Print the clock calibration messages all on one (long) line again so

that they are easy to grep for.

Removed now-unused i586 counter variables.

Fixed some style bugs.

5 files changed, 90 insertions, 105 deletions

diff --git a/sys/amd64/amd64/tsc.c b/sys/amd64/amd64/tsc.c
index 17e8732..cb85c35 100644
--- a/sys/amd64/amd64/tsc.c
+++ b/sys/amd64/amd64/tsc.c
@@ -34,7 +34,11 @@
  * SUCH DAMAGE.
  *
  *	from: @(#)clock.c	7.2 (Berkeley) 5/12/91
- *	$Id: clock.c,v 1.69 1996/09/14 10:53:34 bde Exp $
+ *	$Id: clock.c,v 1.70 1996/10/09 19:47:31 bde Exp $
+ */
+
+/*
+ * Routines to handle clock hardware.
  */
 
 /*
@@ -44,10 +48,6 @@
  * reintroduced and updated by Chris Stenton <chris@gnome.co.uk> 8/10/94
  */
 
-/*
- * Primitive clock interrupt routines.
- */
-
 #include "opt_clock.h"
 #include "opt_cpu.h"
 
@@ -99,16 +99,12 @@
 
 int	adjkerntz;		/* local offset	from GMT in seconds */
 int	disable_rtc_set;	/* disable resettodr() if != 0 */
-int	wall_cmos_clock;	/* wall	CMOS clock assumed if != 0 */
-
 u_int	idelayed;
 #if defined(I586_CPU) || defined(I686_CPU)
-u_int 	i586_ctr_bias;
+u_int	i586_ctr_bias;
 u_int	i586_ctr_comultiplier;
 u_int	i586_ctr_freq;
 u_int	i586_ctr_multiplier;
-long long	i586_last_tick;
-unsigned long	i586_avg_tick;
 #endif
 int	statclock_disable;
 u_int	stat_imask = SWI_CLOCK_MASK;
@@ -117,22 +113,23 @@ u_int	timer_freq = TIMER_FREQ;
 #else
 u_int	timer_freq = 1193182;
 #endif
-int 	timer0_max_count;
-u_int 	timer0_overflow_threshold;
-u_int 	timer0_prescaler_count;
+int	timer0_max_count;
+u_int	timer0_overflow_threshold;
+u_int	timer0_prescaler_count;
+int	wall_cmos_clock;	/* wall	CMOS clock assumed if != 0 */
 
 static	int	beeping = 0;
 static	u_int	clk_imask = HWI_MASK | SWI_MASK;
 static	const u_char daysinmonth[] = {31,28,31,30,31,30,31,31,30,31,30,31};
-static 	u_int	hardclock_max_count;
+static	u_int	hardclock_max_count;
 /*
  * XXX new_function and timer_func should not handle clockframes, but
  * timer_func currently needs to hold hardclock to handle the
  * timer0_state == 0 case.  We should use register_intr()/unregister_intr()
  * to switch between clkintr() and a slightly different timerintr().
  */
-static 	void	(*new_function) __P((struct clockframe *frame));
-static 	u_int	new_rate;
+static	void	(*new_function) __P((struct clockframe *frame));
+static	u_int	new_rate;
 static	u_char	rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF;
 static	u_char	rtc_statusb = RTCSB_24HR | RTCSB_PINTR;
 
@@ -144,7 +141,7 @@ static	u_char	rtc_statusb = RTCSB_24HR | RTCSB_PINTR;
 
 static	u_char	timer0_state;
 static	u_char	timer2_state;
-static 	void	(*timer_func) __P((struct clockframe *frame)) = hardclock;
+static	void	(*timer_func) __P((struct clockframe *frame)) = hardclock;
 
 #if defined(I586_CPU) || defined(I686_CPU)
 static	void	set_i586_ctr_freq(u_int i586_freq, u_int i8254_freq);
@@ -347,7 +344,7 @@ getit(void)
 	disable_intr();
 
 	/* Select timer0 and latch counter value. */
-	outb(TIMER_MODE, TIMER_SEL0);
+	outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH);
 
 	low = inb(TIMER_CNTR0);
 	high = inb(TIMER_CNTR0);
@@ -489,7 +486,7 @@ calibrate_clocks(void)
 	u_int count, prev_count, tot_count;
 	int sec, start_sec, timeout;
 
