diff options
Diffstat (limited to '20130123/parse.c')
| -rw-r--r-- | 20130123/parse.c | 3122 |
1 files changed, 3122 insertions, 0 deletions
diff --git a/20130123/parse.c b/20130123/parse.c new file mode 100644 index 0000000..0b18f5d --- /dev/null +++ b/20130123/parse.c @@ -0,0 +1,3122 @@ +/* $NetBSD: parse.c,v 1.185 2012/06/12 19:21:51 joerg Exp $ */ + +/* + * Copyright (c) 1988, 1989, 1990, 1993 + * The Regents of the University of California. All rights reserved. + * + * This code is derived from software contributed to Berkeley by + * Adam de Boor. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +/* + * Copyright (c) 1989 by Berkeley Softworks + * All rights reserved. + * + * This code is derived from software contributed to Berkeley by + * Adam de Boor. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#ifndef MAKE_NATIVE +static char rcsid[] = "$NetBSD: parse.c,v 1.185 2012/06/12 19:21:51 joerg Exp $"; +#else +#include <sys/cdefs.h> +#ifndef lint +#if 0 +static char sccsid[] = "@(#)parse.c 8.3 (Berkeley) 3/19/94"; +#else +__RCSID("$NetBSD: parse.c,v 1.185 2012/06/12 19:21:51 joerg Exp $"); +#endif +#endif /* not lint */ +#endif + +/*- + * parse.c -- + * Functions to parse a makefile. + * + * One function, Parse_Init, must be called before any functions + * in this module are used. After that, the function Parse_File is the + * main entry point and controls most of the other functions in this + * module. + * + * Most important structures are kept in Lsts. Directories for + * the .include "..." function are kept in the 'parseIncPath' Lst, while + * those for the .include <...> are kept in the 'sysIncPath' Lst. The + * targets currently being defined are kept in the 'targets' Lst. + * + * The variables 'fname' and 'lineno' are used to track the name + * of the current file and the line number in that file so that error + * messages can be more meaningful. + * + * Interface: + * Parse_Init Initialization function which must be + * called before anything else in this module + * is used. + * + * Parse_End Cleanup the module + * + * Parse_File Function used to parse a makefile. It must + * be given the name of the file, which should + * already have been opened, and a function + * to call to read a character from the file. + * + * Parse_IsVar Returns TRUE if the given line is a + * variable assignment. Used by MainParseArgs + * to determine if an argument is a target + * or a variable assignment. Used internally + * for pretty much the same thing... + * + * Parse_Error Function called when an error occurs in + * parsing. Used by the variable and + * conditional modules. + * Parse_MainName Returns a Lst of the main target to create. + */ + +#include <sys/types.h> +#include <sys/stat.h> +#include <assert.h> +#include <ctype.h> +#include <errno.h> +#include <fcntl.h> +#include <stdarg.h> +#include <stdio.h> + +#include "make.h" +#include "hash.h" +#include "dir.h" +#include "job.h" +#include "buf.h" +#include "pathnames.h" + +#ifdef HAVE_MMAP +#include <sys/mman.h> + +#ifndef MAP_COPY +#define MAP_COPY MAP_PRIVATE +#endif +#ifndef MAP_FILE +#define MAP_FILE 0 +#endif +#endif + +//////////////////////////////////////////////////////////// +// types and constants + +/* + * Structure for a file being read ("included file") + */ +typedef struct IFile { + const char *fname; /* name of file */ + int lineno; /* current line number in file */ + int first_lineno; /* line number of start of text */ + int cond_depth; /* 'if' nesting when file opened */ + char *P_str; /* point to base of string buffer */ + char *P_ptr; /* point to next char of string buffer */ + char *P_end; /* point to the end of string buffer */ + char *(*nextbuf)(void *, size_t *); /* Function to get more data */ + void *nextbuf_arg; /* Opaque arg for nextbuf() */ + struct loadedfile *lf; /* loadedfile object, if any */ +} IFile; + + +/* + * These values are returned by ParseEOF to tell Parse_File whether to + * CONTINUE parsing, i.e. it had only reached the end of an include file, + * or if it's DONE. + */ +#define CONTINUE 1 +#define DONE 0 + +/* + * Tokens for target attributes + */ +typedef enum { + Begin, /* .BEGIN */ + Default, /* .DEFAULT */ + End, /* .END */ + dotError, /* .ERROR */ + Ignore, /* .IGNORE */ + Includes, /* .INCLUDES */ + Interrupt, /* .INTERRUPT */ + Libs, /* .LIBS */ + Meta, /* .META */ + MFlags, /* .MFLAGS or .MAKEFLAGS */ + Main, /* .MAIN and we don't have anything user-specified to + * make */ + NoExport, /* .NOEXPORT */ + NoMeta, /* .NOMETA */ + NoMetaCmp, /* .NOMETA_CMP */ + NoPath, /* .NOPATH */ + Not, /* Not special */ + NotParallel, /* .NOTPARALLEL */ + Null, /* .NULL */ + ExObjdir, /* .OBJDIR */ + Order, /* .ORDER */ + Parallel, /* .PARALLEL */ + ExPath, /* .PATH */ + Phony, /* .PHONY */ +#ifdef POSIX + Posix, /* .POSIX */ +#endif + Precious, /* .PRECIOUS */ + ExShell, /* .SHELL */ + Silent, /* .SILENT */ + SingleShell, /* .SINGLESHELL */ + Suffixes, /* .SUFFIXES */ + Wait, /* .WAIT */ + Attribute /* Generic attribute */ +} ParseSpecial; + +/* + * Other tokens + */ +#define LPAREN '(' +#define RPAREN ')' + + +//////////////////////////////////////////////////////////// +// result data + +/* + * The main target to create. This is the first target on the first + * dependency line in the first makefile. + */ +static GNode *mainNode; + +//////////////////////////////////////////////////////////// +// eval state + +/* targets we're working on */ +static Lst targets; + +#ifdef CLEANUP +/* command lines for targets */ +static Lst targCmds; +#endif + +/* + * specType contains the SPECial TYPE of the current target. It is + * Not if the target is unspecial. If it *is* special, however, the children + * are linked as children of the parent but not vice versa. This variable is + * set in ParseDoDependency + */ +static ParseSpecial specType; + +/* + * Predecessor node for handling .ORDER. Initialized to NULL when .ORDER + * seen, then set to each successive source on the line. + */ +static GNode *predecessor; + +//////////////////////////////////////////////////////////// +// parser state + +/* true if currently in a dependency line or its commands */ +static Boolean inLine; + +/* number of fatal errors */ +static int fatals = 0; + +/* + * Variables for doing includes + */ + +/* current file being read */ +static IFile *curFile; + +/* stack of IFiles generated by .includes */ +static Lst includes; + +/* include paths (lists of directories) */ +Lst parseIncPath; /* dirs for "..." includes */ +Lst sysIncPath; /* dirs for <...> includes */ +Lst defIncPath; /* default for sysIncPath */ + +//////////////////////////////////////////////////////////// +// parser tables + +/* + * The parseKeywords table is searched using binary search when deciding + * if a target or source is special. The 'spec' field is the ParseSpecial + * type of the keyword ("Not" if the keyword isn't special as a target) while + * the 'op' field is the operator to apply to the list of targets if the + * keyword is used as a source ("0" if the keyword isn't special as a source) + */ +static const struct { + const char *name; /* Name of keyword */ + ParseSpecial spec; /* Type when used as a target */ + int op; /* Operator when used as a source */ +} parseKeywords[] = { +{ ".BEGIN", Begin, 0 }, +{ ".DEFAULT", Default, 0 }, +{ ".END", End, 0 }, +{ ".ERROR", dotError, 0 }, +{ ".EXEC", Attribute, OP_EXEC }, +{ ".IGNORE", Ignore, OP_IGNORE }, +{ ".INCLUDES", Includes, 0 }, +{ ".INTERRUPT", Interrupt, 0 }, +{ ".INVISIBLE", Attribute, OP_INVISIBLE }, +{ ".JOIN", Attribute, OP_JOIN }, +{ ".LIBS", Libs, 0 }, +{ ".MADE", Attribute, OP_MADE }, +{ ".MAIN", Main, 0 }, +{ ".MAKE", Attribute, OP_MAKE }, +{ ".MAKEFLAGS", MFlags, 0 }, +{ ".META", Meta, OP_META }, +{ ".MFLAGS", MFlags, 0 }, +{ ".NOMETA", NoMeta, OP_NOMETA }, +{ ".NOMETA_CMP", NoMetaCmp, OP_NOMETA_CMP }, +{ ".NOPATH", NoPath, OP_NOPATH }, +{ ".NOTMAIN", Attribute, OP_NOTMAIN }, +{ ".NOTPARALLEL", NotParallel, 0 }, +{ ".NO_PARALLEL", NotParallel, 0 }, +{ ".NULL", Null, 0 }, +{ ".OBJDIR", ExObjdir, 0 }, +{ ".OPTIONAL", Attribute, OP_OPTIONAL }, +{ ".ORDER", Order, 0 }, +{ ".PARALLEL", Parallel, 0 }, +{ ".PATH", ExPath, 0 }, +{ ".PHONY", Phony, OP_PHONY }, +#ifdef POSIX +{ ".POSIX", Posix, 0 }, +#endif +{ ".PRECIOUS", Precious, OP_PRECIOUS }, +{ ".RECURSIVE", Attribute, OP_MAKE }, +{ ".SHELL", ExShell, 0 }, +{ ".SILENT", Silent, OP_SILENT }, +{ ".SINGLESHELL", SingleShell, 0 }, +{ ".SUFFIXES", Suffixes, 0 }, +{ ".USE", Attribute, OP_USE }, +{ ".USEBEFORE", Attribute, OP_USEBEFORE }, +{ ".WAIT", Wait, 0 }, +}; + +//////////////////////////////////////////////////////////// +// local functions + +static int ParseIsEscaped(const char *, const char *); +static void ParseErrorInternal(const char *, size_t, int, const char *, ...) + MAKE_ATTR_PRINTFLIKE(4,5); +static void ParseVErrorInternal(FILE *, const char *, size_t, int, const char *, va_list) + MAKE_ATTR_PRINTFLIKE(5, 0); +static int ParseFindKeyword(const char *); +static int ParseLinkSrc(void *, void *); +static int ParseDoOp(void *, void *); +static void ParseDoSrc(int, const char *); +static int ParseFindMain(void *, void *); +static int ParseAddDir(void *, void *); +static int ParseClearPath(void *, void *); +static void ParseDoDependency(char *); +static int ParseAddCmd(void *, void *); +static void ParseHasCommands(void *); +static void ParseDoInclude(char *); +static void ParseSetParseFile(const char *); +#ifdef SYSVINCLUDE +static void ParseTraditionalInclude(char *); +#endif +#ifdef GMAKEEXPORT +static void