diff options
author | dd <dd@FreeBSD.org> | 2001-07-15 08:06:20 +0000 |
---|---|---|
committer | dd <dd@FreeBSD.org> | 2001-07-15 08:06:20 +0000 |
commit | 911ca14c8798a89d240d36ecbc63b5df5dd99f66 (patch) | |
tree | 62f210bf3aee25e49335dc77030fff6e97fbe447 /usr.sbin/i4b/isdnd/isdnd.rc.5 | |
parent | a145482cf625d5f04072fd1d20b5c2062cbe8e47 (diff) | |
download | FreeBSD-src-911ca14c8798a89d240d36ecbc63b5df5dd99f66.zip FreeBSD-src-911ca14c8798a89d240d36ecbc63b5df5dd99f66.tar.gz |
Remove whitespace at EOL.
Diffstat (limited to 'usr.sbin/i4b/isdnd/isdnd.rc.5')
-rw-r--r-- | usr.sbin/i4b/isdnd/isdnd.rc.5 | 128 |
1 files changed, 64 insertions, 64 deletions
diff --git a/usr.sbin/i4b/isdnd/isdnd.rc.5 b/usr.sbin/i4b/isdnd/isdnd.rc.5 index b2ea569..ee5be5c 100644 --- a/usr.sbin/i4b/isdnd/isdnd.rc.5 +++ b/usr.sbin/i4b/isdnd/isdnd.rc.5 @@ -36,7 +36,7 @@ The file .Pa /etc/isdn/isdnd.rc contains (if not otherwise specified on the command line) the runtime -configuration for the +configuration for the .Xr isdnd 8 ISDN connection management daemon which is part of the isdn4bsd package. .Pp @@ -65,7 +65,7 @@ sections and one or more sections. In the .Em system -section parameters regarding the daemon operation or parameters +section parameters regarding the daemon operation or parameters not associated with a single remote connection can be set. In the .Em controller @@ -81,7 +81,7 @@ The following keywords are recognized by .Bl -tag -width system .It Li system This keyword starts the system configuration section. -It must not +It must not have a parameter and may be used only once. The keyword is mandatory. The following keywords are valid in the system configuration section: @@ -95,7 +95,7 @@ or no charging information is available or is not subscribed. .It Li acctfile Specifies the name of the accounting file which is used when the keyword .Em useacctfile -(see below) is set to +(see below) is set to .Em on . See also system keyword .Em rotatesuffix . @@ -111,7 +111,7 @@ The default is off. (optional) .It Li aliasfile Specifies the name of the telephone number-to-name alias database file shared -with the +with the .Xr isdntel 1 utility when alias processing is enabled via the .Em aliasing @@ -143,7 +143,7 @@ The default is off. (optional) .It Li mailer This keyword is used to specify the path/name of a mail program which -which is able to use the "-s" flag to specify a subject on its +which is able to use the "-s" flag to specify a subject on its command line. In case of a fatal error exit of .Nm @@ -161,8 +161,8 @@ in case of a fatal error exit of (optional) .It Li monitor-allowed If this parameter is set to -.Em on -or +.Em on +or .Em yes , monitoring via a local or remote machine is enabled. This parameter is optional and is set to @@ -174,8 +174,8 @@ This integer parameter is optional and is set to port 451 by default. .It Li monitor This keyword specifies a local socket name or a host or network for remote monitoring. -The -.Em monitor +The +.Em monitor specification may either be: .Pp .Bl -tag -width Ds -compact @@ -191,7 +191,7 @@ example: localhost example: up-vision-net/24 .El .It Li monitor-access -This keyword specifies the access rights for a previously used +This keyword specifies the access rights for a previously used .Em monitor keyword. The supported access rights are: @@ -251,15 +251,15 @@ If this keyword is omitted, the log-files are just closed and reopened; this is also the default behavior. (optional) .It Li rtprio -Specifies the real-time priority +Specifies the real-time priority .Nm isdnd runs at as an integer value in the range 0...31 with 0 being the highest priority. -This keyword is optional; if not specified the process priority of +This keyword is optional; if not specified the process priority of .Nm isdnd is not touched in any way. ( See also -.Xr rtprio 1 +.Xr rtprio 1 ). This keyword is only available if .Nm @@ -273,15 +273,15 @@ accounting file. .El .It Li controller This keyword starts the controller configuration section. -It must not +It must not have a parameter and may be used once for every controller. The keyword is optional. -The following keywords are valid in a controller +The following keywords are valid in a controller configuration section: .Bl -tag -width useacctfile .It Li protocol -This keyword is used to set the D-channel protocol for the S0-bus a +This keyword is used to set the D-channel protocol for the S0-bus a controller is connected to. The following parameters are currently supported: @@ -352,7 +352,7 @@ No framing at all (used for telephony). .It Li budget-calloutperiod is used to specify a time period in seconds. Within this period, the number of calls -specified by +specified by .Em budget-calloutncalls are allowed to succeed, any further attempt to call out will be blocked for the rest of the time left in the time period. @@ -396,11 +396,11 @@ The time in seconds to wait for a remote site calling back the local site after a call from the local site to the remote site has been made. (optional) .It Li clone -This causes the contents of the specified entry to be copied from the +This causes the contents of the specified entry to be copied from the existing named entry to the current one. When using this feature at least a new entry specific .Ql name -and +and .Ql usrdeviceunit value should be specified for the current entry. .It Li connectprog @@ -411,11 +411,11 @@ expects to find the program below the path .Pa /etc/isdn which is prepended to the string specified as a parameter to this keyword. The programs specified by connect and disconnect will get the following -command line arguments: -d (device) -f (flag) [ -a (addr) ] where +command line arguments: -d (device) -f (flag) [ -a (addr) ] where .Em device -is the name of device, e.g. "isp0", +is the name of device, e.g. "isp0", .Em flag -will be "up" if connection just got up, or "down" if interface changed to down +will be "up" if connection just got up, or "down" if interface changed to down state and .Em addr the address that got assigned to the interface as a dotted-quad ip address @@ -495,8 +495,8 @@ seconds). further up). This keyword is optional. .It Li downtime -is used to configure the time in seconds an interface is disabled -after the configured number of +is used to configure the time in seconds an interface is disabled +after the configured number of .Em downtries . (see also the keyword .Em usedown @@ -536,20 +536,20 @@ this channel but mark the request as .Em preferred (the indicated channel is preferred) instead of exclusive (only the indicated channel is acceptable). -Thus the exchange is still free to select another +Thus the exchange is still free to select another than the requested channel! (mandatory) .It Li isdntxdel-incoming A delay value suitable for the .Xr timeout 9 kernel subroutine to delay the transmission of the first packet after a -successful connection is made by this value for +successful connection is made by this value for .Em incoming ISDN connections. The specification unit is 1/100 second. A zero (0) disables this feature and is the default value. -This feature is implemented (and makes +This feature is implemented (and makes sense only) for the .Xr i4bipr 4 IP over raw HDLC ISDN driver. @@ -558,11 +558,11 @@ IP over raw HDLC ISDN driver. A delay value suitable for the .Xr timeout 9 kernel subroutine to delay the transmission of the first packet after a -successful connection is made by this value for +successful connection is made by this value for .Em outgoing ISDN connections. The specification unit is 1/100 second. -A zero (0) disables +A zero (0) disables this feature and is the default value. This feature is implemented (and makes sense only) for the @@ -575,13 +575,13 @@ When dialing out to a remote site, the number specified here is put into the .Em "Calling Party Number Information Element" . .Pp -This keyword is mandatory for the -.Em ipr +This keyword is mandatory for the +.Em ipr user-land interfaces. .It Li local-phone-incoming The local telephone number used for verifying the destination of incoming calls. -When a remote site dials in, this number is used to verify that it +When a remote site dials in, this number is used to verify that it is the local site which the remote site wants to connect to. It is compared with the @@ -600,10 +600,10 @@ to a remote site and for accounting purposes. .It Li ppp-auth-paranoid If set to .Em no , -the remote site is not required to prove its authentity for connections +the remote site is not required to prove its authentity for connections that are initiated by the local site. -The default is -.Em yes +The default is +.Em yes and requires the remote site to always authenticate. .Pp This keyword is only used if @@ -616,7 +616,7 @@ PPP interface. Set to .Em no , if the other side does not support re-challenging for chap. -The default is +The default is .Em yes , which causes verification of the remote site's authentity once in a while. .Pp @@ -628,34 +628,34 @@ PPP interface. (optional) .It Li ppp-expect-auth The local site expects the authentity of the remote site to be proved by -the specified method. +the specified method. The supported methods are: .Pp .Bl -tag -width Ds -compact .It Ar none Do not require the other side to authenticate. -Typical uses are dial-out to an ISP +Typical uses are dial-out to an ISP (many