-	printf("Calibrating clock(s) relative to mc146818A clock...\n");
+	printf("Calibrating clock(s) relative to mc146818A clock ... ");
 	if (!(rtcin(RTC_STATUSD) & RTCSD_PWR))
 		goto fail;
 	timeout = 100000000;
@@ -622,7 +619,7 @@ startrtclock()
 	if (delta < timer_freq / 100) {
 #ifndef CLK_USE_I8254_CALIBRATION
 		if (bootverbose)
-		    printf(
+			printf(
 "CLK_USE_I8254_CALIBRATION not specified - using default frequency\n");
 		freq = timer_freq;
 #endif
@@ -641,7 +638,7 @@ startrtclock()
 #ifndef CLK_USE_I586_CALIBRATION
 	if (i586_ctr_freq != 0) {
 		if (bootverbose)
-		    printf(
+			printf(
 "CLK_USE_I586_CALIBRATION not specified - using old calibration method\n");
 		i586_ctr_freq = 0;
 	}
diff --git a/sys/amd64/isa/clock.c b/sys/amd64/isa/clock.c
index 17e8732..cb85c35 100644
--- a/sys/amd64/isa/clock.c
+++ b/sys/amd64/isa/clock.c
@@ -34,7 +34,11 @@
  * SUCH DAMAGE.
  *
  *	from: @(#)clock.c	7.2 (Berkeley) 5/12/91
- *	$Id: clock.c,v 1.69 1996/09/14 10:53:34 bde Exp $
+ *	$Id: clock.c,v 1.70 1996/10/09 19:47:31 bde Exp $
+ */
+
+/*
+ * Routines to handle clock hardware.
  */
 
 /*
@@ -44,10 +48,6 @@
  * reintroduced and updated by Chris Stenton <chris@gnome.co.uk> 8/10/94
  */
 
-/*
- * Primitive clock interrupt routines.
- */
-
 #include "opt_clock.h"
 #include "opt_cpu.h"
 
@@ -99,16 +99,12 @@
 
 int	adjkerntz;		/* local offset	from GMT in seconds */
 int	disable_rtc_set;	/* disable resettodr() if != 0 */
-int	wall_cmos_clock;	/* wall	CMOS clock assumed if != 0 */
-
 u_int	idelayed;
 #if defined(I586_CPU) || defined(I686_CPU)
-u_int 	i586_ctr_bias;
+u_int	i586_ctr_bias;
 u_int	i586_ctr_comultiplier;
 u_int	i586_ctr_freq;
 u_int	i586_ctr_multiplier;
-long long	i586_last_tick;
-unsigned long	i586_avg_tick;
 #endif
 int	statclock_disable;
 u_int	stat_imask = SWI_CLOCK_MASK;
@@ -117,22 +113,23 @@ u_int	timer_freq = TIMER_FREQ;
 #else
 u_int	timer_freq = 1193182;
 #endif
-int 	timer0_max_count;
-u_int 	timer0_overflow_threshold;
-u_int 	timer0_prescaler_count;
+int	timer0_max_count;
+u_int	timer0_overflow_threshold;
+u_int	timer0_prescaler_count;
+int	wall_cmos_clock;	/* wall	CMOS clock assumed if != 0 */
 
 static	int	beeping = 0;
 static	u_int	clk_imask = HWI_MASK | SWI_MASK;
 static	const u_char daysinmonth[] = {31,28,31,30,31,30,31,31,30,31,30,31};
-static 	u_int	hardclock_max_count;
+static	u_int	hardclock_max_count;
 /*
  * XXX new_function and timer_func should not handle clockframes, but
  * timer_func currently needs to hold hardclock to handle the
  * timer0_state == 0 case.  We should use register_intr()/unregister_intr()
  * to switch between clkintr() and a slightly different timerintr().
  */
-static 	void	(*new_function) __P((struct clockframe *frame));
-static 	u_int	new_rate;
+static	void	(*new_function) __P((struct clockframe *frame));
+static	u_int	new_rate;
 static	u_char	rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF;
 static	u_char	rtc_statusb = RTCSB_24HR | RTCSB_PINTR;
 
