summaryrefslogtreecommitdiffstats
path: root/tests/etc
diff options
context:
space:
mode:
authorngie <ngie@FreeBSD.org>2015-05-31 22:39:48 +0000
committerngie <ngie@FreeBSD.org>2015-05-31 22:39:48 +0000
commitf0e277f5171cddbc8070bd69b08c2cda46ea16c9 (patch)
treedea2fcf3dbbd6221861e9980641260e7426396e9 /tests/etc
parentbaef3fdea06230e5063198b5c21256e205fe907d (diff)
downloadFreeBSD-src-f0e277f5171cddbc8070bd69b08c2cda46ea16c9.zip
FreeBSD-src-f0e277f5171cddbc8070bd69b08c2cda46ea16c9.tar.gz
MFC r277627,r277650,r282059,r283056,r283840,r283845:
r277627 (by will): Add routing_test:static_ipv6_loopback_route_for_each_fib. It tests that all FIBs get a static IPv6 loopback route. Submitted by: asomers Sponsored by: Spectra Logic MFSpectraBSD: 1048456 on 2014/03/13 1114523 on 2015/01/23 r277650 (by will): Add tests/etc/rc.d to mtree. Submitted by: stefanf MFC with: 277627 r282059: Move etc/tests/rc.d to etc/rc.d/tests to match the directory layout jmmv@ documented and implemented in other areas of the FreeBSD tree r283056: Move all test integration pieces for etc/ from etc/ to tests/ This is being done to fix breakage with make distribution with read-only source trees as make distribution doesn't use make obj like building tests/ does in all cases Reported by: Wolfgang Zenker <wolfgang@lyxys.ka.sub.org> Suggested by: jhb r283840: Remove empty tests directory r283845: Append to SUBDIR, not set it Pointyhat to: ngie
Diffstat (limited to 'tests/etc')
-rw-r--r--tests/etc/Makefile12
-rw-r--r--tests/etc/rc.d/Makefile7
-rwxr-xr-xtests/etc/rc.d/routing_test.sh138
3 files changed, 157 insertions, 0 deletions
diff --git a/tests/etc/Makefile b/tests/etc/Makefile
new file mode 100644
index 0000000..9aad25c
--- /dev/null
+++ b/tests/etc/Makefile
@@ -0,0 +1,12 @@
+# $FreeBSD$
+
+.include <bsd.own.mk>
+
+TESTSDIR= ${TESTSBASE}/etc
+
+.PATH: ${.CURDIR:H}
+KYUAFILE= yes
+
+SUBDIR+= rc.d
+
+.include <bsd.test.mk>
diff --git a/tests/etc/rc.d/Makefile b/tests/etc/rc.d/Makefile
new file mode 100644
index 0000000..368e8f4
--- /dev/null
+++ b/tests/etc/rc.d/Makefile
@@ -0,0 +1,7 @@
+# $FreeBSD$
+
+TESTSDIR= ${TESTSBASE}/etc/rc.d
+
+ATF_TESTS_SH+= routing_test
+
+.include <bsd.test.mk>
diff --git a/tests/etc/rc.d/routing_test.sh b/tests/etc/rc.d/routing_test.sh
new file mode 100755
index 0000000..693af23
--- /dev/null
+++ b/tests/etc/rc.d/routing_test.sh
@@ -0,0 +1,138 @@
+#
+# Copyright (c) 2014 Spectra Logic Corporation
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions, and the following disclaimer,
+# without modification.
+# 2. Redistributions in binary form must reproduce at minimum a disclaimer
+# substantially similar to the "NO WARRANTY" disclaimer below
+# ("Disclaimer") and any redistribution must be conditioned upon
+# including a substantially similar Disclaimer requirement for further
+# binary redistribution.
+#
+# NO WARRANTY
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGES.
+#
+# Authors: Alan Somers (Spectra Logic Corporation)
+#
+# $FreeBSD$
+
+atf_test_case static_ipv6_loopback_route_for_each_fib cleanup
+static_ipv6_loopback_route_for_each_fib_head()
+{
+ atf_set "descr" "Every FIB should have a static IPv6 loopback route"
+ atf_set "require.user" "root"
+ atf_set "require.config" "fibs"
+ atf_set "require.progs" "sysrc"
+}
+static_ipv6_loopback_route_for_each_fib_body()
+{
+ # Configure the TAP interface to use an RFC5737 nonrouteable address
+ # and a non-default fib
+ ADDR="192.0.2.2"
+ SUBNET="192.0.2.0"
+ MASK="24"
+
+ # Check system configuration
+ if [ 0 != `sysctl -n net.add_addr_allfibs` ]; then
+ atf_skip "This test requires net.add_addr_allfibs=0"
+ fi
+
+ get_fibs 1
+ get_tap
+
+ # Configure a TAP interface in /etc/rc.conf. Register the sysrc
+ # variable for cleanup.
+ echo "ifconfig_${TAP}" >> "sysrc_vars_to_cleanup"
+ sysrc ifconfig_${TAP}="${ADDR}/${MASK} fib ${FIB0}"
+
+ # Start the interface
+ service netif start ${TAP}
+ # Check for an IPv6 loopback route
+ setfib ${FIB0} netstat -rn -f inet6 | grep -q "^::1.*lo0$"
+ if [ 0 -eq $? ]; then
+ atf_pass
+ else
+ setfib ${FIB0} netstat -rn -f inet6
+ atf_fail "Did not find an IPv6 loopback route"
+ fi
+}
+static_ipv6_loopback_route_for_each_fib_cleanup()
+{
+ cleanup_sysrc
+ cleanup_tap
+}
+
+atf_init_test_cases()
+{
+ atf_add_test_case static_ipv6_loopback_route_for_each_fib
+}
+
+# Looks up one or more fibs from the configuration data and validates them.
+# Returns the results in the env varilables FIB0, FIB1, etc.
+# parameter numfibs The number of fibs to lookup
+get_fibs()
+{
+ NUMFIBS=$1
+ net_fibs=`sysctl -n net.fibs`
+ i=0
+ while [ $i -lt "$NUMFIBS" ]; do
+ fib=`atf_config_get "fibs" | \
+ awk -v i=$(( i + 1 )) '{print $i}'`
+ echo "fib is ${fib}"
+ eval FIB${i}=${fib}
+ if [ "$fib" -ge "$net_fibs" ]; then
+ msg="The ${i}th configured fib is ${fub}, which is "
+ msg="$msg not less than net.fibs (${net_fibs})"
+ atf_skip "$msg"
+ fi
+ i=$(( $i + 1 ))
+ done
+}
+
+
+# Creates a new tap(4) interface, registers it for cleanup, and returns the
+# name via the environment variable TAP
+get_tap()
+{
+ local TAPN=0
+ while ! ifconfig tap${TAPN} create > /dev/null 2>&1; do
+ if [ "$TAPN" -ge 8 ]; then
+ atf_skip "Could not create a tap(4) interface"
+ else
+ TAPN=$(($TAPN + 1))
+ fi
+ done
+ local TAPD=tap${TAPN}
+ # Record the TAP device so we can clean it up later
+ echo ${TAPD} >> "tap_devices_to_cleanup"
+ TAP=${TAPD}
+}
+
+cleanup_sysrc()
+{
+ for var in `cat "sysrc_vars_to_cleanup"`; do
+ sysrc -x $var
+ done
+}
+
+cleanup_tap()
+{
+ for TAPD in `cat "tap_devices_to_cleanup"`; do
+ ifconfig ${TAPD} destroy
+ done
+}
OpenPOWER on IntegriCloud