diff options
author | wpaul <wpaul@FreeBSD.org> | 1999-08-27 18:58:27 +0000 |
---|---|---|
committer | wpaul <wpaul@FreeBSD.org> | 1999-08-27 18:58:27 +0000 |
commit | fa6cd402be7d460f6b95f56163ae7a0605ac238a (patch) | |
tree | 159ea99f0e8c4ccfbaed73b8663969d0ba97027b /sys | |
parent | ea005100f82a3cf7703048fcbfcff58781b81f55 (diff) | |
download | FreeBSD-src-fa6cd402be7d460f6b95f56163ae7a0605ac238a.zip FreeBSD-src-fa6cd402be7d460f6b95f56163ae7a0605ac238a.tar.gz |
Convert the ThunderLAN driver to miibus. This took me a while because I
had to get the ML 6692 PHY driver working correctly, which is harder than
it sounds. "Bitrate" ThunderLAN devices should still be supported (i.e
the older 10Mbps Netflex 3/P, which use the TNETE110 chip that has no
MII support). The ThunderLAN has an internal PHY which makes things a
little complicated, but these are the basic rules:
- For devices with just the ThunderLAN, the internal PHY is used to
provide 10baseT, and 10base5/10baseT support. Autonegotiation will
work, but only with 10baseT links. The only thing that really gets
negotiated is whether the link is full or half duplex.
- For devices with the ThunderLAN and an external 10/100 PHY (like the
Compaq Netelligent 100Mbps cards, or the internal Netflex 3/P with
100Mbps upgrade daughter card), the external PHY is used for 10baseT
and 100baseTX modes. The internal PHY is still used to support
10base5/10base2, though you have to select them manual with ifconfig.
- For devices with the ThunderLAN and the ML6692 PHY, both the internal
and external PHYs are used, though it will appear as though the 6692
PHY will be used to support 10baseT and 100baseTX modes. In reality,
the internal PHY will be used for 10baseT, but this fact will be hidden
from the user. The 10base5/10base2 modes can also be selected manually
as with above.
Diffstat (limited to 'sys')
-rw-r--r-- | sys/pci/if_tl.c | 736 | ||||
-rw-r--r-- | sys/pci/if_tlreg.h | 257 |
2 files changed, 115 insertions, 878 deletions
diff --git a/sys/pci/if_tl.c b/sys/pci/if_tl.c index 688ea42..f24118d 100644 --- a/sys/pci/if_tl.c +++ b/sys/pci/if_tl.c @@ -29,7 +29,7 @@ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * - * $Id: if_tl.c,v 1.34 1999/07/06 19:23:29 des Exp $ + * $Id: if_tl.c,v 1.37 1999/07/23 02:06:56 wpaul Exp $ */ /* @@ -208,6 +208,9 @@ #include <sys/bus.h> #include <sys/rman.h> +#include <dev/mii/mii.h> +#include <dev/mii/miivar.h> + #include <pci/pcireg.h> #include <pci/pcivar.h> @@ -218,13 +221,13 @@ */ #define TL_USEIOSPACE -/* #define TL_BACKGROUND_AUTONEG */ - #include <pci/if_tlreg.h> +#include "miibus_if.h" + #if !defined(lint) static const char rcsid[] = - "$Id: if_tl.c,v 1.34 1999/07/06 19:23:29 des Exp $"; + "$Id: if_tl.c,v 1.37 1999/07/23 02:06:56 wpaul Exp $"; #endif /* @@ -263,26 +266,9 @@ static struct tl_type tl_devs[] = { { 0, 0, NULL } }; -/* - * Various supported PHY vendors/types and their names. Note that - * this driver will work with pretty much any MII-compliant PHY, - * so failure to positively identify the chip is not a fatal error. - */ - -static struct tl_type tl_phys[] = { - { TI_PHY_VENDORID, TI_PHY_10BT, "<TI ThunderLAN 10BT (internal)>" }, - { TI_PHY_VENDORID, TI_PHY_100VGPMI, "<TI TNETE211 100VG Any-LAN>" }, - { NS_PHY_VENDORID, NS_PHY_83840A, "<National Semiconductor DP83840A>"}, - { LEVEL1_PHY_VENDORID, LEVEL1_PHY_LXT970, "<Level 1 LXT970>" }, - { INTEL_PHY_VENDORID, INTEL_PHY_82555, "<Intel 82555>" }, - { SEEQ_PHY_VENDORID, SEEQ_PHY_80220, "<SEEQ 80220>" }, - { 0, 0, "<MII-compliant physical interface>" } -}; - static int tl_probe __P((device_t)); static int tl_attach __P((device_t)); static int tl_detach __P((device_t)); -static int tl_attach_phy __P((struct tl_softc *)); static int tl_intvec_rxeoc __P((void *, u_int32_t)); static int tl_intvec_txeoc __P((void *, u_int32_t)); static int tl_intvec_txeof __P((void *, u_int32_t)); @@ -315,10 +301,10 @@ static void tl_mii_sync __P((struct tl_softc *)); static void tl_mii_send __P((struct tl_softc *, u_int32_t, int)); static int tl_mii_readreg __P((struct tl_softc *, struct tl_mii_frame *)); static int tl_mii_writereg __P((struct tl_softc *, struct tl_mii_frame *)); -static u_int16_t tl_phy_readreg __P((struct tl_softc *, int)); -static void tl_phy_writereg __P((struct tl_softc *, int, int)); +static int tl_miibus_readreg __P((device_t, int, int)); +static int tl_miibus_writereg __P((device_t, int, int, int)); +static void tl_miibus_statchg __P((device_t)); -static void tl_autoneg __P((struct tl_softc *, int, int)); static void tl_setmode __P((struct tl_softc *, int)); static int tl_calchash __P((caddr_t)); static void tl_setmulti __P((struct tl_softc *)); @@ -353,6 +339,16 @@ static device_method_t tl_methods[] = { DEVMETHOD(device_attach, tl_attach), DEVMETHOD(device_detach, tl_detach), DEVMETHOD(device_shutdown, tl_shutdown), + + /* bus interface */ + DEVMETHOD(bus_print_child, bus_generic_print_child), + DEVMETHOD(bus_driver_added, bus_generic_driver_added), + + /* MII