diff options
author | kato <kato@FreeBSD.org> | 1997-08-21 08:34:47 +0000 |
---|---|---|
committer | kato <kato@FreeBSD.org> | 1997-08-21 08:34:47 +0000 |
commit | 95c812f7d496c1371480f79055d2600186581a8d (patch) | |
tree | 9fff5984396e62fdc043df228b6c49e5573ba1e6 /sys | |
parent | 3a47df38a22c563d57ae36f6878ab164d0de81b6 (diff) | |
download | FreeBSD-src-95c812f7d496c1371480f79055d2600186581a8d.zip FreeBSD-src-95c812f7d496c1371480f79055d2600186581a8d.tar.gz |
3c509.c was identical to kzipboot/unzip.c. I just copied it from
i386/boot/netboot/3c509.c. PC-98 support will be added near future.
Submitted by: Tor Egge <Tor.Egge@idi.ntnu.no>
Diffstat (limited to 'sys')
-rw-r--r-- | sys/pc98/boot/netboot/3c509.c | 699 |
1 files changed, 573 insertions, 126 deletions
diff --git a/sys/pc98/boot/netboot/3c509.c b/sys/pc98/boot/netboot/3c509.c index 93a2c8b..adf721c 100644 --- a/sys/pc98/boot/netboot/3c509.c +++ b/sys/pc98/boot/netboot/3c509.c @@ -1,155 +1,602 @@ -/* - * unzip.c -- decompress files in gzip or pkzip format. - * Copyright (C) 1992-1993 Jean-loup Gailly - * - * Adapted for Linux booting by Hannu Savolainen 1993 - * Adapted for FreeBSD booting by Serge Vakulenko - * - * This is free software; you can redistribute it and/or modify it under the - * terms of the GNU General Public License, see the file COPYING. - * - * The code in this file is derived from the file funzip.c written - * and put in the public domain by Mark Adler. - */ +/************************************************************************** +NETBOOT - BOOTP/TFTP Bootstrap Program -/* - * This version can extract files in gzip or pkzip format. - * For the latter, only the first entry is extracted, and it has to be - * either deflated or stored. - */ +Author: Martin Renters. + Date: Mar 22 1995 -#include "gzip.h" - -#include <sys/types.h> -#include <sys/inflate.h> - -/* PKZIP header definitions */ -#define LOCSIG 0x04034b50L /* four-byte lead-in (lsb first) */ -#define LOCFLG 6 /* offset of bit flag */ -#define CRPFLG 1 /* bit for encrypted entry */ -#define EXTFLG 8 /* bit for extended local header */ -#define LOCHOW 8 /* offset of compression method */ -#define LOCTIM 10 /* file mod time (for decryption) */ -#define LOCCRC 14 /* offset of crc */ -#define LOCSIZ 18 /* offset of compressed size */ -#define LOCLEN 22 /* offset of uncompressed length */ -#define LOCFIL 26 /* offset of file name field length */ -#define LOCEXT 28 /* offset of extra field length */ -#define LOCHDR 30 /* size of local header, including sig */ -#define EXTHDR 16 /* size of extended local header, inc sig */ - -int pkzip; /* set for a pkzip file */ -int extended; /* set if extended local header */ - -/* Macros for getting two-byte and four-byte header values */ -#define SH(p) ((ushort)(uchar)((p)[0]) | ((ushort)(uchar)((p)[1]) << 8)) -#define LG(p) ((ulong)(SH(p)) | ((ulong)(SH((p)+2)) << 16)) + This code is based heavily on David Greenman's if_ed.c driver and + Andres Vega Garcia's if_ep.c driver. -/* - * Check zip file and advance inptr to the start of the compressed data. - * Get ofname from the local header if necessary. - */ -void check_zipfile() + Copyright (C) 1993-1994, David Greenman, Martin Renters. + Copyright (C) 1993-1995, Andres Vega Garcia. + Copyright (C) 1995, Serge Babkin. + This software may be used, modified, copied, distributed, and sold, in + both source and