summaryrefslogtreecommitdiffstats
path: root/sys
diff options
context:
space:
mode:
authorpeter <peter@FreeBSD.org>2000-01-08 17:51:33 +0000
committerpeter <peter@FreeBSD.org>2000-01-08 17:51:33 +0000
commit8148de2437ba0520f708210dfb766377a11a04d4 (patch)
tree025e23f67f21dfd3d267bb05b3ddc679952d6ab7 /sys
parent914c86f25f6f1a4fee9b74afbe179f473e97ebba (diff)
downloadFreeBSD-src-8148de2437ba0520f708210dfb766377a11a04d4.zip
FreeBSD-src-8148de2437ba0520f708210dfb766377a11a04d4.tar.gz
config(8) doesn't know anything about scsi devices like it used to, remove
the misleading comments to that effect. Prune bogus 'at foo?' (smbus, iicbus, ppbus) appendages on things that they are meaningless for. It was just eye candy and wasn't used by anything in the tree. The interconnects were defined by the drivers themselves and auto discovery. (The new ppbus code may change this if it uses the resource_get_*() calls to find it's configured children if self discovery isn't possible)
Diffstat (limited to 'sys')
-rw-r--r--sys/conf/NOTES34
-rw-r--r--sys/i386/conf/LINT34
-rw-r--r--sys/i386/conf/NOTES34
3 files changed, 42 insertions, 60 deletions
diff --git a/sys/conf/NOTES b/sys/conf/NOTES
index cde28d2..e29a931 100644
--- a/sys/conf/NOTES
+++ b/sys/conf/NOTES
@@ -750,13 +750,7 @@ device da0 #SCSI direct access devices (aka disks)
device sa0 #SCSI tapes
device cd0 #SCSI CD-ROMs
device pass0 #CAM passthrough driver
-
-# The previous devices (ch, da, st, cd) are recognized by config.
-# config doesn't (and shouldn't) know about these newer ones,
-# so we have to specify that they are on a SCSI bus with the "at scbus?"
-# clause.
-
-device pt0 at scbus? # SCSI processor type
+device pt0 #SCSI processor type
# CAM OPTIONS:
# debugging options:
@@ -1924,11 +1918,11 @@ options POWERFAIL_NMI # make it beep instead of panicing
# intpm Intel PIIX4 Power Management Unit
# alpm Acer Aladdin-IV/V/Pro2 Power Management Unit
#
-device smbus0
+device smbus0 # Bus support, required for smb below.
device intpm0
device alpm0
-device smb0 at smbus?
+device smb0
#
# I2C Bus
@@ -1947,12 +1941,12 @@ device smb0 at smbus?
# Other:
# iicbb generic I2C bit-banging code (needed by lpbb, bktr)
#
-device iicbus0
+device iicbus0 # Bus support, required for ic/iic/iicsmb below.
device iicbb0
-device ic0 at iicbus?
-device iic0 at iicbus?
-device iicsmb0 at iicbus?
+device ic0
+device iic0
+device iicsmb0 # smb over i2c bridge
device pcf0 at isa? port 0x320 irq 5
@@ -2129,13 +2123,13 @@ options LPT_DEBUG # Printer driver debug
options PPC_DEBUG # Parallel chipset level debug
options PLIP_DEBUG # Parallel network IP interface debug
-device ppbus0
-device vpo0 at ppbus?
-device lpt0 at ppbus?
-device plip0 at ppbus?
-device ppi0 at ppbus?
-device pps0 at ppbus?
-device lpbb0 at ppbus?
+device ppbus0 # Bus support, required for drivers below.
+device vpo0
+device lpt0
+device plip0
+device ppi0
+device pps0
+device lpbb0
device ppc0 at isa? port? irq 7
diff --git a/sys/i386/conf/LINT b/sys/i386/conf/LINT
index cde28d2..e29a931 100644
--- a/sys/i386/conf/LINT
+++ b/sys/i386/conf/LINT
@@ -750,13 +750,7 @@ device da0 #SCSI direct access devices (aka disks)
device sa0 #SCSI tapes
device cd0 #SCSI CD-ROMs
device pass0 #CAM passthrough driver
-
-# The previous devices (ch, da, st, cd) are recognized by config.
