diff options
| -rw-r--r-- | sys/conf/Makefile.sparc64 | 348 | ||||
| -rw-r--r-- | sys/conf/files.sparc64 | 36 | ||||
| -rw-r--r-- | sys/conf/ldscript.sparc64 | 267 | ||||
| -rw-r--r-- | sys/conf/options.sparc64 | 6 |
4 files changed, 657 insertions, 0 deletions
diff --git a/sys/conf/Makefile.sparc64 b/sys/conf/Makefile.sparc64 new file mode 100644 index 0000000..94b7769 --- /dev/null +++ b/sys/conf/Makefile.sparc64 @@ -0,0 +1,348 @@ +# Makefile.sparc64 -- with config changes. +# Copyright 1990 W. Jolitz +# from: @(#)Makefile.i386 7.1 5/10/91 +# $FreeBSD$ +# +# Makefile for FreeBSD +# +# This makefile is constructed from a machine description: +# config machineid +# Most changes should be made in the machine description +# /sys/sparc64/conf/``machineid'' +# after which you should do +# config machineid +# Generic makefile changes should be made in +# /sys/sparc64/conf/Makefile.sparc64 +# after which config should be rerun for all machines. +# + +MACHINE_ARCH= sparc64 + +AR= sparc64-ar +CC= sparc64-unknown-elf-gcc -D__sparc64__ +LD= sparc64-ld +NM= sparc64-nm +OBJCOPY= sparc64-objcopy +OBJDUMP= sparc64-objdump +RANLIB= sparc64-ranlib +SIZE= sparc64-size + +CWARNFLAGS= -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes \ + -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual \ + -ansi + +# Which version of config(8) is required. +%VERSREQ= 500007 + +# Can be overridden by makeoptions or /etc/make.conf +KERNEL_KO?= kernel +KERNEL?= kernel +KODIR?= /boot/${KERNEL} +STD8X16FONT?= iso + +.if !defined(S) +.if exists(./@/.) +S= ./@ +.else +S= ../../.. +.endif +.endif +M= ${MACHINE_ARCH} + +SIZE?= size +OBJCOPY?= objcopy + +COPTFLAGS?=-O -pipe +.if !defined(NO_CPU_COPTFLAGS) +COPTFLAGS+= ${_CPUCFLAGS} +.endif +INCLUDES= -nostdinc -I- ${INCLMAGIC} -I. -I$S -I$S/dev +# This hack is to allow kernel compiles to succeed on machines w/out srcdist +.if exists($S/../include) +INCLUDES+= -I$S/../include +.else +INCLUDES+= -I/usr/include +.endif + +COPTS= ${INCLUDES} ${IDENT} -D_KERNEL -include opt_global.h +CFLAGS= ${COPTFLAGS} ${CWARNFLAGS} ${DEBUG} ${COPTS} + +# XXX LOCORE means "don't declare C stuff" not "for locore.s". +ASM_CFLAGS= -x assembler-with-cpp -DLOCORE ${CFLAGS} + +# Select the correct set of tools. Can't set OBJFORMAT here because it +# doesn't get exported into the environment, and if it were exported +# then it might break building of utilities. +FMT= +CFLAGS+= ${FMT} + +DEFINED_PROF= ${PROF} +.if defined(PROF) +CFLAGS+= -malign-functions=4 +.if ${PROFLEVEL} >= 2 +IDENT+= -DGPROF4 -DGUPROF +PROF+= -mprofiler-epilogue +.endif +.endif + +# Put configuration-specific C flags last (except for ${PROF}) so that they +# can override the others. +CFLAGS+= ${CONF_CFLAGS} + +NORMAL_C= ${CC} -c ${CFLAGS} ${PROF} ${.IMPSRC} +NORMAL_C_C= ${CC} -c ${CFLAGS} ${PROF} ${.IMPSRC} +NORMAL_S= ${CC} -c ${ASM_CFLAGS} ${.IMPSRC} +PROFILE_C= ${CC} -c ${CFLAGS} ${.IMPSRC} + +NORMAL_M= perl5 $S/kern/makeobjops.pl -c $<; \ + ${CC} -c ${CFLAGS} ${PROF} ${.PREFIX}.c + +GEN_CFILES= $S/$M/$M/genassym.c +SYSTEM_CFILES= vnode_if.c hints.c config.c +SYSTEM_SFILES= $S/$M/$M/locore.s +SYSTEM_DEP= Makefile ${SYSTEM_OBJS} +SYSTEM_OBJS= locore.o vnode_if.o ${OBJS} hints.o config.o hack.So +SYSTEM_LD= @${LD} ${FMT} -Bdynamic -T $S/conf/ldscript.