interface */ + DEVMETHOD(miibus_readreg, tl_miibus_readreg), + DEVMETHOD(miibus_writereg, tl_miibus_writereg), + DEVMETHOD(miibus_statchg, tl_miibus_statchg), + { 0, 0 } }; @@ -365,6 +361,7 @@ static driver_t tl_driver = { static devclass_t tl_devclass; DRIVER_MODULE(tl, pci, tl_driver, tl_devclass, 0, 0); +DRIVER_MODULE(miibus, tl, miibus_driver, miibus_devclass, 0, 0); static u_int8_t tl_dio_read8(sc, reg) struct tl_softc *sc; @@ -798,341 +795,80 @@ static int tl_mii_writereg(sc, frame) return(0); } -static u_int16_t tl_phy_readreg(sc, reg) - struct tl_softc *sc; - int reg; +static int tl_miibus_readreg(dev, phy, reg) + device_t dev; + int phy, reg; { + struct tl_softc *sc; struct tl_mii_frame frame; + sc = device_get_softc(dev); bzero((char *)&frame, sizeof(frame)); - frame.mii_phyaddr = sc->tl_phy_addr; + frame.mii_phyaddr = phy; frame.mii_regaddr = reg; tl_mii_readreg(sc, &frame); - /* Reenable MII interrupts, just in case. */ - tl_dio_setbit(sc, TL_NETSIO, TL_SIO_MINTEN); - return(frame.mii_data); } -static void tl_phy_writereg(sc, reg, data) - struct tl_softc *sc; - int reg; - int data; +static int tl_miibus_writereg(dev, phy, reg, data) + device_t dev; + int phy, reg, data; { + struct tl_softc *sc; struct tl_mii_frame frame; + sc = device_get_softc(dev); bzero((char *)&frame, sizeof(frame)); - frame.mii_phyaddr = sc->tl_phy_addr; + frame.mii_phyaddr = phy; frame.mii_regaddr = reg; frame.mii_data = data; tl_mii_writereg(sc, &frame); - /* Reenable MII interrupts, just in case. */ - tl_dio_setbit(sc, TL_NETSIO, TL_SIO_MINTEN); - - return; + return(0); } -/* - * Initiate autonegotiation with a link partner. - * - * Note that the Texas Instruments ThunderLAN programmer's guide - * fails to mention one very important point about autonegotiation. - * Autonegotiation is done largely by the PHY, independent of the - * ThunderLAN chip itself: the PHY sets the flags in the BMCR - * register to indicate what modes were selected and if link status - * is good. In fact, the PHY does pretty much all of the work itself, - * except for one small detail. - * - * The PHY may negotiate a full-duplex of half-duplex link, and set - * the PHY_BMCR_DUPLEX bit accordingly, but the ThunderLAN's 'NetCommand' - * register _also_ has a half-duplex/full-duplex bit, and you MUST ALSO - * SET THIS BIT MANUALLY TO CORRESPOND TO THE MODE SELECTED FOR THE PHY! - * In other words, both the ThunderLAN chip and the PHY have to be - * programmed for full-duplex mode in order for full-duplex to actually - * work. So in order for autonegotiation to really work right, we have - * to wait for the link to come up, check the BMCR register, then set - * the ThunderLAN for full or half-duplex as needed. - * - * I struggled for two days to figure this out, so I'm making a point - * of drawing attention to this fact. I think it's very strange that - * the ThunderLAN doesn't automagically track the duplex state of the - * PHY, but there you have it. - * - * Also when, using a National Semiconductor DP83840A PHY, we have to - * allow a full three seconds for autonegotiation to complete. So what - * we do is flip the autonegotiation restart bit, then set a timeout - * to wake us up in three seconds to check the link state. - * - * Note that there are some versions of the Olicom 2326 that use a - * Micro Linear ML6692 100BaseTX PHY. This particular PHY is designed - * to provide 100BaseTX support only, but can be used with a controller - * that supports an internal 10Mbps PHY to provide a complete - * 10/100Mbps solution. However, the ML6692 does not have vendor and - * device ID registers, and hence always shows up with a vendor/device - * ID of 0. - * - * We detect this configuration by checking the phy vendor ID in the - * softc structure. If it's a zero, and we're negotiating a high-speed - * mode, then we turn off the internal PHY. If it's a zero and we've - * negotiated a high-speed mode, we turn on the internal PHY. Note - * that to make things even more fun, we have to make extra sure that - * the loopback bit in the internal PHY's control register is turned - * off. - */ -static void tl_autoneg(sc, flag, verbose) - struct tl_softc *sc; - int flag; - int verbose; +static void tl_miibus_statchg(dev) + device_t dev; { - u_int16_t phy_sts = 0, media = 0, advert, ability; - struct ifnet *ifp; - struct ifmedia *ifm; - - ifm = &sc->ifmedia; - ifp = &sc->arpcom.ac_if; - - /* - * First, see if autoneg is supported. If not, there's - * no point in continuing. - */ - phy_sts = tl_phy_readreg(sc, PHY_BMSR); - if (!