ParseGmakeExport(char *); +#endif +static int ParseEOF(void); +static char *ParseReadLine(void); +static void ParseFinishLine(void); +static void ParseMark(GNode *); + +//////////////////////////////////////////////////////////// +// file loader + +struct loadedfile { + const char *path; /* name, for error reports */ + char *buf; /* contents buffer */ + size_t len; /* length of contents */ + size_t maplen; /* length of mmap area, or 0 */ + Boolean used; /* XXX: have we used the data yet */ +}; + +/* + * Constructor/destructor for loadedfile + */ +static struct loadedfile * +loadedfile_create(const char *path) +{ + struct loadedfile *lf; + + lf = bmake_malloc(sizeof(*lf)); + lf->path = (path == NULL ? "(stdin)" : path); + lf->buf = NULL; + lf->len = 0; + lf->maplen = 0; + lf->used = FALSE; + return lf; +} + +static void +loadedfile_destroy(struct loadedfile *lf) +{ + if (lf->buf != NULL) { + if (lf->maplen > 0) { +#ifdef HAVE_MMAP + munmap(lf->buf, lf->maplen); +#endif + } else { + free(lf->buf); + } + } + free(lf); +} + +/* + * nextbuf() operation for loadedfile, as needed by the weird and twisted + * logic below. Once that's cleaned up, we can get rid of lf->used... + */ +static char * +loadedfile_nextbuf(void *x, size_t *len) +{ + struct loadedfile *lf = x; + + if (lf->used) { + return NULL; + } + lf->used = TRUE; + *len = lf->len; + return lf->buf; +} + +/* + * Try to get the size of a file. + */ +static ReturnStatus +load_getsize(int fd, size_t *ret) +{ + struct stat st; + + if (fstat(fd, &st) < 0) { + return FAILURE; + } + + if (!S_ISREG(st.st_mode)) { + return FAILURE; + } + + /* + * st_size is an off_t, which is 64 bits signed; *ret is + * size_t, which might be 32 bits unsigned or 64 bits + * unsigned. Rather than being elaborate, just punt on + * files that are more than 2^31 bytes. We should never + * see a makefile that size in practice... + * + * While we're at it reject negative sizes too, just in case. + */ + if (st.st_size < 0 || st.st_size > 0x7fffffff) { + return FAILURE; + } + + *ret = (size_t) st.st_size; + return SUCCESS; +} + +/* + * Read in a file. + * + * Until the path search logic can be moved under here instead of + * being in the caller in another source file, we need to have the fd + * passed in already open. Bleh. + * + * If the path is NULL use stdin and (to insure against fd leaks) + * assert that the caller passed in -1. + */ +static struct loadedfile * +loadfile(const char *path, int fd) +{ + struct loadedfile *lf; +#ifdef HAVE_MMAP + long pagesize; +#endif + ssize_t result; + size_t bufpos; + + lf = loadedfile_create(path); + + if (path == NULL) { + assert(fd == -1); + fd = STDIN_FILENO; + } else { +#if 0 /* notyet */ + fd = open(path, O_RDONLY); + if (fd < 0) { + ... + Error("%s: %s", path, strerror(errno)); + exit(1); + } +#endif + } + +#ifdef HAVE_MMAP + if (load_getsize(fd, &lf->len) == SUCCESS) { + /* found a size, try mmap */ + pagesize = sysconf(_SC_PAGESIZE); + if (pagesize <= 0) { + pagesize = 0x1000; + } + /* round size up to a page */ + lf->maplen = pagesize * ((lf->len + pagesize - 1)/pagesize); + + /* + * XXX hack for dealing with empty files; remove when + * we're no longer limited by interfacing to the old + * logic elsewhere in this file. + */ + if (lf->maplen == 0) { + lf->maplen = pagesize; + } + + /* + * FUTURE: remove PROT_WRITE when the parser no longer + * needs to scribble on the input. + */ + lf->buf = mmap(NULL, lf->maplen, PROT_READ|PROT_WRITE, + MAP_FILE|MAP_COPY, fd, 0); + if (lf->buf != MAP_FAILED) { + /* succeeded */ + if (lf->len == lf->maplen && lf->buf[lf->len - 1] != '\n') { + char *b = malloc(lf->len + 1); + b[lf->len] = '\n'; + memcpy(b, lf->buf, lf->len++); + munmap(lf->buf, lf->maplen); + lf->maplen = 0; + lf->buf = b; + } + goto done; + } + } +#endif + /* cannot mmap; load the traditional way */ + + lf->maplen = 0; + lf->len = 1024; + lf->buf = bmake_malloc(lf->len); + + bufpos = 0; + while (1) { + assert(bufpos <= lf->len); + if (bufpos == lf->len) { + lf->len *= 2; + lf->buf = bmake_realloc(lf->buf, lf->len); + } + result = read(fd, lf->buf + bufpos, lf->len - bufpos); + if (result < 0) { + Error("%s: read error: %s", path, strerror(errno)); + exit(1); + } + if (result == 0) { + break; + } + bufpos += result; + } + assert(bufpos <= lf->len); + lf->len = bufpos; + + /* truncate malloc region to actual length (maybe not useful) */ + if (lf->len > 0) { + lf->buf = bmake_realloc(lf->buf, lf->len); + } + +#ifdef HAVE_MMAP +done: +#endif + if (path != NULL) { + close(fd); + } + return lf; +} + +//////////////////////////////////////////////////////////// +// old code + +/*- + *---------------------------------------------------------------------- + * ParseIsEscaped -- + * Check if the current character is escaped on the current line + * + * Results: + * 0 if the character is not backslash escaped, 1 otherwise + * + * Side Effects: + * None + *---------------------------------------------------------------------- + */ +static int +ParseIsEscaped(const char *line, const char *c) +{ + int active = 0; + for (;;) { + if (line == c) + return active; + if (*--c != '\\') + return active; + active = !active; + } +} + +/*- + *---------------------------------------------------------------------- + * ParseFindKeyword -- + * Look in the table of keywords for one matching the given string. + * + * Input: + * str String to find + * + * Results: + * The index of the keyword, or -1 if it isn't there. + * + * Side Effects: + * None + *---------------------------------------------------------------------- + */ +static int +ParseFindKeyword(const char *str) +{ + int start, end, cur; + int diff; + + start = 0; + end = (sizeof(parseKeywords)/sizeof(parseKeywords[0])) - 1; + + do { + cur = start + ((end - start) / 2); + diff = strcmp(str, parseKeywords[cur].name); + + if (diff == 0) { + return (cur); + } else if (diff < 0) { + end = cur - 1; + } else { + start = cur + 1; + } + } while (start <= end); + return (-1); +} + +/*- + * ParseVErrorInternal -- + * Error message abort function for parsing. Prints out the context + * of the error (line number and file) as well as the message with + * two optional arguments. + * + * Results: + * None + * + * Side Effects: + * "fatals" is incremented if the level is PARSE_FATAL. + */ +/* VARARGS */ +static void +ParseVErrorInternal(FILE *f, const char *cfname, size_t clineno, int type, + const char *fmt, va_list ap) +{ + static Boolean fatal_warning_error_printed = FALSE; + + (void)fprintf(f, "%s: ", progname); + + if (cfname != NULL) { + (void)fprintf(f, "\""); + if (*cfname != '/' && strcmp(cfname, "(stdin)") != 0) { + char *cp; + const char *dir; + + /* + * Nothing is more annoying than not knowing + * which Makefile is the culprit. + */ + dir = Var_Value(".PARSEDIR", VAR_GLOBAL, &cp); + if (dir == NULL || *dir == '\0' || + (*dir == '.' && dir[1] == '\0')) + dir = Var_Value(".CURDIR", VAR_GLOBAL, &cp); + if (dir == NULL) + dir = "."; + + (void)fprintf(f, "%s/%s", dir, cfname); + } else + (void)fprintf(f, "%s", cfname); + + (void)fprintf(f, "\" line %d: ", (int)clineno); + } + if (type == PARSE_WARNING) + (void)fprintf(f, "warning: "); + (void)vfprintf(f, fmt, ap); + (void)fprintf(f, "\n"); + (void)fflush(f); + if (type == PARSE_FATAL || parseWarnFatal) + fatals += 1; + if (parseWarnFatal && !fatal_warning_error_printed) { + Error("parsing warnings being treated as errors"); + fatal_warning_error_printed = TRUE; + } +} + +/*- + * ParseErrorInternal -- + * Error function + * + * Results: + * None + * + * Side Effects: + * None + */ +/* VARARGS */ +static void +ParseErrorInternal(const char *cfname, size_t clineno, int type, + const char *fmt, ...) +{ + va_list ap; + + va_start(ap, fmt); + (void)fflush(stdout); + ParseVErrorInternal(stderr, cfname, clineno, type, fmt, ap); + va_end(ap); + + if (debug_file != stderr && debug_file != stdout) { + va_start(ap, fmt); + ParseVErrorInternal(debug_file, cfname, clineno, type, fmt, ap); + va_end(ap); + } +} + +/*- + * Parse_Error -- + * External interface to ParseErrorInternal; uses the default filename + * Line number. + * + * Results: + * None + * + * Side Effects: + * None + */ +/* VARARGS */ +void +Parse_Error(int type, const char *fmt, ...) +{ + va_list ap; + const char *fname; + size_t lineno; + + if (curFile == NULL) { + fname = NULL; + lineno = 0; + } else { + fname = curFile->fname; + lineno = curFile->lineno; + } + + va_start(ap, fmt); + (void)fflush(stdout); + ParseVErrorInternal(stderr, fname, lineno, type, fmt, ap); + va_end(ap); + + if (debug_file != stderr && debug_file != stdout) { + va_start(ap, fmt); + ParseVErrorInternal(debug_file, fname, lineno, type, fmt, ap); + va_end(ap); + } +} + + +/* + * ParseMessage + * Parse a .info .warning or .error directive + * + * The input is the line minus the ".". We substitute + * variables, print the message and exit(1) (for .error) or just print + * a warning if the directive is malformed. + */ +static Boolean +ParseMessage(char *line) +{ + int mtype; + + switch(*line) { + case 'i': + mtype = 0; + break; + case 'w': + mtype = PARSE_WARNING; + break; + case 'e': + mtype = PARSE_FATAL; + break; + default: + Parse_Error(PARSE_WARNING, "invalid syntax: \".