summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--bin/ln/symlink.72
-rw-r--r--gnu/lib/libdialog/dialog.318
-rw-r--r--gnu/usr.bin/man/apropos/apropos.man6
-rw-r--r--gnu/usr.bin/man/man/man.man4
-rw-r--r--gnu/usr.bin/tar/tar.110
-rw-r--r--lib/libc/gen/time.32
-rw-r--r--lib/libc/i386/sys/i386_get_ldt.220
-rw-r--r--lib/libc/locale/gb2312.52
-rw-r--r--lib/libc/locale/mblen.32
-rw-r--r--lib/libc/sys/connect.22
-rw-r--r--lib/libc/sys/ntp_gettime.22
-rw-r--r--lib/libkiconv/kiconv.32
-rw-r--r--lib/libsdp/sdp.32
-rw-r--r--lib/libufs/libufs.32
-rw-r--r--libexec/atrun/atrun.man8
-rw-r--r--share/examples/ses/getencstat/getencstat.06
-rw-r--r--share/examples/ses/sesd/sesd.010
-rw-r--r--share/examples/ses/setencstat/setencstat.06
-rw-r--r--share/examples/ses/setobjstat/setobjstat.06
-rw-r--r--share/man/man3/pthread_switch_add_np.32
-rw-r--r--share/man/man4/cd.44
-rw-r--r--share/man/man4/da.42
-rw-r--r--share/man/man4/man4.i386/acpi_asus.44
-rw-r--r--share/man/man4/man4.i386/ct.440
-rw-r--r--share/man/man4/man4.i386/ndis.42
-rw-r--r--share/man/man4/matcd.434
-rw-r--r--share/man/man4/multicast.48
-rw-r--r--share/man/man4/ng_atmpif.42
-rw-r--r--share/man/man4/ng_sppp.42
-rw-r--r--share/man/man4/ng_sscop.412
-rw-r--r--share/man/man4/stg.42
-rw-r--r--share/man/man7/development.72
-rw-r--r--share/man/man9/taskqueue.92
-rw-r--r--share/man/man9/watchdog.92
-rw-r--r--usr.bin/makewhatis/makewhatis.local.88
-rw-r--r--usr.bin/sed/sed.12
-rw-r--r--usr.bin/systat/systat.12
-rw-r--r--usr.sbin/acpi/acpidump/acpidump.84
-rw-r--r--usr.sbin/mixer/mixer.82
39 files changed, 125 insertions, 125 deletions
diff --git a/bin/ln/symlink.7 b/bin/ln/symlink.7
index 75ab331..eb2cffb 100644
--- a/bin/ln/symlink.7
+++ b/bin/ln/symlink.7
@@ -134,7 +134,7 @@ an existing symbolic link can be changed by means of the
.Xr lchflags 2 ,
.Xr lchmod 2 ,
.Xr lchown 2 ,
-and
+and
.Xr lutimes 2
system calls, respectively.
Of these, only the flags are used by the system;
diff --git a/gnu/lib/libdialog/dialog.3 b/gnu/lib/libdialog/dialog.3
index c0cc028..9fa0b97 100644
--- a/gnu/lib/libdialog/dialog.3
+++ b/gnu/lib/libdialog/dialog.3
@@ -127,15 +127,15 @@
.Fn end_dialog "void"
.Ft "int"
.Fn dialog_ftree "unsigned char *filename" "unsigned char FS" "unsigned char *title" "unsigned char *prompt" "int height" "int width" "int menu_height" "unsigned char **result"
-.Ft "int"
-.Fo dialog_tree
-.Fa "unsigned char **names"
+.Ft "int"
+.Fo dialog_tree
+.Fa "unsigned char **names"
.Fa "int size"
-.Fa "unsigned char FS"
-.Fa "unsigned char *title"
+.Fa "unsigned char FS"
+.Fa "unsigned char *title"
.Fa "unsigned char *prompt"
-.Fa "int height"
-.Fa "int width"
+.Fa "int height"
+.Fa "int width"
.Fa "int menu_height"
.Fa "unsigned char **result"
.Fc
@@ -711,7 +711,7 @@ box will be calculated automatically.
.Va menu_height
sets the height of the tree subwindow inside the
.Fn dialog_ftree
-box and must be set.
+box and must be set.
.Va title
is shown centered on the upper border of the
.Fn dialog_ftree
@@ -758,7 +758,7 @@ function returns 1. In case of exiting
on ESC, the function returns -1.
.Pp
The
-.Fn dialog_tree
+.Fn dialog_tree
function returns the same results as
.Fn dialog_ftree .
If 0 is returned, result will contain a pointer from the array
diff --git a/gnu/usr.bin/man/apropos/apropos.man b/gnu/usr.bin/man/apropos/apropos.man
index a97253d..8d9fd50 100644
--- a/gnu/usr.bin/man/apropos/apropos.man
+++ b/gnu/usr.bin/man/apropos/apropos.man
@@ -4,7 +4,7 @@
.\"
.\" You may distribute under the terms of the GNU General Public
.\" License as specified in the README file that comes with the man 1.0
-.\" distribution.
+.\" distribution.