$M \ + -export-dynamic -dynamic-linker /red/herring \ + -o ${.TARGET} -X ${SYSTEM_OBJS} vers.o +SYSTEM_LD_TAIL= @${OBJCOPY} --strip-symbol gcc2_compiled. ${.TARGET} ; \ + ${SIZE} ${FMT} ${.TARGET} ; chmod 755 ${.TARGET} +SYSTEM_DEP+= $S/conf/ldscript.$M + +%BEFORE_DEPEND + +%OBJS + +%FILES.c + +%FILES.s + +%FILES.m + +%CLEAN + +.PHONY: all modules + +all: ${KERNEL_KO} + +depend: kernel-depend +clean: kernel-clean +cleandepend: kernel-cleandepend +clobber: kernel-clobber +tags: kernel-tags +install: kernel-install +install.debug: kernel-install.debug +reinstall: kernel-reinstall +reinstall.debug: kernel-reinstall.debug + +.if !defined(DEBUG) +FULLKERNEL= ${KERNEL_KO} +.else +FULLKERNEL= ${KERNEL_KO}.debug +${KERNEL_KO}: ${FULLKERNEL} + ${OBJCOPY} --strip-debug ${FULLKERNEL} ${KERNEL_KO} +.endif + +${FULLKERNEL}: ${SYSTEM_DEP} vers.o + @rm -f ${.TARGET} + @echo linking ${.TARGET} + ${SYSTEM_LD} + ${SYSTEM_LD_TAIL} + +.if !exists(.depend) +${SYSTEM_OBJS}: vnode_if.h ${BEFORE_DEPEND:M*.h} ${MFILES:T:S/.m$/.h/} +.endif + +.for mfile in ${MFILES} +${mfile:T:S/.m$/.h/}: ${mfile} + perl5 $S/kern/makeobjops.pl -h ${mfile} +.endfor + +kernel-clean: + rm -f *.o *.so *.So *.ko *.s eddep errs \ + ${FULLKERNEL} ${KERNEL_KO} linterrs makelinks \ + setdef[01].c setdefs.h tags \ + vers.c vnode_if.c vnode_if.h \ + ${MFILES:T:S/.m$/.c/} ${MFILES:T:S/.m$/.h/} \ + ${CLEAN} + +kernel-clobber: + find . -type f ! -name version -delete + +#lint: /tmp +# @lint -hbxn -DGENERIC -Dvolatile= ${COPTS} \ +# $S/$M/$M/Locore.c ${CFILES} | \ +# grep -v 'struct/union .* never defined' | \ +# grep -v 'possible pointer alignment problem' + +locore.o: $S/$M/$M/locore.s assym.s + ${NORMAL_S} + +# This is a hack. BFD "optimizes" away dynamic mode if there are no +# dynamic references. We could probably do a '-Bforcedynamic' mode like +# in the a.out ld. For now, this works. +hack.So: Makefile + touch hack.c + ${CC} ${FMT} -Wl,-shared -nostdlib hack.c -o hack.So + rm -f hack.c + +# this rule stops ./assym.s in .depend from causing problems +./assym.s: assym.s + +assym.s: $S/kern/genassym.sh genassym.o + OBJFORMAT=elf NM=${NM} sh $S/kern/genassym.sh genassym.o > ${.TARGET} + +genassym.o: $S/$M/$M/genassym.c + ${CC} -c ${CFLAGS} -elf $S/$M/$M/genassym.c + +${SYSTEM_OBJS} genassym.o vers.o: opt_global.h + +kernel-depend: + rm -f .olddep + if [ -f .depend ]; then mv .depend .olddep; fi + ${MAKE} _kernel-depend + +_kernel-depend: assym.s vnode_if.h ${BEFORE_DEPEND} \ + ${CFILES} ${SYSTEM_CFILES} ${GEN_CFILES} ${SFILES} \ + ${SYSTEM_SFILES} ${MFILES:T:S/.m$/.h/} + if [ -f .olddep ]; then mv .olddep .depend; fi + rm -f .newdep + env MKDEP_CPP="${CC} -E" \ + mkdep -a -f .newdep ${CFLAGS} ${CFILES} ${SYSTEM_CFILES} ${GEN_CFILES} + env MKDEP_CPP="${CC} -E" \ + mkdep -a -f .newdep ${ASM_CFLAGS} ${SFILES} ${SYSTEM_SFILES} + rm -f .depend + mv .newdep .depend + +kernel-cleandepend: + rm -f .depend + +links: + egrep '#if' ${CFILES} | sed -f $S/conf/defines | \ + sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink + echo ${CFILES} | tr -s ' ' '\12' | sed 's/\.c/.o/' | \ + sort -u | comm -23 - dontlink | \ + sed 's,../.*/\(.