@@ -144,7 +141,7 @@ static	u_char	rtc_statusb = RTCSB_24HR | RTCSB_PINTR;
 
 static	u_char	timer0_state;
 static	u_char	timer2_state;
-static 	void	(*timer_func) __P((struct clockframe *frame)) = hardclock;
+static	void	(*timer_func) __P((struct clockframe *frame)) = hardclock;
 
 #if defined(I586_CPU) || defined(I686_CPU)
 static	void	set_i586_ctr_freq(u_int i586_freq, u_int i8254_freq);
@@ -347,7 +344,7 @@ getit(void)
 	disable_intr();
 
 	/* Select timer0 and latch counter value. */
-	outb(TIMER_MODE, TIMER_SEL0);
+	outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH);
 
 	low = inb(TIMER_CNTR0);
 	high = inb(TIMER_CNTR0);
@@ -489,7 +486,7 @@ calibrate_clocks(void)
 	u_int count, prev_count, tot_count;
 	int sec, start_sec, timeout;
 
-	printf("Calibrating clock(s) relative to mc146818A clock...\n");
+	printf("Calibrating clock(s) relative to mc146818A clock ... ");
 	if (!(rtcin(RTC_STATUSD) & RTCSD_PWR))
 		goto fail;
 	timeout = 100000000;
@@ -622,7 +619,7 @@ startrtclock()
 	if (delta < timer_freq / 100) {
 #ifndef CLK_USE_I8254_CALIBRATION
 		if (bootverbose)
-		    printf(
+			printf(
 "CLK_USE_I8254_CALIBRATION not specified - using default frequency\n");
 		freq = timer_freq;
 #endif
@@ -641,7 +638,7 @@ startrtclock()
 #ifndef CLK_USE_I586_CALIBRATION
 	if (i586_ctr_freq != 0) {
 		if (bootverbose)
-		    printf(
+			printf(
 "CLK_USE_I586_CALIBRATION not specified - using old calibration method\n");
 		i586_ctr_freq = 0;
 	}
diff --git a/sys/i386/i386/tsc.c b/sys/i386/i386/tsc.c
index 17e8732..cb85c35 100644
--- a/sys/i386/i386/tsc.c
+++ b/sys/i386/i386/tsc.c
@@ -34,7 +34,11 @@
  * SUCH DAMAGE.
  *
  *	from: @(#)clock.c	7.2 (Berkeley) 5/12/91
- *	$Id: clock.c,v 1.69 1996/09/14 10:53:34 bde Exp $
+ *	$Id: clock.c,v 1.70 1996/10/09 19:47:31 bde Exp $
+ */
+
+/*
+ * Routines to handle clock hardware.
  */
 
 /*
@@ -44,10 +48,6 @@
  * reintroduced and updated by Chris Stenton <chris@gnome.co.uk> 8/10/94
  */
 
-/*
- * Primitive clock interrupt routines.
- */
-
 #include "opt_clock.h"
 #include "opt_cpu.h"
 
@@ -99,16 +99,12 @@
 
 int	adjkerntz;		/* local offset	from GMT in seconds */
 int	disable_rtc_set;	/* disable resettodr() if != 0 */
-int	wall_cmos_clock;	/* wall	CMOS clock assumed if != 0 */
-
 u_int	idelayed;
 #if defined(I586_CPU) || defined(I686_CPU)
-u_int 	i586_ctr_bias;
+u_int	i586_ctr_bias;
 u_int	i586_ctr_comultiplier;
 u_int	i586_ctr_freq;
 u_int	i586_ctr_multiplier;
-long long	i586_last_tick;
-unsigned long	i586_avg_tick;
 #endif
 int	statclock_disable;
 u_int	stat_imask = SWI_CLOCK_MASK;
@@ -117,22 +113,23 @@ u_int	timer_freq = TIMER_FREQ;
 #else
 u_int	timer_freq = 1193182;
 #endif
-int 	timer0_max_count;
-u_int 	timer0_overflow_threshold;
-u_int 	timer0_prescaler_count;
+int	timer0_max_count;
+u_int	timer0_overflow_threshold;
+u_int	timer0_prescaler_count;
+int	wall_cmos_clock;	/* wall	CMOS clock assumed if != 0 */
 