%s\"", line); + return FALSE; + } + + while (isalpha((u_char)*line)) + line++; + if (!isspace((u_char)*line)) + return FALSE; /* not for us */ + while (isspace((u_char)*line)) + line++; + + line = Var_Subst(NULL, line, VAR_CMD, 0); + Parse_Error(mtype, "%s", line); + free(line); + + if (mtype == PARSE_FATAL) { + /* Terminate immediately. */ + exit(1); + } + return TRUE; +} + +/*- + *--------------------------------------------------------------------- + * ParseLinkSrc -- + * Link the parent node to its new child. Used in a Lst_ForEach by + * ParseDoDependency. If the specType isn't 'Not', the parent + * isn't linked as a parent of the child. + * + * Input: + * pgnp The parent node + * cgpn The child node + * + * Results: + * Always = 0 + * + * Side Effects: + * New elements are added to the parents list of cgn and the + * children list of cgn. the unmade field of pgn is updated + * to reflect the additional child. + *--------------------------------------------------------------------- + */ +static int +ParseLinkSrc(void *pgnp, void *cgnp) +{ + GNode *pgn = (GNode *)pgnp; + GNode *cgn = (GNode *)cgnp; + + if ((pgn->type & OP_DOUBLEDEP) && !Lst_IsEmpty (pgn->cohorts)) + pgn = (GNode *)Lst_Datum(Lst_Last(pgn->cohorts)); + (void)Lst_AtEnd(pgn->children, cgn); + if (specType == Not) + (void)Lst_AtEnd(cgn->parents, pgn); + pgn->unmade += 1; + if (DEBUG(PARSE)) { + fprintf(debug_file, "# ParseLinkSrc: added child %s - %s\n", pgn->name, cgn->name); + Targ_PrintNode(pgn, 0); + Targ_PrintNode(cgn, 0); + } + return (0); +} + +/*- + *--------------------------------------------------------------------- + * ParseDoOp -- + * Apply the parsed operator to the given target node. Used in a + * Lst_ForEach call by ParseDoDependency once all targets have + * been found and their operator parsed. If the previous and new + * operators are incompatible, a major error is taken. + * + * Input: + * gnp The node to which the operator is to be applied + * opp The operator to apply + * + * Results: + * Always 0 + * + * Side Effects: + * The type field of the node is altered to reflect any new bits in + * the op. + *--------------------------------------------------------------------- + */ +static int +ParseDoOp(void *gnp, void *opp) +{ + GNode *gn = (GNode *)gnp; + int op = *(int *)opp; + /* + * If the dependency mask of the operator and the node don't match and + * the node has actually had an operator applied to it before, and + * the operator actually has some dependency information in it, complain. + */ + if (((op & OP_OPMASK) != (gn->type & OP_OPMASK)) && + !OP_NOP(gn->type) && !OP_NOP(op)) + { + Parse_Error(PARSE_FATAL, "Inconsistent operator for %s", gn->name); + return (1); + } + + if ((op == OP_DOUBLEDEP) && ((gn->type & OP_OPMASK) == OP_DOUBLEDEP)) { + /* + * If the node was the object of a :: operator, we need to create a + * new instance of it for the children and commands on this dependency + * line. The new instance is placed on the 'cohorts' list of the + * initial one (note the initial one is not on its own cohorts list) + * and the new instance is linked to all parents of the initial + * instance. + */ + GNode *cohort; + + /* + * Propagate copied bits to the initial node. They'll be propagated + * back to the rest of the cohorts later. + */ + gn->type |= op & ~OP_OPMASK; + + cohort = Targ_FindNode(gn->name, TARG_NOHASH); + /* + * Make the cohort invisible as well to avoid duplicating it into + * other variables. True, parents of this target won't tend to do + * anything with their local variables, but better safe than + * sorry. (I think this is pointless now, since the relevant list + * traversals will no longer see this node anyway. -mycroft) + */ + cohort->type = op | OP_INVISIBLE; + (void)Lst_AtEnd(gn->cohorts, cohort); + cohort->centurion = gn; + gn->unmade_cohorts += 1; + snprintf(cohort->cohort_num, sizeof cohort->cohort_num, "#%d", + gn->unmade_cohorts); + } else { + /* + * We don't want to nuke any previous flags (whatever they were) so we + * just OR the new operator into the old + */ + gn->type |= op; + } + + return (0); +} + +/*- + *--------------------------------------------------------------------- + * ParseDoSrc -- + * Given the name of a source, figure out if it is an attribute + * and apply it to the targets if it is. Else decide if there is + * some attribute which should be applied *to* the source because + * of some special target and apply it if so. Otherwise, make the + * source be a child of the targets in the list 'targets' + * + * Input: + * tOp operator (if any) from special targets + * src name of the source to handle + * + * Results: + * None + * + * Side Effects: + * Operator bits may be added to the list of targets or to the source. + * The targets may have a new source added to their lists of children. + *--------------------------------------------------------------------- + */ +static void +ParseDoSrc(int tOp, const char *src) +{ + GNode *gn = NULL; + static int wait_number = 0; + char wait_src[16]; + + if (*src == '.' && isupper ((unsigned char)src[1])) { + int keywd = ParseFindKeyword(src); + if (keywd != -1) { + int op = parseKeywords[keywd].op; + if (op != 0) { + Lst_ForEach(targets, ParseDoOp, &op); + return; + } + if (parseKeywords[keywd].spec == Wait) { + /* + * We add a .WAIT node in the dependency list. + * After any dynamic dependencies (and filename globbing) + * have happened, it is given a dependency on the each + * previous child back to and previous .WAIT node. + * The next child won't be scheduled until the .WAIT node + * is built. + * We give each .WAIT node a unique name (mainly for diag). + */ + snprintf(wait_src, sizeof wait_src, ".WAIT_%u", ++wait_number); + gn = Targ_FindNode(wait_src, TARG_NOHASH); + gn->type = OP_WAIT | OP_PHONY | OP_DEPENDS | OP_NOTMAIN; + Lst_ForEach(targets, ParseLinkSrc, gn); + return; + } + } + } + + switch (specType) { + case Main: + /* + * If we have noted the existence of a .MAIN, it means we need + * to add the sources of said target to the list of things + * to create. The string 'src' is likely to be free, so we + * must make a new copy of it. Note that this will only be + * invoked if the user didn't specify a target on the command + * line. This is to allow #ifmake's to succeed, or something... + */ + (void)Lst_AtEnd(create, bmake_strdup(src)); + /* + * Add the name to the .TARGETS variable as well, so the user can + * employ that, if desired. + */ + Var_Append(".TARGETS", src, VAR_GLOBAL); + return; + + case Order: + /* + * Create proper predecessor/successor links between the previous + * source and the current one. + */ + gn = Targ_FindNode(src, TARG_CREATE); + if (predecessor != NULL) { + (void)Lst_AtEnd(predecessor->order_succ, gn); + (void)Lst_AtEnd(gn->order_pred, predecessor); + if (DEBUG(PARSE)) { + fprintf(debug_file, "# ParseDoSrc: added Order dependency %s - %s\n", + predecessor->name, gn->name); + Targ_PrintNode(predecessor, 0); + Targ_PrintNode(gn, 0); + } + } + /* + * The current source now becomes the predecessor for the next one. + */ + predecessor = gn; + break; + + default: + /* + * If the source is not an attribute, we need to find/create + * a node for it. After that we can apply any operator to it + * from a special target or link it to its parents, as + * appropriate. + * + * In the case of a source that was the object of a :: operator, + * the attribute is applied to all of its instances (as kept in + * the 'cohorts' list of the node) or all the cohorts are linked + * to all the targets. + */ + + /* Find/create the 'src' node and attach to all targets */ + gn = Targ_FindNode(src, TARG_CREATE); + if (tOp) { + gn->type |= tOp; + } else { + Lst_ForEach(targets, ParseLinkSrc, gn); + } + break; + } +} + +/*- + *----------------------------------------------------------------------- + * ParseFindMain -- + * Find a real target in the list and set it to be the main one. + * Called by ParseDoDependency when a main target hasn't been found + * yet. + * + * Input: + * gnp Node to examine + * + * Results: + * 0 if main not found yet, 1 if it is. + * + * Side Effects: + * mainNode is changed and Targ_SetMain is called. + * + *----------------------------------------------------------------------- + */ +static int +ParseFindMain(void *gnp, void *dummy) +{ + GNode *gn = (GNode *)gnp; + if ((gn->type & OP_NOTARGET) == 0) { + mainNode = gn; + Targ_SetMain(gn); + return (dummy ? 1 : 1); + } else { + return (dummy ? 0 : 0); + } +} + +/*- + *----------------------------------------------------------------------- + * ParseAddDir -- + * Front-end for Dir_AddDir to make sure Lst_ForEach keeps going + * + * Results: + * === 0 + * + * Side Effects: + * See Dir_AddDir. + * + *----------------------------------------------------------------------- + */ +static int +ParseAddDir(void *path, void *name) +{ + (void)Dir_AddDir((Lst) path, (char *)name); + return(0); +} + +/*- + *----------------------------------------------------------------------- + * ParseClearPath -- + * Front-end for Dir_ClearPath to make sure Lst_ForEach keeps going + * + * Results: + * === 0 + * + * Side Effects: + * See Dir_ClearPath + * + *----------------------------------------------------------------------- + */ +static int +ParseClearPath(void *path, void *dummy) +{ + Dir_ClearPath((Lst) path); + return(dummy ? 