*.o\),rm -f \1;ln -s ../GENERIC/\1 \1,' > makelinks + sh makelinks; rm -f dontlink + +kernel-tags: + @[ -f .depend ] || { echo "you must make depend first"; exit 1; } + sh $S/conf/systags.sh + rm -f tags1 + sed -e 's, ../, ,' tags > tags1 + +kernel-install kernel-install.debug: +.if exists(${DESTDIR}/boot) + @if [ ! -f ${DESTDIR}/boot/device.hints ] ; then \ + echo "You must set up a ${DESTDIR}/boot/device.hints file first." ; \ + exit 1 ; \ + fi + @if [ x"`grep device.hints ${DESTDIR}/boot/defaults/loader.conf ${DESTDIR}/boot/loader.conf`" = "x" ]; then \ + echo "You must activate /boot/device.hints in loader.conf." ; \ + exit 1 ; \ + fi +.endif + @if [ ! -f ${KERNEL_KO}${.TARGET:S/kernel-install//} ] ; then \ + echo "You must build a kernel first." ; \ + exit 1 ; \ + fi +.if exists(${DESTDIR}${KODIR}) +.if exists(${DESTDIR}${KODIR}.old) + @-chflags -R noschg ${DESTDIR}${KODIR}.old + -rm -rf ${DESTDIR}${KODIR}.old +.endif + mv ${DESTDIR}${KODIR} ${DESTDIR}${KODIR}.old +.endif + mkdir -p ${DESTDIR}${KODIR} + install -c -m 555 -o root -g wheel \ + ${KERNEL_KO}${.TARGET:S/kernel-install//} ${DESTDIR}${KODIR} + +kernel-reinstall kernel-reinstall.debug: + @-chflags -R noschg ${DESTDIR}${KODIR} + install -c -m 555 -o root -g wheel \ + ${KERNEL_KO}${.TARGET:S/kernel-reinstall//} ${DESTDIR}${KODIR} + +.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists($S/modules) +all: modules +depend: modules-depend +clean: modules-clean +cleandepend: modules-cleandepend +cleandir: modules-cleandir +clobber: modules-clobber +tags: modules-tags +install: modules-install +install.debug: modules-install.debug +reinstall: modules-reinstall +reinstall.debug: modules-reinstall.debug +.endif + +MKMODULESENV= MAKEOBJDIRPREFIX=${.OBJDIR}/modules KMODDIR=${KODIR} +.if defined(MODULES_OVERRIDE) +MKMODULESENV+= MODULES_OVERRIDE="${MODULES_OVERRIDE}" +.endif + +modules: + @mkdir -p ${.OBJDIR}/modules + cd $S/modules ; env ${MKMODULESENV} ${MAKE} obj ; \ + env ${MKMODULESENV} ${MAKE} all + +modules-depend: + @mkdir -p ${.OBJDIR}/modules + cd $S/modules ; env ${MKMODULESENV} ${MAKE} obj ; \ + env ${MKMODULESENV} ${MAKE} depend + +modules-clean: + cd $S/modules ; env ${MKMODULESENV} ${MAKE} clean + +modules-cleandepend: + cd $S/modules ; env ${MKMODULESENV} ${MAKE} cleandepend + +modules-clobber: modules-clean + rm -rf ${MKMODULESENV} + +modules-cleandir: + cd $S/modules ; env ${MKMODULESENV} ${MAKE} cleandir + +modules-tags: + cd $S/modules ; env ${MKMODULESENV} ${MAKE} tags + +modules-install modules-install.debug: + cd $S/modules ; env ${MKMODULESENV} ${MAKE} install + +modules-reinstall modules-reinstall.debug: + cd $S/modules ; env ${MKMODULESENV} ${MAKE} install + +config.o: + ${NORMAL_C} + +vers.c: $S/conf/newvers.sh $S/sys/param.h ${SYSTEM_DEP} + sh $S/conf/newvers.sh ${KERN_IDENT} ${IDENT} + +# XXX strictly, everything depends on Makefile because changes to ${PROF} +# only appear there, but we don't handle that. +vers.o: + ${NORMAL_C} + +hints.o: hints.c + ${NORMAL_C} + +vnode_if.c: $S/kern/vnode_if.pl $S/kern/vnode_if.src + perl5 $S/kern/vnode_if.pl -c $S/kern/vnode_if.src + +vnode_if.h: $S/kern/vnode_if.pl $S/kern/vnode_if.src + perl5 $S/kern/vnode_if.pl -h $S/kern/vnode_if.src + +vnode_if.o: + ${NORMAL_C} + +# Commented out for now pending a better