Fixes to man8 groff mandoc style, usage mistakes, or typos.

PR:		168016
Submitted by:	Nobuyuki Koganemaru
Approved by:	gjb
MFC after:	3 days

10 files changed, 20 insertions, 18 deletions

diff --git a/usr.sbin/cpucontrol/cpucontrol.8 b/usr.sbin/cpucontrol/cpucontrol.8
index 62221c3..0998b20 100644
--- a/usr.sbin/cpucontrol/cpucontrol.8
+++ b/usr.sbin/cpucontrol/cpucontrol.8
@@ -31,7 +31,7 @@
 .Nm cpucontrol
 .Nd control utility for the
 .Xr cpuctl 4
-device.
+device
 .Sh SYNOPSIS
 .Nm
 .Op Fl vh
diff --git a/usr.sbin/ctladm/ctladm.8 b/usr.sbin/ctladm/ctladm.8
index ddbe976..8052dfa 100644
--- a/usr.sbin/ctladm/ctladm.8
+++ b/usr.sbin/ctladm/ctladm.8
@@ -542,7 +542,7 @@ List all LUNs registered with CTL.
 Because this command uses the ioctl port, it will only work when the FETDs
 (Front End Target Drivers) are enabled.
 This command is the equivalent of doing a REPORT LUNS on one LUN and then
-and then an INQUIRY on each LUN in the system.
+an INQUIRY on each LUN in the system.
 .It Ic delay
 Delay commands at the given location.  There are two places where commands
 may be delayed currently: before data is transferred
@@ -749,7 +749,7 @@ single port.
 As a general rule, the WWNN should be the same across all ports on the
 system.
 .It Fl W Ar wwpn
-Set the World Wide Node Name for the given port.
+Set the World Wide Port Name for the given port.
 The
 .Fl n
 argument must be specified, since this is only possible to implement on a
@@ -939,10 +939,10 @@ Create a LUN using the block backend, specify the file
 .Pa src/usr.sbin/ctladm/ctladm.8
 as the backing store, and specify the
 .Tn SCSI
-VPD page 0x80 and 0x83 serial number (
-.Fl S)
-and device ID (
-.Fl d).
+VPD page 0x80 and 0x83 serial number
+.Fl ( S )
+and device ID
+.Fl ( d ) .
 .Pp
 .Dl ctladm remove -b block -l 12
 .Pp
diff --git a/usr.sbin/flowctl/flowctl.8 b/usr.sbin/flowctl/flowctl.8
index 5abeddb..cbb97d4 100644
--- a/usr.sbin/flowctl/flowctl.8
+++ b/usr.sbin/flowctl/flowctl.8
@@ -60,7 +60,7 @@ This command is the analog of the
 .Dq "show ip cache flow"
 command of a Cisco router.
 It dumps the contents of the flow cache in Cisco-like format.
-Specifing either
+Specifying either
 .Cm ipv4
 or
 .Cm ipv6
diff --git a/usr.sbin/freebsd-update/freebsd-update.8 b/usr.sbin/freebsd-update/freebsd-update.8
index 2d9a4473..472a5f7 100644
--- a/usr.sbin/freebsd-update/freebsd-update.8
+++ b/usr.sbin/freebsd-update/freebsd-update.8
@@ -62,7 +62,7 @@ Release Engineering Team, e.g.,
 .Fx
 9.0-CURRENT.
 .Sh OPTIONS
-The following options are supported
+The following options are supported:
 .Bl -tag -width "-f conffile"
 .It Fl b Ar basedir
 Operate on a system mounted at
diff --git a/usr.sbin/i2c/i2c.8 b/usr.sbin/i2c/i2c.8
index ac71af3..cd269fa 100644
--- a/usr.sbin/i2c/i2c.8
+++ b/usr.sbin/i2c/i2c.8
@@ -88,7 +88,7 @@ reset the controller.
 .It Fl s
 scan the bus for devices.
 .It Fl v
-be verbose
+be verbose.
 .It Fl w Ar 0|8|16
 device addressing width (in bits).
 .El
diff --git a/usr.sbin/jail/jail.8 b/usr.sbin/jail/jail.8
index a38d751..2905806 100644
--- a/usr.sbin/jail/jail.8