-# config doesn't (and shouldn't) know about these newer ones,
-# so we have to specify that they are on a SCSI bus with the "at scbus?"
-# clause.
-
-device pt0 at scbus? # SCSI processor type
+device pt0 #SCSI processor type
# CAM OPTIONS:
# debugging options:
@@ -1924,11 +1918,11 @@ options POWERFAIL_NMI # make it beep instead of panicing
# intpm Intel PIIX4 Power Management Unit
# alpm Acer Aladdin-IV/V/Pro2 Power Management Unit
#
-device smbus0
+device smbus0 # Bus support, required for smb below.
device intpm0
device alpm0
-device smb0 at smbus?
+device smb0
#
# I2C Bus
@@ -1947,12 +1941,12 @@ device smb0 at smbus?
# Other:
# iicbb generic I2C bit-banging code (needed by lpbb, bktr)
#
-device iicbus0
+device iicbus0 # Bus support, required for ic/iic/iicsmb below.
device iicbb0
-device ic0 at iicbus?
-device iic0 at iicbus?
-device iicsmb0 at iicbus?
+device ic0
+device iic0
+device iicsmb0 # smb over i2c bridge
device pcf0 at isa? port 0x320 irq 5
@@ -2129,13 +2123,13 @@ options LPT_DEBUG # Printer driver debug
options PPC_DEBUG # Parallel chipset level debug
options PLIP_DEBUG # Parallel network IP interface debug
-device ppbus0
-device vpo0 at ppbus?
-device lpt0 at ppbus?
-device plip0 at ppbus?
-device ppi0 at ppbus?
-device pps0 at ppbus?
-device lpbb0 at ppbus?
+device ppbus0 # Bus support, required for drivers below.
+device vpo0
+device lpt0
+device plip0
+device ppi0
+device pps0
+device lpbb0
device ppc0 at isa? port? irq 7
diff --git a/sys/i386/conf/NOTES b/sys/i386/conf/NOTES
index cde28d2..e29a931 100644
--- a/sys/i386/conf/NOTES
+++ b/sys/i386/conf/NOTES
@@ -750,13 +750,7 @@ device da0 #SCSI direct access devices (aka disks)
device sa0 #SCSI tapes
device cd0 #SCSI CD-ROMs
device pass0 #CAM passthrough driver
-
-# The previous devices (ch, da, st, cd) are recognized by config.
-# config doesn't (and shouldn't) know about these newer ones,
-# so we have to specify that they are on a SCSI bus with the "at scbus?"
-# clause.
-
-device pt0 at scbus? # SCSI processor type
+device pt0 #SCSI processor type
# CAM OPTIONS:
# debugging options:
@@ -1924,11 +1918,11 @@ options POWERFAIL_NMI # make it beep instead of panicing
# intpm Intel PIIX4 Power Management Unit
# alpm Acer Aladdin-IV/V/Pro2 Power Management Unit
#
-device smbus0
+device smbus0 # Bus support, required for smb below.
device intpm0
device alpm0
-device smb0 at smbus?
+device smb0
#
# I2C Bus
@@ -1947,12 +1941,12 @@ device smb0 at smbus?
# Other:
# iicbb generic I2C bit-banging code (needed by lpbb, bktr)
#
-device iicbus0
+device iicbus0 # Bus support, required for ic/iic/iicsmb below.
device iicbb0
-device ic0 at iicbus?
-device iic0 at iicbus?
-device iicsmb0 at iicbus?
+device ic0
+device iic0
+device iicsmb0 # smb over i2c bridge
device pcf0 at isa? port 0x320 irq 5
@@ -2129,13 +2123,13 @@ options LPT_DEBUG # Printer driver debug
options PPC_DEBUG # Parallel chipset level debug
options PLIP_DEBUG # Parallel network IP interface debug
-device ppbus0
-device vpo0 at ppbus?
-device lpt0 at ppbus?
-device plip0 at ppbus?
-device ppi0 at ppbus?
-device pps0 at ppbus?
-device lpbb0 at ppbus?
+device ppbus0 # Bus support, required for drivers below.
+device vpo0
+device lpt0
+device plip0
+device ppi0
+device pps0
+device lpbb0
device ppc0 at isa? port? irq 7
OpenPOWER on IntegriCloud