.\"
.\" John W. Eaton
.\" jwe@che.utexas.edu
@@ -31,14 +31,14 @@ searches a set of database files containing short descriptions
of system commands for keywords and displays the result on the
standard output.
.Nm whatis
-displays only complete word matches.
+displays only complete word matches.
.Pp
.Ar keyword
really is an extended regular expression, please read
.Xr grep 1
manual page for more information about its format.
.Sh DIAGNOSTICS
-The
+The
.Nm
utility exits 0 on success, and 1 if no keyword matched.
.Sh SEE ALSO
diff --git a/gnu/usr.bin/man/man/man.man b/gnu/usr.bin/man/man/man.man
index 7d64b4c..7b8a2a3 100644
--- a/gnu/usr.bin/man/man/man.man
+++ b/gnu/usr.bin/man/man/man.man
@@ -4,7 +4,7 @@
.\"
.\" You may distribute under the terms of the GNU General Public
.\" License as specified in the README file that comes with the man 1.0
-.\" distribution.
+.\" distribution.
.\"
.\" John W. Eaton
.\" jwe@che.utexas.edu
@@ -171,7 +171,7 @@ directory.
.It Fl p Ar string
Specify the sequence of preprocessors to run before nroff or troff.
Not all installations will have a full set of preprocessors.
-Some of the preprocessors and the letters used to designate them are:
+Some of the preprocessors and the letters used to designate them are:
eqn (e), grap (g), pic (p), tbl (t), vgrind (v), refer (r).
This option overrides the
.Ev MANROFFSEQ
diff --git a/gnu/usr.bin/tar/tar.1 b/gnu/usr.bin/tar/tar.1
index 757dbc3..07fadc4 100644
--- a/gnu/usr.bin/tar/tar.1
+++ b/gnu/usr.bin/tar/tar.1
@@ -20,7 +20,7 @@
.Ar ...
.Sh DESCRIPTION
.Nm Tar
-is short for
+is short for
.Dq tape archiver ,
so named for historical reasons; the
.Nm
@@ -232,7 +232,7 @@ Stay in local file system when creating an archive (do not cross mount
points).
.It Fl L Ar number
.It Fl -tape-length Ar number
-Change tapes after writing
+Change tapes after writing
.Ar number
* 1024 bytes.
.It Fl m
@@ -447,7 +447,7 @@ Other possible time specifications are
.Sq "02/09/97 13:15" ,
.Sq "1997-02-09 13:15" ,
.Sq "13:15 9 Feb 1997" ,
-.Sq "9 Feb 1997 13:15" ,
+.Sq "9 Feb 1997 13:15" ,
.Sq "Feb. 9, 1997 1:15pm" ,
.Sq "09-Feb" ,
.Sq "3 weeks ago"
@@ -558,8 +558,8 @@ feature does not work like historical
.Nm
programs, and is probably untrustworthy.
.Pp
-The
-.Fl A
+The
+.Fl A
command should work to join an arbitrary number of
.Nm
archives
diff --git a/lib/libc/gen/time.3 b/lib/libc/gen/time.3
index 22ef9b4..9494ec7 100644
--- a/lib/libc/gen/time.3
+++ b/lib/libc/gen/time.3
@@ -59,7 +59,7 @@ If an error occurs,
returns the value
.Po Vt time_t Pc Ns \-1 .
.Pp
-The return value is also stored in
+The return value is also stored in
.No \&* Ns Va tloc ,
provided that
.Va tloc
diff --git a/lib/libc/i386/sys/i386_get_ldt.2 b/lib/libc/i386/sys/i386_get_ldt.2
index 67ae712..135d8b8 100644
--- a/lib/libc/i386/sys/i386_get_ldt.2
+++ b/lib/libc/i386/sys/i386_get_ldt.2
@@ -74,32 +74,32 @@ can be either segment_descriptor or gate_descriptor and are defined in
These structures are defined by the architecture
as disjoint bit-fields, so care must be taken in constructing them.
.Pp
-If
+If
.Fa start_sel
-is
+is
.Em LDT_AUTO_ALLOC ,
.Fa num_sels
-is 1 and the descriptor pointed to by
+is 1 and the descriptor pointed to by
.Fa descs
is legal, then
.Fn i386_set_ldt
-will allocate a descriptor and return its
+will allocate a descriptor and return its
selector number.
.Pp
-If
+If
.Fa num_descs
is 1,
.Fa start_sels
-is valid, and
+is valid, and
.Fa descs
-is NULL, then
+is NULL, then
.Fn i386_set_ldt
will free that descriptor
(making it available to be reallocated again later).
.Pp
-If
-.Fa num_descs
-is 0,
+If
+.Fa num_descs
+is 0,
.Fa start_sels
is 0 and
.Fa descs
diff --git a/lib/libc/locale/gb2312.5 b/lib/libc/locale/gb2312.5
index a113a3b..754fcb4 100644
--- a/lib/libc/locale/gb2312.5
+++ b/lib/libc/locale/gb2312.5
@@ -36,7 +36,7 @@
The
.Nm GB2312
encoding implements GB\ 2312-1980, a PRC national standard
-for the encoding of simplified Chinese characters.
