diff options
30 files changed, 141 insertions, 101 deletions
diff --git a/share/man/man4/acpi.4 b/share/man/man4/acpi.4 index 950ab82..b7f2254 100644 --- a/share/man/man4/acpi.4 +++ b/share/man/man4/acpi.4 @@ -237,7 +237,11 @@ Supports system cooling and heat management. Implements a timecounter using the ACPI fixed-frequency timer. .It Li video .Pq Vt device -Supports acpi_video which may conflict with agp device. +Supports +.Xr acpi_video 4 +which may conflict with +.Xr agp 4 +device. .El .Pp It is also possible to avoid portions of the ACPI namespace which diff --git a/share/man/man4/cpufreq.4 b/share/man/man4/cpufreq.4 index fa3839a..155e66e 100644 --- a/share/man/man4/cpufreq.4 +++ b/share/man/man4/cpufreq.4 @@ -62,7 +62,7 @@ interface of all possible levels. Users can access this interface directly via .Xr sysctl 8 or by indicating to -.Pa power_profile +.Pa /etc/rc.d/power_profile that it should switch settings when the AC line state changes via .Xr rc.conf 5 . .Sh SYSCTLS @@ -106,7 +106,7 @@ Intel Enhanced SpeedStep .It Pa ichss Intel SpeedStep for ICH .It Pa powernow -AMD PowerNow! for K7 and K8 +AMD PowerNow!\& for K7 and K8 .It Pa smist Intel SMI-based SpeedStep for PIIX4 .El diff --git a/share/man/man4/ed.4 b/share/man/man4/ed.4 index 58f9e31..bac4df6 100644 --- a/share/man/man4/ed.4 +++ b/share/man/man4/ed.4 @@ -30,7 +30,7 @@ .\" .\" $FreeBSD$ .\" -.Dd February 9, 2005 +.Dd February 23, 2005 .Dt ED 4 .Os .Sh NAME diff --git a/share/man/man4/geom.4 b/share/man/man4/geom.4 index e0122c3..78c5584b 100644 --- a/share/man/man4/geom.4 +++ b/share/man/man4/geom.4 @@ -338,28 +338,28 @@ sysctl. All of these flags are off by default, and great care should be taken in turning them on. .Bl -tag -width FAIL -.It 0x01 (G_T_TOPOLOGY) +.It 0x01 Pq Dv G_T_TOPOLOGY Provide tracing of topology change events. -.It 0x02 (G_T_BIO) +.It 0x02 Pq Dv G_T_BIO Provide tracing of buffer I/O requests. -.It 0x04 (G_T_ACCESS) +.It 0x04 Pq Dv G_T_ACCESS Provide tracing of access check controls. .It 0x08 (unused) .It 0x10 (allow foot shooting) Allow writing to Rank 1 providers. This would, for example, allow the super-user to overwrite the MBR on the root -disk or write random sectors elsewhere to a mounted disk. The implications -are obvious. -.It 0x20 (G_T_DETAILS) +disk or write random sectors elsewhere to a mounted disk. +The implications are obvious. +.It 0x20 Pq Dv G_T_DETAILS This appears to be unused at this time. -.It 0x40 (G_F_DISKIOCTL) +.It 0x40 Pq Dv G_F_DISKIOCTL This appears to be unused at this time. -.It 0x80 (G_F_CTLDUMP) +.It 0x80 Pq Dv G_F_CTLDUMP Dump contents of gctl requests. .El .Sh HISTORY This software was developed for the FreeBSD Project by Poul-Henning Kamp -and NAI Labs, the Security Research Division of Network Associates, Inc. +and NAI Labs, the Security Research Division of Network Associates, Inc.