solution. +# How do we pick up compiler version specific flags?? +#.if exists($S/../share/mk) +#.include "$S/../share/mk/bsd.kern.mk" +#.else +.include <bsd.kern.mk> +#.endif + +%RULES + +# DO NOT DELETE THIS LINE -- make depend uses it diff --git a/sys/conf/files.sparc64 b/sys/conf/files.sparc64 new file mode 100644 index 0000000..ee8c88f --- /dev/null +++ b/sys/conf/files.sparc64 @@ -0,0 +1,36 @@ +# This file tells config what files go into building a kernel, +# files marked standard are always included. +# +# $FreeBSD$ +# +# The long compile-with and dependency lines are required because of +# limitations in config: backslash-newline doesn't work in strings, and +# dependency lines other than the first are silently ignored. +# + +libkern/ffs.c standard +kern/subr_diskmbr.c standard +sparc64/sparc64/autoconf.c standard +sparc64/sparc64/clock.c standard +sparc64/sparc64/db_disasm.c optional ddb +sparc64/sparc64/db_interface.c optional ddb +sparc64/sparc64/db_trace.c optional ddb +sparc64/sparc64/elf_machdep.c standard +# locore.s needs to be handled in Makefile to put it first. Otherwise it's +# now normal. +# sparc64/sparc64/locore.s standard +sparc64/sparc64/exception.s standard +sparc64/sparc64/machdep.c standard +sparc64/sparc64/pmap.c standard +sparc64/sparc64/procfs_machdep.c standard +sparc64/sparc64/pv.c standard +sparc64/sparc64/support.s standard +sparc64/sparc64/sys_machdep.c standard +sparc64/sparc64/swtch.s standard +sparc64/sparc64/trap.c standard +sparc64/sparc64/tsb.c standard +sparc64/sparc64/upa.c standard +sparc64/sparc64/vm_machdep.c standard + +dev/ofw/openfirm.c standard +dev/ofw/ofw_console.c standard diff --git a/sys/conf/ldscript.sparc64 b/sys/conf/ldscript.sparc64 new file mode 100644 index 0000000..cc65cd4 --- /dev/null +++ b/sys/conf/ldscript.sparc64 @@ -0,0 +1,267 @@ +/* $FreeBSD$ */ +OUTPUT_FORMAT("elf64-sparc", "elf64-sparc", + "elf64-sparc") +OUTPUT_ARCH(sparc:v9) +ENTRY(_start) + SEARCH_DIR(/home/jake/sparc64-unknown-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = 0x60000000000 + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .gnu.version : { *(.gnu.version) } + .gnu.version_d : { *(.gnu.version_d) } + .gnu.version_r : { *(.gnu.version_r) } + .rel.init : { *(.rel.init) } + .rela.init : { *(.rela.init) } + .rel.text : + { + *(.rel.text) + *(.rel.text.*) + *(.rel.gnu.linkonce.t.*) + } + .rela.text : + { + *(.rela.text) + *(.rela.text.*) + *(.rela.gnu.linkonce.t.*) + } + .rel.fini : { *(.rel.fini) } + .rela.fini : { *(.rela.fini) } + .rel.rodata : + { + *(.rel.rodata) + *(.rel.rodata.*) + *(.rel.gnu.linkonce.r.*) + } + .rela.rodata : + { + *(.rela.rodata) + *(.rela.rodata.*) + *(.rela.gnu.linkonce.r.*) + } + .rel.data : + { + *(.rel.data) + *(.rel.data.*) + *(.rel.gnu.linkonce.d.*) + } + .rela.data : + { + *(.rela.data) + *(.rela.data.*) + *(.rela.gnu.linkonce.d.*) + } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.sdata : + { + *(.rel.sdata) + *(.rel.sdata.*) + *(.rel.gnu.linkonce.s.*) + } + .rela.sdata : + { + *(.rela.sdata) + *(.rela.sdata.*) + *(.rela.gnu.linkonce.s.*) + } + .rel.sbss : + { + *(.rel.sbss) + *(.rel.sbss.*) + *(.rel.gnu.linkonce.sb.*) + } + .rela.sbss : + { + *(.rela.sbss) + *(.rela.sbss.*) + *(.rel.gnu.linkonce.sb.