(phy_sts & PHY_BMSR_CANAUTONEG)) { - if (verbose) - printf("tl%d: autonegotiation not supported\n", - sc->tl_unit); - return; - } - - switch (flag) { - case TL_FLAG_FORCEDELAY: - /* - * XXX Never use this option anywhere but in the probe - * routine: making the kernel stop dead in its tracks - * for three whole seconds after we've gone multi-user - * is really bad manners. - */ - tl_phy_writereg(sc, PHY_BMCR, PHY_BMCR_RESET); - DELAY(500); - phy_sts = tl_phy_readreg(sc, PHY_BMCR); - phy_sts |= PHY_BMCR_AUTONEGENBL|PHY_BMCR_AUTONEGRSTR; - tl_phy_writereg(sc, PHY_BMCR, phy_sts); - DELAY(5000000); - break; - case TL_FLAG_SCHEDDELAY: - /* - * Wait for the transmitter to go idle before starting - * an autoneg session, otherwise tl_start() may clobber - * our timeout, and we don't want to allow transmission - * during an autoneg session since that can screw it up. - */ - if (!sc->tl_txeoc) { - sc->tl_want_auto = 1; - return; - } - tl_phy_writereg(sc, PHY_BMCR, PHY_BMCR_RESET); - DELAY(500); - phy_sts = tl_phy_readreg(sc, PHY_BMCR); - phy_sts |= PHY_BMCR_AUTONEGENBL|PHY_BMCR_AUTONEGRSTR; - tl_phy_writereg(sc, PHY_BMCR, phy_sts); - ifp->if_timer = 5; - sc->tl_autoneg = 1; - sc->tl_want_auto = 0; - return; - case TL_FLAG_DELAYTIMEO: - ifp->if_timer = 0; - sc->tl_autoneg = 0; - break; - default: - printf("tl%d: invalid autoneg flag: %d\n", sc->tl_unit, flag); - return; - } - - /* - * Read the BMSR register twice: the LINKSTAT bit is a - * latching bit. - */ - tl_phy_readreg(sc, PHY_BMSR); - phy_sts = tl_phy_readreg(sc, PHY_BMSR); - if (phy_sts & PHY_BMSR_AUTONEGCOMP) { - if (verbose) - printf("tl%d: autoneg complete, ", sc->tl_unit); - phy_sts = tl_phy_readreg(sc, PHY_BMSR); - } else { - if (verbose) - printf("tl%d: autoneg not complete, ", sc->tl_unit); - } - - /* Link is good. Report modes and set duplex mode. */ - if (phy_sts & PHY_BMSR_LINKSTAT) { - if (verbose) - printf("link status good "); - - advert = tl_phy_readreg(sc, TL_PHY_ANAR); - ability = tl_phy_readreg(sc, TL_PHY_LPAR); - media = tl_phy_readreg(sc, PHY_BMCR); - - /* - * Be sure to turn off the ISOLATE and - * LOOPBACK bits in the control register, - * otherwise we may not be able to communicate. - */ - media &= ~(PHY_BMCR_LOOPBK|PHY_BMCR_ISOLATE); - /* Set the DUPLEX bit in the NetCmd register accordingly. */ - if (advert & PHY_ANAR_100BT4 && ability & PHY_ANAR_100BT4) { - ifm->ifm_media = IFM_ETHER|IFM_100_T4; - media |= PHY_BMCR_SPEEDSEL; - media &= ~PHY_BMCR_DUPLEX; - if (verbose) - printf("(100baseT4)\n"); - } else if (advert & PHY_ANAR_100BTXFULL && - ability & PHY_ANAR_100BTXFULL) { - ifm->ifm_media = IFM_ETHER|IFM_100_TX|IFM_FDX; - media |= PHY_BMCR_SPEEDSEL; - media |= PHY_BMCR_DUPLEX; - if (verbose) - printf("(full-duplex, 100Mbps)\n"); - } else if (advert & PHY_ANAR_100BTXHALF && - ability & PHY_ANAR_100BTXHALF) { - ifm->ifm_media = IFM_ETHER|IFM_100_TX|IFM_HDX; - media |= PHY_BMCR_SPEEDSEL; - media &= ~PHY_BMCR_DUPLEX; - if (verbose) - printf("(half-duplex, 100Mbps)\n"); - } else if (advert & PHY_ANAR_10BTFULL && - ability & PHY_ANAR_10BTFULL) { - ifm->ifm_media = IFM_ETHER|IFM_10_T|IFM_FDX; - media &= ~PHY_BMCR_SPEEDSEL; - media |= PHY_BMCR_DUPLEX; - if (verbose) - printf("(full-duplex, 10Mbps)\n"); - } else { - ifm->ifm_media = IFM_ETHER|IFM_10_T|IFM_HDX; - media &= ~PHY_BMCR_SPEEDSEL; - media &= ~PHY_BMCR_DUPLEX; - if (verbose) - printf("(half-duplex, 10Mbps)\n"); - } + struct tl_softc *sc; + struct mii_data *mii; - if (media & PHY_BMCR_DUPLEX) - tl_dio_setbit(sc, TL_NETCMD, TL_CMD_DUPLEX); - else - tl_dio_clrbit(sc, TL_NETCMD, TL_CMD_DUPLEX); + sc = device_get_softc(dev); + mii = device_get_softc(sc->tl_miibus); - media &= ~PHY_BMCR_AUTONEGENBL; - tl_phy_writereg(sc, PHY_BMCR, media); + if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) { + tl_dio_setbit(sc, TL_NETCMD, TL_CMD_DUPLEX); } else { - if (verbose) - printf("no carrier\n"); - } - - tl_init(sc); - - if (sc->tl_tx_pend) { - sc->tl_autoneg = 0; - sc->tl_tx_pend = 0; - tl_start(ifp); + tl_dio_clrbit(sc, TL_NETCMD, TL_CMD_DUPLEX); } return; } /* - * Set speed and duplex mode. Also program autoneg advertisements - * accordingly. + * Set modes for bitrate devices. */ static void tl_setmode(sc, media) struct tl_softc *sc; int media; { - u_int16_t bmcr; - - if (sc->tl_bitrate) { - if (IFM_SUBTYPE(media) == IFM_10_5) - tl_dio_setbit(sc, TL_ACOMMIT, TL_AC_MTXD1); - if (IFM_SUBTYPE(media) == IFM_10_T) { - tl_dio_clrbit(sc, TL_ACOMMIT, TL_AC_MTXD1); - if ((media & IFM_GMASK) == IFM_FDX) { - tl_dio_clrbit(sc, TL_ACOMMIT, TL_AC_MTXD3); - tl_dio_setbit(sc, TL_NETCMD, TL_CMD_DUPLEX); - } else { - tl_dio_setbit(sc, TL_ACOMMIT, TL_AC_MTXD3); - tl_dio_clrbit(sc, TL_NETCMD, TL_CMD_DUPLEX); - } - } - return; - } - - bmcr = tl_phy_readreg(sc, PHY_BMCR); - - bmcr &= ~(PHY_BMCR_SPEEDSEL|PHY_BMCR_DUPLEX|PHY_BMCR_AUTONEGENBL| - PHY_BMCR_LOOPBK|PHY_BMCR_ISOLATE); - - if (IFM_SUBTYPE(media) == IFM_LOOP) - bmcr |= PHY_BMCR_LOOPBK; - - if (IFM_SUBTYPE(media) == IFM_AUTO) - bmcr |= PHY_BMCR_AUTONEGENBL; - - /* - * The ThunderLAN's internal PHY has an AUI transceiver - * that can be selected. This is usually attached to a - * 10base2/BNC port. In order to activate this port, we - * have to set the AUISEL bit in the internal PHY's - * special control register. - */ - if (IFM_SUBTYPE(media) == IFM_10_5) { - u_int16_t addr, ctl; - addr = sc->tl_phy_addr; - sc->tl_phy_addr = TL_PHYADDR_MAX; - ctl = tl_phy_readreg(sc, TL_PHY_CTL); - ctl |= PHY_CTL_AUISEL; - tl_phy_writereg(sc, TL_PHY_CTL, ctl); - tl_phy_writereg(sc, PHY_BMCR, bmcr); - sc->tl_phy_addr = addr; - bmcr |= PHY_BMCR_ISOLATE; - } else { - u_int16_t addr, ctl; - addr = sc->tl_phy_addr; - sc->tl_phy_addr = TL_PHYADDR_MAX; - ctl = tl_phy_readreg(sc, TL_PHY_CTL); - ctl &= ~PHY_CTL_AUISEL; - tl_phy_writereg(sc, TL_PHY_CTL, ctl); - tl_phy_writereg(sc, PHY_BMCR, PHY_BMCR_ISOLATE); - sc->tl_phy_addr = addr; - bmcr &= ~PHY_BMCR_ISOLATE; - } - - if (IFM_SUBTYPE(media) == IFM_100_TX) { - bmcr |= PHY_BMCR_SPEEDSEL; - if ((media & IFM_GMASK) == IFM_FDX) { - bmcr |= PHY_BMCR_DUPLEX; - tl_dio_setbit(sc, TL_NETCMD, TL_CMD_DUPLEX); - } else { - bmcr &= ~PHY_BMCR_DUPLEX; - tl_dio_clrbit(sc, TL_NETCMD, TL_CMD_DUPLEX); - } - } - + if (IFM_SUBTYPE(media) == IFM_10_5) + tl_dio_setbit(sc, TL_ACOMMIT, TL_AC_MTXD1); if (IFM_SUBTYPE(media) == IFM_10_T) { - bmcr &= ~PHY_BMCR_SPEEDSEL; + tl_dio_clrbit(sc, TL_ACOMMIT, TL_AC_MTXD1); if ((media & IFM_GMASK) == IFM_FDX) { - bmcr |= PHY_BMCR_DUPLEX; + tl_dio_clrbit(sc, TL_ACOMMIT, TL_AC_MTXD3); tl_dio_setbit(sc, TL_NETCMD, TL_CMD_DUPLEX); } else { - bmcr &= ~PHY_BMCR_DUPLEX; + tl_dio_setbit(sc, TL_ACOMMIT, TL_AC_MTXD3); tl_dio_clrbit(sc, TL_NETCMD, TL_CMD_DUPLEX); } } - tl_phy_writereg(sc, PHY_BMCR, bmcr); - - tl_init(sc); - return; } @@ -1263,9 +999,9 @@ static void tl_setmulti(sc) static void tl_hardreset(sc) struct tl_softc *sc; { +#ifdef foo int i; u_int16_t old_addr, flags; - old_addr = sc->tl_phy_addr; for (i = 0; i < TL_PHYADDR_MAX + 1; i++) { @@ -1292,7 +1028,7 @@ static void tl_hardreset(sc) while(tl_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_RESET); sc->tl_phy_addr = old_addr; - +#endif return; } @@ -1389,156 +1125,10 @@ static int tl_probe(dev) return(ENXIO); } -/* - * Do the interface setup and attach for a PHY on a particular - * ThunderLAN chip. Also also set up interrupt vectors. - */ -static int tl_attach_phy(sc) - struct tl_softc *sc; -{ - int phy_ctl; - struct tl_type *p = tl_phys; - int media = IFM_ETHER|IFM_100_TX|IFM_FDX; - struct ifnet *ifp; - - ifp = &sc->arpcom.ac_if; - - sc->tl_phy_did = tl_phy_readreg(sc, TL_PHY_DEVID); - sc->tl_phy_vid = tl_phy_readreg(sc, TL_PHY_VENID); - sc->tl_phy_sts = tl_phy_readreg(sc, TL_PHY_GENSTS); - phy_ctl = tl_phy_readreg(sc, TL_PHY_GENCTL); - - /* - * PHY revision numbers tend to vary a bit. Our algorithm here - * is to check everything but the 8 least significant bits. - */ - while(p->tl_vid) { - if (sc->tl_phy_vid == p->tl_vid && - (sc->tl_phy_did | 0x000F) == p->tl_did) { - sc->tl_pinfo = p; - break; - } - p++; - } - if (sc->tl_pinfo == NULL) { - sc->tl_pinfo = &tl_phys[PHY_UNKNOWN]; - } - - if (sc->tl_phy_sts & PHY_BMSR_100BT4 || - sc->tl_phy_sts & PHY_BMSR_100BTXFULL || - sc->tl_phy_sts & PHY_BMSR_100BTXHALF) - ifp->if_baudrate = 100000000; - else - ifp->if_baudrate = 10000000; - - if (bootverbose) { - printf("tl%d: phy at mii address %d\n", sc->tl_unit, - sc->tl_phy_addr); - - printf("tl%d: %s ", sc->tl_unit, sc->tl_pinfo->tl_name); - } - - if (sc->tl_phy_sts & PHY_BMSR_100BT4 || - sc->tl_phy_sts & PHY_BMSR_100BTXHALF || - sc->tl_phy_sts & PHY_BMSR_100BTXHALF) { - if (bootverbose) - printf("10/100Mbps "); - } else { - media &= ~IFM_100_TX; - media |= IFM_10_T; - if (bootverbose) - printf("10Mbps "); - } - - if (sc->tl_phy_sts & PHY_BMSR_100BTXFULL || - sc->tl_phy_sts & PHY_BMSR_10BTFULL) { - if (bootverbose) - printf("full duplex "); - } else { - if (bootverbose) - printf("half duplex "); - media &= ~IFM_FDX; - } - - if (sc->tl_phy_sts & PHY_BMSR_CANAUTONEG) { - media = IFM_ETHER|IFM_AUTO; - if (bootverbose) - printf("autonegotiating\n"); - } else - if (bootverbose) - printf("\n"); - - /* If this isn't a known PHY, print the PHY indentifier info. */ - if (sc->tl_pinfo->tl_vid == 0 && bootverbose) - printf("tl%d: vendor id: %04x product id: %04x\n", - sc->tl_unit, sc->tl_phy_vid, sc->tl_phy_did); - - /* Set up ifmedia data and callbacks. */ - ifmedia_init(&sc->ifmedia, 0, tl_ifmedia_upd, tl_ifmedia_sts); - - /* - * All ThunderLANs support at least 10baseT half duplex. - * They also support AUI selection if used in 10Mb/s modes. - */ - ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T|IFM_HDX, 0, NULL); - ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL); - ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_5, 0, NULL); - - /* Some ThunderLAN PHYs support autonegotiation. */ - if (sc->tl_phy_sts & PHY_BMSR_CANAUTONEG) - ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL); - - /* Some support 10baseT full duplex. */ - if (sc->tl_phy_sts & PHY_BMSR_10BTFULL) - ifmedia_add(&sc->ifmedia, - IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL); - - /* Some support 100BaseTX half duplex. */ - if (sc->tl_phy_sts & PHY_BMSR_100BTXHALF) - ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX, 0, NULL); - if (sc->tl_phy_sts & PHY_BMSR_100BTXHALF) - ifmedia_add(&sc->ifmedia, - IFM_ETHER|IFM_100_TX|IFM_HDX, 0, NULL); - - /* Some support 100BaseTX full duplex. */ - if (sc->tl_phy_sts & PHY_BMSR_100BTXFULL) - ifmedia_add(&sc->ifmedia, - IFM_ETHER|IFM_100_TX|IFM_FDX, 0, NULL); - - /* Some also support 100BaseT4. */ - if (sc->tl_phy_sts & PHY_BMSR_100BT4) - ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_T4, 0, NULL); - - /* Set default media. */ - ifmedia_set(&sc->ifmedia, media); - - /* - * Kick off an autonegotiation session if this PHY supports it. - * This is necessary to make sure the chip's duplex mode matches - * the PHY's duplex mode. It may not: once enabled, the PHY may - * autonegotiate full-duplex mode with its link partner, but the - * ThunderLAN chip defaults to half-duplex and stays there unless - * told otherwise. - */ - if (sc->tl_phy_sts & PHY_BMSR_CANAUTONEG) { - tl_init(sc); -#ifdef TL_BACKGROUND_AUTONEG - tl_autoneg(sc, TL_FLAG_SCHEDDELAY, 1); -#else - if (cold) - tl_autoneg(sc, TL_FLAG_FORCEDELAY, 1); - else - tl_autoneg(sc, TL_FLAG_SCHEDDELAY, 1); -#endif - } - - return(0); -} - static int tl_attach(dev) device_t dev; { - int s, i, phys = 0; + int s, i; u_int32_t command; u_int16_t did, vid; struct tl_type *t; @@ -1773,43 +1363,12 @@ static int tl_attach(dev) tl_softreset(sc, 1); /* - * Now attach the ThunderLAN's PHYs. There will always - * be at least one PHY; if the PHY address is 0x1F, then - * it's the internal one. + * Do MII setup. If no PHYs are found, then this is a + * bitrate ThunderLAN chip that only supports 10baseT + * and AUI/BNC. */ - - for (i = TL_PHYADDR_MIN; i < TL_PHYADDR_MAX + 1; i++) { - sc->tl_phy_addr = i; - if (bootverbose) - printf("tl%d: looking for phy at addr %x\n", unit, i); - tl_phy_writereg(sc, PHY_BMCR, PHY_BMCR_RESET); - DELAY(500); - while(tl_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_RESET); - sc->tl_phy_sts = tl_phy_readreg(sc, PHY_BMSR); - if (bootverbose) - printf("tl%d: status: %x\n", unit, sc->tl_phy_sts); - if (!sc->tl_phy_sts) - continue; - if (tl_attach_phy(sc)) { - bus_teardown_intr(dev, sc->tl_irq, sc->tl_intrhand); - bus_release_resource(dev, SYS_RES_IRQ, 0, sc->tl_irq); - bus_release_resource(dev, TL_RES, TL_RID, sc->tl_res); - free(sc->tl_ldata_ptr, M_DEVBUF); - printf("tl%d: failed to attach a phy %d\n", unit, i); - error = ENXIO; - goto fail; - } - phys++; - if (phys && i != TL_PHYADDR_MAX) - break; - } - - /* - * If no MII-based PHYs were detected, then this is a - * TNETE110 device with a bit rate PHY. There's no autoneg - * support, so just default to 10baseT mode. - */ - if (!phys) { + if (mii_phy_probe(dev, &sc->tl_miibus, + tl_ifmedia_upd, tl_ifmedia_sts)) { struct ifmedia *ifm; sc->tl_bitrate = 1; ifmedia_init(&sc->ifmedia, 0, tl_ifmedia_upd, tl_ifmedia_sts); @@ -1825,15 +1384,6 @@ static int tl_attach(dev) tl_ifmedia_upd(ifp); } - tl_intvec_adchk((void *)sc, 0); - tl_stop(sc); - - /* - * Attempt to clear any stray interrupts - * that may be lurking. - */ - tl_intr((void *)sc); - /* * Call MI attach routines. */ @@ -1864,8 +1414,12 @@ static int tl_detach(dev) tl_stop(sc); if_detach(ifp); + bus_generic_detach(dev); + device_delete_child(dev, sc->tl_miibus); + free(sc->tl_ldata_ptr, M_DEVBUF); - ifmedia_removeall(&sc->ifmedia); + if (sc->tl_bitrate) + ifmedia_removeall(&sc->ifmedia); bus_teardown_intr(dev, sc->tl_irq, sc->tl_intrhand); bus_release_resource(dev, SYS_RES_IRQ, 0, sc->tl_irq); @@ -2171,16 +1725,6 @@ static int tl_intvec_txeoc(xsc, type) ifp->if_flags &= ~IFF_OACTIVE; sc->tl_cdata.tl_tx_tail = NULL; sc->tl_txeoc = 1; - /* - * If we just drained the TX queue and - * there's an autoneg request waiting, set - * it in motion. This will block the transmitter - * until the autoneg session completes which will - * no doubt piss off any processes waiting to - * transmit, but that's the way the ball bounces. - */ - if (sc->tl_want_auto) - tl_autoneg(sc, TL_FLAG_SCHEDDELAY, 1); } else { sc->tl_txeoc = 0; /* First we have to ack the EOC interrupt. */ @@ -2204,7 +1748,6 @@ static int tl_intvec_adchk(xsc, type) u_int32_t type; { struct tl_softc *sc; - u_int16_t bmcr, ctl; sc = xsc; @@ -2212,24 +1755,7 @@ static int tl_intvec_adchk(xsc, type) printf("tl%d: adapter check: %x\n", sc->tl_unit, (unsigned int)CSR_READ_4(sc, TL_CH_PARM)); - /* - * Before resetting the adapter, try reading the PHY - * settings so we can put them back later. This is - * necessary to keep the chip operating at the same - * speed and duplex settings after the reset completes. - */ - if (!sc->tl_bitrate) { - bmcr = tl_phy_readreg(sc, PHY_BMCR); - ctl = tl_phy_readreg(sc, TL_PHY_CTL); tl_softreset(sc, 1); - tl_phy_writereg(sc, PHY_BMCR, bmcr); - tl_phy_writereg(sc, TL_PHY_CTL, ctl); - if (bmcr & PHY_BMCR_DUPLEX) { - tl_dio_setbit(sc, TL_NETCMD, TL_CMD_DUPLEX); - } else { - tl_dio_clrbit(sc, TL_NETCMD, TL_CMD_DUPLEX); - } - } tl_stop(sc); tl_init(sc); CMD_SET(sc, TL_CMD_INTSON); @@ -2332,6 +1858,7 @@ static void tl_stats_update(xsc) struct