0 : 0); +} + +/*- + *--------------------------------------------------------------------- + * ParseDoDependency -- + * Parse the dependency line in line. + * + * Input: + * line the line to parse + * + * Results: + * None + * + * Side Effects: + * The nodes of the sources are linked as children to the nodes of the + * targets. Some nodes may be created. + * + * We parse a dependency line by first extracting words from the line and + * finding nodes in the list of all targets with that name. This is done + * until a character is encountered which is an operator character. Currently + * these are only ! and :. At this point the operator is parsed and the + * pointer into the line advanced until the first source is encountered. + * The parsed operator is applied to each node in the 'targets' list, + * which is where the nodes found for the targets are kept, by means of + * the ParseDoOp function. + * The sources are read in much the same way as the targets were except + * that now they are expanded using the wildcarding scheme of the C-Shell + * and all instances of the resulting words in the list of all targets + * are found. Each of the resulting nodes is then linked to each of the + * targets as one of its children. + * Certain targets are handled specially. These are the ones detailed + * by the specType variable. + * The storing of transformation rules is also taken care of here. + * A target is recognized as a transformation rule by calling + * Suff_IsTransform. If it is a transformation rule, its node is gotten + * from the suffix module via Suff_AddTransform rather than the standard + * Targ_FindNode in the target module. + *--------------------------------------------------------------------- + */ +static void +ParseDoDependency(char *line) +{ + char *cp; /* our current position */ + GNode *gn = NULL; /* a general purpose temporary node */ + int op; /* the operator on the line */ + char savec; /* a place to save a character */ + Lst paths; /* List of search paths to alter when parsing + * a list of .PATH targets */ + int tOp; /* operator from special target */ + Lst sources; /* list of archive source names after + * expansion */ + Lst curTargs; /* list of target names to be found and added + * to the targets list */ + char *lstart = line; + + if (DEBUG(PARSE)) + fprintf(debug_file, "ParseDoDependency(%s)\n", line); + tOp = 0; + + specType = Not; + paths = NULL; + + curTargs = Lst_Init(FALSE); + + do { + for (cp = line; *cp && (ParseIsEscaped(lstart, cp) || + !(isspace((unsigned char)*cp) || + *cp == '!' || *cp == ':' || *cp == LPAREN)); + cp++) { + if (*cp == '$') { + /* + * Must be a dynamic source (would have been expanded + * otherwise), so call the Var module to parse the puppy + * so we can safely advance beyond it...There should be + * no errors in this, as they would have been discovered + * in the initial Var_Subst and we wouldn't be here. + */ + int length; + void *freeIt; + char *result; + + result = Var_Parse(cp, VAR_CMD, TRUE, &length, &freeIt); + if (freeIt) + free(freeIt); + cp += length-1; + } + } + + if (!ParseIsEscaped(lstart, cp) && *cp == LPAREN) { + /* + * Archives must be handled specially to make sure the OP_ARCHV + * flag is set in their 'type' field, for one thing, and because + * things like "archive(file1.o file2.o file3.o)" are permissible. + * Arch_ParseArchive will set 'line' to be the first non-blank + * after the archive-spec. It creates/finds nodes for the members + * and places them on the given list, returning SUCCESS if all + * went well and FAILURE if there was an error in the + * specification. On error, line should remain untouched. + */ + if (Arch_ParseArchive(&line, targets, VAR_CMD) != SUCCESS) { + Parse_Error(PARSE_FATAL, + "Error in archive specification: \"%s\"", line); + goto out; + } else { + continue; + } + } + savec = *cp; + + if (!*cp) { + /* + * Ending a dependency line without an operator is a Bozo + * no-no. As a heuristic, this is also often triggered by + * undetected conflicts from cvs/rcs merges. + */ + if ((strncmp(line, "<<<<<<", 6) == 0) || + (strncmp(line, "======", 6) == 0) || + (strncmp(line, ">>>>>>", 6) == 0)) + Parse_Error(PARSE_FATAL, + "Makefile appears to contain unresolved cvs/rcs/??? merge conflicts"); + else + Parse_Error(PARSE_FATAL, lstart[0] == '.' ? "Unknown directive" + : "Need an operator"); + goto out; + } + *cp = '\0'; + + /* + * Have a word in line. See if it's a special target and set + * specType to match it. + */ + if (*line == '.' && isupper ((unsigned char)line[1])) { + /* + * See if the target is a special target that must have it + * or its sources handled specially. + */ + int keywd = ParseFindKeyword(line); + if (keywd != -1) { + if (specType == ExPath && parseKeywords[keywd].spec != ExPath) { + Parse_Error(PARSE_FATAL, "Mismatched special targets"); + goto out; + } + + specType = parseKeywords[keywd].spec; + tOp = parseKeywords[keywd].op; + + /* + * Certain special targets have special semantics: + * .PATH Have to set the dirSearchPath + * variable too + * .MAIN Its sources are only used if + * nothing has been specified to + * create. + * .DEFAULT Need to create a node to hang + * commands on, but we don't want + * it in the graph, nor do we want + * it to be the Main Target, so we + * create it, set OP_NOTMAIN and + * add it to the list, setting + * DEFAULT to the new node for + * later use. We claim the node is + * A transformation rule to make + * life easier later, when we'll + * use Make_HandleUse to actually + * apply the .DEFAULT commands. + * .PHONY The list of targets + * .NOPATH Don't search for file in the path + * .BEGIN + * .END + * .ERROR + * .INTERRUPT Are not to be considered the + * main target. + * .NOTPARALLEL Make only one target at a time. + * .SINGLESHELL Create a shell for each command. + * .ORDER Must set initial predecessor to NULL + */ + switch (specType) { + case ExPath: + if (paths == NULL) { + paths = Lst_Init(FALSE); + } + (void)Lst_AtEnd(paths, dirSearchPath); + break; + case Main: + if (!Lst_IsEmpty(create)) { + specType = Not; + } + break; + case Begin: + case End: + case dotError: + case Interrupt: + gn = Targ_FindNode(line, TARG_CREATE); + gn->type |= OP_NOTMAIN|OP_SPECIAL; + (void)Lst_AtEnd(targets, gn); + break; + case Default: + gn = Targ_NewGN(".DEFAULT"); + gn->type |= (OP_NOTMAIN|OP_TRANSFORM); + (void)Lst_AtEnd(targets, gn); + DEFAULT = gn; + break; + case NotParallel: + maxJobs = 1; + break; + case SingleShell: + compatMake = TRUE; + break; + case Order: + predecessor = NULL; + break; + default: + break; + } + } else if (strncmp(line, ".PATH", 5) == 0) { + /* + * .PATH<suffix> has to be handled specially. + * Call on the suffix module to give us a path to + * modify. + */ + Lst path; + + specType = ExPath; + path = Suff_GetPath(&line[5]); + if (path == NULL) { + Parse_Error(PARSE_FATAL, + "Suffix '%s' not defined (yet)", + &line[5]); + goto out; + } else { + if (paths == NULL) { + paths = Lst_Init(FALSE); + } + (void)Lst_AtEnd(paths, path); + } + } + } + + /* + * Have word in line. Get or create its node and stick it at + * the end of the targets list + */ + if ((specType == Not) && (*line != '\0')) { + if (Dir_HasWildcards(line)) { + /* + * Targets are to be sought only in the current directory, + * so create an empty path for the thing. Note we need to + * use Dir_Destroy in the destruction of the path as the + * Dir module could have added a directory to the path... + */ + Lst emptyPath = Lst_Init(FALSE); + + Dir_Expand(line, emptyPath, curTargs); + + Lst_Destroy(emptyPath, Dir_Destroy); + } else { + /* + * No wildcards, but we want to avoid code duplication, + * so create a list with the word on it. + */ + (void)Lst_AtEnd(curTargs, line); + } + + while(!Lst_IsEmpty(curTargs)) { + char *targName = (char *)Lst_DeQueue(curTargs); + + if (!Suff_IsTransform (targName)) { + gn = Targ_FindNode(targName, TARG_CREATE); + } else { + gn = Suff_AddTransform(targName); + } + + (void)Lst_AtEnd(targets, gn); + } + } else if (specType == ExPath && *line != '.' && *line != '\0') { + Parse_Error(PARSE_WARNING, "Extra target (%s) ignored", line); + } + + *cp = savec; + /* + * If it is a special type and not .PATH, it's the only target we + * allow on this line... + */ + if (specType != Not && specType != ExPath) { + Boolean warning = FALSE; + + while (*cp && (ParseIsEscaped(lstart, cp) || + ((*cp != '!') && (*cp != ':')))) { + if (ParseIsEscaped(lstart, cp) || + (*cp != ' ' && *cp != '\t')) { + warning = TRUE; + } + cp++; + } + if (warning) { + Parse_Error(PARSE_WARNING, "Extra target ignored"); + } + } else { + while (*cp && isspace ((unsigned char)*cp)) { + cp++; + } + } + line = cp; + } while (*line && (ParseIsEscaped(lstart, line) || + ((*line != '!') && (*line != ':')))); + + /* + * Don't need the list of target names anymore... + */ + Lst_Destroy(curTargs, NULL); + curTargs = NULL; + + if (!Lst_IsEmpty(targets)) { + switch(specType) { + default: + Parse_Error(PARSE_WARNING, "Special and mundane targets don't mix. Mundane ones ignored"); + break; + case Default: + case Begin: + case End: + case dotError: + case Interrupt: + /* + * These four create nodes on which to hang commands, so + * targets shouldn't be empty... + */ + case Not: + /* + * Nothing special here -- targets can be empty if it wants. + */ + break; + } + } + + /* + * Have now parsed all the target names. Must parse the operator next. The + * result is left in op . + */ + if (*cp == '!') { + op = OP_FORCE; + } else if (*cp == ':') { + if (cp[1] == ':') { + op = OP_DOUBLEDEP; + cp++; + } else { + op = OP_DEPENDS; + } + } else { + Parse_Error(PARSE_FATAL, lstart[0] == '.' ? "Unknown directive" + : "Missing dependency operator"); + goto out; + } + + cp++; /* Advance beyond operator */ + + Lst_ForEach(targets, ParseDoOp, &op); + + /* + * Get to the first source + */ + while (*cp && isspace ((unsigned char)*cp)) { + cp++; + } + line = cp; + + /* + * Several special targets take different actions if present with no + * sources: + * a .SUFFIXES line with no sources clears out all old suffixes + * a .PRECIOUS line makes all targets precious + * a .IGNORE line ignores errors for all targets + * a .SILENT line creates silence when making all targets + * a .PATH removes all directories from the search path(s). + */ + if (!