4 \ orm.4 \ pass.4 \ patm.4 \ @@ -491,7 +490,6 @@ MLINKS+=${_nfe.4} ${_if_nfe.4} MLINKS+=nge.4 if_nge.4 MLINKS+=${_nve.4} ${_if_nve.4} MLINKS+=${_nxge.4} ${_if_nxge.4} -MLINKS+=oldcard.4 card.4 MLINKS+=patm.4 if_patm.4 MLINKS+=pccbb.4 cbb.4 MLINKS+=pcm.4 snd.4 \ diff --git a/share/man/man4/oldcard.4 b/share/man/man4/oldcard.4 deleted file mode 100644 index 4da469c..0000000 --- a/share/man/man4/oldcard.4 +++ /dev/null @@ -1,244 +0,0 @@ -.\" -.\" Copyright (c) 2001 M. Warner Losh -.\" All rights reserved. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. The name of the author may not be used to endorse or promote products -.\" derived from this software without specific prior written permission. -.\" -.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -.\" SUCH DAMAGE. -.\" -.\" $FreeBSD$ -.\" -.Dd August 25, 2001 -.Dt PCIC 4 -.Os -.Sh NAME -.Nm pcic -.Nd PC Card bridge driver -.Sh SYNOPSIS -.Cd device pcic -.Cd device card -.Sh DESCRIPTION -The -.Nm -driver controls the PC Card subsystem. -The -.Nm -driver supports most -.Tn ExCA -devices attached to either -.Tn ISA -or -.Tn PCI -bus. -The -.Nm -driver does not support the so-called TCIC controllers made by -Databook. -Nor does it support the MECIA chipset found in some early PC98 -NOTE PC machines. -The mecia driver now supports that bridge. -.Pp -The following -.Tn ISA -devices, or true clones, are supported in the current code. -.Pp -.Bl -tag -width "Intel i82365SL Step A" -compact -.It Intel i82365SL Step A -.It Intel i82365SL Step B -.It Intel i82365SL Step C -.Tn Intel Ns 's -original 16-bit PC Card controller. -.It Intel i82365SL-DF -.Tn Intel Ns 's -last version of this device. -3.3V support was added. -.It VLSI 82C146 -An older VLSI part with some issues on some machines. -.It Cirrus Logic PD-6710 -.It Cirrus Logic PD-6720 -.It Cirrus Logic PD-6722 -Cirrus Logic's pcic controller. -Compatible with the i82365SL Step C with the addition of a different -3.3V control. -.It Ricoh RF5C296 -.It Ricoh RF5C396 -Ricoh's PC Card bridge chips. -These are compatible with the i82365SL Step C, but with yet another -different 3.3V control. -.It Vadem 365 -.It Vadem 465 -Compatible with i82365SL Step C. -.It Vadem 468 -.It Vadem 469 -Like the earlier Vadem models, but with Vadem's own, incompatible, 3.3V -control system. -.It IBM PCIC -.Tn IBM -clone of the original i82365SL part, with its own ID register value. -Has no 3.3V ability. -.It IBM KING -A strange clone of i82365SL. -This part has many restrictions not found in the i82365SL, plus some -strange power control. -It has not been tested in ages, but is believed to work. -Its use is believed to be confined to model of ISA card, available -only in Japan. -.El -.Pp -Many other vendors made parts in this arena, but most of them were -compatible with one of the above chipsets. -.Pp -The following PCI cardbus and pcmcia bridges are supported: -.Pp -.Bl -tag -width "Intel i82365SL Step A" -compact -.It Cirrus Logic PD6729 -.It Cirrus Logic PD6730 -These chips require special configuration when they are on an add-in -PCI card. -.It Cirrus Logic PD6832 -.It Cirrus Logic PD6833 -.Pp -.It O2micro OZ6729 -.It O2micro OZ6730 -.It O2micro OZ6812 -.It O2micro OZ6832 -.It O2micro OZ6833 -.It O2micro OZ6836 -.It O2micro OZ6860 -.It O2micro OZ6872 -O2 Micro chips may be poorly supported because the author does not -have good access to machines with one of these bridges in it. -.Pp -.It Ricoh RL4C475 -.It Ricoh RL4C476 -.It Ricoh RL4C477 -.It Ricoh RL4C478 -.Pp -.It TI PCI-1031 -.It TI PCI-1130 -.It