 static	int	beeping = 0;
 static	u_int	clk_imask = HWI_MASK | SWI_MASK;
 static	const u_char daysinmonth[] = {31,28,31,30,31,30,31,31,30,31,30,31};
-static 	u_int	hardclock_max_count;
+static	u_int	hardclock_max_count;
 /*
  * XXX new_function and timer_func should not handle clockframes, but
  * timer_func currently needs to hold hardclock to handle the
  * timer0_state == 0 case.  We should use register_intr()/unregister_intr()
  * to switch between clkintr() and a slightly different timerintr().
  */
-static 	void	(*new_function) __P((struct clockframe *frame));
-static 	u_int	new_rate;
+static	void	(*new_function) __P((struct clockframe *frame));
+static	u_int	new_rate;
 static	u_char	rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF;
 static	u_char	rtc_statusb = RTCSB_24HR | RTCSB_PINTR;
 
@@ -144,7 +141,7 @@ static	u_char	rtc_statusb = RTCSB_24HR | RTCSB_PINTR;
 
 static	u_char	timer0_state;
 static	u_char	timer2_state;
-static 	void	(*timer_func) __P((struct clockframe *frame)) = hardclock;
+static	void	(*timer_func) __P((struct clockframe *frame)) = hardclock;
 
 #if defined(I586_CPU) || defined(I686_CPU)
 static	void	set_i586_ctr_freq(u_int i586_freq, u_int i8254_freq);
@@ -347,7 +344,7 @@ getit(void)
 	disable_intr();
 
 	/* Select timer0 and latch counter value. */
-	outb(TIMER_MODE, TIMER_SEL0);
+	outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH);
 
 	low = inb(TIMER_CNTR0);
 	high = inb(TIMER_CNTR0);
@@ -489,7 +486,7 @@ calibrate_clocks(void)
 	u_int count, prev_count, tot_count;
 	int sec, start_sec, timeout;
 
-	printf("Calibrating clock(s) relative to mc146818A clock...\n");
+	printf("Calibrating clock(s) relative to mc146818A clock ... ");
 	if (!(rtcin(RTC_STATUSD) & RTCSD_PWR))
 		goto fail;
 	timeout = 100000000;
@@ -622,7 +619,7 @@ startrtclock()
 	if (delta < timer_freq / 100) {
 #ifndef CLK_USE_I8254_CALIBRATION
 		if (bootverbose)
-		    printf(
+			printf(
 "CLK_USE_I8254_CALIBRATION not specified - using default frequency\n");
 		freq = timer_freq;
 #endif
@@ -641,7 +638,7 @@ startrtclock()
 #ifndef CLK_USE_I586_CALIBRATION
 	if (i586_ctr_freq != 0) {
 		if (bootverbose)
-		    printf(
+			printf(
 "CLK_USE_I586_CALIBRATION not specified - using old calibration method\n");
 		i586_ctr_freq = 0;
 	}
diff --git a/sys/i386/isa/clock.c b/sys/i386/isa/clock.c
index 17e8732..cb85c35 100644
--- a/sys/i386/isa/clock.c
+++ b/sys/i386/isa/clock.c
@@ -34,7 +34,11 @@
  * SUCH DAMAGE.
  *
  *	from: @(#)clock.c	7.2 (Berkeley) 5/12/91
- *	$Id: clock.c,v 1.69 1996/09/14 10:53:34 bde Exp $
+ *	$Id: clock.c,v 1.70 1996/10/09 19:47:31 bde Exp $
+ */
+
+/*
+ * Routines to handle clock hardware.
  */
 
 /*
@@ -44,10 +48,6 @@
  * reintroduced and updated by Chris Stenton <chris@gnome.co.uk> 8/10/94
  */
 
-/*
- * Primitive clock interrupt routines.
- */
-
 #include "opt_clock.h"
 #include "opt_cpu.h"
 
@@ -99,16 +99,12 @@
 
 int	adjkerntz;		/* local offset	from GMT in seconds */
 int	disable_rtc_set;	/* disable resettodr() if != 0 */
-int	wall_cmos_clock;	/* wall	CMOS clock assumed if != 0 */
-
 u_int	idelayed;
 #if defined(I586_CPU) || defined(I686_CPU)
-u_int 	i586_ctr_bias;
+u_int	i586_ctr_bias;
 u_int	i586_ctr_comultiplier;
 u_int	i586_ctr_freq;
 u_int	i586_ctr_multiplier;
-long long	i586_last_tick;
-unsigned long	i586_avg_tick;
 #endif
 int	statclock_disable;
 u_int	stat_imask = SWI_CLOCK_MASK;
@@ -117,22 +113,23 @@ u_int	timer_freq = TIMER_FREQ;
 #else
 u_int	timer_freq = 1193182;
 #endif
-int 	timer0_max_count;
-u_int 	timer0_overflow_threshold;
-u_int 	timer0_prescaler_count;
+int	timer0_max_count;
+u_int	timer0_overflow_threshold;
+u_int	timer0_prescaler_count;
+int	wall_cmos_clock;	/* wall	CMOS clock assumed if != 0 */
 