*line) { + switch (specType) { + case Suffixes: + Suff_ClearSuffixes(); + break; + case Precious: + allPrecious = TRUE; + break; + case Ignore: + ignoreErrors = TRUE; + break; + case Silent: + beSilent = TRUE; + break; + case ExPath: + Lst_ForEach(paths, ParseClearPath, NULL); + Dir_SetPATH(); + break; +#ifdef POSIX + case Posix: + Var_Set("%POSIX", "1003.2", VAR_GLOBAL, 0); + break; +#endif + default: + break; + } + } else if (specType == MFlags) { + /* + * Call on functions in main.c to deal with these arguments and + * set the initial character to a null-character so the loop to + * get sources won't get anything + */ + Main_ParseArgLine(line); + *line = '\0'; + } else if (specType == ExShell) { + if (Job_ParseShell(line) != SUCCESS) { + Parse_Error(PARSE_FATAL, "improper shell specification"); + goto out; + } + *line = '\0'; + } else if ((specType == NotParallel) || (specType == SingleShell)) { + *line = '\0'; + } + + /* + * NOW GO FOR THE SOURCES + */ + if ((specType == Suffixes) || (specType == ExPath) || + (specType == Includes) || (specType == Libs) || + (specType == Null) || (specType == ExObjdir)) + { + while (*line) { + /* + * If the target was one that doesn't take files as its sources + * but takes something like suffixes, we take each + * space-separated word on the line as a something and deal + * with it accordingly. + * + * If the target was .SUFFIXES, we take each source as a + * suffix and add it to the list of suffixes maintained by the + * Suff module. + * + * If the target was a .PATH, we add the source as a directory + * to search on the search path. + * + * If it was .INCLUDES, the source is taken to be the suffix of + * files which will be #included and whose search path should + * be present in the .INCLUDES variable. + * + * If it was .LIBS, the source is taken to be the suffix of + * files which are considered libraries and whose search path + * should be present in the .LIBS variable. + * + * If it was .NULL, the source is the suffix to use when a file + * has no valid suffix. + * + * If it was .OBJDIR, the source is a new definition for .OBJDIR, + * and will cause make to do a new chdir to that path. + */ + while (*cp && !isspace ((unsigned char)*cp)) { + cp++; + } + savec = *cp; + *cp = '\0'; + switch (specType) { + case Suffixes: + Suff_AddSuffix(line, &mainNode); + break; + case ExPath: + Lst_ForEach(paths, ParseAddDir, line); + break; + case Includes: + Suff_AddInclude(line); + break; + case Libs: + Suff_AddLib(line); + break; + case Null: + Suff_SetNull(line); + break; + case ExObjdir: + Main_SetObjdir(line); + break; + default: + break; + } + *cp = savec; + if (savec != '\0') { + cp++; + } + while (*cp && isspace ((unsigned char)*cp)) { + cp++; + } + line = cp; + } + if (paths) { + Lst_Destroy(paths, NULL); + } + if (specType == ExPath) + Dir_SetPATH(); + } else { + while (*line) { + /* + * The targets take real sources, so we must beware of archive + * specifications (i.e. things with left parentheses in them) + * and handle them accordingly. + */ + for (; *cp && !isspace ((unsigned char)*cp); cp++) { + if ((*cp == LPAREN) && (cp > line) && (cp[-1] != '$')) { + /* + * Only stop for a left parenthesis if it isn't at the + * start of a word (that'll be for variable changes + * later) and isn't preceded by a dollar sign (a dynamic + * source). + */ + break; + } + } + + if (*cp == LPAREN) { + sources = Lst_Init(FALSE); + if (Arch_ParseArchive(&line, sources, VAR_CMD) != SUCCESS) { + Parse_Error(PARSE_FATAL, + "Error in source archive spec \"%s\"", line); + goto out; + } + + while (!Lst_IsEmpty (sources)) { + gn = (GNode *)Lst_DeQueue(sources); + ParseDoSrc(tOp, gn->name); + } + Lst_Destroy(sources, NULL); + cp = line; + } else { + if (*cp) { + *cp = '\0'; + cp += 1; + } + + ParseDoSrc(tOp, line); + } + while (*cp && isspace ((unsigned char)*cp)) { + cp++; + } + line = cp; + } + } + + if (mainNode == NULL) { + /* + * If we have yet to decide on a main target to make, in the + * absence of any user input, we want the first target on + * the first dependency line that is actually a real target + * (i.e. isn't a .USE or .EXEC rule) to be made. + */ + Lst_ForEach(targets, ParseFindMain, NULL); + } + +out: + if (curTargs) + Lst_Destroy(curTargs, NULL); +} + +/*- + *--------------------------------------------------------------------- + * Parse_IsVar -- + * Return TRUE if the passed line is a variable assignment. A variable + * assignment consists of a single word followed by optional whitespace + * followed by either a += or an = operator. + * This function is used both by the Parse_File function and main when + * parsing the command-line arguments. + * + * Input: + * line the line to check + * + * Results: + * TRUE if it is. FALSE if it ain't + * + * Side Effects: + * none + *--------------------------------------------------------------------- + */ +Boolean +Parse_IsVar(char *line) +{ + Boolean wasSpace = FALSE; /* set TRUE if found a space */ + char ch; + int level = 0; +#define ISEQOPERATOR(c) \ + (((c) == '+') || ((c) == ':') || ((c) == '?') || ((c) == '!')) + + /* + * Skip to variable name + */ + for (;(*line == ' ') || (*line == '\t'); line++) + continue; + + /* Scan for one of the assignment operators outside a variable expansion */ + while ((ch = *line++) != 0) { + if (ch == '(' || ch == '{') { + level++; + continue; + } + if (ch == ')' || ch == '}') { + level--; + continue; + } + if (level != 0) + continue; + while (ch == ' ' || ch == '\t') { + ch = *line++; + wasSpace = TRUE; + } + if (ch == '=') + return TRUE; + if (*line == '=' && ISEQOPERATOR(ch)) + return TRUE; + if (wasSpace) + return FALSE; + } + + return FALSE; +} + +/*- + *--------------------------------------------------------------------- + * Parse_DoVar -- + * Take the variable assignment in the passed line and do it in the + * global context. + * + * Note: There is a lexical ambiguity with assignment modifier characters + * in variable names. This routine interprets the character before the = + * as a modifier. Therefore, an assignment like + * C++=/usr/bin/CC + * is interpreted as "C+ +=" instead of "C++ =". + * + * Input: + * line a line guaranteed to be a variable assignment. + * This reduces error checks + * ctxt Context in which to do the assignment + * + * Results: + * none + * + * Side Effects: + * the variable structure of the given variable name is altered in the + * global context. + *--------------------------------------------------------------------- + */ +void +Parse_DoVar(char *line, GNode *ctxt) +{ + char *cp; /* pointer into line */ + enum { + VAR_SUBST, VAR_APPEND, VAR_SHELL, VAR_NORMAL + } type; /* Type of assignment */ + char *opc; /* ptr to operator character to + * null-terminate the variable name */ + Boolean freeCp = FALSE; /* TRUE if cp needs to be freed, + * i.e. if any variable expansion was + * performed */ + int depth; + + /* + * Skip to variable name + */ + while ((*line == ' ') || (*line == '\t')) { + line++; + } + + /* + * Skip to operator character, nulling out whitespace as we go + * XXX Rather than counting () and {} we should look for $ and + * then expand the variable. + */ + for (depth = 0, cp = line + 1; depth != 0 || *cp != '='; cp++) { + if (*cp == '(' || *cp == '{') { + depth++; + continue; + } + if (*cp == ')' || *cp == '}') { + depth--; + continue; + } + if (depth == 0 && isspace ((unsigned char)*cp)) { + *cp = '\0'; + } + } + opc = cp-1; /* operator is the previous character */ + *cp++ = '\0'; /* nuke the = */ + + /* + * Check operator type + */ + switch (*opc) { + case '+': + type = VAR_APPEND; + *opc = '\0'; + break; + + case '?': + /* + * If the variable already has a value, we don't do anything. + */ + *opc = '\0'; + if (Var_Exists(line, ctxt)) { + return; + } else { + type = VAR_NORMAL; + } + break; + + case ':': + type = VAR_SUBST; + *opc = '\0'; + break; + + case '!': + type = VAR_SHELL; + *opc = '\0'; + break; + + default: +#ifdef SUNSHCMD + while (opc > line && *opc != ':') + opc--; + + if (strncmp(opc, ":sh", 3) == 0) { + type = VAR_SHELL; + *opc = '\0'; + break; + } +#endif + type = VAR_NORMAL; + break; + } + + while (isspace ((unsigned char)*cp)) { + cp++; + } + + if (type == VAR_APPEND) { + Var_Append(line, cp, ctxt); + } else if (type == VAR_SUBST) { + /* + * Allow variables in the old value to be undefined, but leave their + * invocation alone -- this is done by forcing oldVars to be false. + * XXX: This can cause recursive variables, but that's not hard to do, + * and this allows someone to do something like + * + * CFLAGS = $(.INCLUDES) + * CFLAGS := -I.. $(CFLAGS) + * + * And not get an error. + */ + Boolean oldOldVars = oldVars; + + oldVars = FALSE; + + /* + * make sure that we set the variable the first time to nothing + * so that it gets substituted! + */ + if (!Var_Exists(line, ctxt)) + Var_Set(line, "", ctxt, 0); + + cp = Var_Subst(NULL, cp, ctxt, FALSE); + oldVars = oldOldVars; + freeCp = TRUE; + + Var_Set(line, cp, ctxt, 0); + } else if (type == VAR_SHELL) { + char *res; + const char *error; + + if (strchr(cp, '$') != NULL) { + /* + * There's a dollar sign in the command, so perform variable + * expansion on the whole thing. The resulting string will need + * freeing when we're done, so set freeCmd to TRUE. + */ + cp = Var_Subst(NULL, cp, VAR_CMD, TRUE); + freeCp = TRUE; + } + + res = Cmd_Exec(cp, &error); + Var_Set(line, res, ctxt, 0); + free(res); + + if (error) + Parse_Error(PARSE_WARNING, error, cp); + } else { + /* + * Normal assignment -- just do it. + */ + Var_Set(line, cp, ctxt, 0); + } + if (strcmp(line, MAKEOVERRIDES) == 0) + Main_ExportMAKEFLAGS(FALSE); /* re-export MAKEFLAGS */ + else if (strcmp(line, ".CURDIR") == 0) { + /* + * Somone is being (too?) clever... + * Let's pretend they know what they are doing and + * re-initialize the 'cur' Path. + */ + Dir_InitCur(cp); + Dir_SetPATH(); + } else if (strcmp(line, MAKE_JOB_PREFIX) == 0) { + Job_SetPrefix(); + } else if (strcmp(line, MAKE_EXPORTED) == 0) { + Var_Export(cp, 0); + } + if (freeCp) + free(cp); +} + + +/*- + * ParseAddCmd -- + * Lst_ForEach function to add a command line to all targets + * + * Input: + * gnp the node to which the command is to be added + * cmd the command to add + * + * Results: + * Always 0 + * + * Side Effects: + * A new element is added to the commands list of the node. + */ +static int +ParseAddCmd(void *gnp, void *cmd) +{ + GNode *gn = (GNode *)gnp; + + /* Add to last (ie current) cohort for :: targets */ + if ((gn->type & OP_DOUBLEDEP) && !Lst_IsEmpty (gn->cohorts)) + gn = (GNode *)Lst_Datum(Lst_Last(gn->cohorts)); + + /* if target already supplied, ignore commands */ + if (!