binary form provided that the above copyright and these + terms are retained. Under no circumstances are the authors responsible for + the proper functioning of this software, nor do the authors assume any + responsibility for damages incurred with its use. + +3c509 support added by Serge Babkin (babkin@hq.icb.chel.su) + +$Id$ + +***************************************************************************/ + +/* #define EDEBUG */ + +#include "netboot.h" +#include "3c509.h" + +short aui; +char bnc=0, utp=0; /* for 3C509 */ +unsigned short eth_nic_base; +unsigned short eth_asic_base; +unsigned short eth_base; +unsigned char eth_tx_start; +unsigned char eth_laar; +unsigned char eth_flags; +unsigned char eth_vendor; +unsigned char eth_memsize; +unsigned char *eth_bmem; +unsigned char *eth_rmem; +unsigned char *eth_node_addr; + +static send_ID_sequence(); +static get_eeprom_data(); +static get_e(); + +/************************************************************************** +The following two variables are used externally +***************************************************************************/ +char packet[ETHER_MAX_LEN]; +int packetlen; + +/*********************** Name of driver *********************************/ + +char eth_driver[]="ep0"; + +/************************************************************************** +ETH_PROBE - Look for an adapter +***************************************************************************/ +eth_probe() +{ + /* common variables */ + int i; + /* variables for 3C509 */ + int data, j, io_base, id_port = EP_ID_PORT; + int nisa = 0, neisa = 0; + u_short k; + int ep_current_tag = EP_LAST_TAG + 1; + short *p; + + eth_vendor = VENDOR_NONE; + + /********************************************************* + Search for 3Com 509 card + ***********************************************************/ + + /* Look for the EISA boards, leave them activated */ + /* search for the first card, ignore all others */ + for(j = 1; j < 16 && eth_vendor==VENDOR_NONE ; j++) { + io_base = (j * EP_EISA_START) | EP_EISA_W0; + if (inw(io_base + EP_W0_MFG_ID) != MFG_ID) + continue; + + /* we must found 0x1f if the board is EISA configurated */ + if ((inw(io_base + EP_W0_ADDRESS_CFG) & 0x1f) != 0x1f) + continue; + + /* Reset and Enable the card */ + outb(io_base + EP_W0_CONFIG_CTRL, W0_P4_CMD_RESET_ADAPTER); + DELAY(1000); /* we must wait at least 1 ms */ + outb(io_base + EP_W0_CONFIG_CTRL, W0_P4_CMD_ENABLE_ADAPTER); + + /* + * Once activated, all the registers are mapped in the range + * x000 - x00F, where x is the slot number. + */ + eth_base = j * EP_EISA_START; + eth_vendor = VENDOR_3C509; + } + ep_current_tag--; + + /* Look for the ISA boards. Init and leave them actived */ + /* search for the first card, ignore all others */ + outb(id_port, 0xc0); /* Global reset */ + DELAY(1000); + for (i = 0; i < EP_MAX_BOARDS && eth_vendor==VENDOR_NONE; i++) { + outb(id_port, 0); + outb(id_port, 0); + send_ID_sequence(id_port); + + data = get_eeprom_data(id_port, EEPROM_MFG_ID); + if (data != MFG_ID) + break; + + /* resolve contention using the Ethernet address */ + for (j = 0; j < 3; j++) + data = get_eeprom_data(id_port, j); + + eth_base = + (get_eeprom_data(id_port, EEPROM_ADDR_CFG) & 0x1f) * 0x10 + 0x200; + outb(id_port, ep_current_tag); /* tags board */ + outb(id_port, ACTIVATE_ADAPTER_TO_CONFIG); + eth_vendor = VENDOR_3C509; + ep_current_tag--; + } + + if(eth_vendor != VENDOR_3C509) + goto no3c509; + + /* + * The iobase was found and MFG_ID was 0x6d50. PROD_ID should be + * 0x9[0-f]50 + */ + GO_WINDOW(0); + k = get_e(EEPROM_PROD_ID); + if ((k & 0xf0ff) != (PROD_ID & 0xf0ff)) + goto no3c509; + + if(eth_base >= EP_EISA_START) { + printf("3C5x9 board on EISA at 0x%x - ",eth_base); + } else { + printf("3C5x9 board on ISA at 0x%x - ",eth_base); + } + + /* test for presence of connectors */ + i = inw(IS_BASE + EP_W0_CONFIG_CTRL); + j = inw(IS_BASE + EP_W0_ADDRESS_CFG) >> 14; + + switch(j) { + case 0: + if(i & IS_UTP) { + printf("10baseT\r\n"); + utp=1; + } + else { + printf("10baseT not present\r\n"); + eth_vendor=VENDOR_NONE; + goto no3c509; + } + + break; + case 1: + if(i & IS_AUI) + printf("10base5\r\n"); + else { + printf("10base5 not present\r\n"); + eth_vendor=VENDOR_NONE; + goto no3c509; + } + + break; + case 3: + if(i & IS_BNC) { + printf("10base2\r\n"); + bnc=1; + } + else { + printf("10base2 not present\r\n"); + eth_vendor=VENDOR_NONE; + goto no3c509; + } + + break; + default: + printf("unknown connector\r\n"); + eth_vendor=VENDOR_NONE; + goto no3c509; + } + /* + * Read the station address from the eeprom + */ + p = (u_short *) arptable[ARP_CLIENT].node; + for (i = 0; i < 3; i++) { + GO_WINDOW(0); + p[i] = htons(get_e(i)); + GO_WINDOW(2); + outw(BASE + EP_W2_ADDR_0 + (i * 2), ntohs(p[i])); + } + + printf("Ethernet address: "); + for(i=0; i<5; i++) { + printf("%b:",arptable[ARP_CLIENT].node[i]); + } + printf("%b\n",arptable[ARP_CLIENT].node[i]); + + eth_node_addr = arptable[ARP_CLIENT].node; + eth_reset(); + return eth_vendor; +no3c509: + eth_vendor = VENDOR_NONE; + + return VENDOR_NONE; +} + +/************************************************************************** +ETH_RESET - Reset adapter +***************************************************************************/ +eth_reset() { - uchar *h = inbuf + inptr; /* first local header */ + int s, i; + + /*********************************************************** + Reset 3Com 509 card + *************************************************************/ + + if(eth_vendor != VENDOR_3C509) + goto no3c509; - /* Check validity of local header, and skip name and extra fields */ - inptr += LOCHDR + SH(h + LOCFIL) + SH(h + LOCEXT); + /* stop card */ + outw(BASE + EP_COMMAND, RX_DISABLE); + outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK); + while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS); + outw(BASE + EP_COMMAND, TX_DISABLE); + outw(BASE + EP_COMMAND, STOP_TRANSCEIVER); + outw(BASE + EP_COMMAND, RX_RESET); + outw(BASE + EP_COMMAND, TX_RESET); + outw(BASE + EP_COMMAND, C_INTR_LATCH); + outw(BASE + EP_COMMAND, SET_RD_0_MASK); + outw(BASE + EP_COMMAND, SET_INTR_MASK); + outw(BASE + EP_COMMAND, SET_RX_FILTER); - if (inptr > insize || LG(h) != LOCSIG) - error("input not a zip"); + /* + /* initialize card + */ + while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS); - method = h[LOCHOW]; - if (method != STORED && method != DEFLATED) - error("first entry not deflated or stored--can't extract"); + GO_WINDOW(0); - /* If entry encrypted, decrypt and validate encryption header */ - if (h[LOCFLG] & CRPFLG) - error("encrypted file"); + /* Disable the card */ + outw(BASE + EP_W0_CONFIG_CTRL, 0); + + /* Configure IRQ to none */ + outw(BASE + EP_W0_RESOURCE_CFG, SET_IRQ(0)); + + /* Enable