Move sys/pccard/*.h here.

1 files changed, 205 insertions, 0 deletions

diff --git a/usr.sbin/dumpcis/cardinfo.h b/usr.sbin/dumpcis/cardinfo.h
new file mode 100644
index 0000000..9489067
--- /dev/null
+++ b/usr.sbin/dumpcis/cardinfo.h
@@ -0,0 +1,205 @@
+/*
+ *	Include file for PCMCIA user process interface
+ *
+ *-------------------------------------------------------------------------
+ */
+/*-
+ * Copyright (c) 1995 Andrew McRae.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* $FreeBSD$ */
+
+#ifndef	_PCCARD_CARDINFO_H_
+#define	_PCCARD_CARDINFO_H_
+
+#ifndef _KERNEL
+#include <sys/types.h>
+#endif
+#include <sys/ioccom.h>
+
+#define	PIOCGSTATE	_IOR('P', 1, struct slotstate)	/* Get slot state */
+#define	PIOCGMEM	_IOWR('P', 2, struct mem_desc)	/* Get memory map */
+#define	PIOCSMEM	_IOW('P', 3, struct mem_desc)	/* Set memory map */
+#define	PIOCGIO		_IOWR('P', 4, struct io_desc)	/* Get I/O map */
+#define	PIOCSIO		_IOW('P', 5, struct io_desc)	/* Set I/O map */
+#define PIOCSDRV	_IOWR('P', 6, struct dev_desc)	/* Set driver */
+#define PIOCRWFLAG	_IOW('P', 7, int)	/* Set flags for drv use */
+#define PIOCRWMEM	_IOWR('P', 8, unsigned long) /* Set mem for drv use */
+#define PIOCSPOW	_IOW('P', 9, struct power) /* Set power structure */
+#define PIOCSVIR	_IOW('P', 10, int)	/* Virtual insert/remove */
+#define PIOCSBEEP	_IOW('P', 11, int)		/* Select Beep */
+#define PIOCSRESOURCE	_IOWR('P', 12, struct pccard_resource)	/* get resource info */
+/*
+ *	Debug codes.
+ */
+#define PIOCGREG	_IOWR('P',100, struct pcic_reg)	/* get reg */
+#define PIOCSREG	_IOW('P', 101, struct pcic_reg)	/* Set reg */
+
+/*
+ *	Slot states for PIOCGSTATE
+ *
+ *	Here's a state diagram of all the possible states:
+ *
+ *                             power x 1
+ *                       -------------------
+ *                      /                   \
+ *                     /                     v
+ *    resume    +----------+   power x 0   +----------+
+ *      ------->| inactive |<--------------| filled   |
+ *     /        +----------+               +----------+
+ *    /           /     \                   ^   |
+ *  nil <---------       \        insert or |   | suspend or
+ *        suspend         \       power x 1 |   | eject
+ *                         \                |   v
+ *                          \            +----------+
+ *                           ----------->|  empty   |
+ *                             eject     +----------+
+ *
+ *	Note, the above diagram is for the state.  On suspend, the laststate
+ * gets set to suspend to tell pccardd what happened.  Also the nil state
+ * means that when the no state change has happened.  Note: if you eject
+ * while suspended in the inactive state, you will return to the
+ * empty state if you do not insert a new card and to the inactive state
+ * if you do insert a new card.
+ *
+ * Some might argue that inactive should be sticky forever and
+ * eject/insert shouldn't take it out of that state.  They might be
+ * right.  On the other hand, some would argue that eject resets all
+ * state.  They might be right.  They both can't be right.  The above
+ * represents a reasonable compromise between the two.
+ *
+ * Some bridges allow one to query to see if the card was changed while
+ * we were suspended.  Others do not.  We make no use of this functionality
+ * at this time.
+ */
+enum cardstate { noslot, empty, suspend, filled, inactive };
+
+/*
+ *	Descriptor structure for memory map.