(gn->type & OP_HAS_COMMANDS)) { + (void)Lst_AtEnd(gn->commands, cmd); + ParseMark(gn); + } else { +#ifdef notyet + /* XXX: We cannot do this until we fix the tree */ + (void)Lst_AtEnd(gn->commands, cmd); + Parse_Error(PARSE_WARNING, + "overriding commands for target \"%s\"; " + "previous commands defined at %s: %d ignored", + gn->name, gn->fname, gn->lineno); +#else + Parse_Error(PARSE_WARNING, + "duplicate script for target \"%s\" ignored", + gn->name); + ParseErrorInternal(gn->fname, gn->lineno, PARSE_WARNING, + "using previous script for \"%s\" defined here", + gn->name); +#endif + } + return(0); +} + +/*- + *----------------------------------------------------------------------- + * ParseHasCommands -- + * Callback procedure for Parse_File when destroying the list of + * targets on the last dependency line. Marks a target as already + * having commands if it does, to keep from having shell commands + * on multiple dependency lines. + * + * Input: + * gnp Node to examine + * + * Results: + * None + * + * Side Effects: + * OP_HAS_COMMANDS may be set for the target. + * + *----------------------------------------------------------------------- + */ +static void +ParseHasCommands(void *gnp) +{ + GNode *gn = (GNode *)gnp; + if (!Lst_IsEmpty(gn->commands)) { + gn->type |= OP_HAS_COMMANDS; + } +} + +/*- + *----------------------------------------------------------------------- + * Parse_AddIncludeDir -- + * Add a directory to the path searched for included makefiles + * bracketed by double-quotes. Used by functions in main.c + * + * Input: + * dir The name of the directory to add + * + * Results: + * None. + * + * Side Effects: + * The directory is appended to the list. + * + *----------------------------------------------------------------------- + */ +void +Parse_AddIncludeDir(char *dir) +{ + (void)Dir_AddDir(parseIncPath, dir); +} + +/*- + *--------------------------------------------------------------------- + * ParseDoInclude -- + * Push to another file. + * + * The input is the line minus the `.'. A file spec is a string + * enclosed in <> or "". The former is looked for only in sysIncPath. + * The latter in . and the directories specified by -I command line + * options + * + * Results: + * None + * + * Side Effects: + * A structure is added to the includes Lst and readProc, lineno, + * fname and curFILE are altered for the new file + *--------------------------------------------------------------------- + */ + +static void +Parse_include_file(char *file, Boolean isSystem, int silent) +{ + struct loadedfile *lf; + char *fullname; /* full pathname of file */ + char *newName; + char *prefEnd, *incdir; + int fd; + int i; + + /* + * Now we know the file's name and its search path, we attempt to + * find the durn thing. A return of NULL indicates the file don't + * exist. + */ + fullname = file[0] == '/' ? bmake_strdup(file) : NULL; + + if (fullname == NULL && !isSystem) { + /* + * Include files contained in double-quotes are first searched for + * relative to the including file's location. We don't want to + * cd there, of course, so we just tack on the old file's + * leading path components and call Dir_FindFile to see if + * we can locate the beast. + */ + + incdir = bmake_strdup(curFile->fname); + prefEnd = strrchr(incdir, '/'); + if (prefEnd != NULL) { + *prefEnd = '\0'; + /* Now do lexical processing of leading "../" on the filename */ + for (i = 0; strncmp(file + i, "../", 3) == 0; i += 3) { + prefEnd = strrchr(incdir + 1, '/'); + if (prefEnd == NULL || strcmp(prefEnd, "/..") == 0) + break; + *prefEnd = '\0'; + } + newName = str_concat(incdir, file + i, STR_ADDSLASH); + fullname = Dir_FindFile(newName, parseIncPath); + if (fullname == NULL) + fullname = Dir_FindFile(newName, dirSearchPath); + free(newName); + } + free(incdir); + + if (fullname == NULL) { + /* + * Makefile wasn't found in same directory as included makefile. + * Search for it first on the -I search path, + * then on the .PATH search path, if not found in a -I directory. + * If we have a suffix specific path we should use that. + */ + char *suff; + Lst suffPath = NULL; + + if ((suff = strrchr(file, '.'))) { + suffPath = Suff_GetPath(suff); + if (suffPath != NULL) { + fullname = Dir_FindFile(file, suffPath); + } + } + if (fullname == NULL) { + fullname = Dir_FindFile(file, parseIncPath); + if (fullname == NULL) { + fullname = Dir_FindFile(file, dirSearchPath); + } + } + } + } + + /* Looking for a system file or file still not found */ + if (fullname == NULL) { + /* + * Look for it on the system path + */ + fullname = Dir_FindFile(file, + Lst_IsEmpty(sysIncPath) ? defIncPath : sysIncPath); + } + + if (fullname == NULL) { + if (!silent) + Parse_Error(PARSE_FATAL, "Could not find %s", file); + return; + } + + /* Actually open the file... */ + fd = open(fullname, O_RDONLY); + if (fd == -1) { + if (!silent) + Parse_Error(PARSE_FATAL, "Cannot open %s", fullname); + free(fullname); + return; + } + + /* load it */ + lf = loadfile(fullname, fd); + + /* Start reading from this file next */ + Parse_SetInput(fullname, 0, -1, loadedfile_nextbuf, lf); + curFile->lf = lf; +} + +static void +ParseDoInclude(char *line) +{ + char endc; /* the character which ends the file spec */ + char *cp; /* current position in file spec */ + int silent = (*line != 'i') ? 1 : 0; + char *file = &line[7 + silent]; + + /* Skip to delimiter character so we know where to look */ + while (*file == ' ' || *file == '\t') + file++; + + if (*file != '"' && *file != '<') { + Parse_Error(PARSE_FATAL, + ".include filename must be delimited by '\"' or '<'"); + return; + } + + /* + * Set the search path on which to find the include file based on the + * characters which bracket its name. Angle-brackets imply it's + * a system Makefile while double-quotes imply it's a user makefile + */ + if (*file == '<') { + endc = '>'; + } else { + endc = '"'; + } + + /* Skip to matching delimiter */ + for (cp = ++file; *cp && *cp != endc; cp++) + continue; + + if (*cp != endc) { + Parse_Error(PARSE_FATAL, + "Unclosed %cinclude filename. '%c' expected", + '.', endc); + return; + } + *cp = '\0'; + + /* + * Substitute for any variables in the file name before trying to + * find the thing. + */ + file = Var_Subst(NULL, file, VAR_CMD, FALSE); + + Parse_include_file(file, endc == '>', silent); + free(file); +} + + +/*- + *--------------------------------------------------------------------- + * ParseSetParseFile -- + * Set the .PARSEDIR and .PARSEFILE variables to the dirname and + * basename of the given filename + * + * Results: + * None + * + * Side Effects: + * The .PARSEDIR and .PARSEFILE variables are overwritten by the + * dirname and basename of the given filename. + *--------------------------------------------------------------------- + */ +static void +ParseSetParseFile(const char *filename) +{ + char *slash, *dirname; + const char *pd, *pf; + int len; + + slash = strrchr(filename, '/'); + if (slash == NULL) { + Var_Set(".PARSEDIR", pd = curdir, VAR_GLOBAL, 0); + Var_Set(".PARSEFILE", pf = filename, VAR_GLOBAL, 0); + dirname= NULL; + } else { + len = slash - filename; + dirname = bmake_malloc(len + 1); + memcpy(dirname, filename, len); + dirname[len] = '\0'; + Var_Set(".PARSEDIR", pd = dirname, VAR_GLOBAL, 0); + Var_Set(".PARSEFILE", pf = slash + 1, VAR_GLOBAL, 0); + } + if (DEBUG(PARSE)) + fprintf(debug_file, "ParseSetParseFile: ${.PARSEDIR} = `%s' " + "${.PARSEFILE} = `%s'\n", pd, pf); + free(dirname); +} + +/* + * Track the makefiles we read - so makefiles can + * set dependencies on them. + * Avoid adding anything more than once. + */ + +static void +ParseTrackInput(const char *name) +{ + char *old; + char *fp = NULL; + size_t name_len = strlen(name); + + old = Var_Value(MAKE_MAKEFILES, VAR_GLOBAL, &fp); + if (old) { + /* does it contain name? */ + for (; old != NULL; old = strchr(old, ' ')) { + if (*old == ' ') + old++; + if (memcmp(old, name, name_len) == 0 + && (old[name_len] == 0 || old[name_len] == ' ')) + goto cleanup; + } + } + Var_Append (MAKE_MAKEFILES, name, VAR_GLOBAL); + cleanup: + if (fp) { + free(fp); + } +} + + +/*- + *--------------------------------------------------------------------- + * Parse_setInput -- + * Start Parsing from the given