ISPs do not authenticate themselves to clients) or offering anonymous dial-in at the local site. .It Ar chap -The preferred authentication method, which does not require a password to be sent +The preferred authentication method, which does not require a password to be sent in the clear. .It Ar pap -The unprotected authentication method, which allows anybody watching the wire +The unprotected authentication method, which allows anybody watching the wire to grab name and password. .El .Pp -If +If .Em ppp-auth-paranoid -is set to -.Em no -(the default is +is set to +.Em no +(the default is .Em yes ) outgoing connections will not require the remote site to authenticate itself. .Pp This keyword is only used for the .Em isp -PPP interfaces. +PPP interfaces. (optional) .It Li ppp-expect-name The name that has to be provided by the remote site to prove its authentity. @@ -683,16 +683,16 @@ The currently supported parameters are: .It Ar none The remote site does not expect or support authentication. .It Ar chap -The preferred authentication method, which does not require a password to be sent +The preferred authentication method, which does not require a password to be sent in the clear. .It Ar pap -The unprotected authentication method, which allows anybody watching the wire +The unprotected authentication method, which allows anybody watching the wire to grab name and password. .El .Pp This keyword is only used for the .Em isp -PPP interfaces. +PPP interfaces. (optional) .It Li ppp-send-name The authentication name sent to the remote site. @@ -723,7 +723,7 @@ days of the week & times per day). The time in seconds to wait between dial retries. (optional) .It Li remdial-handling -is used to specify the dialout behavior in case more than one outgoing +is used to specify the dialout behavior in case more than one outgoing number is specified. The currently supported parameters are: .Pp @@ -754,7 +754,7 @@ When a remote site dials in, this number is used to verify that it is the correct remote site which is herewith authorized to connect into the local system. This parameter -is compared against the +is compared against the .Em "Calling Party Number Information Element" got from the telephone exchange. .Pp @@ -774,7 +774,7 @@ The currently configurable values are: .Pp .Bl -tag -width Ds -compact .It Ar none -Then unitlength is not specified anywhere. +Then unitlength is not specified anywhere. .It Ar cmdl Use the unitlength specified on the command line. .It Ar conf @@ -835,7 +835,7 @@ indicator ( see also the .Em holidayfile keyword in the system section ) separated by commas followed by an optional daytime range specification in the form hh:mm-hh:mm. -The weekdays are specified as numbers from 0 to 6 and the number 7 for +The weekdays are specified as numbers from 0 to 6 and the number 7 for holidays: .Pp .Bl -tag -width Ds -compact @@ -891,7 +891,7 @@ unit time: typical values are one to five minutes. Outgoing call disconnect time can be setup in one of three ways: .Bl -tag -width "shorthold mode .It Li simple mode -For simple mode, the +For simple mode, the .Em idle-algorithm-outgoing must be .Em fix-unit-size @@ -899,7 +899,7 @@ and the selected .Em unitlength must be 0 (zero) and .Em idletime-outgoing -greater zero. +greater zero. .Pp The outgoing traffic is constantly monitored, and in case there was not traffic taking place for the time in seconds specified by @@ -908,13 +908,13 @@ the call is closed. .Pp Typical values in simple mode are 10 to 30 seconds. .It Li shorthold mode for fixed unit charging -For shorthold mode, the +For shorthold mode, the .Em idle-algorithm-outgoing must be .Em fix-unit-size and the selected -.Em unitlength -and +.Em unitlength +and .Em idletime-outgoing must be greater than 0 (zero); .Em earlyhangup @@ -938,19 +938,19 @@ at the beginning of the next unit. In case no traffic was detected during the check-window, the line is closed at the end of the check window. .Pp -Notice: +Notice: .Em unitlength must (!) be greater than the sum of .Em idletime-outgoing and .Em earlyhangup ! .It Li shorthold mode for variable unit charging -For shorthold mode, the +For shorthold mode, the .Em idle-algorithm-outgoing must be .Em var-unit-size and the selected -.Em unitlength +.Em unitlength and .Em idletime-outgoing must be greater than 0 (zero); @@ -1001,10 +1001,10 @@ ISDN daemon. .Xr isdnmonitor 8 .Sh AUTHORS .An -nosplit -The +The .Xr isdnd 8 -daemon and this manual page were written by +daemon and this manual page were written by .An Hellmuth Michaelis Aq hm@FreeBSD.org . .Pp -Additions to this manual page by +Additions to this manual page by .An Barry Scott Aq barry@scottb.demon.co.uk . |