+for the encoding of simplified Chinese characters.
.Pp
Multibyte characters in the GB2312
encoding can be one byte or two bytes long.
diff --git a/lib/libc/locale/mblen.3 b/lib/libc/locale/mblen.3
index 6e3a2f2..514a485 100644
--- a/lib/libc/locale/mblen.3
+++ b/lib/libc/locale/mblen.3
@@ -90,7 +90,7 @@ In this case,
.Fn mblen Ns No 's
internal conversion state is undefined.
.Sh ERRORS
-The
+The
.Fn mblen
function will fail if:
.Bl -tag -width Er
diff --git a/lib/libc/sys/connect.2 b/lib/libc/sys/connect.2
index 7b135ea..5b74fbe 100644
--- a/lib/libc/sys/connect.2
+++ b/lib/libc/sys/connect.2
@@ -126,7 +126,7 @@ as in the case of
A previous connection attempt has not yet been completed.
.It Bq Er EACCES
An attempt is made to connect to a broadcast address (obtained through the
-.Dv INADDR_BROADCAST
+.Dv INADDR_BROADCAST
constant or the
.Dv INADDR_NONE
return value) through a socket that does not provide broadcast functionality.
diff --git a/lib/libc/sys/ntp_gettime.2 b/lib/libc/sys/ntp_gettime.2
index b74c3d9..f556d74 100644
--- a/lib/libc/sys/ntp_gettime.2
+++ b/lib/libc/sys/ntp_gettime.2
@@ -75,7 +75,7 @@ Offset in seconds between the TAI and UTC time scales.
This offset is published twice a year and is an integral number of
seconds between TAI (which does not have leap seconds) and UTC (which
does).
-.Xr ntpd 8
+.Xr ntpd 8
or some other agent maintains this value.
A value of 0 means unknown.
As of the date of the manual page, the offset is 32 seconds.
diff --git a/lib/libkiconv/kiconv.3 b/lib/libkiconv/kiconv.3
index 632252e..3f1c7cb 100644
--- a/lib/libkiconv/kiconv.3
+++ b/lib/libkiconv/kiconv.3
@@ -97,7 +97,7 @@ or toupper
.El
.Pp
A tolower/toupper conversion is limited to single-byte characters.
-.Pp
+.Pp
.Fn kiconv_add_xlat16_cspairs
defines two conversion tables which are from
.Ar localcode
diff --git a/lib/libsdp/sdp.3 b/lib/libsdp/sdp.3
index e19854b..24b0779 100644
--- a/lib/libsdp/sdp.3
+++ b/lib/libsdp/sdp.3
@@ -253,7 +253,7 @@ buffer.
Note: attributes are returned in the order they appear in the Service Search
Attribute Response.
SDP server could return several attributes for the same record.
-In this case the order of the attributes will be: all attributes for the first
+In this case the order of the attributes will be: all attributes for the first
records, then all attributes for the secord record etc.
.Pp
The
diff --git a/lib/libufs/libufs.3 b/lib/libufs/libufs.3
index 1de5dfe..4fd0ce5 100644
--- a/lib/libufs/libufs.3
+++ b/lib/libufs/libufs.3
@@ -45,7 +45,7 @@ The structure is filled out, operations are performed, and the disk
is closed.
.Sh ERRORS
Functions provided by
-.Nm
+.Nm
return -1 in every functional error situation.
They also set the
.Fa d_error
diff --git a/libexec/atrun/atrun.man b/libexec/atrun/atrun.man
index 70c1230..a8ce57c 100644
--- a/libexec/atrun/atrun.man
+++ b/libexec/atrun/atrun.man
@@ -27,12 +27,12 @@ so that
.Nm
gets invoked every five minutes.
.Pp
-At every invocation,
+At every invocation,
.Nm
will start all the jobs in the lowercase queues whose start
time has elapsed.
-In addition, if the load average over the last minute was less than
-the specified limit then a maximum of one batch job (denoted by the
+In addition, if the load average over the last minute was less than
+the specified limit then a maximum of one batch job (denoted by the
uppercase queues) is started.
.Sh OPTIONS
.Bl -tag -width indent
@@ -63,7 +63,7 @@ Directory containing job files
.Xr crontab 5 ,
.Xr cron 8
.Sh BUGS
-The functionality of
+The functionality of
.Nm
should be merged into
.Xr cron 8 .
diff --git a/share/examples/ses/getencstat/getencstat.0 b/share/examples/ses/getencstat/getencstat.0
index c62de51..c9549d4 100644
--- a/share/examples/ses/getencstat/getencstat.0
+++ b/share/examples/ses/getencstat/getencstat.0
@@ -3,14 +3,14 @@
.\" Copyright (c) 2000 Matthew Jacob
.\" All rights reserved.
.\"
-.\" Redistribution and use in source and binary forms, with or without
+.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions, and the following disclaimer,
.\" without modification, immediately at the beginning of the file.
.\" 2. The name of the author may not be used to endorse or promote products
-.\" derived from this software without specific prior written permission.
+.\" derived from this software without specific prior written permission.