\& under DARPA/SPAWAR contract N66001-01-C-8035 ("CBOSS"), as part of the DARPA CHATS research program. .Pp diff --git a/share/man/man4/icmp6.4 b/share/man/man4/icmp6.4 index d5c1be4..83aff0e 100644 --- a/share/man/man4/icmp6.4 +++ b/share/man/man4/icmp6.4 @@ -196,24 +196,32 @@ is modified to allow all message types. Ignore all incoming messages. .Va filterp is modified to ignore all message types. -.It Fn "void ICMP6_FILTER_SETPASS" "int type" \ - "struct icmp6_filter *filterp" +.It Xo +.Ft void +.Fn ICMP6_FILTER_SETPASS "int type" "struct icmp6_filter *filterp" +.Xc Allow ICMPv6 messages with the given .Fa type . .Va filterp is modified to allow such messages. -.It Fn "void ICMP6_FILTER_SETBLOCK" "int type" \ - "struct icmp6_filter *filterp" +.It Xo +.Ft void +.Fn ICMP6_FILTER_SETBLOCK" "int type" "struct icmp6_filter *filterp" +.Xc Ignore ICMPv6 messages with the given .Fa type . .Va filterp is modified to ignore such messages. -.It Fn "int ICMP6_FILTER_WILLPASS" "int type" \ - "const struct icmp6_filter *filterp" +.It Xo +.Ft int +.Fn ICMP6_FILTER_WILLPASS" "int type" "const struct icmp6_filter *filterp" +.Xc Determine if the given filter will allow an ICMPv6 message of the given type. -.It Fn "int ICMP6_FILTER_WILLBLOCK" "int type" \ - "const struct icmp6_filter *filterp" +.It Xo +.Ft int +.Fn ICMP6_FILTER_WILLBLOCK" "int type" "const struct icmp6_filter *filterp" +.Xc Determine if the given filter will ignore an ICMPv6 message of the given type. .El diff --git a/share/man/man4/ng_netflow.4 b/share/man/man4/ng_netflow.4 index a250fe8..a21b341 100644 --- a/share/man/man4/ng_netflow.4 +++ b/share/man/man4/ng_netflow.4 @@ -243,10 +243,10 @@ we do not use tee, but send packets back to ether node. SEQ .Ed .Sh SEE ALSO -.Xr flowctl 8 , .Xr netgraph 4 , .Xr ng_ksocket 4 , .Xr ng_tee 4 , +.Xr flowctl 8 , .Xr ngctl 8 .Pp .Pa http://www.cisco.com/warp/public/cc/pd/iosw/ioft/neflct/tech/napps_wp.htm diff --git a/share/man/man4/ng_source.4 b/share/man/man4/ng_source.4 index 4e50c24..fee9000 100644 --- a/share/man/man4/ng_source.4 +++ b/share/man/man4/ng_source.4 @@ -64,32 +64,34 @@ The operation of the node is as follows. Packets received on the .Va input hook are queued internally. -When +When .Va output hook is connected, .Nm node assumes that its neighbour node is of -.Xr ng_ether +.Xr ng_ether 4 node type. -The neighbor is queried for its interface name. +The neighbour is queried for its interface name. +The .Nm node then uses queue of the interface for its evil purposes. +The .Nm node also disables .Va autosrc option on neighbour -.Xr ng_ether +.Xr ng_ether 4 node. -If interface name can't be obtained automatically, it should -be configured explicitly with help of -.Dv NGM_SOURCE_SETIFACE +If interface name cannot be obtained automatically, it should +be configured explicitly with the +.Dv NGM_SOURCE_SETIFACE control message, and .Va autosrc should be turned off on -.Xr ng_ether +.Xr ng_ether 4 node manually. .Pp -Once interface is configured, upon receival of +Once interface is configured, upon receipt of a .Dv NGM_SOURCE_START control message the node starts sending the previously queued packets out the @@ -100,8 +102,10 @@ While active, on every clock tick the node checks the available space in the interface queue and sends that many packets out its .Va output hook. -Once the number of packets indicated in the start message have been -sent, or upon reception of a stop message, the node stops sending data. +Once the number of packets indicated in the start message has been +sent, or upon receipt of a +.Dv NGM_SOURCE_STOP +message, the node stops sending data. .Sh CONTROL MESSAGES This node type supports the generic control messages as well as the following, which must be sent with the @@ -113,19 +117,19 @@ Returns a structure containing the following fields: .Bl -tag -width indent .It Va outOctets The number of octets/bytes sent out the -.Dv output +.Va output hook. .It Va outFrames The number of frames/packets sent out the -.Dv output +.Va output hook. .It Va queueOctets The number of octets queued from the -.Dv input +.Va input hook. .It Va queueFrames The number of frames queued from the -.Dv input +.Va input hook. .It Va startTime The time the last start message was received. @@ -155,23 +159,27 @@ This message requires a single .Vt uint64_t parameter which is the number of packets to send before stopping. -Node starts sending the queued packets out the output hook. -The output hook must be connected and node must have +Node starts sending the queued packets out the +.Va output +hook. +The +.Va output +hook must be connected and node must have interface configured. .It Dv NGM_SOURCE_STOP Pq Ic stop Stops the node if it is active. .It Dv NGM_SOURCE_CLR_DATA Pq Ic clrdata Clears the packets queued from the -.Dv input +.Va input hook. .It Dv NGM_SOURCE_SETIFACE Pq Ic setiface -This message requires a string argument - name of the interface -to be configured. +This message requires the name of the interface +to be configured as an argument. .El .Sh SHUTDOWN This node shuts down upon receipt of a .Dv NGM_SHUTDOWN -control message, when all hooks has been disconnected, or when the +control message, when all hooks have been disconnected, or when the .Va output hook has been disconnected. .Sh EXAMPLES @@ -186,11 +194,11 @@ For example, these commands load the .Nm ng_ether module and attach the -.Dv output +.Va output hook of a new .Nm source node to -.Dv orphans +.Va orphans hook of the .Li bge0: .Nm ng_ether @@ -218,7 +226,7 @@ can be used to generate these packets: To feed the output of the above TCL script to the .Nm source node's -.Dv input +.Va input hook via .Xr nghook 8 : .Pp @@ -232,7 +240,7 @@ Args: { queueOctets=64 queueFrames=1 } .Ed .Pp Send as many packets as required out the -.Dv output +.Va output hook: .Pp .Dl "ngctl msg bge0:orphans start 16" diff --git a/share/man/man4/snd_emu10k1.4 b/share/man/man4/snd_emu10k1.4 index 4ebaa14..ed71503 100644 --- a/share/man/man4/snd_emu10k1.4 +++ b/share/man/man4/snd_emu10k1.4 @@ -38,7 +38,7 @@ The .Nm bridge driver allows the generic audio driver .Xr sound 4 -to attach to the SoundBlaster Live! and Audigy audio cards. +to attach to the SoundBlaster Live!\& and Audigy audio cards. .Pp Digital output is supported by default. .Sh HARDWARE @@ -48,7 +48,7 @@ driver supports the following sound cards: .Pp .Bl -bullet -compact .It -Creative SoundBlaster Live! (EMU10K1 Chipset) +Creative SoundBlaster Live!\& (EMU10K1 Chipset) .It Creative SoundBlaster Audigy (EMU10K2 Chipset) .El diff --git a/share/man/man4/snd_maestro3.4 b/share/man/man4/snd_maestro3.4 index 8807b14..272eee7 100644 --- a/share/man/man4/snd_maestro3.4 +++ b/share/man/man4/snd_maestro3.4 @@ -65,7 +65,7 @@ ESS Technology Maestro3 .El .Sh DIAGNOSTICS The hardware volume control buttons can be connected to two different pin -sets(GPIO or GD) on the chip, depending on the manufacturer. +sets (GPIO or GD) on the chip, depending on the manufacturer. The driver has no way of determining this configuration, so a hint may be used to override the default guess. The default setting for hardware volume control assumes that GD pins diff --git