*) + } + .rel.sdata2 : + { + *(.rel.sdata2) + *(.rel.sdata2.*) + *(.rel.gnu.linkonce.s2.*) + } + .rela.sdata2 : + { + *(.rela.sdata2) + *(.rela.sdata2.*) + *(.rela.gnu.linkonce.s2.*) + } + .rel.sbss2 : + { + *(.rel.sbss2) + *(.rel.sbss2.*) + *(.rel.gnu.linkonce.sb2.*) + } + .rela.sbss2 : + { + *(.rela.sbss2) + *(.rela.sbss2.*) + *(.rela.gnu.linkonce.sb2.*) + } + .rel.bss : + { + *(.rel.bss) + *(.rel.bss.*) + *(.rel.gnu.linkonce.b.*) + } + .rela.bss : + { + *(.rela.bss) + *(.rela.bss.*) + *(.rela.gnu.linkonce.b.*) + } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : + { + KEEP (*(.init)) + } = 0x60000000000 + .text : + { + *(.trap) + *(.text) + *(.text.*) + *(.stub) + /* .gnu.warning sections are handled specially by elf32.em. */ + *(.gnu.warning) + *(.gnu.linkonce.t.*) + } = 0x60000000000 + .fini : + { + KEEP (*(.fini)) + } = 0x60000000000 + PROVIDE (__etext = .); + PROVIDE (_etext = .); + PROVIDE (etext = .); + .rodata : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r.*) } + .rodata1 : { *(.rodata1) } + .sdata2 : { *(.sdata2) *(.sdata2.*) *(.gnu.linkonce.s2.*) } + .sbss2 : { *(.sbss2) *(.sbss2.*) *(.gnu.linkonce.sb2.*) } + . = ALIGN(0x2000) + (. & (0x2000 - 1)); + .data : + { + *(.data) + *(.data.*) + *(.gnu.linkonce.d.*) + SORT(CONSTRUCTORS) + } + .data1 : { *(.data1) } + .eh_frame : { KEEP (*(.eh_frame)) } + .gcc_except_table : { *(.gcc_except_table) } + .ctors : + { + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + KEEP (*crtbegin.o(.ctors)) + /* We don't want to include the .ctor section from + from the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + } + .dtors : + { + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + } + .plt : { *(.plt) } + .got : { *(.got.plt) *(.got) } + .dynamic : { *(.dynamic) } + /* We want the small data sections together, so single-instruction offsets + can access them all, and initialized data all before uninitialized, so + we can shorten the on-disk segment size. */ + .sdata : + { + *(.sdata) + *(.sdata.*) + *(.gnu.linkonce.s.*) + } + _edata = .; + PROVIDE (edata = .); + __bss_start = .; + .sbss : + { + PROVIDE (__sbss_start = .); + PROVIDE (___sbss_start = .); + *(.dynsbss) + *(.sbss) + *(.sbss.*) + *(.gnu.linkonce.sb.*) + *(.scommon) + PROVIDE (__sbss_end = .); + PROVIDE (___sbss_end = .); + } + .bss : + { + *(.dynbss) + *(.bss) + *(.bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + /* Align here to ensure that the .bss section occupies space up to + _end. Align after .bss to ensure correct alignment even if the + .bss section disappears because there are no input sections. */ + . = ALIGN(64 / 8); + } + . = ALIGN(64 / 8); + _end = .; + PROVIDE (end = .); + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + Symbols in the DWARF debugging sections are relative to the beginning + of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info) *(.gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } + /* These must appear regardless of . */ +} diff --git a/sys/conf/options.sparc64 b/sys/conf/options.sparc64 new file mode 100644 index 0000000..85eb98c --- /dev/null +++ b/sys/conf/options.sparc64 @@ -0,0 +1,6 @@ +# $FreeBSD$ + +SUN4U opt_global.h + +SHOW_BUSYBUFS +PANIC_REBOOT_WAIT_TIME opt_panic.h |