.\"
.\" Alternatively, this software may be distributed under the terms of the
.\" the GNU Public License ("GPL").
@@ -22,7 +22,7 @@
.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
diff --git a/share/examples/ses/sesd/sesd.0 b/share/examples/ses/sesd/sesd.0
index dfb6b1c..e517e38 100644
--- a/share/examples/ses/sesd/sesd.0
+++ b/share/examples/ses/sesd/sesd.0
@@ -3,14 +3,14 @@
.\" Copyright (c) 2000 Matthew Jacob
.\" All rights reserved.
.\"
-.\" Redistribution and use in source and binary forms, with or without
+.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions, and the following disclaimer,
.\" without modification, immediately at the beginning of the file.
.\" 2. The name of the author may not be used to endorse or promote products
-.\" derived from this software without specific prior written permission.
+.\" derived from this software without specific prior written permission.
.\"
.\" Alternatively, this software may be distributed under the terms of the
.\" the GNU Public License ("GPL").
@@ -22,7 +22,7 @@
.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
@@ -49,7 +49,7 @@ in state and logs such changes to the system error logger
(see
.Xr syslogd 8 ) .
At least one device must be specified.
-When no other options are supplied,
+When no other options are supplied,
.Nm
detached becomes a daemon, by default waking up every 30 seconds to
poll each device for a change in state.
@@ -76,7 +76,7 @@ SCSI Environmental Services Devices
.El
.Sh SEE ALSO
.Xr ses 4 ,
-.Xr getencstat 8 ,
+.Xr getencstat 8 ,
.Xr setencstat 8 ,
.Xr setobjstat 8 ,
.Xr syslogd 8
diff --git a/share/examples/ses/setencstat/setencstat.0 b/share/examples/ses/setencstat/setencstat.0
index 6047185..a2a46ee 100644
--- a/share/examples/ses/setencstat/setencstat.0
+++ b/share/examples/ses/setencstat/setencstat.0
@@ -3,14 +3,14 @@
.\" Copyright (c) 2000 Matthew Jacob
.\" All rights reserved.
.\"
-.\" Redistribution and use in source and binary forms, with or without
+.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions, and the following disclaimer,
.\" without modification, immediately at the beginning of the file.
.\" 2. The name of the author may not be used to endorse or promote products
-.\" derived from this software without specific prior written permission.
+.\" derived from this software without specific prior written permission.
.\"
.\" Alternatively, this software may be distributed under the terms of the
.\" the GNU Public License ("GPL").
@@ -22,7 +22,7 @@
.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
diff --git a/share/examples/ses/setobjstat/setobjstat.0 b/share/examples/ses/setobjstat/setobjstat.0
index 8b298f5..a57174f 100644
--- a/share/examples/ses/setobjstat/setobjstat.0
+++ b/share/examples/ses/setobjstat/setobjstat.0
@@ -3,14 +3,14 @@
.\" Copyright (c) 2000 Matthew Jacob
.\" All rights reserved.
.\"
-.\" Redistribution and use in source and binary forms, with or without
+.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions, and the following disclaimer,
.\" without modification, immediately at the beginning of the file.
.\" 2. The name of the author may not be used to endorse or promote products
-.\" derived from this software without specific prior written permission.
+.\" derived from this software without specific prior written permission.
.\"
.\" Alternatively, this software may be distributed under the terms of the
.\" the GNU Public License ("GPL").
@@ -22,7 +22,7 @@
.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
diff --git a/share/man/man3/pthread_switch_add_np.3 b/share/man/man3/pthread_switch_add_np.3
index 9e7618c..6a120d7 100644
--- a/share/man/man3/pthread_switch_add_np.3
+++ b/share/man/man3/pthread_switch_add_np.3
@@ -55,7 +55,7 @@ and
functions respectively.
.Sh RETURN VALUES
If successful,
-these functions return 0.
+these functions return 0.
Otherwise, an error number is returned to indicate the error.
.Sh ERRORS
The
diff --git a/share/man/man4/cd.4 b/share/man/man4/cd.4
index 87f78ab..4bb9b0d 100644
--- a/share/man/man4/cd.4
+++ b/share/man/man4/cd.4
@@ -388,7 +388,7 @@ After that, the
.Nm
driver defaults to using 6 byte commands (assuming the protocol the drive
speaks claims to support 6 byte commands), until one fails with a
-.Tn SCSI
+.Tn SCSI
ILLEGAL REQUEST error. Then it tries the 10 byte version of the command to
see if that works instead. Users can change the default via per-drive
sysctl variables and loader tunables. The variable names are the same in
@@ -396,7 +396,7 @@ both instances:
.Pp
.Va kern.cam.cd.%d.minimum_cmd_size
.Pp
-Where
+Where
.Dq %d
is the unit number of the drive in question. Valid minimum command sizes
are 6 and 10. Any value above 6 will be rounded to 10, and any value below
diff --git a/share/man/man4/da.4 b/share/man/man4/da.4
index b768589..0900852 100644
--- a/share/man/man4/da.4
+++ b/share/man/man4/da.4
@@ -119,7 +119,7 @@ Power Supply (UPS).