a/share/man/man4/unix.4 b/share/man/man4/unix.4 index c556185..8a27de2 100644 --- a/share/man/man4/unix.4 +++ b/share/man/man4/unix.4 @@ -94,10 +94,14 @@ can be calculated by the macro defined in .In sys/un.h . The -.Ar sun_path -field must be terminated by a NUL character to be used with +.Va sun_path +field must be terminated by a +.Dv NUL +character to be used with .Fn SUN_LEN , -but the terminating NUL is +but the terminating +.Dv NUL +is .Em not part of the address. .Pp @@ -195,7 +199,6 @@ or .Xr listen 2 ) under different effective credentials. .Pp - .Tn UNIX domain sockets support a number of socket options which can be set with .Xr setsockopt 2 @@ -207,13 +210,21 @@ This option may be enabled on a .Dv SOCK_DGRAM or a .Dv SOCK_STREAM -socket. This option provides a mechanism for the receiver to +socket. +This option provides a mechanism for the receiver to receive the credentials of the process as a .Xr recvmsg 2 -control message. The msg_control field in the msghdr structure points -to a buffer that contains a cmsghdr structure followed by a variable -length sockcred structure, defined in -.Pa \*[Lt]sys/socket.h\*[Gt] +control message. +The +.Va msg_control +field in the +.Vt msghdr +structure points to a buffer that contains a +.Vt cmsghdr +structure followed by a variable length +.Vt sockcred +structure, defined in +.In sys/socket.h as follows: .Bd -literal struct sockcred { @@ -228,22 +239,27 @@ struct sockcred { .Pp The .Fn SOCKCREDSIZE -macro computes the size of the sockcred structure for a specified number +macro computes the size of the +.Vt sockcred +structure for a specified number of groups. -The cmsghdr fields have the following values: +The +.Vt cmsghdr +fields have the following values: .Bd -literal cmsg_len = sizeof(struct cmsghdr) + SOCKCREDSIZE(ngroups) cmsg_level = SOL_SOCKET cmsg_type = SCM_CREDS .Ed .It Dv LOCAL_CONNWAIT -Used with +Used with .Dv SOCK_STREAM sockets, this option causes the .Xr connect 2 function to block until .Xr accept 2 has been called on the listening socket. +.El .Sh SEE ALSO .Xr socket 2 , .Xr intro 4 diff --git a/share/man/man4/witness.4 b/share/man/man4/witness.4 index cb95a87..963aaf9 100644 --- a/share/man/man4/witness.4 +++ b/share/man/man4/witness.4 @@ -93,9 +93,10 @@ set via the read-only sysctl .Pp The sysctl .Va debug.witness.watch -specifies the level of witness involvment in the system. A value of -1 specifies that witness is enabled. A value of 0 specifies that -witness is disabled. This sysctl can be written to in order to +specifies the level of witness involvment in the system. +A value of 1 specifies that witness is enabled. +A value of 0 specifies that witness is disabled. +This sysctl can be written to in order to disable witness, however it may not be used to enable witness. .Va debug.witness.watch can be set via diff --git a/share/man/man5/autofs.5 b/share/man/man5/autofs.5 index 0debd49..2d379ce 100644 --- a/share/man/man5/autofs.5 +++ b/share/man/man5/autofs.5 @@ -40,8 +40,8 @@ The auto file system, or provides a method to dynamically graft mountpoints into the file system namespace. .Sh SEE ALSO +.Xr libautofs 3 , .Xr mount_autofs 8 -.Xr libautofs 3 .Sh HISTORY The .Nm diff --git a/share/man/man5/elf.5 b/share/man/man5/elf.5 index a407c3f..8241200 100644 --- a/share/man/man5/elf.5 +++ b/share/man/man5/elf.5 @@ -832,7 +832,7 @@ fixed-size entries. Various sections hold program and control information: .Bl -tag -width ".shstrtab" -compact .It .bss -Block Started by Symbol - +(Block Started by Symbol) This section holds uninitialized data that contributes to the program's memory image. By definition, the system initializes the data with zeros diff --git a/share/man/man7/release.7 b/share/man/man7/release.7 index 5868d4f..651c18c 100644 --- a/share/man/man7/release.7 +++ b/share/man/man7/release.7 @@ -24,7 +24,7 @@ .\" .\" $FreeBSD$ .\" -.Dd September 6, 2004 +.Dd May 17, 2005 .Dt RELEASE 7 .Os .Sh NAME @@ -166,12 +166,12 @@ staging directory. Sets up a suitable area for FTP installations in .Pa ${CHROOTDIR}/R/ftp . .It Cm cdrom.1 -Create the layout for the live filesystem CD-ROM image in +Create the layout for the live file system CD-ROM image in .Pa ${CHROOTDIR}/R/cdrom . .It Cm cdrom.2 Create the layout for the first and second CD-ROM images. .It Cm cdrom.3 -Create the layout for the boot only CD-ROM image and the boot only UFS +Create the layout for the boot-only CD-ROM image and the boot-only UFS miniroot image. .It Cm iso.1 Builds ISO images (installation and @@ -373,7 +373,7 @@ of the CVS tree (a .Dq "-CURRENT snapshot" ) . .It Va SEPARATE_LIVEFS -Store the live filesystem on its own CD-ROM image rather than placing it on +Store the live file system on its own CD-ROM image rather than placing it on the first disc. .It Va TARGET_ARCH The target machine processor architecture. diff --git a/share/man/man9/MUTEX_PROFILING.9 b/share/man/man9/MUTEX_PROFILING.9 index 7f8baf2..3538bfe 100644 --- a/share/man/man9/MUTEX_PROFILING.9 +++ b/share/man/man9/MUTEX_PROFILING.9 @@ -186,5 +186,4 @@ due to extra locking that occurs when .Dv INVARIANTS is present; likewise, using it in combination with .Dv WITNESS -with will lead to much higher lock hold times and contention in profiling output. diff --git a/share/man/man9/VFS_SYNC.9 b/share/man/man9/VFS_SYNC.9 index 24733094..fc77f80 100644 --- a/share/man/man9/VFS_SYNC.9 +++ b/share/man/man9/VFS_SYNC.9 @@ -71,7 +71,7 @@ The .Fn VFS_SYNC macro calls the .Va vfs_sync -method of the filesystem, which normally calls +method of the file system, which normally calls .Xr VOP_FSYNC 9 for all the vnodes in the file system. .Sh SEE ALSO diff --git a/share/man/man9/VFS_VGET.9 b/share/man/man9/VFS_VGET.9 index ae545e6..02b5536 100644 --- a/share/man/man9/VFS_VGET.9 +++ b/share/man/man9/VFS_VGET.9 @@ -48,20 +48,20 @@ looks up or creates a vnode from a (mount, inode#) tupple. Its arguments are: .Bl -tag -width ".Fa flags" .It Fa mp -The mountpoint. +The mount point. .It Fa ino The inode representing the file. -This is a unique number assigned by the filesystem when vnodes are first +This is a unique number assigned by the file system when vnodes are first created. .It Fa flags Additional locking flags to pass through to -.Xr vget 9 +.Xr vget 9 . .It Fa vpp Return parameter for the vnode. .El .Pp This is an optional file system entry-point for file systems mainly -intended for NFS server use, but many filesystems +intended for NFS server use, but many file systems use it internally in .Xr VOP_LOOKUP 9 and similar. @@ -69,7 +69,11 @@ and similar. If the file system does not support this call, then it should return .Er EOPNOTSUPP . .Pp -Please see sys/ufs/ffs/ffs_vfsops.c::ffs_vget() for