+ */
+struct mem_desc {
+	int	window;		/* Memory map window number (0-4) */
+	int	flags;		/* Flags - see below */
+	caddr_t	start;		/* System memory start */
+	int	size;		/* Size of memory area */
+	unsigned long card;	/* Card memory address */
+};
+
+#define	MDF_16BITS	0x01	/* Memory is 16 bits wide */
+#define	MDF_ZEROWS	0x02	/* Set no wait states for memory */
+#define	MDF_WS0		0x04	/* Wait state flags */
+#define	MDF_WS1		0x08
+#define	MDF_ATTR	0x10	/* Memory is attribute memory */
+#define	MDF_WP		0x20	/* Write protect memory */
+#define	MDF_ACTIVE	0x40	/* Context active (read-only) */
+
+/*
+ *	Descriptor structure for I/O map
+ */
+struct io_desc {
+	int	window;		/* I/O map number (0-1) */
+	int	flags;		/* Flags - see below */
+	int	start;		/* I/O port start */
+	int	size;		/* Number of port addresses */
+};
+
+#define	IODF_WS		0x01	/* Set wait states for 16 bit I/O access */
+#define	IODF_16BIT	0x02	/* I/O access are 16 bit */
+#define	IODF_CS16	0x04	/* Allow card selection of 16 bit access */
+#define	IODF_ZEROWS	0x08	/* No wait states for 8 bit I/O */
+#define	IODF_ACTIVE	0x10	/* Context active (read-only) */
+
+/*
+ *	Device descriptor for allocation of driver.
+ */
+#define DEV_MISC_LEN	36
+#define DEV_MAX_CIS_LEN	40
+struct dev_desc {
+	char		name[16];	/* Driver name */
+	int		unit;		/* Driver unit number */
+	unsigned long	mem;		/* Memory address of driver */
+	int		memsize;	/* Memory size (if used) */
+	int		iobase;		/* base of I/O ports */
+	int		iosize;		/* Length of I/O ports */
+	int		irqmask;	/* Interrupt number(s) to allocate */
+	int		flags;		/* Device flags */
+	uint8_t		misc[DEV_MISC_LEN]; /* For any random info */
+	uint8_t		manufstr[DEV_MAX_CIS_LEN];
+	uint8_t		versstr[DEV_MAX_CIS_LEN];
+	uint8_t		cis3str[DEV_MAX_CIS_LEN];
+	uint8_t		cis4str[DEV_MAX_CIS_LEN];
+	uint32_t	manufacturer;	/* Manufacturer ID */
+	uint32_t	product;	/* Product ID */
+	uint32_t	prodext;	/* Product ID (extended) */
+};
+#define DEV_DESC_HAS_SIZE 1
+
+struct pcic_reg {
+	unsigned char reg;
+	unsigned char value;
+};
+
+/*
+ *	Slot information. Used to read current status of slot.
+ */
+struct slotstate {
+	enum cardstate	state;		/* Current state of slot */
+	enum cardstate	laststate;	/* Previous state of slot */
+	int		maxmem;		/* Max allowed memory windows */
+	int		maxio;		/* Max allowed I/O windows */
+	int		irqs;		/* Bitmap of IRQs allowed */
+	int		flags;		/* Capability flags */
+};
+
+/*
+ *	The power values are in volts * 10, e.g. 5V is 50, 3.3V is 33.
+ */
+struct power {
+	int		vcc;
+	int		vpp;
+};
+
+/*
+ *	The PC-Card resource IOC_GET_RESOURCE_RANGE
+ */
+struct pccard_resource {
+	int		type;
+	u_long		size;
+	u_long		min;
+	u_long		max;
+	u_long		resource_addr;
+};
+
+
+/*
+ *	Other system limits
+ */
+#define MAXSLOT 16
+#define	NUM_MEM_WINDOWS	10
+#define	NUM_IO_WINDOWS	6
+#define	CARD_DEVICE	"/dev/card%d"		/* String for snprintf */
+#define	PCCARD_MEMSIZE	(4*1024)
+
+#endif /* !_PCCARD_CARDINFO_H_ */