Whitespace change: reformat to avoid hard sentence breaks and long

lines.

1 files changed, 35 insertions, 19 deletions

diff --git a/usr.sbin/mlxcontrol/mlxcontrol.8 b/usr.sbin/mlxcontrol/mlxcontrol.8
index ac06e5c..044fb94 100644
--- a/usr.sbin/mlxcontrol/mlxcontrol.8
+++ b/usr.sbin/mlxcontrol/mlxcontrol.8
@@ -60,46 +60,62 @@ help
 .Sh DESCRIPTION
 The
 .Nm
-utility provides status monitoring and management functions for devices attached
+utility provides status monitoring and management functions
+for devices attached
 to the
 .Xr mlx 4
 driver.
 .Pp
-Controller names are of the form "mlxN" where N is the unit number of the controller.
-Drive names are of the form "mlxdN" where N is the unit number of the drive.  Do not
-specify the path to a device node.
+Controller names are of the form "mlxN"
+where N is the unit number of the controller.
+Drive names are of the form "mlxdN"
+where N is the unit number of the drive.
+Do not specify the path to a device node.
 .Pp
 .Bl -tag -width status
 .It status
-Print the status of controllers and system drives.  If one or more drives are specified,
-only print information about these drives, otherwise print information about all controllers
-and drives in the system.  With the
+Print the status of controllers and system drives.
+If one or more drives are specified,
+only print information about these drives,
+otherwise print information
+about all controllers and drives in the system.
+With the
 .Fl v
 flag, display much more verbose information.
 With the
 .Fl q
-flag, do not print any output.  This command returns 0 if all drives tested are online, 1
-if one or more drives are critical and 2 if one or more are offline.
+flag, do not print any output.
+This command returns
+0 if all drives tested are online,
+1 if one or more drives are critical and
+2 if one or more are offline.
 .It rescan
-Rescan one or more controllers for non-attached system drives (eg. drives that have been
-detached or created subsequent to driver initialisation).  If the
+Rescan one or more controllers for non-attached system drives
+(eg. drives that have been
+detached or created subsequent to driver initialisation).
+If the
 .Fl a
 flag is supplied, rescan all controllers in the system.
 .It detach
-Detach one or more system drives.  Drives must be unmounted and not opened by any other
-utility for this command to succeed.  If the
+Detach one or more system drives.
+Drives must be unmounted
+and not opened by any other utility for this command to succeed.
+If the
 .Fl a
 flag is supplied, detach all system drives from the nominated controller.
 .It check
-Initiate a consistency check and repair pass on a redundant system drive (eg. RAID1 or RAID5).
-The controller will scan the system drive and repair any inconsistencies.  This command
-returns immediately; use the 
+Initiate a consistency check and repair pass on a redundant system drive
+(eg. RAID1 or RAID5).
+The controller will scan the system drive and repair any inconsistencies.
+This command returns immediately;
+use the 
 .Ar status
 command to monitor the progress of the check.
 .It config
-Print the current configuration from the nominated controller.  This command will be 
-updated to allow addition/deletion of system drives from a configuration in a future
-release.
+Print the current configuration from the nominated controller.
+This command will be updated
+to allow addition/deletion of system drives from a configuration
+in a future release.
 .It help
 Print usage information for
 .Ar command .