the canonical example. +Please see +.Fn ffs_vget +in +.Pa sys/ufs/ffs/ffs_vfsops.c +for the canonical example. .Sh SEE ALSO .Xr VFS 9 , .Xr vget 9 , diff --git a/share/man/man9/VOP_GETPAGES.9 b/share/man/man9/VOP_GETPAGES.9 index e019c5e..ffac609 100644 --- a/share/man/man9/VOP_GETPAGES.9 +++ b/share/man/man9/VOP_GETPAGES.9 @@ -108,7 +108,7 @@ in addition to calling .Xr vm_page_undirty 9 . .It Dv VM_PAGER_BAD The page was entirely beyond the end of the backing file. -This condition should not be possible if the vnode's filesystem +This condition should not be possible if the vnode's file system is correctly implemented. .It Dv VM_PAGER_ERROR The page could not be written because of an error on the underlying storage diff --git a/share/man/man9/bus_dma.9 b/share/man/man9/bus_dma.9 index ea7f64a..ceab454 100644 --- a/share/man/man9/bus_dma.9 +++ b/share/man/man9/bus_dma.9 @@ -563,8 +563,8 @@ DMA tag. .It Fn bus_dmamap_load_mbuf_sg "dmat" "map" "mbuf" "segs" "nsegs" "flags" This is just like .Fn bus_dmamap_load_mbuf -except that it returns immediately without calling a callback function. It is -provided for efficiency. +except that it returns immediately without calling a callback function. +It is provided for efficiency. The scatter/gather segment array .Va segs is provided by the caller and filled in directly by the function. diff --git a/share/man/man9/device_find_child.9 b/share/man/man9/device_find_child.9 index 35b6c6c..a23b2b2 100644 --- a/share/man/man9/device_find_child.9 +++ b/share/man/man9/device_find_child.9 @@ -48,11 +48,11 @@ and .Fa unit . If .Fa unit -is -1, it returns the first child of -.Dv dev +is \-1, it returns the first child of +.Fa dev with a matching .Fa classname -(that is, the one with the lowest unit.) +(that is, the one with the lowest unit). .Sh RETURN VALUES If it exists, the child device is returned, otherwise NULL. .Sh SEE ALSO diff --git a/share/man/man9/ifnet.9 b/share/man/man9/ifnet.9 index c79d318..569e394 100644 --- a/share/man/man9/ifnet.9 +++ b/share/man/man9/ifnet.9 @@ -28,7 +28,7 @@ .\" .\" $FreeBSD$ .\" -.Dd June 8, 2004 +.Dd June 10, 2005 .Os .Dt IFNET 9 .Sh NAME @@ -1004,8 +1004,8 @@ A reference count of requests for this particular membership. .Ss Interface Manipulation Functions .Bl -ohang -offset indent .It Fn if_alloc -Allocate and initialize an -.Fa ifp . +Allocate and initialize +.Vt "struct ifnet" . Initalization includes the allocation of an interface index and may include the allocation of a .Fa type @@ -1040,7 +1040,7 @@ Identical to .Fn if_free except that the given .Fa type -is used to free +is used to free .Va if_l2com instead of the type in .Va if_type . diff --git a/share/man/man9/kthread.9 b/share/man/man9/kthread.9 index 69311c6..0dd7705 100644 --- a/share/man/man9/kthread.9 +++ b/share/man/man9/kthread.9 @@ -263,8 +263,8 @@ flag was specified in the parameter. .El .Sh SEE ALSO -.Xr exit1 9 , .Xr rfork 2 , +.Xr exit1 9 , .Xr SYSINIT 9 , .Xr wakeup 9 .Sh HISTORY diff --git a/share/man/man9/ktr.9 b/share/man/man9/ktr.9 index 498b58c..43b58ae 100644 --- a/share/man/man9/ktr.9 +++ b/share/man/man9/ktr.9 @@ -110,7 +110,7 @@ the console in addition to the event buffer. This example demonstrates the use of tracepoints at the .Dv KTR_PROC logging level. -.Bd -literal -compact +.Bd -literal void mi_switch() { diff --git