The
.Nm
device driver ensures that the cache and media are synchronized upon
-final close of the device or an unexpected shutdown (panic) event.
+final close of the device or an unexpected shutdown (panic) event.
This ensures that it is safe to disconnect power once the operating system
has reported that it has halted.
The write cache can be enabled by setting the
diff --git a/share/man/man4/man4.i386/acpi_asus.4 b/share/man/man4/man4.i386/acpi_asus.4
index 7a96948..2d5314d 100644
--- a/share/man/man4/man4.i386/acpi_asus.4
+++ b/share/man/man4/man4.i386/acpi_asus.4
@@ -108,7 +108,7 @@ The
driver and this manual page were written by
.An Philip Paeps Aq philip@FreeBSD.org .
.Pp
-Inspiration came from the
-.Em acpi4asus project
+Inspiration came from the
+.Em acpi4asus project
started by Julien Lerouge which maintains a driver implementing this
functionality in the Linux kernel.
diff --git a/share/man/man4/man4.i386/ct.4 b/share/man/man4/man4.i386/ct.4
index 3fdd1b1..85ee11b 100644
--- a/share/man/man4/man4.i386/ct.4
+++ b/share/man/man4/man4.i386/ct.4
@@ -41,7 +41,7 @@ For most PC-9801-55, -92 and compatibles:
.Cd hint.ct.0.at="isa"
.Pp
For ELECOM bus-master
-.Tn SCSI
+.Tn SCSI
adapters:
.Cd hint.ct.0.at="isa"
.Cd hint.ct.0.flags="0x30000"
@@ -67,50 +67,50 @@ For adapters with SMIT transfer mode to enable SMIT transfer:
meaning:
.Bl -tag -offset indent -compact -width 0x000000
.It 0x00000
-DMA transfer mode for an NEC PC-9801-55, -92 (or
-compatibles), ICM IF-2660, Midori-Denshi MDC-554NA, or
+DMA transfer mode for an NEC PC-9801-55, -92 (or
+compatibles), ICM IF-2660, Midori-Denshi MDC-554NA, or
Logitec LHA-N151
.It 0x10000
DMA transfer mode for an I-O DATA SC-98II
.It 0x20000
-bus-master transfer mode for a TEXA HA-55BS2, its
+bus-master transfer mode for a TEXA HA-55BS2, its
successors, or Midori-Denshi MDC-926R
.It 0x30000
-bus-master transfer mode for an ELECOM bus-master SCSI
+bus-master transfer mode for an ELECOM bus-master SCSI
adapter
.It 0x40000
SMIT transfer mode (for supported adapters only)
.It 0x50000
-bus-master transfer mode for a Logitec LHA-20x series,
+bus-master transfer mode for a Logitec LHA-20x series,
ICM IF-2766, IF-2766ET, IF-2767 or IF-2769
.Sh DESCRIPTION
The
.Nm
-driver provides access to the
-.Tn SCSI
+driver provides access to the
+.Tn SCSI
bus connected to a WD33C93[ABC] based host adapter.
The following adapters are supported:
.Pp
.Bl -bullet -compact
.It
-NEC PC-9801-55, 92 and compatibles,
+NEC PC-9801-55, 92 and compatibles,
.It
-ELECOM bus-master
-.Tn SCSI
-adapters,
+ELECOM bus-master
+.Tn SCSI
+adapters,
.It
-I-O DATA SC-98II,
+I-O DATA SC-98II,
.It
-ICM IF-2660, IF-2766, IF-2766ET, IF-2767 and IF-2769,
+ICM IF-2660, IF-2766, IF-2766ET, IF-2767 and IF-2769,
.It
-Logitec LHA-N151 and LHA-20x series,
+Logitec LHA-N151 and LHA-20x series,
.It
-Midori-Denshi MDC-554NA and MDC-926R,
+Midori-Denshi MDC-554NA and MDC-926R,
.It
-TEXA HA-55BS2 and its later models, and
+TEXA HA-55BS2 and its later models, and
.It
-SMIT transfer type
-.Tn SCSI
+SMIT transfer type
+.Tn SCSI
host adapters.
.El
.Sh SEE ALSO
@@ -143,6 +143,6 @@ driver was written by
.Pp
This manual page was written by
.An -nosplit
-.An Noriaki MITSUNAGA Aq non@FreeBSD.org
+.An Noriaki MITSUNAGA Aq non@FreeBSD.org
and
.An Hideyuki KURASHINA Aq rushani@FreeBSD.org .
diff --git a/share/man/man4/man4.i386/ndis.4 b/share/man/man4/man4.i386/ndis.4
index 5a397bc..76b9c21 100644
--- a/share/man/man4/man4.i386/ndis.4
+++ b/share/man/man4/man4.i386/ndis.4
@@ -70,7 +70,7 @@ the user must extract two files: the .SYS file containing the driver
binary code, and its companion .INF file, which contains the
definitions for driver-specific registry keys and other installation
data such as device identifiers. These two files can be converted
-into a
+into a
.Pa ndis_driver_data.h
file using the
.Xr ndiscvt 8
diff --git a/share/man/man4/matcd.4 b/share/man/man4/matcd.4
index 5235759..1cbab48 100644
--- a/share/man/man4/matcd.4
+++ b/share/man/man4/matcd.4
@@ -69,13 +69,13 @@ driver controls the CR-562 and CR-563 Compact Disc drives made by
Matsushita-Kotobuki Electronics Industries, or Matsushita for short.