+++ b/usr.sbin/jail/jail.8
@@ -255,7 +255,7 @@ They can also be given the values
 .Dq true
 and
 .Dq false .
-Other partameters may have more than one value, specified as a
+Other parameters may have more than one value, specified as a
 comma-separated list or with
 .Dq +=
 in the configuration file (see
@@ -269,7 +269,7 @@ parameters that are passed to the kernel when the jail is created,
 can be seen with
 .Xr jls 8 ,
 and can (usually) be changed with
-.Dq Nm Fl m.
+.Dq Nm Fl m .
 Then there are pseudo-parameters that are only used by
 .Nm
 itself.
@@ -580,7 +580,7 @@ command parameters are
 command lines that are run in either the system or prison environment.
 They may be given multiple values, which run would the specified
 commands in sequence.
-All commands must succed (return a zero exit status), or the jail will
+All commands must succeed (return a zero exit status), or the jail will
 not be created or removed.
 .Pp
 The pseudo-parameters are:
@@ -657,7 +657,8 @@ The maximum amount of time to wait for a prison's processes to exit
 after sending them a
 .Dv SIGTERM
 signal (which happens after the
-.Va exec.stop commands have completed).
+.Va exec.stop
+commands have completed).
 After this many seconds have passed, the prison will be removed, which
 will kill any remaining processes.
 If this is set to zero, no
diff --git a/usr.sbin/rtadvctl/rtadvctl.8 b/usr.sbin/rtadvctl/rtadvctl.8
index f779c98..be3eefe 100644
--- a/usr.sbin/rtadvctl/rtadvctl.8
+++ b/usr.sbin/rtadvctl/rtadvctl.8
@@ -31,7 +31,8 @@
 .Sh NAME
 .Nm rtadvctl
 .Nd control program for
-.Xr rtadvd 8 daemon
+.Xr rtadvd 8
+daemon
 .Sh SYNOPSIS
 .Nm
 .Op Fl v
diff --git a/usr.sbin/rtadvd/rtadvd.8 b/usr.sbin/rtadvd/rtadvd.8
index 4b74eb4..ad39887 100644
--- a/usr.sbin/rtadvd/rtadvd.8
+++ b/usr.sbin/rtadvd/rtadvd.8
@@ -140,7 +140,7 @@ option, which enables routing renumbering protocol support.
 .It Fl p
 Specify an alternative file in which to store the process ID.
 The default is
-.Pa /var/run/rtadvd.pid.
+.Pa /var/run/rtadvd.pid .
 .It Fl R
 Accept router renumbering requests.
 If you enable it, certain IPsec setup is suggested for security reasons.
diff --git a/usr.sbin/smbmsg/smbmsg.8 b/usr.sbin/smbmsg/smbmsg.8
index 1a616f7..39caa67 100644
--- a/usr.sbin/smbmsg/smbmsg.8
+++ b/usr.sbin/smbmsg/smbmsg.8
@@ -70,7 +70,7 @@ and writeable, respectively.
 The only valid additional option for this modus of operation (besides
 the
 .Fl p
-option that choses the modus) is
+option that chooses the modus) is
 .Fl f Ar dev .
 See below for a description.
 .Pp
diff --git a/usr.sbin/wpa/ndis_events/ndis_events.8 b/usr.sbin/wpa/ndis_events/ndis_events.8
index eacb017..9cc2bcd 100644
--- a/usr.sbin/wpa/ndis_events/ndis_events.8
+++ b/usr.sbin/wpa/ndis_events/ndis_events.8
@@ -71,7 +71,7 @@ When it detects an event that was generated by an
 interface, it transmits it via UDP packet on the loopback interface,
 where
 .Xr wpa_supplicant 8
-is presumeably listening.
+is presumably listening.
 The standard
 .Xr wpa_supplicant 8
 distribution includes its own version of this utility for use with