a/share/man/man9/mbuf.9 b/share/man/man9/mbuf.9 index e606232..b13d8b7 100644 --- a/share/man/man9/mbuf.9 +++ b/share/man/man9/mbuf.9 @@ -627,7 +627,7 @@ bytes into the mbuf. The .Fa dstoff argument aligns the data and leaves room for a link layer header. -Return the new +Returns the new .Vt mbuf chain on success, and frees the diff --git a/share/man/man9/pci.9 b/share/man/man9/pci.9 index bb1dadb..0c171d8 100644 --- a/share/man/man9/pci.9 +++ b/share/man/man9/pci.9 @@ -244,7 +244,7 @@ space on the target architecture. This man page was written by .An Bruce M Simpson Aq bms@FreeBSD.org . .Sh BUGS -The kernel PCI code has a number of references to +The kernel PCI code has a number of references to .Dq "slot numbers" . These do not refer to the geographic location of PCI devices, but to the device number assigned by the combination of the PCI IDSEL diff --git a/share/man/man9/rman.9 b/share/man/man9/rman.9 index a892415..079c853 100644 --- a/share/man/man9/rman.9 +++ b/share/man/man9/rman.9 @@ -25,7 +25,7 @@ .\" .\" $FreeBSD$ .\" -.Dd May 12, 2003 +.Dd March 15, 2005 .Dt RMAN 9 .Os .Sh NAME @@ -187,15 +187,15 @@ and .Fa end of an acceptable range, as well as alignment, and the code will attempt to find a free segment which fits. -The +The .Fa start argument is the lowest acceptable starting value of the resource. The .Fa end argument is the highest acceptable ending value of the resource. Therefore, -.Fa start + count - 1 -must be <= +.Fa start No + Fa count No \- 1 +must be \[<=] .Fa end for any allocation to happen. The default behavior is to allocate an exclusive segment, unless the diff --git a/share/man/man9/taskqueue.9 b/share/man/man9/taskqueue.9 index 06be3a3..a985457 100644 --- a/share/man/man9/taskqueue.9 +++ b/share/man/man9/taskqueue.9 @@ -161,7 +161,7 @@ and the value of .Va ta_pending as its second argument. .Pp -The +The .Fn taskqueue_drain function is used to wait for the task to finish. There is no guarantee that the task will not be diff --git a/share/man/man9/time.9 b/share/man/man9/time.9 index 091f72e..90271fe 100644 --- a/share/man/man9/time.9 +++ b/share/man/man9/time.9 @@ -88,14 +88,14 @@ variable may be read and written without special precautions. .Xr clock_settime 2 , .Xr ntp_adjtime 2 , .Xr settimeofday 2 , +.Xr bintime 9 , +.Xr binuptime 9 , .Xr getbintime 9 , .Xr getbinuptime 9 , .Xr getmicrotime 9 , .Xr getmicrouptime 9 , .Xr getnanotime 9 , .Xr getnanouptime 9 , -.Xr bintime 9 , -.Xr binuptime 9 , .Xr microtime 9 , .Xr microuptime 9 , .Xr nanotime 9 , diff --git a/share/man/man9/timeout.9 b/share/man/man9/timeout.9 index fa4c5b9..1589aed 100644 --- a/share/man/man9/timeout.9 +++ b/share/man/man9/timeout.9 @@ -218,7 +218,7 @@ function returns. The following .Fa flags may be specified: -.Bl -tag -width CALLOUT_RETURNUNLOCKED +.Bl -tag -width ".Dv CALLOUT_RETURNUNLOCKED" .It Dv CALLOUT_RETURNUNLOCKED The callout function will release .Fa mtx diff --git a/share/man/man9/vfs_suser.9 b/share/man/man9/vfs_suser.9 index 17a61d6..749557a 100644 --- a/share/man/man9/vfs_suser.9 +++ b/share/man/man9/vfs_suser.9 @@ -41,7 +41,7 @@ The .Fn vfs_suser function checks if the credentials given include superuser powers -for the given mountpoint. +for the given mount point. It will check to see if the thread passed in has the same credentials as the user that mounted the file system. |