the card */ + outw(BASE + EP_W0_CONFIG_CTRL, ENABLE_DRQ_IRQ); + + GO_WINDOW(2); + + /* Reload the ether_addr. */ + for (i = 0; i < 6; i++) + outb(BASE + EP_W2_ADDR_0 + i, arptable[ARP_CLIENT].node[i]); + + outw(BASE + EP_COMMAND, RX_RESET); + outw(BASE + EP_COMMAND, TX_RESET); + + /* Window 1 is operating window */ + GO_WINDOW(1); + for (i = 0; i < 31; i++) + inb(BASE + EP_W1_TX_STATUS); + + /* get rid of stray intr's */ + outw(BASE + EP_COMMAND, ACK_INTR | 0xff); + + outw(BASE + EP_COMMAND, SET_RD_0_MASK | S_5_INTS); + + outw(BASE + EP_COMMAND, SET_INTR_MASK | S_5_INTS); + + outw(BASE + EP_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL | + FIL_BRDCST); + + /* configure BNC */ + if(bnc) { + outw(BASE + EP_COMMAND, START_TRANSCEIVER); + DELAY(1000); + } + /* configure UTP */ + if(utp) { + GO_WINDOW(4); + outw(BASE + EP_W4_MEDIA_TYPE, ENABLE_UTP); + GO_WINDOW(1); + } + + /* start tranciever and receiver */ + outw(BASE + EP_COMMAND, RX_ENABLE); + outw(BASE + EP_COMMAND, TX_ENABLE); + + /* set early threshold for minimal packet length */ + outw(BASE + EP_COMMAND, SET_RX_EARLY_THRESH | 64); + + outw(BASE + EP_COMMAND, SET_TX_START_THRESH | 16); + + return 1; +no3c509: - /* Save flags for unzip() */ - extended = (h[LOCFLG] & EXTFLG) != 0; - pkzip = 1; } -int -Flush (void *nu, u_char *buf, u_long cnt) +/************************************************************************** +ETH_TRANSMIT - Transmit a frame +***************************************************************************/ +static const char padmap[] = { + 0, 3, 2, 1}; + +eth_transmit(d,t,s,p) +char *d; /* Destination */ +unsigned short t; /* Type */ +unsigned short s; /* size */ +char *p; /* Packet */ { - outcnt = cnt; - flush_window(); + register u_int len; + int pad; + int status; + unsigned char c; + + if(eth_vendor != VENDOR_3C509) + goto no3c509; + +#ifdef EDEBUG + printf("{l=%d,t=%x}",s+14,t); +#endif + + /* swap bytes of type */ + t=(( t&0xFF )<<8) | ((t>>8) & 0xFF); + + len=s+14; /* actual length of packet */ + pad = padmap[len & 3]; + + /* + * The 3c509 automatically pads short packets to minimum ethernet length, + * but we drop packets that are too large. Perhaps we should truncate + * them instead? + */ + if (len + pad > ETHER_MAX_LEN) { + return 0; + } + + /* drop acknowledgements */ + while(( status=inb(BASE + EP_W1_TX_STATUS) )& TXS_COMPLETE ) { + if(status & (TXS_UNDERRUN|TXS_MAX_COLLISION|TXS_STATUS_OVERFLOW)) { + outw(BASE + EP_COMMAND, TX_RESET); + outw(BASE + EP_COMMAND, TX_ENABLE); + } + + outb(BASE + EP_W1_TX_STATUS, 0x0); + } + + while (inw(BASE + EP_W1_FREE_TX) < len + pad + 4) { + /* no room in FIFO */ + } + + outw(BASE + EP_W1_TX_PIO_WR_1, len); + outw(BASE + EP_W1_TX_PIO_WR_1, 0x0); /* Second dword meaningless */ + + /* write packet */ + outsw(BASE + EP_W1_TX_PIO_WR_1, d, 3); + outsw(BASE + EP_W1_TX_PIO_WR_1, eth_node_addr, 3); + outw(BASE + EP_W1_TX_PIO_WR_1, t); + outsw(BASE + EP_W1_TX_PIO_WR_1, p, s / 2); + if (s & 1) + outb(BASE + EP_W1_TX_PIO_WR_1, *(p+s - 1)); + + while (pad--) + outb(BASE + EP_W1_TX_PIO_WR_1, 0); /* Padding */ + + /* timeout after sending */ + DELAY(1000); return 0; +no3c509: } -int -NextByte (void *nu) +/************************************************************************** +ETH_POLL - Wait for a frame +***************************************************************************/ +eth_poll() { - return ((int) get_byte ()); + /* common variables */ + unsigned short type = 0; + unsigned short len; + /* variables for 3C509 */ + struct ether_header *eh; + int lenthisone; + short rx_fifo2, status, cst; + register short rx_fifo; + + if(eth_vendor!