These drives were sold under the Panasonic (which is a trade
name for Matsushita), Creative Labs (omniCD) and Reveal names, and were
-also included in computers that were made by Tandy, GRiD, Victor, AST,
+also included in computers that were made by Tandy, GRiD, Victor, AST,
Packard Bell and many other brands.
.Pp
The drives are compatible with the major the Compact Disc standards,
including CD-DA (Red Book - Digital Audio on pressed media), CD-WO (Orange
Book Part II - Write-Once media), CD-ROM (Yellow Book - Data Storage), and
-the Kodak Photo-CD system. The drives have some support related to
+the Kodak Photo-CD system. The drives have some support related to
CD-ROM XA and CD-I (Green Book) audio and data requirements.
.Pp
These drives connect to the PC ISA bus through a simple (but proprietary) host
@@ -99,8 +99,8 @@ The
.Nm
driver can be directly linked into the
.Fx
-kernel, or exist
-as a loadable
+kernel, or exist
+as a loadable
.Fx
kernel module. The kernel module can be loaded or unloaded at any time
using the \fBkldload\fR(8)/\fBkldunload\fR(8) commands.
@@ -116,7 +116,7 @@ the driver already in the kernel can simplify the installation process.
if you determine that you need to have the
.Nm
driver linked into the kernel, it is necessary to add an entry to the kernel
-configuration file and generate a new kernel. The
+configuration file and generate a new kernel. The
.Fx
kernel source tree comes
with the file \fI/usr/src/sys/i386/conf/GENERIC\fR.
@@ -140,9 +140,9 @@ all of the instructions that are displayed. If the kernel completely
builds, use the "make install" command and then reboot the system for that
new kernel to become operational.
.Sh DRIVER CONFIGURATION
-Regardless of whether the
+Regardless of whether the
.Nm
-driver is linked into the kernel or is used as a loadable kernel module,
+driver is linked into the kernel or is used as a loadable kernel module,
the number of host interfaces that the driver will expect (or search for)
is dictated by the number of entries present in the file
\fI/boot/device\.hints\fR. For example, in order to support two host
@@ -156,7 +156,7 @@ hint.matcd.1.port="0x260"
.Ed
Each set of entries designates a different
-.Nm
+.Nm
host interface, and where the I/O ports on that host interface adapter
are located.
.Pp
@@ -170,13 +170,13 @@ interface.
.Pp
If the \fIaddress\fR parameter of a
\fBhint.matcd.\fIn\fR.port="\fIaddress\fP"\fR entry
-in \fI/boot/device\.hints\fR file is set to "\fB-1\fR", the
+in \fI/boot/device\.hints\fR file is set to "\fB-1\fR", the
.Nm
driver searches for the host interface adapters by using a table
of known I/O ports on Creative host adapters contained in the driver itself
-(see \fI/usr/src/sys/dev/matcd/options.h\fR).
+(see \fI/usr/src/sys/dev/matcd/options.h\fR).
.Pp
-Although the multiple port scan allows the
+Although the multiple port scan allows the
.Nm
driver to work with many different types of host adapters without adjustments,
using this mechanism has the potential to cause problems when your system has
@@ -202,7 +202,7 @@ above where the first I/O port for the audio section of the card (0x220).
If you have determined exactly where the Matsushita I/O ports start on your
system, specify the port by setting the
\fBhint.matcd.\fIn\fR.port="\fIaddress\fP"\fR entry at the kernel boot
-prompt, or by editing the entry in the \fI/boot/device\.hints\fR file.
+prompt, or by editing the entry in the \fI/boot/device\.hints\fR file.
.Pp
If you make a change to the \fI/boot/device\.hints\fR configuration file
while the system is running, it is currently necessary to reboot the system
@@ -236,7 +236,7 @@ Later versions of Matsushita and "Creative" Compact Disc drives use a
basic IDE interface, so these other drives must use an IDE driver, such
as \fBata\fR(4).
.Pp
-The TEAC CD-55 4X Compact Disc drive also uses the same Creative/Panasonic
+The TEAC CD-55 4X Compact Disc drive also uses the same Creative/Panasonic
electrical interface, but the TEAC drive is not command set compatible with
the Matsushita CR-56x drives. The TEAC drive cannot be used with
.Nm .
@@ -394,8 +394,8 @@ Used to access 2352-byte frames on a Compact Disc
recorded in any format and disables the disc eject controls.
.It Pa /boot/devices.hints
Specify the number of host interfaces and host adapter I/O port locations
-that
-.Nm
+that
+.Nm
should examine.
.It Pa /usr/src/sys/dev/matcd/*
Source code for
@@ -429,7 +429,7 @@ Drives on a second host interface are considered logical
drive numbers 4 through 7, drives 8 through 11 are on the third interface
and 12 through 15 are on the fourth. The first drive on the second host
interface is always logical drive 4 regardless of how many drives are
-present on the first host interface.