source + * + * Results: + * None + * + * Side Effects: + * A structure is added to the includes Lst and readProc, lineno, + * fname and curFile are altered for the new file + *--------------------------------------------------------------------- + */ +void +Parse_SetInput(const char *name, int line, int fd, + char *(*nextbuf)(void *, size_t *), void *arg) +{ + char *buf; + size_t len; + + if (name == NULL) + name = curFile->fname; + else + ParseTrackInput(name); + + if (DEBUG(PARSE)) + fprintf(debug_file, "Parse_SetInput: file %s, line %d, fd %d, nextbuf %p, arg %p\n", + name, line, fd, nextbuf, arg); + + if (fd == -1 && nextbuf == NULL) + /* sanity */ + return; + + if (curFile != NULL) + /* Save exiting file info */ + Lst_AtFront(includes, curFile); + + /* Allocate and fill in new structure */ + curFile = bmake_malloc(sizeof *curFile); + + /* + * Once the previous state has been saved, we can get down to reading + * the new file. We set up the name of the file to be the absolute + * name of the include file so error messages refer to the right + * place. + */ + curFile->fname = name; + curFile->lineno = line; + curFile->first_lineno = line; + curFile->nextbuf = nextbuf; + curFile->nextbuf_arg = arg; + curFile->lf = NULL; + + assert(nextbuf != NULL); + + /* Get first block of input data */ + buf = curFile->nextbuf(curFile->nextbuf_arg, &len); + if (buf == NULL) { + /* Was all a waste of time ... */ + free(curFile); + return; + } + curFile->P_str = buf; + curFile->P_ptr = buf; + curFile->P_end = buf+len; + + curFile->cond_depth = Cond_save_depth(); + ParseSetParseFile(name); +} + +#ifdef SYSVINCLUDE +/*- + *--------------------------------------------------------------------- + * ParseTraditionalInclude -- + * Push to another file. + * + * The input is the current line. The file name(s) are + * following the "include". + * + * Results: + * None + * + * Side Effects: + * A structure is added to the includes Lst and readProc, lineno, + * fname and curFILE are altered for the new file + *--------------------------------------------------------------------- + */ +static void +ParseTraditionalInclude(char *line) +{ + char *cp; /* current position in file spec */ + int done = 0; + int silent = (line[0] != 'i') ? 1 : 0; + char *file = &line[silent + 7]; + char *all_files; + + if (DEBUG(PARSE)) { + fprintf(debug_file, "ParseTraditionalInclude: %s\n", file); + } + + /* + * Skip over whitespace + */ + while (isspace((unsigned char)*file)) + file++; + + /* + * Substitute for any variables in the file name before trying to + * find the thing. + */ + all_files = Var_Subst(NULL, file, VAR_CMD, FALSE); + + if (*file == '\0') { + Parse_Error(PARSE_FATAL, + "Filename missing from \"include\""); + return; + } + + for (file = all_files; !done; file = cp + 1) { + /* Skip to end of line or next whitespace */ + for (cp = file; *cp && !isspace((unsigned char) *cp); cp++) + continue; + + if (*cp) + *cp = '\0'; + else + done = 1; + + Parse_include_file(file, FALSE, silent); + } + free(all_files); +} +#endif + +#ifdef GMAKEEXPORT +/*- + *--------------------------------------------------------------------- + * ParseGmakeExport -- + * Parse export <variable>=<value> + * + * And set the environment with it. + * + * Results: + * None + * + * Side Effects: + * None + *--------------------------------------------------------------------- + */ +static void +ParseGmakeExport(char *line) +{ + char *variable = &line[6]; + char *value; + + if (DEBUG(PARSE)) { + fprintf(debug_file, "ParseGmakeExport: %s\n", variable); + } + + /* + * Skip over whitespace + */ + while (isspace((unsigned char)*variable)) + variable++; + + for (value = variable; *value && *value != '='; value++) + continue; + + if (*value != '=') { + Parse_Error(PARSE_FATAL, + "Variable/Value missing from \"export\""); + return; + } + + /* + * Expand the value before putting it in the environment. + */ + value = Var_Subst(NULL, value, VAR_CMD, FALSE); + setenv(variable, value, 1); +} +#endif + +/*- + *--------------------------------------------------------------------- + * ParseEOF -- + * Called when EOF is reached in the current file. If we were reading + * an include file, the includes stack is popped and things set up + * to go back to reading the previous file at the previous location. + * + * Results: + * CONTINUE if there's more to do. DONE if not. + * + * Side Effects: + * The old curFILE, is closed. The includes list is shortened. + * lineno, curFILE, and fname are changed if CONTINUE is returned. + *--------------------------------------------------------------------- + */ +static int +ParseEOF(void) +{ + char *ptr; + size_t len; + + assert(curFile->nextbuf != NULL); + + /* get next input buffer, if any */ + ptr = curFile->nextbuf(curFile->nextbuf_arg, &len); + curFile->P_ptr = ptr; + curFile->P_str = ptr; + curFile->P_end = ptr + len; + curFile->lineno = curFile->first_lineno; + if (ptr != NULL) { + /* Iterate again */ + return CONTINUE; + } + + /* Ensure the makefile (or loop) didn't have mismatched conditionals */ + Cond_restore_depth(curFile->cond_depth); + + if (curFile->lf != NULL) { + loadedfile_destroy(curFile->lf); + curFile->lf = NULL; + } + + /* Dispose of curFile info */ + /* Leak curFile->fname because all the gnodes have pointers to it */ + free(curFile->P_str); + free(curFile); + + curFile = Lst_DeQueue(includes); + + if (curFile == NULL) { + /* We've run out of input */ + Var_Delete(".PARSEDIR", VAR_GLOBAL); + Var_Delete(".PARSEFILE", VAR_GLOBAL); + return DONE; + } + + if (DEBUG(PARSE)) + fprintf(debug_file, "ParseEOF: returning to file %s, line %d\n", + curFile->fname, curFile->lineno); + + /* Restore the PARSEDIR/PARSEFILE variables */ + ParseSetParseFile(curFile->fname); + return (CONTINUE); +} + +#define PARSE_RAW 1 +#define PARSE_SKIP 2 + +static char * +ParseGetLine(int flags, int *length) +{ + IFile *cf = curFile; + char *ptr; + char ch; + char *line; + char *line_end; + char *escaped; + char *comment; + char *tp; + + /* Loop through blank lines and comment lines */ + for (;;) { + cf->lineno++; + line = cf->P_ptr; + ptr = line; + line_end = line; + escaped = NULL; + comment = NULL; + for (;;) { + if (cf->P_end != NULL && ptr == cf->P_end) { + /* end of buffer */ + ch = 0; + break; + } + ch = *ptr; + if (ch == 0 || (ch == '\\' && ptr[1] == 0)) { + if (cf->P_end == NULL) + /* End of string (aka for loop) data */ + break; + if (cf->nextbuf != NULL) { + /* + * End of this buffer; return EOF and outer logic + * will get the next one. (eww) + */ + break; + } + Parse_Error(PARSE_FATAL, "Zero byte read from file"); + return NULL; + } + + if (ch == '\\') { + /* Don't treat next character as special, remember first one */ + if (escaped == NULL) + escaped = ptr; + if (ptr[1] == '\n') + cf->lineno++; + ptr += 2; + line_end = ptr; + continue; + } + if (ch == '#' && comment == NULL) { + /* Remember first '#' for comment stripping */ + /* Unless previous char was '[', as in modifier :[#] */ + if (!(ptr > line && ptr[-1] == '[')) + comment = line_end; + } + ptr++; + if (ch == '\n') + break; + if (!isspace((unsigned char)ch)) + /* We are not interested in trailing whitespace */ + line_end = ptr; + } + + /* Save next 'to be processed' location */ + cf->P_ptr = ptr; + + /* Check we have a non-comment, non-blank line */ + if (line_end == line || comment == line) { + if (ch == 0) + /* At end of file */ + return NULL; + /* Parse another line */ + continue; + } + + /* We now have a line of data */ + *line_end = 0; + + if (flags & PARSE_RAW) { + /* Leave '\' (etc) in line buffer (eg 'for' lines) */ + *length = line_end - line; + return line; + } + + if (flags & PARSE_SKIP) { + /* Completely ignore non-directives */ + if (line[0] != '.') + continue; + /* We could do more of the .else/.elif/.endif checks here */ + } + break; + } + + /* Brutally ignore anything after a non-escaped '#' in non-commands */ + if (comment != NULL && line[0] != '\t') { + line_end = comment; + *line_end = 0; + } + + /* If we didn't see a '\\' then the in-situ data is fine */ + if (escaped == NULL) { + *length = line_end - line; + return line; + } + + /* Remove escapes from '\n' and '#' */ + tp = ptr = escaped; + escaped = line; + for (; ; *tp++ = ch) { + ch = *ptr++; + if (ch != '\\') { + if (ch == 0) + break; + continue; + } + + ch = *ptr++; + if (ch == 0) { + /* Delete '\\' at end of buffer */ + tp--; + break; + } + + if (ch == '#' && line[0] != '\t') + /* Delete '\\' from before '#' on non-command lines */ + continue; + + if (ch != '\n') { + /* Leave '\\' in buffer for later */ + *tp++ = '\\'; + /* Make sure we don't delete an escaped ' ' from the line end */ + escaped = tp + 1; + continue; + } + + /* Escaped '\n' replace following whitespace with a single ' ' */ + while (ptr[0] == ' ' || ptr[0] == '\t') + ptr++; + ch = ' '; + } + + /* Delete any trailing spaces - eg from empty continuations */ + while (tp > escaped && isspace((unsigned char)tp[-1])) + tp--; + + *tp = 0; + *length = tp - line; + return line; +} + +/*- + *--------------------------------------------------------------------- + * ParseReadLine -- + * Read an entire line from the input file. Called only by Parse_File. + * + * Results: + * A line w/o its newline + * + * Side Effects: + * Only those associated with reading a character + *--------------------------------------------------------------------- + */ +static char * +ParseReadLine(void) +{ + char *line; /* Result */ + int lineLength; /* Length of result */ + int lineno; /* Saved line # */ + int rval; + + for (;;) { + line = ParseGetLine(0, &lineLength); + if (line == NULL) + return NULL; + + if (line[0] != '.') + return line; + + /* + * The line might be a conditional. Ask the conditional module + * about it and act accordingly + */ + switch (Cond_Eval(line)) { + case COND_SKIP: + /* Skip to next conditional that evaluates to COND_PARSE. */ + do { + line = ParseGetLine(PARSE_SKIP, &lineLength); + } while (line && Cond_Eval(line) != COND_PARSE); + if (line == NULL) + break; + continue; + case COND_PARSE: + continue; + case COND_INVALID: /* Not a conditional line */ + /* Check for .for loops */ + rval = For_Eval(line); + if (rval == 0) + /* Not a .for line */ + break; + if (rval < 0) + /* Syntax error - error printed, ignore line */ + continue; + /* Start of a .for loop */ + lineno = curFile->lineno; + /* Accumulate loop lines until matching .endfor */ + do { + line = ParseGetLine(PARSE_RAW, &lineLength); + if (line == NULL) { + Parse_Error(PARSE_FATAL, + "Unexpected end of file in for loop."); + break; + } + } while (For_Accum(line)); + /* Stash each iteration as a new 'input file' */ + For_Run(lineno); + /* Read next line from for-loop buffer */ + continue; + } + return (line); + } +} + +/*- + *----------------------------------------------------------------------- + * ParseFinishLine -- + * Handle the end of a dependency group. + * + * Results: + * Nothing. + * + * Side Effects: + * inLine set FALSE. 