tl_softc *sc; struct ifnet *ifp; struct tl_stats tl_stats; + struct mii_data *mii; u_int32_t *p; int s; @@ -2361,6 +1888,11 @@ static void tl_stats_update(xsc) sc->tl_stat_ch = timeout(tl_stats_update, sc, hz); + if (!sc->tl_bitrate) { + mii = device_get_softc(sc->tl_miibus); + mii_tick(mii); + } + splx(s); return; @@ -2477,11 +2009,6 @@ static void tl_start(ifp) sc = ifp->if_softc; - if (sc->tl_autoneg) { - sc->tl_tx_pend = 1; - return; - } - /* * Check for an available queue slot. If there are none, * punt. @@ -2568,10 +2095,7 @@ static void tl_init(xsc) struct tl_softc *sc = xsc; struct ifnet *ifp = &sc->arpcom.ac_if; int s; - u_int16_t phy_sts; - - if (sc->tl_autoneg) - return; + struct mii_data *mii; s = splimp(); @@ -2615,16 +2139,6 @@ static void tl_init(xsc) /* Init TX pointers. */ tl_list_tx_init(sc); - /* - * Enable PHY interrupts. - */ - phy_sts = tl_phy_readreg(sc, TL_PHY_CTL); - phy_sts |= PHY_CTL_INTEN; - tl_phy_writereg(sc, TL_PHY_CTL, phy_sts); - - /* Enable MII interrupts. */ - tl_dio_setbit(sc, TL_NETSIO, TL_SIO_MINTEN); - /* Enable PCI interrupts. */ CMD_SET(sc, TL_CMD_INTSON); @@ -2632,29 +2146,12 @@ static void tl_init(xsc) CMD_SET(sc, TL_CMD_RT); CSR_WRITE_4(sc, TL_CH_PARM, vtophys(&sc->tl_ldata->tl_rx_list[0])); - /* - * XXX This is a kludge to handle adapters with the Micro Linear - * ML6692 100BaseTX PHY, which only supports 100Mbps modes and - * relies on the controller's internal 10Mbps PHY to provide - * 10Mbps modes. The ML6692 always shows up with a vendor/device ID - * of 0 (it doesn't actually have vendor/device ID registers) - * so we use that property to detect it. In theory there ought to - * be a better way to 'spot the looney' but I can't find one. - */ - if (!sc->tl_phy_vid) { - u_int8_t addr = 0; - u_int16_t bmcr; - - bmcr = tl_phy_readreg(sc, PHY_BMCR); - addr = sc->tl_phy_addr; - sc->tl_phy_addr = TL_PHYADDR_MAX; - tl_phy_writereg(sc, PHY_BMCR, PHY_BMCR_RESET); - if (bmcr & PHY_BMCR_SPEEDSEL) - tl_phy_writereg(sc, PHY_BMCR, PHY_BMCR_ISOLATE); - else - tl_phy_writereg(sc, PHY_BMCR, bmcr); - sc->tl_phy_addr = addr; - } + if (!sc->tl_bitrate) { + if (sc->tl_miibus != NULL) { + mii = device_get_softc(sc->tl_miibus); + mii_mediachg(mii); + } + } /* Send the RX go command */ CMD_SET(sc, TL_CMD_GO|TL_CMD_RT); @@ -2677,18 +2174,16 @@ static int tl_ifmedia_upd(ifp) struct ifnet *ifp; { struct tl_softc *sc; - struct ifmedia *ifm; + struct mii_data *mii = NULL; sc = ifp->if_softc; - ifm = &sc->ifmedia; - - if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) - return(EINVAL); - if (IFM_SUBTYPE(ifm->ifm_media) == IFM_AUTO) - tl_autoneg(sc, TL_FLAG_SCHEDDELAY, 1); - else - tl_setmode(sc, ifm->ifm_media); + if (sc->tl_bitrate) + tl_setmode(sc, sc->ifmedia.ifm_media); + else { + mii = device_get_softc(sc->tl_miibus); + mii_mediachg(mii); + } return(0); } @@ -2700,9 +2195,8 @@ static void tl_ifmedia_sts(ifp, ifmr) struct ifnet *ifp; struct ifmediareq *ifmr; { - u_int16_t phy_ctl; - u_int16_t phy_sts; struct tl_softc *sc; + struct mii_data *mii; sc = ifp->if_softc; @@ -2718,28 +2212,11 @@ static void tl_ifmedia_sts(ifp, ifmr) else ifmr->ifm_active |= IFM_FDX; return; - } - - phy_ctl = tl_phy_readreg(sc, PHY_BMCR); - phy_sts = tl_phy_readreg(sc, TL_PHY_CTL); - - if (phy_sts & PHY_CTL_AUISEL) - ifmr->ifm_active = IFM_ETHER|IFM_10_5; - - if (phy_ctl & PHY_BMCR_LOOPBK) - ifmr->ifm_active = IFM_ETHER|IFM_LOOP; - - if (phy_ctl & PHY_BMCR_SPEEDSEL) - ifmr->ifm_active = IFM_ETHER|IFM_100_TX; - else - ifmr->ifm_active = IFM_ETHER|IFM_10_T; - - if (phy_ctl & PHY_BMCR_DUPLEX) { - ifmr->ifm_active |= IFM_FDX; - ifmr->ifm_active &= ~IFM_HDX; } else { - ifmr->ifm_active &= ~IFM_FDX; - ifmr->ifm_active |= IFM_HDX; + mii = device_get_softc(sc->tl_miibus); + mii_pollstat(mii); + ifmr->ifm_active = mii->mii_media_active; + ifmr->ifm_status = mii->mii_media_status; } return; @@ -2764,12 +2241,24 @@ static int tl_ioctl(ifp, command, data) break; case SIOCSIFFLAGS: if (ifp->if_flags & IFF_UP) { - tl_init(sc); + if (ifp->if_flags & IFF_RUNNING && + ifp->if_flags & IFF_PROMISC && + !(sc->tl_if_flags & IFF_PROMISC)) { + tl_dio_setbit(sc, TL_NETCMD, TL_CMD_CAF); + tl_setmulti(sc); + } else if (ifp->if_flags & IFF_RUNNING && + !(ifp->if_flags & IFF_PROMISC) && + sc->tl_if_flags & IFF_PROMISC) { + tl_dio_clrbit(sc, TL_NETCMD, TL_CMD_CAF); + tl_setmulti(sc); + } else + tl_init(sc); } else { if (ifp->if_flags & IFF_RUNNING) { tl_stop(sc); } } + sc->tl_if_flags = ifp->if_flags; error = 0; break; case SIOCADDMULTI: @@ -2779,7 +2268,14 @@ static int tl_ioctl(ifp, command, data) break; case SIOCSIFMEDIA: case SIOCGIFMEDIA: - error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, command); + if (sc->tl_bitrate) + error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, command); + else { + struct mii_data *mii; + mii = device_get_softc(sc->tl_miibus); + error = ifmedia_ioctl(ifp, ifr, + &mii->mii_media, command); + } break; default: error = EINVAL; @@ -2795,15 +2291,11 @@ static void tl_watchdog(ifp) struct ifnet *ifp; { struct tl_softc *sc; - u_int16_t bmsr; sc = ifp->if_softc; - if (sc->tl_autoneg) { - tl_autoneg(sc, TL_FLAG_DELAYTIMEO, 1); - return; - } - +#ifdef foo + u_int16_t bmsr; /* Check that we're still connected. */ tl_phy_readreg(sc, PHY_BMSR); bmsr = tl_phy_readreg(sc, PHY_BMSR); @@ -2811,7 +2303,8 @@ static void tl_watchdog(ifp) printf("tl%d: no carrier\n", sc->tl_unit); tl_autoneg(sc, TL_FLAG_SCHEDDELAY, 1); } else - printf("tl%d: device timeout\n", sc->tl_unit); +#endif + printf("tl%d: device timeout\n", sc->tl_unit); ifp->if_oerrors++; @@ -2851,11 +2344,6 @@ static void tl_stop(sc) CMD_SET(sc, TL_CMD_INTSOFF); /* - * Disable MII interrupts. - */ - tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_MINTEN); - - /* * Clear list pointer. */ CSR_WRITE_4(sc, TL_CH_PARM, 0); diff --git a/sys/pci/if_tlreg.h b/sys/pci/if_tlreg.h index 6047dfc..e9ef74d 100644 --- a/sys/pci/if_tlreg.h +++ b/sys/pci/if_tlreg.h @@ -29,7 +29,7 @@ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * - * $Id: if_tlreg.h,v 1.11 1999/07/23 02:06:57 wpaul Exp $ + * $Id: if_tlreg.h,v 1.12 1999/07/23 02:17:59 wpaul Exp $ */ @@ -116,23 +116,16 @@ struct tl_softc { void *tl_intrhand; struct resource *tl_irq; struct resource *tl_res; + device_t tl_miibus; struct tl_type *tl_dinfo; /* ThunderLAN adapter info */ - struct tl_type *tl_pinfo; /* PHY info struct */ - u_int8_t tl_ctlr; /* chip number */ u_int8_t tl_unit; /* interface number */ u_int8_t tl_eeaddr; - u_int8_t tl_phy_addr; /* PHY address */ - u_int8_t tl_tx_pend; /* TX pending */ - u_int8_t tl_want_auto; /* autoneg scheduled */ - u_int8_t tl_autoneg; /* autoneg in progress */ - u_int16_t tl_phy_sts; /* PHY status */ - u_int16_t tl_phy_vid; /* PHY vendor ID */ - u_int16_t tl_phy_did; /* PHY device ID */ caddr_t tl_ldata_ptr; struct tl_list_data *tl_ldata; /* TX/RX lists and mbufs */ struct tl_chain_data tl_cdata; u_int8_t tl_txeoc; u_int8_t tl_bitrate; + int tl_if_flags; struct callout_handle tl_stat_ch; }; @@ -141,20 +134,6 @@ struct tl_softc { */ #define TX_THR 0x00000004 -#define TL_FLAG_FORCEDELAY 1 -#define TL_FLAG_SCHEDDELAY 2 -#define TL_FLAG_DELAYTIMEO 3 - -/* - * The ThunderLAN supports up to 32 PHYs. - */ -#define TL_PHYADDR_MIN 0x00 -#define TL_PHYADDR_MAX 0x1F - -#define PHY_UNKNOWN 6 - -#define TL_PHYS_IDLE -1 - /* * General constants that are fun to know. * @@ -167,65 +146,6 @@ struct tl_softc { #define TI_DEVICEID_THUNDERLAN 0x0500 /* - * Known PHY Ids. According to the Level 1 documentation (which is - * very nice, incidentally), here's how they work: - * - * The PHY identifier register #1 is composed of bits 3 through 18 - * of the OUI. (First 16-bit word.) - * The PHY identifier register #2 is composed of bits 19 through 24 - * if the OUI. - * This is followed by 6 bits containing the manufacturer's model - * number. - * Lastly, there are 4 bits for the manufacturer's revision number. - * - * Honestly, there are a lot of these that don't make any sense; the - * only way to be really sure is to look at the data sheets. - */ - -/* - * Texas Instruments PHY identifiers - * - * The ThunderLAN manual has a curious and confusing error in it. - * In chapter 7, which describes PHYs, it says that TI PHYs have - * the following ID codes, where xx denotes a revision: - * - * 0x4000501xx internal 10baseT PHY - * 0x4000502xx TNETE211 100VG-AnyLan PMI - * - * The problem here is that these are not valid 32-bit hex numbers: - * there's one digit too many. My guess is that they mean the internal - * 10baseT PHY is 0x4000501x and the TNETE211 is 0x4000502x since these - * are the only numbers that make sense. - */ -#define TI_PHY_VENDORID 0x4000 -#define TI_PHY_10BT 0x501F -#define TI_PHY_100VGPMI 0x502F - -/* - * These ID values are for the NS DP83840A 10/100 PHY - */ -#define NS_PHY_VENDORID 0x2000 -#define NS_PHY_83840A 0x5C0F - -/* - * Level 1 10/100 PHY - */ -#define LEVEL1_PHY_VENDORID 0x7810 -#define LEVEL1_PHY_LXT970 0x000F - -/* - * Intel 82555 10/100 PHY - */ -#define INTEL_PHY_VENDORID 0x0A28 -#define INTEL_PHY_82555 0x015F - -/* - * SEEQ 80220 10/100 PHY - */ -#define SEEQ_PHY_VENDORID 0x0016 -#define SEEQ_PHY_80220 0xF83F - -/* * These are the PCI vendor and device IDs for Compaq ethernet * adapters based on the ThunderLAN controller. */ @@ -634,177 +554,6 @@ struct tl_stats { /* - * These are the register definitions for the PHY (physical layer - * interface chip). - * The ThunderLAN chip has a built-in 10Mb/sec PHY which may be used - * in some configurations. The Compaq 10/100 cards based on the ThunderLAN - * use a National Semiconductor DP83840A PHY. The generic BMCR and BMSR - * layouts for both PHYs are identical, however some of the bits are not - * used by the ThunderLAN's internal PHY (most notably those dealing with - * switching between 10 and 100Mb/sec speeds). Since Both PHYs use the - * same bits, we #define them with generic names here. - */ -/* - * PHY