 static	int	beeping = 0;
 static	u_int	clk_imask = HWI_MASK | SWI_MASK;
 static	const u_char daysinmonth[] = {31,28,31,30,31,30,31,31,30,31,30,31};
-static 	u_int	hardclock_max_count;
+static	u_int	hardclock_max_count;
 /*
  * XXX new_function and timer_func should not handle clockframes, but
  * timer_func currently needs to hold hardclock to handle the
  * timer0_state == 0 case.  We should use register_intr()/unregister_intr()
  * to switch between clkintr() and a slightly different timerintr().
  */
-static 	void	(*new_function) __P((struct clockframe *frame));
-static 	u_int	new_rate;
+static	void	(*new_function) __P((struct clockframe *frame));
+static	u_int	new_rate;
 static	u_char	rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF;
 static	u_char	rtc_statusb = RTCSB_24HR | RTCSB_PINTR;
 
@@ -144,7 +141,7 @@ static	u_char	rtc_statusb = RTCSB_24HR | RTCSB_PINTR;
 
 static	u_char	timer0_state;
 static	u_char	timer2_state;
-static 	void	(*timer_func) __P((struct clockframe *frame)) = hardclock;
+static	void	(*timer_func) __P((struct clockframe *frame)) = hardclock;
 
 #if defined(I586_CPU) || defined(I686_CPU)
 static	void	set_i586_ctr_freq(u_int i586_freq, u_int i8254_freq);
@@ -347,7 +344,7 @@ getit(void)
 	disable_intr();
 
 	/* Select timer0 and latch counter value. */
-	outb(TIMER_MODE, TIMER_SEL0);
+	outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH);
 
 	low = inb(TIMER_CNTR0);
 	high = inb(TIMER_CNTR0);
@@ -489,7 +486,7 @@ calibrate_clocks(void)
 	u_int count, prev_count, tot_count;
 	int sec, start_sec, timeout;
 
-	printf("Calibrating clock(s) relative to mc146818A clock...\n");
+	printf("Calibrating clock(s) relative to mc146818A clock ... ");
 	if (!(rtcin(RTC_STATUSD) & RTCSD_PWR))
 		goto fail;
 	timeout = 100000000;
@@ -622,7 +619,7 @@ startrtclock()
 	if (delta < timer_freq / 100) {
 #ifndef CLK_USE_I8254_CALIBRATION
 		if (bootverbose)
-		    printf(
+			printf(
 "CLK_USE_I8254_CALIBRATION not specified - using default frequency\n");
 		freq = timer_freq;
 #endif
@@ -641,7 +638,7 @@ startrtclock()
 #ifndef CLK_USE_I586_CALIBRATION
 	if (i586_ctr_freq != 0) {
 		if (bootverbose)
-		    printf(
+			printf(
 "CLK_USE_I586_CALIBRATION not specified - using old calibration method\n");
 		i586_ctr_freq = 0;
 	}
diff --git a/sys/isa/atrtc.c b/sys/isa/atrtc.c
index 17e8732..cb85c35 100644
--- a/sys/isa/atrtc.c
+++ b/sys/isa/atrtc.c
@@ -34,7 +34,11 @@
  * SUCH DAMAGE.
  *
  *	from: @(#)clock.c	7.2 (Berkeley) 5/12/91
- *	$Id: clock.c,v 1.69 1996/09/14 10:53:34 bde Exp $
+ *	$Id: clock.c,v 1.70 1996/10/09 19:47:31 bde Exp $
+ */
+
+/*
+ * Routines to handle clock hardware.
  */
 
 /*
@@ -44,10 +48,6 @@
  * reintroduced and updated by Chris Stenton <chris@gnome.co.uk> 8/10/94
  */
 