=VENDOR_3C509) + goto no3c509; + + cst=inw(BASE + EP_STATUS); + +#ifdef EDEBUG + if(cst & 0x1FFF) + printf("-%x-",cst); +#endif + + if( (cst & (S_RX_COMPLETE|S_RX_EARLY) )==0 ) { + /* acknowledge everything */ + outw(BASE + EP_COMMAND, ACK_INTR| (cst & S_5_INTS)); + outw(BASE + EP_COMMAND, C_INTR_LATCH); + + return 0; + } + + status = inw(BASE + EP_W1_RX_STATUS); +#ifdef EDEBUG + printf("*%x*",status); +#endif + + if (status & ERR_RX) { + outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK); + return 0; + } + + rx_fifo = status & RX_BYTES_MASK; + if (rx_fifo==0) + return 0; + + /* read packet */ +#ifdef EDEBUG + printf("[l=%d",rx_fifo); +#endif + insw(BASE + EP_W1_RX_PIO_RD_1, packet, rx_fifo / 2); + if(rx_fifo & 1) + packet[rx_fifo-1]=inb(BASE + EP_W1_RX_PIO_RD_1); + packetlen=rx_fifo; + + while(1) { + status = inw(BASE + EP_W1_RX_STATUS); +#ifdef EDEBUG + printf("*%x*",status); +#endif + rx_fifo = status & RX_BYTES_MASK; + + if(rx_fifo>0) { + insw(BASE + EP_W1_RX_PIO_RD_1, packet+packetlen, rx_fifo / 2); + if(rx_fifo & 1) + packet[packetlen+rx_fifo-1]=inb(BASE + EP_W1_RX_PIO_RD_1); + packetlen+=rx_fifo; +#ifdef EDEBUG + printf("+%d",rx_fifo); +#endif + } + + if(( status & RX_INCOMPLETE )==0) { +#ifdef EDEBUG + printf("=%d",packetlen); +#endif + break; + } + + DELAY(1000); + } + + /* acknowledge reception of packet */ + outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK); + while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS); + + type = (packet[12]<<8) | packet[13]; + +#ifdef EDEBUG + if(packet[0]+packet[1]+packet[2]+packet[3]+packet[4]+ + packet[5] == 0xFF*6) + printf(",t=0x%x,b]",type); + else + printf(",t=0x%x]",type); +#endif + + + if (type == ARP) { + struct arprequest *arpreq; + unsigned long reqip; + + arpreq = (struct arprequest *)&packet[ETHER_HDR_LEN]; + +#ifdef EDEBUG + printf("(ARP %I->%I)",ntohl(*(int*)arpreq->sipaddr), + ntohl(*(int*)arpreq->tipaddr)); +#endif + + convert_ipaddr(&reqip, arpreq->tipaddr); + if ((ntohs(arpreq->opcode) == ARP_REQUEST) && + (reqip == arptable[ARP_CLIENT].ipaddr)) { + arpreq->opcode = htons(ARP_REPLY); + bcopy(arpreq->sipaddr, arpreq->tipaddr, 4); + bcopy(arpreq->shwaddr, arpreq->thwaddr, 6); + bcopy(arptable[ARP_CLIENT].node, arpreq->shwaddr, 6); + convert_ipaddr(arpreq->sipaddr, &reqip); + eth_transmit(arpreq->thwaddr, ARP, sizeof(struct arprequest), + arpreq); + return(0); + } + } else if(type==IP) { + struct iphdr *iph; + + iph = (struct iphdr *)&packet[ETHER_HDR_LEN]; +#ifdef EDEBUG + printf("(IP %I-%d->%I)",ntohl(*(int*)iph->src), + ntohs(iph->protocol),ntohl(*(int*)iph->dest)); +#endif + } + + return 1; + +no3c509: } -struct inflate infl; /* put it into the BSS */ + +/************************************************************************* + 3Com 509 - specific routines +**************************************************************************/ + +static int +eeprom_rdy() +{ + int i; + + for (i = 0; is_eeprom_busy(IS_BASE) && i < MAX_EEPROMBUSY; i++); + if (i >= MAX_EEPROMBUSY) { + printf("3c509: eeprom failed to come ready.