BMCR Basic Mode Control Register - */ -#define PHY_BMCR 0x00 -#define PHY_BMCR_RESET 0x8000 -#define PHY_BMCR_LOOPBK 0x4000 -#define PHY_BMCR_SPEEDSEL 0x2000 -#define PHY_BMCR_AUTONEGENBL 0x1000 -#define PHY_BMCR_RSVD0 0x0800 /* write as zero */ -#define PHY_BMCR_PWRDOWN 0x0800 /* tlan internal PHY only */ -#define PHY_BMCR_ISOLATE 0x0400 -#define PHY_BMCR_AUTONEGRSTR 0x0200 -#define PHY_BMCR_DUPLEX 0x0100 -#define PHY_BMCR_COLLTEST 0x0080 -#define PHY_BMCR_RSVD1 0x0040 /* write as zero, don't care */ -#define PHY_BMCR_RSVD2 0x0020 /* write as zero, don't care */ -#define PHY_BMCR_RSVD3 0x0010 /* write as zero, don't care */ -#define PHY_BMCR_RSVD4 0x0008 /* write as zero, don't care */ -#define PHY_BMCR_RSVD5 0x0004 /* write as zero, don't care */ -#define PHY_BMCR_RSVD6 0x0002 /* write as zero, don't care */ -#define PHY_BMCR_RSVD7 0x0001 /* write as zero, don't care */ -/* - * RESET: 1 == software reset, 0 == normal operation - * Resets status and control registers to default values. - * Relatches all hardware config values. - * - * LOOPBK: 1 == loopback operation enabled, 0 == normal operation - * - * SPEEDSEL: 1 == 100Mb/s, 0 == 10Mb/s - * Link speed is selected byt his bit or if auto-negotiation if bit - * 12 (AUTONEGENBL) is set (in which case the value of this register - * is ignored). - * - * AUTONEGENBL: 1 == Autonegotiation enabled, 0 == Autonegotiation disabled - * Bits 8 and 13 are ignored when autoneg is set, otherwise bits 8 and 13 - * determine speed and mode. Should be cleared and then set if PHY configured - * for no autoneg on startup. - * - * ISOLATE: 1 == isolate PHY from MII, 0 == normal operation - * - * AUTONEGRSTR: 1 == restart autonegotiation, 0 = normal operation - * - * DUPLEX: 1 == full duplex mode, 0 == half duplex mode - * - * COLLTEST: 1 == collision test enabled, 0 == normal operation - */ - -/* - * PHY, BMSR Basic Mode Status Register - */ -#define PHY_BMSR 0x01 -#define PHY_BMSR_100BT4 0x8000 -#define PHY_BMSR_100BTXFULL 0x4000 -#define PHY_BMSR_100BTXHALF 0x2000 -#define PHY_BMSR_10BTFULL 0x1000 -#define PHY_BMSR_10BTHALF 0x0800 -#define PHY_BMSR_RSVD1 0x0400 /* write as zero, don't care */ -#define PHY_BMSR_RSVD2 0x0200 /* write as zero, don't care */ -#define PHY_BMSR_RSVD3 0x0100 /* write as zero, don't care */ -#define PHY_BMSR_RSVD4 0x0080 /* write as zero, don't care */ -#define PHY_BMSR_MFPRESUP 0x0040 -#define PHY_BMSR_AUTONEGCOMP 0x0020 -#define PHY_BMSR_REMFAULT 0x0010 -#define PHY_BMSR_CANAUTONEG 0x0008 -#define PHY_BMSR_LINKSTAT 0x0004 -#define PHY_BMSR_JABBER 0x0002 -#define PHY_BMSR_EXTENDED 0x0001 - -#define PHY_CTL_IGLINK 0x8000 -#define PHY_CTL_SWAPOL 0x4000 -#define PHY_CTL_AUISEL 0x2000 -#define PHY_CTL_SQEEN 0x1000 -#define PHY_CTL_MTEST 0x0800 -#define PHY_CTL_NFEW 0x0004 -#define PHY_CTL_INTEN 0x0002 -#define PHY_CTL_TINT 0x0001 - -#define TL_PHY_GENCTL 0x00 -#define TL_PHY_GENSTS 0x01 - -/* - * PHY Generic Identifier Register, hi bits - */ -#define TL_PHY_VENID 0x02 - -/* - * PHY Generic Identifier Register, lo bits - */ -#define TL_PHY_DEVID 0x03 - -#define TL_PHY_ANAR 0x04 -#define TL_PHY_LPAR 0x05 -#define TL_PHY_ANEXP 0x06 - -#define TL_PHY_PHYID 0x10 -#define TL_PHY_CTL 0x11 -#define TL_PHY_STS 0x12 - -#define TL_LPAR_RMFLT 0x2000 -#define TL_LPAR_RSVD0 0x1000 -#define TL_LPAR_RSVD1 0x0800 -#define TL_LPAR_100BT4 0x0400 -#define TL_LPAR_100BTXFULL 0x0200 -#define TL_LPAR_100BTXHALF 0x0100 -#define TL_LPAR_10BTFULL 0x0080 -#define TL_LPAR_10BTHALF 0x0040 - -/* - * PHY Antoneg advertisement register. - */ -#define PHY_ANAR TL_PHY_ANAR -#define PHY_ANAR_NEXTPAGE 0x8000 -#define PHY_ANAR_RSVD0 0x4000 -#define PHY_ANAR_TLRFLT 0x2000 -#define PHY_ANAR_RSVD1 0x1000 -#define PHY_RSVD_RSDV2 0x0800 -#define PHY_RSVD_RSVD3 0x0400 -#define PHY_ANAR_100BT4 0x0200 -#define PHY_ANAR_100BTXFULL 0x0100 -#define PHY_ANAR_100BTXHALF 0x0080 -#define PHY_ANAR_10BTFULL 0x0040 -#define PHY_ANAR_10BTHALF 0x0020 -#define PHY_ANAR_PROTO4 0x0010 -#define PHY_ANAR_PROTO3 0x0008 -#define PHY_ANAR_PROTO2 0x0004 -#define PHY_AHAR_PROTO1 0x0002 -#define PHY_AHAR_PROTO0 0x0001 - -/* - * DP83840 PHY, PCS Confifguration Register - */ -#define TL_DP83840_PCS 0x17 -#define TL_DP83840_PCS_LED4_MODE 0x0002 -#define TL_DP83840_PCS_F_CONNECT 0x0020 -#define TL_DP83840_PCS_BIT8 0x0100 -#define TL_DP83840_PCS_BIT10 0x0400 - -/* - * DP83840 PHY, PAR register - */ -#define TL_DP83840_PAR 0x19 - -#define PAR_RSVD0 0x8000 -#define PAR_RSVD1 0x4000 -#define PAR_RSVD2 0x2000 -#define PAR_RSVD3 0x1000 -#define PAR_DIS_CRS_JAB 0x0800 -#define PAR_AN_EN_STAT 0x0400 -#define PAR_RSVD4 0x0200 -#define PAR_FEFI_EN 0x0100 -#define PAR_DUPLEX_STAT 0x0080 -#define PAR_SPEED_10 0x0040 -#define PAR_CIM_STATUS 0x0020 -#define PAR_PHYADDR4 0x0010 -#define PAR_PHYADDR3 0x0008 -#define PAR_PHYADDR2 0x0004 -#define PAR_PHYADDR1 0x0002 -#define PAR_PHYADDR0 0x0001 - - -/* * Microchip Technology 24Cxx EEPROM control bytes */ #define EEPROM_CTL_READ 0xA1 /* 0101 0001 */ |