TI PCI-1131 -.It TI PCI-1211 -.It TI PCI-1220 -.It TI PCI-1221 -.It TI PCI-1225 -.It TI PCI-1250 -.It TI PCI-1251 -.It TI PCI-1251B -.It TI PCI-1410 -.It TI PCI-1420 -.It TI PCI-1450 -.It TI PCI-1451 -.It TI PCI-4451 -.Pp -.It Toshiba ToPIC95 -.It Toshiba ToPIC97 -.It Toshiba ToPIC100 -.El -.Sh FILES -.Bl -tag -width ".Pa /dev/card0" -compact -.It Pa /dev/card0 -Character device for the -.Nm -driver. -.El -.Sh MODES OF OPERATION -The ISA device supports routing ISA interrupts only. -You cannot share ISA interrupts. -Every interrupt must be unique. -.Pp -The PCI device supports routing ISA or PCI interrupts. -PCI interrupts are sharable. -ISA interrupts are not sharable. -PCI interrupts should be used unless your machine has a specific problem using -them. -.Pp -PCI interrupt routing is the default for PCI devices. -Some older laptops require ISA interrupt routing to work properly. -To enable ISA interrupt routing, you must set the tunable -.Li hw.pcic.intr_path=1 -in -.Pa /boot/loader.conf . -For the present, unless you have a one slot machine, you should set -.Li hw.pcic.irq=0 -to force polling mode. -Two slot machines have minor issues with using an ISA interrupt for the -CSC interrupt. -.Sh LOADER TUNABLES -.Bl -tag -width indent -.It Va hw.pcic.ignore_function_1 -Needed for some, improperly manufactured PCI cards made by Orinoco. -It disables function 1 completely. -Set to 0 to enable function 1. -Set to 1 to disable function 1. -This tunable generally should not be needed on laptops. -The default is 0. -.It Va hw.pcic.init_routing -Some machines can tolerate interrupt routing selection at the cardbus -bridge level. -Others fail when you mess with these registers. -Set to 1 to force the chipset to route via parallel PCI interrupts (as -well as a few other little things). -Setting to 0, the default, forces the code to leave these registers as the -code finds them. -Most laptops will not need to set this tunable. -Many PCI cards with cardbus chips on them are believed to need this -tunable set to 1. -The default is 0. -.It Va hw.pcic.intr_path -Should PCI pcic devices route interrupts via ISA or PCI. -A value of 1 means route via ISA. -A value of 2 means route via PCI. -This is ignored for the ISA device. -Many older laptops do not have PCI BIOS implementations that -.Fx -can use to route interrupts properly. -These laptops may need to set this to 1 and -.Va hw.pcic.irq -to a value -(or 0 for polling). -The default is 2. -.It Va hw.pcic.irq -Overrides the IRQ to use for ISA interrupt routing of the CSC or -management interrupt. -If you are using the ISA device, you can set this tunable, or use the -.Cd "irq N" -clause in config file. -If you are using a PCI device in ISA interrupt mode (see -.Va hw.pcic.intr_path ) , -then you must set the interrupt with this -sysctl, or polling mode will be used. -Due to limitations in the tunable system, only one interrupt can be selected -for all cards. -Systems with multiple PCI bridges that need to use ISA routing are encouraged -to use polling mode on each of the cards. -The default is 0. -.It Va hw.pcic.ignore_pci -Defaults to 0. -Set to 1 to completely ignore the cardbus bridge. -This may help some old laptops work. -Setting to 1 on newer laptops will almost certainly fail. -.El -.Sh HISTORY -Too long to detail in the man page. -.Sh BUGS -Too many to list. -Some are the fault of the standard. -Some are the fault of bad standard compliance. -Some are Warner's fault. -These drivers are known as OLDCARD in other parts of the documentation. |