+present on the first host interface.
.Pp
Host interfaces are numbered as specified in the \fI/boot/devices.hints\fR
file.
@@ -447,7 +447,7 @@ All rights reserved.
The
.Nm
driver originally appeared in
-.Fx 2.0.5 . The
+.Fx 2.0.5 . The
.Fx
5.1.x compatible implementation described here appeared in
.Fx
diff --git a/share/man/man4/multicast.4 b/share/man/man4/multicast.4
index e71c16d..914013a 100644
--- a/share/man/man4/multicast.4
+++ b/share/man/man4/multicast.4
@@ -182,7 +182,7 @@ The
contains the maximum rate (in bits/s) of the multicast data packets forwarded
on that vif.
Value of 0 means no limit.
-The
+The
.Dq vif_local_address
contains the local IP address of the corresponding local interface.
The
@@ -393,7 +393,7 @@ to preserve backward compatibility (binary and API),
and at the same time to allow user-level processes to take advantage of
the new features (if the kernel supports them).
.Pp
-One of the mechanisms that allows us to preserve the backward
+One of the mechanisms that allows us to preserve the backward
compatibility is a sort of negotiation
between the user-level process and the kernel:
.Bl -enum
@@ -707,7 +707,7 @@ the following:
*
* Measurement works as follows:
*
- * For >= measurements:
+ * For >= measurements:
* The first packet marks the start of a measurement interval.
* During an interval we count packets and bytes, and when we
* pass the threshold we deliver an upcall and we are done.
@@ -860,7 +860,7 @@ indicate the particular measured values.
However, because of the way
the particular intervals are measured, the user should be careful how
bu_measured.b_time is used.
-For example, if the
+For example, if the
filter is installed to trigger an upcall if the number of packets
is >= 1, then
.Dq bu_measured
diff --git a/share/man/man4/ng_atmpif.4 b/share/man/man4/ng_atmpif.4
index 189ccae..f76aea3 100644
--- a/share/man/man4/ng_atmpif.4
+++ b/share/man/man4/ng_atmpif.4
@@ -46,7 +46,7 @@ The
.Nm
netgraph node type allows the emulation of
.Xr atm 8
-(netatm/HARP) Physical devices (PIF) to be connected to the
+(netatm/HARP) Physical devices (PIF) to be connected to the
.Xr netgraph 4
networking subsystem.
Moreover it includes protection of the PDU against duplication and
diff --git a/share/man/man4/ng_sppp.4 b/share/man/man4/ng_sppp.4
index 2866b38..39b3336 100644
--- a/share/man/man4/ng_sppp.4
+++ b/share/man/man4/ng_sppp.4
@@ -146,6 +146,6 @@ The
node type was implemented for
.Fx 5.0 .
It was included to the system since
-.Fx 5.3 .
+.Fx 5.3 .
.Sh AUTHOR
.An Copyright (C) 2003-2004 Roman Kurakin Aq rik@cronyx.ru
diff --git a/share/man/man4/ng_sscop.4 b/share/man/man4/ng_sscop.4
index 6c6ed40..aa3d6ae 100644
--- a/share/man/man4/ng_sscop.4
+++ b/share/man/man4/ng_sscop.4
@@ -153,7 +153,7 @@ state and the lower hook is still connected, an
.Dv SSCOP_RELEASE_request
is executed to release the SSCOP connection.
.It Dv manage
-This is the management interface defined in the standard.
+This is the management interface defined in the standard.
The data structure used here is:
.Bd -literal
struct sscop_marg {
@@ -190,7 +190,7 @@ The
.Nm
node understands the generic messages plus the following:
.Bl -tag -width xxx
-.It Dv NGM_SSCOP_SETPARAM
+.It Dv NGM_SSCOP_SETPARAM
Set operational parameters of the SSCOP instance and takes the
following structure:
.Bd -literal
@@ -268,16 +268,16 @@ but that could not be set and
is an
.Xr errno 3
code describing why the parameter could not be set.
-.It Dv NGM_SSCOP_GETPARAM
+.It Dv NGM_SSCOP_GETPARAM
This message returns the current operational parameters of the SSCOP
instance in a
.Fa sscop_param
structure.
-.It Dv NGM_SSCOP_ENABLE
+.It Dv NGM_SSCOP_ENABLE
This message creates the actual SSCOP instance and initializes it.
Until this is done, parameters may neither be retrieved not set and all
message received on any hook are discarded.
-.It Dv NGM_SSCOP_DISABLE
+.It Dv NGM_SSCOP_DISABLE
Destroy the SSCOP instance. After this all messages on any hooks are
discarded.
.It Dv NGM_SSCOP_SETDEBUG
@@ -323,7 +323,7 @@ The space is computed as the difference of the
.Fa max_queuelen_packets
and
.Fa current
-members of the
+members of the
.Fa ngm_queue_state
structure.