'targets' list destroyed. + * + *----------------------------------------------------------------------- + */ +static void +ParseFinishLine(void) +{ + if (inLine) { + Lst_ForEach(targets, Suff_EndTransform, NULL); + Lst_Destroy(targets, ParseHasCommands); + targets = NULL; + inLine = FALSE; + } +} + + +/*- + *--------------------------------------------------------------------- + * Parse_File -- + * Parse a file into its component parts, incorporating it into the + * current dependency graph. This is the main function and controls + * almost every other function in this module + * + * Input: + * name the name of the file being read + * fd Open file to makefile to parse + * + * Results: + * None + * + * Side Effects: + * closes fd. + * Loads. Nodes are added to the list of all targets, nodes and links + * are added to the dependency graph. etc. etc. etc. + *--------------------------------------------------------------------- + */ +void +Parse_File(const char *name, int fd) +{ + char *cp; /* pointer into the line */ + char *line; /* the line we're working on */ + struct loadedfile *lf; + + lf = loadfile(name, fd); + + inLine = FALSE; + fatals = 0; + + if (name == NULL) { + name = "(stdin)"; + } + + Parse_SetInput(name, 0, -1, loadedfile_nextbuf, lf); + curFile->lf = lf; + + do { + for (; (line = ParseReadLine()) != NULL; ) { + if (DEBUG(PARSE)) + fprintf(debug_file, "ParseReadLine (%d): '%s'\n", + curFile->lineno, line); + if (*line == '.') { + /* + * Lines that begin with the special character may be + * include or undef directives. + * On the other hand they can be suffix rules (.c.o: ...) + * or just dependencies for filenames that start '.'. + */ + for (cp = line + 1; isspace((unsigned char)*cp); cp++) { + continue; + } + if (strncmp(cp, "include", 7) == 0 || + ((cp[0] == 's' || cp[0] == '-') && + strncmp(&cp[1], "include", 7) == 0)) { + ParseDoInclude(cp); + continue; + } + if (strncmp(cp, "undef", 5) == 0) { + char *cp2; + for (cp += 5; isspace((unsigned char) *cp); cp++) + continue; + for (cp2 = cp; !isspace((unsigned char) *cp2) && + (*cp2 != '\0'); cp2++) + continue; + *cp2 = '\0'; + Var_Delete(cp, VAR_GLOBAL); + continue; + } else if (strncmp(cp, "export", 6) == 0) { + for (cp += 6; isspace((unsigned char) *cp); cp++) + continue; + Var_Export(cp, 1); + continue; + } else if (strncmp(cp, "unexport", 8) == 0) { + Var_UnExport(cp); + continue; + } else if (strncmp(cp, "info", 4) == 0 || + strncmp(cp, "error", 5) == 0 || + strncmp(cp, "warning", 7) == 0) { + if (ParseMessage(cp)) + continue; + } + } + + if (*line == '\t') { + /* + * If a line starts with a tab, it can only hope to be + * a creation command. + */ + cp = line + 1; + shellCommand: + for (; isspace ((unsigned char)*cp); cp++) { + continue; + } + if (*cp) { + if (!inLine) + Parse_Error(PARSE_FATAL, + "Unassociated shell command \"%s\"", + cp); + /* + * So long as it's not a blank line and we're actually + * in a dependency spec, add the command to the list of + * commands of all targets in the dependency spec + */ + if (targets) { + cp = bmake_strdup(cp); + Lst_ForEach(targets, ParseAddCmd, cp); +#ifdef CLEANUP + Lst_AtEnd(targCmds, cp); +#endif + } + } + continue; + } + +#ifdef SYSVINCLUDE + if (((strncmp(line, "include", 7) == 0 && + isspace((unsigned char) line[7])) || + ((line[0] == 's' || line[0] == '-') && + strncmp(&line[1], "include", 7) == 0 && + isspace((unsigned char) line[8]))) && + strchr(line, ':') == NULL) { + /* + * It's an S3/S5-style "include". + */ + ParseTraditionalInclude(line); + continue; + } +#endif +#ifdef GMAKEEXPORT + if (strncmp(line, "export", 6) == 0 && + isspace((unsigned char) line[6]) && + strchr(line, ':') == NULL) { + /* + * It's a Gmake "export". + */ + ParseGmakeExport(line); + continue; + } +#endif + if (Parse_IsVar(line)) { + ParseFinishLine(); + Parse_DoVar(line, VAR_GLOBAL); + continue; + } + +#ifndef POSIX + /* + * To make life easier on novices, if the line is indented we + * first make sure the line has a dependency operator in it. + * If it doesn't have an operator and we're in a dependency + * line's script, we assume it's actually a shell command + * and add it to the current list of targets. + */ + cp = line; + if (isspace((unsigned char) line[0])) { + while ((*cp != '\0') && isspace((unsigned char) *cp)) + cp++; + while (*cp && (ParseIsEscaped(line, cp) || + (*cp != ':') && (*cp != '!'))) { + cp++; + } + if (*cp == '\0') { + if (inLine) { + Parse_Error(PARSE_WARNING, + "Shell command needs a leading tab"); + goto shellCommand; + } + } + } +#endif + ParseFinishLine(); + + /* + * For some reason - probably to make the parser impossible - + * a ';' can be used to separate commands from dependencies. + * Attempt to avoid ';' inside substitution patterns. + */ + { + int level = 0; + + for (cp = line; *cp != 0; cp++) { + if (*cp == '\\' && cp[1] != 0) { + cp++; + continue; + } + if (*cp == '$' && + (cp[1] == '(' || cp[1] == '{')) { + level++; + continue; + } + if (level > 0) { + if (*cp == ')' || *cp == '}') { + level--; + continue; + } + } else if (*cp == ';') { + break; + } + } + } + if (*cp != 0) + /* Terminate the dependency list at the ';' */ + *cp++ = 0; + else + cp = NULL; + + /* + * We now know it's a dependency line so it needs to have all + * variables expanded before being parsed. Tell the variable + * module to complain if some variable is undefined... + */ + line = Var_Subst(NULL, line, VAR_CMD, TRUE); + + /* + * Need a non-circular list for the target nodes + */ + if (targets) + Lst_Destroy(targets, NULL); + + targets = Lst_Init(FALSE); + inLine = TRUE; + + ParseDoDependency(line); + free(line); + + /* If there were commands after a ';', add them now */ + if (cp != NULL) { + goto shellCommand; + } + } + /* + * Reached EOF, but it may be just EOF of an include file... + */ + } while (ParseEOF() == CONTINUE); + + if (fatals) { + (void)fflush(stdout); + (void)fprintf(stderr, + "%s: Fatal errors encountered -- cannot continue", + progname); + PrintOnError(NULL, NULL); + exit(1); + } +} + +/*- + *--------------------------------------------------------------------- + * Parse_Init -- + * initialize the parsing module + * + * Results: + * none + * + * Side Effects: + * the parseIncPath list is initialized... + *--------------------------------------------------------------------- + */ +void +Parse_Init(void) +{ + mainNode = NULL; + parseIncPath = Lst_Init(FALSE); + sysIncPath = Lst_Init(FALSE); + defIncPath = Lst_Init(FALSE); + includes = Lst_Init(FALSE); +#ifdef CLEANUP + targCmds = Lst_Init(FALSE); +#endif +} + +void +Parse_End(void) +{ +#ifdef CLEANUP + Lst_Destroy(targCmds, (FreeProc *)free); + if (targets) + Lst_Destroy(targets, NULL); + Lst_Destroy(defIncPath, Dir_Destroy); + Lst_Destroy(sysIncPath, Dir_Destroy); + Lst_Destroy(parseIncPath, Dir_Destroy); + Lst_Destroy(includes, NULL); /* Should be empty now */ +#endif +} + + +/*- + *----------------------------------------------------------------------- + * Parse_MainName -- + * Return a Lst of the main target to create for main()'s sake. If + * no such target exists, we Punt with an obnoxious error message. + * + * Results: + * A Lst of the single node to create. + * + * Side Effects: + * None. + * + *----------------------------------------------------------------------- + */ +Lst +Parse_MainName(void) +{ + Lst mainList; /* result list */ + + mainList = Lst_Init(FALSE); + + if (mainNode == NULL) { + Punt("no target to make."); + /*NOTREACHED*/ + } else if (mainNode->type & OP_DOUBLEDEP) { + (void)Lst_AtEnd(mainList, mainNode); + Lst_Concat(mainList, mainNode->cohorts, LST_CONCNEW); + } + else + (void)Lst_AtEnd(mainList, mainNode); + Var_Append(".TARGETS", mainNode->name, VAR_GLOBAL); + return (mainList); +} + +/*- + *----------------------------------------------------------------------- + * ParseMark -- + * Add the filename and lineno to the GNode so that we remember + * where it was first defined. + * + * Side Effects: + * None. + * + *----------------------------------------------------------------------- + */ +static void +ParseMark(GNode *gn) +{ + gn->fname = curFile->fname; + gn->lineno = curFile->lineno; +} |
