mdoc: terminate quoted strings.

Reviewed by:	brueffer

7 files changed, 9 insertions, 9 deletions

diff --git a/usr.sbin/arp/arp.4 b/usr.sbin/arp/arp.4
index 335a521..d537350 100644
--- a/usr.sbin/arp/arp.4
+++ b/usr.sbin/arp/arp.4
@@ -186,6 +186,6 @@ is set to 1, which is the system's default behaviour.
 .Rs
 .%A Leffler, S.J.
 .%A Karels, M.J.
-.%B "Trailer Encapsulations
+.%B "Trailer Encapsulations"
 .%T RFC893
 .Re
diff --git a/usr.sbin/bootparamd/bootparamd/bootparamd.8 b/usr.sbin/bootparamd/bootparamd/bootparamd.8
index 6048a8f..3b49822 100644
--- a/usr.sbin/bootparamd/bootparamd/bootparamd.8
+++ b/usr.sbin/bootparamd/bootparamd/bootparamd.8
@@ -58,7 +58,7 @@ The SunOS kernel hangs until it receives a reply.
 To accommodate this behaviour add an alias address
 that responds to an all-0 broadcast.
 So, add something like
-.Ql "ifconfig xl0 192.168.200.254 netmask 255.255.255.255 broadcast 192.168.200.0 alias
+.Ql "ifconfig xl0 192.168.200.254 netmask 255.255.255.255 broadcast 192.168.200.0 alias"
 on the relevant network interface on your
 .Nm
 server.
diff --git a/usr.sbin/bsnmpd/modules/snmp_netgraph/snmp_netgraph.3 b/usr.sbin/bsnmpd/modules/snmp_netgraph/snmp_netgraph.3
index 23a8bfe..a315938 100644
--- a/usr.sbin/bsnmpd/modules/snmp_netgraph/snmp_netgraph.3
+++ b/usr.sbin/bsnmpd/modules/snmp_netgraph/snmp_netgraph.3
@@ -65,7 +65,7 @@
 .Nm ng_node_name ,
 .Nm ng_node_type ,
 .Nm ng_peer_hook_id
-.Nd "netgraph module for snmpd.
+.Nd "netgraph module for snmpd"
 .Sh LIBRARY
 .Pq begemotSnmpdModulePath."netgraph" = "/usr/lib/snmp_netgraph.so"
 .Sh SYNOPSIS
diff --git a/usr.sbin/bsnmpd/modules/snmp_wlan/snmp_wlan.3 b/usr.sbin/bsnmpd/modules/snmp_wlan/snmp_wlan.3
index 20256f0..069d294 100644
--- a/usr.sbin/bsnmpd/modules/snmp_wlan/snmp_wlan.3
+++ b/usr.sbin/bsnmpd/modules/snmp_wlan/snmp_wlan.3
@@ -33,7 +33,7 @@
 .Os
 .Sh NAME
 .Nm snmp_wlan
-.Nd "wireless networking module for
+.Nd "wireless networking module for"
 .Xr bsnmpd 1
 .Sh LIBRARY
 .Pq begemotSnmpdModulePath."wlan" = "/usr/lib/snmp_wlan.so"
diff --git a/usr.sbin/fdwrite/fdwrite.1 b/usr.sbin/fdwrite/fdwrite.1
index e847398..1c231a1 100644
--- a/usr.sbin/fdwrite/fdwrite.1
+++ b/usr.sbin/fdwrite/fdwrite.1
@@ -87,7 +87,7 @@ utility
 was planned as a tool to make life easier when writing a set of floppies,
 one such use could be to write a tar-archive:
 .Pp
-.Dl "tar cf - . | gzip -9 | fdwrite -d /dev/fd0.1720 -v
+.Dl tar cf - . | gzip -9 | fdwrite -d /dev/fd0.1720 -v
 .Pp
 The main difference from using
 .Xr tar 1 Ns 's
diff --git a/usr.sbin/fwcontrol/fwcontrol.8 b/usr.sbin/fwcontrol/fwcontrol.8
index f3a83b7..4d67b3a 100644
--- a/usr.sbin/fwcontrol/fwcontrol.8
+++ b/usr.sbin/fwcontrol/fwcontrol.8
@@ -171,7 +171,7 @@ For PAL, replace
 with
 .Dq Li bs=144000 .
 .Pp
-.Dl "fwcontrol -R file.m2t
+.Dl "fwcontrol -R file.m2t"
 .Pp
 Receive an MPEG TS stream from a camera producing MPEG transport stream.
 This has been tested with SONY HDR-FX1E camera that produces HD MPEG-2
@@ -179,7 +179,7 @@ stream at 25 Mbps bandwidth.
 .Pp
 To send the stream from the camera over the network using TCP (which
 surprisingly works better with vlc), you can use
-.Dl "fwcontrol -R - | nc 192.168.10.11 9000
+.Dl "fwcontrol -R - | nc 192.168.10.11 9000"
 with
 .Nm netcat
 from ports and to receive the stream, use
@@ -190,7 +190,7 @@ To netcast via UDP, you need to use
 program from ports, since vlc is not fast enough to read UDP packets from
 buffers and thus it experiences dropouts when run directly.
 The sending side can use
-.Dl "fwcontrol -R - | nc 192.168.10.11 9000
+.Dl "fwcontrol -R - | nc 192.168.10.11 9000"
 and to receive the stream, use
 .Dl nc -l -u -p 9000 | buffer -s 10k -b 1000 -m 20m -p 5 | vlc -
 .Pp
diff --git a/usr.sbin/lpr/lpr/printcap.5 b/usr.sbin/lpr/lpr/printcap.5
index 60e5520..7076b5f 100644
--- a/usr.sbin/lpr/lpr/printcap.5
+++ b/usr.sbin/lpr/lpr/printcap.5
@@ -72,7 +72,7 @@ Refer to
 .Xr termcap 5
 for a description of the file layout.
 .Bl -column Namexxx Typexx "/var/spool/lpdxxxxx"
-.Sy "Name	Type	Default	Description
+.Sy "Name	Type	Default	Description"
 .It "af	str" Ta Dv NULL Ta No "name of accounting file"
 .It "br	num	none	if lp is a tty, set the baud rate"
 .Xr ( ioctl 2