.It Dv NGM_SYNC_QUEUE_STATE
diff --git a/share/man/man4/stg.4 b/share/man/man4/stg.4
index 68956c5..4c170ed 100644
--- a/share/man/man4/stg.4
+++ b/share/man/man4/stg.4
@@ -59,7 +59,7 @@ MELCO IFC-SC
RATOC REX-5536, REX-5536AM, REX-5536M, REX-9836A
.El
.Pp
-Note that the Adaptec 2920C is supported by the
+Note that the Adaptec 2920C is supported by the
.Sy ahc
driver.
.Sh SEE ALSO
diff --git a/share/man/man7/development.7 b/share/man/man7/development.7
index eac6290..4f03342 100644
--- a/share/man/man7/development.7
+++ b/share/man/man7/development.7
@@ -376,7 +376,7 @@ Many developers choose to maintain a local branch of
to test patches or build a custom distribution.
This can be done with CVS or another source code management system
(SubVersion, Perforce, BitKeeper) with its own repository.
-Since the main
+Since the main
.Fx
tree is based on CVS, the former is convenient.
.Pp
diff --git a/share/man/man9/taskqueue.9 b/share/man/man9/taskqueue.9
index ef323ff..0848242 100644
--- a/share/man/man9/taskqueue.9
+++ b/share/man/man9/taskqueue.9
@@ -186,7 +186,7 @@ allowing any further initialisation to be performed
The system provides three global taskqueues,
.Va taskqueue_swi ,
.Va taskqueue_swi_giant ,
-and
+and
.Va taskqueue_thread .
The swi taskqueues are run via a software interrupt mechanism.
The taskqueue_swi queue runs without the protection of the Giant kernel lock,
diff --git a/share/man/man9/watchdog.9 b/share/man/man9/watchdog.9
index b6abc44..71f635d 100644
--- a/share/man/man9/watchdog.9
+++ b/share/man/man9/watchdog.9
@@ -62,5 +62,5 @@ behaviour is recommended.
.Xr watchdog 4
.Sh AUTHORS
.An -nosplit
-The watchdog facility and this manual page was written
+The watchdog facility and this manual page was written
.An Poul-Henning Kamp Aq phk@FreeBSD.org .
diff --git a/usr.bin/makewhatis/makewhatis.local.8 b/usr.bin/makewhatis/makewhatis.local.8
index a050f66..1261667 100644
--- a/usr.bin/makewhatis/makewhatis.local.8
+++ b/usr.bin/makewhatis/makewhatis.local.8
@@ -36,20 +36,20 @@
.Nm /usr/libexec/catman.local
.Op options
.Ar directories ...
-.Sh DESCRIPTION
+.Sh DESCRIPTION
The
.Nm
utility starts
.Xr makewhatis 1
only for file systems physically mounted on the system
-where the
+where the
.Nm
is being executed. Running makewhatis
-by
+by
.Pa periodic weekly
for rw nfs-mounted /usr may kill
your NFS server -- all NFS clients start makewhatis at the same time!
-So use this wrapper for
+So use this wrapper for
.Xr cron 8
instead of calling makewhatis directly.
The
diff --git a/usr.bin/sed/sed.1 b/usr.bin/sed/sed.1
index 38106a5..8d6ce4a1 100644
--- a/usr.bin/sed/sed.1
+++ b/usr.bin/sed/sed.1
@@ -161,7 +161,7 @@ address. The end of the range is the next following pattern space
that matches the second address. If the second address is a number
less than or equal to the line number first selected, only that
line is selected. In the case when the second address is a context
-address,
+address,
.Nm
does not re-match the second address against the
pattern space that matched the first address. Starting at the
diff --git a/usr.bin/systat/systat.1 b/usr.bin/systat/systat.1
index 01f3dce..ec550f1 100644
--- a/usr.bin/systat/systat.1
+++ b/usr.bin/systat/systat.1
@@ -218,7 +218,7 @@ display,
except that it displays
.Tn IPv6
statics.
-It does not display
+It does not display
.Tn UDP statistics.
.It Ic tcp
Like
diff --git a/usr.sbin/acpi/acpidump/acpidump.8 b/usr.sbin/acpi/acpidump/acpidump.8
index f32e37d..7406aca 100644
--- a/usr.sbin/acpi/acpidump/acpidump.8
+++ b/usr.sbin/acpi/acpidump/acpidump.8
@@ -152,8 +152,8 @@ Verbose messages are enabled.
In the current implementation,
.Nm
does not dump the
-Secondary System Descriptor Table (SSDT),
-Embedded Controller Descriptor Table (ECDT),
+Secondary System Descriptor Table (SSDT),
+Embedded Controller Descriptor Table (ECDT),
or BOOT structures.
.Sh FILES
.Bl -tag -width /dev/mem
diff --git a/usr.sbin/mixer/mixer.8 b/usr.sbin/mixer/mixer.8
index 4d73ac5..6cf8648 100644
--- a/usr.sbin/mixer/mixer.8
+++ b/usr.sbin/mixer/mixer.8
@@ -84,7 +84,7 @@ displays the current settings for all supported devices, followed by information
about the current recording input devices.
If the
.Ar dev
-argument is specified,
+argument is specified,
.Nm
displays only the value for that
.Ar dev .
OpenPOWER on IntegriCloud