-/*
- * Primitive clock interrupt routines.
- */
-
 #include "opt_clock.h"
 #include "opt_cpu.h"
 
@@ -99,16 +99,12 @@
 
 int	adjkerntz;		/* local offset	from GMT in seconds */
 int	disable_rtc_set;	/* disable resettodr() if != 0 */
-int	wall_cmos_clock;	/* wall	CMOS clock assumed if != 0 */
-
 u_int	idelayed;
 #if defined(I586_CPU) || defined(I686_CPU)
-u_int 	i586_ctr_bias;
+u_int	i586_ctr_bias;
 u_int	i586_ctr_comultiplier;
 u_int	i586_ctr_freq;
 u_int	i586_ctr_multiplier;
-long long	i586_last_tick;
-unsigned long	i586_avg_tick;
 #endif
 int	statclock_disable;
 u_int	stat_imask = SWI_CLOCK_MASK;
@@ -117,22 +113,23 @@ u_int	timer_freq = TIMER_FREQ;
 #else
 u_int	timer_freq = 1193182;
 #endif
-int 	timer0_max_count;
-u_int 	timer0_overflow_threshold;
-u_int 	timer0_prescaler_count;
+int	timer0_max_count;
+u_int	timer0_overflow_threshold;
+u_int	timer0_prescaler_count;
+int	wall_cmos_clock;	/* wall	CMOS clock assumed if != 0 */
 
 static	int	beeping = 0;
 static	u_int	clk_imask = HWI_MASK | SWI_MASK;
 static	const u_char daysinmonth[] = {31,28,31,30,31,30,31,31,30,31,30,31};
-static 	u_int	hardclock_max_count;
+static	u_int	hardclock_max_count;
 /*
  * XXX new_function and timer_func should not handle clockframes, but
  * timer_func currently needs to hold hardclock to handle the
  * timer0_state == 0 case.  We should use register_intr()/unregister_intr()
  * to switch between clkintr() and a slightly different timerintr().
  */
-static 	void	(*new_function) __P((struct clockframe *frame));
-static 	u_int	new_rate;
+static	void	(*new_function) __P((struct clockframe *frame));
+static	u_int	new_rate;
 static	u_char	rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF;
 static	u_char	rtc_statusb = RTCSB_24HR | RTCSB_PINTR;
 
@@ -144,7 +141,7 @@ static	u_char	rtc_statusb = RTCSB_24HR | RTCSB_PINTR;
 
 static	u_char	timer0_state;
 static	u_char	timer2_state;
-static 	void	(*timer_func) __P((struct clockframe *frame)) = hardclock;
+static	void	(*timer_func) __P((struct clockframe *frame)) = hardclock;
 
 #if defined(I586_CPU) || defined(I686_CPU)
 static	void	set_i586_ctr_freq(u_int i586_freq, u_int i8254_freq);
@@ -347,7 +344,7 @@ getit(void)
 	disable_intr();
 
 	/* Select timer0 and latch counter value. */
-	outb(TIMER_MODE, TIMER_SEL0);
+	outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH);
 
 	low = inb(TIMER_CNTR0);
 	high = inb(TIMER_CNTR0);
@@ -489,7 +486,7 @@ calibrate_clocks(void)
 	u_int count, prev_count, tot_count;
 	int sec, start_sec, timeout;
 
-	printf("Calibrating clock(s) relative to mc146818A clock...\n");
+	printf("Calibrating clock(s) relative to mc146818A clock ... ");
 	if (!(rtcin(RTC_STATUSD) & RTCSD_PWR))
 		goto fail;
 	timeout = 100000000;
@@ -622,7 +619,7 @@ startrtclock()
 	if (delta < timer_freq / 100) {
 #ifndef CLK_USE_I8254_CALIBRATION
 		if (bootverbose)
-		    printf(
+			printf(
 "CLK_USE_I8254_CALIBRATION not specified - using default frequency\n");
 		freq = timer_freq;
 #endif
@@ -641,7 +638,7 @@ startrtclock()
 #ifndef CLK_USE_I586_CALIBRATION
 	if (i586_ctr_freq != 0) {
 		if (bootverbose)
-		    printf(
+			printf(
 "CLK_USE_I586_CALIBRATION not specified - using old calibration method\n");
 		i586_ctr_freq = 0;
 	}