\r\n"); + return (0); + } + return (1); +} /* - * Unzip in to out. This routine works on both gzip and pkzip files. - * - * IN assertions: the buffer inbuf contains already the beginning of - * the compressed data, from offsets inptr to insize-1 included. - * The magic header has already been checked. The output buffer is cleared. + * get_e: gets a 16 bits word from the EEPROM. we must have set the window + * before */ - -void unzip() +static int +get_e(offset) +int offset; { - ulong orig_crc = 0; /* original crc */ - ulong orig_len = 0; /* original uncompressed length */ - uchar buf[EXTHDR]; /* extended local header */ - int n, res; + if (!eeprom_rdy()) + return (0xffff); + outw(IS_BASE + EP_W0_EEPROM_COMMAND, EEPROM_CMD_RD | offset); + if (!eeprom_rdy()) + return (0xffff); + return (inw(IS_BASE + EP_W0_EEPROM_DATA)); +} - crc = 0xffffffffL; /* initialize crc */ +static int +send_ID_sequence(port) +int port; +{ + int cx, al; - if (pkzip && !extended) { /* crc and length at the end otherwise */ - orig_crc = LG(inbuf + LOCCRC); - orig_len = LG(inbuf + LOCLEN); + for (al = 0xff, cx = 0; cx < 255; cx++) { + outb(port, al); + al <<= 1; + if (al & 0x100) + al ^= 0xcf; } + return (1); +} - if (method != DEFLATED) - error("internal error, invalid method"); - infl.gz_input = NextByte; - infl.gz_output = Flush; - infl.gz_slide = window; - res = inflate (&infl); - if (res == 3) - error("out of memory"); - else if (res != 0) - error("invalid compressed format"); - - /* Get the crc and original length */ - if (!pkzip) { - /* crc32 (see algorithm.doc) - * uncompressed input size modulo 2^32 - */ - for (n = 0; n < 8; n++) - buf[n] = get_byte(); /* may cause an error if EOF */ - orig_crc = LG(buf); - orig_len = LG(buf+4); - - } else if (extended) { /* If extended header, check it */ - /* signature - 4bytes: 0x50 0x4b 0x07 0x08 - * CRC-32 value - * compressed size 4-bytes - * uncompressed size 4-bytes - */ - for (n = 0; n < EXTHDR; n++) - buf[n] = get_byte(); /* may cause an error if EOF */ - orig_crc = LG(buf+4); - orig_len = LG(buf+12); - } - /* Validate decompression */ - if (orig_crc != (crc ^ 0xffffffffL)) - error("crc error"); - if (orig_len != output_ptr) - error("length error"); +/* + * We get eeprom data from the id_port given an offset into the eeprom. + * Basically; after the ID_sequence is sent to all of the cards; they enter + * the ID_CMD state where they will accept command requests. 0x80-0xbf loads + * the eeprom data. We then read the port 16 times and with every read; the + * cards check for contention (ie: if one card writes a 0 bit and another + * writes a 1 bit then the host sees a 0. At the end of the cycle; each card + * compares the data on the bus; if there is a difference then that card goes + * into ID_WAIT state again). In the meantime; one bit of data is returned in + * the AX register which is conveniently returned to us by inb(). Hence; we + * read 16 times getting one bit of data with each read. + */ +static int +get_eeprom_data(id_port, offset) +int id_port; +int offset; +{ + int i, data = 0; + outb(id_port, 0x80 + offset); + DELAY(1000); + for (i = 0; i < 16; i++) + data = (data << 1) | (inw(id_port) & 1); + return (data); +} - /* Check if there are more entries in a pkzip file */ - if (pkzip && inptr+4 < insize && LG(inbuf+inptr) == LOCSIG) - error("zip file has more than one entry"); +/* a surrogate */ + +DELAY(val) +{ + int c; + + for(c=0; c<val; c+=20) { + twiddle(); + } } + |